Search Results

Search found 20016 results on 801 pages for 'download manager'.

Page 300/801 | < Previous Page | 296 297 298 299 300 301 302 303 304 305 306 307  | Next Page >

• Update BIOS on Sun Fire X4150 server

  - by Massimo

  I have some Sun Fire X4150 servers with a very old BIOS release (1ADQW015), which seems to have some compatibility problems with WMware ESX Server 3.5 and Windows 2008 R2 virtual machines; so I want to update the BIOS on them. The problem: according to this page, if your servers run ELOM (mine do), you first need to update to the latest ELOM release, then to the interim transition release, then finally you can update to the latest one. Ok, I'm willing to do that... but it looks like Sun (now Oracle) will happily let you download the latest firmware DVD (3.3.0), but it will not let you download the transition release (2.0) if you don't have a support contract. Well, I actuall don't care at all about the servers' management controllers (we don't even use them), so upgrading from ELOM to ILOM is totally irrelevant to me; but I need to update the servers' BIOS. So my question is: can I update the servers' BIOS to the latest version without doing the full ELOM-to-ILOM migration, or will this not work (or even make the servers unusable)? Do BIOS versions and SP ones need to be matched, or can one be updated without bothering with the other? Bonus question: if this whole ELOM-to-ILOM thing actually is needed in order to update the BIOS, can that 2.0 CD-ROM be obtained without having a support contract with Sun/Oracle (which we are definitely not going to sign, being that quite old hardware)? Update: I tried upgrading only the BIOS on one of the servers, and it didn't boot anymore. So it really looks like a full firmware upgrade is needed, and the management controller and BIOS versions should be kept in sync. So... where can I find that *&!£%$% 2.0 CD-ROM? Or at least the transition firmware that can be found on it?

  Read the article

• Setup Firefox to save .pages as .zip automatically

  - by Mike Dtrick

  What do I want to do? I would like Firefox to save files with the .pages extension as .zip files automatically. Scenario You are browsing through your emails and you notice your friend just sent you an email with a file attached (a .pages in this example). Unfortunately, you have a laptop that runs Windows. Your friend continues to send tons of emails with .pages files attached and you are tired of manually saving the files as a .zip file. Ultimately, you would like Firefox to be set up so that the download/file manager recognizes the .pages extension and automatically converts it to a .zip file. What have I done? I have saved files manually by selecting save as "All Files" and setting the extension to .zip. I've gone through Firefox and their documentation and have not found anything on how to complete this task. Why am I doing this? To save time (only a few seconds, not the main reason). I would like to setup a simple solution that "converts" a file automatically without having to recall steps on how to achieve the task manually (for clients who aren't exactly tech savvy). So that clients with Windows can access the files. IMPORTANT NOTE: I am not trying to save the web page, rather an Apple document equivalent to Microsoft Word. UPDATE: The really easy method would be to save one file, right click it, choose properties and open all .pages files up with WinRAR (or any other program that extracts files from a compressed folder). For the sake of learning, I am going to "neglect" this method and continue to do some research on Firefox add-ons. I would still like to have Firefox or the download manager to do the bulk of the work for converting the file.

  Read the article

• Windows 7 Not Recognizing Camera Nor iPhone as Camera

  - by taudep

  I've been struggling with this one for a few days. I've recently upgraded an older computer to Windows 7 Home Premium. Neither my digital camera (A Canon SD1200IS) nor iPhone are ever detected as cameras, nor ever show up as accessable in Explorer. With the Canon camera, no driver is required. It's supposed to work with the default Windows 7 drivers. However, in the Control Panel's Device Manager, I'm always seeing a yellow icon next to the "Canon Digital Camera" device. I've uninstalled the device and let Windows attempt to reinstall, but it can never find a driver to install. With the iPhone, it's very similar. One big difference, though, is that iTunes can see the iPhone and back it up, etc. However, again when I go to the Device Manager, there's a yellow icon next to the iPhone. I've uninstalled iTunes, reinstalled, rebooted, deleted drivers, and let Window try to reinstall the driver, but it can never find the driver. So there seems to be some correlation that my machine can't detect cameras properly, and that it might be even a lower-level type of driver I'm struggling with. I know that USB however, does work, because I have have an external drive hooked into the machine. I've gone through the web and tried two hours worth of fixes, without success. I feel like if I can get the Canon camera detected, then the iPhone will be on it's way to being fixed too. BTW, I couldn't really find anything of use in the Event viewer. Any and all suggestions welcome.

  Read the article

• IIS crashes with unhandled exception in ASP.NET

  - by SnowCrash

  We had an issue recently with an unhandled exception in an ASP.NET C# application bringing down IIS and all application pools that it was hosting. IIS Manager was unable to restart or stop/start the service and I was unable start IIS again after killing w3wp.exe in the task manager. A system reboot restored IIS to a running state; as a primarily Linux admin, I generally consider an unplanned system reboot to resolve a software error to be an act of high heresy. Is there a way to "harden" IIS so that a faulting application does not affect anything but the request that exposes the fault? Some details on the server and application fault. IIS: 7.5 .NET: 4.0 Windows Server 2008 R2 Faulted on call to System.Net.Dns.Resolve() with a url pointing to a non-existant domain as the argument. (I'm aware that this method is deprecated but the point that a page code issue shouldn't bring down the server still stands) The exception generated was SocketException. The faulting module according to event viewer was KERNELBASE.dll The issue was resolved by wrapping the call in a try-catch, logging the exception and displaying some generic content on the page. I'm hoping that I missed something in the IIS config that would switch it to "production" mode or something.

  Read the article

• Setting up Live @ EDU

  - by user73721

  [PROBLEM] Hello everyone. I have a small issue here. We are trying to get our exchange accounts for students only ported over from an exchange server 2003 to the Microsoft cloud services known as live @ EDU. The problem we are having is that in order to do this we need to install 2 pieces of software 1: OLSync 2: Microsoft Identity Life cycle Manager "Download the Galsync.msi here" the "Here" link takes you to a page that needs a login for an admin account for live @ EDU. That part works. However once logged in it redirects to a page that states: https://connect.microsoft.com/site185/Downloads/DownloadDetails.aspx?DownloadID=26407 Page Not Found The content that you requested cannot be found or you do not have permission to view it. If you believe you have reached this page in error, click the Help link at the top of the page to report the issue and include this ID in your e-mail: afa16bf4-3df0-437c-893a-8005f978c96c [WHAT I NEED] I need to download that file. Does anyone know of an alternative location for that installation file? I also need to obtain Identity Lifecycle Management (ILM) Server 2007, Feature Pack 1 (FP1). If anyone has any helpful information that would be fantastic! As well if anyone has completed a migration of account from a on site exchange 2003 server to the Microsoft Live @ EDU servers any general guidance would be helpful! Thanks in advance.

  Read the article

• Is there a way to run CUDA applications with the CUDA device being a secondary adapter?

  - by Slartibartfast

  I've been trying to run a CUDA program on a remote computer which has Windows 7 installed. The GPU is GeForce GTX 480. One of the problems I've been facing is that, the computer has two adapters, 1) Standard VGA Adapter 2) NVIDIA GeForce GTX 480 Even though this shows in the device manager. The desktop uses the standard VGA Adapter. I'm assuming this is because the Standard VGA is the primary adapter. Also the device manager shows that the monitor is connected to the standard VGA Adapter. In this scenario if i try to run any CUDA application it fails to recognise a CUDA capable device. Is it necessary for the NVIDIA adapter to be the primary one? Or is there any way to use CUDA when the graphics card is a secondary adapter. I've seen a few posts in the NVIDIA forums on this before, one suggests using another low cost NVIDIA card as the primary adapter, but that is currently not an option. I couldn't find any other solutions. Thanks I tried running the deviceQuery test from the NVIDIA GPU Computing Samples. This was the result i obtained CUDA Device Query (Runtime API) version (CUDART static linking) cudaGetDeviceCount FAILED CUDA Driver and Runtime version may be mismatched FAILED The driver version I'm using is 263.06. The CUDA version is 3.2 I ran the same test on my desktop which also has windows 7 and a GeForce GTX 465. The CUDA toolkit version is 3.2. The driver version was the same and the test passed, although it failed with an older driver.

  Read the article

• Traffic shaping on Linux with HTB: weird results

  - by DADGAD

  I'm trying to have some simple bandwidth throttling set up on a Linux server and I'm running into what seems to be very weird stuff despite a seemingly trivial config. I want to shape traffic coming to a specific client IP (10.41.240.240) to a hard maximum of 75Kbit/s. Here's how I set up the shaping: # tc qdisc add dev eth1 root handle 1: htb default 1 r2q 1 # tc class add dev eth1 parent 1: classid 1:1 htb rate 75Kbit # tc class add dev eth1 parent 1:1 classid 1:10 htb rate 75kbit # tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip dst 10.41.240.240 flowid 1:10 To test, I start a file download over HTTP from the said client machine and measure the resulting speed by looking at Kb/s in Firefox. Now, the behaviour is rather puzzling: the DL starts at about 10Kbyte/s and proceeds to pick up speed until it stabilizes at about 75Kbytes/s (Kilobytes, not Kilobits as configured!). Then, If I start several parallel downloads of that very same file, each download stabilizes at about 45Kbytes/s; the combined speed of those downloads thus greatly exceeds the configured maximum. Here's what I get when probing tc for debug info [root@kup-gw-02 /]# tc -s qdisc show dev eth1 qdisc htb 1: r2q 1 default 1 direct_packets_stat 1 Sent 17475717 bytes 1334 pkt (dropped 0, overlimits 2782 requeues 0) rate 0bit 0pps backlog 0b 12p requeues 0 [root@kup-gw-02 /]# tc -s class show dev eth1 class htb 1:1 root rate 75000bit ceil 75000bit burst 1608b cburst 1608b Sent 14369397 bytes 1124 pkt (dropped 0, overlimits 0 requeues 0) rate 577896bit 5pps backlog 0b 0p requeues 0 lended: 1 borrowed: 0 giants: 1938 tokens: -205561 ctokens: -205561 class htb 1:10 parent 1:1 prio 0 **rate 75000bit ceil 75000bit** burst 1608b cburst 1608b Sent 14529077 bytes 1134 pkt (dropped 0, overlimits 0 requeues 0) **rate 589888bit** 5pps backlog 0b 11p requeues 0 lended: 1123 borrowed: 0 giants: 1938 tokens: -205561 ctokens: -205561 What I can't for the life of me understand is this: how come I get a "rate 589888bit 5pps" with a config of "rate 75000bit ceil 75000bit"? Why does the effective rate get so much higher than the configured rate? What am I doing wrong? Why is it behaving the way it is? Please help, I'm stumped. Thanks guys.

  Read the article

• Blink build with Xcode failed

  - by Merci

  I found a GPL-ed SIP client for Mac, Blink. I'd like to build it from source since the binaries are only available as paid download. Just FYI i'm studying programming at university but have no experience in building complex application from source. After downloading the content of the repository i opened the Xcode project and tried to build on OS X 10.7, Xcode 4.2.1. Unfortunately the build fail with 1 error and many warnings Most of the warnings are like this: Attribute Unavailable: Custom Identifiers in Interface Builder versions prior to 3.2 The error message is: Apple Mach-O Linker (ld) Error Command /Developer/usr/bin/clang failed with exit code 1 preceded by the warning Apple Mach-O Linker (ld) Warning directory not found for option '-L/Users/Sergio/Downloads/Blink/devel.ag-projects.com/repositories/public/blink-cocoa/Distribution/Frameworks' I notice that in the list of required files i have this files missing: Dependencies/Frameworks libgcrypt.11.6.0.dylib libgcrypt.11.dylib libgnutls-extra.26.dylib libgnutls.26.dylib libgpg-error.0.dylib libintl.8.dylib liblzo.1.dylib libtasn1.3.dylib Dependencies/Resources lib Frameworks/Linked Frameworks Sparkle.framework Products Blink.app It should be possible to download these files somewhere. Unfortunately googling did not help. There's no documentation on the project site.

  Read the article

• The SSL certificate doesn't established

  - by Andrey Eagle

  situation following: Windows Server 2008 R2 platform. Certificate installation in the IIS Manager occurs successfully with *.cer file but if I refresh the manager (F5), the certificate vanishes from the list. And, respectively in the Bindings window, at https addition, the certificate is absent in the menu. Thus if to open certificates via the MMS console, it can be seen in the Personal store. Whether there is any possibility to make so that the web server could "see" this certificate or how to make so that it didn't disappear from the list? Prompt how to solve this problem, thanks in advance! P.S. The certificate is acquired in tawte. In total that to me provided, these are account data where it is possible simply with save-pastit the certificate in 2 options: PKCS#7 and X.509. Here is the manual I used. P.S.2 If Complete Certificate Request with *.p7b I get an error: Cannot find the certificate request that is associated with this certificate file. Acertificate request must be comleted on the computer where the request was created.

  Read the article

• DVD drive won't work after installing software

  - by Dan

  DVD drive was already region-free but for some reason would not play a certain DVD as it was the "wrong region". This is the first time I've played a DVD on the drive, but I've imported a lot of CDs before and they always worked fine, even CDs bought from the USA (I live in the UK). To get around this, I downloaded a piece of software called "DVD Region Killer". (Clicking the link won't start the download, so go ahead and check it.) After this, the drive isn't recognised. It won't show up in "My Computer", and when I insert a disc it will start to whir but not take action, i.e. iTunes won't recognise that I have put a CD in. In the Device Manager, the drive shows up with a caution-sign. The device status reads: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Disabling, uninstalling and reinstalling does not help. Clearly the software download is the issue, but it is difficult to remove. The only files I can find in Program Files are: C:\Program Files (x86)\Elaborate Bytes\DVD Region Killer which contains a changelog and a HTML document which has no info on uninstalling. It doesn't show up on "Add or Remove Programs", or even as a background process when I press ctrl-alt-del. Apparently it has no interface as such, and can be accessed by an icon in the system tray, (see review in link) but I don't see the icon. If it helps to know, I have a Dell Inspiron running Windows 8 64-bit, and the model of the DVD drive is: MATSHITA DVD+-RW UJ8C2 Thanks in advance.

  Read the article

• How to install Predis

  - by user782860

  I am trying to install Predis, but keep getting a 500 Server errror. Here is what I have done. 1.) Have apache and php installed on Ubuntu Natty. 2.) Used the instructions on this page http://redis.io/download to download Redis. 3.) Ran the following example to confirm that Redis is working: $ src/redis-cli redis> set foo bar OK redis> get foo "bar" 4.) Have a local website at /home/user/Dropbox/documents/www/mywebsite.com/index.php and have confirmed that php is working. 5.) Downloaded the .zip version of Predis ( https://github.com/nrk/predis Version: v0.6.6-PHP5.2 ), and unzipped the contents to /home/user/Dropbox/documents/www/mywebsite.com/. So now Predis is here: /home/user/Dropbox/documents/www/mywebsite.com/nrk-predis-3bf1230/ 6.) Opened the /home/user/Dropbox/documents/www/mywebsite.com/index.php page. Here is its contents: <? define("PREDIS_BASE_PATH", "nrk-predis-3bf1230/lib/"); spl_autoload_register(function($class) { $file = PREDIS_BASE_PATH.strtr($class, '\\', '/').'.php'; if (file_exists($file)) { require $file; return true; } }); $redis = new Predis_Client(); $redis->set('foo', 'bar'); $value = $redis->get('foo'); ?> I have tried changing: $redis = new Predis_Client(); to: $redis = new Predis\Client(); Have tried changing the the PREDIS_BASE_PATH to: /nrk-predis-3bf1230/lib /home/user/Dropbox/documents/www/mywebsite.com/nrk-predis-3bf1230/lib/ /home/user/Dropbox/documents/www/mywebsite.com/nrk-predis-3bf1230/lib Have done a chmod +x on both: /home/user/Dropbox/documents/www/mywebsite.com/nrk-predis-3bf1230/ /home/user/Dropbox/documents/www/mywebsite.com And doing all of the above always results in a 500 server error. What am I doing wrong?

  Read the article

• Exclude list of specific files in wget

  - by nanker

  I am trying to download a lot of pages from a website on dial-up and it can be brutally slow. I have almost got the perfect wget command, but because I'm downloading pages from the same site wget wastes times downloading the same standard images for each page. If I know the name of the default page images, is there any way to have wget ignore and thus avoid downloading those for each and every page? Here is an example of one of the wget commands that my shell script generates into another shell script to download all of the pages: mkdir candy-canes-on-the-flannel-board-in-preschool cd candy-canes-on-the-flannel-board-in-preschool wget -p -nd -A jpg,html -k http://www.teachpreschool.org/2011/12/candy-canes-on-the-flannel-board-in-preschool/ wget -c --random-wait --timeout=30 --user-agent="Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.3) Gecko/2008092416 Firefox/3.0.3" http://www.teachpreschool.org/2011/12/candy-canes-on-the-flannel-board-in-preschool/ -O "candy-canes-on-the-flannel-board-in-preschool" rm Baby-and-Toddler.jpg Childrens-Books.jpg Creative-Art.jpg Felt-Fun.jpg Happy_Rainbow-e1338766526528.jpg index.html Language-and-Literacy.jpg Light-table-Button.jpg Math.jpg Outdoor-Play.jpg outer-jacket1-300x153.jpg preschoolspot-button-small.jpg robots.txt Science-and-Nature.jpg Signature-2.jpg Story-Telling.jpg Tags-on-Preschool.jpg Teaching-Two-and-Three-Year-olds.jpg cd ../ Now I realize the script is not likely as savvy as it could be but it is doing what I need at the moment except that you can see from the rm command that I would just like to prevent wget from downloading the files in the first place if possible. I almost forgot to mention, there are two wget commands and that is because the first one downloads the page as index.html and for some reason it does not open in my browser, however, when I open it and look at it in vim all of the page's content is there, so I am not sure why it does not open. But if I just issue the second wget command as it is then that page, same file really with an alternate name, opens up fine. Something that if I could fix would also help to streamline the process.

  Read the article

• Restricting Access to Application(s) on Point of Sale system

  - by BSchlinker

  I have a customer with two point of sale systems, a few workstations and a Windows 2003 SBS Server. The point of sale systems are typically running QuickBooks Point of Sale and are logged in with a user who has restricted permissions / access (via Group Policy). Occasionally, one of the managers needs to be able to run a few additional applications -- including some accounting software. I have created an additional user for this manager, allowing them to login and access the accounting software. The problem is, it can be problematic to switch users on the system, as QuickBooks takes a few minutes to close (on POSUser) and then reopen (on ManagerUser). If customers are waiting, this slows things down drastically. Since the accounting software is stored on a network drive, it would be easiest if the manager could simply double click something, authenticate against the network drive / domain controller and then the program would launch. When they close the program, the session to the network drive would be lost and the program would no longer be accessible. Is there any easy way to do this? Both users are on a domain and the system is Windows 7. I just don't want to require the user to switch back and forth. In a worst case scenario, they forget to switch back and leave the accounting software wide open.

  Read the article

• Dell Driver Support for Latitude E6320 Windows 7 Enterprise

  - by IamPolaris

  I recently did a reinstall of Windows 7 Enterprise on a Dell Latitude E6320, which is a 64 bit system. After the install process, and doing typical Windows Update stuff, I looked at my Device Manager and found that I had devices which were missing drivers. My missing drivers: After going to the Dell Support site and looking at the files, and doing some sleuthing I found the following support document: http://downloads.dell.com/utility/Latitude%20E-Family%20%20Mobile%20Precision%20Re-Image%20How-To%20Guide%20-%20A03%20Rev%203%200.pdf This document hints in appendix C that the Broadcom USH is the Control Point Security and the Unknown device is Micro freefall sensor. The network controller is my wireless, as I cannot connect wirelessly, and the final missing driver I am not sure. Attempting to install the control point security exe on the support page will not work. After downloading, I am given the message that I am attempting to install a 32 bit driver on a 64 bit machine EVEN THOUGH I selected the win7 64 bit option from the support page. Beyond that, some of the drivers (Which are confusing to read and hard to understand what they do) and the system utilities which are supposedly supposed to make this process simpler will either a) not run because they are 32 bit exe's or b) the support page cannot find the file attempted to download. Is there anything I can do to get (at the very least) my wireless running, but idealistically all of my drivers. A solution which assumes Dell is completely incompetent would be ideal. :P Some forums have said that I should download the chipset driver, others say to get the system utility file (DSS_UTIL_WIN_R282536.EXE). I have had no luck as of yet...

  Read the article

• HOW TO save Contacts from iPhone to Computer?

  - by goodm

  Step 1: Download [b]Tansee iPhone Transfer Contact[/b] free trial version [url="http://softseeking.com/prodail.aspx?proid=47"]here[/url],then install the software (skip if done yet). u can download at:[url="http://www.softseeking.com/prodail.aspx?proid=47"]http://www.softseeking.com/prodail.aspx?proid=47[/url] Step 2: Connect iPhone to your computer. Step 3: Run Tansee iPhone Transfer Contact , your contacts on iPhone memory will display as shown in your iPhone screen automatically as fig 1. Click on single name, all his or her information will display as fig 2 shown. Step 4-a: In fig 1 situation, you can click button "Copy" to copy all contacts from your iPhone to your computer , then select options: 1: Choose File Type: backup to TXT file, ANTC file or CSV file; 2: Choose File Path: You can change the backup path if you do not use default path. 3: Advanced Option: if you choose ANTC format in step 1, you can add a password to protect the file. Note: We do not know the password, so please do remember it. Click OK Button to finish the Copy. See fig 3. Note: You can only copy the first 5 contacts with trail version.[/SIZE] [/SIZE] [size=3][size=3]Step 4-b: In fig 2 situation, click button "Copy Contact From who" to copy contact of a single person, select options: 1: Choose File Type: Backup contacts to TXT file, and CSV file in single contact transfer; 2: Choose File Path: You can change the backup path if you do not use default path; 3: Advanced Option: Disabled in single contact transfer. Click OK Button to finish the Copy. See fig 4. Note: You can only copy the first 5 contacts in trail version.[/size] [/size]

  Read the article

• Cluster Core Resource state of Exchange 2010 DAG

  - by Christoph

  I have two Exchange 2010 servers in a DAG and a witness server to implement mailbox resiliency. The two Exchange servers are in two subnets and the Windows failover cluster therefore has two IP address resources. I now that Exchange uses "core functionality" of Windows Server failover clustering, but it does not use all features. My setup also seems to work, but if I run the validation in the Windows Failover Cluster Manager, it complains about one of the IP address resources being offline. However, I cannot bring this resource online, because the server complains that "the specified cluster node is not the owner of the resource, or the node is not a possible owner of the resource". If I "Simulate failure of this resource", it becomes offline and the other IP becomes online. I have the vague idea that Exchange might use the state of the IP resource to identify the Primary Active Manager, but I am not sure. As it is obviously important that failover really works, I would like to be sure. Therefore, my question is: Is it normal that only one IP address resource in a Exchange 2010 DAG failover cluster is active at a time? If not, how do I bring both resources online at the same time given the error described above?

  Read the article

• What's next for all of these Microsoft "overlapping" and "enhanced" products ?

  - by indyvoyage

  Recently I attended a road show, organised by MS Gold Partner company in the UK. The products discussed were: SharePoint server (2010 and 2007), Exchange server, Office Communication Server 2007, Exchange hosted services Office Live meeting, Office Communicator, System Center Configuration Manager and Operation Manager, VMware, Windows 7 etc. As Microsoft claims the enhancement in the each product against higher version, I felt that clients are not much interested in all these details. For example Office Communicator, surely they have improved a lot the product and first site all said 'WOW' great product, but nobody wish to pay money for all these extra features. Some argued, they are bogged down by all these increased number of menus. They don't need soft call feature included with mobile call. It apply for all other products as well such as MS office (next what 2 ribbons ?), windows OS and many more. Indeed there must be good features in all these products, but is it worth to spend money and time to update the older system ? Also sometimes these feature will decrease the productivity instead increase it. *So do you think what ever enhancement MS is doing in the products is only for selling purpose, not a real use ?? and I think also keep the developer busy learning the new tools and features. * I am sure some some people here will argue that some people need this sort of features. But I am not talking about NASA or MI5 guys. I am talking of usual businesses and joe public. Any ideas welcome.

  Read the article

• come on!teach u save photos from iphone to computer

  - by goodm

  i am using iphone ,when we have fun,we took a lot of nice pics ,but,that is a question,how to transfer photos from iphone to computer,now ,let me show you,step by step: Step 1: Download Tansee iPhone Transfer Photo free trial version here,and then install it. You also need iTunes above 7.3 installed.or download at: http://www.softseeking.com/prodail.aspx?proid=74 Step 2: Connect iPhone to your computer. Step 3: Launch Tansee iPhone Transfer Photo and all the photos in your iPhone will display automatically, Step 4: Select the photos to be transferred to your computer, the selected file will marked with red border. You can select photos by click on each one, or just drag a rectangle to select a bundle of photos. You can also select all photos by click right button of your mouse or click "File" to choose. Note: you can only select first 6 photos if you haven't purchase. Step 5: Click "Copy" button to select output path and start to transfer photos to your computer: iPhone Camera Photo & Camera Video: Click "Camera Roll", do as steps above can copy your iPhone Camera Photos and iPhone Camera Videos to PC. Options Setting 1.Backup File Format: To select backup photo file format, Tansee iPhone Transfer Photo support BMP and JPG file now. 2.Backup Path: To select directory for storing the backup photos. You can select backup directory for each photo during backup by check "Ask Every Time" or store all files in a specified directory by checking "Save Here" and select the directory in the edit box. 3.Backup Resolution: To select the photo size to be backup.

  Read the article

• Understanding how IE's SmartScreen works

  - by Kevin Donn

  Today I downloaded an update to our mail server on my dev machine using IE9 on Win7 Pro. I directed IE to save the file on our server's shared drive so I could install it later. When the download finished, IE showed a red banner at the bottom and said that, ".exe is not commonly downloaded and could harm your computer." There were three buttons, "Delete", "Actions", and "View downloads". I selected "Actions" just because I had never seen this before. It showed a "SmartScreen Filter" dialog basically giving three choices: "Don't run this program (recommended)", "Delete program", and "Run anyway". I just canceled the dialog because I didn't want to run it in the first place; I just wanted to download it so I could run it later on the server. So when I did try to run it, it would blow up immediately saying, "Setup was unable to create the directory - Error 5: Access is denied." I tried unblocking the file, "Run as Administrator" even though I already was Administrator, turning off UAC, etc. Cutting to the chase, I finally downloaded the file again, ran WinMerge on the two and it showed they were identical, except the new one ran fine. I went back to my dev machine, downloaded the file through Firefox and then ran it on the server, again fine. But when I tried again through IE, again SmartScreen showed its red banner and somehow clobbered the file even though it was stored on another machine, and WinMerge can't tell the difference between it and a good file. I've looked around on the web for how SmartScreen works, but they all give user-level descriptions of it. What I want to know is, what does it do to that file to make it unrunnable on another machine? Thanks

  Read the article

• Ubuntu Server hack

  - by haxpanel

  Hi! I looked at netstat and I noticed that someone besides me is connected to the server by ssh. I looked after this because my user has the only one ssh access. I found this in an ftp user .bash_history file: w uname -a ls -a sudo su wget qiss.ucoz.de/2010/.jpg wget qiss.ucoz.de/2010.jpg tar xzvf 2010.jpg rm -rf 2010.jpg cd 2010/ ls -a ./2010 ./2010x64 ./2.6.31 uname -a ls -a ./2.6.37-rc2 python rh2010.py cd .. ls -a rm -rf 2010/ ls -a wget qiss.ucoz.de/ubuntu2010_2.jpg tar xzvf ubuntu2010_2.jpg rm -rf ubuntu2010_2.jpg ./ubuntu2010-2 ./ubuntu2010-2 ./ubuntu2010-2 cat /etc/issue umask 0 dpkg -S /lib/libpcprofile.so ls -l /lib/libpcprofile.so LD_AUDIT="libpcprofile.so" PCPROFILE_OUTPUT="/etc/cron.d/exploit" ping ping gcc touch a.sh nano a.sh vi a.sh vim wget qiss.ucoz.de/ubuntu10.sh sh ubuntu10.sh nano ubuntu10.sh ls -a rm -rf ubuntu10.sh . .. a.sh .cache ubuntu10.sh ubuntu2010-2 ls -a wget qiss.ucoz.de/ubuntu10.sh sh ubuntu10.sh ls -a rm -rf ubuntu10.sh wget http://download.microsoft.com/download/win2000platform/SP/SP3/NT5/EN-US/W2Ksp3.exe rm -rf W2Ksp3.exe passwd The system is in a jail. Does it matter in the current case? What shall i do? Thanks for everyone!! I have done these: - ban the connected ssh host with iptables - stoped the sshd in the jail - saved: bach_history, syslog, dmesg, files in the bash_history's wget lines

  Read the article

• How can I update generic non-pnp monitor?

  - by njk

  Background I've been running a KVM switch with my monitor at 1920 x 1080 over VGA for over a year. Did a Windows Update on 12/11/12 which did the following: Update for Windows 7 for x64-based Systems (KB2779562) Security Update for Windows 7 for x64-based Systems (KB2779030) Cumulative Security Update for Internet Explorer 8 for Windows 7 for x64-based Systems (KB2761465) Windows Malicious Software Removal Tool x64 - December 2012 (KB890830) Security Update for Windows 7 for x64-based Systems (KB2753842) Security Update for Windows 7 for x64-based Systems (KB2758857) Security Update for Windows 7 for x64-based Systems (KB2770660) After a restart, my extended monitor was dark. I attempted to reset the extended display configuration, and noticed my monitor was being detected as a Generic Non-PnP Monitor: I uninstalled, downloaded new, and re-installed display drivers. Nothing. I attempted to unplug my monitor from the power for 15 minutes. Nothing. I followed some of the suggestions on this thread; specifically DanM's which suggested to create a new *.inf file and replace that in Device Manager. Device Manager said the "best driver software for your device is already installed". The only thing that works is when the monitor is directly attached to the laptop. This obviously is not what I want. My thought is to somehow remove the Generic Non-PnP Monitor from registry. How would I accomplish this and would this help? Any other suggestions? Relevant Hardware ASUS VE276 Monitor TRENDnet 2-Port USB KVM Switch (TK-207K) HP Laptop w/ ATI Radeon HD 4200 Screens

  Read the article

• Cant kill process on Windows Server 2008!! - Thread in Wait:Executive State

  - by adrian

  I hope someone can help me with our issue we are having. We have a major issue with a process that we can not kill and the only way to get rid of the process is to reboot the machine. I have tried killing it from the normal task manager but no joy. I have tried killing it using the taskkill /F command from a command prompt and no joy. The command reports as sucessful but the process remains. I have tried to start task manager with system rights by calling "psexec -s -i -d taskmgr" and attempting to kill the process but no joy I have tried killing it from Process Explorer but again the process remains. I have tried creating a scheduled task that runs under the SYSTEM name to kill the task but that also does not kill it : schtasks /create /ru system /sc once /st 13:16 /tn test1 /tr "taskkill /F /PID 1576" /it Nothing I do will kill this process. Even logging off and logging back on will not kill this process. Using Process Explorer I notice that there is on stubborn thread that is in the Wait:Executive state. I have tried to kill this thread using Process Explorer but again no joy. We are using Windows Server 2008 R2 64-Bit. The server is brand new and windows is freshly installed. Now heres the thing. We have brought two identical servers from Dell with the same specs and the same OS installed and I can not replicate this issue on the other server. Only on this server, under certain circumstances does this server process hang and can not be restarted! I have also changed the compatability mode by setting it the process to "Windows 2003" but this has not helped. I have noticed in Process Explorer that DEP is turned on but im not sure this has got any bearing on the issue ot not. Please, can someone help??

  Read the article

• Netbook (Samsung N220) on Ubuntu 10.04 slows down WiFi for other computers

  - by Joachim

  I encountered a really odd problem with my new netbook. I am running Ubuntu 10.04 on a Samsung N220 Mito. So far everything worked fine. Now I tried the machine for the first time in our work group where we have a wifi (with internet access) for all laptops. The wifi is controlled by a computer running Suse 9.3 which provides a DHCP server and imposes a firewall. At the moment there is only a macbook in the wifi, where no problems with the internet or wifi connection are encountered. Now coming to my actual problem: In addition to the macbook i connect the Samsung N220 to the Wifi. Problem: My download speed is for some reason limited to 70KB/s max. This is neither a limitation of the server/website i browse on, nor a configuration of the netbook: at home i have 500KB/s download speeds. Furthermore, it is not a default limitation for "untrusted" or "new machines" in the wifi, as for instance other new laptops get full speed internet with our wifi. Problem: Once the Samsung N220 is generating traffic in the wifi, the wifi is slowed down dramatically for all other machines: I run a ping to the router from the macbook. The ping times with the N220 ideling are 2-6ms. When I start downloading or browsing in the web with the N220 the ping speed drops to 800ms. Vice versa, when the macbook is generating the traffic the ping of the N220 to the rooter stays constant at around 2-6ms. So clearly, it is some problem originating from my netbook or maybe its treatment in the wifi. Thanks for any help

  Read the article

• Massive Memory Leaks?

  - by Mads

  Hi, I seem to have huge memory leaks, which are confusing me. I'm running fusion 3.1 / Windows 7 on Snow Leopard. It's a clean install with all upgrades applied. I've given fusion 8GB on a 14GB machine. I've installed VS2008 & Eclipse in Windows 7. Nothing unusual. Inside Task Manager in Windows 7, my memory footprint stays reasonable, at <2GB. But in OSX, Activity Monitor shows the footprint of vmware-vmx to be much larger. It starts at 2 GB, which seems fine, but whenever I'm actually doing anything in Windows, vmware-vmx's footprint grows at a few MB per second. After 20 mins or so it's using ~10GB and everything grinds to a halt. Throughout this, Task Manager still says I'm only using 2GB. And whatever I do in windows seems to increase vmware-vmx's memory footprint. Even closing down an application seems to make it go up. So is this par for the course in fusion? I was previously using parallels 3 / Vista under Leopard, and it worked fine. I'd assumed my new fusion config would work better, but this makes it completely unusable. (And apparently I can't even ask tech support unless I buy a support package...) Any advice much appreciated. Thanks

  Read the article

• Cannot find wireless driver for HP laptop

  - by rodey

  I have an HP laptop (model: dv7-1267cl, Windows 7 64-bit Home Premium) and I cannot find the wireless driver for the laptop. I am need of a different version because my wireless connection under Windows is flaky and unreliable. I have problems printing to my wireless printer and logging in to and using several sites like reddit.com, phoenix.edu and facebook.com - I get several "page cannot be displayed" messages while using my wireless connection. I disable my wireless adapter and use an ethernet cable and it all works fine. I also used an Ubuntu Live CD to confirm that there is not a problem with the hardware. This is software/driver issue. The drivers were auto installed by the OS. The Device Manager shows the wireless adapter as Atheros AR5009 802.11 a/g/n WiFi Adapter. I have checked the HP website for my laptop and they do not have wireless drivers listed for that model wireless adapter. I have also checked with atheros.com and I do not see my model adapter on their list of available hardware. Device Manager lists the Hardware ID's for my adapter as: PCI\VEN_168C&DEV_002A&SUBSYS_1381103C&REV_01 PCI\VEN_168C&DEV_002A&SUBSYS_1381103C PCI\VEN_168C&DEV_002A&CC_028000 PCI\VEN_168C&DEV_002A&CC_0280 A search for the first Hardware ID turned up this question from experts-exchange.com. tl;dr A driver does not exist for that model adapter.

  Read the article

< Previous Page | 296 297 298 299 300 301 302 303 304 305 306 307  | Next Page >