Search Results

Search found 20016 results on 801 pages for 'download manager'.

Page 298/801 | < Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >

• Apple Service Diagnostic application on USB key?

  - by Matt 'Trouble' Esse

  I found the following in a text file, and I would like to use the Apple Service Diagnostic Application from a bootable USB key but I cannot find where to download it or set it up? Also is this free software or does it require a separate licence? It sounds like it would be a useful tool for diagnosing Mac problems. The Apple Service Diagnostic application is designed to run both EFI and Mac OS X tests from an external USB hard drive. Apple Service Diagnostic (EFI) runs low-level tests of the hardware directly and does not require Mac OS X, while Apple Service Diagnostic (OS) uses Mac OS X to run tests. Booting and Using the Apple Service Diagnostic Application - Before using Apple Service Diagnostic, disconnect any Ethernet network, USB, and audio cables. - With the USB hard drive containing ASD 3S123 plugged into a USB port, restart the computer and hold down the option key as the computer boots up into the Startup Manager. To run ASD (EFI) select the "ASD EFI 3S123" drive icon and press return or select it with a mouse click. To run ASD (OS) select the "ASD OS 3S123" drive icon and press return or select it with a mouse click. ASD (EFI) will load in 20-30 seconds; ASD (OS) will load in 2-3 minutes. - After running ASD (OS) or ASD (EFI), press the Restart button to restart the computer back into the normal startup volume, or hold down the option key to get back to the Startup Manager. ASD is no longer delivered as an image to be restored onto a DVD. ASD 3S117 and newer versions requires installation onto an external USB hard drive. For more information, please refer to the document "Installing ASD on a USB hard drive".

  Read the article

• Booting VM Directly from iSCSI (or FC) in Hyper-V R2

  - by tony roth

  I have a server that san boots that I want to p2v. I have many options disk2vhd, scvmm etc but I was thinking about cloning the lun (flexclone, netapp) presenting it to my hyper-v r2 server. Within the hv manager do a create new disk then have it copy the cloned lun to a vhd file. Then do the bcdedit\bootsect stuff to it. Should work right? I'm also curious if anybodys booting vhd's that are on bootable luns? I've booted native vhd's just fine was just curious about the running them off a bootable lun. I think that this has quite a few advantages like instant p2v etc.. any thoughts on this? hmm dang as I was typing this I realized that I should not use the hv manager new disk copy routine, I should just disk2vhd the mounted lun. This has advantages in that it should be a lot faster!! discovered that disk2vhd may be flaky, crashed the first time I ran it! thanks

  Read the article

• Configuring WPA WiFi in Ubuntu 10.10

  - by sma

  I am trying to configure my wireless network on my laptop running Ubuntu 10.10 and am having a bit of difficulty. I am a complete Linux newb, but want to learn it, hence the reason I'm trying to set this up. Here's the vitals: It is a Gateway 600 YG2 laptop. It was previously running Windows XP, but I installed Ubuntu 10.10 in place of it (not a dual boot, I removed XP altogether). I have an old wireless card that I'm trying to resurrect. I haven't really used the card in a couple years, but it seems to still work, I just can't connect to my home's wireless network. The card is a Linksys WPC11 v2.5. When I plug it in, Ubuntu recognizes the network, but won't connect to it. My home network uses WPA encryption and the only connection type that Ubuntu's network manager is giving me is WEP and then it asks for a key -- I have no idea what that key should be. So, basically, I'm asking, is there a way I can instead connect through WPA? I've tried creating a new connection in network manager, but that won't work, it keeps falling back to the WEP connection and asking me for a key. I have tried to install the XP driver using ndiswrapper but I don't know if that's working or not. Is there a way to tell if: A) the card is working as it should B) the correct drivers are installed (again, I installed the XP one using ndiswrapper NET8180.INF, but I'm not sure what to do next) Any help would be appreciated. Thank you.

  Read the article

• Windows 7 Not Recognizing Camera Nor iPhone as Camera

  - by taudep

  I've been struggling with this one for a few days. I've recently upgraded an older computer to Windows 7 Home Premium. Neither my digital camera (A Canon SD1200IS) nor iPhone are ever detected as cameras, nor ever show up as accessable in Explorer. With the Canon camera, no driver is required. It's supposed to work with the default Windows 7 drivers. However, in the Control Panel's Device Manager, I'm always seeing a yellow icon next to the "Canon Digital Camera" device. I've uninstalled the device and let Windows attempt to reinstall, but it can never find a driver to install. With the iPhone, it's very similar. One big difference, though, is that iTunes can see the iPhone and back it up, etc. However, again when I go to the Device Manager, there's a yellow icon next to the iPhone. I've uninstalled iTunes, reinstalled, rebooted, deleted drivers, and let Window try to reinstall the driver, but it can never find the driver. So there seems to be some correlation that my machine can't detect cameras properly, and that it might be even a lower-level type of driver I'm struggling with. I know that USB however, does work, because I have have an external drive hooked into the machine. I've gone through the web and tried two hours worth of fixes, without success. I feel like if I can get the Canon camera detected, then the iPhone will be on it's way to being fixed too. BTW, I couldn't really find anything of use in the Event viewer. Any and all suggestions welcome.

  Read the article

• Troubleshooting iptables and configuring it to drop the priority of long-term connections

  - by intuited

  I'm somewhat familiar with the general concepts of iptables, and would like to learn it in more detail. I'm hoping that my learning experience can also be useful. The situation: I'm running dd-wrt on my router. Despite its purported QoS skills, I'm still seeing connection latency shoot up hugely whenever there's an ongoing http connection, eg some large download. Under such conditions, it can take 10 seconds or more to load a basic webpage; sometimes the connections are dropped entirely. I've tried adjusting the parameters, dropping the allotted bandwidth for up and download to well under my limit, but nothing seems to work. dd-wrt is configured to use HTB as the QoS algorithm; HFSC, although presented as an option, seems to cause the router to crash, and is rumoured to not actually work on any linux system. I'd like to be able to troubleshoot this issue and hopefully improve the settings that dd-wrt is using, but I'm finding the learning curve a bit overwhelming. For starters I am not sure what HTB actually specifies: is this a set of iptables commands, or do some of those commands specify how HTB is to be used? I would like it to prioritize based on protocol the way that it already supposed to, and in addition I'd like to have it drop the priority of connections which have a high total byte count, say over 400KB. Also tips on utilities that can be run under dd-wrt to get more info on what's going on in there are appreciated. I've tried to get iftop to work but there were issues running curses. I'm leaning towards replacing dd-wrt with openwrt; comments on this strategy are also welcome. I suspect that I would be well advised to get a second router as a standin before trying that. It may be worth noting that my total bandwidth is pretty limited (256Kbit/s).

  Read the article

• Disabling Skype automatic update

  - by user13267

  How to stop skype from searching or at least downloading update without consent? I want that annoying "Update skype now" dialog box that keeps popping up before I log in to Skype and after I log in to Skype from appearing at all. Few months ago this used to work: 1) C:\Users\”YourName”\AppData\Local\Temp folder. 2) Find the file called SkypeSetup.exe, and delete it. 3) Create a text file in the folder, rename it to SkypeSetup.exe 4) Right click on the new file you just created and ask for properties. 5) Next left click the security tab then left click the advanced button. 6) Now left click “Change Permissions” and then “Add”. Enter “Everyone” (without the quotes) where it sez’, “Enter the object name to select (examples):” and click “OK”. 7) Now check the “Deny” box for “Full control” and click “OK”. obtained from HERE, but now it seems this has stopped working. The worst part is Skype seems to download ~30MB of executable setup file without my knowledge before bugging me with the dialog box to update it, and there seems to be no direct way to disable this download. And disabling the skype updater service does not seem to work either. Is there any kind of patch or registry hack I can use to stop skype from auto updating? Or should I start looking for an alternative to Skype altogether?

  Read the article

• SQL Server Management Studio not scripting all objects

  - by Ian Boyd

  i've been attempting to script a database using SQL Server 2005 Management Studio. i cannot get it to script some objects. It scripts others, but skips some. i can provide detailed screen shots the options being selected including all tables the folder where the script files will go the folder being empty before scripting the scripting process saying Sucess when scripting a table the destination folder no longer empty, with a hundred or so script files the script of some tables not being in the folder. And earlier SSMS would not script some views. Is this a known thing that the the Generate Scripts task does not generate scripts? Update Known issue on Microsoft Connect, but Microsoft couldn't repro the steps, so they closed closed the ticket. Fails on SQL Server 2005, also fails on SQL Server 2008. Update Two Some basic questions: 1.What version of SQL Server? Microsoft SQL Server 2000 - 8.00.194 (Intel X86) Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Microsoft SQL Server 2008 - 10.0.2531.0 (Intel X86) Microsoft SQL Server 2005 Management Studio: 9.00.4035.00 Microsoft SQL Server 2008 Management Studio: 10.0.1600.22 2.What O/S are you running on? Windows Server 2000 Windows Server 2003 Windows Server 2008 3.How are you logging in to SQL server? sa/password Trusted authentication 4.Have you verified your account has full access to all objects? Yes, i have access to all objects. 5.Can you use the objects that fail to script? (eg: select top(10) * from nonScriptingTable) Yes, all objects work fine. SQL Server Enterprise Manager can script the objects fine. Update Three They fail no matter what version of SQL Server you script against. It wasn't a problem in Enterprise Manager: Client Tools SQL Server 2000 SQL Server 2005 SQL Server 2008 ============ =============== =============== =============== 2000 Yes n/a n/a 2005 No No No 2008 No No No Update Four No errors found in the database using: DBCC CHECKDB go DBCC CHECKCONSTRAINTS go DBCC CHECKFILEGROUP go DBCC CHECKIDENT go DBCC CHECKCATALOG go EXECUTE sp_msforeachtable 'DBCC CHECKTABLE (''?'')' Honk if you hate SSMS.

  Read the article

• Limit bandwith on network of computers

  - by Joseph34123

  We have network in office of approximately 10 computers sometimes when someone downloads something for work (e.g. syncing email with an attachment or Dropbox), everyone slows down. I could limit each computer in office but the problem is that we have an open WiFi network, and I cannot access the computers that use it. We have one main DSL router "Netopia 3347" and another router connected to it on wire for public wifi is "Linksys WRT110". I cannot change the setup we have and don't want to. There's 2 approaches here: Set office computers download limit in each computer and then I need to find out how I can set a download limit for the wifi network such as in the router settings. It's a Linksys router and I did not see the option for this, so maybe I need new router for WiFi? Don't bother with each computer and put some "specific hardware" or another computer before router so all traffic goes trough it and I can then assign priority maximum speed for each IP address. Question is what hardware do I need?

  Read the article

• Hardening non-root standalone Linux Tomcat install

  - by NoozNooz42

  I want to know if you have any tips as to how to strengthen the security of a non-root install of Tomcat in standalone mode once Tomcat is already installed in a non-root account, in standalone mode. I precise this because, for example, I'm not at all interested by the answers given here (because both Java and Tomcat requires root priviledges there to be installed and I've got zero interest in running jsvc): http://serverfault.com/questions/43765 So far, here's what I've done for my non-root standalone Tomcat 6 install: download and install the JRE .bin provided by Oracle/Sun (no need to be root here) (no need for a full JDK anymore right seen that Jasper [Tomcat's JSP engine] has its own compiler now right?) download and tar -xzf tomcat 6 (no need to be root here) set up transparent port-forwarding (must be root here) Note that my distribution is a Debian one and I have exactly zero interest in downloading Debian package / backports / whatever... Because, once again, I DO NOT want to need to be root to install Java & Tomcat. The only moment I needed to be root was to configure the firewall to transparently do the port forwarding 80 <-- 8080 and 443 <-- 8443. I then deleted all the default webapps but one: cd ~/apache-tomcat-6.0.26/webapps rm -rf docs rm -rf examples/ rm -rf manager/ rm -rf ROOT/ What about the directory ~/apache-tomcat-6.0.26/webapps/host-manager, do I need it or can I delete it? So, once I've installed Tomcat standalone in a non-root account (and taken into account that I don't want to enter the root password anymore and that I don't plan to install the whole Apache shebang), what more can I do? Are there connectors I can disable? (how?)

  Read the article

• Server Directory Not Accessible

  - by GusDeCooL

  I got strange things happen on live server, but normal in local server. My local server is using mac, and my live server is linux. Consider i try to access some files http://redddor.babonmultimedia.com/assets/images/map-1.jpg This work correctly. http://redddor.babonmultimedia.com/assets/modules/evogallery/check.php Return 404, I'm pretty sure my file is in there and there is no typo mistake. How come it give me 404? There is only one .htaccess on the root server and it's configuration is like this. # For full documentation and other suggested options, please see # http://svn.modxcms.com/docs/display/MODx096/Friendly+URL+Solutions # including for unexpected logouts in multi-server/cloud environments # and especially for the first three commented out rules #php_flag register_globals Off #AddDefaultCharset utf-8 #php_value date.timezone Europe/Moscow Options +FollowSymlinks RewriteEngine On RewriteBase / <IfModule mod_security.c> SecFilterEngine Off </IfModule> # Fix Apache internal dummy connections from breaking [(site_url)] cache RewriteCond %{HTTP_USER_AGENT} ^.*internal\ dummy\ connection.*$ [NC] RewriteRule .* - [F,L] # Rewrite domain.com -> www.domain.com -- used with SEO Strict URLs plugin #RewriteCond %{HTTP_HOST} . #RewriteCond %{HTTP_HOST} !^www\.example\.com [NC] #RewriteRule (.*) http://www.example.com/$1 [R=301,L] # Exclude /assets and /manager directories and images from rewrite rules RewriteRule ^(manager|assets)/*$ - [L] RewriteRule \.(jpg|jpeg|png|gif|ico)$ - [L] # For Friendly URLs RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php?q=$1 [L,QSA] # Reduce server overhead by enabling output compression if supported. #php_flag zlib.output_compression On #php_value zlib.output_compression_level 5

  Read the article

• Easiest way to send encrypted email?

  - by johnnyb10

  To comply with Massachusetts's new personal information protection law, my company needs to (among other things) ensure that anytime personal information is sent via email, it's encrypted. What is the easiest way to do this? Basically, I'm looking for something that will require the least amount of effort on the part of the recipient. If at all possible, I really want to avoid them having to download a program or go through any steps to generate a key pair, etc. So command-line GPG-type stuff is not an option. We use Exchange Server and Outlook 2007 as our email system. Is there a program that we can use to easily encrypt an email and then fax or call the recipient with a key? (Or maybe our email can include a link to our website containing our public key, that the recipient can download to decrypt the mail?) We won't have to send many of these encrypted emails, but the people who will be sending them will not be particularly technical, so I want it to be as easy as possible. Any recs for good programs would be great. Thanks.

  Read the article

• trying to allow domain admins access in apache

  - by sharif

  I am trying to authenticate domain admins through apache and it is not working. Error i get is as follows [Mon Sep 24 14:54:45 2012] [debug] src/mod_auth_kerb.c(1432): [client 172.16.0.85] kerb_authenticate_user entered with user (NULL) and auth_type Kerberos [Mon Sep 24 14:54:45 2012] [debug] src/mod_auth_kerb.c(915): [client 172.16.0.85] Using HTTP/[email protected] as server principal for password verification [Mon Sep 24 14:54:45 2012] [debug] src/mod_auth_kerb.c(655): [client 172.16.0.85] Trying to get TGT for user [email protected] [Mon Sep 24 14:54:45 2012] [debug] src/mod_auth_kerb.c(569): [client 172.16.0.85] Trying to verify authenticity of KDC using principal HTTP/[email protected] [Mon Sep 24 14:54:45 2012] [debug] src/mod_auth_kerb.c(994): [client 172.16.0.85] kerb_authenticate_user_krb5pwd ret=0 [email protected] authtype=Basic [Mon Sep 24 14:54:45 2012] [debug] mod_authnz_ldap.c(561): [client 172.16.0.85] ldap authorize: Creating LDAP req structure [Mon Sep 24 14:54:45 2012] [debug] mod_authnz_ldap.c(573): [client 172.16.0.85] auth_ldap authorise: User DN not found, LDAP: ldap_simple_bind_s() failed Below is what I have in my httpd file Alias /compass "/data/intranet/html/compass" <Directory "/data/intranet/html/compass"> AuthType Kerberos AuthName KerberosLogin KrbServiceName HTTP/intranet.xxx.com KrbMethodNegotiate On KrbMethodK5Passwd On KrbAuthRealms xxx.COM Krb5KeyTab /etc/httpd/conf/intranet.keytab # require valid-user # Options Indexes MultiViews FollowSymLinks # AllowOverride All # Order allow,deny # Allow from all # SetOutputFilter DEFLATE # taken from http://blogs.freebsdish.org/tmclaugh/2010/07/15/mod_auth_kerb-ad-and-ldap-authorization/ # download extra module and install # Strip the kerberos realm from the principle. # MapUsernameRule (.*)@(.*) "$1" AuthLDAPURL "ldap://echo.uk.xxx.com akhutan.usa.xxx.com/dc=xxx,dc=com?sAMAccountName" AuthLDAPBindDN cn=Administrator,ou=Users,dc=xxx,dc=com AuthLDAPBindPassword *** Require ldap-group cn=Domain Admins,ou=Users,dc=xxx,dc=com </Directory> I have followed this guide. I have download and install the tarball. when I try to uncomment MapUsernameRule i get failed error when restarting apache Reloading httpd: not reloading due to configuration syntax error I am using centos 5 64bit. I have added the following line but i still get syntax error LoadModule mod_map_user modules/mod_map_user.so

  Read the article

• Unable to get squid working for remote users

  - by Sean

  I am trying to setup squid 3.2.4, but I have not been able to get it working for remote users. Works fine locally. Unable to figure out what I am doing wrong... http_port 3128 transparent ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=4MB cert=/usr/share/ssl-cert/myCA.pem refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 acl localnet src 10.0.0.0/8 # RFC 1918 possible internal network acl localnet src 172.16.0.0/12 # RFC 1918 possible internal network acl localnet src 192.168.0.0/16 # RFC 1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT http_access allow manager localhost http_access deny manager http_access deny !Safe_ports http_access allow localhost http_access allow localnet http_access allow all cache deny all via off forwarded_for off header_access From deny all header_access Server deny all header_access WWW-Authenticate deny all header_access Link deny all header_access Cache-Control deny all header_access Proxy-Connection deny all header_access X-Cache deny all header_access X-Cache-Lookup deny all header_access Via deny all header_access Forwarded-For deny all header_access X-Forwarded-For deny all header_access Pragma deny all header_access Keep-Alive deny all acl ip1 localip 1.1.1.90 acl ip2 localip 1.1.1.91 acl ip3 localip 1.1.1.92 acl ip4 localip 1.1.1.93 acl ip5 localip 1.1.1.94 tcp_outgoing_address 1.1.1.90 ip1 tcp_outgoing_address 1.1.1.91 ip2 tcp_outgoing_address 1.1.1.92 ip3 tcp_outgoing_address 1.1.1.93 ip4 tcp_outgoing_address 1.1.1.94 ip5 tcp_outgoing_address 1.1.1.90

  Read the article

• Networking problems in VMWare with wireless bridge

  - by Robert Koritnik

  Barebone data: virtualization: VMWare Workstation 6.5 (latest) Host: Windows Server 2008 x64 Guest: Windows Server 2008 x86 Host network adapter: Ethernet (see comment) Host network adapter: Wireless (see comment) Guest ethernet network adapter 1: Bridged VMNet (automatic) Guest ethernet network adapter 2: Host only VMNet comment: my host has LAN and Wifi but only one at the same time. I'm either wired or wireless. Never both. So bridged connection on VM goes either via wire or air. Problem When I'm wirelessly connected on the host and I access internet within VM my connection just gets stalled (not dropped). It doesn't experience any timeout whatsoever, it just stops downloading/communicating. For instance: I start downloading a file with a browser (IE/FF/CR doesn't matter) and I have to pause/restart download when speed drops to 0. I could wait indefinitely but connection won't pick-up automatically. What did I miss in my network configuration? Update 1 I've tested this in various combinations. This works fine when host is connected via Ethernet. But when host is connected via Wifi, the connection on the guest works as previously described. It connects fine. It gets a valid IP from DHCP... Everything is cool as long as you don't start doing some intensive network traffic (ie. download a 2MB file) In this case it starts downloading and stops after a while. Speed just drops to 0B/s... Sometimes it picks up back, sometimes it doesn't. Connection still stays and works. I can ping around with no problem.

  Read the article

• How do I export address book from N97

  - by mplungjan

  Hi, I need to copy my numbers from my private Nokia to my office BB. I have not found a way to export my phone numbers from ovi or elsewhere. On Mac iSync stopped working with snow leopard and OVI on windows does not export. I do not mind using a windows suggestion. I lost a description on how to use the ovi backup files in another program. What I have done so far terminal: sudo open -a iSync.app - it launched but iSync said "this device is not supported by iSync" went here http://europe.nokia.com/support/product-support/isync/compatibility-and-download found a plugin (I am sure that was not there a while ago :| ) Checked software version 22.0.110 installed plugin Ran iSync which found and installed my N97 device successfully. synced. It stopped with The connection was lost while talking to the phone. http://discussions.europe.nokia.com/t5/Nseries-and-S60-Smartphones/N97-iSync-Multimedia-Transfer-Modem/m-p/568560 no news since Jan 2010. Tried to download and install http://best-vcard.en.softonic.com/symbian but the installer fails :( I simply do not understand why Nokia is giving us such a hard time. I would not have considered switching from Nokia if Mac had been better supported. It is so frustrating that they just seem not to care losing Nokia fanbois like me - especially since I am this outspoken on the net and what i say on popular forums gets indexed by google fast. I am very close to just go iPhone here. Hope someone has Nokia's ears UPDATE: I Downloaded NbuExplorer from sourceforge. It will extract everything from an OVI backup into VCF, VCS and VMG files. Very useful software and free.

  Read the article

• Computer causing WiFi interference?

  - by Mannimarco

  I came back from college and brought my desktop computer. Family recently switched to Verizon FIOS and got a new router because of it. Unfortunately, my connection to the new wifi network is awful, with the download speeds (tested through speedtest.net) fluctuating wildly and often dropping below 1.5 Mbps. A laptop in the same room gets 20 Mbps. I've tried a new wireless card, thinking that mine got damaged in the move home but no luck. Here's where it gets weird: if I place the laptop near the computer, the laptop's download speeds often suffer greatly. Pulling the laptop away always fixes this. So now I'm under the impression that there's something in the computer (which I built a year ago and has had 0 issues up to this point) is causing an insane amount of wireless interference. Also bizarre: the upload speeds seem unaffected by this problem. On the laptop and desktop, upload speeds are generally around 5 Mpbs. Any ideas as to what could be causing this and how to test said theories would be fantastic.

  Read the article

• Compiling Gearman PHP Library for CentOS 5.8

  - by Andrew Ellis

  I've been trying to get Gearman compiled on CentOS 5.8 all afternoon. Unfortunately I am restricted to this version of CentOS by my CTO and how he has our entire network configured. I think it's simply because we don't have enough resources to upgrade our network... But anyways, the problem at hand. I have searched through Server Fault, Stack Overflow, Google, and am unable to locate a working solution. What I have below is stuff I have pieced together from my searching. Searches have told said to install the following via yum: yum -y install --enablerepo=remi boost141-devel libgearman-devel e2fsprogs-devel e2fsprogs gcc44 gcc-c++ To get the Boost headers working correctly I did this: cp -f /usr/lib/boost141/* /usr/lib/ cp -f /usr/lib64/boost141/* /usr/lib64/ rm -f /usr/include/boost ln -s /usr/include/boost141/boost /usr/include/boost With all of the dependancies installed and paths setup I then download and compile gearmand-1.1.2 just fine. wget -O /tmp/gearmand-1.1.2.tar.gz https://launchpad.net/gearmand/1.2/1.1.2/+download/gearmand-1.1.2.tar.gz cd /tmp && tar zxvf gearmand-1.1.2.tar.gz ./configure && make -j8 && make install That works correctly. So now I need to install the Gearman library for PHP. I have attempted through PECL and downloading the source directly, both result in the same error: checking whether to enable gearman support... yes, shared not found configure: error: Please install libgearman What I don't understand is I installed the libgearman-devel package which also installed the core libgearman. The installation installs libgearman-devel-0.14-3.el5.x86_64, libgearman-devel-0.14-3.el5.i386, libgearman-0.14-3.el5.x86_64, and libgearman-0.14-3.el5.i386. Is it possible the package version is lower than what is required? I'm still poking around with this, but figured I'd throw this up to see if anyone has a solution while I continue to research a fix. Thanks!

  Read the article

• Should one have a separate user account for work use? [closed]

  - by Tyler Wayne

  This question examines the practice of using a separate OS-level user account to divide work use from personal use (specifically, in a creative profession and on a personal computer). I recently left my in-the-flesh job to go to school, but I'm carrying on with the work remotely. I do all of my work on my laptop, and I currently have a separate user account called "Work" where I do exactly that. However, I'm now starting to question that practice. Because my hobby is the same as my job, I want to save notes of the things I learn while working. Because ideas come at any moment, I often want to throw something into my personal task manager's inbox and look at it again later. That task manager is well-suited to handle both the work and personal aspects of my life. Only my personal account has admin rights, but work sometimes requires me to install programs. My employer has no preference regarding my choice, so that is a non-issue. My work is essentially freelance web development, so advice given with that in mind will be much appreciated. Back up all opinion with some personal experience, please. Ideally, give a list of pros and cons and then name reasons for your position.

  Read the article

• How do I install the evaluation version of Windows Server 2012R2 VHD within a Windows Server 2008R2 Hyper-V system?

  - by Paul Hale

  I have a windows server 2008R2 running hyper-v. I have downloaded the Windows Server 2012RC DC Version from here... http://technet.microsoft.com/en-us/evalcenter/dn205286.aspx I am "forced" to install a download app that copy's a .vhd file to my chosen directory. The instructions on this page... http://technet.microsoft.com/library/dn303418.aspx say... To install the VHD Download the VHD file. Start Hyper-V Manager. On the Action menu, select Import Virtual Machine. Navigate to the directory that the virtual machine file was extracted to and select the directory (not the directory where the VHD file is located). Select the Copy the virtual machine option. Confirm that the import was successful by checking Hyper-V Manager. Configure the network adapter for the resulting virtual machine: right-click the virtual machine and select Settings. In the left pane, click Network Adapter. In the menu that appears, select one of the network adapters of the virtualization server, and then click OK. Start the virtual machine. Where it says "Navigate to the directory that the virtual machine file was extracted to and select the directory (not the directory where the VHD file is located). Select the Copy the virtual machine option." Well nothing has been extracted as far as I can tell? and if it has, I have no idea where or what im looking for? I tried creating a new VM and using the downloaded .vhd file but I got an error saying that the .vhd file is an incompatible format. Can anybody help me out please? Thanks, Paul

  Read the article

• Tomcat deployment overwrites context.xml

  - by Kristoffer

  Hi, I'm pretty new to Tomcat in general, so please point out if got anything wrong. My question is regarding updates to already deployed apps, using the Tomcat manager. But first thing first. I'm using the META-INF/Context.xml for storing connection info for the database connections, so this is unique to every server the application is deployed to. I'm not sure if this is optimal but it's the only way I know. So, when updating the application, it's important that this file doesn't get modified, because I don't want to have to go in and remake all changes every time I update my app. For updating, I'm using the Tomcat Manager, and I've tried different approaches but everything seems to build on the process of undeploy, then deploy the new version. This way, the Context.xml gets removed/replaced by an empty Context.xml file. So my question is basically, how do I update a running webapp, and at the same time having the Context.xml left untouched? Btw, I'm running Tomcat 6.0.24.

  Read the article

• Disable XP disk check using FAT32

  - by mike xie

  Right now I'm using Windows XP and Macintosh on my MacBook Pro via Bootcamp. Sometimes my XP would crash and when I restarted it it would have to go through disk check, although it says I can skip it by pushing a key, but this never worked for me. I did a bit of research online on how to disable disk check and found chkntfs /x c: but when I tried this out in my cmd it said the disk is FAT32 format. I tried to convert my C: drive from FAT32 to NTFS by using convert c: /FS:NTFS but when I tried this it told me to locate my C: drive. I tried to type C: and Bootcamp but couldn't really get past it. I later saw someone said to use this: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager] "AutoChkTimeOut"=dword:0000000 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager] "BootExecute"=hex(7):61,00,75,00,74,00,6f,00,63,00,68,00,65,00,63,00,6b,00,20,\ 00,61,00,75,00,74,00,6f,00,63,00,68,00,6b,00,20,00,2a,00,00,00,00,00 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon] "SFCScan"=dword:00000000 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\cleanuppath] @=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\ 00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,63,00,6c,00,\ 65,00,61,00,6e,00,6d,00,67,00,72,00,2e,00,65,00,78,00,65,00,20,00,2f,00,44,\ 00,20,00,25,00,63,00,00,00 (Save it as .reg and execute it) I have just tried running it but am not really sure if it did anything (my laptop hasn't crashed yet :) ) Firstly, I am wondering if someone can tell me how to check if that script worked? Secondly, if that script didn't work, does anyone have any solution for these problems? Is there another way to disable disk check or is there another way for me to change my FAT32 to NTFS?

  Read the article

• Virtualbox - differencing disk based on different differencing disk

  - by Klinki

  I'm trying to create differencing image based on differencing image in VirtualBox 4.2.18. Official documentation says it should be possible: http://www.virtualbox.org/manual/ch05.html#diffimages Basically I want to achieve this drive hierarchy: + immutable image with Debian and all software installed +---- differencing image with specific configuration, autoreset=off, readonly +-------- differencing image with autoreset=on +---- another differencing image for different virtual machine +-------- differencing image with autoreset=on I successfully created differencing image based on differencing image, but I'm not able to connect it to virtual machine :( It always shows error: Failed to open the hard disk .... cannot register hard disk ... because hard disk with UUID ... already exists Here is screenshot of Virtual Media Manager and error dialog Virtual Media Manager Window screenshot Very strange is that the new differencing image (tempdrive.vdi) doesn't have Actual Size 0. I wasn't able to connect it, but still, it has 36KB of data on it... This is very similar to this older question: How to create a chained differencing disk of another differencing disk in Virtual Box? but suggested solution is not working anymore in VirtualBox 4.2.18, so I posted it as a new question. (Limit for posting links and screenshots is quite annoying..)

  Read the article

• Getting a "403 access denied" error instead of serving file (using django, gunicorn nginx)

  - by Finglish

  Getting a "403 access denied" error instead of serving file (using django, gunicorn nginx) I am attempting to use nginx to serve private files from django. For X-Access-Redirect settings I followed the following guide http://www.chicagodjango.com/blog/permission-based-file-serving/ Here is my site config file (/etc/nginx/site-available/sitename): server { listen 80; listen 443 default_server ssl; server_name localhost; client_max_body_size 50M; ssl_certificate /home/user/site.crt; ssl_certificate_key /home/user/site.key; access_log /home/user/nginx/access.log; error_log /home/user/nginx/error.log; location / { access_log /home/user/gunicorn/access.log; error_log /home/user/gunicorn/error.log; alias /path_to/app; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Scheme $scheme; proxy_pass http://127.0.0.1:8000; proxy_connect_timeout 100s; proxy_send_timeout 100s; proxy_read_timeout 100s; } location /protected/ { internal; alias /home/user/protected; } } I then tried using the following in my django view to test the download: response = HttpResponse() response['Content-Type'] = "application/zip" response['X-Accel-Redirect'] = '/protected/test.zip' return response but instead of the file download I get: 403 Forbidden nginx/1.1.19 Please note: I have removed all the personal data from the the config file, so if there are any obvious mistakes not related to my error that is probably why. My nginx error log gives me the following: 2012/09/18 13:44:36 [error] 23705#0: *44 directory index of "/home/user/protected/" is forbidden, client: 80.221.147.225, server: localhost, request: "GET /icbdazzled/tmpdir/ HTTP/1.1", host: "www.icb.fi"

  Read the article

• Using AT on Ubuntu to Background Downloads (w/ Queue)

  - by Nicholas Yost

  I am writing a PHP script, but I want to use the AT command in Ubuntu to fetch a remote file via WGET. I'm basically looking to background the process, so PHP can finish fairly quickly. I cannot find any questions on here about how to use both, but I basically want to do the following pseudo-code: <?php exec('at now -q queuename wget http://path.to/remote/file.ext'); ?> Additionally, I'd like to queue this between providers. I'd like to have each path.to have its own queue, so I only download one file from each provider at a time. Meaning: <?php exec('at now -q remote wget http://path.to/remote/file.ext /local/path'); exec('at now -q vendorone wget http://vendor.one/remote/file.ext /local/path'); exec('at now -q vendortwo wget http://vendor.two/remote/file.ext /local/path'); exec('at now -q vendorone wget http://vendor.one/remote/file.ext /local/path'); ?> This should download the files from path.to, vendor.one, vendor.two immediately, and when the first file is finished downloading from vendor.one, it starts the second file. Does that make sense? I can't find anything like this anywhere on the web, much less on SO/SF. If we can use the crontab to run a one-off wget command, thats fine too.

  Read the article

• Attempting to bootstrap and getting weird errors

  - by miah

  I'm on a new computer(mac 10.9.2) and I am attempting to bootstrap my companies project, but setuptools is failing. I can run python bootstrap.py, which creates the ./bin/buildout, but when I run the buildout, it returns the following error: Traceback (most recent call last): File "./bin/buildout", line 17, in <module> import zc.buildout.buildout File "/Users/miah/Documents/realmassive/joson/eggs/zc.buildout-1.7.1-py2.7. egg/zc/buildout/buildout.py", line 40, in <module> import zc.buildout.download File "/Users/miah/Documents/realmassive/joson/eggs/zc.buildout-1.7.1-py2.7. egg/zc/buildout/download.py", line 20, in <module> from zc.buildout.easy_install import realpath File "/Users/miah/Documents/realmassive/joson/eggs/zc.buildout-1.7.1-py2.7. egg/zc/buildout/easy_install.py", line 29, in <module> import setuptools.archive_util File "build/bdist.macosx-10.9-intel/egg/setuptools/archive_util.py", line 15, in <module> ImportError: cannot import name ContextualZipFile I've attempted installing it via https://pypi.python.org/pypi/setuptools#unix-including-mac-os-x-curl and homebrew.

  Read the article

< Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >