Search Results

Search found 9088 results on 364 pages for 'after power failure'.

Page 293/364 | < Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >

• Managing disk in a VM

  - by dst

  I'm replacing my two old rack servers with a new one that has plenty of power to take over the functionality my current servers. The server is a 4U rack mount with 16 3.5" SAS drive bays, two 2.5" bays, a Xeon E3-1230v2 CPU and 32GB of ECC RAM. My issue is the following. I would like to have a FreeBSD file server with ZFS managing disks. However, I need other VMs for e.g. a shell/git server, mail server etc. I'm wondering how to deal with the following issues: I want ZFS to fully manage the disks, so I'm not using any hardware RAID. Should I pass the SAS controller directly to the FreeBSD system as passthrough PCI? I want to maximize the reliability of the setup. On what disks should I install the hypervsor and keep server system disks? For (2) I have the option of having a RAID setup on the SAS controller and using that as system disk to store the hypervisor as well as VM images. However, this makes PCI passthrough to the file server impossible. Another option is using the two 2.5" bays. In terms of reliability how are SSDs compared to e.g. WD RE4 disks? Would it make sense to have two SSDs in software RAID as boot disks for the hypervisor or should I just go with e.g. WD RE4 disks in a software RAID setup. I also need to think about where to store the mails for the mail server, but this could be done over NFS between the VMs. BTW, this is for home use, so the load is not really that big. What I'm looking for is best practices for splitting up a server.

  Read the article

• CentOS vps is randomly rebooting

  - by develroot

  I have a centos vps (Parallels Virtuozzo container) which has been running for months. However, a few days ago it started to randomly reboot itself, and i can't find out why. And the biggest problem that i don't understand is that it takes 40 minutes to reboot (as far as i can see in the logs) root ~ # cat /var/log/messages | grep shutdown Oct 11 13:52:11 vps27 shutdown[23968]: shutting down for system halt Oct 14 14:55:17 vps27 shutdown[30662]: shutting down for system halt Oct 15 06:21:23 vps27 shutdown[20157]: shutting down for system halt And notice the time difference between shutdown and xinetd's start: Oct 15 06:21:23 vps27 shutdown[20157]: shutting down for system halt Oct 15 06:21:24 vps27 init: Switching to runlevel: 0 Oct 15 06:21:27 vps27 saslauthd[30614]: server_exit : master exited: 30614 Oct 15 06:21:38 vps27 named[30661]: shutting down Oct 15 06:21:47 vps27 exiting on signal 15 Oct 15 07:04:34 vps27 syslogd 1.4.1: restart. Oct 15 07:05:06 vps27 xinetd[1471]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in. Oct 15 07:05:06 vps27 xinetd[1471]: Started working: 0 available services And here's what Parallels Power Panel says in terms of Status Changes: Time Old Status Status Obtained Oct 15, 2011 06:23:46 AM Mounted Down Oct 15, 2011 06:22:31 AM Running Mounted Oct 14, 2011 03:06:48 PM Starting Running Oct 14, 2011 03:06:23 PM Down Starting Oct 14, 2011 03:06:08 PM Mounted Down Oct 14, 2011 02:58:24 PM Running Mounted For some reason it's getting into Mounting mode and then restarts itself. The only problem that i can imagine is disk space utilization, which is now 84%. But can that be a reson for system halt? Time Category Details Type Parameter Oct 15, 2011 07:08:33 AM Resource Resource counter_disk_share_used yellow alert on environment vps27 current value: 82 soft limit: 85 hard limit: 95 Yellow zone counter_disk_share_used Oct 15, 2011 06:27:23 AM Resource Resource counter_disk_share_used yellow alert on environment vps27 current value: 82 soft limit: 85 hard limit: 95 Yellow zone counter_disk_share_used Oct 15, 2011 06:23:50 AM Resource Resource counter_disk_share_used green alert on environment vps27 current value: 0 soft limit: hard limit: 0 Green zone counter_disk_share_used Oct 14, 2011 03:06:24 PM Resource Resource counter_disk_share_used yellow alert on environment vps27 current value: 83 soft limit: 85 hard limit: 95 Yellow zone counter_disk_share_used Oct 14, 2011 03:05:50 PM Resource Resource counter_disk_share_used green alert on environment vps27 current value: 0 soft limit: hard limit: 0 Green zone counter_disk_share_used

  Read the article

• OC'ing a Sapphire 7950, problems with memory clock

  - by Cliff

  I bought a new rig with sapphire radeon 7950 flex w/ boost. Good scores initially in 3dmark 11, around 7300 stock. Problem is, as soon as i start overclocking, issues arise. the core clock is at 860, but rises to 925 with boost applied in pressured situations. So all the OC tools are showing 925 as base clock for some reason. Ocing the core clock has been no problem though, got up to 1200 pretty stable, but only an incremental increase in 3dmark 11, to 7600 from 7300, which is worrying. The real trouble starts when i start touching the memory clock. As soon as i touch it even by 1 point up to 1251mhz, the performance goes way down. suddenly i score under 5000 graphics in 3dmark11, no matter if its 1251hz or 1500hz. Ive tried adjusting every other parameter, different tools (sapphiretrixx, catalyst, afterburner) all still the same. Tried upping the power, still same. Where is the issue here?

  Read the article

• Server freezes while installing Redhat Enterprise Linux Server 6

  - by eisaacson

  We've tried both the first options Install or upgrade an existing system Install system with basic video driver When trying option #1, it gets to a screen that has a solid cursor about halfway down, then freezes. When trying option #2, it freezes at the point where it says: Waiting for hardware to initialize... Of course, we bought the unsupported version and haven't found anything to help us so far. Here are the specs to the server in the original post: ASUS P8Z68-M Pro LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard with UEFI BIOS RAIDMAX Reiter ATX-305WBP Black Steel / Plastic ATX Mid Tower Computer Case 450W Power Supply Intel Core i7-2600 Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 2000 BX80623I72600 16GB Ram OCZ Agility 3 SSD 120GB From some of the posts out there could the UEFI Bios or the Sandy Bridge processor be a culprit here? We just tried the DVD on a different computer and it got past that point with ease. It's a standard Dell build compared to our custom machine. Could it be having difficulty recognizing drivers? How do we get past that?

  Read the article

• Troubleshooting: Monitor never turns on, system fans running, DVD-ROM does not open.

  - by Wesley

  Hi all, Here are my specs beforehand: ECS P4VXASD2+ (V5.0) motherboard FSB 533MHz Intel Pentium 4 2.40A GHz Prescott Socket 478 2x 256MB PC2100 DDR RAM, 2x 256MB PC133 SDRAM CoolMax 350W PSU DVD-ROM - will edit with brand & model 128MB ATi Radeon 9800 Pro AGP No hard drive So, I just put those parts together today and I tried to power it up, with the monitor connected to the Radeon 9800 in the AGP slot (mobo does not have VGA port). After turning it on, the CPU fan, graphics fan and system fan go on. However, the monitor remains in standby mode, despite being plugged in. Also, after pushing the button on the DVD-ROM drive, it does not open. I've used the DVD-ROM drive before with absolutely no issues. The graphics card was slightly buggy when I put it on another machine, which was left outside in winter weather for 3 months. (Still that computer's integrated graphics worked fine.) CMOS battery was replaced and jumpers are all set correctly. Now, I'm wondering whether the motherboard, CPU, PSU or GPU is the problem. What can I do to test which part is the problem? Just to clarify, I don't have a hard drive, so I usually boot Ubuntu from the disc drive. Anyways, thanks in advance!

  Read the article

• Cheap desktop computer in 19" rack-mountable form-factor?

  - by Alex Basson

  I'm a high school teacher at a small private school. As of this year, we have SMARTBoards in every classroom (though I've had one in the class I share for two years now). The classrooms themselves don't have computers in them, so we teachers bring our laptops to class and connect them to the boards. This has several disadvantages: This takes a few minutes while we wait for the board to boot up and then orient the board to our individual laptop -- we have to do this every time b/c different teachers have different laptops requiring different orientations. This isn't ideal because when you only have 43 minutes per class period, waiting five minutes just to get started is a real waste. Carrying your laptop to class doesn't sound so bad until you consider that we're also carrying textbooks and piles of student papers, and we're carrying it all through crowded high school hallways. More than one laptop has fallen THUNK to the floor, with dire consequences. We feel we could eliminate the need to use our laptops with the SMARTBoards if we had a dedicated computer in each classroom hooked up to the board at all times. Each board set-up is connected to a podium with a standard 19" rack in it, currently housing a power supply and DVD player. There're plenty of rack spaces available. So I'm thinking: maybe we could get some inexpensive computers in a 19" rack-mountable form factor, install them in the podiums, and connect them to the boards on a permanent basis. Any suggestions?

  Read the article

• Splitting build cross the network?

  - by Dandikas

  Is there a known solution for splitting build process cross the network machines? Use case: We are an average software development company. We own around 50 development workstations (Quad Core 2.66Ghz, 4 GB ram, 200 GB raid). No need to tell that at any single moment not every machine is loaded to the max. There are 5 to 15 projects running simultaneously at any single moment. Obviously all of them are continuously build on server, than deployed to proper environment. Single project build is taking from 3 to 15 minutes. The problem: Whenever we build 5 projects in a row the last project is going to be ready after around 25 - 50 minutes. Building in parallel does not solve the problem (build is only a part of the game, than you need to deploy, run tests etc.) YES the correct solution is to add another build server, but "That involves buying new Expensive hardware, and we already spent a lot!". Yea, right(damn them)! Anyway. What about splitting build among developers workstation? Lets say whenever we need to build project "A" we check 5 workstations and start build on all that are not overloaded. The build can be canceled by a developer if he really needs all the power of his machine as long as there is at least 1 machine that is still building. After build is finished deployment can be performed to a proper environment (hosted on some server, not on workstation :) ). The bigger the company the more this makes sense to me. Anyone tried something like this? Are there any good practices? Any helpful software?

  Read the article

• Data Store/Volume disconnecting. How to resume copy of VMDK?

  - by Serge

  I'm having an issue with my ESXi 4.1 hosts losing the datastore with FC SAN after a power outage. All 3 hosts disconnect so it's definitely a SAN issue. I've tried to resolve the issue on the SAN side with the SAN software support and Adaptec hardware support. No luck there. So I'm stuck with a SAN that will randomly disconnect the volume. I need to get the virtual machines (VMDK files) from the datastore. The problem is I can only get 5-20% before the data store disconnects. I have backups that are slightly older that I can use to replicate the VMDK differences to. What has not worked so far: Powering up the VMs, will boot up for 5-15 minutes then freeze vCenter migrate or clone of VM, will fail after similar period of time vCenter copy/paste of VMDK. Was able to get one 30GB VMDK and no luck after that. vMware Data Recovery. Fails at low %, can't resume, so next backup starts from begining. Veeam Backup & Recovery. Same as above, no resume function. If I can just find a backup solution that will resume from the failed spot that would solve my issue. Anyone have any ideas that I could try? EDIT 1 The SAN is Open-E DSS 6 running on a Supermicro 24 drive enclosure with 4 port Qlogic FC. Adaptec 52445 RAID card.

  Read the article

• Getting Dell E6320 with I7 to work with 3 monitors at 1920x1080p x 3

  - by MadBoy

  I want to buy Dell E6320 which comes with Intel Core I7-2620M (2.70GHz, 4MB cache, Dual Core) with Intel HD Graphics 3000. Laptop will come with docking station. I want to connect 3 monitors to that docking station so that working at home would give me some additional boost. Docking station will allow me to connect only 2 monitors so I'm looking at following other options: Matrox TRIPLEHEAD2GO DIGITAL Edition or TRIPLEHEAD2GO DP Edition. But reading Matrox Support Page intel GPU can't run the highest resolution with 3 monitors connected, it even gets worse since it seems monitors would have to be able to work at 50hz. Also I'm not sure but it seems that Matrox doesn't split the monitors as 3 separate monitors but simply as one big space (which is a bit opposite to what I need) Buy 2 or maybe just 1 USB based monitor but it would also mean having 1 or 2 different monitors then the main one, unless I buy 3 USB based monitors which would mean more money to spend. Also I found only couple of models and most of them require USB 3.0 and no other cables to plug in (nice but costly - couldn't find decent monitor with only USB for sending signal and having power connected normally) . But docking station has only one USB 3.0 port. Can I use hub and still get it to work? Find some converters from Digital to USB (I think DisplayLink does some?) Buy different laptop but what kind? I need it to be I7, small (13"), fast and lightweight. At same time it requires docking station that I can use at home to connect 3 external monitors. Some other suggested solution... Edit: I need 3 monitors for work in terms of coding in Visual Studio or having word/excel/outlook open. Nothing fancy. Maybe some movie once in a while.

  Read the article

• ACDSee alternatives for batch editing images

  - by Oxwivi

  I am looking for free, preferably open, alternatives to ACDSee for batch editing work. While I can do much of the work well on ACDSee, it's not entirely satisfactory despite having to pay for it. I need at least the following batch editing functions: Resize using either height or width and maintain aspect ration Auto contrast text overlays and occasionally, cropping oh, I make extensive use of renaming features as well Couple of issues with ACDSee are: I always need to highlight the Exposure section or auto contrast will not be done despite it being saved in the preset; and I can't define, move around the cropping box, forcing me to manually crop tons of images. I'm not an advanced, or "power photo-editor". I only require the basic stuff I described to be automated. My personal feature wish list (I'm pretty sure something so niche doesn't exist) would be text overlay based on the image names (images are named as image-1_1, image-1_2 or image-2_c1_1, image-2_c1_2, and text overlay would Image-1 and Image-2 C1 and Image-2 C2). I tried digiKam, but damn that thing is huge. It runs very slowly on my Pentium 4 and 1.5 GB RAM. On top of being a program with over 1 GB of files, the KDE library it uses is always slow regardless of it running on either Windows or Linux.

  Read the article

• Why does Outlook 2007 lose connection to Exchange when Windows 7 64-bit turns off display?

  - by Greg R.

  The problem: When Windows 7 puts the display to sleep, Outlook 2007 and also Microsoft Office Communicator 2005 lose the connection to the Exchange server. When I unlock the computer, Outlook is logged out of Exchange and prompts me for credentials (although usually I have to restart Outlook to get it to reconnect). The network connection is still active, e.g. other applications don't lose their connection to the network or Internet when Windows 7 puts the display to sleep. I'm using a Dell E5400 notebook running Windows 7 Enterprise 64-bit with Outlook 2007 connecting to a corporate Exchange server (not sure if it's Exchange 2007 or 2010). The Dell is typically docked and connected via DVI (through the dock) to two Dell monitors. The Power Options in Windows 7 are set as follows: Turn Off The Display: 15 minutes Put The Computer To Sleep: never Those are the "Plugged In" settings but the problematic behavior is the same when running on battery. When Windows 7 turns off the display, it automatically locks the computer. E.g., I have to re-enter my credentials to access the machine. This is per corporate policy. The equivalent set up on my previous Dell notebook running Windows XP SP3 did not result in this problem with Outlook 2007 or Office Communicator 2005 connecting the very same exchange server. The problem began when I switched to the new Dell E5400 with Windows 7.

  Read the article

• Is VGA port hot-pluggable?

  - by Martin Bøgelund

  In meetings, I often see people detaching the VGA connector from one running laptop and connecting it to another, while the projector is still on. Is this 100% risk free, and OK by design of the VGA standard? If there's a risk involved in hot-plugging VGA, can it be removed by turning off or suspending either laptop, display, or both? I see this being done all the time without causing disaster, so clearly I'm not interested in answers stating "we do it all the time, so it should be OK!". I want to know if there's a risk - real or in theory - that something breaks when doing this. EDIT: I did an internet search on the topic, and I never found a clear statement as to why it is safe or unsafe to hot swap VGA devices. The typical form is a forum question asking basically the same question as I did, and the following types of statements Yes it's hot swappable! I do it all the time! It involves some kind of risk, so don't do it! You're some kind of moron if you think there's a risk, so just do it! But no explanation as to why it safe or not... Joe Taylors answer below contains a link to a forum post and answers that basically give me the same statements as mentioned above. But again, no good explanation why. So I looked for an actual manual for a projector, and found "Lenovo C500 Projector User’s Guide". It states on page 3-1: Connecting devices Computers and video devices can be connected to the projector at the same time. Check the user’s manual of the connecting device to confirm that it has the appropriate output connector. [image] Attention: As a safety precaution, disconnect all power to the projector and devices before making connections. But again, no good explanation.

  Read the article

• Using NFS for scalable PHP/MySQL web application

  - by Jeroen Moons

  Here's the situation: I have a PHP/MySQL web application that accepts user uploads (pdf files). From these pdf files' pages a preview image is made on the fly and presented to the web app's users. Some pdfs might be on the large side, most will be under 50 MB but some extreme cases could be as large as a few hundred MB. A little waiting for the preview image for large pdf files is acceptable but no more than a minute let's say. Everything is running on one server for now, but soon the app will hit the server's limit on both storage and processing power. My idea to solve the problem: To deal with this situation I had the idea of having one or more pdf processing servers as needed, and one or more file storage servers. These two types of servers are mounted to the server on which the actual app runs using NFS. The app could then use GearMan to delegate pdf processing tasks to these processing servers. The processing server can mount the storage server and read the file stored there, process it and write its output to that server. The servers I'm talking about will be amazon ec2 instances. The web app returns a link to the resulting pdf preview image on the storage server that was used which can then be used on the front end to show the image to the user. My question: I have zero experience with apps that use multiple servers, is this idea viable or is there a better way to do it? Is an NFS setup fast and reliable enough for this situation?

  Read the article

• Can't get past bootcamp Windows logo, freezes immediately after picking boot partition -- Windows 7

  - by cksubs

  Hi, I had a fine install of Windows 7 alongside Snow Leopard. I had a power outage, and Windows restarted. When I booted via the "Hold Option" sceen, it started hanging at the grayscale "Windows logo" (squares) that comes up after picking the Windows drive from the bootcamp loader (the Windows version of the grayscale Apple logo when OS X loads). I think this happened once before, and installing rEFIt helped. I did that, but it continued to hang at the same point. I finally got fed up with it and erased the Windows partition via Disk Utility. I then reinstalled Windows 7 x64 from DVD to the fresh partition. Seemed fine. Ran Windows Update then restarted. FFFFFFFFF. Hangs in the same place. What can I do? Like I said, I already have rEFIt installed. Booting the Windows 7 install CD results in the same infinite loading error. I don't have a spare Snow Leopard disk handy.

  Read the article

• Wake on LAN Problem

  - by Caley Woods

  I'm working to get wake on lan (wol) working so that we can do some power management at my workplace. I've enabled WOL on a test laptop running Win 7 x64 and put it to sleep and hibernate both with no luck. I'm using a 3rd party utility and I've ran wireshark on the test laptop with it booted up and I can see the WOL packets coming in and the machine refuses to wake from sleep or hibernate. I thought maybe it was the computer I was using so I had another Win 7 x64 laptop nearby and I tried it, same scenario. We're in a cisco environment and I believe I gotten all the pieces in place since I'm seeing the WOL packets come through. I've tested two machines on the same subnet to eliminate the possibility of a misconfiguration on the switch, this also has the same behavior. The laptop models are a Compaq 6510b and 6730b. Is there something I'm missing? I'm trying this across UDP port 50200 since that's the port the actual management system will use after I get it working.

  Read the article

• Server 2003 PDC DNS not working..Failover server is...

  - by Seth

  In the midst of trying to utilize proc power, i create a fault tolerant DNS server a while ago. Since, Ive been trying to add another controller for exchange. So I thought I would revert back to a single primary DNS for the meantime and now Im balancing on a thread. The server i thought I uninstalled DNS, is still acting as DNS. And now the PDC does not resolve. Can anybody walk me through, Im overwhelmed and cant think straight... Im afraid if anyone restarts their machine they wont have internet. Update Ok so from the beginning. I was configuring Exchange on a new server 2008. How it happened I dont know, but it started to not resolve DNS. (exclamation mark on NIC) even though everything was static. So ultimately I decided to remove the server from the problem, because I noticed DNS was in disarray if I used the DNS IP of the first server. This is when I tested with nslookup on each DNS server. I had uninstalled DNS from the second server, but nslookup was still resolving with that IPaddress, which has me all wound up cause I dont understand. So, since the first DNS server isn't resolving, Im assuming if the second one isnt configured right I'll loose internet. Im just confused and dont know where to start troubleshooting...

  Read the article

• Is Unix a PC Operating system?

  - by Corelgott

  I have got kind of a stupid question. I am doing my bachelor at a university. In a wirtten assigment a prof posted the task: "Name 3 PC-Operating Systems:" Well, I went on an included a variety of OS (Linux, Windows, Osx) including Unix & Solaris. Today I recieved a mail from my prof saying: "Unix is not a PC-Operating System. Many Unix-Variants are not PC-Hardware-Compatible (like AIX & HP-UX. About Solaris: there was one PC-Compatible version...)" I am kind of suprised: Even if may Unix-Variants are Power-PC and different bit-order – Those don't stop beeing PCs right now? The question was given in a written assigment! It was not a question that came up during lecture! Due to the original postest task being in German, I'll include it just to make sure, that nobody suspects an error in the translation... "Nennen Sie 3 PC-Betriebssysteme:" Response / Antwort: "Unix ist kein PC-Betriebssystem, viele Unix-Varianten sind nicht auf PC-Hardware lauffähig (AIX, HP-UX). Von Solaris gab es mal eine PC-Variante." Anybody got something on that? Thx & Cheers Corelgott

  Read the article

• Dell Dimension 8400 Startup error

  - by Michael

  Hello all, thanks first for taking the time to read this and possibly help me...... now I am pretty decent of a computer tech...but not enough. I am having an issue with my computer which is running windows xp and as I mentioned it is a dell Dimension 8400. as soon as I power the system up the fan goes into hyper drive (spins like crazy and is very loud) then the start up screen with dell comes up and the loading bar gets stuck on the process of "Bios Revision A00" and never loads beyound that. I have read alot about it and think that the main problem was that it can not locate the file (which does have an updated version) I think it is A09. I can not enter safe mode, Bios mode or anything. I do have the file on my other computer and I was wondering if there is a way that I can use a usb flash drive (as I have read on other sites) to create a bootable MS-Dos diskette but I am failing at creating as such....is this possible? or is there anything else I can do? I tried to remove the battery from the system for about 10 minutes while it was completely unplug and tried then to reboot it and go into the bios menu but the same thing keeps happening....can anyone help me :-(

  Read the article

• How important is dual-gigabit lan for a super user's home NAS?

  - by Andrew

  Long story short: I'm building my own home server based on Ubuntu with 4 drives in RAID 10. Its primary purpose will be NAS and backup. Would I be making a terrible mistake by building a NAS Server with a single Gigabit NIC? Long story long: I know the absolute max I can get out of a single Gigabit port is 125MB/s, and I want this NAS to be able to handle up to 6 computers accessing files simultaneously, with up to two of them streaming video. With Ubuntu NIC-bonding and the performance of RAID 10, I can theoretically double my throughput and achieve 250MB/s (ok, not really, but it would be faster). The drives have an average read throughput of 83.87MB/s according to Tom's Hardware. The unit itself will be based on the Chenbro ES34069-BK-180 case. With my current hardware choices, it'll have this motherboard with a Core i3 CPU and 8GB of RAM. Overkill, I know, but this server will be doing other things as well (like transcoding video). Unfortunately, the only Mini-ITX boards I can find with dual-gigabit and 6 SATA ports are Intel Atom-based, and I need more processing power than an Atom has to offer. I would love to find a board with 6 SATA ports and two Gigabit LAN ports that supports a Core i3 CPU. So far, my search has come up empty. Thus, my dilemma. Should I hold out for such a board, go with an Atom-based solution, or stick with my current single-gigabit configuration? I know there are consumer NAS units with just one gigabit interface (probably most of them), but I think I will demand a lot more from my server than the average home user. Any advice is appreciated. Thanks.

  Read the article

• What is the difference between these Pentium Extreme Edition CPUs?

  - by Giffyguy

  The CPU in question is the Pentium Extreme Edition 955. Intel's website shows four "versions", but for the most part they all look identical. They even share the same set of ordering codes. But one of them has a substantially lower TDP, which is seemingly unexplainable - since everything else is the same. Two of them say "LGA775, Tray" and I have no idea what "Tray" means either. Also, two of them have a different SPEC code. What I need to know is: What does "LGA775, Tray" mean? Why does the one CPU have a lower TDP? And what does that mean for me? Does that mean lower maximum power consumption? Does it mean the CPU may be more stable/endurant, because of a lower heat output? Why do two of them have a different SPEC code, and what does this mean? Finally, what does PLGA775 (as opposed to LGA775) mean, and do I need to be worried about that? Information from Intel's wbsite: Intel® Pentium® Processor Extreme Edition 955 (4M Cache, 3.46 GHz, 1066 MHz FSB) with SPEC Code 1 Boxed Intel® Pentium® Processor Extreme Edition 955 4M Cache, 3.46 GHz, 1066 MHz FSB LGA775 PLGA775 B1 95 Watts BX80553955 SL94N 2 Intel® Pentium® Processor Extreme Edition 955 4M Cache, 3.46 GHz, 1066 MHz FSB LGA775, Tray PLGA775 B1 130 Watts HH80553PH0994M SL94N 3 Boxed Intel® Pentium® Processor Extreme Edition 955 4M Cache, 3.46 GHz, 1066 MHz FSB LGA775 PLGA775 B1 130 Watts BX80553955 SL8WM 4 Intel® Pentium® Processor Extreme Edition 955 4M Cache, 3.46 GHz, 1066 MHz FSB LGA775, Tray PLGA775 B1 130 Watts HH80553PH0994M SL8WM

  Read the article

• Can I make my PC backup and then sleep on demand with WHS?

  - by Simon

  I really hate the way that WHS backs up at a particular time in the morning. First of all I don't EVER want my computer turning on when I am not there. EVER. I have a Core-i7 laptop which literally could burn the house down quite easily if it were to turn on in a bag. I also don't ever want my PC to sleep unless I tell it to. I don't have hibernation or sleep enabled and this is the only way that WHS will sleep after a backup is complete. I know that Windows 7 has the ability to disable waking up when on battery power but it doesn't seem to work on my laptop. These are the possibilities (with wake timers left as default): 'Wake this computer for backup' ON - it turns on in my bag if i forget to turn it off - and stays on when the backup is complete. 'Wake this computer for backup' OFF - it backs up in the morning, but I need to leave the machine on all night. I say 'Backup Now' and then it backs up immediately. I can turn it off when its done if I'm still awake, but then that backup appears as 'locked' in the console and not 'automatically managed'. What I'd really like to do is : Click 'Backup and Sleep' and then go to bed. It will backup immediately and then sleep the PC. This backup must be 'automatically managed' and not appear as a 'locked backup' in my console Show me a confirmation that everything was backed up successfully (or not) when I turn it on. Is there any way to achieve this?

  Read the article

• Give access to specific services on Windows 7 Professional machines?

  - by Chad Cook

  We have some machines running Windows 7 Professional at our office. The typical user needs to have access to stop and start a service for a local program they run. These machines have a local web server and database installed and we need to restrict access to certain folders and services related to the web server and database for these users. The setup I have tried so far is to add the typical user as a Power User. I have been able to successfully restrict them from accessing certain folders (as far as I can tell) but now they do not have access to the service needed for starting and stopping the local program. My thought was to give them access to the specific service but I have not had any luck yet. In searching the web for solutions the only results I have found relate to Windows Server 2000 and 2003 and involve creating security templates and databases through the Microsoft Management Console. I am hesitant to try an approach like this as these articles are typically older and I worry this method is outdated. Is there a better way to accomplish the end goal of giving the user permission to run the service and restrict their access to certain folders? If any clarification is needed on the setup or what we are trying to achieve, please let me know. Thanks in advance.

  Read the article

• How can I update generic non-pnp monitor?

  - by njk

  Background I've been running a KVM switch with my monitor at 1920 x 1080 over VGA for over a year. Did a Windows Update on 12/11/12 which did the following: Update for Windows 7 for x64-based Systems (KB2779562) Security Update for Windows 7 for x64-based Systems (KB2779030) Cumulative Security Update for Internet Explorer 8 for Windows 7 for x64-based Systems (KB2761465) Windows Malicious Software Removal Tool x64 - December 2012 (KB890830) Security Update for Windows 7 for x64-based Systems (KB2753842) Security Update for Windows 7 for x64-based Systems (KB2758857) Security Update for Windows 7 for x64-based Systems (KB2770660) After a restart, my extended monitor was dark. I attempted to reset the extended display configuration, and noticed my monitor was being detected as a Generic Non-PnP Monitor: I uninstalled, downloaded new, and re-installed display drivers. Nothing. I attempted to unplug my monitor from the power for 15 minutes. Nothing. I followed some of the suggestions on this thread; specifically DanM's which suggested to create a new *.inf file and replace that in Device Manager. Device Manager said the "best driver software for your device is already installed". The only thing that works is when the monitor is directly attached to the laptop. This obviously is not what I want. My thought is to somehow remove the Generic Non-PnP Monitor from registry. How would I accomplish this and would this help? Any other suggestions? Relevant Hardware ASUS VE276 Monitor TRENDnet 2-Port USB KVM Switch (TK-207K) HP Laptop w/ ATI Radeon HD 4200 Screens

  Read the article

• Remote paging with Nagios when network is down and email won't work -- cellular modems and alternatives

  - by Quinten

  What is the best option for remote paging when network services are down? I'm looking for a solution that can let me know when network services are down during off-hours only, and especially when email/smtp services are out. Therefore, it needs to be redundant to our network and power supply. I'm imagining a cellular modem is one option. What's the price range for these? Is anybody using them and feel that they are worth the cost? I'm imagining that it's something we would end up sending an emergency page ~ 1x/month at most, so I'd like the pricing to reflect that--I don't mind a high per-page cost as long as it has a low recurring cost. Another option would be to expose at least one server to remote ping, and run a check script on a remote server. Are there paid options for this? Currently, we run Nagios on a Linux VM on a Windows 2008 Hyper-V host. It would be great if the solution would work in that environment, but I know it's tricky with external devices, and we could move Nagios to a standalone workstation if needed.

  Read the article

• w2k3 AD DC Demotion fails with "no other AD DC for that domain can be contacted"

  - by Kstro21

  i've a small office with a single w2k3 sp2 DC(bad idea, but it is real), now, i want to make a clean install of that pc, so, i got another one, install w2k3 sp2, add it to the domain, dcpromo and set it to be a GC, untill now everything is ok, then tried to dcpromo in the primary DC, but it fails with The box indicating that this domain controller is the last controller for the domain mydomain.com is unchecked. However, no other Active Directory domain controllers for that domain can be contacted. Do you wish to proceed anyway? If you click Yes, any Active Directory changes that have been made on this domain controller will be lost. So, i started to move all the roles to the new server as described here, when all was ok with the roles, i tried doing the same, but got the same result. Tried moving the DNS to the new server, but it doesn't make difference. Shutdown to the old server, then tried to log into a workstation, but it fails saying the domain is not available, also coudln't add new workstation to the domain, so i have to power on the old server again. So, if i successfully move all the roles and dns to the new server: why dcpromo give such message in the old server? why if i shutdown the old server the domain is not available?? if i successfully move all the roles and dns to the new server, and i click yes when dcpromo give warning in the old server, will i lose all users, computers, ou, etc.? am i missing some steps to make this work?? hope you can help me thanks

  Read the article

< Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >