Search Results

Search found 17267 results on 691 pages for 'dynamic ip'.

Page 299/691 | < Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >

• Sharing a printer over the net from Windows 7 to Windows Server 2003

  - by Grant Unwin

  Hi, I need to share a printer that is connected to a Windows 7 computer. The windows 7 computer is in another building about an hours drive away. The computer that needs to access the printer is running Windows Server 2008. Ive tried setting the printer as 'shared' for 'everyone' on the Windows 7 PC and accessing it from the server by adding a TCP/IP port to the IP address but the printer just wont add. From googling aparently it may need setting up as a printer server through IIS, but i'm just not sure on the best practice. Any help greatly appreciated. Thanks Grant Unwin

  Read the article

• Hostname problems in CentOS 5.5

  - by spoon16

  I just set up a CentOS 5.5 machine on my local network and attempted to modify the hostname by editing /etc/sysconfig/network file. When I'm logged in locally the change to the hostname is reflected and seems to be working fine. When I open a SSH session via PuTTY from Windows this is what I see at the prompt: [root@? ~]# cat /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=yes HOSTNAME=mini.local [root@? ~]# sysctl kernel.hostname kernel.hostname = ? [root@? ~]# hostname ? [root@? ~]# hostname -f hostname: Unknown server error A couple of other symptoms that may be helpful in troubleshooting this problem. I can ping the CentOS box from my Windows machine via IP but not hostname. Also, my Netgear router does not display the hostname when I view the "Connected Devices", I do see the mac address and the proper IP listed though. How can I make it so that the hostname is properly propagated throughout my network?

  Read the article

• Is my system good enough for Hotmail Junk Mail Reporting Program? JMRP

  - by Marius

  Hello there! :) Thank you for a great website! I am interested in Hotmails Junk Mail Reporting Program (JMRP). One of the requirements they have are (translated from Norwegian to English), and I wonder if I qualify: Is the IP-address you registered subject to the company name/domain name? Or do you have your own sending rights from the IP address via the hosting company (that you do not share with other senders) We ask that you attach documents supporting this. These are my details: host: smtp.sharedhostingcompany.com username: username for my email account password: my private password. email address: [email protected] Is this what they require? Thank you for your time. Kind regards, Marius

  Read the article

• What equipment do real ISP's use?

  - by Allanrbo

  In a dormitory of 550 residents, people often mistakenly set up DHCP servers for the whole network by plugging in their private Wi-Fi routers wrongly. Also recently, someone mistakenly configured their PC to a static IP being the same as that of the default gateway. We use cheap 3Com switches at the moment. I know that Cisco switches support DHCP snooping to solve the DHCP problem, but that still does not solve the default gateway IP takeover problem. What sort of switch equipment do real ISP's use so their customers cannot break the network for the other customers?

  Read the article

• Reproducible file corruption for files on windows share

  - by bbuser

  We have about 40 file servers in our intranet to distribute software packages. The servers have names like example01, example02 etc. Every name resolves to a single IP-address (A-record) and the IP resolves back to that name (PTR) for every single server. The thing is, that for a certain file (mypackage.cab) I get different results depending on whether I use: \\192.0.2.01\fs\pkg\X12345678 or \\example01.foo\fs\pkg\X12345678 While in one case the file is correct in the other case the file has exactly the right size, but it is all zeros. For a certain combination of client and server I can reproduce this reliably. It doesn´t matter if I download in Windows Explorer, via robocopy or even from Linux with smbclient. It´s always the same, one file corrupt, the other ok. It happens only for certain combinations of clients and servers, not others. For example: client01 example01.foo -> OK (192.0.2.01 is also OK) client01 example02.foo -> broken (but 192.0.2.02 is OK) client02 example01.foo -> broken (but 192.0.2.01 is OK) client02 example02.foo -> OK (192.0.2.02 is also OK) client03 example06.foo -> OK (but 192.0.2.06 is broken) client03 example07.foo -> OK (192.0.2.07 is also OK) etc... In some cases I get the broken file when I use the IP address in other cases when I use the name. For every client the majority of servers is Ok, but from every client I tested I have at least 4 cases of broken files. All this happens only for mypackage.cab (about 5k in size), it never happened for any of the other files in the same directory. Confused? Certainly I am. Any idea what can cause this or any idea what to try to figure it out is welcome. Clients are Windows XP. Servers are NetApp filers I don´t have access to. I can (and will) contact the filer team again, but first I have to have an idea what is going on.

  Read the article

• How can I have APF block script kiddies that mod_security detects?

  - by Gaia

  In one of the vhosts' error_log I found thousands of lines like these, all from the same IP: [Mon Apr 19 08:15:59 2010] [error] [client 61.147.67.206] mod_security: Access denied with code 403. Pattern match "(chr|fwrite|fopen|system|e?chr|passthru|popen|proc_open|shell_exec|exec|proc_nice|proc_terminate|proc_get_status|proc_close|pfsockopen|leak|apache_child_terminate|posix_kill|posix_mkfifo|posix_setpgid|posix_setsid|posix_setuid|phpinfo)\\\\(.*\\\\)\\\\;" at THE_REQUEST [id "330001"] [rev "1"] [msg "Generic PHP exploit pattern denied"] [severity "CRITICAL"] [hostname "x.x.x.x"] [uri "//webmail/config.inc.php?p=phpinfo();"] Given how obvious the situation is, how come mod_security isnt automatically adding at least that IP to deny rules? There is no way someone hasnt thought of this before...

  Read the article

• Need IPSec help on Windows 2003

  - by user37456

  Hey guys, I am trying to configure IPSec between a web and app server in our environment. I want all traffic between these two servers to use IPsec and be encrypted. These servers are on the same domain so i am currently using Kerebos for security, I have also tried pre-defined keys and nothing changed. When I try and ping between the servers I get "Negotiating IP Security" everytime. I have also confirmed that when I change "Require Security" to "Permit" everything works so IPSec is working, I believe its something with my security setup. Under the security tab both servers have the default 3DES keys first and then DES keys. I have also specified tunnel endpoints (the alternate server's IP). What am I missing? Thanks for any help..

  Read the article

• Teredo and IPV6 web servers

  - by Sandro Antonucci

  Hello, I have two different questions, the first one could be stupid. I was reading about IPV6 and ended up in this site http://test-ipv6.com/ that says that I have a public IPV6 with Teredo tunneling. I don't understand if this Teredo is a software thing, does it have to with my ISP, is it enabled by Windows, how do I get that IPV6 IP, where does it come from? I have windows 7. Second question, I have a VPS with IPV6 connectivity only I can connect to it (apparently thanks to Teredo) and visit pages from the web server using IPV6 IP directly into the browser, is it possibile to host a website on there accessible by the IPV4 network? maybe some dns servers than tunnel traffic from IPV4(user) to IPV6(server)? Thank you

  Read the article

• Apache2 proxypass

  - by gatsby

  i'm trying to figure out why my apache2 reverse proxy doesn't work... hope someone can clarify. i'm using an apache server as a gateway with proxy pass: 10.184.1.2 is the IP. these are PP instructions i inserted in the 000-default config file. ProxyPass / http://192.168.102.31/ ProxyPassReverse / http://192.168.102.31/ the host 192.168.102.31 is an internal IP of a subnet wich is not reachable directly by clients, but only by the apache gateway. when i try to access such a address: http://apache_gateway_name/dir i see the client trying to reach 192.168.102.31 address and of course timeout occurs. can someone help? Best regards

  Read the article

• Can I port forward to an established reverse ssh tunnel

  - by Ben Holness

  I have three computers, A, B and C A has initiated a reverse ssh tunnel to B: ssh -nTNx -p 443 -R 22222:localhost:22 [user]@[server] If I log in to B, I can use 'ssh -p 22222 localhost' and I get a login prompt for A. If I try 'ssh -p 22222 [public IP of B]', it doesn't work What I would like to be able to do is have C connect to A without needing to login to B. So from C I could 'ssh -p 22222 [public IP of B]' and I would get the login prompt for A. I am using debian and shorewall and I have a basic understanding of how things work. I have tried various combinations of REDIRECT and DNAT rules, but haven't had any luck. I have tried using the same port (22222) and a different port (forwarding 22223 from C to 22222 on localhost). Any ideas? Cheers, Ben

  Read the article

• is there any Open Source solution for Failover of incoming Traffic?

  - by sahil

  Hi, We have two ISP... and both ISP's Ip Nat with same Webserver IP, i want failover for incoming traffic , is there any open source solution? can i do it by making two name server , one for each ISP? ... I am not sure but as per my knowledge primary and secondary name server will reply in round robin method till they are live , once any name server will be unreachable then only another will be reply...so if i am right then i think i can do incoming failover by making two name server in my office... Waiting for your valuable response... Thanking you, Sahil

  Read the article

• How to configure QoS on home router

  - by Joril

  I have a USR9105 router and I'd like to configure its QoS to prioritize web traffic (browser) over everything else (e.g. torrents). I'm confused by its interface though: "IP precedence" allows selecting a number from 0 to 7, while "IP type of service" can be one of "Normal Service", "Minimize cost", "Maximize reliability", "Maximize throughput" and "Minimize delay". How should I set it up? Is QoS the wrong solution to avoiding torrents slowing down browsing to a crawl? Should I set up a proxy and traffic shaping instead?

  Read the article

• How to configure QoS on home router

  - by Joril

  I have a USR9105 router and I'd like to configure its QoS to prioritize web traffic (browser) over everything else (e.g. torrents). I'm confused by its interface though: "IP precedence" allows selecting a number from 0 to 7, while "IP type of service" can be one of "Normal Service", "Minimize cost", "Maximize reliability", "Maximize throughput" and "Minimize delay". How should I set it up? Is QoS the wrong solution to avoiding torrents slowing down browsing to a crawl? Should I set up a proxy and traffic shaping instead?

  Read the article

• How can I troubleshoot Virtualbox port forwarding from Windows guest to OSX host not working?

  - by joe larson

  There are a plethora of questions about virtual box port forwarding problems but none with my specific details. I have a Windows install living in Virtual Box, hosted within OSX. I've got several webservers running on localhost on different ports within the Windows install. I cannot for the life of me get port forwarding to work so I can access those webservers from OSX. My settings look like this (yes I have a NAT adapter): And in my vbox configuration file the relavent portion looks like this: <NAT> <DNS pass-domain="true" use-proxy="false" use-host-resolver="false"/> <Alias logging="false" proxy-only="false" use-same-ports="false"/> <Forwarding name="RLPWeb" proto="1" hostport="7084" guestip="127.0.0.1" guestport="7084"/> <Forwarding name="UtilWeb" proto="1" hostport="4040" guestip="127.0.0.1" guestport="4040"/> <Forwarding name="WCARLP" proto="1" hostport="8084" guestip="127.0.0.1" guestport="8084"/> <Forwarding name="WCAUtil" proto="1" hostport="4848" guestip="127.0.0.1" guestport="4848"/> </NAT> I've turned off the Windows firewall to ensure it is not interfering, and I am not running a firewall on OSX. Anyway, when I attempt to go to for example http://127.0.0.1:4040/ on any of my OSX browsers, it will eventually time out. The log file for this VM shows that it is correctly reading the settings and implying it's doing the right thing here: 00:00:08.286 NAT: set redirect TCP host port 4848 => guest port 4848 @ 127.0.0.1 00:00:08.286 NAT: set redirect TCP host port 8084 => guest port 8084 @ 127.0.0.1 00:00:08.286 NAT: set redirect TCP host port 4040 => guest port 4040 @ 127.0.0.1 00:00:08.286 NAT: set redirect TCP host port 7084 => guest port 7084 @ 127.0.0.1 00:00:08.290 Changing the VM state from 'LOADING' to 'SUSPENDED'. 00:00:08.290 Changing the VM state from 'SUSPENDED' to 'RESUMING'. 00:00:08.290 Changing the VM state from 'RESUMING' to 'RUNNING'. 00:00:08.337 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=000000012017d000 w=1834 h=929 bpp=32 cbLine=0x1CA8, flags=0x1 00:00:09.139 AIOMgr: Host limits number of active IO requests to 16. Expect a performance impact. 00:00:13.454 NAT: DHCP offered IP address 10.0.2.15 I've tried setting the Host IP to 127.0.0.1, and I've tried setting Guest IP blank and also 10.0.2.15. None of these seem to help. What else can I look at to troubleshoot this issue? Details of setup: OSX 10.6.8 Windows 7 Professional 64bit VirtualBox 4.1.2

  Read the article

• Trouble subnetting...

  - by ???

  I have to learn how to subnet by hand for a test. And I'm having real problems doing it. I keep getting stuck. Here's an example: 138.248.184.17/18 - IP 255.255.192.0 - Subnet Mask 192 = 1100 0000 in binary And I know 184 in the IP address is the "octet of interest". OK I get that far...and then I'm lost. I know I need to set the network bits of 192(I think?) to all 0 for the network ID and then to all 1 for the broadcast ID. Problem is how do I know which part of 11000000 is network and which part is host?

  Read the article

• Snow Leopard can see Windows shares in Finder but can't connect

  - by Randy Miller

  I have an iMac with the latest version of Snow Leopard on it. I have a NAS drive and a Windows machine that both show up in the Finder's 'Shared' section. However, if I click on them, Finder says "Connection Failed". Clicking on 'Connect As...' gives an error dialog that says "The server 'blah' may not exist or it is unavailable at this time." Points of interest: All machines are receiving their IP/DNS info from the router using DHCP. I have a Mac Mini on the same network that connects to the NAS drive and windows machine perfectly with no config (i.e. worked out of the box). Both Macs are on the same version of Snow Leopard. There is no password required to access the NAS share. I've never setup a WINS server on any machines and all machines are using 'workgroup' by default. I've tried putting "workgroup" in the Mac's workgroup entry and have tried leaving it blank, neither solves the problem. Here are some things I have tried: Finder-Connect To Server: smb:///share. This works, but by name does not. Terminal-mount_smbfs //@/share share. This also works by ip, but not be name, resulting in "mount_smbfs: server connection failed: No route to host". If I put the IP address of the NAS in the WINS server entry in the Mac's network setup, I can connect by name. It obviously seems to be a name resolution error, but I can't figure out why. The only thing that has changed since it used to work is that I got a new router that now gives out DHCP (all machines are dhcp clients) addresses of 192.168.x.x, but used to be 10.0.x.x. I've grep'd through everything that might have saved that old address, but can't find anything. It's also worth noting that the second Mac (the one that connects successfully) was added to the network after the router change. Please let me know if there are additional points of information needed to troubleshoot this further. Thanks, Randy

  Read the article

• Local Area Connection in Slacware 13

  - by asdasd

  I have windows xp and slackware 13 on one computer, and the ISP provided me a new modem. There was manual how to configure it, so i start the web browser and typed it's ip address 192.168.1.1 and the web interface of the modem appeared so i logged in, that was easy. But under slackware, i don't know how to enter in the modem config / web interface. I type in 192.168.1.1 but it's not working. Here's the output of ifconfig eth0 : eth0 Link encap:Ethernet HWaddr 00:a1:b0:01:18:28 inet addr:169.254.73.8 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 Memory:febff400-febff4ff How can i log in into the modem from linux, i.e. find it's assigned ip under slackware ? Thank you.

  Read the article

• CNAME records query

  - by user223346

  I have a control panel with Enta which lets me mess with my DNS settings. So i have added a CNAME record to point to an IP address. Assume my website is called: www.example.com I have added a CNAME like this: subdomain.example.com -> This works fine. But now i wish to add another CNAME for the following to point to the same IP: www.subdomain.example.com This is proving to be not possible as it says i cant add "." in the name when i try to create the record? Any help?

  Read the article

• Implementing a form of port knocking + Phone Factor = 2 Factor auth for RDP?

  - by jshin47

  I have been looking into how to secure a publicly-available RDP endpoint and want to implement our two-factor authentication RADIUS server, PhoneFactor. I would like to implement the following process: User opens up web app in browser In web app, user enters username + password, initiates RADIUS auth Phone factor calls user to complete auth Once user is authenticated, port 3389 is opened on user's IP on pfSense firewall. After some amount of time, firewall rule is removed for that IP I would like to know the following: Is this a typical setup? If it is a bad idea, please explain why. If it is possible, are there any packages that assist with this? Specifically, the third step, where the appropriate firewall rule would need to be added... Edit: I am aware of TS Web Gateway, but I want the users to be able to use the traditional RDP client...

  Read the article

• KVM Guest not reachable from host

  - by Paul

  Hello, I'm running Ubuntu server 9.10, installed KVM etc. Created the bridge network following instructions on help.ubuntu.com/community/KVM/Networking Created a windows 2008 guest using virt-install command line (using virt-manager GUI from a remote Ubuntu desktop would not let me select the ISO location). I can however use a remote virt-manager to connect to the guest and complete the windows install. Within windows 2008 I changed the IP address but cannot ping from outside world. The bridge network appears fine - I'm not sure what else to look at! Here is the interfaces file: The loopback network interface auto lo iface lo inet loopback The primary network interface auto eth0 iface eth0 inet manual # auto br0 iface br0 inet static address 60.234.64.50 netmask 255.255.255.248 network 60.234.0.0 broadcast 60.234.0.255 gateway 60.234.64.49 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 auto eth1 iface eth1 inet static address 192.168.12.2 netmask 255.255.255.0 broadcast 192.168.12.255 The ip of the windows server is 60.234.64.52 What else should I check? Regards Paul.

  Read the article

• lacp, cicso 3550, 3560, help with configuration

  - by Flamewires

  Hey all this is a repost from a question I asked on the cisco forums but never got a useful reply. Hey I'm trying to convert the FreeBSD servers at work to dual-gig lagg links from regular gigabit links. Our production servers are on a 3560. I have a small test environment on a 3550. I have achieved fail-over, but am having troubles achieving the speed increase. All servers are running gig intel (em) cards. The configs for the servers are: BSDServer: #!/bin/sh #bring up both interfaces ifconfig em0 up media 1000baseTX mediaopt full-duplex ifconfig em1 up media 1000baseTX mediaopt full-duplex #create the lagg interface ifconfig lagg0 create #set lagg0's protocol to lacp, add both cards to the interface, #and assign it em1's ip/netmask ifconfig lagg0 laggproto lacp laggport em0 laggport em1 ***.***.***.*** netmask 255.255.255.0 The switches are configured as follows: #clear out old junk no int Po1 default int range GigabitEthernet 0/15 - 16 # config ports interface range GigabitEthernet 0/15 - 16 description lagg-test switchport duplex full speed 1000 switchport access vlan 192 spanning-tree portfast channel-group 1 mode active channel-protocol lacp **** switchport trunk encapsulation dot1q **** no shutdown exit interface Port-channel 1 description lagginterface switchport access vlan 192 exit port-channel load-balance src-mac end obviously change 1000's to 100's and GigabitEthernet to FastEthernet for the 3550's config, as that switch has 100Mbit speed ports. With this config on the 3550, I get failover and 92Mbits/sec speed on both links, simultaneously, connecting to 2 hosts.(tested with iperf) Success. However this is only with the "switchport trunk encapsulation dot1q" line. First, I do not understand why I need this, I thought it was only for connecting switches. Is there some other setting which this turns on that is actually responsible for the speed increase? Second, This config does not work on the 3560. I get failover, but not the speed increase. Speeds drop from gig/sec to 500Mbit/sec when I make 2 simultaneous connections to the server with or without the encapsulation line. I should mention that both switches are using source-mac load balancing. In my test I am using Iperf. I have the server(lagg box) setup as the server(iperf -s), and the client computers are client(iperf -c server-ip-address), so the source mac(and IP) are different for both connections. Any ideas/corrections/questions would be helpful, as the gig switches are what I actually need the lagg links on. Ask if you need more information.

  Read the article

• Trouble with Debian Lenny and Sphinx

  - by Ando

  I've very basic understanding of linux systems, but I've a server which was setup a while ago to host some web apps. Recently I decided to test out and implement Sphinx but unfortunately I cant get the install to work. I'm running a Debian Lenny distro and when I try to install sphinx it says - checking MySQL include files... configure: error: missing include files. ****************************************************************************** ERROR: cannot find MySQL include files. Check that you do have MySQL include files installed. The package name is typically 'mysql-devel'. If include files are installed on your system, but you are still getting this message, you should do one of the following: 1) either specify includes location explicitly, using --with-mysql-includes; 2) or specify MySQL installation root location explicitly, using --with-mysql; 3) or make sure that the path to 'mysql_config' program is listed in your PATH environment variable. To disable MySQL support, use --without-mysql option. ****************************************************************************** I do have mysql 5.1 installed but I can't find the include files, AND one more thing.. I read around the net that I probably need libmysqlclient15-dev but when I try to install that using apt-get i receive the following error. The following packages were automatically installed and are no longer required: libxcb-aux0 libts-0.0-0 libxcb-atom1 ttf-dejavu-extra hunspell-en-us g++-4.3 libmysql++3 libnspr4-0d libdirectfb-1.0-0 libxcb-event1 libasound2 libstdc++6-4.3-dev libhunspell-1.2-0 ttf-dejavu libmozjs2d conkeror-spawn-process-helper libnss3-1d Use 'apt-get autoremove' to remove them. The following NEW packages will be installed: libmysqlclient15-dev 0 upgraded, 1 newly installed, 0 to remove and 276 not upgraded. Need to get 7590 kB of archives. After this operation, 26.3 MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libmysqlclient15-dev Install these packages without verification [y/N]? Y Err http://ftp.us.debian.org/debian/ lenny/main libmysqlclient15-dev amd64 5.0.51a-24+lenny5 404 Not Found [IP: 35.9.37.225 80] Err http://security.debian.org/ lenny/updates/main libmysqlclient15-dev amd64 5.0.51a-24+lenny5 404 Not Found [IP: 149.20.20.6 80] Failed to fetch http://security.debian.org/pool/updates/main/m/mysql-dfsg-5.0/libmysqlclient15-dev_5.0.51a-24+lenny5_amd64.deb 404 Not Found [IP: 149.20.20.6 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Can you help me out by suggesting how to install the required packages and run the Sphinx.

  Read the article

• Receive emails on Amazon EC2 Server

  - by Kartik

  I just got started with an EC2 instance and got my mail sending limit removed, allowing me to send emails from my instance. But due to lack of experience, I have no clue on how to enable receiving emails send to me on that server. The instance has an elastic IP and I have a domain name with an A record pointing to that IP. I cant seem to find better documentation on what steps need to be taken so if someone sends an email to [email protected] it either actually receives it or simply forwards it to my personal email. I know that it involves using postfix but cant find a guide to properly configure it after the installation. Thanks

  Read the article

• Icinga notifications are being marked as spam when sent to my mailbox

  - by user784637

  I'm using gmail and my domain is foo.com About half the notifications from my icinga server, [email protected] go to my spam folder for [email protected] Received-SPF: fail (google.com: domain of [email protected] does not designate <ip6> as permitted sender) client-ip=<ip6>; Authentication-Results: mx.google.com; spf=hardfail (google.com: domain of [email protected] does not designate <ip6> as permitted sender) [email protected] Is my current SPF record set up to allow my icinga server with the ip <ip4> and <ip6> to send email from the domain foo.com? ;; ANSWER SECTION: foo.com. 300 IN TXT "v=spf1 ip4:<ip4> ip6:<ip6> -all"

  Read the article

• Accessing through VPN, which internet connection would be used

  - by Sriram

  I've a data card which has a limit of 2 GB up/download traffic per month. I've an office internet line which has an unlimited up/download. I've successfully connected to VPN using my data card and by changing certain configurations like DNS etc., have also been able to use my office line for internet (verified by doing a IP check - returns the static IP of our office). Now to my question - is it just a NAT which is happening or am I actually using my office line for all communication. Which one would reflect the usage/trace. The data card usage log at this moment does not reflect any usage (which is confusing since the VPN is over the data card connection). Further more (theoretically), would the net be any faster if my office line is let us say 8Mbps and the data card is 512kbps by doing this as against directly connecting the internet using the data card.

  Read the article

< Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >