Search Results

Search found 22452 results on 899 pages for 'window xp'.

Page 325/899 | < Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >

  • Why ping another inet machine from MacBook get netgate's ip address?

    - by Xinwang
    I have three machine in my home network connected by a wireless router. One is server installed linux at 192.168.1.1, another is Thinkpad with MS Windows XP at 192.168.1.2, last one is MacBook Pro with Mac OS X 10.6.3 at 192.168.1.3. When I ping the Linux Server from Thinkpad (MS Windows XP) I can get the correct ip address, but when I ping it from Mac I get the global address of my router, like 61.135.181.175. Could you tell me why this happen? And how do I get same ping result on Mac and Windows. Thanks

    Read the article

  • Why is my Asus P5PL2-E using 640MB of RAM (out of 4GB) ? [closed]

    - by Tom
    Possible Duplicate: Windows XP and RAM 3.5GB+ I've recently installed 4GB of RAM on my server, which is running Windows XP SP2 32-bit and My Computer showed that only 3.37GB were installed. After digging Google for a bit, I couldn't find anything helpful, but I do remember reading a post in a forum regarding the motherboard using 640MB of RAM. Digging in my own BIOS, I've also found that my motherboard has also reserved that amount for its self. Why does my motherboard reserve this memory and how can I tune it down to say 128MB?

    Read the article

  • Windows 7 - Remote Desktop - multiple credentials

    - by w-
    Hi, My home network consists of a couple XP machines and a windows 7 box. One of the XP boxes is like a shared server accessed via Remote Desktop. I have an account on there and my gf has another. Previously I was able to save RDC shortcuts to this shared server including credentials. So in order to access the server from a computer on the network, i just needed to open the shortcut. I thus would have two shortcuts, one for my account and one for my gf's. In windows 7, it seems to store credentials for a box based on machine name. i.e. i can only store one set of credentials per machine name. This seems incredibly stupid so my question is: In windows 7, is there some way to have RDC shortcuts that use different credentials to login to the same target box? thanks

    Read the article

  • Very slow accessing printer shared from Windows Machine

    - by Tarski
    Hello, How do I go about debugging a networking problem where the office printer is shared off a Windows XP PC and is very slow from me to access? Print/changing any settings can take several minutes and applications often display "Not Responding" in this time. My machine is a Windows Vista PC. The other PCs in the office are either Vista or XP and do not suffer from any printing problems. I am not experiencing any other network related problems, I can access the web and e-mail fine. The printer is a HP officejet Pro 8000

    Read the article

  • Cannot Join a Domain on VM

    - by arvind0007
    Hi Guys. I have installed Windows 2003 server R2 on a VM. This VM is running on Windows XP PRO. When i try to make this XP Pro PC join the domain on the VM it tries to locate the server and gives me the following error message " The specified network name is no longer available", despite the fact that i can still see this domain on my network. can anyone help with this please. This is the very first time i am trying connecting a client to a VM server so hope am not doing anything wrong.. thanks

    Read the article

  • Problem with screen redrawing at DOS app in VmWare Player

    - by MicTech
    I have very old DOS Application (CadSoft Eagle - PCB Designer) and I want to work with it on my workstation with Windows 7. Then I install Windows 98 and that software into VmWare Player. But that software has serious problem with redrawing screen. It's very slow in comparison with my Intel Celeron 333MHz with Windows 98. I have same problem if I try to use DOSBox on Windows XP (same Celeron 333MHz). I also trying run this application directly on Windows XP (same Celeron 333MHz) with compatibility mod set to "Windows 98", but I get "(0Dh): General Protection Fault". Can someone give me good advice how I solve that?

    Read the article

  • how to connect virtual box os and local machine

    - by soul
    This question is in connection to this question asked by a user before: http://superuser.com/questions/73470/virtualbox-vdi-file-to-vmware On how to convert vdi to vmdk or vmx using vmware converter. How do I connect the windows xp that is in virtual box to the local computer (windows 7) in a network. Because I got this error while I tried following this instruction: Give the IP address, username and password of the remote machine that you would like to convert and then hit next I got this error in vmware converter: Unable to connect the specified host 10.0.2.15 which is the ip address of the xp machine inside virtual box. It also said that there is a network configuration problem. And when I inputted the ip address from whatismyip.com which should be the same as the ip address on local machine. I didn't get the previous error but I got another one, it said that: insufficient permissions to connect to "ip address" What solution can you suggest for this problem?

    Read the article

  • Windows 7 Natively on Mac OS X Bootcamp, Airport Wifi Unable To Connect

    - by Goober
    I am using a brand new MacBook Pro. I am running a copy of Windows 7 natively via bootcamp (No use of Virtual Machine Software at all). However the only way I can get Windows to connect to the internet is via ethernet, as opposed to the Macs Airport card picking up the wireless. It just refuses to connect, and gives me a limited access status. Any ideas!? I've run Windows XP natively via bootcamp and I had a few issues with the network constantly dropping out, however I blamed that on the drivers and the general shiteness of XP.... Help greatly appreciated.

    Read the article

  • Does Windows notice when a VM is moved around?

    - by Martin
    I'm thinking of migrating a Desktop machine (Windows XP) to a VM solution (VirtualBox or MS Virtual PC). The reason is that I need a new hardware anyways and I don't want to (cannot properly) reinstall all the "business" apps on there. So my plan goes as follows: I'll pull an image of the machine and restore it to a Virtual Machine using Acronis Universal Restore or some other tool that can restore to dissimilar hardware. (The process is largely irrelevant for this question I think.) Once I have this virtual machine properly running I'll move it to a new PC. So the question now is. Are there any caveats wrt. to Windows (XP?) being installed in a VM and the VM machine being moved around on different host computers? Can anything break in the OS inside the VM? Will there be troubles wrt. to Windows activation?

    Read the article

  • Windows Server 2008 Static IP Address

    - by Gauls
    I have Win 2008 Server VM and want to set static IP address so that i can RDP into instead of using VM player (mouse gets out of focus as the size of the VM increases). Now while making the changes i see two TC/IPv6 and TC/IPv4 i try changing the IPaddress from obtain autimatically, but it always goes to "Unidentified Network". If i leave it to automatically obtain IP,i still cannot RDP into it. I have tired disabling TC/IPv6 from reistry. Any other suggestions? BTW the same setting works fine with WIN XP and i can RDP into all Win XP VM's Cheers Gauls

    Read the article

  • Monitor "forgot" its native resolution overnight

    - by Ben
    I have: Hanns G HW173A monitor NVIDIA GTX 460 graphics card Windows XP SP3. It was working. Suddenly overnight I can no longer use my monitor's native resolution of 1440x900. It's not listed, and if I force it it only shows part of the screen. The only resolution that seems to fit the whole screen is now 1024x768. I have tried reinstalling the NVIDIA drivers as well as disabling and enabling the monitor drivers (for windows XP the monitor uses the microsoft "default monitor" drivers - this is what Hanns G says on their website too). Any ideas? Thanks very much.

    Read the article

  • Cannot Connect To VMWare Guest OS Using NEither RDP Nor

    - by Humanier
    Hi, I have a PC (Windows XP SP3) with VMWare Workstation 7 installed. The VMWare hosts Windows Server 2003 Enterprise Edition R2. RealVNC (4.1.3) is installed on both OS'es. Both of them use Hamachi2. Host OS (WinXP) also runs ZoneAlarm Firewall. Hamachi network is set as trusted. My goal is to allow RDP and VNC connections to be made to the guest OS (Windows Server 2003). Both options work absolutely fine if I connect from the host OS. However I have problems when other computers from our Hamachi network try to connect the guest OS (Win2K3). 1) RDP connections. RDP window opens, shows black content and after 15-20 seconds displays following error: http://lh6.ggpht.com/_yQhsRRimgKU/TArRrtiteQI/AAAAAAAABZA/e96za-y9wzo/rdp_error.JPG 2) RealVCN connections. Users are able to connect but all they see is a black screen inside VNC window. At the same their input (keystrokes or mouse moves/clicks) are visible when looking at the console window of the Win2K3. I really appreciate any ideas on how to resolve mentioned problems. Thank you in advance.

    Read the article

  • routing problems

    - by user174050
    I have an windows 7 laptop and I have installed openvpn 2.2x as client. The laptop has 2 ethernet cards, one of them is wireless. The wireless lan is 192.168.1.0/24 The Fix lan is 192.168.2.0/24 If I connect to the openvpn server useing the Fix lan the I can connect properly and for testing I ping to my openvpn server 10.0.0.1 that answers correctly. But if I connect to the openvpn server useing the wireless lan, I can establish the connection but pinging to the server isn´t possible. The packets goes allways lost. Why can this happen? In an other laptop where windows xp is installed and with the same lan configuratio everything works propperly. In both cases the firewall is configured to access the vnc server and the server directories useing samba. With the XP I have no problems. I will thank you for all help Ignacio

    Read the article

  • Remote connection to dynamic public ip & private ip addresses

    - by user51737
    Many times I connected to windows computer which has static public ip address via remote desktop over wan links. I'm wondering how could I connect to the remote computer that has dynamic public ip address & private ip addresses assigned. I've 2 systems at home: xp system-------connected to internet(dynamic public ip) & allowed other users to connected to the internet on the interface. windows vista system--------enabled dhcp on the interface to access internet from xp. How could I remotely connect from my office to the 'vista system'?. If I've a router/modem at my home it may be possible to allow the ports for the system but I don't. Any tips?

    Read the article

  • Cloning my Windows boot drive--Windows hangs on booting off new drive.

    - by idyllhands
    I copied my Windows XP partition to a new drive using GParted live CD (using the GUI). I made sure to flag it as boot, and then used my XP disc to enter Recovery Console and ran fixboot and fixmbr on it. Now, it will boot up to the Windows flash screen, but hangs at that point. Any suggestions on how to proceed? I am just trying to come up with a quick way to clone my system and make the drive bootable, and gParted seemed like the easiest way, but now I've been working on it for over an hour.

    Read the article

  • Run Active Directory Admin Center as another user

    - by dunxd
    I am trying to run Active Directory Admin Center (dsac.exe) on Windows 7 as another user by means of creating a shortcut, rather than having to Shift+Right click and specify the user. On Windows XP I could create a runas shortcut like this (forget for a moment that dsac.exe does not exist in Windows XP): runas /user:DOMAIN\user dsac.exe When I run this on Windows 7, the cmd style windows pops up and asks for the password for DOMAIN\user, but I get the following message: Attempting to start dsac.exe as user "DOMAIN\user" ... RUNAS ERROR: Unable to run - dsac.exe 740: The requested operation requires elevation. How do I get Windows 7 to automatically run dsac.exe as a specified user? I'm happy to fill in a password prompt for the specified user, but would be even happier if there was a solution that cached the password, so I didn't have to enter it more than once a day.

    Read the article

  • Apps won't start after vanilla reboot

    - by Daniel R Hicks
    I had Adobe and Norton nagging me to reboot, so I did that -- clicked Reboot from the Start button. Everything seemed pretty normal as it shut down and came back up, but once up a bunch of apps won't start. The first one I noticed was Firefox. It would flash the disk light normally, but never appear on the screen. Then I tried to bring up an OpenOffice Calc window and same thing. I tried to bring up MS Word, and the splash screen appeared, but never the main screen, and the splash screen just sat there, with a swirly over it. But I tried Solitaire, Notepad++, Paint, and several others, and they popped up just fine. And I'm typing this from IE 8, which, if anything, came up faster than usual. When I try to open up "Network and Sharing Center" the window appears, but nothing appears in it, and eventually it's tagged "not responding". When I kill that window I get (after a delay) "Windows Explorer is not responding", and when I say "OK" the screen resets. I tried rebooting again, and no joy -- same as before. Have done nothing particularly strange on this box, and it's not generally at significant risk for malware. I haven't installed anything new other than the afore-mentioned updates. One other thing: Several minutes after rebooting I get the message "Error: Unable to start Bluetooth Stack Service." The Bluetooth radio is turned on, and I rarely have anything Bluetooth attached, and I don't recall that I've ever seen this message before. Added: Looking at Event Viewer, I'm getting a lot of "The description for Event ID 1 from source xxx cannot be found." Is there any significance to this? Added: I'm looking at restoring from backup, but the procedure is, at best, unclear. Is it sufficient to restore from "Backup and Restore Center", or must I restore from the restore DVD first?

    Read the article

  • windows 2008 server spooler problem

    - by air
    i have one windows 2008 server & windows xp clients. one HP2600n is connected to network with network cable, and installed in server and shared. also same printer is shared on xp cleints. the problem is: once cleints send print it come to the server que and stuck there untill we manually restart printer spooler service. once we restart the service all the prints in QUE prints and after that new prints again stuck in QUE till next manually restart. how can we solve this problem? Thanks

    Read the article

  • HP 4530s: Fan is Always On even When Laptop/CPU is Idle

    - by tolitius
    Just bought an HP 4530s from newegg. Laptop is great, but.. The FAN is always on. I did some googling, found it is a known problem, but no easily googlable solution. Tried to: Update BIOS to the latest Disable "CPU fan always on when plugged in" BIOS setting Installed Windows 7 Home (came with), Live CDed Ubuntu, Windows XP Spent 2 hours with horrible HP support Some other things that I can't already recall = spent too much time on it Laptop is not refundable (learned it the hard way, after the fact, by looking at the NEWEGG clever policy that is hidden in "details") I would really appreciate a workable solution / workaround / hack. The laptop is for my friend who will most likely be running Windows XP/7.

    Read the article

  • What's faster for web-server virtualization ? (virtualbox or KVM)

    - by marc
    I have question, does anyone try to set up a webserver (debian) using virtualbox (x64) ? Right now i have few servers in KVM (x64) but i think it work slowly... Can i get something more (faster, performance) using virtualbox (x64)? On my home installation it looks very fast. Should i move to vbox against kvm ? I'm looking for answer from someone who have in virtualbox (x64) real server (can be headless) (debian/ubuntu) not windows xp or other home using things ;) I also got xp, 2k3, ubuntu in virtualbox (x86) and for me looking faster than kvm(x64). But it's hard to say anything without real tests done by multiple users not just one.

    Read the article

  • Installing additional printer drivers (x86) on Windows 7 (x64)

    - by ambrax
    I've successfully installed Windows 7 (x64) and drivers for my Canon MP510, and have no problem printing with this setup. There is another PC in the network running XP SP3, and I want to share the printer so that users of that PC can also print. On W7 I have the option of installing additional printer drivers for other system architectures (Itanium and x86). I've downloaded the most current 32-bit drivers for the printer, but every time I direct the install dialog to the folder containing the drivers, I get the following error message: Selected printer driver not found The specified location does not contain the driver Canon Inkjet MP510 Printer for the requested processor architecture. Retry Cancel I'm stumped. I'm absolutely certain that the specified location actually does contain the correct drivers; I've even installed them on the XP system. I've tried everything I can think of. What am I overlooking?

    Read the article

  • Restoring Mac-bootcamp-windows-partition image to Windows machine

    - by jpwagner
    Hi, I'm running Windows XP sp3 on my mac using bootcamp. Objective: I'd like to move this partition to a windows machine. This is what I tried: 1. create image using winclone 2. restore drive to disk partition on windows machine using paragon 3. reboot from new partition Results: it attempts to boot in XP (windows flag and progress bar load screen) but then gives me the old BSOD. safe mode just hangs while loading. (I then uninstalled KB977165 on a hunch, but that did nothing to help the issue.) Any ideas, advice, etc would be greatly appreciated. Thanks!

    Read the article

  • Pinnacle Studio 14 Importer crashes on Windows 7 x64

    - by Tuminoid
    Pinnacle Studio 14 Importer crashes on Windows 7 x64, thus I'm unable to import videos from my camcorder. I've Googled around and it seems to be a problem with x64 support in the program, but there is no info if it can somehow be remedied with Compatibility settings, XP mode. Further Googling got me this link, and none of the tips in site it links help. I've got no idea what ObjectDoct Plus 2 is (no a program or service installed by that name) which he claims causes the problem. Is that ObjectDoct critical to Pinnacle Studio and how to get rid of it (or any other advice how to make Studio 14 work on x64). UPDATE: 1) XP mode doesn't help as it doesn't handle Firewire, which is how my Canon HV20 must be connected to transfer HDV from tape. 2) I don't have that ObjectDock installed. 3) I don't wanna re-buy PS15 just to get this solved as PS14 should be able to do it.

    Read the article

  • Wake-On-Lan - is it possible to access boot menu?

    - by truthseeker
    Now imagine this situation. I have a computer which has 2 operating systems installed - Windows XP and Windows 7. On booting menu is displayed where I can select which operating system I want to load. When I do nothing, Windows 7 loads (after some delay). This computer is connected to LAN and has Wake-On-Lan function enabled. Is it possible to remotely select which operating system I wish to load? Now it is Windows 7. But sometimes I wish it would be Windows XP.

    Read the article

< Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >