Search Results

Search found 15591 results on 624 pages for 'problems'.

Page 314/624 | < Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321  | Next Page >

  • Hardware for Capturing Packets

    - by Kevin
    One of my clients is a small school district in Texas. Like any school, they often have problems with network'd peripherals such as printers, et al. It would be nice to be able to simply "listen" to what the printer and PC are saying to each other (or not saying more importantly)... The problem is that I can't find old-style "hubs" anymore, and even if I could, it's not a long-term solution. All of the devices that I have found to replicate the purpose of a simple hub are either $100+ or are difficult to throw into a networking tool kit (aka my backpack)... Now that hubs are dead, what's the new low-cost standard for simple packet capture in the networking world?

    Read the article

  • Screen going black, further investigation reveals healthy ram and hard disk, and several kernel oops logs

    - by Virulan
    Six days ago, I went to go take a shower, and I suspended Ubuntu as usual, to save battery life. I came back, and the screen was black. REISUB and general fiddling around did nothing. Restarted, and still had nothing on the screen. Since then, this has happened several times, and the only fix is to 1) force shut laptop, 2) take out battery, 3) hold power button, 4) put battery back in, 5) boot. I have investigated further into the matter, doing a ram test and a hard disk check. Both turned out fine, but then my attention turned towards the error messages I was receiving upon bootup, the whole "System program problem detected" dealio. I did some digging and found four kernel oops logs in my /var/crash. What I can understand of them points to two things, 1) they are connected to my suspending problems, since there are four them (I have had four suspending crashes), and they both confirm that there was a issue with waking up from suspend, and 2) the crashes might have to do with Python (possibly could be jumping to conclusions), since mentions of Python are peppered throughout the logs. At this point, I am unsure of how to continue, and I have come here for help. Is there any way I can fix this? Should I start by uploading the logs here?

    Read the article

  • ubuntu 10.04: boot error for custom compiled kernel - gave up wating for root device

    - by atharva
    Hi, I have installed lucid on my Lenevo Laptop (Y 410 series , x86 platoform) and it is working fine. Now I have compiled kernel 2.6.37 from the downloaded from the kernel tree. I followed usual procedure of compileing kernel (make menuconfig,make. make modules etc). Then I created the initrd image using mkinitramfs and updated my grub using upadate grub command. Update-grub detects the initrd image of the compiled kernel. However when I boot from this kernel it gives me following error: Gave up waiting for root device. Common problems: -Boot args (cat /proc/cmdline) -Check rootdelay= (did the system wait long enough?) -Check root= (did the system wait for the right device?) -Missing modules (cat /proc/modules; ls /dev) ALERT! root=UUID=/... does not exist and then it falls onto initramfs prompt. I have tried following solutions discussed in different ubuntu forums: 1. disable uuid and point root=/dev/sda8 (sda8 is where my kernele image resides (both default kernel and compiled one) from /etc/default/grub 2. compile kernel using CONFIG_DEVTMPFS=y suggested here Still I am unable to boot from the compile kernel. Could someone please suggest me the solution ?

    Read the article

  • Rate of UDP packet loss over WLAN

    - by Martin
    While testing something with TFTP I noticed lots of timeouts (and slow speed as result) when I used my WLAN - and no problems when using a network cable. A quick test program sending/receiving UDP revealed that there are about 3-5% packets lost. While it's obvious that WLAN has to be less reliable than LAN, I have no knowledge what loss rates are considered 'normal' - and when there is a need to further investigate the network infrastructure. Are there 'typical' packet loss rates on WLAN (and other network technologies e.g. PowerLAN, WAN, ...? Thanks

    Read the article

  • Stop Windows 7 from installing critical updates

    - by Rico
    I have disabled Windows Update on Windows 7, but it still downloads and installs critical updates. As with Windows XP, these updates occasionally create problems. But in XP, once I disabled automatic updates, the OS did not override my settings and continue to download and install critical updates. After the most recent critical update to Windows 7, every time I boot up, the USB devices connected to a single port through 4-way hub don't install. I have to unplug the hub from the computer then plug it back in. Then the devices install. I can use System Recovery to solve the immediate problem, but I'd like to disable automatic updates entirely. Why does Windows 7 not respect my settings like Windows XP did?

    Read the article

  • Weird Screen while booting to install, while installing and after the install...and then the "panic occured" error

    - by Klyn
    I've decided to install ubuntu but neither ubuntu or any other linux distro won't even get to the desktop screen or work after getting there. On windows 8, everything is just fine. my new video card works perfectly and I have no problem with anything about it. then when I try to boot from ubuntu with wubi or with usb everything goes like this: 1) Grub screen...no problem at all, colors are just fine everything looks okay 2) and then linux boot screen...weird background color, over the backround there are vertical stripes of red-orange dots. but on the ubuntu logo and text, there are no dots at all! -I mean its shape is perfect- 3) desktop is about the start but * vertical stripes of red colored dots are all over the unity screen*. then when I click on ubuntu's menu, it usually switches to black screen saying something about "panic occured"...and then it restarts or it gives no respond at all. problems started after putting hd 6570 video card on my asus m5a78lm-lx video card which has amd phenom II X4 processor on it. I've searched to find something but there was no similar question that's why I'm almost sure it is kind of unique. again, I'm writing on Windows 8 right now and everything works and looks perfect. so far I've updated bios and anyone knows anything to solve this?

    Read the article

  • PC won't boot with 4 prong CPU connector connected. Motherboard or CPU dead - which one? Both?

    - by scrot
    In the middle of use, my computer shut down. I tried to turn it on but it maybe comes on for half a second, shuts down, then flickers again very quickly about 2 seconds later before giving up completely. So I took everything apart and nailed it down to the power supply, the mobo, or the CPU. I had an extra old power supply around, hooked that up and it had the same problems, so that can't be it. When the 4 prong CPU connector is not connected, the motherboard 'functions' in that it stays on and runs the heat sink etc. Throw in the 4 prong connector and that's when it doesn't stay on. So it must be the CPU, right? Motherboard: ASUS P6X58D CPU: Intel i7-920 Bot are under warranty (supposedly) - should I get both replaced or what?

    Read the article

  • Installing then Running VMware or VirtualBox causes my Windows 7 PC to not boot up after shutting down?

    - by Rick
    At my work I am provided with a Windows 7 PC but I am a programmer and Windows gives me problems for doing some types of development so I want to have a virtual Ubuntu Linux machine that I can use for some things. However, I have tried with both VirtualBox and VMware and I am able to install the latest Ubuntu and run it but then when I try to restart / start the computer after it was shut down, I am unable to boot into Windows normally and end up having to go into Safe mode and then use the system restore to get my system back up and working. I am puzzled by this and would appreciate if anyone has any idea why it would be doing this, I have searched on this but can't find anything. Thanks for any advice

    Read the article

  • Twitter Tuesday - Top 10 @ArchBeat Tweets - August 12-18, 2014

    - by Bob Rhubart-Oracle
    Man in gray hat: "You know, more than three thousand people follow @OTNArchBeat on Twitter. I wonder which tweets were the most popular over the last seven days." Man in brown hat: "Shut up! I think I see a UFO!" Man in gray hat: "That's OK. I'll just read this blog post." RT @java: "Programmers are creative people and typically delight in contriving clever ways to solve problems." -Casimir Saternos in @OracleJavaMag Aug 18, 2014 at 12:54 PM The Offer Still Stands: Produce your own episode of the OTN ArchBeat Podcast. Click for details. Aug 13, 2014 at 02:03 PM Binge-Ready! Watch the Top 10 OTN ArchBeat Videos featuring @stewartbryson @stenvesterli @gurcanorhan Aug 13, 2014 at 11:49 AM Oracle Announces First Java 9 Features | InfoQ Aug 18, 2014 at 12:20 PM Getting Started wit the #Coherence Memcached Adaptor | David Felcey Aug 18, 2014 at 10:19 AM #WebLogic Data Source Connection Labeling | Steve Felts Aug 14, 2014 at 10:03 AM How to introduce #DevOps into a moribund corporate culture | ZDNet Aug 15, 2014 at 11:23 AM Sample Chapter: Installing Oracle #WebLogic Server 12c and Using the Management Tools | Sam Alapati Aug 14, 2014 at 11:09 AM Building a Responsive #WebCenter Portal Application | @JayJayZheng Aug 12, 2014 at 11:04 AM #OEM12c Cloud Control authorization with Active Directory | Jeroen Gouma Aug 14, 2014 at 10:16 AM

    Read the article

  • Movie colors are off on ubuntu

    - by chris
    I've been playing with a new SLR that also happens to record movies. When I try to view a movie using Movie Player, it plays fine, and the sound is there, but the colors are off - green grass is purple, and my golden retriever is a blue retriever. VLC reports that the file is broken, offers to repair it, and plays it with the same problem. The same file plays fine under WinXP with both Media Player and Quicktime, and with no problems under MacOS also with Quicktime. What's the problem, and how can I fix it?

    Read the article

  • nginx: override global ssl directives for specific servers

    - by alkar
    In my configuration I have placed the ssl_* directives inside the http block and have been using a wildcard certificate certified by a custom CA without any problems. However, I now want to use a new certificate for a new subdomain (a server), that has been certified by a recognized CA. Let's say the TLD is blah.org. I want my custom certificate with CN *.blah.org to be used on all domains except for new.blah.org that will use its own certificate/key pair of files with CN new.blah.org. How would one do that? Adding new ssl_* directives inside the server block doesn't seem to override the global settings.

    Read the article

  • Multiple monitors on ATI Radeon HD 5450 1GB DDR2 (Brand: Sapphire)

    - by Robert
    From other posts here, I understand that it might be possible to use up to 3 monitors on this card. My understanding (from the other posts here as well) is that since I have a HDMI output, I do not have a 'DisplayPort', right ? Mine has indeed 3 ports: DVI, HDMI and VGA. Can I have dual-monitor using both the HDMI and DVI ports simulataneously (I am not looking for Eyefinity, but simply extended desktop). Currently I am using dual monitor with DVI and VGA but will replace my 17 inches next week with a new (larger) one that has both VGA and DVI, so I intend to use both monitors connected digitally. I intend to purchase a cable ''HDMI to DVI''(MM) to do so on the second monitor. Optimal resolution on the one I intend to keep (22 inches) : 1680 x 1050, primary monitor. New one (24 inches) has an optimal resolution of 1920 x 1080. Am I running for problems ? Thanks, Rob

    Read the article

  • Dim (NEARLY blank) laptop screen, secondary screen works - why?

    - by LIttle Ancient Forest Kami
    My laptop screen is (almost) black while my secondary screen is fine. I believe it to be backlight / brightness related. Problem description it starts when I start the laptop system loads and works fine, just screen has problems I can see the screen though very faintly / dimly - it's hard to see anything which ain't very white e.g. starting screen has big Thinkpad logo in white, large font - I can see it, though very dimly second screen works very well Official backligtht debugging: using acpi setting as prescribed there for Thinkpads didn't help I can see an entry in /sys/class/backlight/ and it changes when I press hotkeys for brightness (current backlight power for instance goes up or down) acpi-off didn't helpm neither did acpi_backlight=vendor Hardware data Laptop is Thinkpad Edge with glossy screen. 4 processors, 2 cores, exemplary CPU data from cat /proc/cpuinfo reports Genuine Intel i5 (M 480 @ 2.67GHz). OS is Ubuntu Lucid, 10.04 LTS, 64-bit, with Linux generic kernel (2.6.32-44) and GNOME 2.32.2 (though I doubt there lies the problem). $ lspci | grep VGA 01:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series] $ lshw -C display *-display description: VGA compatible controller product: M92 [Mobility Radeon HD 4500 Series] vendor: ATI Technologies Inc physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:33 memory:c0000000-dfffffff(prefetchable) ioport:2000(size=256) memory:f0300000-f030ffff memory:f0320000-f033ffff(prefetchable) Driver I was NOT running any proprietary drivers, just checked with "Hardware drivers". There is one for ATI that is suggested there, though I didn't need it so far. UPDATE: changing the driver to proprietary one (ATI/AMD FGLRX) didn't help. Tried and failed Resetting / running on power or battery / charging / getting rid of static electricity / warming up *doesn't help* This is NOT a blank-screen problem, at least it isn't following official Ubuntu black-screen diagnostics - I can see my screen, though barely. What I will try next: - check last updates I've made - IIRC I am running on nomodeset already, but will verify this Any ideas how to proceed best? What is most probable cause?

    Read the article

  • Permissions issue: how can Apache access files in my Home directory?

    - by richzilla
    I know file permissions have been covered on here before, but im struggling to get my head around the concept for my scenario. I created the files on an old ubuntu installation. Ive copied the files into my new ubuntu installation and put them in my webroot. When i attempt to run the files (theyre PHP files) i get an error relating to permissions in an attempt to fix this, i assumed that they must still be owned by the previous owner, so i ran chown -R on the directory, with my username as an argument, in order to take ownership of all of the files in the directory. It should be noted that the usernames between new and old ubuntu installations were the same. When i attempt to run the files again, same problem: 500 error due to permissions problems. Can anyone tell me what other steps i should take? The webroot for my apache installation is inside my home folder. If i create new files in my webroot, they also work as expected, its only the old files that are causing the problem.

    Read the article

  • GRUB2 stuck at rescue console, showing "unknown filesystem" for all partitions

    - by AndiDog
    I installed Ubuntu 12.04 on my external USB drive, where I have a 700GB NTFS partition followed by the new 6GB ext4 partition and a swap partition (all primary). The GRUB MBR is also installed to the external hard disk. Since my BIOS puts the external drive as first disk when booting, I removed my internal hard disk before installation in order to avoid ordering problems. Now when I boot from the external drive, GRUB is stuck at the rescue console with the error "unknown filesystem". grub rescue> ls (hd0) (hd0,msdos3) (hd0,msdos2) (hd0,msdos1) ls (hd0,<any of them>)/ gives me "unknown filesystem", thus also "insmod normal" GRUB doesn't seem to be able to read my Linux partition as you can see above?! How can I solve this? Additional info: bootinfoscript says (this is with the internal drive in again, but that does not make a difference): Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos2)/boot/grub on this drive. sdb1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sdb2: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb3: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info:

    Read the article

  • Protected flash video (requires HAL) on Gentoo

    - by Mala
    I am unable to play "protected" flash video, such as Amazon Prime Instant Video. From what I've read and uncovered, this seems to be due to a lack of HAL being installed on my computer. Confirmation that it is required for protected video can be seen towards the beginning of http://helpx.adobe.com/x-productkb/multi/flash-player-11-problems-playing.html However, hal is not in the gentoo portage tree, and in any case has been deprecated and replaced by udev. How can I go about getting Amazon Prime Instant Video to work again? I was considering grabbing the source from http://www.freedesktop.org/wiki/Software/hal but the links there won't load, and trying to install it from old ebuilds or from overlays which claim to still support it (e.g. kde-sunset) result in a compilation error: In file included from addon-generic-backlight.c:38:0: /usr/include/glib-2.0/glib/gmain.h:21:2: error: #error "Only <glib.h> can be included directly." Has anyone else solved this issue?

    Read the article

  • Resizing Windows 7 bootcamp partition

    - by Charlie
    I've installed Windows 7 on my Mac using bootcamp but stupidly only allocated it 25gb which isn't enough once I've installed Visual Studio and other stuff. I was able to shrink the Mac partition using whatever tool it is in Mac OS Snow Leopard but it wouldn't let me increase the windows partition so I rebooted into Windows to try it but am still having problems: I coudn't extend it using the disk management tool because the option is greyed out so I tried diskpart.exe but when I use the extend command with my partition selected it says: Virtual Disk Service error: There is not enough usable space for this operation. I've got 19.69gb of unallocated space though so am not sure why I'm having the problem. I don't want to have to wipe my Windows partition, any ideas?

    Read the article

  • Unidentified network: How to configure TCP/IPv4 for Win7?

    - by Zolomon
    When I try to connect to internet I keep getting the error "Unidentified network". I've tried numerous attempts at restoring access without success. IP release, flushing DNS cache, reinstalling NIC, reactivating NIC, resetting router and so on... I've read several times that it's my default gateway that's wrong. Currently I've had automatic IP/DNS configuration set without any problems, and then it stopped working for some reason. Anyone know how I specify the IP? My subnetmask is 255.255.255.0, default gateway is 192.168.0.1 but I have no idea how to determine what IP I should set. I use a D-Link DIR-655 and other computers on the network have IPs like 192.168.0.194, next is 192.168.0.197. (I'm completely lost and am trying to cool down after two weekends of debugging filled with despair.)

    Read the article

  • Ubuntu 9.10 freezes when HDMI port is connected

    - by Felipe Hummel
    Hi, I have a Sony Vaio FW350 with a HDMI output. I'm trying to use it under Ubuntu 9.10 with a LG LCD monitor 21,5'. I've tried two approaches: Boot the laptop with the HDMI cable connected and monitor turned on. Result: LCD Monitor keeps turned on but the whole screen is black and Ubuntu do not seem to be initializing. Boot Ubuntu until the end. I then connect the HDMI cable into the Laptop. The mouse and the whole system freezes. In both cases the only way to turn off the laptop is holding the power button. I've looked around the internet for similar problems, but only found workarounds for the same problem with VGA input, not HDMI. I also tried to use metacity before connecting the cable, but still got the same result. Any hints?

    Read the article

  • Linux Log Viewer with Web interface

    - by user180039
    I have been asked at work to find a solution to one of our problems. We have several logs that customers need access to, because we don't want to give them direct access to the folder/share we are looking to implement a simple Web based solution that permits customers to login see a list of files they have permissions to and download the file. It would need to be able to setup permissions so User01 can see file01 and file03 and User02 can see file04 and file06, optimally all the files would be under the same folder, so permissions are based on files rather then based on folders. Anyone got any ideas Many Thanks

    Read the article

  • Beast / CRIME / Beach attack and stopping it

    - by user2143356
    I have read so much on all this but not entirely sure I understand what has gone on. Also, is this one, two or three problems? It looks to me like three, but it's all very confusing: Beast CRIME Beach It seems the solution may be to simply not use compression with HTTPS traffic (or is that just on one of them?) I use GZIP compression. Is that okay, or is that part of the problem? I also use Ubuntu 12.04 LTS Also, is non-HTTPS traffic okay? So after reading all the theory I just want the solution. I think this may be the solution, but can someone please confirm I have understood everything so I am not likely to suffer from this attack: SOLUTION: Use GZIP compression on HTTP traffic, but don't use any compression on HTTPS traffic

    Read the article

  • Issue with increasing the root partition from the swap

    - by user211761
    I have an issue with increase the size of my root partition. I have ElementaryOS Luna, and while installing it asked me how much space I want to use. I choosed 15 GB for it, because I want to use this as an alternative system. The issue is that after the installation was complete, I found out that my root partition is only 7 GB big, and SWAP is 8 GB which is useless cuz I have 8 GB of RAM. Now I want to shrink the swap and increase the size of my root partition, so I booted the LiveCD and used GParted. I shrinked the swap without any problems, but now I cant add that free space to any partition. I also turned Swap off. I would add a picture, but I need at least 10 reputation to post images ( Stupid ) Its also worth mentioning that in Gparted its showing my partition in a different way. I would post an image BUT I CANT, so I need to write it down. Its something like this [Pointing arrow down] /dev/sda4 Extended /dev/sda5 ntfs /dev/sda6 ext4 (Which is my main partition) /dev/sda7 linux-swap unallocated Picture:

    Read the article

  • What poor management decisions have you had to deal with?

    - by tombull89
    As a junior technician I've had to deal with (or will have to deal with) some problems in the past and only being a junior technician I don't have the confidence or respect from management staff to speak up. For instance, we're having a entirely new system. From Windows Server 2003/XP going to Windows Server 2008 R2/Windows 7/VMWare/Digital Signage and the current amount of time dedicated to the training of the IT support department currently stands at 0. They seem to think that all IT systems are the same and are going to get a bit of shock when I can't help them. I think there;s some UK legislation saying a school/business have to put money and time aside for training, but I'm not sure. What have you had to deal with?

    Read the article

  • Two routers, one off-site, same ISP-assigned static IP. A recipe for conflict?

    - by boost
    This is the situation I've inherited: There are two routers, one off-site. Both are connected to the ISP. The ISP assigns both of them the same static IP (or so it seems). Presumably, the network problems we're having are related to the idea that you can't have two instances of the same IP. So we rang up the folk off-site and told them to turn off the router. Now everything's working okay here. How do I get around this? Get another static IP? Figure out how to get the router to ask for a dynamic IP (as we're not using the static IP for anything)?

    Read the article

  • MariaDB, Galera, xtrabackup - do I need the binary log?

    - by bernhardrusch
    We are using a MariaDB Galera Cluster with 3 nodes. For the state transfer we are using xtrabackup. We have some problems with the binary logs - they got too big and crashed the server. We can remove them manually with the purge binary logs command, another way would be to set the expire_logs_days so they would expire. I now that we could use xtrabackup to backup the DB and use the binlog to get to some point in time. But do we really need it for Galera to work ?

    Read the article

< Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321  | Next Page >