Search Results

Search found 9381 results on 376 pages for 'wireless driver'.

Page 308/376 | < Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >

• Pandaboard crash on startup or freeze after minutes

  - by Meach

  I just received my Pandaboard ES (rev B) and I am having trouble after installing ubuntu-omap4-addons. Once I copied the image ubuntu-12.04-preinstalled-desktop-armhf+omap4.img on my sd card and boot the pandaboard with it, I run the following commands: sudo add-apt-repository ppa:tiomap-dev/release sudo apt-get update sudo apt-get dist-upgrade sudo apt-get install ubuntu-omap4-extras At the end of the installation of ubuntu-omap4-extras, Ubuntu tells me that a problem occurs when the console displays: ldconfig deferred processing now taking place Clicking on "report the problem" tell me that the problem concerns pvr-omap4-dkms. I read somewhere that this can happen and it is better to reinstall pvr-omap4-dkms. Which I am doing by running: sudo apt-get install --reinstall pvr-omap4-dkms I reboot. Then the board has sometimes difficulties to start Ubuntu: it freezes during the loading page, only action I can do is unplugging the board to start it again. Some other times, Ubuntu load successfully but then freeze at another random time, in the range 20 - 40 minutes. I searched on internet for similar bug and found this: https://bugs.launchpad.net/ubuntu/+source/linux-ti-omap4/+bug/971091 So I typed this in: update-rc.d ondemand disable apt-get -y install cpufrequtils echo 'ENABLE="true" GOVERNOR="performance" MAX_SPEED="0" MIN_SPEED="0"' > /etc/default/cpufrequtils cpufreq-set -r -g performance reboot But it doesn't seems to fix the bug. Another detail: on startup, before the loading screen of Ubuntu (when there is the two penguins displayed :)), it shows this: [0.297271] CPU1: Unknown IPI message 0x1 [0.308990] omap_hwmod: mcpdm: _wait_target_ready error: -16 [0.354705] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [0.354766] omap_hwmod_mux_init: Could not allocate device mux entry [2.107086] thermal_get_slope:Getting slope is not supported for domain gpu [2.107116] thermal_get_offset:Getting offset is not supported for domain gpu [2.107299] stm_fw: vendor driver stm_ti1.0 registered [8.725555] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0! debug=0 Any idea what can be wrong? I am not that good with Ubuntu so any help will be appreciated. Cheers! Meach

  Read the article

• Share home directory between Linux and Windows dual boot

  - by user877329

  This question is somewhat similar to How to use Windows Share has home directory, but in this case Windows is not running. I have installed a dual-boot configuration with Ubuntu 12.04 and Windows. My Windows partition is mounted on /C. Now I want either Ubuntu to locate home directories in /C/Users Which is the location of windows accounts or I want Windows to use D:\home for home directories. (D is the name of the Ubuntu root directory). For the first approach, I have managed to create a test user account test-user:x:1004:1001:Test:/C/Users/test-user:/bin/bash The account works but test-user cannot run any X session. From .xsession-errors chmod: Changing rights on ”/C/Users/test-user/.xsession-errors”: Operation not permitted Would it help get rid of that chmod, which has no effect? How do I? If I use the second approach, I need the Ext2fsd driver, which seems to work, but I am not sure if Windows maps the Ext2 system that early. Here is my fstab proc /proc proc nodev,noexec,nosuid 0 0 UUID=e7cef061-ed8d-4a82-b708-0c8f4c6f297f / ext3 errors=remount-ro 0 1 UUID=2CDCEB43DCEB0644 /C ntfs defaults,umask=007,gid=46 0 0 UUID=b087b5c0-b4bd-47e7-8d34-48ad9b192328 none swap sw 0 0 Update: I found something here: http://www.tuxera.com/community/ntfs-3g-advanced/ Will work if i do a correct mapping between NT users and Linux users.

  Read the article

• Ethernet Connection Unavailable

  - by fabikw

  I'm running Ubuntu Server 12.04 on a laptop with an Intel NIC (driver e1000e). When I connect the ethernet port to the internet (college network, DHCP) it works out of the box. Now I'm trying to connect it to a networked USRP (if you want to know what it is). A friend of mine managed to do this in his laptop (running regular Ubuntu 12.04) just by setting up a new Wired connection in the Network Manager with appropriate addresses. However, when I do the same, no wired connections are available. The output of nmcli -p dev is =========================================== Status of devices =========================================== DEVICE TYPE STATE ------------------------------------------- wlan0 802-11-wireless connected eth0 802-3-ethernet unavailable but the cable is connected to the device and the device is powered up. Any idea how to solve this? UPDATE: After stopping the network-manager service, setting up the connection manually and starting the service again, it now detects the ethernet connection. However, the device still can't receive data and doesn't answer to pings. UPDATE 2: As suggested I tried using a cross over cable but the result is exactly the same. However, I found out that connecting the device to the dock (as opposed to directly to the laptop) works fine. I know that the ethernet port in the laptop works fine, because connecting to the network through it works. Is it possible that the port in the laptop doesn't support Gb Ethernet (because that's what the device requires) but the one in the dock does?

  Read the article

• Dual Monitor 'How To' for 12.04

  - by Kim Prince

  I recently built my own PC and was delighted with the result, except for a problem with dual monitors. After having tried a few different combinations of hardware, I think what I really need is a 'how to' explanation. My motherboard is an MSI Z77MA-G45, which has an analogue, a DVI, and a HDMI port. Initially I hooked monitors up to the DVI and analogue port and it seemed to work fine. Both screens worked independently of each other, it was great. After a few days I started turning my PC off at night, and when I tried to turn it back on it would boot into the terminal mode. I would have to turn one of the monitors off and after rebooting a few times, it would eventually boot into an X Window session. Occasionally I would see an error relating to Xorg. I upgraded the motherboard BIOS but that made no difference. Eventually, I installed a graphics card - an NVIDIA GeForce GT 520. Now it seems that my on board graphics have been disabled completely, and I am reliant on the graphics card. Furthermore, the graphics card seems to only recognise one screen at a time. (The first time I rebooted with both plugged in, it flashed up a message saying that it was auto-selecting DVI). Anyhow, I think I need some 'how to' (or perhaps 'where to'), from here. For example, is X Windows configuration the next place to look? And how do I go about configuring X Windows? (Note that in Systems Settings it says my graphics driver is 'unknown', and when I ask it to detect monitors, it sees only the one!)

  Read the article

• Dualboot Asus n56v (ubuntu / win 7 x64) - ubuntu doesn't detect partition table made by windows

  - by user76439

  I have an Asus n56v and I've got troubles installing Ubuntu 12.04 x64. I already have installed Windows 7 x64! The hard drive is: Hitachi HTS547575A9E384 My problem: The installation program doesn't recognize the already existing partitions and is offering only options where there are partitions. Can someone help me out? Is this an ACPI/IDE conflict, missing driver or conflict with Windows 7? (I'm not an expert on Linux, only working sometimes with it.) I now tried out some options concerning EFI with a GTP-table. Everything worked but I wasn't able to fix a dual boot (Windows boot loader) nor with GRUB2. The laptop is still having a BIOS, but is able to boot DVDs/CDs in EFI-mode. Now I try to avoid EFI and GTP using the old windows MBR style. I reinstalled Windows, so far no problem. When I want to try to install Ubuntu, it doesn't detect the already existing partition table. It is just showing me an empty space for the whole disk. Other threads like Ubuntu 12.04 does not see windows already install on my computer (dual installation) don't help me out. os-prober shows me a correct result. I don't know how to deal with gdisk as shown in Installer doesn't detect existing partition table/windows 7 partition. I have 750GB for the whole disk. I'm using: 90GB for Windows reserved partition + system partition, 500GB for data and the rest should be for SWAP and linux-system. How can I make Ubuntu detect the partition table?

  Read the article

• Error loading libGL.so.1

  - by jdp407

  When attempting to run various pieces of software (notably Steam and Yenka), I have come across an error similar to this: enter code here error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory I'm running a 64 bit system, with an NVidia Optimus card (I dual boot for certain windows only software that requires a dedicated graphics card). I have bumblebee installed, and I am using the nvidia-current driver, rather that one downloaded from NVidia, as recommended. The library (libGL.so.1) is not present in the top directory of /usr/lib, however it is present in /usr/lib32/nvidia-current, as a softlink to /usr/lib32/nvidia-current/libGL.so.304.64. A section of the output from ldconfig -p: libGL.so.1 (libc6,x86-64, OS ABI: Linux 2.4.20) => /usr/lib/x86_64-linux-gnu/mesa/libGL.so.1 libGL.so (libc6,x86-64, OS ABI: Linux 2.4.20) => /usr/lib/x86_64-linux-gnu/libGL.so libGL.so (libc6,x86-64, OS ABI: Linux 2.4.20) => /usr/lib/x86_64-linux-gnu/mesa/libGL.so Obviously a library with that name is being loaded, but they are located in /usr/lib/x86_64-linux-gnu, however installed software doesn't seem to able to 'see' it. For Steam, running it with optirun causes it to work, but this is not the case for Yenka. I assume that optirun causes the library stored in /usr/lib32/nvidia-current to be used, which allows Steam to run, so I can't understant why Yenka won't run. Can anyone explain why software can't see the normal mesa library, and why Yenka refuses to run with the nvidia-current library?

  Read the article

• X won't start, root filesystem mounted read only

  - by TK Kocheran

  I just experienced a very strange and puzzling problem on my machine that I can't seem to get sorted out. I was running Windows on a second partition, and everything was working great. I then went to restart into Linux, and noticed that X wouldn't start. Everything was displayed in super-low resolution, so I tried reinstalling my NVIDIA driver. I started seeing all of these I/O error problems, so I figured that my SSD was bad. After a bit more playing around, I ran fsck on the drive when mounted from a startup disk as well as badsectors and everything looked great. The SMART drive tests all passed and again, everything was looking good, so I rebooted again and still, no joy. I started then getting some weird USB errors, so I followed someone's advice and unplugged my computer's power supply, then started back up again and my graphics looked a lot better in the BIOS and in the boot logo, but X still wouldn't start. I then found out that my main boot drive was being mounted read-only for some reason. What's going wrong? I've done some pretty extensive tests on the SSD from a startup disk such as writing massive files, reading big files, running filesystem checks on the entire disk, and everything is looking great, until I try to boot. Whenever I try installing the drivers with apt-get, I get a ton of ata error messages looking like this: How can I diagnose what's going wrong and fix it so I can get back to work?

  Read the article

• SSD I/O extremely slow installing/booting Ubuntu 12.04

  - by Menda

  These are some useful specs: Macbook Pro 7,1 OWC Mercury Extreme Pro 2,5" SATA SSD (120 GB). Has SandForce driver. Ubuntu 12.04 Desktop 32 bits. One 18 GB partition for GNU/Linux and 1.5 GB for SWAP. MD5 for the Ubuntu install CD is OK. I tried to install Ubuntu. It seems that everything is recognized, but there's a big problem: read and writes to the SSD are extremely slow. For example, the install process, which shouldn't take more than 20 minutes, it takes 7 hours. Then, booting up the computer takes about 20 minutes. I checked and the problem is definitely the SSD. Every access to any file is like 10 times slower than normal. I have tried to format the partition as Ext4 and Ext3 with the same problem. Trying to install other distros like Fedora 17, I have a similar problem. There's a "lag" with the SSD, but not so accused as in Ubuntu. Surprisingly, Debian 6.0 installs and works without any problem. Mac OS works pretty good as well in the other partition, so I discard it's an SSD problem. Thanks for your help!

  Read the article

• Why does my fan run so hard on my Dell XPS 15z?

  - by Kilhoffer

  I recently bought a Dell XPS 15z. It came with Windows 7 Home Premium, but I really wanted to try out Ubuntu on it. I ran the Windows installer and was surprised how smooth the process was. Within 10 minutes, I had a dual boot setup with Ubuntu 11.10. It boots into Ubuntu just fine and everything seems to work. I've read a lot about problems with touchpad and wireless, but honestly, I've had none of those issues. The only thing that's really bothering me is the fan constantly runs fast. Under Windows, it rarely ever came on and when it did, it wasnt spinning that fast. What could be going on under Ubuntu that would cause this? I want to get that under control because I want to use Ubuntu as my primary OS and screw Windows. Any help would be much appreciated! Note: I've read that others have set acpi=false, but I have not made any changes to the default installation. Should I make that change?

  Read the article

• Can't configure 5.1 audio with 12.04

  - by xster

  I have an Intel ALC892 and a Nvidia GT 520m connected to speakers via HDMI. On lspci, I see 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Subsystem: ZOTAC International (MCO) Ltd. Device a218 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at db400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel 02:00.1 Audio device: NVIDIA Corporation HDMI Audio stub (rev a1) Subsystem: ZOTAC International (MCO) Ltd. Device 2180 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at db080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel My alsamixer looks like I enabled pulseaudio configuration file to have 6 channels. My sound setting looks like When I use the test dialog, only front left and right have sounds. If I use alsa in XBMC on a 5.1 video, there's no sound. If I use pulseaudio, only front right and left have sound. I can barely hear any speech since I'm guessing it's mapped to front center. Any clues?

  Read the article

• How can I play 24Bit 96000Hz vinyl rips?

  - by Peter

  I am getting music through the Nvidia HDMI but it is all down-sampled to 44000Hz. I have spent at least 3 hours searching for an answer yesterday. I use Pulse Volume and I even changed the default settings in the Pulse folder to 96000 but it does not work. Though 5.1 sound works perfectly. They all work well in Windows 7, but I prefer to use Ubuntu. All the config files for all the programs are in the etc folder, then look in the pulse folder, and there are 3 three files, 2 of these I changed the permissions and I changed 16 and 44000 to 24 and 96000 as I had read in another forum, but it worked for them and not for me. Though 5.1 works as I have special mp4 file that can check each channel. I did alot of restarts and checking after these changes as nothing had happened, my amp tells me the freq of the signal, which does work which I have tested on Windows 7. I have also gone to systems to download the latest driver for mu Nvidia card. But even if it does not work, I guess I can always play Cd's. But I think my player have become more unstable since I changed the configs, so I may uninstall and install Pulse Volume Control again.

  Read the article

• Laptop keyboard and touchpad disabled on startup

  - by JAM

  I use Ubuntu 14.04 LTS on my Toshiba Satellite L775D laptop. 14.04 is the only operating system installed. I am new to Linux and only barely scratching the surface of doing things in terminal. When I boot my laptop keyboard and touchpad are disabled (99.99% of the time) if I do nothing. The only direct effect I can have is to keep pressing the "numlock" key during boot when I notice the "numlock" light goes off. If I do this then I have a 95% chance of the keyboard and touchpad working when I am in the operating system. I am able to use my wireless mouse regardless. I have not seen any messages during boot. Previously I have tried playing with input method settings and utilities as well as language support settings. This same problem exists with the 12.... and 13... versions of ubuntu. With everything I have tried (from looking at other posts/suggestions) it seems I can have only a temporary effect. Please help me find a permanent solution to this problem. thank you.

  Read the article

• Which things instantly ring alarm bells when looking at code? [closed]

  - by FinnNk

  I attended a software craftsmanship event a couple of weeks ago and one of the comments made was "I'm sure we all recognize bad code when we see it" and everyone nodded sagely without further discussion. This sort of thing always worries me as there's that truism that everyone thinks they're an above average driver. Although I think I can recognize bad code I'd love to learn more about what other people consider to be code smells as it's rarely discussed in detail on people's blogs and only in a handful of books. In particular I think it'd be interesting to hear about anything that's a code smell in one language but not another. I'll start off with an easy one: Code in source control that has a high proportion of commented out code - why is it there? was it meant to be deleted? is it a half finished piece of work? maybe it shouldn't have been commented out and was only done when someone was testing something out? Personally I find this sort of thing really annoying even if it's just the odd line here and there, but when you see large blocks interspersed with the rest of the code it's totally unacceptable. It's also usually an indication that the rest of the code is likely to be of dubious quality as well.

  Read the article

• USB flash module giving errors

  - by vshenoy

  Hi, I have a SATA USB flash module which was earlier running a 2.4 linux kernel (2.4.36.6) and on which now I am trying to install ubuntu server 10.04.1 LTS. I have two such USB flash modules and on one of them the installation process itself giving these errors: sd 4:0:0:0 [sda] Device not ready sd 4:0:0:0 [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 4:0:0:0 [sda] Sense Key : Not Ready [current] sd 4:0:0:0 [sda] Add. Sense: Medium not present sd 4:0:0:0 [sda] CDB: Write(10): 2a 00 00 05 48 02 00 00 04 00 end_request: I/O error, dev sda, sector 46114 usb 1-1: reset high speed USB device using ehci_hcd and address 2 Buffer I/O error on device sda1, logical block 172033 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 172034 lost page write due to I/O error on sda1 on the other the installation is successful, but after a day or two of running the machine hangs because of kernel spewing these messages: Remounting filesystem read-only EXT2-fs error (device sda1): read_block_bitmap: Cannot read block [bitmap - block_group = 105, block_bitmap = 860161] EXT2-fs error (device sda1): ext2_get_inode: unable to read inode block - inode=13083, block=24683 ext2_free_inode: bit already cleared for inode 83966 and the machine needs to be hard rebooted. On both the systems SCSI emulation with usb_storage driver is being used to detect the module. Here is the output of /proc/scsi/scsi on 2.4: # cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 02 and on 2.6: # cat /proc/scsi/scsi Attached devices: Host: scsi6 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 00 i.e. only 'ANSI SCSI revision:' is shown as different, although I am not sure if this can cause any problem. Really appreciate if someone can point as to how to debug this issue or any mailing list where I can further ask questions about this.

  Read the article

• Google Chrome on Ubuntu 12.04 not rendering webpages correctly

  - by sumit_gt

  I am facing some serious web page rendering issues with Chrome. It is more prominent during javascript based animations and stuff on websites like youtube. I have tried removing chrome using (sudo apt-get purge google-chrome-stable) and then reinstalling it. But the problems still persist. The same webpages work correctly on firefox on ubuntu and chrome on windows. The problem only shows up when I use chrome on ubuntu. I think the issue has started after I updated to the latest version of Chrome. I have used Chrome previously on this machine without any problems. I have attached a image that demonstrates the issue. What could possibly be the problem? PS: here's the output of lshw -c video: *-display description: VGA compatible controller product: Madison [Radeon HD 5000M Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:46 memory:e0000000-efffffff memory:f0020000-f003ffff ioport:d000(size=256) memory:f0000000-f001ffff Here's the output of lspci -nn: output of lspci -nn

  Read the article

• Random touchpad and keyboard freezes on new 10.10 installation

  - by ancaleth

  My touchpad and keyboard freeze up on my newly installed Ubuntu 10.10. I was using Ubuntu 10.4 via wubi before on this Laptop where this problem never occurred. (I did not migrate wubi or upgrade to 10.10, it's a fresh start. 64-bit on Dell Studio, plenty of RAM, plenty of free space on partition etc.) I can't say there is a pattern yet, once it happened during the download of packages with the Update Manager, once it was just using Firefox, no other program running. I was forced to shut down manually. In between these crashes the laptop was booted once, updates were installed etc., firefox was used and there weren't any problems. Both crashes should be in the attached kern.log and I noticed there were some error problems before the last crash (at the end, obviously). It seems the wireless was experiencing problems. This wasn't noticed on the user end, since the touchpad + keyboard were already frozen. kern.log: http://paste.ubuntu.com/552617/ How can the freezes be fixed?

  Read the article

• How do I get a Dell Latitude e6420 working?

  - by David_G

  I've just installed Ubuntu 12.04 (64-bit) on a brand new Dell Latitude e6420, and I'm having a few problems. This laptop has an Optimus (?) setup - i.e. integrated gfx and an Nvidia Quadro NVS 4200M. First problem - I ran setup, etc, and discovered that I can only run unity2d - If I try and login with unity3d, it just defaults to 2d. This is with nvidia-current installed (302.07). Note also that I can't run nvidia-settings ("You do not appear to be using the NVIDIA X driver."), and there is no additional drivers found ("No proprietary drivers are in use on this system"). I tried to troubleshoot this, and removed nvidia, leaving (I guess) just Nouveau drivers - In that case, unity3d did work, but I was stuck with the open source Nouveau drivers powering the integrated graphics. So, obviously, I want to run unity3d, and be using the more powerful Nvidia graphics card. I've tried a bit of tinkering around, but I'm not sure the best way to proceed, or perhaps more importantly, I'm not sure of what the best final solution might be. I've heard about bumblebee - but frankly, I would prefer to have the proprietary Nvidia drivers working properly. Any help would be much appreciated!

  Read the article

• CodePlex Daily Summary for Sunday, August 24, 2014

  CodePlex Daily Summary for Sunday, August 24, 2014Popular ReleasesCS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.31.0: Fixed problem with menu item 'Plugins->CS-SCript->Debug' invoking 'Run' instead of 'Debug'.Media Companion: Media Companion MC3.599b: New:* MC - Remember last monitor Media Companion Ran on, and re-open there if available. * MC - If notepad++ installed, use for opening nfo XML files. * Movie - Fix: Fanart & Poster searching using 'Google Search' button opened multiple browser tabs, one per search word. * Movie - Allow Re-scrape with XBMC TMDB Scraper, if IMDB Id is present. * TV - added option to save Season Poster into season folder as folder.jpg Fixed:* Movie - Table view error if a row header was selected. * Movie - Tab...ASP.NET Identity 2.0 Azure Table Storage: Release 1.2.5.2: Optimizing the login and email index queries. Optimizing IsInRoleAsync operation. 100% unit test pass and 100% code coverage. Full sample source available as a download or in the source branch /Releases/1.2.x.x/sample. Sample code doesn't require an Azure account but does require the Azure SDK with the Storage Emulator at a minimum for running locally. Full suite of unit tests against this assembly at 100% pass rate against the Azure Local Emulator and against a live Azure Storage acc...BugNET Issue Tracker: BugNET 1.6.327: This release contains fixes and enhancements from the previous 1.6.315 release. Please read our release notes for BugNET 1.6.327: http://blog.bugnetproject.com/2014/08/23/bugnet-1-6-327-and-bugnet-pro-1-5-99-released/DIII Save Editor: ROS Alpha 1.2.14.100: initial Ros alpha release please report all bugsSEToolbox: SEToolbox 01.044.014 Release 2: Fixed Ship name not saving. Fixed broken cubes view Bug. Fixed cast VRage.MyFixedPoint error when opening games with Meteors. Added checkbox when Importing 3d model to Export ship, to fill it as solid.CS-Script Source: Release v3.8.5: Fixed problem with the warnings getting hidden in case of the successful compilation cs-script.7z - CS-Script Suite (binaries, documentation, samples) cs-script.ExtensionPack.7z - CS-Script Extension Pack (additional binaries and samples) cs-scriptDocs.7z - CS-Script DocumentationMagick.NET: Magick.NET 7.0.0.0002: Magick.NET linked with ImageMagick 7babelua: 1.6.7.0: V1.6.7.0 - 2014.8.21New feature: add a file search window ( ctrl+1 or ALT+L ), like The file search in VC Assistant; Stability improvement: performance improvement when BabeLua load/unload; performance improvement when debugger load lua files;XboxConsole: XboxConsole 2.0.40820.0: Updated release with added support for: - August XDK - Party API (See updated documentation) Supports the following XDK versions: April 2014 May 2014 June 2014 (all QFEs) July 2014 (all QFEs) August 2014Open NFe: RDI Open NFe 3.0 (alpha): Atualização para o layout 3.10 da NFe.AssaultCube Reloaded: Release 2.6.1: Windows XP USERS must download the patch in addition to the Windows package. Some changes couldn't make it to 2.6, and a recode was started before 2.6.1 could be released. However, the version 2.6.1 is used to represent the first beta release of 2.7. Changelog: Recoded on AC 1.2 as the base version (likely less crashes) Class manager Simpler killfeed, removed kill messages Hide KILL indicator in classic, update at 4 second intervals Disable spawn protection upon firing the first sh...SysLog Server: SysLogServer: This is not a commersial product, use on your own responsibilityMolGridCal & MolCal: MolGridCal tutorial v1.1: Update the contents for grid computing virtual screening.MSSQL Deployment Tool: Microsoft SQL Deploy Tool v1.3.1: MicrosoftSqlDeployTool: v1.3.1.38348 What's changed? Update namespace and assembly name. Bug fixing.SharePoint 2013 Search Query Tool: SharePoint 2013 Search Query Tool v2.1: Layout improvements Bug fixes Stores auth method and user name Moved experimental settings to Advanced boxCtrlAltStudio Viewer: CtrlAltStudio Viewer 1.2.2.41183 Alpha: This alpha of the CtrlAltStudio Viewer provides some preliminary Oculus Rift DK2 support. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-2-2-41183-alpha Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http://ctrlaltstudio.com/viewer/privacy Disclaimer: This software is not provided or supported by Linden Lab, the makers of Second Life.HDD Guardian: HDD Guardian 0.6.1: New: package now include smartctl 6.3; Removed: standard notification e-mail. Now you have to set your mail server to send e-mail alerts; Bugfix: USB detection error; custom e-mail server settings issue; bottom panel displays a wrong ATA error count.VG-Ripper & PG-Ripper: VG-Ripper 2.9.62: changes NEW: Added Support for 'MadImage.org' links NEW: Added Support for 'ImgSpot.org' links NEW: Added Support for 'ImgClick.net' links NEW: Added Support for 'Imaaage.com' links NEW: Added Support for 'Image-Bugs.com' links NEW: Added Support for 'Pictomania.org' links NEW: Added Support for 'ImgDap.com' links NEW: Added Support for 'FileSpit.com' links FIXED: 'ImgSee.me' linksCMake Tools for Visual Studio: CMake Tools for Visual Studio 1.2: This release adds the following new features and bug fixes from CMake Tools for Visual Studio 1.1: Added support for CMake 3.0. Added support for word completion. Added IntelliSense support for the CMAKEHOSTSYSTEM_INFORMATION command. Fixed syntax highlighting for tokens beginning with escape sequences. Fixed issue uninstalling CMake Tools for Visual Studio after Visual Studio has been uninstalled.New ProjectsDnn Picasa Image Gallery: The DnnC Picasa Image Gallery module allow you to display your Picasa web albums and there photos within your Dnn website.Hot Mess: Hot Mess game software and arduino firmware.Kinect HD Face Sample in unmanaged C++: This is a C++ unmanaged project which is based on the Kinect For Windows v2 SDK sample: FaceBasics. Instead of using the Face source, it utilizes the HDFaceModbus Master: A MODBUS Master application for Windows supporting all MODBUS function codes, a plugin interface and scripting interface.Path Finding on Wireless Sensor Network: Path Finding on Wireless Sensor Networkperilla: enhanced c++ templateXiamiSigLite-Silent: ???????，??Win7??。

  Read the article

• Can certain system-hungry modules be disabled in Ubuntu?

  - by Ole Thomsen Buus

  Hi, Let me add some context: I am currently using Ubuntu 9.10 64-bit (Desktop) on a relatively powerful stationary PC (Intel Core i7 920, 12GB ram). My purpose is highspeed imaging with a pointgrey Grashopper machine-vision camera (for research, PhD project). This camera is capable of 200 fps at full VGA (640x480) resolution. The camera is connected using Firewire (1394b) and the drivers and software from Pointgrey works great. I have developed a console C++ application that can grap a certain number of frames to preallocated memory and after this also save the grapped frames to harddrive. Currently it works fine but sometimes I am observing a few framedrops (1-3). When this happens I reset the experiment and repeat the recording and usually i am lucky the second time with no framedrops (the camera-driver has a internal framecounter that I am using). Question: I usually go to tty1 and use "sudo service gdm stop" to disable the graphical frontend. It seems to release some memory though that is not my main concern. My concern is CPU resources. Are there other system hungry modules that can be disabled temporarily such that the CPU gets less busy on Ubuntu 9.10? At some point in the future I will update to 10.10. Should I perhaps option for the server edition instead? Thanks.

  Read the article

• Ubuntu 14.04: Fine tuning Touchpad for ThinkPad S431

  - by ramgorur

  I am using Ubuntu 14.04 on Lenovo ThinkPad S431. The touchpad is very bumpy, tricky to use. Slides down with a small touch, sometimes jerks erratically. I have tried to modify the settings in /usr/share/X11/xorg.conf.d/50-synaptics.conf file as below -- Section "InputClass" Identifier "touchpad catchall" Driver "synaptics" MatchIsTouchpad "on" MatchDevicePath "/dev/input/event*" Option "JumpyCursorThreshold" "250" Option "VertResolution" "100" # Option "HorizResolution" "65" # Option "MinSpeed" "1" # Option "MaxSpeed" "1" # Option "AccelerationProfile" "1" # Option "AdaptiveDeceleration" "8" # Option "ConstantDeceleration" "1" # Option "VelocityScale" "128" Option "HorizHysteresis" "150" Option "VertHysteresis" "150" EndSection There are lots of options here, does anyone know how to get a fine-tuned values for the above options (for ThinkPad S431)? The Hysteresis values seems to alleviate the problem a little bit, but failed to get a perfect result. EDIT: According to this bug report for ThinkPad X230 (+X230t), I set these values and quite good for now -- Option "VertResolution" "100" Option "HorizResolution" "65" Option "MinSpeed" "1" Option "MaxSpeed" "1" Option "AccelerationProfile" "2" Option "AdaptiveDeceleration" "16" Option "ConstantDeceleration" "16" Option "VelocityScale" "32" Option "HorizHysteresis" "50" Option "VertHysteresis" "50" and then you need to increase the cursor speed manually from the Unity mouse settings. But I am still looking for a fully functional (possibly with all the gestures) and a fine-tuned touchpad settings for S431. Further help is appreciated.

  Read the article

• Desktop goes blurry / granulated

  - by Bonfire

  After few minutes using, desktop and fonts in unity-menu goes blurry. See screenshot.! In all applications (browser etc.) graphics seem to be allright. After rebooting problem disappears for few minutes. Changing the wallpaper also makes the desktop clear (for a while) but fonts are still blurry. I have ubuntu 12.04 and windows xp dualbooted. lspci: 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) 00:02.1 Display controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) lshw -c video: *-display:0 description: VGA compatible controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:d0100000-d017ffff ioport:30c0(size=8) memory:c0000000-cfffffff memory:d0180000-d01bffff *-display:1 UNCLAIMED description: Display controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 02 width: 32 bits clock: 33MHz capabilities: cap_list configuration: latency=0 resources: memory:40000000-4007ffff Have you got any ideas to get this solved? Thank you very much! Bonfire

  Read the article

• Graphics hardware warning when updating to 14.04

  - by pacomet

  As I use Ubuntu at work I just update only LTS versions but now I'm not sure if I can/should. As my computer is now ten years old I would change if was mine but as it is owned by my employer I have to work with it. It's not a bad one, it runs fine (this was not true when still had Windows on it ;-). When updating to 14.04, it warns about possible bad/slow performance with Unity 3D so I stop updating as I am at work, not my own computer. As I understand from http://askubuntu.com/a/438958/25305 Nvidia Geforce FX 5500 graphics card is still supported in 14.04. Now, in 12.04, I have driver version 173 and unity 2d runs fine for me. output of /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce FX 5500/AGP/SSE2 OpenGL version string: 2.1.2 NVIDIA 173.14.39 Not software rendered: yes Not blacklisted: no GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no Should I update? Is it better to stay with 12.04? Thanks

  Read the article

• Laptop Display Not Working

  - by etrask

  Hello, I just purchased this laptop. It is working fine but I want to use Xubuntu on it. I managed to get 10.04 installed and running but it did not recognize/use the wireless card. So I want to try 10.10. However, every time I try, the screen goes black and never comes back on. I have tried the Live CD and Alternate install CDs, for both Ubuntu and Xubuntu 10.10. After I select "Install Ubuntu" or "Try Ubuntu", the screen blacks out and never displays anything. So I deleted "quiet" and "splash" off the command line to see what messages would come up. A bunch of text flies by but it ends at: [time] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [time] TCP bind hash table entries 65536 (order: 8, 1048576 bytes) [time] TCP: Hash tables configured (established 524288 bind 65536) [time] TCP reno registered [time] UDP hash table entries: 2048 (order: 4, 65536 bytes) [time] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [time] NET: Registered protocol family 1 And freezes here forever. I have tried nomodeset, vga=771, and xforcevesa with no progress. Is my video card simply not going to work with this distro? It seems strange that 10.04 would work fine but not 10.10. Any help is appreciated, thank you.

  Read the article

• How to prevent Network Manager from auto creating network connection profiles with "available to everyone" by default

  - by airtonix

  We have several laptops at work which use Ubuntu 11.10 64bit. I have our Wifi Access Point requiring WPA2-EAP Authentication (backed by a LDAP server). I have the staff using these laptops when doing presentations by using the Guest Account. So by default when you have a wifi card, network manager will display available Wireless Access Points. So the logical course of action for a Novice(tm) user is to single left click the easy to use option in the Network Manager drop down list... At this point the Staff Member (who is logged in with the guest account) expects to just be able to connect and enter any authentication details if required. But because they are using the Guest account, they won't ever have admin permissions (nor do I want them to), and so PolKit kicks in with a request for admin authorisation. I solved this part by modifying the PolKit permissions required to allow all users to create System Network Connections... However, because these Staff members are logging onto the Wifi Access Point with Ldap Credentials and because the Network Manager is now saving those credentials as a System Connection, their password is available for the next guest user session (because system connection profiles are stored in /etc/NetworkManager/system-connections.d/* ). It creates system connections by default because "Available to all users" is ticked by default when you quickly connect to a new wifi access point. I want Network Manager to not tick this by default. This way I can revert the changes I made to Polkit and users network connection profiles will be purged when they log out.

  Read the article

• File browsing on Nautilus extremely slow after upgrade to 12.04

  - by Tobelli

  One month ago I updated (no fresh install) to 12.04. Since then nautilus got extremely slow. When I open a folder that contains many subfolders I sometimes have to wait 4 seconds until everything is displayed. This has never been like that before, in previous versions I could always browse between my files extremely fast. I looked in "additional drivers" and changed from Nvidia current-version-update to the recommended drivers. This drastically increased the performance and speed of file browsing, unfortunately just for a couple of days. Now I am stuck again with the very slow Nautilus. I also tried to install the latest nvidia driver like it was suggested here: http://www.techlw.com/2012/03/install-nvidia-drivers-on-ubuntu-1204.html Did not work at all. Also when using the dash to try to find files it does not respond properly: does not find files or loads for ages until the file is displayed. I am working on an Acer Notebook with Intel® Core™ i5 CPU M 430 @ 2.27GHz × 4 6GB RAM GeForce GT 320M/PCIe/SSE2 64 Bit Ubuntu 12.04

  Read the article

< Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >