Search Results

Search found 15591 results on 624 pages for 'problems'.

Page 311/624 | < Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >

• Monitor does not work past certain resolution.

  - by Steve Stifler

  I have a Macbook 5.1 with Snow Leopard, and a Samsung SyncMaster 2253BW that I use for an external monitor. I connect it to my laptop via a DVI-to-MiniDisplayPort adapter. Whenever I try to set the resolution of the monitor to 1680x1050, its maximum resolution (at least the only one that fills the entire screen), the screen flickers once or twice before claiming there is no source attached. I've had this issue since the first time I tried to connect the two, however for some reason for a brief period in time the monitor would successfully display at full resolution. All lower resolutions work fine too, it's just at 1680x1050 that the problems occur. Any ideas as to why this is happening? Thanks.

  Read the article

• Need advice concerning Feature Based Development when knowledge DB is involved

  - by voroninp

  We develop BackOffice application which is used to edit our knowledge DB. Now our main product's development team is shifting to the feature based development and we need to support several DB's with not identical data schemes. (DS changes slightly from DB to DB) The information from knowledge Db is extracted by the script and then is distributed to the clients. We also need to support merging these DB's. We now analyze pros and cons of different approaches. We discuss this one: One working DB (WDB) with one DB for each feature branch (FDB). The approved data is moved from WDB to FDB. So we need to support only one script for each branch. This script will extract data from corresponding FDB. Nevertheless we are to code the differences between FDBs and WDB manually. May be some automatic mapping tools exist? I also wish to know whether classic solutions to the alike problems already exist. Can anyone share the best practices for this case?

  Read the article

• Input prediction and server re-simultaion

  - by Lope

  I have read plenty of articles about multiplayer principles and I have basic client-server system set up. There is however one thing I am not clear on. When player enters input, it is sent to the server and steps back in time to check if what should have happened at the time of that input and it resimulates the world again. So far everything's clear. All articles took shooting as an example, because it is easy to explain and it is pretty straightforward, but I believe movement is more complicated. Imagine following situation: 2 players move towards each other. A------<------B Player A stops halfway towards the collision point, but there is lag spike so the command does not arrive on the server for a second or so. Current state of the world on the server (and on the other clients as well) at the time when input arrives is this: [1]: -------AB------- The command arrives and we go back in time and re-simulate the world, the result is this: [2]: ---AB----------- Player A sees situation [2] which is correct, but the player is suddenly teleported from the position in [1] (center) to the position in [2]. Is this how this is supposed to work? Point of the client prediction is to give lagged player feeling that everything is smooth, not to ruin experience for other players. Alternative is to discard timestamp on the player's input and handle it when it arrives on the server without going back in time. This, however, creates even more severe problems for lagged player (even if he is lagging just a bit)

  Read the article

• 64kb limit on the size of MSMQ Multicast Messages

  - by John Breakwell

  When Windows 2003 came out, Microsoft introduced the ability to broadcast messages to any machines that were listening back. All you had to do was send out a message on a particular port and IP address and any client that had set up a Multicast queue with matching port and IP address would get a copy. Since its introduction, there have been a couple of security vulnerabilities that needed to be removed: Microsoft Security Bulletin MS06-052 Vulnerability in Pragmatic General Multicast (PGM) Could Allow Remote Code Execution (919007) Microsoft Security Bulletin MS08-036 Vulnerabilities in Pragmatic General Multicast (PGM) could allow denial of service (950762) The second of these, MS08-036, was resolved through an undocumented change in functionality. Basically, a limit of 64kb was put on the maximum size of a message that could be broadcast using the Multicast method. Obviously this has caused a few problems for any existing MSMQ Multicast applications that expected to be able to send larger messages. A hotfix has been developed to resolve this problem. 961605 FIX: Multicast messages larger than 64 kilobytes (KB) are not delivered as expected by using Message Queuing 3.0 after security update MS08-036 is installed A registry change is required: Open the registry with Regedit Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RMCAST\Parameters\ Create a DWord called MaxpacketSize Set the value to the desired number of bytes. You can set it to a value between zero and 4MB. If you specify anything above 4MB, it will default to 64K. A reboot is needed after adding this value.

  Read the article

• How to make changes in linux maintence mode

  - by Jack

  I notice when Linux boots in maintenance mode the filesystem is read-only. Is there a way to change this, perhaps remounting as writable? An example of this being a problem is that I was unable to open vi because there were too many session files.... Not to mention it would be nice to actually fix problems.... What are you meant to be able to do if you can't make any changes to the filesystem? What kind of maintenance can be expected?

  Read the article

• BizTalk 2009 - How do I do t"HAT"?

  - by StuartBrierley

  In my previous life working with BizTalk Server 2004, I came to view HAT (the Health and Activity Tracking tool) as one of my first ports of call in the case of problems with any of our BizTalk solutions.  When you move to BizTalk Server 2009 it is quickly apparent that HAT is no longer with us. HAT was useful in BizTalk 2004 mainly as it provided developers and administrators with a number of useful queries and views of what was going on inside BizTalk at runtime; when and what type of messages were received and sent, what messages had been suspended, what orchestration were running or suspended, you could even follow the process flow of a message or orchestration to see what was going on. With BizTalk Server 2009 much of the functionality of HAT can now be found in the BizTalk Administration console.  Select a BizTalk Group and you will be shown the Group Hub Overview page.  This provides a number of default queries that replicate some of those found in the old HAT. You can also use the Group Hub page to create new queries.  These can then be saved and loaded in other Group Hub instances - useful for creating queries in development for later use in Test, Psuedo-Live and Live environments. In the next few posts I am going to look at some of the common queries that we might miss from HAT and recreate them (or something close) using the new query option. Messages - last 100 received Messages - last 100 sent Messages - last 50 suspended Service instances - last 100 I have yet to try the updated Admin-HAT-Console in anger, and after using old-HAT for so long it may take some getting uesd to, but so far I would say that moving the HAT functionality into the BizTalk Administration console was probably the correct way to go.  Having one tool as the place to look for the combined functionality on offer certainly seems to be the sensible option.

  Read the article

• How important is the uniqueness of your domain name?

  - by Corey

  I've finally come up with a domain name that I like and is available. The name is nonsensical and doesn't translate into anything meaningful in any language, as far as I know. It's something like "FOOBARite". (Don't steal that!) I'm wondering about a few search issues. Results-wise, searching for it in Google currently returns about 15k results, none of which are relevant (dead Twitter pages, various unpopular online handles, and botched french translations). However, Google starts off with a spelling suggestion, which removes a letter. ("Did you mean: FOOBARit?") That returns about 250k results for several different and unrelated websites/organizations by that name. One is some technology provider, another is a sign-language organization, another is the name of a font... None of them seem particularly popular, there's not that much activity on any of those pages. Anyway, the two are pronounced differently, they're just a letter off. Should I go with my idea or is this one-letter variation going to cause me problems? If my site becomes ranked well enough, will Google's spelling suggestion go away? I don't want users to search for my site name and be told they've spelled it wrong.

  Read the article

• Usb stick too slow to benchmark?

  - by user85340

  I have a Core 2 Duo [email protected] with 3GB RAM. After some time using XUbuntu 10.10 on an 8GB stick I decided to switch to 12.04 and put it onto a 32GB stick (Transcend). I use an EXT4 with no journalling, noatime etc set. /tmp and /run is using tmpfs. And it is REALLY slow. MUCH slower than the old Xubuntu on the 8GB stick. Starting takes minutes, all applications "fade" because they respond too slow. I first thought that the NVidia graphics card is responsible for this, because there seem to be some known problems with that. Doing the adjustment (uncheck the sync checkbox) did not help. I believe the root cause is that the access to the USB stick is extremely slow. Running the read benchmark of the disk utility then brought the message "disk is too slow to benchmark"! BUT: When I do the same benchmark with the live CD I get around 20MB read performance and have a very responsive system! So how can I find out what is going one here?

  Read the article

• Can't open Control Panel or IE

  - by Josh

  I have a XP computer where when ever I try to open Control Panel nothing happens, nothing flashes on the screen. Same thing with Internet Explorer. I've scanned the computer with Malwarebytes and Avast, Malwaresbytes found some Adware which it removed without problems. Avast found nothing. I looked at the running processes with Process Explorer, nothing malicious running. And looked at a Process Monitor output when I tried to run IE, nothing obviously wrong. The process just decides to exit. What can I try next? I would suspect corrupt IE install but Control Panel doesn't work either. UPDATE: Nether work in Safe Mode under the user account. (only 1 user on the computer) But in Safe Mode, under the built in Administrator account, they work. So what ever is broken, is only broken in the one account. Anything under the HKCU registry key that could break this?

  Read the article

• Shuttle FB51 mobo does not boot with external USB drive attached [closed]

  - by user127236

  I am repurposing an old Alienware desktop as a home media server. The PC is based on the Shuttle FB51 motherboard. The BIOS is a Phoenix Version 6.00 PG, release date 12/16/2002. I have loaded Ubuntu 12.04 LTS on the internal hard drive. I am using a Western Digital WD Elements 1.5 TB USB 2.0 Desktop External Hard Drive for media storage. When the external drive is plugged in and the PC is powered on, it freezes very early in the BIOS self-test, even before it begins the memory test. If I unplug the drive, the self-test proceeds without further problems. I can plug the USB drive back in when the self-test is complete, and Ubuntu will boot and find the external drive normally. I've tried several changes to the BIOS setup without finding a cure for the boot issue. Any assistance gratefully accepted. JGB

  Read the article

• What is causing my internet to be slow on one laptop but not the other and only at a distance?

  - by Matt Case

  I have a newer laptop, purchased within the last year (acer aspire 7740). This laptop does not have any problem connecting to wireless networks and indicates that the signal strength is excellent on most of the wireless networks I connect to. When the laptop is within 10 feet of my wireless router it gets 30 down 10 up. When it is farther away than 10 feet it will be lucky to get 3 down and 1 up. I also have an older laptop, purchased in 2005, that has no problems at all at the same range. None of my phones, gaming consoles or tablets have this problem. I am beginning to think that the problem must be some hardware defect with the wireless card. I can provide additional information if needed. Just thought I'd check to see what others thought because I've been working on computers my whole life and have never heard of this happening. I have also tried to change the channels on my wireless router and have had no success with this idea.

  Read the article

• Twinview broken on upgrade to ubuntu 10.10

  - by mapkyca

  I have been on 9.10 for over a year on the grounds that if it ain't broke, don't fix it. However, I had a spare weekend and figured it was probably about time... I performed an upgrade to 10.4, and everything seemed to proceed smoothly, so I took the plunge and went for 10.10. Disaster. My twinview Nvidia display which had been working perfectly is now broken. On boot everything seems fine, but when X starts and the second monitor springs into life the primary winks out and switches off - almost as if its been put into an unsupported display mode. The system seems to think there's a second monitor - the nvidia logo is split across the two screens, but it can't seem to start. Things I've tried: Swapping the monitors (one is older than the other, and its definitely the port not the actual monitor) Rolling back to an old Xorg conf from prior to the upgrade Installing a non-beta driver direct from Nvidia (this seems to start both monitors but then apparently stops boot and causes the second display to 'wink'. Twinview seems non-functional, both displays are mirrors) Disabling EDID Disabling twinview, logging in and attempting to use the Nvidia config to re-detect the monitors (second monitor is falsely detected and won't go higher than 1024x768. Selecting 'apply' causes one screen to go blank and the other to display garbage) googling for about 5 hours looking for similar problems, none of the offered solutions seemed to work I'm at a loss, and it is looking very much like I'm going to have to go through a time consuming reinstall to downgrade back to the working 10.4. Any thoughts?

  Read the article

• Windows 7 starter will not shutdown or logoff

  - by richzilla

  Im having some problems with a friends netbook (a dell mini 10). It will not shutdown or logoff via the usual route. Whenever the shutdown/logoff button is clicked, it will briefly freeze (maybe for only a second) and then do nothing. Ive tried shutting down manually via the command line using shutdown /p but all to no avail, it just defaults back to flashing cursor in the command prompt. There doesnt seem to be any mention of a similar problem on google so i was wondering if anyone else had any ideas. Thanks oh and its runnning windows 7 starter.

  Read the article

• Lots of files being used by blank web page. What are they?

  - by byronyasgur

  I am trying to optimise a website and I was using the network waterfall facility in Google Chrome. When I looked at the results there were lots of files which I didnt recognise. I first thought they might be something to do with Google Chrome itself, so I put a blank HTML file on my desktop and checked but there was nothing in the waterfall except the file itself. So I put a blank file on my server and I got the output below. What are all these files, are they all necessary, is this normal and do I need to be in any way concerned. My hosting provider has always been excellent in every regard that I'm aware of. My host is shared hosting, using cpanel and is based on a LAMP server. I also note that a couple of those file have problems but I have no idea how to fault find that or whether it's a concern. EDIT: I have cleared the cache so I don't think it's a browser cache issue.

  Read the article

• Advantages of Scala vs. Groovy with JAVA EE 6 Applications.

  - by JAVA EE Wannabe

  Please let me first emphasize that I am not looking for flare wars. I just want advices from people who have real experiences. I started learning JAVA EE 6 as real newbie and am having had time choosing what tools to use. First problem is what is the advantage of using Scala vs. Groovy with Java EE 6 apps over Java? I've seen on some blogs people mentioning you gonna write less code but as a newbie I don't know what other advantages and disadvantages are there. Second problem is Netbeans 6.9 or Helios 3.6.1? I realized that with eclipse I can easily mix EE 6 applications with Groovy or Scala without any problems (I only did this by displaying a String message from Scala and Groovy classes.). With Netbeans the only I can think of is having separate Java project libraries and using the jars in my web app. But also realize to the extent of my little knowledge Netbeans has better support for Java EE 6. Please need your expert advice. Thanks.

  Read the article

• Distributed Server Monitoring Solution

  - by MaterialEdge

  I belong to an independent IT firm that manages and maintains about 50 business clients networks, ranging from small 5 system networks to 200+ systems. Because we are unable to directly monitor each server at these locations (distributed over a very large area) on a regular basis I am looking for a method to monitor and alert us to any problems that may arise so that we can respond quickly with, hopefully, preventative measures. I'm not sure what solutions are available for this type of situation, but something that utilizes a central server at our business with all client servers sending alerts or logs to it for daily monitoring might work best. All these servers are running a Windows Server OS. In your opinion, what would be the best course of action to accomplish this?

  Read the article

• Cant access websites

  - by LiveEn

  Recently i have some problems accessing websites. When i try to access it says This webpage is not available. I tried accessing the site through FireFox, Internet Explorer and Chrome. I also tried with using a web proxy but still the same problem. This problem is only in my Desktop PC, all the websites works fine in my laptop Currently i cant access, yahoo.com download.com bing.com proxy.org daniweb.com aol.com and many forums I check with the host file but nothing is blocked in that. Can some one please suggest what is wrong?? Thanks

  Read the article

• How to secure Apache for shared hosting environment? (chrooting, avoid symlinking...)

  - by Alessio Periloso

  I'm having problems dealing with Apache configuration: the problem is that I want to limit each user to his own docroot (so, a chroot() would be what I'm looking for), but: Mod_chroot works only globally and not for each virtualhost: i have the users in a path like the following one /home/vhosts/xxxxx/domains/domain.tld/public_html (xxxxx is the user), and can't solve the problem chrooting /home/vhosts, because the users would still be allowed to see each other. Using apache-mod-itk would slow down the websites too much, and I'm not sure if it would solve anything Without using any of the previous two, I think the only thing left is avoiding symlinking, not allowing the users to link to something that doesn't belong to them. So, I think I'm going to follow the third point but... how to efficiently avoid symlinking while still keeping mod_rewrite working?! The php has already been chrooted with php-fpm, so my only concern is about Apache itself.

  Read the article

• Dns works, can ping, but cannot load web pages in browser

  - by user1224595

  Yesterday I changed routers, and my desktop computer started acting up. I could ping websites, and nslookup was able to resolve names to addresses, but neither chrome, firefox, nor ie could load any webpages. None of my other computers connected to the same wireless router have any problems. I connect my desktop to the router through a cheap wifi dongle. I did a wireshark capture of the browser request, and I have uploaded the pcap here. https://drive.google.com/file/d/0B7AsPdhWc-SwbTV0bUJLQXo4UUE/edit?usp=sharing One strange thing I noticed was the spamming of ssdp packets. I am not super familiar with networking, but it seems that it is not a problem with the router, as dns works, and so does dhcp (the desktop is assigned an address correctly). Any help would be appreciated.

  Read the article

• Plugged in, not charging&ndash;Windows 7

  - by Kelly Jones

  Just a quick post on something I ran into lately with my Dell Precision M4500 laptop (monster laptop!).  I noticed the little icon in the system tray for the power options was stating that it was “plugged in, not charging”.  I don’t know why it was stating this, but I quickly found a fix for it on the net. I found the fix in this forum on CNET.  Here’s the fix: In order to correct problems with the battery's power management software, follow the steps below. 1. Click Start and type device in the search field, then select Device Manager . 2. Expand the Batteries category. 3. Under the Batteries category, right-click the Microsoft ACPI Compliant Control Method Battery listing, and select Uninstall . WARNING: Do not remove the Microsoft AC Adapter driver or any other ACPI compliant driver. 4. On the Device Manager taskbar, click Scan for hardware changes . Alternately, select Action > Scan for hardware changes . Windows will scan your computer for hardware that doesn't have drivers installed, and will install the drivers needed to manage your battery's power. The notebook should now indicate that the battery is charging.   And it did work.

  Read the article

• EE vs Computer Science: Effect on Developers' Approaches, Styles?

  - by DarenW

  Are there any systematic differences between software developers (sw engineers, architect, whatever job title) with an electronics or other engineering background, compared to those who entered the profession through computer science? By electronics background, I mean an EE degree, or a self-taught electronics tinkerer, other types of engineers and experimental physicists. I'm wondering if coming into the software-making professions from a strong knowledge of flip flops, tristate buffers, clock edge rise times and so forth, usually leads to a distinct approach to problems, mindsets, or superior skills at certain specialties and lack of skills at others, when compared to the computer science types who are full of concepts like abstract data types, object orientation, database normalization, who speak of "closures" in programming languages - things that make little sense to the soldering iron crowd until they learn enough programming. The real world, I'm sure, offers a wild range of individual exceptions, but for the most part, can you say there are overall differences? Would these have hiring implications e.g. (to make up something) "never hire an electron wrangler to do database design"? Could knowing about any differences help job seekers find something appropriate more effectively? Or provide enlightenment or some practical advice for those who find themselves misfits in a particular job role? (Btw, I've never taken any computer science classes; my impression of exactly what they cover is fuzzy. I'm an electronics/physics/art type, myself.)

  Read the article

• Thoughts on Technical Opinions

  - by Joe Mayo

  Nearly every day, people send email from the C# Station contact form with feedback on the tutorial.  The overwhelming majority is positive and “Thank You” notes.  Some feedback identifies problems such as typos, grammatical errors, or a constructive explanation of an item that was confusing.  It’s pretty rare, but I even get emails that are not very nice at all – no big deal because it comes with the territory and is sometimes humorous.  Sometimes I get questions related to the content that is more of a general nature, referring to best practices or approaches. It’s these more general questions that are sometimes interesting because there’s often no right or wrong answer. There was a time when I was more opinionated about these general scenarios, but not so much anymore. Sure, people who are learning are wanting to know the “right” way to do something and general guidance is good to help them get started.  However, just because a certain practice is the way you or your clique does things, doesn’t mean that another approach is wrong.  These days, I think that a more open-minded approach when providing technical guidance is more constructive. By the way, to all the people who consistently send kind emails each day:  You’re very welcome. :) @JoeMayo

  Read the article

• How do you monitor a monitoring server?

  - by organicveggie

  So we run Groundworks (with Nagios) on CentOS to monitor our various servers and processes. I have it setup to automatically send emails and SMS texts when things reach a WARNING or CRITICAL state. Normally this works perfectly. However, twice we've had problems with Postfix on that server where Postfix decides to stop sending email. The most recent time lasted 4 days because none of us noticed. That leads me to a important question: how am I supposed to monitor my monitoring server?

  Read the article

• How to stay creative when going through tough emotional times (divorce, family death, etc)? [closed]

  - by gaearon

  Hi everyone. I believe this is not a duplicate of motivation question because I want to especially emphasize the emotional breakdown. You may conquer lack of motivation by working harder and getting through the dip, however this was not the case when I was separating with my girlfriend. I actually liked the project, it was (and it still is!) my first programming job at an amazing workplace and I wasn't being pressured in any way but I found myself absolutely unable to code, blankly staring at the screen, my thoughts disorganized, the feeling of emptiness all in my chest. I could perform some straightforward coding but anything that involves creative thinking, designing abstractions, solving new problems and, worst of all, fixing bugs in legacy code, completely wiped out my brain to the point I started avoiding work, which I never have done before. Coffee only used to make it worse. Eventually I got over that, and I remember the happy day I solved a problem elegantly and thought—hell, first time in a month! Thankfully the project wasn't top priority and I had the time to catch up. I wonder now, was there any other way to boost my productivity back then? I bet people would say I should've taken a break—and I think I really should have—but what if I needed the money? Didn't want to lose my job? Are there any ways to trick your brain into being creative despite emotional losses? From your experience, would it be worth talking to my boss, collegues?

  Read the article

• correct format for datetime appended to filename

  - by jhayes

  I'm trying to setup a batch file to execute a set of stored procs and dump the output to a timestamped text file. I'm having problems finding the correct format for the timestamp. Here is what I'm using osql.exe -S <server> -E -Q "EXEC <stored procedure> " -o "c:\filename_%date:~-0,10%_%time:~-0,10%.txt" The error I get is: Cannot open output file - x:\filename_Thu 06/25/_16:26:43.1.txt No such file or directory I can't find the documentation and I've played around with it but can't find the correct format.

  Read the article

< Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >