Search Results

Search found 18341 results on 734 pages for 'neural network'.

Page 320/734 | < Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327  | Next Page >

• Basic networking: Centos Server Router + Ubuntu Client setup.. unable to access outside world from client

  - by ale

  I am trying to set up my Centos Server with two NICs as a router. eth0 is connected to the outside world and eth1 is connected to an Ubuntu client. Here's eth0 on the server: DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes TYPE=Ethernet eth1 on the server: DEVICE=eth1 BOOTPROTO=static IPADDR=192.168.0.10 # a free address on my network ONBOOT=yes TYPE=Ethernet My server has IPv4 packet forwarding turned on and my iptables only contains: # iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE # iptables --append FORWARD --in-interface eth1 -j ACCEPT My Ubuntu client has this in its /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp gateway 192.168.0.10 but I can't get an Internet connection from the server for my client. I can't even ping my server from the client: $ ping 192.168.0.10 Destination Host Unreachable

  Read the article

• Can't login to SQL Server after moving machine to different office/domain

  - by Dan

  Our company has just been bought and the over the weekend I have brought up the last few machines to plug into their network (they are under a different Windows Domain). The last machine is our Vault system and the SQL Server was using Windows Authentication. I have plugged it into their network and its working fine, but i cannot connect to SQL Server with Management Studio and, I fear, no backup jobs will also be working. When I try to login under Windows Auth, it has the user name of "NEWDOMAIN\Administrator" (greyed out) and then presents a "login failed" message with error code "18456". Can anyone help me with this, or will I just have to reinstall SQL Server, Vault and restore the backup I took before the move?

  Read the article

• Missing management console for Symantec Antivirus, Corporate Edition

  - by Alex C.

  I work for a small (80 employees) non-profit organization. We have a Windows network with a domain. The file server is running Server 2003. A vendor recently installed Symantec Antivirus, Corporate Edition, ver. 10.1.8.8000. It used to be the case that when I logged in to the file server as administrator, I would see an icon on the desktop that took me to the management console for the antivirus software. I could check logs, statuses of client machines, set policies, etc. That icon is now missing, and I can't find anything relevant under the "Start" menu. There is an entry for Symantec Antivirus, but that only gives me the panel for the client process, not the overall management console for the whole network. I don't want to call the vendor back to fix this (I'm baffled how we lost the icon in the first place). Can someone offer some guidance?

  Read the article

• Sudden loss of Wi-Fi connectivity on OS X

  - by GJ.

  Occasionally while I work, without any special provocation, I lose connectivity via Wi-Fi. Other devices connected to the same wifi network have no interruption, and the problem gets resolved once I reboot my MacBook Air, so it's definitely a local problem. Observations: The Wi-Fi symbol in the menu indicates that I'm still connected, but apps can't actually connect neither to the Internet nor to other devices in the LAN. I can't connect to an alternate Wi-Fi network (e.g. Wi-Fi tethering via iPhone). I can connect to the Internet via iPhone USB tethering but this seems to only work some of the time. Only a reboot solves the problem but a regular restart gets stuck on a grey screen with rotating wheel (after all applications have closed) and I have to do a hard reset. How should I go about troubleshooting this? It used to happen very rarely but now is becoming more frequent (approaching once every 2-3 days on average).

  Read the article

• Windows 2003 - logging off the Administrator account makes web applications inaccessible

  - by Saravana

  Consider a web application installed on a Windows Server 2003 SP2 machine with the admin account. The application is accessible in the server as well as in the network when at least one session of the admin account is logged in. If there are no active sessions of the admin account, the web application is not accessible via the network, nor accessible locally when logged in with another user account. What would cause the web application to be inaccessible there's no Administrator session? Please suggest anything that might help find the solution.

  Read the article

• IPv6 6to4 on Windows Server

  - by Graham Wager

  I'm looking for a relatively simple guide to setting up an IPv6 tunnel properly. This network currently has a server (Windows Server 2008R2) running RRAS that establishes connectivity to the internet using a demand-dial PPPoE connection and handles the NAT. It also hosts a DNS server and DHCP. My ISP does not support IPv6, but I have a static IPv4 address. I've read about 6to4 and signed up at tunnelbroker.net, but quickly felt out of my depth. How do I configure my network to use it, and how I should configure my DHCP server with regards to IPv6 addresses?

  Read the article

• nsclient++ map file entries for windows servers

  - by Stewart Robinson

  We use nagios to monitor our network. Has anyone found a sample map file containing entries that correspond to the services in nsclient++

  Read the article

• 12.04 WiFi issue on a particular access point

  - by user71706

  I have a WiFi access point that I connect to a PC to share its Internet connection with multiple machines, in a training environment. All the machines with 11.04 connect to this access point with no problem, and can access any server on the Internet. These machines have an Intel Wireless -N 1030 BGN chipset (as reported by lspci). Now, my problem is that I don't manage to connect 12.04 machines to this wireless network. The systems I tried do manage to connect (confirmed by Network Manager), but when I try to access a website like http://kernel.org, the browser shows "Connecting to kernel.org...", but displays a "The connection has timed out" error page. Other symptoms: Name resolution works (for example 'nslookup kernel.org') finds kernel.org's IP address 'ping kernel.org' doesn't work The same 12.04 machines have no problem at all with other wireless networks. So there is probably something weird in my access point (though the 11.04 machines are not impacted). Would you have any suggestions for investigating this issue? Thanks, Michael.

  Read the article

• Slow LAN transfer from 3rd party computer

  - by Chris

  Hi Everyone, I've got an odd problem that I'm not really sure where to start the troubleshooting process. I have a 'server' with Windows Server 2008R2 (64-bit) installed and it has a couple of hard drives. If I Remote Desktop into the server and transfer files from one HD to the other, all it fine. If however, I use my workstation (Windows 7 64bit) and open up a shared resource on the server and transfer a file from one hard drive on the server to another HD on the server (not using Remote Desktop, just Windows explorer/Network places), the transfer crawls... It takes about 5mins to discover files/calculate the transfer and then starts transferring at speeds like 56KB/s - 200KB/s. Both machines have Marvel GigE network ports with a TrendNet 8-port green GigE switch. I've set Jumbo packets to 9K on both machines...

  Read the article

• FTP Access Denied when uploading to server

  - by Albert

  Ok, here's the story. I have a server running FTP 'out there' I can connect to it using the admin account, browse files, download files. When I try to upload files, I get 550 Access Denied. I have tried through FileZilla and command line. I have windows firewall turned off (on my machine) I can UPLOAD files from another machine (using the same admin account) on our local network (that means, same public IP) what is the problem? I am running Windows 7, Build 7100 and the other machine on the network is running XP SP3 The thing that gets me though, is that this worked for the last probably 4 months, without a problem, I get back in the office after a weekend today and it won't work...

  Read the article

• Coldfusion server VERY slow page loads

  - by Kevin

  I inherited a windows server 2003 coldfusion 7 server a few weeks ago. Today a network cable was unplugged by accident from the server. On plugging it back in, pages were NOT loading at all. Rather, we were receiving a generic coldfusion error page. After restarting IIS several times and coldfusion even more than that, we finally got pages to start loading. However, the loading is extremely slow (30+ seconds) on pages that used to load instantly. Loading through the local network (IE localhost/cfide/administrator) does nothing to help the load speed. I am not familiar with IIS or Coldfusion (We're in the process of migrating this to Linux/PHP), so this is all new territory to me. I'm hoping someone may have experienced this issue in the past and can help me solve it. I'm happy to provide any additional information that might be necessary....I'm just not sure what information you might need in order to help. Thanks for your time.

  Read the article

• Is SCCM overkill for medium-sized organizations?

  - by Le_Quack

  I am an IT technician in a high school with around 1600 students 250 staff and 800+ client computers mostly running Windows 7. Our team is composed of three members. My boss seems content with a network that works (just about) not necessarily a productive well maintained network that is easy to run and maintain. I'm still fairly early on in my I.T. career so I'm not up to speed on all the different endpoint management solutions that are available. I'm looking for a better way to manage clients (deploy software, track changes, inventory etc) I like the look of SCCM 2012's features but the case studies seem to be aimed at large multi-site infrastructural rather than a single mid sized site. Is SCCM suitable for a mid sized single site or is it aimed at much larger corporations? How can I determine whether or not an endpoint management solution like SCCM is a good fit for our organization? EDIT: Thanks for all the help I'll take a look at SCE and SCCM and get some proposals drawn up to take to my boss/deputy head

  Read the article

• mac + parallels and https site test = router restarts

  - by Erik

  Ok I have an interesting & very frustrating problem happening. I'm going to explain it the best I can. I work as a graphic designer & web designer on a mac and have a Comcast internet connection that comes through a Comcast branded router (SMC8014) which then ties into an Airport Extreme Base Station which runs my office network. I run OS 10.5.7 and also run Parallels 4.0.3 (running Windows XP) for testing websites in Internet Explorer and so on. Ok, so that the basic background. Here's my issue. I've been collaborating an ecommerce website with another designer/developer and when testing the site on the PC side we have started to run into some sort of network problem. The site is https if that matters at all I suspect it may. Basically when I run parallels for testing I am constantly having to restart the router in order to connect to the test site (it's hosted). Funny thing is I can access the rest of the internet fine, just not this site I'm working on until I restart the router (It's sorta like the site is timing out). This never happens when just running the Mac side of things. It only becomes an issue when Parallels is open and I am doing page refreshes while making css or HTML edits via something like Coda or CSS edit (connected to the hosting server via ftp). The real problem is that once the problem starts I only get about 2 or 3 page loads before I have to restart the router again. It's absolutely crippling. I cannot get any work done when I have to restart the router every couple of minutes. So, if you think this problem is isolated to me, the answer is no. The designer/developer I'm collaborating with has an office a couple miles away and experiences very similar problems under slightly different setup. He also has Comcast as his internet provider and connects his router to an Airport and primarily works on a mac. The main difference is that rather than using a visualizer like parallels to test the website on the PC he uses a real live PC that is on his network. Once he fire up the PC to do testing he runs into the same issue described above. After a couple of page refreshes in Internet Explorer or other browser on the PC the site becomes unresponsive and the router has to get restarted. Any thoughts on what is going on here would be greatly appreciated. Thanks in advance.

  Read the article

• Mac OS X: pushing all traffic through a VMWare VM

  - by bj99

  I want to set up an Astaro (Sophos) UTM in a Virtual Machine. The Setup should be at the end the following: Cable Modem (one IP adress) | [Ethernet] Sophos UTM (running as VM [VMWare Fusion 5] on the MacMini) | [WIFI] Airport Express v2 (for sharing Local Network to wireless and wired clients) 1)| [WIFI] 2)| [Ethernet over Thunderbolt Ethernet Adapter]* Clients MacMini (Local File Server) *To have the Mini also protected behind the UTM So the setup process for the UTM works fine, but then the problems start: I just have one external IP (from my cable modem provider)== So if I put the VM in briged mode my Internet connection drops, because the MacMini also has its IP adress. If I put the VM to NAT mode the Mini itself is not protected by the UTM So: is there a way to hide the en0 interface(Ethernet) and the en1 interface (Wifi) from the MacMini, so that they not even appear in System Preferences Network section but are available to the VM? That way the Mini must connect to the en2 interface (Thunderbolt adapter) to make any Internet/LAN connection and I just use the given single IP from the Cable Modem. Thaks for any suggestions... Sebastian

  Read the article

• Samba as a PDC and offline authentication

  - by Aimé Barteaux

  Say I have a Windows laptop which has been connected to a domain. The domain has a Samba server as a PDC. Now say that I move the laptop outside of the network (the network is completely inaccessible). Will I be able to logon into accounts I have accessed before on the laptop (through GINA)? Update: Looking at the smb.comf documentation I noticed the setting winbind offline logon: This parameter is designed to control whether Winbind should allow to login with the pam_winbind module using Cached Credentials. If enabled, winbindd will store user credentials from successful logins encrypted in a local cache.. To me it looks like this solves the issue but can anyone else confirm it and/or point out if any additional values need to be set?

  Read the article

• postfix, webmin installed. whats next?

  - by Johnny Craig

  Im trying to get imap running and dont know the problem. i a developer, not a network guy.( our network guy left) we had postfix installed already for outgoing mail on 8 domains. we only had incoming on 1 domain. but that mail server is located on a different ip. now we want incoming on another domain, but we dont want it on another ip, we want it on the same ip as the website itself. I installed dovecot today because my hosting company said i needed it. it seems to run fine. do i need dovecot AND postfix? or are they the same thing? dovecot does not show up anywhere in webmin what i cant seem to figure out how to do is add a user email so i can try to telnet in on port 143. i think i have evrything installed, just need the next step.... sorry for the newb question

  Read the article

• dns hierarchy not working !! Please help

  - by nikhilelite

  (DNS1 ,WWW1, Gateway1) (sub-internal network) (DNS0,WWW0,Gateway0) (internal network) DNS1: 192.168.250.3/24 WWW1: 192.168.250.4/24 Gateway1: 192.168.250.1 /24 (internal) :: 192.168.0.150 to 192.168.0.175 (external) DNS0:192.168.0.197/24 WWW0:192.168.0.197/24 Gateway0: 192.168.0.1 (internal) :: 69.94.x.x (external, dynamic ,isp control) Expected behavior: When using dig from internal (192.168.250.0/24) hosts, and query about domain from 192.168.0.197/16 nameserver's hosts (for which its authoritative) , it should return the ip address. Whats happening: After dig, answer section empty, the query is trying to access a.root server instead of 192.168.0.197 ,even though i have defined 192.168.0.197 as dns in gateway1's resolv.conf Why? I need this working asap, can anyone here help ?

  Read the article

• What is bondib1 used for on SPARC SuperCluster with InfiniBand, Solaris 11 networking & Oracle RAC?

  - by user12620111

  A co-worker asked the following question about a SPARC SuperCluster InfiniBand network: > on the database nodes the RAC nodes communicate over the cluster_interconnect. This is the > 192.168.10.0 network on bondib0. (according to ./crs/install/crsconfig_params NETWORKS> setting) > What is bondib1 used for? Is it a HA counterpart in case bondib0 dies? This is my response: Summary: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic. Details: bondib0 is the cluster_interconnect $ oifcfg getif            bondeth0  10.129.184.0  global  public bondib0  192.168.10.0  global  cluster_interconnect ipmpapp0  192.168.30.0  global  public bondib0 and bondib1 are on 192.168.10.1 and 192.168.10.2 respectively. # ipadm show-addr | grep bondi bondib0/v4static  static   ok           192.168.10.1/24 bondib1/v4static  static   ok           192.168.10.2/24 Hostnames tied to the IPs are node1-priv1 and node1-priv2  # grep 192.168.10 /etc/hosts 192.168.10.1    node1-priv1.us.oracle.com   node1-priv1 192.168.10.2    node1-priv2.us.oracle.com   node1-priv2 For the 4 node RAC interconnect: Each node has 2 private IP address on the 192.168.10.0 network. Each IP address has an active InfiniBand link and a failover InfiniBand link. Thus, the 4 node RAC interconnect is using a total of 8 IP addresses and 16 InfiniBand links. bondib1 isn't being used for the Virtual IP (VIP): $ srvctl config vip -n node1 VIP exists: /node1-ib-vip/192.168.30.25/192.168.30.0/255.255.255.0/ipmpapp0, hosting node node1 VIP exists: /node1-vip/10.55.184.15/10.55.184.0/255.255.255.0/bondeth0, hosting node node1 bondib1 is on bondib1_0 and fails over to bondib1_1: # ipmpstat -g GROUP       GROUPNAME   STATE     FDT       INTERFACES ipmpapp0    ipmpapp0    ok        --        ipmpapp_0 (ipmpapp_1) bondeth0    bondeth0    degraded  --        net2 [net5] bondib1     bondib1     ok        --        bondib1_0 (bondib1_1) bondib0     bondib0     ok        --        bondib0_0 (bondib0_1) bondib1_0 goes over net24 # dladm show-link | grep bond LINK                CLASS     MTU    STATE    OVER bondib0_0           part      65520  up       net21 bondib0_1           part      65520  up       net22 bondib1_0           part      65520  up       net24 bondib1_1           part      65520  up       net23 net24 is IB Partition FFFF # dladm show-ib LINK         HCAGUID         PORTGUID        PORT STATE  PKEYS net24        21280001A1868A  21280001A1868C  2    up     FFFF net22        21280001CEBBDE  21280001CEBBE0  2    up     FFFF,8503 net23        21280001A1868A  21280001A1868B  1    up     FFFF,8503 net21        21280001CEBBDE  21280001CEBBDF  1    up     FFFF On Express Module 9 port 2: # dladm show-phys -L LINK              DEVICE       LOC net21             ibp4         PCI-EM1/PORT1 net22             ibp5         PCI-EM1/PORT2 net23             ibp6         PCI-EM9/PORT1 net24             ibp7         PCI-EM9/PORT2 Outbound traffic on the 192.168.10.0 network will be multiplexed between bondib0 & bondib1 # netstat -rn Routing Table: IPv4   Destination           Gateway           Flags  Ref     Use     Interface -------------------- -------------------- ----- ----- ---------- --------- 192.168.10.0         192.168.10.2         U        16    6551834 bondib1   192.168.10.0         192.168.10.1         U         9    5708924 bondib0   There is a lot more traffic on bondib0 than bondib1 # /bin/time snoop -I bondib0 -c 100 > /dev/null Using device ipnet/bondib0 (promiscuous mode) 100 packets captured real        4.3 user        0.0 sys         0.0 (100 packets in 4.3 seconds = 23.3 pkts/sec) # /bin/time snoop -I bondib1 -c 100 > /dev/null Using device ipnet/bondib1 (promiscuous mode) 100 packets captured real       13.3 user        0.0 sys         0.0 (100 packets in 13.3 seconds = 7.5 pkts/sec) Half of the packets on bondib0 are outbound (from self). The remaining packet are split evenly, from the other nodes in the cluster. # snoop -I bondib0 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib0 (promiscuous mode) 100 packets captured   49 node1-priv1.us.oracle.com   24 node2-priv1.us.oracle.com   14 node3-priv1.us.oracle.com   13 node4-priv1.us.oracle.com 100% of the packets on bondib1 are outbound (from self), but the headers in the packets indicate that they are from the IP address associated with bondib0: # snoop -I bondib1 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured  100 node1-priv1.us.oracle.com The destination of the bondib1 outbound packets are split evenly, to node3 and node 4. # snoop -I bondib1 -c 100 | awk '{print $3}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured   51 node3-priv1.us.oracle.com   49 node4-priv1.us.oracle.com Conclusion: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic.

  Read the article

• Computers "applying computer settings" for a long time on start-up...why?

  - by tombull89

  Hello. Might be a bit of a slong shot but I'm stumped, along with the ICT Manager for the school I'm working it. In one of the IT rooms when you switch a computer on it will boot through BIOS fine, but when it gets to "applying computer settings" it can hang for a long time (~15 minutes). If you unplug the computer from the network it starts up fine, gets to the login screen, then you can plug the network cable in and it will work fine. I don't think it's anything to do with the fact we've been coming close to running out of IP addresses or a problem with our DHCP. Microsoft KB says apply the latest service pack, which we've done, and check a service. Servers and domian controllers are S2003, Computers and Desktops are XP. Does anybody have any thoughts on what to try?

  Read the article

• IPv6 connections routed to IPv4 device

  - by Yvan JANSSENS

  I have an IBM 9406-250 with V5R1 and IPv4 only connectivity, and want it to be reachable over IPv6. I cannnot install an IPv6 stack on it, but I want it to be accessible by IPv6 so I can drop the requirement to VPN to my home network. I have an OpenWRT device running, which takes care of the IPv6 routing on my network and the tunnel to SIXXS, and I was wondering if it is possible to assign another IPv6 address to that device, and route it to the IPv4 IBM computer. Which software do I need for this, and how is this technique called?

  Read the article

• Routing Essentials

  - by zharvey

  I'm a programmer trying to fill a big hole in my understanding of networking basics. I've been reading a good book (Networking Bible by Sosinki) but I have been finding that there is a lot of "assumed" information contained, where terms/concepts are thrown at the reader without a proper introduction to them. I understand that a "route" is a path through a network. But I am struggling with visualizing some routing-based concepts. Namely: How do routes actually manifest themselves in the hardware? Are they just a list of IP addresses that get computed at the network layer, and then executed by the transport? What kind of data exists in a so-caleld routing table? Is a routing-table just the mechanism for holding these lists of IP address (read above)? What are the performance pros/cons for having a static route, as opposed to a dynamic route?

  Read the article

• Cable installed - now my hub has no connection the router/modem - what do I need to buy?

  - by bcmcfc

  My previous setup was as follows: [modem/router]------[switch]+------ [pc1] +------ [pc2] I've just moved and had cable installed and I no longer have the option of running a lengthy LAN cable from the router to the switch to provide network and internet access to the two PCs. The cable company provided 2 wireless N USB adapters. What do I need to buy to plug into where in order to restore the network to its previous state? PC1 dual boots Windows 7 and Ubuntu 12. PC2 runs Debian 6. Edit: USB adapters - Netgear WNDA3200 Switch - TP-Link TL-SF1008D 8 port Ethernet switch Cabling - various patch cables cat5e rj45 Modem/Router - pretty standard cable company job - wireless Intention is something like- [modem/router] --wifi-- [some-new-hardware or perhaps to pc1] ----[switch]---[pc1/2]

  Read the article

• How to connect MTS MBlaze on ubuntu 11.04

  - by murali_ma

  i have installed ubuntu 11.04 inside the windows xp. i have MTS Mblaze USB Modem. (my service provider is MTS MBlaze,india) i want to use Mblaze into ubuntu so that i did the following steps for make connecting the device. from the task bar->edit connections->mobile broadband->choose country->mts mblaze and ok i give username and password ([email protected] and password MTS. ok now i enable mobile broadband , MTS MBlaze connection1(connection name) from task bar. steps followed from "http://randomshandom.wordpress.com/2010/12/20/how-to-connect-mts-mblaze-device-in-ubuntu-10-10-11-04/#more-3" for the first time it successfully connected and browse the internet. after i restart the system i connect it. it does not connected. it shows Modem network disconnected. i accessed many times and delete the connection and recreated but i does not help me. if i try to connect device i think it the search the network, i saw the wave signal. img Image for showing problem:

  Read the article

• ipconfig /release not working, why?

  - by barlop

  ipconfig /release is not working, why is that? here is a sequence where I put my cable in get an IP, try ipconfig /release and it tells me it can't release wireless, but there is no wireless connection. i'm just trying to release the wired one. C:\>ipconfig Windows IP Configuration Ethernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Fine so I plug my cable in C:\>ipconfig Windows IP Configuration Ethernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 0.0.0.0 Subnet Mask . . . . . . . . . . . : 0.0.0.0 Default Gateway . . . . . . . . . : C:\>ipconfig Windows IP Configuration Ethernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.1.8 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.254 Fine so from above, it clearly has an iP C:\>ipconfig /release Windows IP Configuration No operation can be performed on Wireless Network Connection while it has its me dia disconnected. C:\>

  Read the article

• How to synchronize users, passwords, hosts, etc without NIS

  - by joshxdr

  I am administering a very small solaris 2.6 network with 4 boxes total. Is it possible to use scp or similar to replace NIS for synchronizing users, groups, hosts, etc? This network is only a small part of my job and I don't want to spend too much time on it, and I am worried the setup and maintenence of NIS will not pay off. I need it to behave like a proper multi-user system, when a user logs into any machine, the users, passwords, hosts, etc. are always the same. Is there an easy way to do this with scp? Right now I copy /etc/passwd from one box to another with scp, but sometimes I make mistakes or forget a step, and scp inside of shell scripts don't seem to works so well since they require password authentication. Any recommendations would be welcome.

  Read the article

< Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327  | Next Page >