Search Results

Search found 8850 results on 354 pages for 'xp'.

Page 322/354 | < Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >

• Installed Memory (RAM): 8GB (4GB Useable)

  - by Mike Bannister

  I have 4X 2GB RAM sticks installed, Windows 7 Ultimate x64 shows "Installed Memory (RAM): 8GB (4GB Useable)" in the system information. The motherboard says it supports up to 16GB of memory. I had Windows XP x64 and I'm pretty sure it was able to use all 8Gigs of memory. I've just formatted and am not burning through 4GB for sure. *The BIOS only show 4096MB while booting. I was only able to find one option relating to memory mapping and it took it from 4Gigs to 3 and change. CPU-Z shows all 4 sticks as 2048MB I went in to msconfig and checked the limits, they are not set. I tried resetting the CPU and RAM sticks 3 times, the CPU has no pins to be bent (flat contacts, I5) I rearranged all the RAM. I have separate video memory from the system memory. I have a 64 bit OS (I am 100% certain) Hardware: Memory: Four Corsair XMS3 TW3X4G1333C9AG Motherboard: Asus P7P55D Pro CPU: Intel Core i5-760 BX80605I5760 Graphics: Two ZOTAC ZT-50401-10L GeForce GTX 550 Ti If anyone has new ideas or knows the exact setting in the bios, it would be greatly appreciated.

  Read the article

• Windows 7 host with Ubuntu Guest and a performance hit, memory locks?

  - by Cyrylski

  I have a brand new Lenovo T510 with Core i5 and 4GB of RAM with Windows 7 on it. I Installed Ubuntu 10.10 in a Virtualbox. For some reason system gets really slow on this setup which makes me really angry. There's a video card shared with full 3D support enabled and 1GB of RAM allocated for the Ubuntu machine. It may sound stupid, but WHY is the whole memory consumed in an instant when I run Virtualbox? I struggled for like 10 minutes restraining myself from a brutal reset, and now everything runs smooth but memory "in use" in Resource Monitor is 3GB flat with only Chrome running. I'm new to Windows 7, but I'm really disappointed with performance at this point... I used to work in a different environment with much slower hardware and there was no such problem (WinXP over Ubuntu, 1GB out of 2GB allocated for WinXP guest on intel GMA). This is, until I clogged RAM totally there. But I was capable of running Chrome, Firefox and Apache server on a 1GB RAM in Ubuntu there and Photoshop CS4 on Windows XP and it worked. In this case I can't go beyond setting up Ubuntu properly. I bet I'm doing something wrong.

  Read the article

• Paranormal activity in My Pictures folder: Thumbnail doesn't match actual picture.

  - by Sam152

  After finding an amusing picture on a popular imageboard, I decided to save it. A few days past and I was browsing my images folder when I realised that the thumbnail generated by Windows XP in the thumbnails view did not match the actual image. Here is a comparison image: What's even stranger in this situation is that the parts of the photograph that are different have actually been replaced with what might be the correct background. Furthermore, it is a jpeg (no PNG transparency tricks) that is 343 kilobytes but only 847x847 pixels wide. What could be going on here? Could there be anything malicious in the works, or hidden data? Before anyone asks, I have checked and preformed the following: Deleted Thumbs.db to reload thumbnails. Opened image in different editors. (they appear with the text) Moved image to a different directory. Changed the extension to .rar. All these steps produce the same results. Pre actual posting update: It seems that opening the image in paint, changing the image entirely (deleting entire contents and making a red fill) will still generate the original thumbnail, even after deleting Thumbs.db etc. I'm also hesitant to post the original data, in case there is something malicious or hidden that could be potentially illegal. (Although it would be very beneficial to see if it works on other computers and not just my own).

  Read the article

• How many connections are allowed to a Windows 7 Home Premium shared folder or printer?

  - by lcbrevard

  I have a client who runs a small business with 4 desktop systems, two of which are inexpensive [ The XP Pro system is currently being used as a file "server" for time sheets and QuickBooks data. It also shares an HP ink jet printer. The client wishes to decommission this system because (1) it's ugly [it is] and (2) it uses too much power [it does]. If we share a folder on one of the Windows 7 Home Premium systems will there be a problem connecting to it with up to 3 other computers? What about the printer sharing? I vaguely remember seeing that Windows 7 is less usable for "server" purposes and has severe restrictions on the number of clients. But I cannot seem to find those numbers. In my own network (over 12 systems) we have no problem sharing from Windows 7 Ultimate to a few other systems where needed. I am embarrassed that I cannot seem to find the answer to this in a couple of days of searching. I can do an anytime upgrade of one of these systems to Pro if that would improve the ability to share from it. I am not able to convince the client to put a "real server" into their network.

  Read the article

• How many connections are allowed to a Windows 7 Home Premium shared folder or printer?

  - by lcbrevard

  I have a client who runs a small business with 4 desktop systems, two of which are inexpensive [ The XP Pro system is currently being used as a file "server" for time sheets and QuickBooks data. It also shares an HP ink jet printer. The client wishes to decommission this system because (1) it's ugly [it is] and (2) it uses too much power [it does]. If we share a folder on one of the Windows 7 Home Premium systems will there be a problem connecting to it with up to 3 other computers? What about the printer sharing? I vaguely remember seeing that Windows 7 is less usable for "server" purposes and has severe restrictions on the number of clients. But I cannot seem to find those numbers. In my own network (over 12 systems) we have no problem sharing from Windows 7 Ultimate to a few other systems where needed. I am embarrassed that I cannot seem to find the answer to this in a couple of days of searching. I can do an anytime upgrade of one of these systems to Pro if that would improve the ability to share from it. I am not able to convince the client to put a "real server" into their network.

  Read the article

• Outlook 2007 - Mailbox doesn't show my Items (like Calendar)

  - by cyntaxx

  Hi All, I have running an Exchange Server 2003 and 2 IBM Laptops (A&B)with XP SP3. On both Laptops Office 2007 is installed. Laptop "A" Outlook doesn't show me my Calendar and Notes entries in my mailbox tree on Laptop "A". I can click on the calenendar tab and the entries are there. On Laptop "B" it is working fine. I know that I can make a "rigth click" on "mailbox" and choose "create new folder". Than I select i.g. my calendar. It creates it, but I can't access it through my mailbox tree. Clicking on the Calendar tab works fine again. So, the mailbox is fine (I think). There must be failure with Outlook. I tried these commands here with no positive result. Outlook /cleanviews Outlook /resetfolders I want to avoid a repair installation of Outlook, because the whole office needs to be repaired. (And both laptops belong to my boss) :) Thanks, Toby

  Read the article

• How to decouple development server from Internet?

  - by intoxicated.roamer

  I am working in a small set-up where there are 4 developers (might grow to 6 or 8 in cuople of years). I want to set-up an environment in which developers get an internet access but can not share any data from the company on internet. I have thought of the following plan: Set-up a centralized git server (Debian). The server will have an internet access. A developer will only have git account on that server, and won't have any other account on it. Do not give internet access to developer's individual machine (Windows XP/Windows 7). Run a virtual machine (any multi-user OS) on the centralized server (the same one on which git is hosted). Developer will have an account on this virtual machine. He/she can access internet via this virtual machine. Any data-movement between this virtual machine and underlying server, as well as any of the developer's machine, is prohibited. All developers require USB port on their local machine, so that they can burn their code into a microcontroller. This port will be made available only to associated software that dumps the code in a microcontroller (MPLAB in current case). All other softwares will be prohibited from accessing the port. As more developers get added, providing internet support for them will become difficult with this plan as it will slow down the virtual machine running on the server. Can anyone suggest an alternative ? Are there any obvious flaws in the above plan ? Some key details of the server are as below: 1) OS:Debian 2) RAM: 8GB 3) CPU: Intel Xeon E3-1220v2 4C/4T

  Read the article

• Windows 7 permissions and Samba domain

  - by Nimzo

  I'm the main desktop support in an office of mixed MacOS and WinXp machines, about 60. I'm new to Windows 7. Currently our XP users are admins on their own machines, and my boss is wanting us to get away from that now that we're going to Windows 7 (64bit). My boss is largely absent from my day-to-day work, so I'm here looking for help =) I have numerous unattended .cmd scripts that we run from a server share, unattended software installs. Some run at login, some have to be run manually. With the NetworkAdmin account logged on to the computer, I am able to run the .cmd files and install stuff just fine. With my test account logged on (Power User), I cannot run the .cmd file - I get an Access Denied. When I change my test account to an Admin on the machine, I still get access denied. However, the test account can simply double-click the .exe and install the software just fine, as admin. Power User can't install anything. How do I fix it so that any power user or admin on the machine can run anything as long as it's on our shared software drive?

  Read the article

• Ubuntu server 10.04 disconnects after short periods of inactivity on my site

  - by Melot

  Hi! I'm new to Ubuntu (installed it for the first time just a couple of days ago on my server). I've Ubuntu Server 10.04 and am just using the terminal, no GUI like Gnome. So far it's working pretty great except for one big thing. Whenever I go to sleep and there's no activity on my server (it's not a big site so active users drop to 0 during the night), the server kind of disconnects. The only thing that can bring the site back online is to restart the whole server. I've tried disabling powersaving by using setterm but that changes nothing. Even if I wake up the server by pressing any key or so the site wont go back online! I've tried just restarting both Apache and MySQL (I'm using LAMP-server btw) but not even that works. But as soon as I turn the power off and on at the server, everythings work like normal for a couple of minutes of inactivity (~5-15 minutes I'd guess) and then it's down again unless someone logs in to the site and is active. I was previously using XAMPP on my laptop with Windows XP and that worked 24/7 so I don't think it's anything with my router or ISP. This is driving me crazy! My site is down all the time I'm in school as I have no possibility to restart the server if it becomes offline. Does anyone have a clue to what could be wrong?

  Read the article

• Big and reaaaally strange problem with a web server (host InMotion Hosting)

  - by altar

  Hi. I have a terrible problem that I have tried to solve since three days ago: I browse my own web site and after a while I cannot access the web site. AT ALL! I can only see a 501 error message: "Method Not Implemented. GET to / not supported. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request." Once I get that error the site is totally and permanently inaccessible in that browser!! Reboot, browser restarts, clear cache, clear all history and cookies, etc., are not working. I have reproduced it in 4 different computers. Three computers are in one city, the 4th is in another city. Two different ISP's also. One computer is Linux, the others are on Windows (XP and 2000). Browsers are FF 3 to FF3.5 and IE 8. The error is ALMOST reproducible on demand (for me at least). It appears when I browse the forum under certain circumstances. I don't know which are these circumstances, but if I browse it long enough (10 sec to 5 minutes) it eventually appears. Just to make it clear, once the error appears (while browsing the forum) then the whole web site become inaccessible, not only the forum! My host is not willing to help because they say they cannot reproduce the error. I sent screenoshots but they don't care. NEWS Reseting browser's settings from the 'Tools-Clear private data' din't worked. However! When I have cleared the same settings (more exaclty) cookies from the special menu that appears when you right click website's icon, it worked. So it was something related to a cookie BUT it manifests in all browsers (FF, IE, Opera). So it cannot be a browser related problem.

  Read the article

• .bat file - Nagios v3.2 service check and start if stopped

  - by LbakerIT

  I'm just barely getting into programming so I do apologize for my ignorance. I'm trying to create a .bat file that will check if a service is running on XP Pro. If service is running it will exit 0. If the service is stopped start service wait 10 seconds (via ping i'm guessing) check if service is running if service is running exit 0 if service is stopped start service wait 10 seconds Do this check a total of 3 times. if service does not come up within that time: exit 2 Exit 0 = ok exit 1 = warning exit 3 = critical (and this will alert) I need to do this for 3 different services but i'm expecting that it would be better to create one per service. That way you get notified on the specific service that is not coming back up. The goal is that if the service stops it will start it. If after 30 seconds it is unable to start the service then it will send an alert. The reason I'm trying to do it with a .bat is this is consistent with all other scripts and I did not want to complicate it further by adding different kinds of code. Yay for consistency! Again I do apologize for my ignorance I've been thrown into this project last minute. Thank you for the help and reading my question!

  Read the article

• Win 7 64 with 8 gig of ram, getting running low on memory errors.

  - by John

  I have a new Dell laptop running Win7 64 with 8 meg of ram. If I leave the system running overnight I start getting low memory errors the next day. Looking at task manager it shows 6.27 gig used but looking at the processes list the totals don't show nearly that much. I am showing all processes from all users. I have also looked at the processes with PRocess Explorer and see the same results. Using resource monitor I see 4165 MB in Use, 2328 MB Modified and 1352MB Standby with only about 345 MB free. These numbers don't seem to add up to what I have running. I have Visual Studio 2010 running along with a number of IE8 sessions. I have run the same set of apps with XP SP2 32 bit with 4 gig of memory and never had this sort of problem. What is Modified memory? What is Standby memory? Any suggestions on what might be the issue and what might be a fix? TIA J

  Read the article

• Why won't sql server express 2008 service restart after I enable TCP/IP Protocol?

  - by John

  Whenever I enable TCP/IP connections on my SQL Server Express 2008 database server running on Windows XP SP3, I cannot restart the service, it simply states "The request failed or did respond in a timely fashion". Any suggestions of what I may have configured incorrectly? [update] Here is the applicable part of the Error Log: MSSQL$SQLEXPRESS Server failed to list on 'any' 3060. Error: 0x2747. To proceed, notify you system administrator. MSSQL$SQLEXPRESS TDSSNIClient initialization failed with error 0x2747, status code 0xa. Reason: Unable to initialize the TCP/IP listener. An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. MSSQL$SQLEXPRESS TDSSNIClient initialization failed with error 0x2747, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. MSSQL$SQLEXPRESS Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log. MSSQL$SQLEXPRESS SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.

  Read the article

• Notepad and Regedit does not launch from C:\Windows or C:\Windows\System32, but will from C:\Windows\SysWOW64

  - by lordhog

  My work machine was recently updated from Windows XP 64-bit to Windows 7 64-bit. I have found a few odd things that I can not figure out why they are occurring. If I type in Notepad.exe or RegEdit.exe from the Run diaglog the applications will not launch. When executing RegEdit.exe from the Run dialog the UAC does display asking for admin privileges, but the application never launches. Also, if I go to the Start menu and click on Notepad from there, Notepad never launches either. Other programs seem to be okay, like mspaint, wordpad, etc. Now, if I launch Notepad or RegEdit from C:\Windows\SysWOW64 then these applications will run, though I think these are the 32-bit version and not the 64-bit version. I am not sure what is going on. Has anyone seen this behavior before and how to fix it? I have Windows 7 64-bit at home and I don't have this issue. I even copied Notepad.exe from home and place it in the C:\ folder and tried to launch it from there and it still doesn't work. Regards, Mark

  Read the article

• Enterprise level Ticketing and inventory system reccomendations [closed]

  - by TrackingSystem

  My company is sort off at a stand still when it comes to our technician ticketing and inventory system. We currently use Numara TrackIt! - which isn't cutting it to say the least. Dell recommended KACE, but it's web based which is what we would like to avoid. We need a good ticketing and inventory system with the following: Server/Client setup Client supports XP/Windows 7 Ent. Web Based as well as Client is a plus Technician ticketing Active Directory integration Inventory System (Asset tag tracking etc/PO tracking) Exchange integrated - when tickets are made you have an option to send to the requester. Something that will scale well Please, if anyone is a Systems Admin or has knowledge regarding use of a great ticketing system please let me know. We have a large international corporation - price honestly isn't an issue. Keep in mind this will be mainly used for technicians to create tickets, enter inventory(track PCS) and possible even an option to track purchase orders. We want an enterprise level ticketing system with these capabilities please help! Thank you.

  Read the article

• Windows-7 Ultimate 64 bit wont connect to my wired/wireless networks

  - by A302

  Windows 7 Ultimate 64 bit. Everything was working fine & then just stopped working. The nic card Realtek PCIe GBE Family Controller is enabled but does not connect to my router (cables & router ports are good). Wireless Atheros AR5007EG is enabled but the connection is limited (encryption type / key have been verified). A laptop running XP can connect both wired / wireless. SSID is not being broadcast, connect to network if it is not broadcasting is checked. Have checked services.msc for Bonjour & did not see it listed. Network & sharing center does not list any active networks. Device manager lists both devices as functioning properly. Router configuration has not been changed. Virus scan has not found anything. I would like to fix this rather than using Acronis to do a system restore. Thanks in advance for any advice offered in solving this. 26 Jan, the nic card & wireless are working using PCLinux OS Live CD. It appears that the problem is Windows 7 related.

  Read the article

• windows server 2003 speed issues

  - by farzinSH

  I have a HP server with windows server 2003 and 50 windows XP clients. Since a week and a half the networks speed suddenly drop 2-3 times per day. It gets so slow that none of the clients could work with the HIS program installed on them. We tried so many different things such as replacing the hubs,switches and even some wires. Every time one of these changes solves the problem and the network goes back to its normal state. I checked everything. Even when I disconnected all the clients from the server and connected it to just one computer the problem still remained for 2 hours. I just narrowed down the problem to the couple of likely speculations as follows: viruses? (Updated Kaspersky running on the server shows none) server hardware failure? Physical memory usage on the server? (Because the last time the problem occurred none of the changes above solved the issue so I restarted the server an checked the physical memory usage which was 2 GBs. But I noticed it's increasing over time to over 9 GBs...the server has 16 GBs of RAM.) I surfed the internet and got nothing. Any help would do us a lot....thanks in advance

  Read the article

• How to train users converting from PC to Mac/Apple at a small non profit?

  - by Everette Mills

  Background: I am part of a team that provides volunteer tech support to a local non profit. We are in the position to obtain a grant to update almost all of our computers (many of them 5 to 7 year old machines running XP), provide laptops for users that need them, etc. We are considering switching our users from PC (WinXP) to Macs. The technical aspects of switching will not be an issue for the team. We are in the process of planning data conversions, machine setup, server changes, etc regardless of whether we switch to Macs or much newer PCs. About 1/4 of the staff uses or has access to a Mac at home, these users already understand the basics of using the equipment. We have another set of (generally younger) users that are technically savvy and while slightly inconvenienced and slowed for a few days should be able to switch over quickly. Finally, several members of the staff are older and have many issues using there computers today. We think in the long run switching to Macs may provide a better user experience, fewer IT headaches, and more effective use of computers. The questions we have is what resources and training (webpages, Books, online training materials or online courses) do you recommend that we provide to users to enable the switchover to happen smoothly. Especially, with a focus on providing different levels of training and support to users with different skill levels. If you have done this in your own organization, what steps were successful, what areas were less successful?

  Read the article

• SATA disks boot order?

  - by kire

  I have a computer with 4 SATA disks connected, 2 to the motherboard and 2 to a PCI-card. I've moved all the disks from other computers so 2 of them already has windows installed, the other 2 has just had data on them. I know one of the windows installations works and i want to use this install. If i only have this disk connected the computer boots fine. The problem is that when i boot with all 4 disks connected i get an error message about not being able to boot. This message is in swedish(the wrong windows installation is swedish) so it has to come from that installation. Ok, that means it is trying to boot from wrong disk, i try to pull out that disk but then i get the same error in english. I pull out the fourth disk instead I get another error about NTLDR not being able to load. If i disconnect all drives except the one with the correct windows installation, windows boots fine and i can also connect the other drives while windows is running and browse around in them without any problems. I have no clue what to do. In my BIOS setup i can only select SATA as boot-option, not the order of the disks. I also tried to remove what's left of windows on the other disk by simply deleting everything in explorer(got hidden- and sytstem-files visible). Both windows installations are XP btw. Edit: I switched the cables around and now it magically works. :)

  Read the article

• How to diagnose computer freezing problem

  - by reinierpost

  I have a laptop (a Medion from Aldi) that tends to hang quite often - so often, in fact, that several attempts to install Windows XP or Ubuntu on it have all failed. However, I am able to boot and run Ubuntu as found on the standard Ubuntu 10.10 installation image. I have done this two times thus far. The first time everything was running smoothly, until at some point the GUI (i.e. X) became unresponsive. The cursor kept moving with the mouse, but menus would no longer show and clicking things no longer produced any response. So I switched to the consoles (Ctrl-F1, Ctrl-F2, etc., which in this setup automatically run shells. The shells were still responsive, and the cd command would still work, but any command that invoked an executable (e.g. /bin/ls or cd /bin; ./find caused the shell to hang up uninterruptibly. My hypothesis was that all attempts at disk access were hanging up, but I didn't actually try a command like echo /proc/$$ or while read line; do echo $line; done < /var/log/syslog to verify this. Another possibility is that an essential system library is cached in memory and somehow failing to function properly. The second time I left the system running overnight and it didn't hang itself spontaneously. I'm not sure I have the patience to just twiddle with the running system until the condition reappears, and I'm, not sure what to do once it does. Clearly we can rule out a software cause. It seems disk access related, but clearly it's not permanent hard disk failure because the system will reboot just fine. What kind of hardware problem might produce these symptoms? Can it be a memory problem?

  Read the article

• Summer daylight time not changing on some active directory domain clients.

  - by Nick Gorbikoff

  We just had a summer daylight change in US. and pc's on my network are behaving strange, some of them change time and some didn't. My network: 2 locations both in Midwest, same time zone. Location 1: 120 pcs (windows xp & windows 200) , with 1 Active Direcotry Domain Controller on Windows 2003 Standard. A couple of windows 2000 servers (they up to date) the rest of the servers are Xen or Debian machines (all up to date) , Second location connected through OpenVPN link all pc's are running fine - but they are all connecting to our AD domain controller. Locaiton 2: 10 pcs, and a shared LAN NAS. Both of the routers/firewalls in both locations are pFsense boxes with ntp service running - but it's up to date. Tried all the usual suspects: I have all the latest updates installed restarted them domain controller is running fine most computers are running fine I have only one domain controller on my network also my firewall serves as ntp server (pfsense) but it's up to date. all of the linux machines are fine since they are querying firewall / router for the time. about 1/3 of my pcs are 1 hour behind. If I change them manually they just change back ( the way domain pc's are supposed to). I've tried everything but I can't think of anything else to try.

  Read the article

• Virtual hosting in lighttpd?

  - by lighttpdnewbie

  Ok, here it goes... I've seen some other posts dealing with this, but it didn't help that much. I am using windows XP. My problem is with trying to get lighttpd working with virtual hosts. Now, I managed to get everything up and working with the default /htdocs and the default page shows up just fine on the internet, but since I have several sites to host, I need virtual hosting. I managed to do it in apache, so I guessed it would work out just fine in lighttpd, but apparently I'm missing something. Ok, let's say I have domain (www.)example.org. I want everyone using that url going to the correct index.html, obviously. Let's say that index.html is in directory "websites/website1" placed under the lighttpd dir. (thus, the full path is c:/ProgramsFiles/lighttpd/websites/website1/index.html) Now: how, exactly, do I set up my virtual host (in the config file)? In detail, please, since I've tried for hours with the vague hints I got from fora and such, but it doesn't work. Also; is there something additional to do? Change the "server.bind" or get rid of the default server.document-root, or something? I appreciate all the help you can give! Especially if it's a verbatim/step-by-step solution you're offering! ;-p Edit: And, yes, my mod_simple_vhost has been enabled.

  Read the article

• How can I find which logon script is being run?

  - by user2517266

  I'm having an issue with network drives. Suddenly some computers and users aren't getting their mapped network drives from the logon script. I am NOT a domain admin, I don't have permission to login to the domain controller. And I know very little about Active Directory. The issue seems random, some users this day, different users tomorrow. Some computers run fine and some won't map no matter who logs in. They are mixed OS's XP (SP3), Vista, and 7. I was looking at the domain in windows explorer and I have found the batch file(s) that maps the drives in several locations, how do I know which one is actually being ran? The .bat file is located in \DOMAIN\NETLOGON\script.bat and \DOMAIN\SYSVOL\DOMAIN\scripts\script.bat and \DOMAIN\SYSVOL\DOMAIN\policies\GUID(Right? It's a crazy string)\User\Scripts\Logon\script.bat So, how can I figure out which one is actually being ran per computer or user? Cause they are all slightly different from each other and one of them doesn't map properly. Do all the files in NETLOGON get ran? Cause there are 15+ files in there. Or is it specified in Group Policy which one(s) get ran? EDIT: I am able to access a program called Active Directory Users and Computers, but the properties tab for any user is blank for the logon script.

  Read the article

• Connecting WD World Book to my new laptop using downloaded win 7 driver

  - by Jeanie

  HELP!!! I have just been reading through and seeing that you can connect using a USB straight to your laptop. This would be great is I actually had the cable! My problem is I have a lovely new laptop with windows 7 - I had to buy this as my old laptop isnt working anymore and I have just ordered an external sata enclosure to see whether I can get any inormation of the old drive and put onto my new laptop, so at least I don't lose any work. This in itself will probably present problems as my old OS was Windows XP! I will deal with that when i get to it!! My problem at present is that I have a World Book and I wish to connect and configure it to my new laptop but again I need to download drivers for Windows 7, which I believe I have done, but now I can't seem to work out just what to do next to help these 2 devices to recognize each other and configure. If anyone has any answers or could talk me through it I would be really grateful. Thanks - Jeanie

  Read the article

• How to manage enterprise network of Linux machines?

  - by killy9999

  I work at the university. In my institute we have six computer laboratories used for teaching. Each lab has almost 20 computers, which gives over 100 machines total. Computers have either Windows XP or Windows 7 Eneterprise operating system. We use Symantec Ghost to manage all the computers. Each computer has a Ghost client installed, which allows to control computers over network. Every six months we restore a master image on one of the computers in a lab, update that image and distribute it over the network to all computers in a laboratory. Thanks to Ghost client this is done automatically with just a few clicks. Recently I suggested that it would be good to have Linux installed in the laboratories. The administrators were concerned that we would not be able to manage that many computers if each would have to be updated manually. The question is: how to manage such a huge network of Linux machines in an automated way? To make the description of our network more complete I'll add that all students have their accounts (about few thousand users) on a central server. These are accessed via LDAP. To use a computer in laboratory each student has to log in using his own account.

  Read the article

< Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >