Search Results

Search found 11077 results on 444 pages for 'no such ip'.

Page 315/444 | < Previous Page | 311 312 313 314 315 316 317 318 319 320 321 322  | Next Page >

• Setting up wifi router as a switch for Internet Connection Sharing

  - by William C

  Can my laptop with a 3G connection share its Internet via a Wifi router (Dlink DIR-615)? I turned Internet Connection Sharing on and Windows assigned 192.168.137.1 to my laptop's LAN adapter. Do I connect my laptop to the WAN port or to the LAN port of the router? What should I set as my router's IP address? Do I turn DHCP on my router on? Do I assign 192.168.137.x as static addresses on the other computers? If not, what? Is there anything else I need to set on my router? Thank you!

  Read the article

• rkhunter warns of inode change by no file modification date changes

  - by Nicholas Tolley Cottrell

  I have several systems running Centos 6 with rkhunter installed. I have a daily cron running rkhunter and reporting back via email. I very often get reports like: ---------------------- Start Rootkit Hunter Scan ---------------------- Warning: The file properties have changed: File: /sbin/fsck Current inode: 6029384 Stored inode: 6029326 Warning: The file properties have changed: File: /sbin/ip Current inode: 6029506 Stored inode: 6029343 Warning: The file properties have changed: File: /sbin/nologin Current inode: 6029443 Stored inode: 6029531 Warning: The file properties have changed: File: /bin/dmesg Current inode: 13369362 Stored inode: 13369366 From what I understand, rkhunter will usually report a changed hash and/or modification date on the scanned files to, so this leads me to think that there is no real change. My question: is there some other activity on the machine that could make the inode change (running ext4) or is this really yum making regular (~ once a week) changes to these files as part of normal security updates?

  Read the article

• Bind dns server in Solaris 10 and win xp clients

  - by stevecomptech

  Hi, Added this in zone db file, i am running solaris 10 _ldap._tcp.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.mydomain.com. SRV 0 0 88 dc.mydomain.com. _ldap._tcp.dc._msdcs.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.dc._msdcs.mydomain.com. SRV 0 0 88 host.mydomain.com. Now i get this error when i try to join win xp to the domain The query was for the SRV record for _ldap._tcp.dc._msdcs.mydomain.com The following domain controllers were identified by the query: host.mydomain.com Common causes of this error include: Host (A) records that map the name of the domain controller to its IP addresses are missing or contain incorrect addresses. Domain controllers registered in DNS are not connected to the network or are not running. What do i need to change in order my win xp join the domain

  Read the article

• Can't access LAN computers with SSH

  - by endolith

  I got a new Windows 7 machine, and was using VNC,SSH etc to connect to my Ubuntu machine, and it worked fine previously. Now it doesn't work if I use the machine's hostname or local IP, but if I use the DynDNS name, it works. I can also access it from my Android phone using the local hostname over SSH. If I try to connect with SSH to the hostname, it says "Host does not exist". VNC says "Failed to get server address". NX says "no address associated with name", and I don't see it in Windows' "Network" folder. I've rebooted everything. I've turned off Windows firewall. It was working fine a few days ago, but now it's not. How do I figure out what's blocking it?

  Read the article

• FTP script download from linux to windows

  - by user53864

  I'm using following FTP script on windows xp to download zip files from ubuntu cloud servers. A zip file is created every day on ubutnu servers and I will download it to windows via this ftp script. I run this script everyday manually as I have to edit the last line(mget /usr/backup_02-11-2010.Zip) of the script to match today's date. I want to edit this script so that it will download only today's zip file at the scheduled time without needing to edit it everyday, when scheduled. It's clear that date is appended to the zip files and is in the format dd-mm-yyyy. Need help... open server-ip-here username-here user-password-here lcd C:\Backup\files bin hash prompt mget /usr/backup_02-11-2010.zip

  Read the article

• Can we put random URL entries on DNS

  - by ring bearer

  Using microsoft DNS All/most of our local hosts ( with in ) are in following domain *.company.org So a host name will look like mymachine001.company.org Is it possible to set up wild card DNS entries of the form ? *.subd.company.com Note: The URL ends with .com, all other hosts so far ever set up in the DNS were of the format *.company.org what i am trying to achieve is the following. A user with in internal network types a url http://someprefix.subd.company.com in browser and enters. Since there is a wild card entry in DNS, the user gets routed to host mapped to *.subd.company.com in the DNS Note : at the same time, company.com has a public DNS entry and that is mapped to a physical IP in some other network (data center)

  Read the article

• How to route all traffic over site to site VPN tunnel?

  - by Hutch

  I have a site to site VPN configured between our main site (Site A) and a remote site (Site B). Site A is 10.60.0.0/16 Site B is 192.168.99.0/24 The firewall in Site B is a Juniper SSG running ScreenOS 6.3 and I'm using a route based VPN. The tunnel works perfectly in that from Site A you can reach 192.168.99.0 via the tunnel, and from Site B you can reach 10.60.0.0 via the tunnel. However, we want it so that if you're in Site B and want the Internet it goes via the firewall at Site A, and right now on the Juniper 0.0.0.0 has the ISP router as next hop. My understanding is that on the Juniper, I can set a route for the /32 public IP at our main site that the VPN tunnel connects to to the ISP router via ethernet0/0 (the SSG's external interface), and then modify the 0.0.0.0 route to use our main site firewall via tunnel.1 (the VPN tunnel). Not sure I've explained that so well but is my understanding correct? Thanks

  Read the article

• Changing shared printer settings to default to greyscale

  - by Chris

  My company has about 60 employees all running Windows Vista or 7 and a gigantic Minolta printer hooked up to an EFI Fiery Image Processor. We're burning about $300 a month in printer supplies alone. I'm trying to find a way to cause the printer to default to grayscale in order to save money. So far I've tried: Changing settings on the image processor Changing settings on the print server Looking through the Group Policy editor to see if I can find anything useful Creating a new printer on the print server and setting it to be grayscale only Adding the printer to my computer directly (through a TCP/IP port) and setting it to be greyscale only Has anybody successfully done this before? If so, how was it gone about? I don't expect anybody to know the specifics of my environment, I just not sure what the right direction is.

  Read the article

• Debian pure-ftpd, Restrict access

  - by durduvakis

  I am running Debian Wheezy, with ISPConfig 3, plus ModSecurity and I would like to restrict access to ftp to specific IP(s) globally (not to specific ftp users only), that can be either 127.0.0.1 or one I would manually add later. I would also like to completely disable ftp access from the web, but allow only from ftp-client software (if that is possible). The idea of closing firewall ports is not what I want. I know I can do this setting some firewall rule though, but that is not what I currently need. I have managed to do this for example on phpmyadmin inside it's .conf file, but unfortunately I cannot find any configuration to alter for pure-ftpd in my system. Restricting web-ftp access maybe possible by adding some rule in apache2 conf, but I am not sure how to write such a rule. Thanks to everyone that can help cheers

  Read the article

• Apply SetEnvIf after Apache RewriteRule

  - by coneybeare

  I have a working apache rewrite rule: RewriteCond %{HTTP_HOST} ^.*foo.com RewriteRule (.*) http://bar.com$1 [R=301,QSA,L] and some working dontlog SetEnvIfs: SetEnvIf Request_URI "^/server-status$" dontlog SetEnvIf Request_URI "^/home/ping$" dontlog SetEnvIf Request_URI "^/haproxy-status$" dontlog SetEnvIf User-Agent ".*internal dummy connection.*" dontlog CustomLog /var/log/apache2/access.log combined env=!dontlog but I can't figure out how to stop the RewriteRule from logging a duplicate line. foo.com and bar.com are both on the same machine. I would expect this rule to work, but it did not: SetEnvIf Host "foo.com" dontlog I still get duplicates in the Apache Log: 10.250.18.97 - - [06/Apr/2012:16:57:12 +0000] "GET / HTTP/1.1" 200 732 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/534.55.3 (KHTML, like Gecko) Version/5.1.5 Safari/534.55.3" 68.194.30.42 - - [06/Apr/2012:16:57:12 +0000] "GET / HTTP/1.1" 200 732 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/534.55.3 (KHTML, like Gecko) Version/5.1.5 Safari/534.55.3" .... where 10.250.18.97 is the server's IP. How can I prevent that RewriteRule from logging?

  Read the article

• MySQL will Stop working after being Started

  - by user115343

  i am new to a webserver thing. I use Centmin mod to install nginx + mariaDB to setup small wordpress blog,the first day it is ok,there are nice "hello world" on my box's IP,but today i have checked that mysql is stop working so i immediately start it again but it is stoped again after some minutes! i use this tutorial but still,it will stop after some period here is my log [root@rylai ~]# tail -f /var/log/mysqld.log 120326 16:19:05 [Note] Plugin 'PBXT_STATISTICS' is disabled. 120326 16:19:05 [Note] Plugin 'InnoDB' is disabled. 120326 16:19:06 [Note] Event Scheduler: Loaded 0 events 120326 16:19:06 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.2.10-MariaDB-mariadb107' socket: '/var/lib/mysql/mysql.sock' port: 3306 (MariaDB - http://mariadb.com/) 120326 16:20:36 mysqld_safe Number of processes running now: 0 120326 16:20:36 mysqld_safe mysqld restarted 120326 16:20:39 [Note] Plugin 'ARCHIVE' is disabled. 120326 16:20:39 [Note] Plugin 'FEDERATED' is disabled. 120326 16:20:40 mysqld_safe mysqld from pid file /var/lib/mysql/rylai.pid ended I only access mysql on CLI,didnt install any panel yet

  Read the article

• How to get rid of NAT in a LAN?

  - by Alberto

  Currently the LAN I manage is organized as follows: internal network (192.168.1.0) which uses a Linux server as a gateway (internal address on interface br0 192.168.1.1, external address on interface br1 10.0.0.2) through NAT; then the 10.0.0.0 network has another gateway (10.0.0.1) which through another NAT connects the whole thing to the internet. What I would like to achieve is to configure the Linux server so that the first layer of NAT is no more necessary, so that for example a computer in the 10.0.0.0 network can ping every computer in the 192.168.1.0 network. I deleted this iptables rule: iptables -t nat -A POSTROUTING -o br1 -j SNAT --to-source 10.0.0.2, but of course now computers on 192.168.1.0 cannot reach the internet; ip forwarding is of course enabled. What's missing here? Thanks

  Read the article

• Routing from the DMZ to the interior network only

  - by Allan

  I have a home network connected to Verizon's FIOS service. Verizon's ActionTec router is connected to the ONT via coax to establish the MOCA network. My DD-WRT router's WAN port is connected to one of the ActionTec's LAN ports. The DD-WRT router is configured with a static IP address and assigned to the DMZ (this is done so I only have to configure port forwarding once). My issue is that this does not allow computers connected to the DD-WRT to serve streaming audio/video to the MOCA network using Verizon's Media Manager. I know that Media Manager uses ports 18001, 5050, and 5060, but I don't know how to forward those ports so that they are only available to the ActionTec's network and not the rest of the internet.

  Read the article

• Computer never connects to the internet automatically on startup?

  - by RawR Crew

  I have my Windows Vista laptop connected directly to the router via an ethernet cable, and every time I switch the computer on, the computer cannot connect to the internet. It comes up as limited or no connectivity, I am assuming because it has not been assigned an IP address by the router - not too sure if this is right. The problem is usually fixed either by performing a repair through the networking control panel or removing and re-inserting the ethernet cable. It will also connect without doing any of these if the computer is left idle for about 20 minutes. It will connect fine wirelessly without the need for any of this, however I would prefer to connect via the cable. Any ideas how I can fix this? I have replaced the ethernet cable and router already (identical model) but these haven't helped. Thanks for any help on this.

  Read the article

• How to efficiently dump a huge MySQL innodb database?

  - by Jagbir

  I got an Ubuntu 10.04 production MySQL database server where total size of database is 260 GB while size of root partition is itself 300 GB where DB is stored, essentially means around 96% of / is full and there's no space left for storing dump/backup etc. No other disk is attached to server as of now. My task is to migrate this database to other server sitting in different datacenter. Question is how to do that efficiently with minimum downtime? I'm thinking in line of: Request to attach an extra drive to server and take a dump in that drive. Transfer dump to new server, restore it and make new server slave of existing one to keep data in sync When migration is needed, break replication, update slave config to accept read/write requests and make old server read-only so it won't entertain any write requests and tell app developers to update there config with new IP address for db. What's your suggestions to improve this or any alternate better approach for this task?

  Read the article

• No DNS resolving with VPN (RRAS)

  - by Sven

  I have a RRAS server setup on a Windows 2003 machine with two NIC's. The VPN works like a charm, I can ping all the other computers on the network. But it fails when I try to access resources with hostnames. I searches for a solution but the ones I found are about RRAS setup with a remote DHCP server. But in my case it's the RRAS server that hands out the ip addresses (option for redirection for WINS, DNS is ON and set to the LAN NIC). I also heard something about FQDN.. but I don't really understand what that is.

  Read the article

• Access Denied on LAN IIS Access via Integrated Authentication

  - by Pharao2k

  I have an IIS 7.5 (Win2k8R2) Webserver, which publishes an UNC Share (on a Fileserver) with restricted access. The AppPool Identity is a Domain User-Account with read access to mentioned UNC path. Authentication modes are set to Anonymous and Integration Authentication. When I access the path via localhost from the Webserver itself, it works, but if I try the Hostname or IP from either the Webserver or a Client, I get three authentication prompts (does not accept my credentials) and a 401.3 Unauthorized error message (but it states that I am logged in as my normal credentials which definitely have access rights to the UNC path and its files). Security Zone is set to Local Intranet. Sysiniternals Process Monitor lists CreateFile operations on the UNC path (and other existing files in it) with Access Denied and Impersonating on the correct credentials. I don't understand why it is not working, it seems to use the correct credentials on every step on the way but fails with is operations.

  Read the article

• BGP Router reccomendations for simple redundancy [closed]

  - by Jona

  We have two sites that each have an internet connection and have a dedicated dark fibre between them. Each site has it's own IP space and we have an AS number. We're looking to be resilient to failure of the internet connection to either site and so need to buy a pair of approriate routers. Requirements are: Able to run 2 bgp sessions (one with the ISP, one with the other site router) Option to take a full table from the upstream ISPs would be nice. Able to provide HA gateways on the LAN side (e.g. 192.168.0.254 will automatically migrate if it's host router lost power) A dedicated device rather than a server running Linux / BSD Not crazy expensive. Any help / advice much appreciated.

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - Setup guide recommendations?

  - by Peter Mounce

  I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. My ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• Loading guest OS's (Windows) localhost through my host's (Mountain Lion) browsers

  - by Jonah Goldstein

  For work, I have to develop in Visual Studio, which I run via VMware's fusion 5. I really want to test via my mac's native browsers for a multitude of reasons. that is, view the IIs web stuffs that my windows VM should expose, in my mac's own native Firefox, Chrome... etc. if i could expose a pretty url, that would be even better, but i would certainly settle for an ugly IP :) I got a decent number of views but no response when I asked in VMware's own boards. Everyone seems to want to go the other direction (developing in sublimetext/textmate serving up through MAMP and exposing it to windows browsers to test) and there seems to be tried a true solutions for this. unfortunately (or fortunately depending on your preference) my startup is pretty entrenched in the visual studio development tools. I'm really hoping that someone knows the answer to this. Thanks :)

  Read the article

• a load balancing scenario using HAProxy and keepalived shows no performance advantage

  - by chakoshi

  Hi, I am trying to setup a load balanced web server scenario, using two HAproxy load balancers and two debian web servers following this guide http://www.howtoforge.com/setting-up-a-high-availability-load-balancer-with-haproxy-keepalived-on-debian-lenny. the setup is working but the results of simple performance benchmarking is not what I expected. I tried apache benchmark tool to send lots of requests to servers (one time directly testing one of the web servers and the other time testing through the load balancer) using the command "ab -n 1000000 -c 500 http://IP/index.html", but the test results shows better performance for the single server without load balancer. can any one tell me if I'm going wrong on some thing?

  Read the article

• Nginx server_name is set to mydomain.com, so why is www.mydomain.com getting served too?

  - by Lorenz Forvang

  I have my Nginx conf set up as follows: server { listen 443 ssl; server_name mydomain.com; ... } When I load https://mydomain.com, the site loads fine. But when I load https://www.mydomain.com, the site loads as well. Why is this happening? I set up the DNS records using Amazon Route 53 as: A mydomain.com xxx.xxx.xxx.xxx (IP) CNAME www.mydomain.com mydomain.com So is a request to www.mydomain.com arriving at Nginx as a request to mydomain.com? If so, how do I differentiate requests to www.mydomain.com and mydomain.com at my server?

  Read the article

• IPSec on Domain Controllers and Trusted Domains

  - by OneLogicalMyth

  I am looking at configuring IPSec as follows: Isolation Request authentication for inbound and outbound connections Computer and user (Kerberos V5) I am looking to do a blanket deployment across all servers and domain controllers. Workstations I will leave as not set. What impact in terms of the domain controllers with the 2-way forest trust do think I would see? Should I exclude the IP addresses of the trusted domain controllers? I don't want to stop communication between the current and trusted forest, however I do want IPsec to be used within the current forest on all servers. The trusted forest is running 2008 R2 and the current forest is 2012 R2.

  Read the article

• AXFR problem using gradwell secondary DNS

  - by Roaders

  Hi All I use Gradwell.com to provide secondary DNS but I keep getting e-mails along the lines of the following saying that it's not working: You have asked us to provide a secondary DNS service for the following domain(s) Unfortunately, the primary DNS server(s) you specified are not permitting the necessary zone transfers from our servers, or they are not answering "SOA" queries for your domain correctly. I have gone through the support procedure and they weren't that helpful. They have suggested the following: Our secondline team have suggested setting the AXFR to use anouther machine. This will ensure that the transfer is not locked down to one machine and should allow any machine to make the request I don't really know what AFXR is and I only have 1 production machine so I can't set the AFXR to use another one! In previous support correspondence we confirmed that I am allowing transfers to the correct IP and that I have the correct ports open on the firewall. I am running Windows Server 2003. What can I do to try and get these zone transfers working? Thanks

  Read the article

• AWStats log format for tomcat access logs which has X-Forwarded-For

  - by Nix

  What should be the AWStats log format for below tomcat access logs ? I tried these formats but the external IP addresses are not coming into AWStats reports. LogFormat="%host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot %referer %other %other" LogFormat="%other %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot %host_proxy" tomcat valve settings: pattern="%h %l %{USER_ID}s %t &quot;%r&quot; %s %b &quot;%{Referer}i&quot; &quot;%{User-Agent}i&quot; &quot;X-Forwarded-For=%{X-Forwarded-For}i&quot; &quot;JSESSIONID=%{JSESSIONID}c&quot; %D" Log entry: 127.0.0.1 - - [04/Nov/2013:13:39:55 +0000] "GET / HTTP/1.1" 200 12345 "https://www.google.com/url?some_url" "Mozilla/5.0 (Windows NT 6.3; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/30.0.1599.101 Safari/537.36" "X-Forwarded-For=real_ip, proxy_server_internal_ip" "JSESSIONID=-" 12345

  Read the article

< Previous Page | 311 312 313 314 315 316 317 318 319 320 321 322  | Next Page >