Search Results

Search found 15160 results on 607 pages for 'boot disk'.

Page 293/607 | < Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >

• Installing raid controller forces reinstall of Windows Server 2008

  - by Tyler

  So, I've tried two different RAID controllers that have external SATA connections on my Server 2008 machine. I can install the hardware, boot into Windows, install the drivers and reboot again. No problems. However, as soon as I try to use eSATA-connected drives and reboot something happens to the Windows install and I can no longer boot into Windows. I tried repairing from the command line, and the end result is that repair console tells me I have 0 Windows installations (?). I end up having no choice but to reinstall Windows to get back on track. I must be doing something fundamentally wrong here, but I don't know what :(

  Read the article

• Rebuilding RAID1 in Ubuntu

  - by John Utech

  I had my second HD in my RAID1 come up with bad sectors. So I got another drive and pulled out the bad sector drive and put the new drive in. With the original working RAID1 drive in the computer it failed to boot. I manually copied everything from the old drive over via a Gparted Live CD. Still no booting. Kind of scratching my head here as I can see that both of the drives have data on them but are unable to get either of them to boot. I used a Ubuntu live CD and couldn't even manually mount either of the drives, which I thought was really the odd part. Not sure where to go from here.

  Read the article

• Best use of new express card on Windows

  - by jckdnk111

  I just bought a 48GB SSD express card for my laptop and I am trying to decide how best to use it. I will be running some sort of virtualization (prob VirtualBox) to test / learn Windows Server administration. I am running Windows 7 Ultimate 64 bit. I have 4GB of RAM and a 7200 RPM SATA hard disk. The express card will read at 115MB/s and write at 65MB/s. So how best to use this new disk? Readyboost, relocate pagefile, store VM disks, mix / match?

  Read the article

• Why doesn't Ghost 2003 offer to fill the destination drive?

  - by Neil

  Because it is dangerously low on disk space, I want to upgrade an SBS 2003 server by replacing its existing 72GB drive with a 364GB drive. When I tried to use Norton Ghost 2003 to clone the disk it didn't suggest that I use the entire new drive. I'm worried that I caused the process to fail by overriding its decision - although the cloned drive boots in Safe Mode, if I try booting it normally then none of the SQL Express instances start and something causes the server to reboot before even the Ctrl+Alt+Del screen appears. Does Ghost 2003 know something that I don't? Or should I be using some other software?

  Read the article

• Bootmgr is missing for windows xp

  - by user1167074

  I know that there are so many posts on this subject but none of them worked for me. I have Ubuntu on my machine and I would like to install windows xp. As my cd/dvd reader does not work, I made a bootable usb from iso image using UNETBOOTIN, but when I try to boot in through USB it says "BOOTMGR is Missing". I have searched a lot but could not find any solution to it. Please note that my hard disk uses ext4 format and my bootable drive uses NTFS. I have set the Boot Sequence as USB Drive in BIOS. Please let me know if you need any additional information to fix this. Thanks

  Read the article

• dhcp code for pxe server

  - by avoq

  I'm trying to understand every single line of the following script but to no avail. I'd be glad if someone could help me. For sure I know its purpose is to start the DHCP server as well as the TFTP...But I'm stuck: killall dnsmasq 2>/dev/null dnsmasq --enable-tftp --tftp-root=$PXEDATA/boot --dhcp-boot=pxelinux.0,"$IP",$IP --dhcp-range=$(echo $IP | cut -d. -f1-3).50,$(echo $IP | cut -d. -f1-3).250, infinite --dhcp-option=option:router,192.168.0.254 --log-dhcp Why killall, why dnsmasq 2 What does "2" stand for? "--" what does it mean? Thanks a lot.

  Read the article

• Super slow time machine backup on my mac

  - by lowellk

  I just got a new 2TB drive which I'm trying to use as a time machine drive for my mac which has a 1TB drive. On my first time trying to back it up, I'm getting terrible throughput, not even 1GB per day (it's been running for 36 hours now). I erased the disk and tried to copy a large file to it and got the same slow speed. What can I do to diagnose this? Are there any tools which can inspect the disk and tell me if it's messed up? Thanks!

  Read the article

• How do I install yum on Redhat Enterprise 4?

  - by Bob Cross

  For historical reasons, one of the machines that I manage has a Redhat Enterprise 4 boot disk (among others). Every now and then, we have to boot into RHEL4 to bring up some of the legacy software that we support and connect to. Since it's a fringe system, the Redhat support has long since lapsed and I can't convince myself that it would be worth paying just to get RPMs that I can go and get for myself. That said, the default RHEL tools are heavily biased against letting you do exactly that. I would like to install yum and use that as my package discovery and installation. So, is there an installation guide to integrating yum with an older RHEL 4 system?

  Read the article

• Installing Solaris 10 on sunT5220 - ZFS/UFS raid 10?

  - by Matthew

  I am in a bit of a time crunch, and need to get two T5220's built. We were very happy to see two boxes in our aged inventory which had 8 HDD's each, but didn't think to check if they were running hardware RAID or not. Turns out that they aren't. When we install, we are given the option to use UFS or ZFS, but when we select a place to install we're only given the option of installing on one single disk. Is it possible to create a software raid 10 across all of the disks and install the OS on that? Sorry if any lingo is wrong, I'm not really a Sun guy and our guru is out of town right now. Any help would be really appreciated! Note: Most of the guides I've found on google entail installing the OS on a single disk, and then creating a separate RAID 10 on other disks. We would actually like the OS to reside on the RAID 10. Hope that clarifies things.

  Read the article

• SSD runs faster on Windows as compared to Linux [closed]

  - by wushugene

  Windows 7 seems to install, boot and run much smoother & faster than each the three linux distros I have recently tried (Ubuntu 12.04 unity, Linux mint 13 MATE, and Fedora 17 on gnome 3.4). Why am I facing bad performance in Linux? I have tweaked my Linux installs for the SSD (enabling trim, disabling swap, etc.) I'm using an Acer TravelMate with i5-2410m processor, intel hd 3000 graphics, 8 gigs of ram, and a 256 gb samsung 830 ssd. Edit: Boot times are 10-15 seconds slower, there is noticeable delay from login to fully loaded desktop, and in general does not appear to be as responsive as my old windows 7 install or the Linux guests I had running on it.

  Read the article

• Mouse Hang with voltage fluctuation

  - by user265495

  I bought a new assembled PC about a month ago, but for the past 7 or 8 days I found my mouse cursor hangs every time there is a voltage fluctuation on my UPS (I guess it as when sound comes from ups then mouse hang for 2 or 3 sec. and them it goes normal again). My PC also seems to shut down while I'm working and it refuses to boot again - I end up needing to switch off my UPS and press and hold the power button for 30 seconds. It will then boot as per normal. Could the trouble be with my PSU? Am I potentially damaging my computer by pressing and holding the power button? I have : Motheboard : intel Chipset Model - DH61WWAAG23116-303 Processor : Intel Core i3 3.20 Ghz RAM : Zion 4 gb DDR3 HDD : 1 tb GRAPHICS : 2 gb NVIDIA GeForce GT-610 CABINET : Frontech Rock OS : Win 7 32 Bit

  Read the article

• how to clone a physical "individual partition" vmdk into a "local" (file-based) vmdk?

  - by BJH

  Hello. I have a physical disk with a small (60GB) partition containing my guest OS. The physical disk also contains a large (240GB) block of unpartitioned space. My vmdk is defined as a physical "individual partition". I want to convert the source physical "individual partition" vmdk into a local (file-based) vmdk. The command - vmware-vdiskmanager -r sourcevmdk targetvmdk -t 2 creates a 300GB vmdk that includes both the desired 60GB "individual partition" and the 240GB of useless unpartitioned space ! How can I create a local vmdk with just the individual partition?

  Read the article

• How do I disable startup dll and programs in vista?

  - by phoenixoflight

  Here is the situation. I can't get into Vista or boot into safe mode. I get blue screened either way during the loading process. I would like to try to disable as many dlls and programs from loading at boot as I can. What files in vista do I change to go about doing this? All the guides I've seen do it from within Vista. I have a BartPE bootable cd that I'm using to get into the file system. I just need to know which files to modify. Thanks much for reading

  Read the article

• How do I disable startup dll and programs in vista?

  - by phoenixoflight

  Here is the situation. I can't get into Vista or boot into safe mode. I get blue screened either way during the loading process. I would like to try to disable as many dlls and programs from loading at boot as I can. What files in vista do I change to go about doing this? All the guides I've seen do it from within Vista. I have a BartPE bootable cd that I'm using to get into the file system. I just need to know which files to modify. Thanks much for reading

  Read the article

• xl create doesn't bring up console

  - by ineff

  I've tryed to run VM in Xen 4.2 using xl command (for what I get this should be standard toolstack, while xm is deprecated). In this case I've the following configuration file kernel = '/media/home_separata/domU_kernel/boot/vmlinuz-linux' ramdisk = '/media/home_separata/domU_kernel/boot/initramfs-linux.img' name = "domU_Arch_linux" memory = "512" root = '/dev/xvda1 ro' disk = ['file:/media/home_separata/domU_kernel/arch_linux_kernel.img,xvda1,w'] vif = ['mac=aa:::10:11:f1,ip=192.168.0.2,bridge=xenbr0'] when I try to start the virtual machine with xl create it seems it works (it also bring up the vif interfaces) but if I try to connect via xl console it gives an error: xenconsole: Could not read tty from store: No such file or directory the fun fact is that the I've the problem inverse using xend/xm (in that case xend doesn't bring up vif interfaces but activate console). Does anyone have any suggestion?

  Read the article

• Using an Internal HDD as an External HDD also or an External HDD for installing SAP ?

  - by Asterix

  Is it possible and advisable to use an Internal Hard Drive as an External Hard drive also. I wanted to install SAP ECC 6 on my system which has only 250 GB but atleast 300 GB is required.I wanted to buy an External Drive first, then I heard loading SAP on an External would make it extremely slow. I'll be using it only as a beginer so even if it is a little slow i don't mind. Is it feasible to run such a big application from an External Hard disk ? So can i purchase a 500 or 1 TB Internal Hard disk and use it as an External too by fitting it with the necessary USB 3.0 Hard drive cases and cables ? or should i purchase a External and load SAP onto it ? Thank you.

  Read the article

• Mac OS X Lion (10.7.3) Virtual Machine?

  - by Ben Hooper

  I have been looking into this for a while and have attempted quite a few "solutions" (hackintosh boot images, universal unlockers, etc) before I gave in and asked for help. I know this is extremely difficult to accomplish, especially with an AMD CPU, but it has been done and it can't hurt to ask. Question Does anyone know of any way to actually get Mac OS X Lion (10.7.3) to boot in VMware Workstation 8.0.2? I know that Mac OS X is heavily dependant on hardware configuration, so I will post my PC's hardware below, if it helps. As far as I know it's only reliant on the CPU, but I will post it all just in case. PC Hardware Motherboard: ASUS M4A77T CPU: AMD Phenom II x4 955 Black Edition Graphics Card: Palit Sonic Platinum nVIDIA Geforce GTX 460 Memory: G-Skill [RipjawsX F3-12800CL9D-8GBXL] 8GB PSU: Arctic Power 700(W) Hard Drive: SAMSUNG HD204UI 2TB Thanks in advance. :)

  Read the article

• Is it safe to compress my Windows 7 %USERPROFILE%\AppData folder?

  - by Kev

  Having just read Scott Hanselman's latest blog entry, Guide to Freeing up Disk Space under Windows 7, he suggests turning on NTFS compression which I already do for a number of less travelled folders that contain static files such as downloads or images. However I am wondering if it's wise to turn on NTFS compression for the whole of my %USERPROFILE%\AppData folder? My system drive is a 128 GB SSD residing in a Dell Precision T5400 3Ghz Quad Core Xeon workstation so I ought not to notice the extra cycles used to compress and decompress files on their way to and from the disk. However would there be any good reasons not to do this? In fact could I safely compress the whole of my %USERPROFILE% folder?

  Read the article

• USB HD Freezes Windows Explorer

  - by nfplee

  I recently purchased a "Seagate STBX1000200 1TB Expansion 2.5 inch External Hard Drive". It has been working without problems until recently. When i plug the device into a USB port the device is recognised as it appears in the device manager but when i go to Windows Explorer and try to open it (or right click on it) it hangs/freezes windows explorer. Please note i am using Windows 7 Professional. I have already tried various things without success after searching for people with similar problems. I did read that it could be a problem with how the computer assigns a drive letter. But whrn i go to disk management (when running as an administrator) it hangs and displays the following message: Connecting to virtual disk service I'd appreciate it if anyone could offer some advice. Thanks

  Read the article

• How do I know when my on-board ethernet is dead? (Realtek 8112L LAN controller w/ AI NET2 )

  - by Usagi

  So I have an ASUS P7P55D-E Pro motherboard. It has an on-board Realtek 8112L LAN controller w/ AI NET2. I suspect that my LAN controller is dead but I don't really know for sure. This is what I know thus far: Everything was working, I have a triple booted system and ethernet was functional under Linux, Win7, and OSX. My ethernet is no longer functional under all three of the operating systems. I was experiencing random momentary internet outages before everything finally went dark. I don't know much about the AI NET BIOS tool but I believe it just checks for ethernet problems before you boot into an operating system. In any case, it doesn't find a connection upon boot. I've checked the connection on a couple of other machines and everything worked fine. I think I already know the answer to my question, but are there any other possible explanations, or is it dead?

  Read the article

• Ubuntu 9.10 freezes when HDMI port is connected

  - by Felipe Hummel

  I have a Sony Vaio FW350 with a HDMI output. I'm trying to use it under Ubuntu 9.10 with a LG LCD monitor 21,5'. The laptop has a Intel 4500 video card. I've tried two approaches: Boot the laptop with the HDMI cable connected and monitor turned on. Result: LCD Monitor keeps turned on but the whole screen is black and Ubuntu do not seem to be initializing. Boot Ubuntu until the end. I then connect the HDMI cable into the Laptop. The mouse and the whole system freezes. In both cases the only way to turn off the laptop is holding the power button. I've looked around the internet for similar problems, but only found workarounds for the same problem with VGA input, not HDMI. I also tried to use metacity before connecting the cable, but still got the same result. Any hints?

  Read the article

• How can I tell if my live web-server is overloaded?

  - by Nick G

  We have a live webserver which doesn't seem to be performing all that well. It's a Dell PowerEdge machine, a few years old (dual core, 4GB) which is hosting about 20 low-traffic websites. However it doesn't seem to be as fast as it used to be. How can we determine the cause of this? If it's website traffic, I would be expecting high CPU but CPU usage is quite low and hovers around the 15-30% mark except for very brief periods. I'm wondering perhaps, if rather than CPU performance being a problem, perhaps it's disk thrashing due to the constant read/writes of all the small web files and database queries. It has 4x 7200 RPM SATA drives in RAID 5. So is there a way to check that it's not disk thrashing?

  Read the article

• copy WinXP Home recovery files to new SSD

  - by maGz

  My wife's Samsung netbook, which has Windows XP Home Edition OEM and a 5400 SATA 2 HDD, has finally crawled to (almost) a halt, and I've decided to install an OCZ SSD into it. The problem is that the machine came with no recovery media, but the recovery partition exists and I can boot into it. How can I go about creating a bootable DVD from that partition, and then boot off that to install on the SSD? NOTE: My aim after this is to upgrade to Windows 7 Home Premium, as the upgrade option is a lot cheaper than purchasing a retail or DSP equivalent.

  Read the article

• repair/recovery tool for Western Digital Elements (1TB)

  - by Pennf0lio

  My Hard Disk Drive just got corrupted due to electricity fluctuation. When I plug my Western Digital Elements, It ask me if I want to format it or not... I can't see my files or even the capacity of my disk from it's properties. Is there any solution you would suggest? looking for a software that can give me access to my files. I just need to copy it then I can retire my Drive and will buy a new one... Thanks!

  Read the article

• Change MacOS X guest screen resolution for VirtualBox

  - by Pymoo

  I have tried all alternatives and resources that I found on internet to achieve to change screen resolution in my MacOS X guest. I have the latest VirtualBox version (4.1.22) and I have MacOS X 10.6.3 Snow Leopard running in a vm guest. Some solutions that don't work for me are: Tuning virtual machine settings: Adding and in the .vbox file, or running these two commands: vboxmanage setextradata "MAC OS X" "CustomVideoMode1" "1360x768x32" vboxmanage setextradata "MAC OS X" "GUI/CustomVideoMode1" "1360x768x32" Editing Guest OS boot configuration: Modify /Library/Preferences/SystemConfiguration/com.apple.boot.plist with these lines: <key>Kernel Flags</key> <string>"Graphics Mode"="1360x768x32"</string> <key>Graphics Mode</key> <string>1360x768x32</string> Any other suggestion, something that I was missing. Thanks in advance,

  Read the article

< Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >