Search Results

Search found 12726 results on 510 pages for 'compatibility mode'.

Page 292/510 | < Previous Page | 288 289 290 291 292 293 294 295 296 297 298 299  | Next Page >

• Internal LTO tape drive becomes hot

  - by claasz

  We use an internal LTO3 tape drive (HP Ultrium 920) in a PC (no particular server hardware) running Linux. The tape drive becomes quite hot - I don't have the exact temperature, but you may touch it for a second or two, then it hurts ;-) This happens when the tape has nothing to do (during reading/writing, it might become even hotter, I haven't checked that). Besides that, the system is working fine. Now I'm wondering Why does the tape becomes so hot? Is this something I need to care about? Is there something like a 'standby' mode for the tape? (I think it should not consume that much energy when it is not used)

  Read the article

• Sharing storage on Linux and Solaris

  - by devlearn

  I'm looking for a solution in order to share a san mounted volume between several hosts running on Linux (RHEL) and/or Solaris (Sparc). Note that I basically need to share a set of directories containing large binary files that are accessed in random R/W mode. I have the following reqs : keep the data on the SAN suitable i/o performances as the software is pretty demanding on IOPS stick to a shared file system as I can't afford a cluster fs (lack of MDS/OSS infrastructure) compression could be really usefull For now I've found only the following candidates : GFS2 , supports Linux only, no compression VxFS , supports Linux and Solaris, compression supported So if you have some suggestions for this list, I'll really welcome them. Thanks in advance,

  Read the article

• Sysprep on Windows 7 for a non-windows admin?

  - by askvictor

  I'm needing to use sysprep to deploy some Windows 7 machines. I can't find any resources that explain this very easily. In particular, I've loaded all of the programs I want for the image onto a computer. If I want to use prepares this for cloning onto 200 other machines, what steps would I need to take? Or do I need to start again, creating the image using 'audit' mode? The machines I'm using come pre-configured from the manufacturer with a host of custom drivers that wouldn't be fun to re-install - I'd rather use their base image to build upon. Cheers, Victor

  Read the article

• Virtual PC - Display Issue with Ubuntu Server

  - by Christopher R

  Hi Everyone, I just did a clean install of Ubuntu Server 9.04 in Virtual PC on the Windows 7 RC, and it seems to be having a bit of an issue with the virtual machine's display adapter. I've tried setting a VGA flag in the GRUB configuration to no avail. This is a guess, but I think it has something to do with the color console mode that gets enabled by default at boot time. The system starts booting just fine (i.e. the console looks "normal" when I'm asked to enter an LVM passphrase, etc.), but then the display goes wonky after a few seconds and I end up with this. Typing commands in bash works just fine: it's not like the system is frozen or anything, I just can't see anything that I type. The console looks exactly the way it does in the image below.

  Read the article

• A PDF viewer for large margins in fullscreen

  - by jmn

  I am looking for a way to pleasantly read PDF files on my widescreen (22" 1680x1050) monitor. My problem with all pdf the PDF-viewer applications I have tried is that they do not handle wide and high margins well. If I go to fullscreen mode in my viewer and zoom in so that the extra margins are cropped, I can view the pages nicely, the annoyance however is that I have to reposition the pages every time I navigate to another page. I am sure there must be a way to make a PDF viewer that can solve this problem and perhaps there is one you know of? I am aware of something called PDF Reflow in Acrobat Reader but that only works with certain specific (tagged) files. I want a PDF viewer with a smarter zoom/next page function or an automatic margin-crop function. Is there such a thing?

  Read the article

• Mapped commands in VIM starting with a Comma

  - by Boldewyn

  In my .vimrc, I defined this line: map ,ps <Esc>:!ps<Space>-a<CR> The mapping is set (which I controlled via :verbose map ,ps while inside vim). There is nothing else mapped to the comma. However, if I type the command in command mode, nothing is displayed in the status bar, the comma is ignored, the p movement and the s insert are triggered. (I.e., VIM reacts, as if there was no command ,ps.) Is there any magic that I have overlooked in enabling comma-started mapped commands?

  Read the article

• IE session (-nomerge) management application?

  - by skrco

  I'm in need of an application that can manage multiple Internet Explorer instances (to be precise nomerge sessions) like you can in Remote Desktop Manager with RDPs. This app should host them in single window and arrange IE instances e.g. in tabs or lists. OK, in Remote Desktop Manager you can create Web session, but in embedded mode you cannot set the nomerge option - all windows and tabs share the same session. I've been searching the web, but with no results. So I put this question whether anyone know of such application or any workaround. Or I have to write my own app?

  Read the article

• rc.local is not executed on bootup ubuntu

  - by Alexander

  Im on Ubuntu 10.04. I want to execute script on system boot. I added it to rc.local. If I execute rc.local manually it works fine. If I boot system in recovery mode(2nd string in boot menu) it also works fine. But if I boot normally it is not executed. However i added sleep 20 to my script and there is a pause at the end of boot process, but nothing more is executed. Thanks I think, it soesnt depend on contents of the script but anyway #!/bin/sh -e sleep 20 sudo service ssh start su -c 'service pgsql start' postgres sudo svnserve -d su -c 'hamachi start' root su -c 'hamachi login' root exit 0

  Read the article

• dhclient configures /etc/resolv.conf with invalid entry

  - by kubal5003

  I'm trying to figure out why running dhclient on my interface sets /etc/resolv conf to the ip number of my gateway(router). This entry is invalid and each and every time causes inability to resolve any address. I would like to: stop dhclient from overwriting the /etc/resolv.conf or make dhclient write there the valid dns ip from my router More on the environment: I'm using virtual Debian Wheezy as a client system on Windows Seven x64. It is run by Virtualbox with networking mode set to bridged (all packets from debian are injected to my network interface on windows). If I manually configure the /etc/resolv.conf then everything works fine. Doing this on every boot is quite annoying.. PS I know I can write a script to do it for me, but this is not the solution I want. //edit router ip: 192.168.1.100 /etc/resolv.conf AFTER running dhclient eth0: "nameserver 192.168.1.100" what I would like the /etc/resolv.conf to look like: "nameserver 89.202.xxxx" (I don't have to provide the real ip do I? )

  Read the article

• SQL Server 2000 + ASP.NET: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

  - by Rick

  I just migrated a development workstation FROM: Windows XP Pro SP3 with IIS 6 TO: Vista Enterprise 64bit with IIS 7 Since the move, one of my pages that accesses an SQL Server 2000 database is receiving the following error from my ASP.NET 2.0 web page: "Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'." I have: enabled Windows Authentication in IIS and web.config disabled Anonymous Authentication in IIS set up Impersonation to run as the authenticated user verified that the logged in user (in this case, me) has access to the appropriate database on the SQL Server verified that my login and impersonation information is correct in the ASP.NET page by checking User.Identity.Name and System.Security.Principal.WindowsIdentity.GetCurrent().Name (both display my username) My connection string using SqlConnection is "Server={SERVER_NAME};Database={DB_NAME};Integrated Security=SSPI;Trusted_Connection=True;" Why is it trying to login with NT AUTHORITY\ANONYMOUS LOGIN? I have to assume it's some setting or web.config entry specific to IIS7 since it worked fine before the migration. NOTE: The SQL Server is Windows authentication only - no mixed mode or SQL only.

  Read the article

• SolidWorks ratio issue with printing in landscape

  - by jamiemmp

  We run SolidWorks 2010 on XP. On one workstation when printing to the plotter in a 1:1 ratio in landscape mode it's off by small increments. He needs to adjust manually from 1:1 to 1:1.009 (for example) in order to correctly print 1:1. The increments by which it's off varies from drawing to drawing. None of the other workstations have this issue. All five of the workstations have the same settings and all print to one networked plotter. Three out of five have the same graphics card. Scale to fit is not checked. I read this site often, but this is the first time I've posted. I'm hoping someone here has run across this before. Thanks.

  Read the article

• CURL on PHP 5.2 works in CLI but not in IIS

  - by Ben Reisner

  I have a Windows 2003 Server running IIS with php 5.2.8, I'm trying to use CURL, and it works in CLI mode (if i execute php.exe) but it does not seem to be registered when running under IIS. The output of PHP info in both CLI and IIS show the same 'Loaded Configuration File', but under IIS it does not give the CURL info box. c:\program files\php\php.exe -i shows ... Loaded Configuration File => C:\Program Files\PHP\php.ini ... curl cURL support => enabled cURL Information => libcurl/7.16.0 OpenSSL/0.9.8i zlib/1.2.3 phpinfo() ... Loaded Configuration File => C:\Program Files\PHP\php.ini ... NOTE: This server also runs php 5.3 in c:\program files\php-5.3.0 and CURL does properly work with that installation.

  Read the article

• VPN and Bonjour conflicting

  - by JW.

  Does anyone know why a VPN connection might interfere with Apple's Bonjour? I've noticed that my Mac and various iDevices have trouble finding each other on my local network, when I have VPN connections open. Things like Home Sharing and Wi-Fi Sync work some of the time, but sometimes fail to find the other device. The VPN connections are made using IPSecuritas, which is a GUI around raccoon. I have the local "endpoint mode" set to Host. Apple mentions that Home Sharing may conflict with VPNs, but they don't specify why, or how to fix it. I'm using a Mac with OS 10.7.3 and IPSecuritas to connect to the VPN, an iPhone, and an iPad.

  Read the article

• 802.11 Capture Frame

  - by ALi

  I am using wireshark in monitor mode to capture all the frame. I buffered all the QosData in order to calculate the biterate of each station on the network. I calculate the biterate but it is not an accurate value. what i need to know is when the station use the network alone and when it uses it with another station? i know if two station with different wifi card for exemple ( st1 802.11g 54 Mb/s, st2 802.11n 300 Mb/s) if st1 uses alone the line the biterate used is 28 MB/s and if st2 uses alone the network the bit rate increase to approximately 150Mb/s but if the two station use the network at the same time the st1 lost about 80% of its bit rate because of the st1 wifi card thx in advance

  Read the article

• TIME column in TOP command for mysql

  - by michael

  When I run top on my database server I get that mysqld has been running for 4:00.51 and it continues to go up. I assume this means that one process with mysql has been running this long from other posts on here. Its not set to cumulative mode as best I can tell as the heading looks like it would change to CTIME if that be the case. What I'm wondering is if this is normal for a site that makes a lot of individual connections using PHP. I shouldn't have any long running processes that would hold on to a mysql connection for this long, only seconds at most. Am I incorrect to assume that this time relates to one connection/process running? I think usually I see it flash up and away on the TOP, not just stay there with this number increasing.

  Read the article

• Carbonite Restore Error after Windows Update

  - by Rev

  I recently installed Windows 8 on my main machine, and I'm have an issue with Carbonite. I can't restore any files from my previous OS, only files that where backed up from the current OS. I can download them from the web service, but I can't restore them with the client. The error says "You don't have the necessary security permissions to restore this file." (The file on top was backed up from the new install, while the one on bottom was from the old install.) I'm also having another issue, where Carbonite doesn't think it's running in admin mode. I think it's probably related to this error. When I right click to restore a file, I can't choose a location to restore to. I contacted Carbonite, and they said it's a known issue that apparently happens when upgrade from XP to 7, but they wouldn't help me since I'm running a beta OS. Hopefully one of you fine folks will have an idea.

  Read the article

• Asp.net error messages when on server are not displayed

  - by asn187

  I have been tasked with setting up asp.net websites on a windows server 2008 which are all in debug mode When browsing a website on the server and an error occurs, for example the database connection cannot be open I would expect as per normal to receive the Asp.net Server error page with an error dump Something like - http://www.codeproject.com/KB/books/1861005040/image091.gif However, what actually happens is I get random characters on the web page. For example: <?)=????*??2o????v??YK?WuZ,?6[N??f?O??b??@!???u]S??yQ?iN?&e???E???j??1z??x??????o?y????U??M???2d?i?4 This is not the correct or expected behaviour. The event log does however show what has gone wrong. How do I get the Server Error page to render properly, am I missing something in the servers asp.net setup?

  Read the article

• Redhat cluster Vs Pacemaker Vs Gluster Vs Sheepdog

  - by chandank

  Changing the entire question as earlier one was very confusing. I have been exploring different clustering system to run Virtual machines on two different machines on LAN with high availability. Currently I am already using DRBD resource on two different machines on Primary/Secondary mode. In case the primary fails I manually promote the secondary to Primary and start the VM. I also explored Gluster and looks good, however, I would rather prefer clustering over Gluster (user space FS). So if anyone has idea which one would be better from ease of use prospective please I would be interested in. Moreover, sheepdog project appears good, however, could not find much documentations/Howtos. I am using Centos 6.

  Read the article

• idle proccesses and high memory bad? uwsgi/django

  - by JimJimThe3rd

  I have a VPS with 256MB of ram. I'm running nginx, uwsgi and postgresql on Ubuntu 12.04 for a soon to be Django site. About 200MB of ram are being used despite the website not being active, the uwsgi processes seem to just be idling. Is this bad? I once heard that having a bunch of free memory isn't necessarily a good metric because it is possible that the memory in use can easily be freed up. I mean, it is possible that the server is storing commonly used "stuff" in case it is accessed but is more than happy to dump it if the ram is needed. But I'm really not sure, hence me asking this question. If it is bad I could set some of the application loading options for uwsgi like "cheap" or "idle" mode. Screenshot of my htop

  Read the article

• 1000 HZ linux kernel necessary if I have tickless and high resolution timer?

  - by Bob

  I am trying to improve performance on my server. I have a few processes that need low jitter (less than 10ms variance). I have a load average of 4 maximum on an i7-920 (4 physical cores, 8 with HT). There are about 10 processes ranging from 40% to 90% of a core user mode. System usage is 3% total. Total CPU usage is 80% max. Will setting the kernel from 100hz to 1000hz improve the jitter if tickless and high resolution timers are already set? This page seems to indicate it still does something. https://lkml.org/lkml/2009/4/28/401 How about changing from voluntary (PREEMPT_VOLUNTARY) to preemptible (PREEMPT)?

  Read the article

• Getting Correct Edition of Office 2007 from Serial Key

  - by Lloyd Sparkes

  I have been asked by a Client to refresh one of their Machines. To do this i managed to get Windows XP Setup to run in Repair mode, and while in setup i ran a serial key grabber, which grabbed the key for Office 2007 The only thing is that the key grabber didnt tell me what edition of Office 2007 was installed. I have aqquired a number of ISO's for the different editions (Home & Student, Standard, Professional, Ultimate) but the key doesnt work in any of them. Is there a way to get the edition from the Serial Key, or is there a generic ISO that will install any edition depending on the Serial Key?

  Read the article

• WinXP keyboard input repeat rate problem

  - by Victor Sorokin

  I have problem similar to http://superuser.com/questions/33981/problems-with-kvm-switch-and-keyboard-repeat-rate-on-windows-xp: When I press and hold some key it's repeated random number of times, after that repeat stops and I need to release key and press it again to make repeat continue. If there's simultaneous sound playback and repeat is stopped, sound's stuck while I hold key with unpleasant drumming as if there's some audio problem. This issue is reproducible in WinXP Safe Mode. On the same config under Linux there's no issue. My config: List item PS/2 Logitech Keyboard USB Mouse MB M3A/H-HDMI WinXP Pro English SP2 with added Russian layout (WinXP loads via GRUB2) Realtek audio drivers for AC97 Thanks for your suggestions J

  Read the article

• How to use Ralink RT2501/RT2573 as wifi access point in Debian Linux

  - by user60813

  Hi, I have a fit-PC server with Debian GNU/Linux (Lenny). I would like to use it as a wifi access point since my Linksys WRT54GS has become unstable. I have a USB Ralink wifi NIC. When I insert the card to USB I can see this with lsusb: Bus 001 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter I have tried following various HOWTOs on using wifi card as AP in Linux, however, it seems that the card cannot go into monitor mode. I believe this is because I must use a newer driver or upload non-free firmware or something like that. I have tried installed wicd, but it does not help. I bought this wifi adapter because I was told that it is one of the most common used Linux supported wifi cards that can be used as access point and a lot of other stuff. So my question is: How do I set up this USB wifi card as wireless access point in Debian Lenny?

  Read the article

• how to fix asyncmac.sys infection

  - by Jay

  AVG anti-virus tells me that there is a virus in my asyncmac.sys. I tried to overwrite it with a copy of asyncmac.sys from another computer (making sure that it was the same version of Windows XP, but I was still nervous that I was going to break something), but when I reboot, I get the same virus warning. If I try to delete the file Windows (or somebody) automatically and immediately puts it back. I get a blue-screen death if I try to boot in safe mode. I tried to do a system restore to before I had the virus, but it tells me that it can't restore because nothing has changed. Any suggestions on how to fix this?

  Read the article

• fast opening and closing connection with a specific port

  - by michale

  We have a Main application named "Trevor" installed in 2008R2 machine named "TEAMER12" which is slow now. One more application named "TVS" also running in and found there were many connections per second occurring to port 5009. netstat tool mentions that some fast connection open/close seen for port 5009 So first it will be listening mode like shown below TCP 0.0.0.0:5009 TEAMER12:0 LISTENING then establishes connection like TCP 127.0.0.1:5009 TEAMER12:49519 ESTABLISHED TCP 127.0.0.1:5009 TEAMER12:60903 ESTABLISHED After that iwill become TIME_WAIT and i could see several entries like shown below TCP 127.0.0.1:49156 TEAMER12:5009 TIME_WAIT after that it will establish connection like TCP 127.0.0.1:60903 TEAMER12:5009 ESTABLISHED TCP 127.0.0.1:64181 TEAMER12:microsoft-ds ESTABLISHED again it will go several entries like TIME_WAIT TCP 127.0.0.1:49156 TEAMER12:5009 TIME_WAIT Finally it will establish like this TCP 172.26.127.40:139 TEAMER12:0 LISTENING TCP 172.26.127.42:139 TEAMER12:0 LISTENING TCP 172.26.127.42:5009 TEAMER12:64445 ESTABLISHED TCP 172.26.127.42:64445 TEAMER12:5009 ESTABLISHED Can any body tell me whats the reason behind why many connections per second occurring to port 5009 and why application slow?

  Read the article

< Previous Page | 288 289 290 291 292 293 294 295 296 297 298 299  | Next Page >