Search Results

Search found 9340 results on 374 pages for 'andy boot'.

Page 326/374 | < Previous Page | 322 323 324 325 326 327 328 329 330 331 332 333  | Next Page >

• M-Audio Delta starts up at wrong sample rate

  - by steevc

  When the PC starts my M-Audio Delta 66 is using 48000kHz sampling rate when it is set for 44100 in Envy24. This causes audio to play slower than it should. This is in Kubuntu 14.04 on my new PC using an AMD A8 6500 with 8GB. When I first installed it seemed okay, but at some point it went wrong and has been doing this consistently since then. Kernel is 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:31:42 UTC 2014 i686 athlon i686 GNU/Linux steve@slarti:~$ cat /proc/asound/card2/pcm0p/sub0/hw_params access: MMAP_INTERLEAVED format: S32_LE subformat: STD channels: 10 rate: 48000 (48000/1) period_size: 441 buffer_size: 3528 I can get it to switch to 44100 if I disable/enable the Delta in Pulseaudio volume control, but I have to do this every day and the sound still seems distorted. I can't see any issues in any of the config or log files I can find. If I boot the PC with a Mint Live USB it starts at 44100 and sound fine. Originally reported on Youtube is playing at the wrong speed - maybe soundcard related, but I'll close that and have this more relevant question instead.

  Read the article

• Cities from Space: A Tour of Urban Planning Patterns

  - by Jason Fitzpatrick

  While many cities developed haphazardly and organically with little structured planning, other cities were developed following strict organization–organization that reveals itself beautifully when seen from space. Wired magazine shares a roundup of ten well-planned cities viewed with a satellite’s eye. Among the roundup our favorite is the oldest, seen in the photo above: This nine-pointed fortress is perhaps the best example of a planned city from the Renaissance. Palmanova was built in 1593 and is located in the northeastern corner of Italy near the border with Slovenia. It was intended to be home to a completely self-reliant utopian community that could also defend itself against the Ottomans. It had three guarded entrances, ramparts between each of the star points and eventually a moat. Sadly, nobody was willing to move there. Eventually it was used as free housing for pardoned criminals. Today it is a national monument, a tourist destination and home to around 5,000 people. Hit up the link below to check out the other nine well-planned entries in the roundup. How To Boot Your Android Phone or Tablet Into Safe Mode HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices

  Read the article

• Broadcom Wireless Issues in Lubuntu 14.04

  - by ratxinxaxcage67

  I recently installed Lubuntu 14.04 on my parents' old laptop, and I've been having a super difficult time getting the Broadcom card up and running. I've been following this thread: Installing Broadcom Wireless Drivers ...but I'm still stuck. lspci -vnn | grep Network showed: 06:05.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 02) iwconfig showed: lo no wireless extensions. eth0 no wireless extensions. I've installed b43-firmware-installer and b43-fwcutter and also the linux-firmware-nonfree package. At boot, I keep getting a b43-phy0 error, so I tried sudo rmmod b43, and I got: rmmod: ERROR: Module b43 is not currently loaded I also tried: dmesg | grep b43 [ 17.318405] b43legacy-phy0: Broadcom 4306 WLAN found (core revision 4) [ 17.384870] b43legacy-phy0: Loading firmware b43legacy/ucode4.fw [ 18.046777] b43legacy ssb0:0: Direct firmware load failed with error -2 [ 18.046785] b43legacy ssb0:0: Falling back to user helper [ 18.047858] b43legacy-phy0 ERROR: Firmware file "b43legacy/ucode4.fw" not found or load failed. [ 18.047965] b43legacy-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 3). I went to url it told me to, but it didn't tell me to do anything I haven't already tried. Any help and/or suggestions would be greatly appreciated!

  Read the article

• Banshee gapless playback does not work when playing mp3s

  - by ComputerGuy505

  Even though I have gapless playback enabled in Banshee's settings menu, there is a very short pause between songs. This might be due to the fact that my hard drive's partitions seem wierd. fdisk -l produces this output: Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x4a73c3cb Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 724153740 361872070+ 7 HPFS/NTFS/exFAT /dev/sda3 1456826368 1465145343 4159488 c W95 FAT32 (LBA) /dev/sda4 724154366 1456826367 366336001 5 Extended Partition 4 does not start on physical sector boundary. /dev/sda5 1440159744 1456826367 8333312 82 Linux swap / Solaris /dev/sda6 724154368 1440159743 358002688 83 Linux Partition table entries are not in disk order Playing mp3's from /dev/sda2 or /dev/sda6 produces this problem. I don't seem to have gapless playback on Rhythmbox or Clementine either, if those media players are supposed to have it. I'm not sure what other info to provide. This is just annoying to me. Thanks for any help.

  Read the article

• Music Manager that can properly see ID3 ratings tags and synchronize with Android

  - by Sebastian

  I'm moving from Windows 7 to Ubuntu, and so far the experience has been a really good one :) However, there is something that I've used to do with Windows 7 that I can't find how to do in Ubuntu: From my Windows music manager programs (either MediaMonkey or Windows Media Player) I could set song ratings in a way that the ratings set from either program could be also read from the other one. Additionally, song ratings were visible and updated in my iPod Touch when I synch'ed my music (either manually or using iTunes). To sum up, it seems that MediaMonkey, WMP, and the iPod device use standard mp3 metadata tag for ratings. Now, using Ubuntu 12.04, and now with an Android device: Rhythmbox can't see the song rates, despite those ratings can be seen by MediaMonkey and MS Music Player when I boot with Win7. Is this an issue I can fix with some setting? Is there any program I can use to accomplish this? What do you recommend to sync my music with Android (4.0, Galaxy s2), also keeping the song ratings information updated between Android and my PC? Thanks!!

  Read the article

• How do I fix "Ubuntu is running in low-graphics mode?"

  - by Tortoise

  First off, I'm running Ubuntu 10.04 on a 30gb partition, the rest of my hdd is for a vista partition. The way I installed this was, I shrunk the vista partition and installed Ubuntu in the largest block of free space. Ubuntu has been working fine for a few weeks, and I've loved it, but today I was doing something in Vista (something simple) and I restarted to go back into ubuntu, and when it tried to boot up I got a message that said: "Ubuntu is running in low-graphics mode. Your screen, graphics card, and input devices could not be detected correctly. You will have to configure these yourself." I click OK, and it gives me a few options but all of them are dead ends. Basically, I'm stuck in CLI right now without a clue of how to fix it. I've tried doing a full update and it hasn't made a difference. I've already been asking for help in #Ubuntu and #Radeon and I was directed by some of them here, so I hope I can find some answers here. Also, I'm using an ATI Radeon X1200. Any help would be greatly appreciated. Another thing, while I was trying to get help in #radeon I was told that it could possibly be this bug.

  Read the article

• How to Upgrade Windows 7 Easily (And Understand Whether You Should)

  - by The Geek

  Just the other day I was trying to use Remote Desktop to connect from my laptop in the living room to the desktop downstairs, when I realized that I couldn’t do it because the desktop was running Windows Home Premium—that’s when I realized we’d never covered how to upgrade Windows, so here you are. You can upgrade from any version of Windows to the next version up, but it’s obviously going to cost a bit of money, and there’s a very good chance that you’ll have no reason to upgrade. Keep reading for the differences between the versions, whether you should bother upgrading, and how to actually do it Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 Take Better Panoramic Photos with Any Camera Make Creating App Tabs Easier in Firefox Peach and Zelda Discuss the Benefits and Perks of Being Kidnapped [Video] The Life of Gadgets in Price and Popularity [Infographic] Apture Highlights Turns Your Cursor into a Search Tool Add Classic Sci-Fi Goodness to Your Desktop with the Matrix Theme for Windows 7

  Read the article

• HP G42 Ubuntu live cd failure

  - by Jon

  Ok, I have tried every option under the sun. I have surfed through the internet for a good 3 hours straight and to no effect. I installed ubuntu on my HP G42 laptop, it worked fine, then when I tried installing the standard after installation updates my wifi failed. In my attempt to fix my wi-fi I rebooted my laptop, when I rebooted I was stuck on a black screen with nothing that I tried to fix it helping the situation. So I then tried to fix it by reinstalling Ubuntu. When I attempted to boot into the live ccd it failed leaving with the now familar black screen. After numerous attempts using instructions from live cd and instal failure blank screen... page and replacing my hard drive at a cost of $65 I am coming here for help. As for the actual DVD that I tried installing ubuntu from it was able to install ubuntu on a mac just fine after my issues on the HP. After installing the hard drive I loaded up windows just fine but I don't want windows I want ubuntu, can you please provide instructions on how to install ubuntu?

  Read the article

• Partition does not start on physical sector boundary?

  - by jasmines

  I've one HD on my laptop, with two partitions (one ext3 with Ubuntu 12.04 installed and one swap). fdisk is giving me a Partition 1 does not start on physical sector boundary warning. What is the cause and do I need to fix it? If so, how? This is sudo fdisk -l: Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 testine, 63 settori/tracce, 91201 cilindri, totale 1465149168 settori Unità = settori di 1 * 512 = 512 byte Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Identificativo disco: 0x5a25087f Dispositivo Boot Start End Blocks Id System /dev/sda1 * 63 1448577023 724288480+ 83 Linux Partition 1 does not start on physical sector boundary. /dev/sda2 1448577024 1465147391 8285184 82 Linux swap / Solaris This is sudo lshw related result: *-disk description: ATA Disk product: WDC WD7500BPKT-0 vendor: Western Digital physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WX21CC1T0847 size: 698GiB (750GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=5a25087f *-volume:0 description: EXT3 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: cc5c562a-bc59-4a37-b589-805b27b2cbd7 size: 690GiB capacity: 690GiB capabilities: primary bootable journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-27 09:18:28 filesystem=ext3 modified=2012-06-23 18:33:59 mount.fstype=ext3 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered mounted=2012-06-28 00:20:47 state=mounted *-volume:1 description: Linux swap volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 1 serial: 16a7fee0-be9e-4e34-9dc3-28f4eeb61bf6 size: 8091MiB capacity: 8091MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 These are related /etc/fstab lines: UUID=cc5c562a-bc59-4a37-b589-805b27b2cbd7 / ext3 errors=remount-ro,user_xattr 0 1 UUID=16a7fee0-be9e-4e34-9dc3-28f4eeb61bf6 none swap sw 0 0

  Read the article

• Getting file system free space

  - by Fred Riley

  This isn't a problem as such, more a request for information based on ignorance of the Linux filesystem. The very short question is: How do I find out how much free and used space there is on the volume from which Ubuntu is running? More detail: I'm running Ubuntu 12.04 from a 64Gb USB3 stick, created from booting up a year-old Ubuntu 12.04 DVD and running Startup Disk Creator. The reason for this is that the Master Boot Record on my hard disk, holding Windoze 7, has gone belly-up, and whilst awaiting a recovery disk I'm running Ubunto off USB or DVD as a 'trial'. (And will continue to run Ubuntu after restoring Windoze, as I've rediscovered my love of the penguin :o)) After installing Ubuntu on the stick I ran the software update app, which downloaded some 450Mb of updates and took a couple of hours to install to the stick. A couple of times I got a message saying that disk space was short. So I looked in the file manager (or whatever it's called these days) and couldn't see the stick listed, just: SYSTEM hard disk (listed as 479Gb Filesystem) two other partitions that had been created by Windoze "4.3GB Filesystem" which when I try to open gives the error "Could not find /cow", and when I try to unmount it tells me I can't because it's not mounted - D'OH!! Edit: screenshot of file manager Edit: screenshot of low disk space warning What I can't see is the USB stick from which I'm running Ubuntu. Where's it gone, anybody know? This is tangentially related to a previous question of mine about system tools, in that I'm trying to get control and knowledge of the system in the newest incarnation of Ubuntu.

  Read the article

• How to mount drive in /media/userName/ like nautilus do using udisks

  - by Bsienn

  As of my current installation of Ubuntu 13.10 Unity, when i click on a drive in nautilus it get mounted in /media/username/mountedDrive i read that nautilus use udisks to do that. Basically i want to auto mount my drive using udisks in start up using this method But problem is, it mounts the drive in /media/mountedDrive, but i want it the way nautilus do in /media/username/mounteDrive I want NTFS Data drive to be auto mounted at /media/bsienn/ bsienn@bsienn-desktop:~$ blkid /dev/sda1: LABEL="System Reserved" UUID="8230744030743D6B" TYPE="ntfs" /dev/sda2: LABEL="Windows 7" UUID="60100EA5100E81F0" TYPE="ntfs" /dev/sda3: LABEL="Data" UUID="882C04092C03F14C" TYPE="ntfs" /dev/sda5: UUID="8768800f-59e1-41a2-9092-c0a8cb60dabf" TYPE="swap" /dev/sda6: LABEL="Ubuntu Drive" UUID="13ea474a-fb27-4c91-bae7-c45690f88954" TYPE="ext4" /dev/sda7: UUID="69c22e73-9f64-4b48-b854-7b121642cd5d" TYPE="ext4" bsienn@bsienn-desktop:~$ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160000000000 bytes 255 heads, 63 sectors/track, 19452 cylinders, total 312500000 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x8d528d52 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 117730069 58761611 7 HPFS/NTFS/exFAT /dev/sda3 158690072 312494116 76902022+ 7 HPFS/NTFS/exFAT /dev/sda4 117731326 158689279 20478977 5 Extended /dev/sda5 137263104 141260799 1998848 82 Linux swap / Solaris /dev/sda6 141262848 158689279 8713216 83 Linux /dev/sda7 117731328 137263103 9765888 83 Linux Partition table entries are not in disk order bsienn@bsienn-desktop:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda7 during installation UUID=69c22e73-9f64-4b48-b854-7b121642cd5d / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=8768800f-59e1-41a2-9092-c0a8cb60dabf none swap sw 0 0 Desired effect: Picture link

  Read the article

• Five years old Ubuntu system - dist-upgrades always went fine, however some tasks remain

  - by knb

  I have a PC with a current Ubuntu distribution installed. I've upgraded many times since 5.10. It always went well, however some tools or features were kind of left behind in a unsatisfactory state: grub to grub2 - is it an really necessary to switch the boot loader some time to grub2. Upgrading this scares me abit. I still have ext3 devices - is it worth upgrading to ext4? should I wait for btrfs? hibernation and suspend- it only worked in 5.10, since 6.04 it was messed up. Should I really care? Any chance to repair this myself? Simply by cleanup or hacking config files. It is a desktop PC after all. So energy saving functionality is not really needed. I am using vmware workstation 6.5 and the latest kernel that supports it is 2.6.32. This is my default kernel now, ignoring 2.6.35. Am I missing anything important in the new kernel now?

  Read the article

• Game crash/Screen freeze recovery (without shell or reboot)

  - by Asavar Tzeth

  I am an old Windows PC gamer, now converted into Ubuntu (Linux) lover. I am even going so far as to attempt to replace all my games in a Windows dual-boot with Wine and it is going well. However... Even if Linux is less prone to crashing, games, especially the windows ones (but also a few native) can crash. My problem is when this is in full screen and the computer becomes non-responsive. In Windows you can solve this with ctrl+alt+delete, but Ubuntu lacks this feature and my only choice is a reboot. Is there any Ubuntu version of this feature? Of course excepting the ctrl+alt+F1, find and kill process method. It is fine if you know how to do it, but too slow and difficult for the typical gamer. I believe strongly in Ubuntu as the future gaming platform in one form or another. If this feature does not exist, then the Ubuntu team should address this as fast as possible, since it is critical for all old Windows gamers. Thank you for your time. Asavar Tzeth (Alias)

  Read the article

• Why won't my graphics work in Ubuntu 12.04 LTS?

  - by user170974

  I'm very new to Ubuntu and to Linux in general, and took the leap and formatted my PC to Ubuntu 12.04 LTS very recently :) I seem to be having some trouble getting my graphics card to run properly, I looked over what information I could find but I still cannot get it up and running and figured this was a good place to ask for help. The information I can find on my graphics is as follows: (Terminal command) lspci outputs: 01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS880M [Mobility Radeon HD 4225/4250] 02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Madison [Mobility Radeon HD 5650/5750 / 6530M/6550M] I tried using a mixture of the following links: How do I fix my installation of ATI Catalyst Video Driver in 12.04 LTS? What is the correct way to install ATI Catalyst Video Drivers (fglrx)? Ubuntu Precise Installation Guide But it does not seem to work, since running fglrxinfo in terminal gives: display: :0.0 screen: 0 OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x301) OpenGL version string: 1.4 (2.1 Mesa 9.0.3) What am I doing wrong here? All help appreciated ;) Edit: I have tried the legacy driver from www2.ati.com/drivers/linux/amd-driver-installer-catalyst-13-4-linux-x86.x86_64.zip I also tried the guide at https://launchpad.net/~makson96/+archive/fglrx which caused the system to crash (blackscreen, no boot) Neither seemed to work. I did however reinstall ubuntu 12.04 LTS, and re-tried both with no success. Reintalling ubuntu did however fix the broken dependencies problems, etc.

  Read the article

• How do I get 1366x768 resolution on 12.04?

  - by Megan

  I am on an HP Envy 14, and the proper resolution that I should be using is 1366x768. This is not an option and I am stuck on 1024x768. I am using Linux 12.04. lspci | grep VGA: 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Madison [Radeon HD 5000M Series] I've tried to add the resolution as a mode in xorg.conf but that does not work. Please any help would be appreciated. I'm new to Linux and just got my dual boot working but this resolution issue is killing me. Edit1 I just tried using the xrandr command: xrandr --newmode "1368x768_60.00" 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync But I get an error: xrandr: Failed to get size of gamma for output default Edit2 lsmod returns the following: Module Size Used by vesafb 13844 1 rfcomm 47604 12 bnep 18281 2 parport_pc 32866 0 ppdev 17113 0 snd_hda_codec_hdmi 32474 1 arc4 12529 2 joydev 17693 0 hid_logitech_dj 18594 0 i915 472941 5 uvcvideo 72627 0 usbhid 47199 1 hid_logitech_dj hid 99559 2 hid_logitech_dj,usbhid psmouse 87692 0 iwlwifi 332525 0 mac80211 506816 1 iwlwifi videodev 98259 1 uvcvideo snd_hda_codec_idt 70795 1 mei 41616 0 btusb 18288 2 v4l2_compat_ioctl32 17128 1 videodev hp_accel 25976 0 lis3lv02d 19876 1 hp_accel hp_wmi 18092 0 sparse_keymap 13890 1 hp_wmi input_polldev 13896 1 lis3lv02d drm_kms_helper 46978 1 i915 drm 242038 2 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 serio_raw 13211 0 snd_hda_intel 33773 5 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec bluetooth 180104 23 rfcomm,bnep,btusb cfg80211 205544 2 iwlwifi,mac80211 snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec mac_hid 13253 0 snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event fglrx 3263886 0 snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_ra wmidi,snd_seq,snd_timer,snd_seq_device wmi 19256 1 hp_wmi video 19596 1 i915 intel_ips 18174 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62099 0 I have installed ATI/AMD proprietary FGLRX graphics driver. But there is another one called ATI/AMD proprietary FGLRX graphics driver (post-release updates) which I have trouble installing because it gives me an error and tells me to look at some sort of jockey log.

  Read the article

• SSD on USB 3.0 doesnt always mount

  - by juergen

  I would like to ask you for some support for this issue. The SSD I use is apparently slightly damaged. Atm it shows this popular Corsair Series 3 problem. symptom: the disk is working for some minutes and then just suddenly stops. Two months ago it worked like a charm. This was my boot device in these days. So now I still need to copy some data out of the device which leads me to my question. Usually the SSD is working again for some minutes, when i unplug and replug its power. It gets detected by the system again and I can continue my backup. The problem on Ubuntu is, that it is not recognized again after two or three replugs. I have to reboot to bring it back. To specify this situation: when i unplug and replug my USB mouse before i reboot it is not recognized as well. So something seems to be wrong with the system also. my question: how do i fix this rebooting issue? I will post all the logs you need to analyse. The problem doesnt depend on the interface. I tried USB3.0, 2.0 and Sata already. Thank you! cheers my system: Ubuntu 11.10, Gigabyte G41MT-S2P, Intel E6750 Corsair Force Series 2 - F120, Digitus USB 3.0 Adapter, USB 3.0 interface card

  Read the article

• How to set an old view? [closed]

  - by xan

  Possible Duplicate: How to revert to GNOME Classic? is it possible to change general view in Ubuntu 12.04 so it was like in Ubuntu 10.04? I really liked old one and really don't like new one. Things that are annoying me: menu on the left with large icons lack of workspaces icons in right bottom corner lack of menu: Applications, Places, System in left top corner menu like: file | edit | view | help resize and red cross is available in all applications at the very top of the pulpit, unless at the very top of the application window I know it may sound crazy, but that's all me, don't like changes despite that I know they are often good. I would be very grateful for any help. I really want old view (exactly like here: http://upload.wikimedia.org/wikipedia/commons/2/2d/UbuntuMaverickDesktop.png) back. By the way, if I installed Ubuntu 12.04 by WUBI from Windows level on separated partition, then what is the easiest way to uninstall it? Can I simply format this partition? I'm wondering because I don't know if it is safe, what about boot loader etc.

  Read the article

• Ubuntu Server 12.04, NAT, Router, DNS. It just doesnt work

  - by Bjørnar Kibsgaard

  I recently inherited some server hardware from work and decided that it could be my main router at home (among other things). Ubuntu 12.04 server installation harware wise goes well and everything is found and working when I boot up. So I begin with setting up eth1 with DHCP. This works fine and it gets a public IP address from my modem and we have a working internet connection. Then I set up my other NIC (eth0) as static (192.168.0.1) and this also works fine. I can access it from other computers in the network. The problems are coming when I am trying to set up a DHCP server with isc-dhcp-server. It seems like it is working and giving the computers IP adresses but after one reboot it stops working. After the reboot eth1 will get a public ip from the modem but it doesnt have internet access. I have to manually run dhcpcd eth1 to get it to work again. As far as I know I havent made any changes to DNS. What am I doing wrong? I have never really had problems with this before. :)

  Read the article

• how do I fix ati driver issue

  - by Michael

  I have little knowledge about ubuntu, but I am learning. Recently, my ubuntu 12.04 required that I update. I noticed that it was updating xorg and other things, after the update I was asked to reboot. I did. now when I start that computer up, it cannot detect any display and refuses to boot from usb. I have no idea how to recover my computer. It simply starts in what is akin to the terminal program and ask for my username and password. After that, I can enter commands. The problem may be because I manually installed drivers by copy pasting from some instructional that I now have no idea where they are, but what it amounts to is that I "built" the drivers. They were working GREAT until this update. I did this because otherwise I was unable to have sound through my hdmi. After I hand built the drivers, they worked great. After this update Ka-blam! nothing... Also, I had okay-ed lots of update sources (though all of them [xorg and such] were the stable versions, not the unstable update sources) Please help and thank you in advance. (if this is posted incorrectly or misplace, please let me know what to do)

  Read the article

• Screen going black, further investigation reveals healthy ram and hard disk, and several kernel oops logs

  - by Virulan

  Six days ago, I went to go take a shower, and I suspended Ubuntu as usual, to save battery life. I came back, and the screen was black. REISUB and general fiddling around did nothing. Restarted, and still had nothing on the screen. Since then, this has happened several times, and the only fix is to 1) force shut laptop, 2) take out battery, 3) hold power button, 4) put battery back in, 5) boot. I have investigated further into the matter, doing a ram test and a hard disk check. Both turned out fine, but then my attention turned towards the error messages I was receiving upon bootup, the whole "System program problem detected" dealio. I did some digging and found four kernel oops logs in my /var/crash. What I can understand of them points to two things, 1) they are connected to my suspending problems, since there are four them (I have had four suspending crashes), and they both confirm that there was a issue with waking up from suspend, and 2) the crashes might have to do with Python (possibly could be jumping to conclusions), since mentions of Python are peppered throughout the logs. At this point, I am unsure of how to continue, and I have come here for help. Is there any way I can fix this? Should I start by uploading the logs here?

  Read the article

• Error -12 hibernation image. Not enough free memory (sometimes)

  - by user99306

  I am having a problem with hibernation in Ubuntu 12.10, it had worked fine in 12.04. When I try and hibernate it sometimes appears to hibernate throws up an error and returns me to the desktop. The error I get is this: PM: Creating hibernation image: PM: Need to copy 375021 pages PM: Normal pages needed: 117957 + 1024, available pages: 110205 PM: Not enough free memory PM: Error -12 creating hibernation image Now I understand what the error means, but it doesn't make sense. My swap file is 5GB and is seldom ever used as I have 4GB of RAM. I know it is recommended to have 1.5 times more swap than RAM etc, but space doesn't seem to be the problem, despite the error. For example, I rarely use more than about 25%-30% of my RAM, yet still have the problem above. Moreover on a fresh boot and login, with no programs open and using only about 12% of RAM, I can get the above error - yet at other times I can hibernate whilst using 25% of my RAM. Also if I keep trying to hibernate, it eventually does after throwing up the above error four or five times. A successful hibernation looks like this: PM: Creating hibernation image: PM: Need to copy 295511 pages PM: Normal pages needed: 95534 + 1024, available pages: 132627 Is there some setting that I need to tweak or something I need to do before hibernating to avoid this problem? I guess the question could be better interpreted as: Is there some way of safely flushing the buffers and the cache before hibernation? Other than attempting to hibernate several times until it is successful! Thanks in advance.

  Read the article

• GUI based backup utility [closed]

  - by Chethan S.

  Possible Duplicate: Comparison of backup tools I have read favorable reviews for 'Back In Time' for the purpose stated above. Still I am posting this question as I have some demands in my mind. Few years back I was using ThinkVantage Rescue and Recovery by IBM on my Lenovo PC under Windows. That provided me nice features like compressed backups, boot time options - OS Repair, Restore entire OS, restore entire system to an older date, restore individual files etc. Out of these the feature I liked the most was compressed backups. Similar features are available in software like Norton Ghost too. In Back In Time I was surprised to see that the snapshot takes up same amount of space as that of the original contents, no compression at all. Furthermore, I was not able to find options to change the compression ratio etc. under settings. According to me compression of backups is a must have feature. Therefore, can anyone suggest me any other utility which can serve the purpose. I insist on GUI based tool since I don't want to mess up with backups!

  Read the article

• Live CD installer gets stuck with a grayed out forward button.

  - by TRiG

  I have a CD with Ubuntu 10.10 and a laptop with Ubuntu 8.10. The laptop had all sorts of crud on it, and anything I wanted to keep was backed up on an external drive, so I was happy to do a wipe and reinstall instead of an update. So after a bit of faffing about trying to work out how to get the thing to boot from the CD drive, I did that. So the screen comes up with the choice: the options are Try Ubuntu and Install Ubuntu. I choose to install and to overwrite my current installation. So far so good. I then get a progress bar labelled something like copying files (I forget the exact wording) and further options to fill in for my location, keyboard locale, username and password. On each of these screens there are forward and back buttons. On the last screen (password), the forward button is greyed out. Well, I think to myself, no doubt it will become active when that copying files progress bar completes. The progress bar never completes. It hangs. And the label changes from copying files to the chirpy ready when you are. The forward button remains greyed out. The back button is as unhelpful as you'd expect it to be. And there's nothing else to click. We have reached an impasse. I tried restarting the laptop, to test whether it actually was properly installed. It wasn't. I tried to run Ubuntu live from the CD, to test whether the disk was damaged. That wouldn't work either, but I suspect it's just because the laptop is old and has a slow disk drive. I'm typing this question on another computer using the Ubuntu live CD and it's working fine. So there's nothing wrong with the CD.

  Read the article

• Intermittent freezing on a Macbook Pro 7,1

  - by LR0

  I recently installed Ubuntu 12.10 on my MacBook Pro 7, 1. I used to have 11.10 on it. I've encountered a problem were I can boot up and the login screen works flawlessly. When I attempt to log into my account I set up during install it would only show the default wallpaper and the mouse was frozen. In other words it was logging on but froze up. Is what it seems like. When I rebooted I attempted to log into the guest account. I was able to log in and it seemed everything worked so I tried to update everything figuring it may be the problem. After updating and restarting as prompted I tried to login to my account. It still froze up but this time showing "glitched up" (you can see the dock and status bar but they don't look like they should) and still freezes. This is all happening on the guest account to. I was unable to find a similar article on the Internet therefore I am asking; Any thoughts Ubuntu?

  Read the article

• Is there a schematic overview of Ubuntu's architecture?

  - by joebuntu

  Hi there, as enthusiastic, advanced Linux learner, I'd love to get an overview about Linux' architecure/structure in general. You know, like "the big picture". I'm thinking of a large schematic graphic showing what is what, who is who, what system (e.g. X) comprises which subsystems (GDM/Gnome/Compiz) on the way from a to z, from boot to interactive desktop, including the most important background services (auth, network, cron, ...). Maybe a bit like this: http://www.flickr.com/photos/pgc/140859386/ but way more detailed. There's bootchart, which produces very comprehensive charts, but they again are too detailed and difficult to get the "big picture" from. Is there such a thing? Possibly not for the whole System, but maybe for single subsystems? I had trouble searching for this, because using search terms like "scheme" or "architecture" pointed to the wrong direction (a tool called "scheme" or CAD software for linux). I appreciate any links. If there's interest in those schematic overviews and links, maybe someone could turn this post into a wiki post? Cheers, joebuntu

  Read the article

< Previous Page | 322 323 324 325 326 327 328 329 330 331 332 333  | Next Page >