Search Results

Search found 12338 results on 494 pages for 'game ai'.

Page 309/494 | < Previous Page | 305 306 307 308 309 310 311 312 313 314 315 316  | Next Page >

• How can I generate signed distance fields in real time, fast?

  - by heishe

  In a previous question, it was suggested that signed distance fields can be precomputed, loaded at runtime and then used from there. For reasons I will explain at the end of this question (for people interested), I need to create the distance fields in real time. There are some papers out there for different methods which are supposed to be viable in real-time environments, such as methods for Chamfer distance transforms and Voronoi diagram-approximation based transforms (as suggested in this presentation by the Pixeljunk Shooter dev guy), but I (and thus can be assumed a lot of other people) have a very hard time actually putting them to use, since they're usually long, largely bloated with math and not very algorithmic in their explanation. What algorithm would you suggest for creating the distance fields in real-time (favourably on the GPU) especially considering the resulting quality of the distance fields? Since I'm looking for an actual explanation/tutorial as opposed to a link to just another paper or slide, this question will receive a bounty once it's eligible for one :-). Here's why I need to do it in real time:

  Read the article

• How to had operation with character/items on binary with concrete operations on C++?

  - by Piperoman

  I have the next problem. A item can had a lot of states: NORMAL = 0000000 DRY = 0000001 HOT = 0000010 BURNING = 0000100 WET = 0001000 COLD = 0010000 FROZEN = 0100000 POISONED= 1000000 A item can had some states at same time but not all of them Is impossible to be dry and wet at same time. If you COLD a WET item, it turns into FROZEN. If you HOT a WET item, it turns into NORMAL A item can be BURNING and POISON Etc. I have try to set binary flags to states, and use AND to set operation to combine different states, checking before if is possible or not to do it, or change to another status. Exist a concrete patron to solve this problem efficiently without had a interminable switch that check every states with everynew states? It is relative easy to check 2 different states, but if exist a third state it is not trivial to do.

  Read the article

• Strange Flash AS3 xml Socket behavior

  - by Rnd_d

  I have a problem which I can't understand. To understand it I wrote a socket client on AS3 and a server on python/twisted, you can see the code of both applications below. Let's launch two clients at the same time, arrange them so that you can see both windows and press connection button in both windows. Then press and hold any button. What I'm expecting: Client with pressed button sends a message "some data" to the server, then the server sends this message to all the clients(including the original sender) . Then each client moves right the button 'connectButton' and prints a message to the log with time in the following format: "min:secs:milliseconds". What is going wrong: The motion is smooth in the client that sends the message, but in all other clients the motion is jerky. This happens because messages to those clients arrive later than to the original sending client. And if we have three clients (let's name them A,B,C) and we send a message from A, the sending time log of B and C will be the same. Why other clients recieve this messages later than the original sender? By the way, on ubuntu 10.04/chrome all the motion is smooth. Two clients are launched in separated chromes. windows screenshot Can't post linux screenshot, need more than 10 reputation to post more hyperlinks. Listing of log, four clients simultaneously: [16:29:33.280858] 62.140.224.1 >> some data [16:29:33.280912] 87.249.9.98 << some data [16:29:33.280970] 87.249.9.98 << some data [16:29:33.281025] 87.249.9.98 << some data [16:29:33.281079] 62.140.224.1 << some data [16:29:33.323267] 62.140.224.1 >> some data [16:29:33.323326] 87.249.9.98 << some data [16:29:33.323386] 87.249.9.98 << some data [16:29:33.323440] 87.249.9.98 << some data [16:29:33.323493] 62.140.224.1 << some data [16:29:34.123435] 62.140.224.1 >> some data [16:29:34.123525] 87.249.9.98 << some data [16:29:34.123593] 87.249.9.98 << some data [16:29:34.123648] 87.249.9.98 << some data [16:29:34.123702] 62.140.224.1 << some data AS3 client code package { import adobe.utils.CustomActions; import flash.display.Sprite; import flash.events.DataEvent; import flash.events.Event; import flash.events.IOErrorEvent; import flash.events.KeyboardEvent; import flash.events.MouseEvent; import flash.events.SecurityErrorEvent; import flash.net.XMLSocket; import flash.system.Security; import flash.text.TextField; public class Main extends Sprite { private var socket :XMLSocket; private var textField :TextField = new TextField; private var connectButton :TextField = new TextField; public function Main():void { if (stage) init(); else addEventListener(Event.ADDED_TO_STAGE, init); } private function init(event:Event = null):void { socket = new XMLSocket(); socket.addEventListener(Event.CONNECT, connectHandler); socket.addEventListener(DataEvent.DATA, dataHandler); stage.addEventListener(KeyboardEvent.KEY_DOWN, keyDownHandler); addChild(textField); textField.y = 50; textField.width = 780; textField.height = 500; textField.border = true; connectButton.selectable = false; connectButton.border = true; connectButton.addEventListener(MouseEvent.MOUSE_DOWN, connectMouseDownHandler); connectButton.width = 105; connectButton.height = 20; connectButton.text = "click here to connect"; addChild(connectButton); } private function connectHandler(event:Event):void { textField.appendText("Connect\n"); textField.appendText("Press and hold any key\n"); } private function dataHandler(event:DataEvent):void { var now:Date = new Date(); textField.appendText(event.data + " time = " + now.getMinutes() + ":" + now.getSeconds() + ":" + now.getMilliseconds() + "\n"); connectButton.x += 2; } private function keyDownHandler(event:KeyboardEvent):void { socket.send("some data"); } private function connectMouseDownHandler(event:MouseEvent):void { var connectAddress:String = "ep1c.org"; var connectPort:Number = 13250; Security.loadPolicyFile("xmlsocket://" + connectAddress + ":" + String(connectPort)); socket.connect(connectAddress, connectPort); } } } Python server code from twisted.internet import reactor from twisted.internet.protocol import ServerFactory from twisted.protocols.basic import LineOnlyReceiver import datetime class EchoProtocol(LineOnlyReceiver): ##### name = "" id = 0 delimiter = chr(0) ##### def getName(self): return self.transport.getPeer().host def connectionMade(self): self.id = self.factory.getNextId() print "New connection from %s - id:%s" % (self.getName(), self.id) self.factory.clientProtocols[self.id] = self def connectionLost(self, reason): print "Lost connection from "+ self.getName() del self.factory.clientProtocols[self.id] self.factory.sendMessageToAllClients(self.getName() + " has disconnected.") def lineReceived(self, line): print "[%s] %s >> %s" % (datetime.datetime.now().time(), self, line) if line=="<policy-file-request/>": data = """<?xml version="1.0"?> <!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd"> <!-- Policy file for xmlsocket://ep1c.org --> <cross-domain-policy> <allow-access-from domain="*" to-ports="%s" /> </cross-domain-policy>""" % PORT self.send(data) else: self.factory.sendMessageToAllClients( line ) def send(self, line): print "[%s] %s << %s" % (datetime.datetime.now().time(), self, line) if line: self.transport.write( str(line) + chr(0)) else: print "Nothing to send" def __str__(self): return self.getName() class ChatProtocolFactory(ServerFactory): protocol = EchoProtocol def __init__(self): self.clientProtocols = {} self.nextId = 0 def getNextId(self): id = self.nextId self.nextId += 1 return id def sendMessageToAllClients(self, msg): for client in self.clientProtocols: self.clientProtocols[client].send(msg) def sendMessageToClient(self, id, msg): self.clientProtocols[id].send(msg) PORT = 13250 print "Starting Server" factory = ChatProtocolFactory() reactor.listenTCP(PORT, factory) reactor.run()

  Read the article

• AABB - AABB Collision, which face do I hit?

  - by PeeS

  To allow my objects to slide when they collide, I need to : Know which face of the AABB they collide with. Calculate the normal to that face. Return the normal and calculate the impulse that to apply to the player's velocity. Question How can I calculate which face of the AABB I collided with, knowing that I have two AABB's colliding? One is the player and the other is a world object. Here's what that looks like (problem collision circled in white): Thank you for your help.

  Read the article

• Separate collision mesh model?

  - by Menno Gouw

  I want to have another go at 3D within XNA. What I have seen from some other games that they just have a separate very low poly model "cage" around the environment model. However I can not find any reference to this. I have not that much experience with XNA 3D either. Is it possible to have this cage within each of my environmental models already? Lets just say I call the mesh within the .FBX wall and col_wall. How would I call to these different meshes within XNA? The player would just have a tight collision cube around. To make it a bit more efficient I will be making divide the map up by cubes and only calculate collision if the player is in it. Question two: I can't find anywhere to do cube vs mesh collision. Is there a method for this? Or perhaps it is possible to build my collision cage out of cubes in the 3D app and on loading of the models in XNA replace them directly by cubes? So I could just do box to box collision which should be very cheap and still give the player the ability to move over ledges on the static models.

  Read the article

• Box 2D Collision Question

  - by Farooq Arshed

  I am very new to Box 2D Physics world. I wanted to know how to collide 2 bodies when one is Dynamic and other is Kinematic. The whole Scenario is explained below: I have 3 balls in total. I want to balls to remain in their places and the third ball to be able to move. When the third ball hits the other two balls then they should move according to the speed and direction from which they were hit. My gravity of the world is 0 because I only want z-axis gravity. I would also like some one to point me towards some good tutorials regarding Box 2D basics which is language independent. I hope I have explained my scenario well. Thanks for the help in advance.

  Read the article

• Check if an object is facing another based on angles

  - by Isaiah

  I already have something that calculates the bearing angle to get one object to face another. You give it the positions and it returns the angle to get one to face the other. Now I need to figure out how tell if on object is facing toward another object within a specified field and I can't find any information about how to do this. The objects are obj1 and obj2. Their angles are at obj1.angle and obj2.angle. Their vectors are at obj1.pos and obj2.pos. It's in the format [x,y]. The angle to have one face directly at another is found with direction(obj1.pos,obj2.pos). I want to set the function up like this: isfacing(obj1,obj2,area){...} and return true/false depending if it's in the specified field area to the angle to directly see it. I've got a base like this: var isfacing = function (obj1,obj2,area){ var toface = direction(obj1.pos,obj2.pos); if(toface+area >= obj1.angle && ob1.angle >= toface-area){ return true; } return false; } But my problem is that the angles are in 360 degrees, never above 360 and never below 0. How can I account for that in this? If the first object's angle is say at 0 and say I subtract a field area of 20 or so. It'll check if it's less than -20! If I fix the -20 it becomes 340 but x < 340 isn't what I want, I'd have to x 340 in that case. Is there someone out there with more sleep than I that can help a new dev pulling an all-nighter just to get enemies to know if they're attacking in the right direction? I hope I'm making this harder than it seems. I'd just make them always face the main char if the producer didn't want attacks from behind to work while blocking. In which case I'll need the function above anyways. I've tried to give as much info as I can think would help. Also this is in 2d.

  Read the article

• Why is my shadowmap all white?

  - by Berend

  I was trying out a shadowmap. But all my shadow is white. I think there is some problem with my homogeneous component. Can anybody help me? The rest of my code is written in xna Here is the hlsl code I used float4x4 xWorld; float4x4 xView; float4x4 xProjection; struct VertexToPixel { float4 Position : POSITION; float4 ScreenPos : TEXCOORD1; float Depth : TEXCOORD2; }; struct PixelToFrame { float4 Color : COLOR0; }; //------- Technique: ShadowMap -------- VertexToPixel MyVertexShader(float4 inPos: POSITION0, float3 inNormal: NORMAL0) { VertexToPixel Output = (VertexToPixel)0; float4x4 preViewProjection = mul(xView, xProjection); float4x4 preWorldViewProjection = mul(xWorld, preViewProjection); Output.Position =mul(inPos, mul(xWorld, preViewProjection)); Output.Depth = Output.Position.z / Output.Position.w; Output.ScreenPos = Output.Position; return Output; } float4 MyPixelShader(VertexToPixel PSIn) : COLOR0 { PixelToFrame Output = (PixelToFrame)0; Output.Color = PSIn.ScreenPos.z/PSIn.ScreenPos.w; return Output.Color; } technique ShadowMap { pass Pass0 { VertexShader = compile vs_2_0 MyVertexShader(); PixelShader = compile ps_2_0 MyPixelShader(); } }

  Read the article

• HUD layer not being added on my scene

  - by Shailesh_ios

  I have a CCScene which already holds my gameLayer and I am trying to add HUD layer on that.But the HUD layer is not getting added in my scene, I can say that because I have set up a CCLabel on HUD layer and when I run my project, I cannot see that label. Here's what I am doing : In my gameLayer: +(id) scene { CCScene *scene = [CCScene node]; GameScreen *layer = [GameScreen node]; [scene addChild: layer]; HUDclass * otherLayer = [HUDclass node]; [scene addChild:otherLayer]; layer.HC = otherLayer;// HC is reference to my HUD layer in @Interface of gameLayer return scene; } And then in my HUD layer I have just added a CCLabelTTF in its init method like this : -(id)init { if ((self = [super init])) { CCLabelTTF * label = [CCLabelTTF labelWithString:@"IN WEAPON CLASS" fontName:@"Arial" fontSize:15]; label.position = ccp(240,160); [self addChild:label]; } return self; } But now when I run my project I dont see that label, What am I doing wrong here ..? Any Ideas.. ? Thanks in advance for your time.

  Read the article

• How can I load .obj files in the Soya3D engine?

  - by John Riselvato

  I recently just found soya3d. I want to import .obj files, but it seems to only accept .data files. How can I import .obj files? Importing a .obj file named "house" produces this error: Traceback (most recent call last): File "introduction.py", line 7, in <module> model = soya.Model.get("house") File "/usr/lib/pymodules/python2.6/soya/__init__.py", line 259, in get return klass._alls.get(filename) or klass._alls.setdefault(filename, klass.load(filename)) File "/usr/lib/pymodules/python2.6/soya/__init__.py", line 268, in load dirname = klass._get_directory_for_loading_and_check_export(filename) File "/usr/lib/pymodules/python2.6/soya/__init__.py", line 194, in _get_directory_for_loading_and_check_export dirname = klass._get_directory_for_loading(filename, ext) File "/usr/lib/pymodules/python2.6/soya/__init__.py", line 171, in _get_directory_for_loading raise ValueError("Cannot find a %s named %s!" % (klass, filename)) ValueError: Cannot find a <class 'soya.Model'> named house! * Soya3D * Quit...

  Read the article

• How do I prevent a KActor from changing the orientation of its Z-Axis?

  - by Almo

  So I have an object that inherits from KActor that I would like to behave as a dynamic physics object, but I want its Z-Axis to remain upright, but very stiffly. I've tried the bStayUpright that triggers the "Stay Upright Spring". The problem is, it's a spring, and the object in question oscillates into position when I want it to remain oriented properly without wobbling. In the image above, the yellow block has fallen onto the gray box, and it is currently pivoting about the contact point as it tries to right itself. Should I be tweaking the StayUprightMaxTorque and StayUprightTorqueFactor parameters, or should I be using a Constraint of some sort?

  Read the article

• HLSL 5 interpolation issues

  - by metredigm

  I'm having issues with the depth components of my shadowmapping shaders. The shadow map rendering shader is fine, and works very well. The world rendering shader is more problematic. The only value which seems to definitely be off is the pixel's position from the light's perspective, which I pass in parallel to the position. struct Pixel { float4 position : SV_Position; float4 light_pos : TEXCOORD2; float3 normal : NORMAL; float2 texcoord : TEXCOORD; }; The reason that I used the semantic 'TEXCOORD2' on the light's pixel position is because I believe that the problem lies with Direct3D's interpolation of values between shaders, and I started trying random semantics and also forcing linear and noperspective interpolations. In the world rendering shader, I observed in the pixel shader that the Z value of light_pos was always extremely close to, but less than the W value. This resulted in a depth result of 0.999 or similar for every pixel. Here is the vertex shader code : struct Vertex { float3 position : POSITION; float3 normal : NORMAL; float2 texcoord : TEXCOORD; }; struct Pixel { float4 position : SV_Position; float4 light_pos : TEXCOORD2; float3 normal : NORMAL; float2 texcoord : TEXCOORD; }; cbuffer Camera : register (b0) { matrix world; matrix view; matrix projection; }; cbuffer Light : register (b1) { matrix light_world; matrix light_view; matrix light_projection; }; Pixel RenderVertexShader(Vertex input) { Pixel output; output.position = mul(float4(input.position, 1.0f), world); output.position = mul(output.position, view); output.position = mul(output.position, projection); output.world_pos = mul(float4(input.position, 1.0f), world); output.world_pos = mul(output.world_pos, light_view); output.world_pos = mul(output.world_pos, light_projection); output.texcoord = input.texcoord; output.normal = input.normal; return output; } I suspect interpolation to be the culprit, as I used the camera matrices in place of the light matrices in the vertex shader, and had the same problem. The problem is evident as both of the same vectors were passed to a pixel from the VS, but only one of them showed a change in the PS. I have already thoroughly debugged the matrices' validity, the cbuffers' validity, and the multiplicative validity. I'm very stumped and have been trying to solve this for quite some time. Misc info : The light projection matrix and the camera projection matrix are the same, generated from D3DXMatrixPerspectiveFovLH(), with an FOV of 60.0f * 3.141f / 180.0f, a near clipping plane of 0.1f, and a far clipping plane of 1000.0f. Any ideas on what is happening? (This is a repost from my question on Stack Overflow)

  Read the article

• OOP implementation of BUFFS and Stats. Suggestion

  - by Mattia Manzo Manzati

  I am developing an MMORPG server using NodeJS. I am not sure how to implement Buffs, i mean, equipped objects or used skills have effects on the Player() which has many Stats(), some of them have a max cap... Effects can change the Stat value, increasing or decreasing it by a value, a percentage or completly rewrite the value of the stat. After a while I have decided to create a base class for buffs, which can be hidden (if they are casted from an equipped object) or shown if they came from an ability (Spell). Anyway I need suggestion how to implement it, use an array for all active buffs for a stat and have a function calculate the value of the stat affected by buffs each time I need the value of the stat or...? Other more OOP's ways to do it? I have read this What's a way to implement a flexible buff/debuff system? but this implements only a percentage system, which buffs can only say "+10%, +20%, etc...", but I would love to have an hybrid system, which can have percentage values or static values (like WoW does), and using modifiers it's hard to implement, because modifiers refers to the current value of stat :/ Thanks for suggestions :)

  Read the article

• Rotation of viewplatform in Java3D

  - by user29163

  I have just started with Java3D programming. I thought I had built up some basic intuition about how the scene graph works, but something that should work, does not work. I made a simple program for rotating a pyramid around the y-axis. This was done just by adding a RotationInterpolator R to the TransformGroup above the pyramid. Then I thought hey, can I now remove the RotationInterpolator from this TransformGroup, then add it to the TransformGroup above my ViewPlatform leaf. This should work if I have understood how things work. Adding the RotationInterpolator to this TransformGroup, should make the children of this TransformGroup rotate, and the ViewingPlatform is a child of the TransformGroup. Any ideas on where my reasoning is flawed? Here is the code for setting up the universe, and the view branchgroup. import java.awt.*; import java.awt.event.*; import javax.media.j3d.*; import javax.vecmath.*; public class UniverseBuilder { // User-specified canvas Canvas3D canvas; // Scene graph elements to which the user may want access VirtualUniverse universe; Locale locale; TransformGroup vpTrans; View view; public UniverseBuilder(Canvas3D c) { this.canvas = c; // Establish a virtual universe that has a single // hi-res Locale universe = new VirtualUniverse(); locale = new Locale(universe); // Create a PhysicalBody and PhysicalEnvironment object PhysicalBody body = new PhysicalBody(); PhysicalEnvironment environment = new PhysicalEnvironment(); // Create a View and attach the Canvas3D and the physical // body and environment to the view. view = new View(); view.addCanvas3D(c); view.setPhysicalBody(body); view.setPhysicalEnvironment(environment); // Create a BranchGroup node for the view platform BranchGroup vpRoot = new BranchGroup(); // Create a ViewPlatform object, and its associated // TransformGroup object, and attach it to the root of the // subgraph. Attach the view to the view platform. Transform3D t = new Transform3D(); Transform3D s = new Transform3D(); t.set(new Vector3f(0.0f, 0.0f, 10.0f)); t.rotX(-Math.PI/4); s.set(new Vector3f(0.0f, 0.0f, 10.0f)); //forandre verdier her for å endre viewing position t.mul(s); ViewPlatform vp = new ViewPlatform(); vpTrans = new TransformGroup(t); vpTrans.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE); // Rotator stuff Transform3D yAxis = new Transform3D(); //yAxis.rotY(Math.PI/2); Alpha rotationAlpha = new Alpha( -1, Alpha.INCREASING_ENABLE, 0, 0,4000, 0, 0, 0, 0, 0); RotationInterpolator rotator = new RotationInterpolator( rotationAlpha, vpTrans, yAxis, 0.0f, (float) Math.PI*2.0f); RotationInterpolator rotator2 = new RotationInterpolator( rotationAlpha, vpTrans); BoundingSphere bounds = new BoundingSphere(new Point3d(0.0,0.0,0.0), 1000.0); rotator.setSchedulingBounds(bounds); vpTrans.addChild(rotator); vpTrans.addChild(vp); vpRoot.addChild(vpTrans); view.attachViewPlatform(vp); // Attach the branch graph to the universe, via the // Locale. The scene graph is now live! locale.addBranchGraph(vpRoot); } public void addBranchGraph(BranchGroup bg) { locale.addBranchGraph(bg); } }

  Read the article

• Point Light Soft Shadows

  - by notabene

  How to implement soft shadows for omni directional (point) light. We use typical shadow mapping technique. Depth is rendered to texture cube and addresing is pretty simple then. Just using vector from light to fragments world position. It works perfectly. Until you want soft shadows. In our engine we use PCSS technique for spot lights. But for point light there begins troubles. How to sample in 3D? I developed technique when orthonormal basis is created from a direction and upvector (0,1,0). And then multiply sampling vector (something like this (1.0,i/depthMapSize,j/depthMapSize) with this basis. But this (of course :)) looks pretty bad for vectors near (0,1,0) and (0,-1,0). I will appreciate any help on this.

  Read the article

• Import 3ds into JMonkeyEngine 3

  - by Yanick Rochon

  I have asked this question on SO, but I think it will be more suitable here. Basically, we are trying to import an animated character body (with skeleton) from 3D Studio Max to JMonkeyEngine 3, but while we succeeded at importing some animations, we cannot seem to export the skeleton to .skeleton.xml using OgreXML format. Since OgreXML seems to be the favored way to import models into JME, we dropped .obj files and such. Any help appreciated.

  Read the article

• Need to make animation whereby the character shatters into a bunch of pieces

  - by theprojectabot

  I would like to take a 3d character model, cut out a bunch of shapes (or a bunch of triangles in the shape of the pieces I want) and then have the pieces separate from each other at the beginning of the animation and fall apart with gravity so it looks like the model is falling apart in shattered pieces. Is there a way to run a script on a mesh, cut out these pieces, instantiate all of them as separate models and then run gravity on them during the simulation?

  Read the article

• Numbers not adding up? (What am I not understanding here?) [closed]

  - by Milo

  I have the following output: Short version: The last numbers on the S= lines increase by H and SHOULD theoretically be linearly decreasing, ex: -285,-290,-295...but the fourth one jumps to -252. Yet, every other number is linearly increasing. Why is that and how could I fix that? To explain the numbers, it comes from slider value changed. I have a slider whose value is used to generate the float on the next line. Everything should be growing linearly here. This value is used to determine the size of a flow layout and it is also used in conjunction with a scrollbar. But basically I have a background for the flow layout and that number is the start location for rendering it. The numbers should linearly change to create a smooth transition but when that one jumps, it looks weird on screen and I dont understand why the numbers are jumping every X slider value changes. Mathematically what could be causing this? Here is the code for rendering the background and the function that is called when value changes: void LobbyTableManager::renderBG( GraphicsContext* g, agui::Rectangle& absRect, agui::Rectangle& childRect ) { float scale = 0.35f; int w = m_bgSprite->getWidth() * getTableScale() * scale; int h = m_bgSprite->getHeight() * getTableScale() * scale; int numX = ceil(absRect.getWidth() / (float)w) + 2; int numY = ceil(absRect.getHeight() / (float)h) + 2; int startY = childRect.getY(); int numAttempts = 0; while(startY + h < absRect.getY() && numAttempts < 1000) { startY += h; if(moo) { std::cout << startY << ","; } numAttempts++; } g->holdDrawing(); for(int i = 0; i < numX; ++i) { for(int j = 0; j < numY; ++j) { g->drawScaledSprite(m_bgSprite,0,0,m_bgSprite->getWidth(),m_bgSprite->getHeight(), absRect.getX() + (i * w) + (offsetX),absRect.getY() + (j * h) + startY,w,h,0); } } g->unholdDrawing(); g->setClippingRect(cx,cy,cw,ch); } void LobbyTableManager::setTableScale( float scale ) { scale += 0.3f; scale *= 2.0f; float scrollRel = m_vScroll->getRelativeValue(); setScale(scale); rescaleTables(); resizeFlow(); updateScrollBars(); float newVal = scrollRel * m_vScroll->getMaxValue(); m_vScroll->setValue(newVal); } void LobbyTableManager::valueChanged( agui::VScrollBar* source,int val ) { m_flow->setLocation(0,-val); } Any insight on mathematically why the anomaly might happen every Nth time would be helpful. I just dont understand why if every number linearly increates it jumps from -295 to -252! Thanks

  Read the article

• Whole map design vs. tiles array design

  - by Mikalichov

  I am working on a 2D RPG, which will feature the usual dungeon/town maps (pre-generated). I am using tiles, that I will then combine to make the maps. My original plan was to assemble the tiles using Photoshop, or some other graphic program, in order to have one bigger picture that I could then use as a map. However, I have read on several places people talking about how they used arrays to build their map in the engine (so you give an array of x tiles to your engine, and it assemble them as a map). I can understand how it's done, but it seems a lot more complicated to implement, and I can't see obvious avantages. What is the most common method, and what are advantages/disadvantages of each?

  Read the article

• Issues implementing arcball viewer

  - by Pris

  My scene has a simple cube, and a camera built with the lookAt function (I'm using OpenGL). The scene renders fine, and I'm sure I have my model/view/projection matrices set up correctly. Now I'm trying to implement arcball rotation for my camera, but I'm having some trouble. I've got it down to calculating the angle/axis rotation for a virtual sphere in normalized screen coordinates. That means when I move my mouse left to right, I get an angle around the Y axis... and moving my mouse up/down will get me an angle about X. I'm not sure where to go from here -- what do I need to do with my axis so I can apply the angle to simulate camera rotation about its viewpoint? If I try directly applying the axis/angle rotation the camera/view transform I get what you'd expect. The view is rotated about the world axes which the mouse moving over the virtual sphere on the screen corresponds to. So if I move the mouse up/down the view rotates about the world's X axis (what I get reminds me of a first-person view)... but this isn't what I want. I think I need the axis I get to be transformed so it passes through the camera viewpoint and is oriented correct in reference to the camera... but I don't know if that's right or how to do that.

  Read the article

• object detection in bitmmap javacanvas

  - by user1538127

  i want to detect clicks on canvas elements which are drawn using paths. so far i have think of to store elements path in javascript data structure and then check the cordinates of hits which matches the elements cordinates. i belive there is algorithm already for thins kind o cordinate search. rendering each of element path and checking the hits would be inefficient when elements number is larger. can anyone point on me that?

  Read the article

• Continuous Collision Detection Techniques

  - by Griffin

  I know there are quite a few continuous collision detection algorithms out there , but I can't find a list or summary of different 2D techniques; only tutorials on specific algorithms. What techniques are out there for calculating when different 2D bodies will collide and what are the advantages / disadvantages of each? I say techniques and not algorithms because I have not yet decided on how I will store different polygons which might be concave or even have holes. I plan to make a decision on this based on what the algorithm requires (for instance if an algorithm breaks down a polygon into triangles or convex shapes I will simply store the polygon data in this form).

  Read the article

• How do i make a minecraft server mod? [closed]

  - by Simon

  Possible Duplicate: Mods for Minecraft Server - how does it work? I have made some minecraft client mods, but i've started a server a mounth ago and i want to make a mod for it, but i cant find any tutorial on the internet. How can then the other guys making those mods for minecraft server know how they are going to do? Do they try forward as i tryed or are they doing something else. I would be glad if someone could tell me how to do or find tutorials for me, couse I have tryed to find them in nearly a week of searching. But i guess im searching at the wrong spot of internet, what do i know :o

  Read the article

• How to deal with animated doors in isometric tiles

  - by George Profenza

  I've got a tricky issue I'm not sure how to tackle best: I have an animated tile of a door. When it's closed it should be sorted one way, but when it's openend it will need to be sorted a different way, as it belonging to a different(neighbouring tile). Here's the door closed: and the door opened: I imagine it would be possible to override the sorting system for such tiles and adjust the sorting based on the frame, but it feels a bit hacky. Has anyone encountered a similar scenario ? Any elegant solutions ?

  Read the article

• Why my collision detection is not accurate?

  - by optimisez

  After trying and trying, I still cannot understand why the leg of character exceeds the wall but no clipping issue when I hit the wall from below. How should I fix it to make him standstill on the wall? void initPlayer() { // Create texture. hr = D3DXCreateTextureFromFileEx(d3dDevice, "player.png", 169, 44, D3DX_DEFAULT, NULL, D3DFMT_A8R8G8B8, D3DPOOL_MANAGED, D3DX_DEFAULT, D3DX_DEFAULT, D3DCOLOR_XRGB(255, 255, 255), NULL, NULL, &player); playerRect.left = playerRect.top = 0; playerRect.right = 29; playerRect.bottom = 36; playerDest.X = 0; playerDest.Y = 564; playerDest.length = playerRect.right - playerRect.left; playerDest.height = playerRect.bottom - playerRect.top; } void initBox() { hr = D3DXCreateTextureFromFileEx(d3dDevice, "brock.png", 330, 132, D3DX_DEFAULT, NULL, D3DFMT_A8R8G8B8, D3DPOOL_MANAGED, D3DX_DEFAULT, D3DX_DEFAULT, D3DCOLOR_XRGB(255, 255, 255), NULL, NULL, &box); boxRect.left = 33; boxRect.top = 0; boxRect.right = 63; boxRect.bottom = 30; boxDest.X = boxDest.Y = 300; boxDest.length = boxRect.right - boxRect.left; boxDest.height = boxRect.bottom - boxRect.top; } bool spriteCollide(Entity player, Entity target) { float left1, left2; float right1, right2; float top1, top2; float bottom1, bottom2; left1 = player.X; left2 = target.X; right1 = player.X + player.length; right2 = target.X + target.length; top1 = player.Y; top2 = target.Y; bottom1 = player.Y + player.height; bottom2 = target.Y + target.height; if (bottom1 < top2) return false; if (top1 > bottom2) return false; if (right1 < left2) return false; if (left1 > right2) return false; return true; } void collideWithBox() { if ( spriteCollide(playerDest, boxDest) && keyArr[VK_UP]) //playerDest.Y += 50; playerDest.Y = boxDest.Y + boxDest.height; else if ( spriteCollide(playerDest, boxDest) && !keyArr[VK_UP]) playerDest.Y = boxDest.Y - boxDest.height; }

  Read the article

< Previous Page | 305 306 307 308 309 310 311 312 313 314 315 316  | Next Page >