Search Results

Search found 29133 results on 1166 pages for 'week number'.

Page 299/1166 | < Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >

• How to Solve N-Queens Problem in Scheme?

  - by Philip

  Hi, I'm stuck on the extended exercise 28.2 of How to Design Programs. Here is the link to the question: http://www.htdp.org/2003-09-26/Book/curriculum-Z-H-35.html#node_chap_28 I used a vector of true or false values to represent the board instead of using a list. This is what I've got which doesn't work: #lang Scheme (define-struct posn (i j)) ;takes in a position in i, j form and a board and returns a natural number that represents the position in index form ;example for board xxx ; xxx ; xxx ;(0, 1) - 1 ;(2, 1) - 7 (define (board-ref a-posn a-board) (+ (* (sqrt (vector-length a-board)) (posn-i a-posn)) (posn-j a-posn))) ;reverse of the above function ;1 - (0, 1) ;7 - (2, 1) (define (get-posn n a-board) (local ((define board-length (sqrt (vector-length a-board)))) (make-posn (floor (/ n board-length)) (remainder n board-length)))) ;determines if posn1 threatens posn2 ;true if they are on the same row/column/diagonal (define (threatened? posn1 posn2) (cond ((= (posn-i posn1) (posn-i posn2)) #t) ((= (posn-j posn1) (posn-j posn2)) #t) ((= (abs (- (posn-i posn1) (posn-i posn2))) (abs (- (posn-j posn1) (posn-j posn2)))) #t) (else #f))) ;returns a list of positions that are not threatened or occupied by queens ;basically any position with the value true (define (get-available-posn a-board) (local ((define (get-ava index) (cond ((= index (vector-length a-board)) '()) ((vector-ref a-board index) (cons index (get-ava (add1 index)))) (else (get-ava (add1 index)))))) (get-ava 0))) ;consume a position in the form of a natural number and a board ;returns a board after placing a queen on the position of the board (define (place n a-board) (local ((define (foo x) (cond ((not (board-ref (get-posn x a-board) a-board)) #f) ((threatened? (get-posn x a-board) (get-posn n a-board)) #f) (else #t)))) (build-vector (vector-length a-board) foo))) ;consume a list of positions in the form of natural number and consumes a board ;returns a list of boards after placing queens on each of the positions on the board (define (place/list alop a-board) (cond ((empty? alop) '()) (else (cons (place (first alop) a-board) (place/list (rest alop) a-board))))) ;returns a possible board after placing n queens on a-board ;returns false if impossible (define (placement n a-board) (cond ((zero? n) a-board) (else (local ((define available-posn (get-available-posn a-board))) (cond ((empty? available-posn) #f) (else (or (placement (sub1 n) (place (first available-posn) a-board)) (placement/list (sub1 n) (place/list (rest available-posn) a-board))))))))) ;returns a possible board after placing n queens on a list of boards ;returns false if all the boards are not valid (define (placement/list n boards) (cond ((empty? boards) #f) ((zero? n) (first boards)) ((not (boolean? (placement n (first boards)))) (first boards)) (else (placement/list n (rest boards)))))

  Read the article

• How can I read individual lines of a CSV file into a string array, to then be selectively displayed

  - by Ryan

  I need your help, guys! :| I've got myself a CSV file with the following contents: 1,The Compact,1.8GHz,1024MB,160GB,440 2,The Medium,2.4GHz,1024MB,180GB,500 3,The Workhorse,2.4GHz,2048MB,220GB,650 It's a list of computer systems, basically, that the user can purchase. I need to read this file, line-by-line, into an array. Let's call this array csvline(). The first line of the text file would stored in csvline(0). Line two would be stored in csvline(1). And so on. (I've started with zero because that's where VB starts its arrays). A drop-down list would then enable the user to select 1, 2 or 3 (or however many lines/systems are stored in the file). Upon selecting a number - say, 1 - csvline(0) would be displayed inside a textbox (textbox1, let's say). If 2 was selected, csvline(1) would be displayed, and so on. It's not the formatting I need help with, though; that's the easy part. I just need someone to help teach me how to read a CSV file line-by-line, putting each line into a string array - csvlines(count) - then increment count by one so that the next line is read into another slot. So far, I've been able to paste the numbers of each system into an combobox: Using csvfileparser As New Microsoft.VisualBasic.FileIO.TextFieldParser _ ("F:\folder\programname\programname\bin\Debug\systems.csv") Dim csvalue As String() csvfileparser.TextFieldType = Microsoft.VisualBasic.FileIO.FieldType.Delimited csvfileparser.Delimiters = New String() {","} While Not csvfileparser.EndOfData csvalue = csvfileparser.ReadFields() combobox1.Items.Add(String.Format("{1}{0}", _ Environment.NewLine, _ csvalue(0))) End While End Using But this only selects individual values. I need to figure out how selecting one of these numbers in the combobox can trigger textbox1 to be appended with just that line (I can handle the formatting, using the string.format stuff). If I try to do this using csvalue = csvtranslator.ReadLine , I get the following error message: "Error 1 Value of type 'String' cannot be converted to '1-dimensional array of String'." If I then put it as an array, ie: csvalue() = csvtranslator.ReadLine , I then get a different error message: "Error 1 Number of indices is less than the number of dimensions of the indexed array." What's the knack, guys? I've spent hours trying to figure this out. Please go easy on me - and keep any responses ultra-simple for my newbie brain - I'm very new to all this programming malarkey and just starting out! :)

  Read the article

• Mars Mania and the Google Maps APIs!

  Mars Mania and the Google Maps APIs! Interested in learning how to use the Google Maps API and WebGL to create a dynamic terrain lighting map of the surface of Mars? Or how about using the Street View API and a bit of ImageMagick to view the high resolution panoramic images from the Curiosity Rover? Since Curiosity's touchdown, Brendan Kenny and Paul Saxman have been infected with a bit of Mars Mania. Stop by this week's Google Maps Developers Office Hours to see how they've been seeking therapy through productive programming. From: GoogleDevelopers Views: 1146 28 ratings Time: 34:15 More in Science & Technology

  Read the article

• Getting float values out of PostgreSQL

  - by skymander

  I am having trouble retrieving float/real values out of PostgreSQL. For example, I would like to store: 123456789123456, the retrieve that exact same number with a select statement. table tbl (num real) insert into tbl(num) values('123456789123456'); As it is now, if I "select num from tbl" the result is "1.23457e+14" If I run "select CAST(num AS numeric) as num from tbl" the result is 123457000000000 If I run "select CAST(num AS float) as num from tbl" the result is 123456788103168 (where did this number come from) How on earth can I select the value and get "123456789123456" as the result? Thanks so much in advance

  Read the article

• C++ Little Wonders: The C++11 auto keyword redux

  - by James Michael Hare

  I’ve decided to create a sub-series of my Little Wonders posts to focus on C++.  Just like their C# counterparts, these posts will focus on those features of the C++ language that can help improve code by making it easier to write and maintain.  The index of the C# Little Wonders can be found here. This has been a busy week with a rollout of some new website features here at my work, so I don’t have a big post for this week.  But I wanted to write something up, and since lately I’ve been renewing my C++ skills in a separate project, it seemed like a good opportunity to start a C++ Little Wonders series.  Most of my development work still tends to focus on C#, but it was great to get back into the saddle and renew my C++ knowledge.  Today I’m going to focus on a new feature in C++11 (formerly known as C++0x, which is a major move forward in the C++ language standard).  While this small keyword can seem so trivial, I feel it is a big step forward in improving readability in C++ programs. The auto keyword If you’ve worked on C++ for a long time, you probably have some passing familiarity with the old auto keyword as one of those rarely used C++ keywords that was almost never used because it was the default. That is, in the code below (before C++11): 1: int foo() 2: { 3: // automatic variables (allocated and deallocated on stack) 4: int x; 5: auto int y; 6:  7: // static variables (retain their value across calls) 8: static int z; 9:  10: return 0; 11: } The variable x is assumed to be auto because that is the default, thus it is unnecessary to specify it explicitly as in the declaration of y below that.  Basically, an auto variable is one that is allocated and de-allocated on the stack automatically.  Contrast this to static variables, that are allocated statically and exist across the lifetime of the program. Because auto was so rarely (if ever) used since it is the norm, they decided to remove it for this purpose and give it new meaning in C++11.  The new meaning of auto: implicit typing Now, if your compiler supports C++ 11 (or at least a good subset of C++11 or 0x) you can take advantage of type inference in C++.  For those of you from the C# world, this means that the auto keyword in C++ now behaves a lot like the var keyword in C#! For example, many of us have had to declare those massive type declarations for an iterator before.  Let’s say we have a std::map of std::string to int which will map names to ages: 1: std::map<std::string, int> myMap; And then let’s say we want to find the age of a given person: 1: // Egad that's a long type... 2: std::map<std::string, int>::const_iterator pos = myMap.find(targetName); Notice that big ugly type definition to declare variable pos?  Sure, we could shorten this by creating a typedef of our specific map type if we wanted, but now with the auto keyword there’s no need: 1: // much shorter! 2: auto pos = myMap.find(targetName); The auto now tells the compiler to determine what type pos should be based on what it’s being assigned to.  This is not dynamic typing, it still determines the type as if it were explicitly declared and once declared that type cannot be changed.  That is, this is invalid: 1: // x is type int 2: auto x = 42; 3:  4: // can't assign string to int 5: x = "Hello"; Once the compiler determines x is type int it is exactly as if we typed int x = 42; instead, so don’t' confuse it with dynamic typing, it’s still very type-safe. An interesting feature of the auto keyword is that you can modify the inferred type: 1: // declare method that returns int* 2: int* GetPointer(); 3:  4: // p1 is int*, auto inferred type is int 5: auto *p1 = GetPointer(); 6:  7: // ps is int*, auto inferred type is int* 8: auto p2 = GetPointer(); Notice in both of these cases, p1 and p2 are determined to be int* but in each case the inferred type was different.  because we declared p1 as auto *p1 and GetPointer() returns int*, it inferred the type int was needed to complete the declaration.  In the second case, however, we declared p2 as auto p2 which means the inferred type was int*.  Ultimately, this make p1 and p2 the same type, but which type is inferred makes a difference, if you are chaining multiple inferred declarations together.  In these cases, the inferred type of each must match the first: 1: // Type inferred is int 2: // p1 is int* 3: // p2 is int 4: // p3 is int& 5: auto *p1 = GetPointer(), p2 = 42, &p3 = p2; Note that this works because the inferred type was int, if the inferred type was int* instead: 1: // syntax error, p1 was inferred to be int* so p2 and p3 don't make sense 2: auto p1 = GetPointer(), p2 = 42, &p3 = p2; You could also use const or static to modify the inferred type: 1: // inferred type is an int, theAnswer is a const int 2: const auto theAnswer = 42; 3:  4: // inferred type is double, Pi is a static double 5: static auto Pi = 3.1415927; Thus in the examples above it inferred the types int and double respectively, which were then modified to const and static. Summary The auto keyword has gotten new life in C++11 to allow you to infer the type of a variable from it’s initialization.  This simple little keyword can be used to cut down large declarations for complex types into a much more readable form, where appropriate.   Technorati Tags: C++, C++11, Little Wonders, auto

  Read the article

• Setting the position within a spinner

  - by eric

  Good Afternoon, I have a spinner array containing 3 spinners. Each spinner is populated via a res string array. Each array contains the numbers 1-100. When the activity starts each spinner contains a string array of 1-100 and when you click on a spinner the first choice is 1. Say a user picks 25 on the first spinner. I'd like the 2nd spinner to show 25 as the starting point for scrolling when the spinner is clicked but not fire the spinner. The 2nd spinner would still contain the array 1-100 though so a user could scroll down to a lessor number if the wanted to. I've tried using setSelection but that causes the 2nd spinner to fire causing undesirable effects (an edit box is populated with the 2nd number even though the user hasn't clicked the 2nd spinner). I would like the 2nd spinner to just show 25 as the starting point. How do I do this?

  Read the article

• Win32 API Question

  - by Lalit_M

  We have developed a ASP.NET web application and has implemented a custom authentication solution using active directory as the credentials store. Our front end application uses a normal login form to capture the user name and password and leverages the Win32 LogonUser method to authenticate the user’s credentials. When we are calling the LogonUser method, we are using the LOGON32_LOGON_NETWORK as the logon type. The issue we have found is that user profile folders are being created under the C:\Users folder of the web server. The folder seems to be created when a new user who has never logged on before is logging in for the first time. As the number of new users logging into the application grows, disk space is shrinking due to the large number of new user folders getting created. Has anyone seen this behavior with the Win32 LogonUser method? Does anyone know how to disable this behavior?

  Read the article

• Control JSON Serialization format of a custom type in .NET

  - by mrjoltcola

  I have a PhoneNumber class that stores a normalized string, and I've defined implicit operators for string <- Phone to simplify treatment of the PhoneNumber as a string. I've also overridden the ToString() method to always return the cleaned version of the number (no hyphens or parentheses or spaces). In any MVC.NET code where I explicitly display the number, I can explicitly call phone.Format(). The problem here is serializing an entity that has a PhoneNumber to JSON; JavaScriptSerializer serializes it as [object Object]. I want to serialize it as a string in (555)555-5555 format. I've looked at writing a custom JavaScriptConverter, but JavaScriptConverter.Serialize() method returns a dictionary of name-value pairs. I don't want PhoneNumber to be treated as an object with fields, I want to simply serialize it as a string.

  Read the article

• Max TCP Connections to a machine

  - by A9S6

  I am creating a Windows Service in .NET to which N number of client can connect. The service starts a TCP listener and accepts the client connections. The problem I am facing is that I can only open 10 connections to this service. The listener::AcceptTcpClient() method accepts only 10 connection and throws an exception for 11th one. The client application uses the System.Net.Sockets.TcpClient class and the service is using System.Net.Sockets.TcpListener class. This is the exception that I am getting when I try to make a number of connections in a for loop to this service (after the 10th connection is made): "Unable to read data from Transport connection: An exsting connection was forcibly closed by remote host"

  Read the article

• Formatting an indented list in CSS

  - by Colen

  Hi, Let's say I have a list, with an arbitrary number of indentation levels, like so: Item Item Item Item Item Item Item Item Item Item Item If I'm displaying this list in an HTML document, how can I use CSS to handle the indentation? There might be an arbitrary number of indentation levels (although in practice there isn't going to be more than 5 or so). I don't want to create an "indent1" class that indents 10 pixels, an "indent2" class that indents 20 pixels, etc - that's clumsy. Is it possible to create a general rule that will indent by a certain distance based on an attribute value, or the position of an element in the hierarchy?

  Read the article

• New Article on OTN: Tips for Securing an Oracle Linux Environment

  - by Lenz Grimmer

  Some time ago, we published Tips for Hardening an Oracle Linux Server on the Oracle Technology Network. This article focused on hardening an Oracle Linux system right after the initial installation, exploring administrative approaches that help to minimize vulnerabilities. This week we issued a second part,Tips for Securing an Oracle Linux Environment, which focuses on the operational part: detecting intrusion attempts, auditing and keeping systems up-to date and protected. If you manage Oracle Linux systems in your environment, check out these articles for some invaluable hints and suggestions on how to improve and maintain security of these servers!

  Read the article

• Custom types in OpenCL kernel

  - by Studer

  Is it possible to use custom types in OpenCL kernel like gmp types (mpz_t, mpq_t, …) ? To have something like that (this kernel doesn't build just because of #include <gmp.h>) : #include <gmp.h> __kernel square( __global mpz_t* input, __global mpz_t number, __global int* output, const unsigned int count) { int i = get_global_id(0); if(i < count) output[i] = mpz_divisible_p(number,input[i]); } Or maybe does OpenCL already have types that can handle large numbers ?

  Read the article

• Ubuntu 12.10 - Windows 8 Dual Boot (Tried boot-repair) - Dual OS option not showing

  - by Anand Danani

  as title says, this is my first time trying ubuntu. I have been trying since last week with continuous googling and searching, but still no luck. I had win8 x64 installed before, then tried installing Ubuntu 12.10 desktop (dual OS option) I tried like 10 times already, everytime it's showing installation complete, but when i restarted and boot from my HDD, dual boot option is not showing, directly to win8 startup I installed win8 on C before. I had a 104gb free drive to install linux to (it's installed already.. but the dual boot option is now showing) In case it helps, Laptop Model : Acer Aspire 4752 Intel Core i3, 2.30GHz Ram 4GB 64 Bit OS - Windows 8 Pro with Media Center This is the url i got from the boot-repair http://paste.ubuntu.com/1407018/ (it's not win vista, thou it seems showing so in the link) Thanks a lot.. Any help will be greatly appreciated. I really want to get my Linux installed. Ken D

  Read the article

• Hard Disk DRDY error: is it a crash

  - by pranjal

  I am using IBM Thinkpad, 1.7GHz, 512 RAM with Linux Mint 9 installed. I have two partitions in addition to root. One of the partitions became read-only yesterday, after which I rebooted my system. It is extremely slow along with DRDY Error : Is my Hard disk crashed ? Error Log while booting. Differences between boot sector and its backup. failed command : READ DMA BMDMA : stat 0X25 ata 1.00 : status : { DRDY ERR } ata 1.00 : status :{ UNC } Buffer I/O error on logical device, logical block 65467 smartctl output for the partition: mint mint # smartctl -a /dev/sda1 smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: TOSHIBA MK4026GAX RoHS Serial Number: X5LY1623T Firmware Version: PA107E User Capacity: 40,007,761,920 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Feb 17 06:48:25 2011 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 153) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 310 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3968 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 40 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 7257 10 Spin_Retry_Count 0x0033 179 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3484 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 489 193 Load_Cycle_Count 0x0032 064 064 000 Old_age Always - 367150 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Lifetime Min/Max 14/57) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 33 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 82 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 101 222 Loaded_Hours 0x0032 085 085 000 Old_age Always - 6146 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 227 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 2371 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2371 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:10.061 READ DMA f8 00 00 00 00 00 e0 00 00:03:10.061 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:10.053 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:10.053 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:10.053 READ NATIVE MAX ADDRESS Error 2370 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:03.328 READ DMA f8 00 00 00 00 00 e0 00 00:03:03.327 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:03.320 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:03.319 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:03.319 READ NATIVE MAX ADDRESS Error 2369 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:56.582 READ DMA f8 00 00 00 00 00 e0 00 00:02:56.582 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:56.574 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:56.574 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:56.574 READ NATIVE MAX ADDRESS Error 2368 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:49.809 READ DMA f8 00 00 00 00 00 e0 00 00:02:49.809 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:49.801 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:49.801 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:49.801 READ NATIVE MAX ADDRESS Error 2367 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:43.056 READ DMA f8 00 00 00 00 00 e0 00 00:02:43.056 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:43.048 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:43.048 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:43.047 READ NATIVE MAX ADDRESS SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging Do I need to get a new Hard Disk my PC ?

  Read the article

• Ask the Readers: What’s on Your Geeky Christmas List?

  - by Jason Fitzpatrick

  From tablets to replicas of Tattoine, visions of geeky and technology-loaded gifts surely dance in many of your heads. This week’s question is all about you and the loot you’d love to find in your stocking this year. Whether you’re dreaming of tech goodies like a new ultrabook or ebook reader, or of more geeky pursuits like a Star Trek themed chess set or a tour of Africa to visit abandoned Star Wars sets, we want to hear all about it. Don’t be bashful, hop into the comments and let loose with your wish list; check back on Friday for a What You Said roundup highlighting wishes from the endearing to the extravagant. Our Geek Trivia App for Windows 8 is Now Available Everywhere How To Boot Your Android Phone or Tablet Into Safe Mode HTG Explains: Does Your Android Phone Need an Antivirus?

  Read the article

• Prime Numbers Code Help

  - by andrew

  Hello Everybody, I am suppose to "write a Java program that reads a positive integer n from standard input, then prints out the first n prime number." It's divided into 3 parts. 1st: This function will return true or false according to whether m is prime or composite. The array argument P will contain a sufficient number of primes to do the testing. Specifically, at the time isPrime() is called, array P must contain (at least) all primes p in the range 2 p m . For instance, to test m = 53 for primality, one must do successive trial divisions by 2, 3, 5, and 7. We go no further since 11 53 . Thus a precondition for the function call isPrime(53, P) is that P[0] = 2 , P[1] = 3 , P[2] = 5, and P[3] = 7 . The return value in this case would be true since all these divisions fail. Similarly to test m =143 , one must do trial divisions by 2, 3, 5, 7, and 11 (since 13 143 ). The precondition for the function call isPrime(143, P) is therefore P[0] = 2 , P[1] = 3 , P[2] = 5, P[3] = 7 , and P[4] =11. The return value in this case would be false since 11 divides 143. Function isPrime() should contain a loop that steps through array P, doing trial divisions. This loop should terminate when 2 either a trial division succeeds, in which case false is returned, or until the next prime in P is greater than m , in which case true is returned. Then there is the "main function" • Check that the user supplied exactly one command line argument which can be interpreted as a positive integer n. If the command line argument is not a single positive integer, your program will print a usage message as specified in the examples below, then exit. • Allocate array Primes[] of length n and initialize Primes[0] = 2 . • Enter a loop which will discover subsequent primes and store them as Primes[1] , Primes[2], Primes[3] , ……, Primes[n -1] . This loop should contain an inner loop which walks through successive integers and tests them for primality by calling function isPrime() with appropriate arguments. • Print the contents of array Primes[] to stdout, 10 to a line separated by single spaces. In other words Primes[0] through Primes[9] will go on line 1, Primes[10] though Primes[19] will go on line 2, and so on. Note that if n is not a multiple of 10, then the last line of output will contain fewer than 10 primes. The last function is called "usage" which I am not sure how to execute this! Your program will include a function called Usage() having signature static void Usage() that prints this message to stderr, then exits. Thus your program will contain three functions in all: main(), isPrime(), and Usage(). Each should be preceded by a comment block giving it’s name, a short description of it’s operation, and any necessary preconditions (such as those for isPrime().) And hear is my code, but I am having a bit of a problem and could you guys help me fix it? If I enter the number "5" it gives me the prime numbers which are "6,7,8,9" which doesn't make much sense. import java.util.; import java.io.; import java.lang.*; public class PrimeNumber { static boolean isPrime(int m, int[] P){ int squarert = Math.round( (float)Math.sqrt(m) ); int i = 2; boolean ans=false; while ((i<=squarert) & (ans==false)) { int c= P[i]; if (m%c==0) ans= true; else ans= false; i++; } /* if(ans ==true) ans=false; else ans=true; return ans; } ///****main public static void main(String[] args ) { Scanner in= new Scanner(System.in); int input= in.nextInt(); int i, j; int squarert; boolean ans = false; int userNum; int remander = 0; System.out.println("input: " + input); int[] prime = new int[input]; prime[0]= 2; for(i=1; i ans = isPrime(j,prime); j++;} prime[i] = j; } //prnt prime System.out.println("The first " + input + " prime number(s) are: "); for(int r=0; r }//end of main } Thanks for the help

  Read the article

• Chrome Apps Office Hours: Storage API Deep Dive

  Chrome Apps Office Hours: Storage API Deep Dive Ask and vote for questions at: goo.gl Join us next week as we take a deeper dive into the new storage APIs available to Chrome Packaged Apps. We've invited Eric Bidelman, author of the HTML5 File System API book to join Paul Kinlan, Paul Lewis, Pete LePage and Renato Dias for our weekly Chrome Apps Office Hours in which we will pick apart some of the sample Chrome Apps and explain how we've used the storage APIs and why we made the decisions we did. From: GoogleDevelopers Views: 0 0 ratings Time: 00:00 More in Science & Technology

  Read the article

• Servlet stops working on Tomcat server after some hits or time

  - by nekin

  I have a very strange issue with some of my servlets. Below is my configuration: Folder A has X number of servlets deployed in Tomcat directory Folder B has Y number of servlets deployed in Tomcat directory After certain amount of time or hits to any of the servlets in Folder B, it stops working properly, whereas at same time all servlets of Folder A works fine. I am not able to trace where I am doing mistake. All coding for both folder's servlets is the same, the only difference is they are interacting with different DB's, but it is very simple read only operation with DB though. Any ideas?

  Read the article

• Windows Phone Resources from //BUILD 2013 Conference by Lee Stott

  - by Nikita Polyakov

  Originally posted on: http://geekswithblogs.net/campuskoder/archive/2013/07/02/153320.aspxLee Stott has a great summary blog post with all of the videos from the //BUILD 2013 conference that just happened last week. It’s nice because filtering to this event and finding Windows Phone sessions on Channel9 is not the best and this is a great snap shot of all of the sessions you can view from the conference in one page. Also shows that Microsoft although focused on Windows 8.1 at this event, still had a sizable presence of Windows Phone Developer topics at this event. Read the full blog post here: http://blogs.msdn.com/b/uk_faculty_connection/archive/2013/07/01/build-2013-windows-phone-resources.aspx

  Read the article

• apt-get update mdadm scary warnings

  - by user568829

  Just ran an apt-get update on one of my dedicated servers to be left with a relatively scary warning: Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.26-2-686-bigmem W: mdadm: the array /dev/md/1 with UUID c622dd79:496607cf:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/2 with UUID 24120323:8c54087c:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/6 with UUID eef74de5:9267b2a1:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/5 with UUID 5d45b20c:04d8138f:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. As instructed I inspected the output of /usr/share/mdadm/mkconf and compared with /etc/mdadm/mdadm.conf and they are quite different. Here is the /etc/mdadm/mdadm.conf contents: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays ARRAY /dev/md0 level=raid1 num-devices=2 UUID=b93b0b87:5f7c2c46:0043fca9:4026c400 ARRAY /dev/md1 level=raid1 num-devices=2 UUID=c0fa8842:e214fb1a:fad8a3a2:28f2aabc ARRAY /dev/md2 level=raid1 num-devices=2 UUID=cdc2a9a9:63bbda21:f55e806c:a5371897 ARRAY /dev/md3 level=raid1 num-devices=2 UUID=eca75495:9c9ce18c:d2bac587:f1e79d80 # This file was auto-generated on Wed, 04 Nov 2009 11:32:16 +0100 # by mkconf $Id$ And here is the out put from /usr/share/mdadm/mkconf # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays ARRAY /dev/md1 UUID=c622dd79:496607cf:c230666b:5103eba0 ARRAY /dev/md2 UUID=24120323:8c54087c:c230666b:5103eba0 ARRAY /dev/md5 UUID=5d45b20c:04d8138f:c230666b:5103eba0 ARRAY /dev/md6 UUID=eef74de5:9267b2a1:c230666b:5103eba0 # This configuration was auto-generated on Sat, 25 Feb 2012 13:10:00 +1030 # by mkconf 3.1.4-1+8efb9d1+squeeze1 As I understand it I need to replace the four lines that start with 'ARRAY' in the /etc/mdadm/mdadm.conf file with the different four 'ARRAY' lines from the /usr/share/mdadm/mkconf output. When I did this and then ran update-initramfs -u there were no more warnings. Is what I have done above correct? I am now terrified of rebooting the server for fear it will not reboot and being a remote dedicated server this would certainly mean downtime and possibly would be expensive to get running again. FOLLOW UP (response to question): the output from mount: /dev/md1 on / type ext3 (rw,usrquota,grpquota) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) /dev/md2 on /boot type ext2 (rw) /dev/md5 on /tmp type ext3 (rw) /dev/md6 on /home type ext3 (rw,usrquota,grpquota) mdadm --detail /dev/md0 mdadm: md device /dev/md0 does not appear to be active. mdadm --detail /dev/md1 /dev/md1: Version : 0.90 Creation Time : Sun Aug 14 09:43:08 2011 Raid Level : raid1 Array Size : 31463232 (30.01 GiB 32.22 GB) Used Dev Size : 31463232 (30.01 GiB 32.22 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:03:47 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : c622dd79:496607cf:c230666b:5103eba0 Events : 0.24 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 104320 (101.89 MiB 106.82 MB) Used Dev Size : 104320 (101.89 MiB 106.82 MB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Sat Feb 25 13:20:20 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 24120323:8c54087c:c230666b:5103eba0 Events : 0.30 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 8 18 1 active sync /dev/sdb2 mdadm --detail /dev/md3 mdadm: md device /dev/md3 does not appear to be active. mdadm --detail /dev/md5 /dev/md5: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 2104448 (2.01 GiB 2.15 GB) Used Dev Size : 2104448 (2.01 GiB 2.15 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 5 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:09:03 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 5d45b20c:04d8138f:c230666b:5103eba0 Events : 0.30 Number Major Minor RaidDevice State 0 8 5 0 active sync /dev/sda5 1 8 21 1 active sync /dev/sdb5 mdadm --detail /dev/md6 /dev/md6: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 453659456 (432.64 GiB 464.55 GB) Used Dev Size : 453659456 (432.64 GiB 464.55 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 6 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:10:00 2012 State : active Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : eef74de5:9267b2a1:c230666b:5103eba0 Events : 0.31 Number Major Minor RaidDevice State 0 8 6 0 active sync /dev/sda6 1 8 22 1 active sync /dev/sdb6 FOLLOW UP 2 (response to question): Output from /etc/fstab /dev/md1 / ext3 defaults,usrquota,grpquota 1 1 devpts /dev/pts devpts mode=0620,gid=5 0 0 proc /proc proc defaults 0 0 #usbdevfs /proc/bus/usb usbdevfs noauto 0 0 /dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0 /dev/dvd /media/dvd auto ro,noauto,user,exec 0 0 # # # /dev/md2 /boot ext2 defaults 1 2 /dev/sda3 swap swap pri=42 0 0 /dev/sdb3 swap swap pri=42 0 0 /dev/md5 /tmp ext3 defaults 0 0 /dev/md6 /home ext3 defaults,usrquota,grpquota 1 2

  Read the article

• Figuring out the required MaxReceivedMessageSize in WCF with NetTcpBinding

  - by Flo

  I'm using NetTcpBinding in WCF and i want to send a Stream which does not exceed the size of 1 MB. I have set the MaxReceivedMessageSize to a really high number and that works fine of course. But I am curious: Does setting the MaxReceivedMessageSize to a very hight number have any (negative) impact or would it be useful to set it just above the size I actually want to send/receive? What kind of overhead can I expect when using the NetTcpBinding to transfer a stream? Meaning: when I send a stream of 1 MB, how large does my MaxReceivedMessageSize has to be?

  Read the article

• Microsoft Team Foundation Server 2010 Service Pack 1

  - by javarg

  Last week Microsoft has released the first Service Pack for Team Foundation Server. Several issues have been fixed and included in this patch. Check out the list of fixes here. Cool stuff has been shipped with this new released, such as the expected Project Service Integration. PS: note that these annoying bugs has been fixed: Team Explorer: When you use a Visual Studio 2005 or a Visual Studio 2008 client, you encounter a red "X" on the reporting node of the team explorer. Source Control: You receive the error "System.IO.IOException: Unable to read data from the transport connection: The connection was closed." when you try to download a source

  Read the article

• Who is Jeremiah Owyang?

  - by Michael Hylton

  Q: What’s your current role and what career path brought you here? J.O.: I'm currently a partner and one of the founding team members at Altimeter Group.  I'm currently the Research Director, as well as wear the hat of Industry Analyst. Prior to joining Altimeter, I was an Industry Analyst at Forrester covering Social Computing, and before that, deployed and managed the social media program at Hitachi Data Systems in Santa Clara.  Around that time, I started a career blog called Web Strategy which focused on how companies were using the web to connect with customers --and never looked back. Q: As an industry analyst, what are you focused on these days? J.O.: There are three trends that I'm focused my research on at this time:  1) The Dynamic Customer Journey:  Individuals (both b2c and b2b) are given so many options in their sources of data, channels to choose from and screens to consume them on that we've found that at each given touchpoint there are 75 potential permutations.  Companies that can map this, then deliver information to individuals when they need it will have a competitive advantage and we want to find out who's doing this.  2) One of the sub themes that supports this trend is Social Performance.  Yesterday's social web was disparate engagement of humans, but the next phase will be data driven, and soon new technologies will emerge to help all those that are consuming, publishing, and engaging on the social web to be more efficient with their time through forms of automation.  As you might expect, this comes with upsides and downsides.  3) The Sentient World is our research theme that looks out the furthest as the world around us (even inanimate objects) become 'self aware' and are able to talk back to us via digital devices and beyond.  Big data, internet of things, mobile devices will all be this next set. Q: People cite that the line between work and life is getting more and more blurred. Do you see your personal life influencing your professional work? J.O.: The lines between our work and personal lives are dissolving, and this leads to a greater upside of being always connected and have deeper relationships with those that are not.  It also means a downside of society expectations that we're always around and available for colleagues, customers, and beyond.  In the future, a balance will be sought as we seek to achieve the goals of family, friends, work, and our own personal desires.  All of this is being ironically written at 430 am on a Sunday am.  Q: How can people keep up with what you’re working on? J.O.: A great question, thanks.  There are a few sources of information to find out, I'll lead with the first which is my blog at web-strategist.com.  A few times a week I'll publish my industry insights (hires, trends, forces, funding, M&A, business needs) as well as on twitter where I'll point to all the news that's fit to print @jowyang.  As my research reports go live (we publish them for all to read --called Open Research-- at no cost) they'll emerge on my blog, or checkout the research tab to find out more now.  http://www.web-strategist.com/blog/research/ Q: Recently, you’ve been working with us here at Oracle on something exciting coming up later this week. What’s on the horizon?  J.O.: Absolutely! This coming Thursday, September 13th, I’m doing a webcast with Oracle on “Managing Social Relationships for the Enterprise”. This is going to be a great discussion with Reggie Bradford, Senior Vice President of Product Development at Oracle and Christian Finn, Senior Director of Product Management for Oracle WebCenter. I’m looking forward to a great discussion around all those issues that so many companies are struggling with these days as they realize how much social media is impacting their business. It’s changing the way your customers and employees interact with your brand. Today it’s no longer a matter of when to become a social-enabled enterprise, but how to become a successful one. Q: You’ve been very actively pursued for media interviews and conference and company speaking engagements – anything you’d like to share to give us a sneak peak of what to expect on Thursday’s webcast?  J.O.: Below is a 15 minute video which encapsulates Altimeter’s themes on the Dynamic Customer Journey and the Sentient World. I’m really proud to have taken an active role in the first ever LeWeb outside of Paris. This one, which was featured in downtown London across the street from Westminster Abbey was sold out. If you’ve not heard of LeWeb, this is a global Internet conference hosted by Loic and Geraldine Le Meur, a power couple that stem from Paris but are also living in Silicon Valley, this is one of my favorite conferences to connect with brands, technology innovators, investors and friends. Altimeter was able to play a minor role in suggesting the theme for the event “Faster Than Real Time” which stems off previous LeWebs that focused on the “Real time web”. In this radical state, companies are able to anticipate the needs of their customers by using data, technology, and devices and deliver meaningful experiences before customers even know they need it. I explore two of three of Altimeter’s research themes, the Dynamic Customer Journey, and the Sentient World in my speech, but due to time, did not focus on Adaptive Organization.

  Read the article

• Implementing google dashboard type interface in asp.net

  - by Sam_Cogan

  I'm looking at implementing a Google IG type dashboard in a .net app. There are a number of options I've found to do this, and i'm trying to establish what is going to be the best to use, in terms of speed, versatility etc. So far the options I am looking at are either to use asp.net webparts and .net Ajax, this would make it quicker to build, but I'm concerned this is going to make the application bulky and slow, or using JQuery, and either .net MVC or Webforms, to custom build an interface. Does anyone have any thoughts on what the best option may be, or any options I may have missed? All I want to do here is to allow users to customise a dashboard with a number of components (which will be user controls). I do also have access to Telerik controls, but I'm not sure if they would be any use here.

  Read the article

• Python: How to read huge text file into memory

  - by asmaier

  I'm using Python 2.6 on a Mac Mini with 1GB RAM. I want to read in a huge text file $ ls -l links.csv; file links.csv; tail links.csv -rw-r--r-- 1 user user 469904280 30 Nov 22:42 links.csv links.csv: ASCII text, with CRLF line terminators 4757187,59883 4757187,99822 4757187,66546 4757187,638452 4757187,4627959 4757187,312826 4757187,6143 4757187,6141 4757187,3081726 4757187,58197 So each line in the file consists of a tuple of two comma separated integer values. I want to read in the whole file and sort it according to the second column. I know, that I could do the sorting without reading the whole file into memory. But I thought for a file of 500MB I should still be able to do it in memory since I have 1GB available. However when I try to read in the file, Python seems to allocate a lot more memory than is needed by the file on disk. So even with 1GB of RAM I'm not able to read in the 500MB file into memory. My Python code for reading the file and printing some information about the memory consumption is: #!/usr/bin/python # -*- coding: utf-8 -*- import sys infile=open("links.csv", "r") edges=[] count=0 #count the total number of lines in the file for line in infile: count=count+1 total=count print "Total number of lines: ",total infile.seek(0) count=0 for line in infile: edge=tuple(map(int,line.strip().split(","))) edges.append(edge) count=count+1 # for every million lines print memory consumption if count%1000000==0: print "Position: ", edge print "Read ",float(count)/float(total)*100,"%." mem=sys.getsizeof(edges) for edge in edges: mem=mem+sys.getsizeof(edge) for node in edge: mem=mem+sys.getsizeof(node) print "Memory (Bytes): ", mem The output I got was: Total number of lines: 30609720 Position: (9745, 2994) Read 3.26693612356 %. Memory (Bytes): 64348736 Position: (38857, 103574) Read 6.53387224712 %. Memory (Bytes): 128816320 Position: (83609, 63498) Read 9.80080837067 %. Memory (Bytes): 192553000 Position: (139692, 1078610) Read 13.0677444942 %. Memory (Bytes): 257873392 Position: (205067, 153705) Read 16.3346806178 %. Memory (Bytes): 320107588 Position: (283371, 253064) Read 19.6016167413 %. Memory (Bytes): 385448716 Position: (354601, 377328) Read 22.8685528649 %. Memory (Bytes): 448629828 Position: (441109, 3024112) Read 26.1354889885 %. Memory (Bytes): 512208580 Already after reading only 25% of the 500MB file, Python consumes 500MB. So it seem that storing the content of the file as a list of tuples of ints is not very memory efficient. Is there a better way to do it, so that I can read in my 500MB file into my 1GB of memory?

  Read the article

< Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >