Search Results

Search found 9286 results on 372 pages for 'transfer speed'.

Page 299/372 | < Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >

• AT&T Upload Filtering?

  - by xpda

  Using an AT&T DSL, I cannot ftp upload or ftp download a few files of a large 1500 set. The problem is the file name. I can change a few characters of the file name, and they upload fine. I can change the filenames from upper to lower case and they upload fine. If I change back to the original filename, it will not upload again. When it doesn't upload, it starts, transfers about 5% of a 5-10 meg file, and then times out. I have uploaded one of the files under a different name, changed the name back to the original, and it will not download via ftp. It will download onto a browser, and it will ftp download just fine with a different name. It just will not download with ftp. I have reproduced this uploading to three different servers on 1and1 and Amazon EC2. When I try it on a non-AT&T ISP client, it works OK. Here is a file that did not upload until I had renamed it. (I have changed it back to the original name): "http://xpda.com/nautnew/11302 STOVER POINT TO PORT BROWNSVILLE SIDE A.png" This problem is unrelated to connection, speed, and file content. Only things I can see that makes a difference are the file name and ATT DSL. Does ATT have some kind of ftp file filtering? Is there anything else that could cause this behavior?

  Read the article

• Windows 7 misses keystrokes from internal keyboard after hibernation (on Acer Aspire 5820)

  - by ron

  I face a very strange symptom on my Acer Aspire laptop (with the factory default Win7 install and divers. Windows update running). After waking the computer from hibernation, it is a pain to type, since on average 5-10 keypresses are missing per 100 presses, using the laptop's keyboard. Steps to reproduce: 1) Power off 2) Power on, wait for system to become usable 3) Open notepad, for 5 times do hit 10x the same character. This gives a similar pattern of 50 chars total: xxxxxxxxxxyyyyyyyyyyaaaaaaaaaassssssssssdddddddddd 4) Optionally repeat. Everything is fine this far. 5) Hibernate. 6) Power on and resume. 7) Repeat steps 3)-4). This time approximately 3-5 character will be missing from each 50 characters. What I ruled out: putting to Sleep or just Locking and resuming from there does not cause problem battery / AC usage does not matter net connection does not matter running processes seem to be the same before and after hibernation key press speed doesn't really matter. For the test I use a nominal 3-5 strokes/second beat. plugging in an external USB keyboard works fine, but the built-in one still misbehaves What could be the problem? How could I diagnose if the keypresses arrive in, but get swallowed at some point? (maybe some nasty keyboard handler hook misbehaves?). Update: It seems that pushing the PowerSmart button and toggling to power saving state fixes the problem. Also, toggling it again back to the original state keeps it fixed. So this may be a fine workaround, but is not a conforming solution.

  Read the article

• Which Cardbus/PCMCIA -> USB card works with external hard drive?

  - by Carl

  I have an HT-Link Cardbus/PCMCIA USB 2.0 2-port card (NEC / 32-bit). My external hard drive w/USB adapter won't work with it, and it will work plugged directly into a USB port on a different laptop. (My USB ports got fried.) I got the card off E-Bay. My MP3 player works plugged into that card. The drivers for the card say "Known limitations: High Speed Isochronus, USB Composite Devices." (No other details provided.) I don't know if the hard drive adapter is "isochronous" or "composite." I've read there are problems with too little power being supplied to the drive. The cable to the drive has two USB plugs on one end, and it doesn't make any difference if I plug both of them into the Cardbus card. What card should I get? I see many different brands on E-Bay. I need one that supplies sufficient power for an external hard drive, and doesn't have any "known limitations" in the way.

  Read the article

• MacMini transmit rate stuck at 11, every other device can connect at full 54Mbit/s?

  - by chum of chance

  I have a MacMini circa 2007 that's getting very low transmit rates via wifi, 8-11. I have other devices that are getting full 54, including a MacBook Air. With everything else off, the MacMini doesn't want to seem to go any faster. Since it has been previously connected to ethernet its entire life, I was wondering if there were some settings I can change to speed up the connection. Option-clicking the network icon gives this read out: PHY Mode: 802.11g Channel: 1 (2.4 Ghz) Security: WPA2 Personal RSSI: -73 Transmit Rate: 11 My new MacBook Air has the following readout: PHY Mode: 802.11n Channel: 1 (2.4 Ghz) Security: WPA2 Personal RSSI: -66 Transmit Rate: 79 Both have full bars and the wireless router is in the same room to eliminate any obstructions from the equation. Could the MacMini be connecting at an older protocol, like 802.11b and be reporting erroneously that it is connected at 802.11g? This would explain why I haven't seen a transmit rate above 11. Any further trouble shooting I can try before buying a new USB 802.11n device? The WiFi router is a DLink DIR-615. I can see other devices, and none, even the other g connected devices, are getting below 30-40 MBit/s. What's going on here?

  Read the article

• Need recommendation: which USB card (PCMCIA) works with external hard drive?

  - by Carl

  I have an HT-Link Cardbus/PCMCIA USB 2.0 2-port card (NEC / 32-bit). My external hard drive w/USB adapter won't work with it, and it will work plugged directly into a USB port on a different laptop. (My USB ports got fried.) I got the card off E-Bay. My MP3 player works plugged into that card. The drivers for the card say "Known limitations: High Speed Isochronus, USB Composite Devices." (No other details provided.) I don't know if the hard drive adapter is "isochronous" or "composite." I've read there are problems with too little power being supplied to the drive. The cable to the drive has two USB plugs on one end, and it doesn't make any difference if I plug both of them into the Cardbus card. What card should I get? I see many different brands on E-Bay. I need one that supplies sufficient power for an external hard drive, and doesn't have any "known limitations" in the way.

  Read the article

• Network using only switches

  - by mschultz

  So I'm not a network guy - but here's what I want to do - I have an existing network using wifi, which I like, and which is used to connect several computers to the internet. It is headed up by a router, which is in another part of the building. Three of those computers are in my office. All three have gigabit wired ethernet. I have a gigabit switch. Here's what I want to do: Build a 2nd network, out of just that switch, which allows all 3 computers to connect to each other (just to each other is fine, for this purpose, they need no internet). I have a distributed computing task (rendering high-quality fractal artwork, as it were), that requires the best connection speed to all 3 computers. I want them to be able to "talk to each other" as quickly as possible, with the fewest dropped packets (the dataflow over this network will be quite high). So how do I do this. I'm not a networking guy at all - I tried connecting them all, and nobody got an IP address (which I assume is because nobody is running a DNS server?). What all do I need to do to make this work? PS - two are running windows, one is running ubuntu.

  Read the article

• How many VPS do I need for my website? [duplicate]

  - by michael

  This question already has an answer here: How do you do load testing and capacity planning for web sites? 3 answers I made a website which aims at simulating a trading market. There are a list of prices and corresponding volumes that people want to purchase. Users can purchase at any price any time. My website retrieves the prices and volumes from my database every 2 seconds (I have to update the user's browser frequently to allow them to see the current market). Users' database INSERT query can be sent any time if they purchase. I used ajax to post or get data from my database (sometimes nested ajax calls). So, every 2 seconds, each user will send or retrieve data by using more than 20 database queries (in order to show a users the current prices and volumes). Also, I may have 200 users at a time. I was not using VPS before, and I got banned because of using too much CPU resources on my host. Now, I've purchased VPS*2 from a hosting servers. I have: CPU Speed: 2000 Mhz Memory: 2048 MB Disk Space: 20000 MB Bandwidth: 2000 GB Connection: 40 Mb/s Dedicated IP's 2 IP's Is this enough for my 200 users? Also, which VPS OS is suitable for me? Thank you.

  Read the article

• Mysql: Working With 192 Trillion Records... (Yes, 192 Trillion)

  - by Sarah

  Here's the question... Considering 192 trillion records, what should my considerations be? My main concern is speed. Here's the table... CREATE TABLE `ref` ( `id` INTEGER(13) AUTO_INCREMENT DEFAULT NOT NULL, `rel_id` INTEGER(13) NOT NULL, `p1` INTEGER(13) NOT NULL, `p2` INTEGER(13) DEFAULT NULL, `p3` INTEGER(13) DEFAULT NULL, `s` INTEGER(13) NOT NULL, `p4` INTEGER(13) DEFAULT NULL, `p5` INTEGER(13) DEFAULT NULL, `p6` INTEGER(13) DEFAULT NULL, PRIMARY KEY (`id`), KEY (`s`), KEY (`rel_id`), KEY (`p3`), KEY (`p4`) ); Here's the queries... SELECT id, s FROM ref WHERE red_id="$rel_id" AND p3="$p3" AND p4="$p4" SELECT rel_id, p1, p2, p3, p4, p5, p6 FROM ref WHERE id="$id" INSERT INTO rel (rel_id, p1, p2, p3, s, p4, p5, p6) VALUES ("$rel_id", "$p1", "$p2", "$p3", "$s", "$p4", "$p5", "$p6") Here's some notes... The SELECT's will be done much more frequently than the INSERT. However, occasionally I want to add a few hundred records at a time. Load-wise, there will be nothing for hours then maybe a few thousand queries all at once. Don't think I can normalize any more (need the p values in a combination) The database as a whole is very relational. This will be the largest table by far (next largest is about 900k) UPDATE (08/11/2010) Interestingly, I've been given a second option... Instead of 192 trillion I could store 2.6*10^16 (15 zeros, meaning 26 Quadrillion)... But in this second option I would only need to store one bigint(18) as the index in a table. That's it - just the one column. So I would just be checking for the existence of a value. Occasionally adding records, never deleting them. So that makes me think there must be a better solution then mysql for simply storing numbers... Given this second option, should I take it or stick with the first... [edit] Just got news of some testing that's been done - 100 million rows with this setup returns the query in 0.0004 seconds [/edit]

  Read the article

• The endpoint reference (EPR) for the Operation not found is

  - by Denise Wu

  I have been struggling with the following error the last couple of days can you please help! I generated my server and client code using the wsdl2java tool from a wsdl 2.0 file. When invoking the webservice I am getting the following error: org.apache.axis2.AxisFault: The endpoint reference (EPR) for the Operation not found is /axis2/services/MyService/authentication/?username=Denise345&password=xxxxx and the WSA Action = null My service is displayed on the axis2 webpage with all available methods. Here is the output from TcpMon ============== Listen Port: 8090 Target Host: 127.0.0.1 Target Port: 8080 ==== Request ==== GET /axis2/services/MyService/authentication/?username=Denise345&password=xxxxx HTTP/1.1 Content-Type: application/x-www-form-urlencoded; charset=UTF-8 SOAPAction: "" User-Agent: Axis2 Host: 127.0.0.1:8090 ==== Response ==== HTTP/1.1 500 Internal Server Error Server: Apache-Coyote/1.1 Content-Type: application/xml;charset=UTF-8 Transfer-Encoding: chunked Date: Thu, 12 May 2011 15:53:20 GMT Connection: close 12b <soapenv:Reason xmlns:soapenv="http://www.w3.org/2003/05/soap-envelope"> <soapenv:Text xml:lang="en-US">The endpoint reference (EPR) for the Operation not found is /axis2/services/MyService/authentication/?username=Denise345&password=xxxxx and the WSA Action = null</soapenv:Text></soapenv:Reason> 0 ============== I am using: * axis2-1.5.4 * Tomcat 7.0.8 * wsdl 2.0 file Please help!

  Read the article

• perl Client-SSL-Warning: Peer certificate not verified

  - by Jeremey

  I am having trouble with a perl screenscraper to an HTTPS site. In debugging, I ran the following: print $res->headers_as_string; and in the output, I have the following line: Client-SSL-Warning: Peer certificate not verified Is there a way I can auto-accept this certificate, or is that not the problem? #!/usr/bin/perl use LWP::UserAgent; use Crypt::SSLeay::CTX; use Crypt::SSLeay::Conn; use Crypt::SSLeay::X509; use LWP::Simple qw(get); my $ua = LWP::UserAgent->new; my $req = HTTP::Request->new(GET => 'https://vzw-cat.sun4.lightsurf.net/vzwcampaignadmin/'); my $res = $ua->request($req); print $res->headers_as_string; output: Cache-Control: no-cache Connection: close Date: Tue, 01 Jun 2010 19:28:08 GMT Pragma: No-cache Server: Apache Content-Type: text/html Expires: Wed, 31 Dec 1969 16:00:00 PST Client-Date: Tue, 01 Jun 2010 19:28:09 GMT Client-Peer: 64.152.68.114:443 Client-Response-Num: 1 Client-SSL-Cert-Issuer: /O=VeriSign Trust Network/OU=VeriSign, Inc./OU=VeriSign International Server CA - Class 3/OU=www.verisign.com/CPS Incorp.by Ref. LIABILITY LTD.(c)97 VeriSign Client-SSL-Cert-Subject: /C=US/ST=Massachusetts/L=Boston/O=verizon wireless/OU=TERMS OF USE AT WWW.VERISIGN.COM/RPA (C)00/CN=PSMSADMIN.VZW.COM Client-SSL-Cipher: DHE-RSA-AES256-SHA Client-SSL-Warning: Peer certificate not verified Client-Transfer-Encoding: chunked Link: <css/vtext_style.css>; rel="stylesheet"; type="text/css" Set-Cookie: JSESSIONID=DE6C99EA2F3DD1D4DF31456B94F16C90.vz3; Path=/vzwcampaignadmin; Secure Title: Verizon Wireless - Campaign Administrator

  Read the article

• C# Can I return HttpWebResponse result to iframe - Uses Digest authentication

  - by chadsxe

  I am trying to figure out a way to display a cross-domain web page that uses Digest Authentication. My initial thought was to make a web request and return the entire page source. I currently have no issues with authenticating and getting a response but I am not sure how to properly return the needed data. // Create a request for the URL. WebRequest request = WebRequest.Create("http://some-url/cgi/image.php?type=live"); // Set the credentials. request.Credentials = new NetworkCredential(username, password); // Get the response. HttpWebResponse response = (HttpWebResponse)request.GetResponse(); // Get the stream containing content returned by the server. Stream dataStream = response.GetResponseStream(); // Open the stream using a StreamReader for easy access. StreamReader reader = new StreamReader(dataStream); // Read the content. string responseFromServer = reader.ReadToEnd(); // Clean up the streams and the response. reader.Close(); dataStream.Close(); response.Close(); return responseFromServer; My problems are currently... responseFromServer is not returning the entire source of the page. I.E. missing body and head tags The data is encoded improperly in responseFromServer. I believe this has something to do with the transfer encoding being of the type chunked. Further more... I am not entirely sure if this is even possible. If it matters, this is being done in ASP.NET MVC 4 C#. Thanks, Chad

  Read the article

• Instantiate an .aspx that is an embedded resource of an assembly

  - by asbjornu

  I have an ASP.NET (MVC) application in which I would like to load WebForms .aspx files that are embedded as resources in 3rd party assemblies. The reason I want to do this is to make a sort of "plug-in" system where a .dll file can be dropped in a folder and then picked up at runtime to provide additional functionality to the base application. I've gotten the plugin system to work (I'm using MEF) with plugins written in ASP.NET MVC (Views and Controllers), but for plain old ASP.NET (Pages), I've got myself into a bit of a problem. For the execution of the embedded .aspx file (which, in the usual WebForm way Inherits="My.BasePage") I've created a custom VirtualPathProvider, ResourceFile ControllerFactory and PageController. Within the PageController I've overridden the Execute(RequestContext) method and within it I'm trying to compile the .aspx with BuildManager.CreateInstanceFromVirtualPath(virtualPath, type). When doing this, I get the error message "Could not load type 'My.BasePage'", even though I'm giving the BuildManager the System.Type of My.BasePage in the call to CreateInstanceFromVirtualPath. I seem to be stuck at this point. I've tried to Server.Transfer() to the custom VirtualPathProvider handled URL to the same .aspx file, but that fails with the same error message. How can I help BuildManager find out where My.BasePage is defined and how come the Type requiredBaseType parameter of CreateInstanceFromVirtualPath seems to be ignored? I've tried to call BuildManager.AddReferencedAssembly(), but that only fails with "This method can only be called during the application's pre-start initialization stage". MSDN says: "The method must be called during the Application_PreStartInit stage of the application", but I have no such event in my HttpApplication object and find absolutely zero information about it on the internet. Either way, I don't want to be calling BuildManager.AddReferencedAssembly() in or before the Application_Start event, since that makes me have to recycle the whole application to be able to add new plugins to the system. Does anyone have any clues? Any other ideas on how I can "execute" an .aspx file that is embedded as a resource within an assembly through reflection? Can I for instance pre-compile the .aspx file within the same assembly as the base Page class it inherits?

  Read the article

• Handle URI hacking gracefully in ASP.NET

  - by asbjornu

  I've written an application that handles most exceptions gracefully, with the page's design intact and a pretty error message. My application catches them all in the Page_Error event and there adds the exception to HttpContext.Curent.Context.Items and then does a Server.Transfer to an Error.aspx page. I find this to be the only viable solution in ASP.NET as there seems to be no other way to do it in a centralized and generic manner. I also handle the Application_Error and there I do some inspection on the exception that occurred to find out if I can handle it gracefully or not. Exceptions I've found I can handle gracefully are such that are thrown after someone hacking the URI to contain characters the .NET framework considers dangerous or basically just illegal at the file system level. Such URIs can look like e.g.: http://exmample.com/"illegal" http://example.com/illegal"/ http://example.com/illegal / (notice the space before the slash at the end of the last URI). I'd like these URIs to respond with a "404 Not Found" and a friendly message as well as not causing any error report to be sent to avoid DDOS attack vectors and such. I have, however, not found an elegant way to catch these types of errors. What I do now is inspect the exception.TargetSite.Name property, and if it's equal to CheckInvalidPathChars, ValidatePath or CheckSuspiciousPhysicalPath, I consider it a "path validation exception" and respond with a 404. This seems like a hack, though. First, the list of method names is probably not complete in any way and second, there's the possibility that these method names gets replaced or renamed down the line which will cause my code to break. Does anyone have an idea how I can handle this less hard-coded and much more future-proof way? PS: I'm using System.Web.Routing in my application to have clean and sensible URIs, if that is of any importance to any given solution.

  Read the article

• Android, sending XML via HTTP POST (SOAP)

  - by Intosia

  Hi, I would like to invoke a webservice via Android. I need to POST some XML to a URL via HTTP. I found this snipped for sending a POST, but i dont know how to include/add the XML data itself. public void postData() { // Create a new HttpClient and Post Header HttpClient httpclient = new DefaultHttpClient(); HttpPost httppost = new HttpPost("http://10.10.4.35:53011/"); try { // Add your data List<NameValuePair> nameValuePairs = new ArrayList<NameValuePair>(2); nameValuePairs.add(new BasicNameValuePair("Content-Type", "application/soap+xml")); httppost.setEntity(new UrlEncodedFormEntity(nameValuePairs)); // Where/how to add the XML data? // Execute HTTP Post Request HttpResponse response = httpclient.execute(httppost); } catch (ClientProtocolException e) { // TODO Auto-generated catch block } catch (IOException e) { // TODO Auto-generated catch block } } This is the complete POST message that i need to imitate: POST /a8103e90-f1e3-11dd-bfdb-8b1fcff1a110 HTTP/1.1 Host: 10.10.4.35:53011 Content-Type: application/soap+xml Content-Length: 602 <?xml version='1.0' encoding='UTF-8' ?> <s12:Envelope xmlns:s12="http://www.w3.org/2003/05/soap-envelope" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing"> <s12:Header> <wsa:MessageID>urn:uuid:fc061d40-3d63-11df-bfba-62764ccc0e48</wsa:MessageID> <wsa:Action>http://schemas.xmlsoap.org/ws/2004/09/transfer/Get</wsa:Action> <wsa:To>urn:uuid:a8103e90-f1e3-11dd-bfdb-8b1fcff1a110</wsa:To> <wsa:ReplyTo> <wsa:Address>http://schemas.xmlsoap.org/ws/2004/08/addressing/role/anonymous</wsa:Address> </wsa:ReplyTo> </s12:Header> <s12:Body /> </s12:Envelope>

  Read the article

• Display Simple Web Page In My Application Using Blackberry BrowserField

  - by ankit

  Hello All, What I am trying to do is display a simple web page in my application (no javascript,cookies or any scripting and not trying to detect any events such as mouse click etc.). I am using the code below and right now all I get is empty screen .. I know that the application is accessing the internet (the data transfer arrow flashes in the top right corner) but not sure why its not rendering. The code I am using is : HttpConnectionFactory factory = new HttpConnectionFactory("www.google.ca",HttpConnectionFactory.TRANSPORT_WIFI | HttpConnectionFactory.TRANSPORT_WAP2 | HttpConnectionFactory.TRANSPORT_DIRECT_TCP); while(true) { try { HttpConnection connection = factory.getNextConnection(); try { BrowserContent bc = RenderingSession.getNewInstance().getBrowserContent(connection,null,0); Field f = bc.getDisplayableContent(); add(f); } catch(RenderingException e) { //Log the error or store it for displaying to //the end user if no transports succeed System.out.println("error with rendering page"); } } catch(NoMoreTransportsException e) { //There are no more transports to attempt //Dialog.alert( "Unable to perform request" ); //Note you should never //attempt network activity on the event thread System.out.println("no more transport"); break; } } Some points to note: Im using the http-connection-factory class from www.versatilemonkey.com only becuase they have impelemented the abstract httpConnection class. If someone can also point me on how to implement my own that would be great. I am using '0' for the flags for getBrowserContent function. I looked through the rimn documentation and could not find an explanation for them. Any help would be greatly appreciated. Thanks, ankit

  Read the article

• Transferring data from Salesforce using Apex Data Loader to Oracle

  - by Barret

  While attempting to transfer data from Salesforce using Apex Data Loader to Oracle Keep getting the following error: 26937 [databaseAccountExtract] FATAL com.salesforce.dataloader.dao.database.Data baseContext - Error getting value for SQL parameter: nkey__c. Please make sure that the value exists in the configuration file or is passed in. Database conf iguration: insertAccount. The database-conf.xml has the following beans: <bean id="insertAccount" class="com.salesforce.dataloader.dao.database.DatabaseConfig" singleton="true"> <property name="sqlConfig" ref="insertAccountSql"/> <property name="dataSource" ref="dbDataSource"/> </bean> <bean id="insertAccountSql" class="com.salesforce.dataloader.dao.database.SqlConfig" singleton="true"> <property name="sqlString"> <value> INSERT INTO VANTROPO.SF_ACCOUNTCHANNEL (nkey__c) VALUES (@nkey__c@) </value> </property> <property name="sqlParams"> <map> <entry key="nkey__c" value="java.lang.String"/> </map> </property> </bean> The SDL (mapping file) has the following values: # Account Insert Mapping values for query from Salesforce (left) and insert/update to Oracle (right) # SalesforceFieldName=OracleFieldName nkey__c=NKEY__C Any help appreciated.

  Read the article

• EDM -> POCO -> WCF (.NET4) But transferring Collections causes IsReadOnly set to TRUE

  - by Gary B

  Ok, this may sound a little 'unorthodox', but...using VS2010 and the new POCO t4 template for Entity Framework (http://tinyurl.com/y8wnkt2), I can generate nice POCO's. I can then use these POCO's (as DTO's) in a WCF service essentially going from EDM all the way through to the client. Kinda what this guys is doing (http://tinyurl.com/yb4bslv), except everything is generated automatically. I understand that an entity and a DTO 'should' be different, but in this case, I'm handling client and server, and there's some real advantages to having the DTO in the model and automatically generated. My problem is, that when I transfer an entity that has a relationship, the client generated collection (ICollection) has the read-only value set, so I can't manipulate that relationship. For example, retrieving an existing Order, I can't add a product to the Products collection client-side...the Products collection is read-only. I would prefer to do a bunch of client side 'order-editing' and then send the updated order back rather than making dozens of server round trips (eg AddProductToOrder(product)). I'd also prefer not to have a bunch of thunking between Entity and DTO. So all-in-all this looks good to me...except for the read-only part. Is there a solution, or is this too much against the SOA grain?

  Read the article

• MVP, WinForms - how to avoid bloated view, presenter and presentation model

  - by MatteS

  When implementing MVP pattern in winforms I often find bloated view interfaces with too many properties, setters and getters. An easy example with be a view with 3 buttons and 7 textboxes, all having value, enabled and visible properties exposed from the view. Adding validation results for this, and you could easily end up with an interface with 40ish properties. Using the Presentation Model, there'll be a model with the same number of properties aswell. How do you easily sync the view and the presentation model without having bloated presenter logic that pass all the values back and forth? (With that 80ish line presenter code, imagine with the presenter test that mocks the model and view will look like..160ish lines of code just to mock that transfer.) Is there any framework to handle this without resorting to winforms databinding? (you might want to use different views than a winforms view. According to some, this sync should be the presenters job..) Would you use AutoMapper? Maybe im asking the wrong questions, but it seems to me MVP easily gets bloated without some good solution here..

  Read the article

• Setting up an efficient and effective development process

  - by christopher-mccann

  I am in the midst of setting up the development environment (PHP/MySQL) for my start-up. We use three sets of servers: LIVE - the servers which provide the actual application TEST - providing a testing version before it is actually released DEV - the development servers The development servers run SVN with each developer checking out their local copy. At the end of each day completed fixes are checked in and then we use Hudson to automate our build process and then transfer it over to TEST. We then check the application still functions correctly using a tester and then if everything is fine move it to LIVE. I am happy with this process but I do have two questions: How would you recommend we do local testing - as each developer adds new pages or changes functionality I want them to be able to test what they are doing. Would you just setup local Apache and a local database and have them test locally on their own machine? How would you recommend dealing with data layer changes? Is there anything else you would recommend doing to really make our development process as easy and efficient as possible? Thanks in advance

  Read the article

• Suggestions for doing async I/O with Task Parallel Library

  - by anelson

  I have some high performance file transfer code which I wrote in C# using the Async Programming Model (APM) idiom (eg, BeginRead/EndRead). This code reads a file from a local disk and writes it to a socket. For best performance on modern hardware, it's important to keep more than one outstanding I/O operation in flight whenever possible. Thus, I post several BeginRead operations on the file, then when one completes, I call a BeginSend on the socket, and when that completes I do another BeginRead on the file. The details are a bit more complicated than that but at the high level that's the idea. I've got the APM-based code working, but it's very hard to follow and probably has subtle concurrency bugs. I'd love to use TPL for this instead. I figured Task.Factory.FromAsync would just about do it, but there's a catch. All of the I/O samples I've seen (most particularly the StreamExtensions class in the Parallel Extensions Extras) assume one read followed by one write. This won't perform the way I need. I can't use something simple like Parallel.ForEach or the Extras extension Task.Factory.Iterate because the async I/O tasks don't spend much time on a worker thread, so Parallel just starts up another task, resulting in potentially dozens or hundreds of pending I/O operations; way too much! You can work around that by Waiting on your tasks, but that causes creation of an event handle (a kernel object), and a blocking wait on a task wait handle, which ties up a worker thread. My APM-based implementation avoids both of those things. I've been playing around with different ways to keep multiple read/write operations in flight, and I've managed to do so using continuations that call a method that creates another task, but it feels awkward, and definitely doesn't feel like idiomatic TPL. Has anyone else grappled with an issue like this with the TPL? Any suggestions?

  Read the article

• Need help with artificial neural network

  - by deckard cain

  I have an input data for neural network that consists of 2 vectors with 200 elements, that i got from some program for generating signals. So it is actually 2x200 input to my nnet. As target data, i have one 1x200 vector that i also got from the same program. That is my training data set. I gather as much of those sets as i want so i transfer them to matlab and save them as, for example, set1, set2,.... When i am creating neural net, using newfit function (backropagation algorithm and everyhting else is set by default because i am kind of unexperianced with neural nets so i will have to experiment) i'm creating it using set1 only for example. Then, when i am to train neural net i train it for set1 then load set2 and train for it and so on. so its like this function net = create_fit_net(inputs,targets) numHiddenNeurons = 20; net = newfit(inputs,targets,numHiddenNeurons); net=train(net,inputs,targets); load set2; net=train(net,inputs,targets); load set3; net=train(net,inputs,targets); load set4; net=train(net,inputs,targets); i am using 4 sets of data here and all sets have variables of same name and size. My quesion is, am i doing this the right way, because, when doing simulation in some other m file, i am getting bad results, and every time i get different results. Does it matter if i create network with one set and then train with others too, and does it matter what set do i use to train network 1st? Also, i am confused about the amount of neurons to use (im using in the example 20 but actually i tried 1, 10, 30, 50, 100 200 and even 300 and i get nothing). If you have any suggestions, i'd be glad to take them into consideration. Any help is welcome. thanks in advance

  Read the article

• SQLite table does not exist exception for existing SQLite database (and table)

  - by SK9

  I've followed the instructions given here for introducing an existing SQLite database to your Android app. When I query the table "android_metadata" this is fine. But when I run a similar query on my own table "words" (which has _id for primary integer key) I get a table does not exist exception and the app crashes. Why is that? Code: Cursor c = myDatabase.query("android_metadata", null, null, null, null, null, null, null); works but Cursor c = myDatabase.query("words", null, null, null, null, null, null, null); returns a table does not exist exception. This is how I'm creating the database (the references to paths and filenames are correct): private void copyDatabase() throws IOException{ //Open local db as the input stream InputStream myInput = mContext.getAssets().open(DB_NAME); //Path to the just created empty db String outFileName = DB_PATH + DB_NAME; //Open the empty db as the output stream OutputStream myOutput = new FileOutputStream(outFileName); //Transfer bytes from the inputfile to the outputfile byte[] buffer = new byte[1024]; int length; while ((length = myInput.read(buffer))>0){ myOutput.write(buffer, 0, length); } //Close the streams myOutput.flush(); myOutput.close(); myInput.close(); } (Note: To my eyes, the table is there. I'm looking right at it in my SQLite browser.)

  Read the article

• WCF net.tcp bindings, message formats and security questions

  - by RemotecUk

  Hi, sorry for the stupid questions but there are just some things about WCF I cant get my head around. Would be greatful for some advice on the following.... At a very basic level is it correct that WCF uses either Binary (Net.Tcp), HTTP or MSMQ to transfer my message on the wire? However is it true that in all cases, regardless of how the data is transferred the message itself in in the SOAP format with headers and a body? So its a sort of XML message that is transmitted in either HTTP/S or in a binary format. Is Net.Tcp a good choice for my client server app - its similar to a messenger app in that the clients are all remote users on the other side of the firewall to my server. Most things I am reading are telling to use WS* and HTTP. Is Net.Tcp secured by standard and without certificates? - that is - people cannot listen on the wire and decode the data thats going to and from. Is it possible to send a username and password using net.tcp and without an installed certificate? If so I presume I can hook this up to my membership provider and authenticate access to each method on my service contract implementation. I presume that with username and password security, the proxy is initialised with the username and password and that this information is is sent with every request. Then my membership provider will be invoked for each method call and do whatever it needs to do to get the authorisation for the method. Sorry for the dump of questions but would be great to know if Im thinking the right way about how WCF works. Thanks.

  Read the article

• Debuging CUDA kernels called from .NET code in VS2008, emulation mode

  - by Danny Varod

  CUDA has an option to compile code in emulation mode, which is supported in the .rules file they provide. I have C# .NET 3.5 SP1 code that calls a native dll, using DllImport, the native dll is compiled via VS2008 using nvcc and its function is to transfer memory from and to CUDA and to invoke CUDA kernels. When the CUDA kernels are correct, everything runs fine, but when there is a bug, I can only step in to the code until the title of the kernels and see the parameters they receive. (I enabled debugging native code in the startup-project's debug options.) I have tried compiling with emulation mode, however I get the CUDA error "mixed device execution" when calling the CUDA memcopy host--device. I tried switching the alloc+dealloc+memcopy with their equivalent non-CUDA versions, but then the same error occurs when invoking the kernels. What did I do wrong in my attempt to using the debug-emulation mode? P.S. I tried this on Vista x64 SP1 + VS2008, with the same solution complied in both x86 and x64, neither worked in emulation mode, both worked in non-emulation mode.

  Read the article

• ASP.NET Setting Culture with InitializeCulture

  - by Helen

  I have a website with three domains .com, .de and .it Each domain needs to default to the local language/culture of the country. I have created a base page and added an InitializeCulture Protected Overrides Sub InitializeCulture() Dim url As System.Uri = Request.Url Dim hostname As String = url.Host.ToString() Dim SelectedLanguage As String If HttpContext.Current.Profile("PreferredCulture").ToString Is Nothing Then Select Case hostname Case "www.domain.de" SelectedLanguage = "de" Thread.CurrentThread.CurrentUICulture = New CultureInfo(SelectedLanguage) Thread.CurrentThread.CurrentCulture = CultureInfo.CreateSpecificCulture(SelectedLanguage) Case "www.domain.it" SelectedLanguage = "it" Thread.CurrentThread.CurrentUICulture = New CultureInfo(SelectedLanguage) Thread.CurrentThread.CurrentCulture = CultureInfo.CreateSpecificCulture(SelectedLanguage) Case Else SelectedLanguage = "en" Thread.CurrentThread.CurrentUICulture = New CultureInfo(SelectedLanguage) Thread.CurrentThread.CurrentCulture = CultureInfo.CreateSpecificCulture(SelectedLanguage) End Select End If End Sub This is fine. The problem now occurs because we also want three language selection buttons on the home page so that the user can override the domain language. So on my Default.asp.vb we have three button events like this... Protected Sub langEnglish_Click(ByVal sender As Object, ByVal e As System.Web.UI.ImageClickEventArgs) Handles langEnglish.Click Dim SelectedLanguage As String = "en" 'Save selected user language in profile HttpContext.Current.Profile.SetPropertyValue("PreferredCulture", SelectedLanguage) 'Force re-initialization of the page to fire InitializeCulture() Context.Server.Transfer(Context.Request.Path) End Sub But of course the InititalizeCulture then overrides whatever button selection has been made. Is there any way that the InitialCulture can check whether a button click has occurred and if so skip the routine? Any advice would be greatly appreciated, thanks.

  Read the article

< Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >