Search Results

Search found 9340 results on 374 pages for 'andy boot'.

Page 327/374 | < Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >

• Updated 12.04 and now Xorg is dead from NVidia drivers

  - by Xatolos

  I updated (August 16) Ubuntu 12.04 today and while I admit I didn't look what was being updated, it was large enough to have had an NVidia update in it. Problem is later on when I turned on my laptop again it won't boot into a GUI, just to the terminal (which I don't really know much of how to do anything). Now I have been able to log in and type "startx" to start up the GUI and now its complaining that my NVidia driver (if I remember correctly) is listed as being version 304.(number) and the version installed/found is version 295.(number). I don't know how this happened and now I'm stuck. I have no idea how it happened and don't know how to fix. Does anyone have any ideas? I have only access to wifi internet and no idea how to log on without the GUI so getting a new NVidia package isn't something I would know how to do even... Any and all help would be highly appreciated. edit: If it helps, I'm using a ASUS G Series G53JW-A1 http://www.newegg.com/Product/Product.aspx?Item=N82E16834220861

  Read the article

• Ubuntu 12.04 LTX Install Problems (See post for system build details.)

  - by Lokitez

  This is my first ever attempt at working with Ubuntu. I have only ever installed Windows in the past and that may be the problem. I purchased all new hardware this week and I would really like to give Ubuntu a chance (especially since I don't want to buy another Windows license). First, the hardware: AMD FX-8150 Zambezi 3.6GHz Socket AM3+ 125W Eight-Core Desktop Processor ASUS Crosshair V Formula AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Gaming Motherboard SAMSUNG 830 Series MZ-7PC128D/AM 2.5" 128GB SATA III MLC Internal Solid State Drive (SSD) - This is my intended boot drive. Western Digital VelociRaptor WD5000HHTZ 500GB 10000 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive - This is a backup drive that I have installed Windows Vista on until I can get Ubuntu to work. G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) ASUS HD7850-DC2-2GD5 Radeon HD 7850 2GB 256-bit GDDR5 PCI Express 3.0 x16 I have downloaded and tried to install both Ubuntu 64 bit and Kubuntu 64 bit (both 12.04). Both will always fail to copy a file during install or otherwise lockup during install to the SSD. I have burned two copies of the Ubuntu 12.04 and had the install fail with both. I have installed Vista onto the HDD. Is it possible to mount the Ubuntu file into

  Read the article

• Bad Performance With Games Under Wine in Ubuntu 12.04

  - by Pandem

  I'm somewhat new to Linux. I've dabbled with it before but never more than just experimentation in a VM or dual boot where I almost always reverted back to Windows soon after (more due to a lack of commitment than a dislike for the OS). Anyway my problem is that in the two games (Guild Wars and Team Fortress 2) I've tried so far I get fairly bad performance. Despite both games having a "Platinum" rating I've still been forced to run both in DirectX 8, otherwise they either crash, have texture defects or the UI is missing. By "bad performance" I mean sub-30 FPS where there are some players and regular large framerate drops with video settings on low. Currently in my mind I believe the performance issues are just a problem with the drivers because my graphics card is a AMD 7850 which is virtually brand new and probably not properly supported yet but I'm unsure and would appreciate advice or tips to improve things. I have Ubuntu 12.04 installed and I am usually logged in a Gnome Classic session. I have installed AMD's proprietary drivers (Catalyst version 12.4) and have Wine 1.4 installed. I have used Winetricks to install DX9/DX10 dlls and other things.

  Read the article

• How do I 'see' an external USB drive connected directly to my Broadband Router?

  - by The Cougar Kid

  This is a very frustrating problem! I have a small home network with several dual boot Ubuntu / Windows computers. I have recently upgraded my Broadband connection and the new router permits the direct attachment of an external USB drive which can back up all of the household's computers. There are no problems when booted under Windows, and there were no problems with older versions of UBUNTU, but since upgrading to 11.10 I can no longer "see" the drive. I used to find it via Network / Windows Network / Home / name of Router, but under 11.10 the same method yields an error message Unable to mount location Failed to retrieve share list from server. Can anyone help please? Starting Nmap 5.21 ( http://nmap.org ) at 2011-12-21 10:06 GMT Stats: 0:02:02 elapsed; 0 hosts completed (1 up), 1 undergoing Service Scan Service scan Timing: About 50.00% done; ETC: 10:10 (0:01:56 remaining) Nmap scan report for 192.168.1.254 Host is up (0.0097s latency). Not shown: 998 filtered ports PORT STATE SERVICE VERSION 554/tcp open rtsp? 7070/tcp open realserver? Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 152.38 seconds sudo tail -n 30 /var/log/syslog [sudo] password for alaric: Dec 21 10:05:42 UPSTAIRS2U wpa_supplicant[882]: WPA: Group rekeying completed with 00:01:3b:8b:63:1a [GTK=TKIP]

  Read the article

• Wifi doesn't connect if I'm upstairs

  - by user11233

  Hello there, I'm finding that Wifi connects when I'm in the living room, where the internet router etc is. But if I try to connect upstairs it is a no go. Booting in Windows 7 (dual boot :D ) I find that Wifi connects. I find this very confusing and have it since the install. Please help! Kind regards. #sudo lshw -c network *-network description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 00:21:5d:1a:63:58 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=2.6.35-26-generic firmware=8.24.2.12 ip=10.0.0.4 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg resources: irq:49 memory:de200000-de201fff Hope it helps! Hello guys, just tried to connect internet upstairs and to my surprise it does connect. Don't know exactly why. Only thing I've done recently is input the codes said bij Oli. Two things I've done on my own 1: installed Jupiter and 2: installed laptop-mode-tools. I really don't know if this can effect my internet but it's the only thing I can think of. Thanks for all the help, really appreciate it :) PS If someone thinks it might be helpful for others I would like to help find a 'real' solution to this problem. Just post down what I need to post here and I will try my best to help.

  Read the article

• Is there a NVIDIA driver (for a 7-series card) that will actually work for 12.10?

  - by DS13

  I see many similar topics on this, but I've tried all their suggestions, and nothing has worked. ISSUE: I do a clean install of Ubuntu 12.10. Boots fine with the “nouveau” graphics driver – graphics are very slow and choppy. The three other driver options in Ubuntu (official NVIDIA drivers), all result in a variation of the black screen on boot up. There will be NO access to a command line/GUI in anyway what-so-ever (tried every option recommended out there, but the system is unusable at this stage). I can only reinstall, and try different drivers…and I only ever get one shot at it. QUESTIONS: Does anyone know of a NVIDIA driver that will actually work with a Nvidia GeForce 7350LE? Or a 7-series card in general? This is my second computer, and I’m just trying to get a working install of Ubuntu on it. I don’t want to put much money into it, as I have seen Ubuntu run great on much older/less capable machines. I’ve got a decent Intel processor (2.3Ghz), 2GB of RAM, 320GB hard drive, 32-bit architecture, and there is no other O/S installed. It appears as if the graphics card is holding me back. Should I just buy a cheap graphics card (non-NVIDIA) to put in as a replacement? TRIED SO FAR: -all drivers available in Ubuntu *all fail -manual install of some different NVIDIA drivers *all fail -also tried installing the generic kernel, Nvidia driver doesn't work in 12.10 *no difference -every method suggested to at least get a command line after switching to a NVIDIA driver *all fail

  Read the article

• Wireless switch on Dell XT2 - strange behaviour of rfkill

  - by DyP

  I have an Dell Latitude XT2 using an Intel WLAN card (lspci lists it as "Intel Corporation Ultimate N WiFi Link 5300") running Lubuntu 12.04 with recent updates. The laptop has a hardware WLAN switch. I have problems activating the WLAN when booting with the hardware switch set to "off". The situation is a bit confusing, unfortunately. rfkill lists two WLAN devices (though lspci only shows the Intel one). This is the situation when booting with the hardware switch set to "Off": 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes From some tests, I conclude WLAN is only activated when both, the dell-wifi and phy0, are unblocked by soft- and hardware. But I can only unblock dell-wifi after the hardware switch is set to "on". Procedure right from boot with hardware switch set to "Off": Soft-unblocking phy0 works as expected. Could be done by start-up script. sudo rfkill unblock 0: nothing happens. Soft block of dell-wifi not removed. Set the hardware switch to "on": phy0 gets its hard block removed. Still no WLAN. sudo rfkill unblock 0: both the soft and hard lock of dell-wifi are removed. WLAN is now active and works. sudo rfkill block 0: only adds the soft block as expected. WLAN goes off again. So, in order to activate WLAN, I have to use the hardware switch and afterwards (manually) run a script - that's a bit inconvenient. Does someone know a better solution? Maybe a daemon could help that listens to rfkill events to unblock dell-wifi after I have set the hardware switch to "on"? (sounds like another workaround) When booting with the hardware switch set to "On", nothing is blocked neither hard nor soft.

  Read the article

• Problems after installing a plethora of updates

  - by box

  yesterday I decided to install 32-bit Ubuntu on my 64-bit desktop, first of all, is that a problem? After installing, i had around 270 updates to install, according to the update manager. I was having trouble launching a game with WINE, so I thought updating might help. After updating, I restarted my computer, and after a long while it showed me my desktop and the icon's on it, but I didn't get anything else. I didn't have the "taskbar" (not sure what it's called, sue me) on the left side, nor the bar at the top. I also received an error message saying some program had stopped working. I decided to restart my computer again, and that was when it told me that i have to re-configure my drivers, or run in "Low Graphics" mode for one session, amongst other options. Well, I decided to try to revert to the "basic video drivers", which was an option it gave. Restarting the computer gave me the same problem as in the second paragraph. After a few more restarts and a night of restless sleep, here I am trying to start my computer again, only to receive a black screen, and my monitor "going to sleep". I'm sort of stumped here, being new to Ubuntu (desktop, at least) and I really hope this gets fixed without me having to install Ubuntu on yet another partition (I have three other partitions for various things already) tl;dr: Black screen on boot after installing updates.

  Read the article

• loss of sound in ubuntu 12.04

  - by Leo Simon

  I'm running Linux E6520 3.2.0-56-generic #86-Ubuntu SMP Wed Oct 23 09:20:45 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux on a Dell Latitude E6530. (This is a new machine; have run the same version of linux on an older machine for a year, without this happening.) I've been losing sound regularly, though have not been able to isolate the trigger for this. I've scoured the web on this subject, in particular https://help.ubuntu.com/community/SoundTroubleshootingProcedure and Audio stopped working suddenly in 12.04 Nothing from the first site seemed to work for me. From the second site, I learned enough to be able to fix the problem when it happens, but nothing on the web has helped me figure out why the problem is happening in the first place. Patching together stuff from the web, and with some blind luck, I've found that the following steps seem to restore sound pulseaudio --kill pulseaudio --start pavucontrol -> output devices Click on the "Mute audio" icon, which mutes audio Click on the "Mute audio" icon, which unmutes audio. This obviously doesn't make sense: audio wasn't muted in the first place, but somehow, magically, toggling mute audio off and on seems to reset something. Can anybody suggest from this information why sound would be disappearing in the first place (it seems as though something is getting muted at the system level, but I don't know what)? a simpler (command-line/script) way of restoring sound, in particular, is it possible to reset pavucontrol from the commandline? Some other pieces of information that may be of use: The problem is clearly happening at the system level, since I've set up a clean new user, and this user has the same problems that I do. So user fixes like deleting the .pulse directory aren't (and don't) help. Sound works fine in Windows (dual-boot) so it's not a hardware problem Any help/suggestions on this would be most appreciated.

  Read the article

• How do I daemonify my daemon?

  - by jonobacon

  As part of the Ubuntu Accomplishments system I have a daemon that runs as well as a client that connects to it. The daemon is written in Python (using Twisted) and provides a dbus service and a means of processing requests from the clients. Right now the daemon is just a program I run before I run the client and it sets up the dbus service and provides an API that can be used by the clients. I want to transform this into something that can be installed and run as a system service for the user's session (e.g. starting on boot) and providing a means to start and stop it etc. The problem is, I am not sure what I need to do to properly daemonify it so it can run as this service. I wanted to ask if others can provide some guidance. Some things I need to ask: How can I treat it as a service that is run for the current user service (not a system service right now)? How do I ensure I can start, stop, and restart this session service? When packaging this, how do I ensure that it installs it as a service for the user's session and is started on login etc? In responding, if you can point me to specific examples or solutions I need to implement, that would be helpful. :-) Thanks! Jono

  Read the article

• Ubuntu 12.04 hangs on install using VMware Player on Windows 7

  - by Beauness_Round

  At my job, we're migrating to Ubuntu 12.04 from 10.10 (we skipped a generation), so everyone needs to make one or more new Virtual Machines for 12.04 on their Windows 7 workstation. The problem is, only some have had success while most encounter a hang during install. I was tasked with researching this problem and here are my findings (while somewhat inconclusive) I have tried uninstalling and reinstalling VMware Player, using versions 4.0.2, 4.0.4, and 5.0.0 but every install hangs at "retrieving file 55 of 129." Additionally I have installed before updating the VMware tools, as well as after (one can pre-download them) with every install hanging at "retrieving file 55 of 129." The file i was using for the above two is called: ubuntu-12.04-desktop-amd64.iso I have burned a disc with ubuntu-12.04.1-desktop-amd64.iso and tried to install it, and later tried ubuntu-12.04.1-desktop-i386.iso (which is not what i want but i wanted to see if it would work), but both times I get "PXE-E53: No boot filename recieved PXE-M0F: Exiting Intel PXE ROM. Operating System not found" This is all in VMware and the goal is to find a settings recipe that will allow an unbroken 64bit Ubuntu 12.04 install from an .iso hosted on the Windows OS. Thank you in advance to anyone with ideas!

  Read the article

• Will the Driver Support for Intel HD Graphics be Improved in 12.10?

  - by Hiranya

  I recently installed Ubuntu 12.04 on a HP Pavilion dv4 laptop. This is a core i7 machine with Intel HD graphics and also a separate nVidia VGA card. I had a lot of issues getting Ubuntu 12.04 working on this system. First there were issues booting up the live CD for installation. I worked around that by using the 'nomodeset' option. Then I continued to have similar issues after installation has completed. So I had to permanently add the nomodeset option to my GRUB boot configuration. At the moment I have a working installation but there are many issues: Ubuntu GUI is a bit flaky at times. The mouse pointer goes on and off when hovering over certain icons. Certain things doesn't get rendered properly on the screen. I can't access any of the tty consoles. Hitting Ctrl+Alt+F[1-6] gives me a blank screen. And once that happens I can't even come back to the UI by hitting Ctrl+Alt+F7. I've realized that tty consoles are actually working. I just can't see the text. If I enter a command like 'sudo reboot' into the empty screen the machine reboots. Can't get external displays (monitors, projectors etc) working. But I think this is probably because the VGA out is wired to the nVidia card which is not being used by Linux. colord program crashes every now and then triggering a popup message. So my main question is, will the support for Intel HD graphics be improved in the next release? Or will I have to keep using the nomodeset option in the new release too? Also I appreciate if anybody can shed some light on any of the issues listed above. Thanks in advance.

  Read the article

• Unity is broken after upgrading to 12.10 (Optimus laptop)

  - by SyS

  I upgraded to GNU/Linux Ubuntu 12.10 but have been unable to use Unity properly afterwards. Indeed, I encountered the exact same problem as a lot of people: the Unity side and top bars are not displaying, although in my case, Unity seems completely broken, as I can't even right-click. However, in my case, it's worth noticing that I have an Optimus laptop with a Nvidia graphics card (GeForce GT 540M). Bumblebee and its 'optirun' command is working just fine, as usual, after the upgrade. I tried several things, as resetting Compiz and Unity (with the command 'setside unity') -- which works but I have to do it everytime I boot and it resets all my settings -- updating/reinstalling/reconfiguring my Nvidia drivers as well as bumblebee, trying with Nouveau drivers instead of nvidia-current, check if linux-headers-generic were installed (they were). However, I couldn't reset xorg.conf files as they're just not there. There is neither xorg.conf file, nor its backup in /etc/X11. I think this is where the problem comes from, although I'm far from an expert. Maybe retrieving a xorg.conf file will fix this mess, but I have no idea how to do that. I'm just tired and don't know what to do. So, here I am, begging for your help.

  Read the article

• PC shuts down when installing ubuntu?

  - by Robin002

  I'm now using ubuntu from USB, and I'd like to install ubuntu on my hard disk. I tried the option of removing Vista while installing ubuntu. However, near the end of the installation process (presumably the end because I can see some slideshows on how to start using ubuntu), the screen suddenly goes to black with white words running around on it. Soon the computer shuts down. After that, restarting leads to a black screen with only a small white cursor on the top left corner. The cursor keeps blinking and nothing happens. I found that I can alternatively choose to boot with USB by hitting F12 just when the computer starts. So I tried to reinstall ubuntu by running ubuntu on USB. One of the options of installation is to update ubuntu 11.04 to ubuntu 11.04, so it seems the ubuntu is already installed somehow. Anyways, I tried both update and delete and install option but the same thing happens as the 1st time (sometimes before reaching the end), while I still cannot start my PC as ubuntu (without USB). How may I install ubuntu properly?

  Read the article

• How can I install from a 9.04 live USB/DVD?

  - by bstpierre

  I have a 9.04 (Jaunty) ISO burned to a USB stick; it appears to be a "live DVD". When I boot from it, I get a GRUB menu listing: Ubuntu, with Linux 2.6.35-generic (This matches the system currently installed on the HDD?) Ubuntu, with Linux 2.6.35-generic (recovery mode) Memory test Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1) Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode) (on /dev/sda1) Ubuntu 9.04, memtest86+ (on /dev/sda1) When I select Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1), I arrive at the desktop of a 9.04 system. I want to wipe the HDD clean and install 9.04. (Upgrading to something newer is not an option; this version is required by a legacy application.) How can I install from this live USB image? I vaguely remember some incantation that I should be able to use in the booted system, but my google-fu is broken at the moment. I'm comfortable with low-level commands, so if you want to recommend a more hard-core strategy, I'm willing to roll with it without requiring a ton of detail...

  Read the article

• Laptop, unable to install discrete graphics card GTX 880M

  - by FoxyShadoww

  So I've bought the GT70 2PE Dominator Pro a few weeks ago and I installed Zorin OS 9 Ultimate on it. Today I tried to install the Nvidia drivers on my laptop since it has the GTX 880M, but my system became unbootable. Can anyone help me with this issue? I will write down what I've tried so far. This is what I've tried so far: Downloaded the newest Nvidia drivers from their website. Pressed CTRL+ALT+F2 to open the terminal page thingy. Logged in and got root access. Stopped the lightdm service. Ran the NVIDIA-Linux-x86_64-340.32.run installer. Pressed the accept button and right after that it told me the following message: The distribution-provided pre-install script failed! Continue installation anyway?. When I install anyway, it will crash my system and makes it unbootable, Does anyone know how to use my GTX 880M? Do I need to enable it on boot time somehow? Thanks for the support, Sapphire ~

  Read the article

• error/message: the disk drive for /home is not ready... when connecting an external hard drive

  - by seallussus

  i am running Ubuntu 10.04 all updated installed to date (3/28/2012) and when i connect another sata HD i get this message the disk drive for /home is not ready yet or not present continue to wait, or press S to skip mounting or M for manual recovery so i press S but i get this message could not update ICEauthority file /home/username/.ICEauthority And when a press close i get this there is a problem with the configuration server (/usr/libconf2-4/gconf-sanity-check-2 exited with status 256) And when a press close i get message Nautilus could not create the following required folders :/home/username/desktop,/home/username/.Nautilus before running Nautilus, please create these folders or set permissons such that Nautilus can reach them And finally when a press Ok at the last message it disappears and i get a blank screen with a lot of colors on it and with nothing else so i shutdown (power button ) and disconnect the HD and boot without problems so how to fix this in simple commands because i am a total Linux noob notes -In the original error my username was in place of username i wrote (did not want to confuse anybody ) -I tried searching for this problem but a got a lot of different answers and most of them were really complicated to me and not working -I got a data HD connected and working without problems also the HD i installed Ubuntu on is Sata (maybe it helps) -Apologize for me bad English its not my mother language

  Read the article

• Tool to know what is making the desktop load longer than usual

  - by Marky

  Is there such a tool? My desktop as of late is taking longer to load than usual. I'd say it takes more than 20 seconds from GDM login until I see the desktop. Aside from disabling all app-indicators and testing it manually one by one, what else should be done? The only indicator I remember activating lately was bluetooth and I have already disabled it from Startup Applications. No improvement. I know of bootchart, but I don't really have a problem with boot. It is only after I login that the issue occurs. I'm on Natty Narwhal. *Updating this thread.... The issue seems to have fixed itself and I did not even do anything. It is really weird. I guess this is how Gnome works (and talk about not recognizing your theme and reverting to Windows 95-like look. How about that?). I have been a long time KDE user and I never encountered issues like this one. The KDE then may have booted into the desktop longer (from KDM) but at least I know it was consistent.

  Read the article

• 45 Different Services, Sites, and Apps to Help You Read Your Favorite Sites (Like How-To Geek)

  - by Eric Z Goodnight

  Ever wonder how geeks stay connected with their favorite blogs and writers? Read on to learn about RSS feeds and how easy they are to use with these 45 apps, services, and websites that can help you stay current. Note: of course, our more geeky readers are going to understand a lot of this already, which is why we included 45 great services that you might not have heard about before. Keep reading for more, or give you advice to the newbies in the comments Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 Lord of the Rings Movie Parody Double Feature [Video] Turn a Webpage into an Asteroids-Styled Shooting Game in Opera Dolphin Browser Mini Leaves Beta; Sports New GUI, Easy Bookmarking, and More Updated Google Goggles Scans Faster; Solves Sudoku Puzzles Snowy Castle Retreat in the Mountains Wallpaper Fix TV Show Sorting Issues on iOS Devices

  Read the article

• Kubuntu never gets to the login screen

  - by searchfgold6789

  I am not sure if Xorg is using the right device... The system in question is an A4-1400 CPU with built-in Radeon Graphics. I added a PCIe Radeon HD 5750, and changed the BIOS so it would use that card automatically. Now it appears that I can see output from the TV plugged into the HDMI port, and boot into recovery mode, but cannot get to a desktop - X doesn't start. It just freezes at the Kubuntu splash screen. I have no idea how to get X to use the proper graphics card. I pasted the Xorg.log to http://paste.ubuntu.com/6261137/. And the Xorg.conf generated by aticonfig --initial is at http://paste.ubuntu.com/6261161/ Also, see lspci and lshw -c display outputs. I can provide more information, but something does tell me X is not using the right graphics card and I've no idea where to begin how to fix it... I faced a similar issue before with another distribution but found no information anywhere on how to make X use a specific graphics card. Or maybe it's not that simple.

  Read the article

• Broadcom 4313 doesn't work following 12.04 upgrade

  - by Lucas

  I have an hp G62-228Ca laptop with a BCM4313 previously running Ubuntu 11.10. I ran the 12.04 upgrade last night without much thought. Following the upgrade and mandatory reboot, the wireless card no longer shows up in the network manager, the first time I've had any kind of issues with wireless under Ubuntu. I've done much Googling on the issue but so far I haven't found a permanent solution. Mucking around with some packages though (I've installed five different ones or so), I've managed to devise a workaround that I must run every time I boot the laptop. I have to remove the Broadcom STA driver and reinstall it. Inspiration taken from here: WiFi does not work, Broadcom STA Wireless driver does not work on a BCM4313 After the second modprobe command, the wireless reappears in the network manager and ten seconds after that I'm back on the wifi. If anyone can provide some advice on how to fix this permanently I will be extremely grateful. I'd rather not roll back to 11.10 or reinstall, but I will if I need to. Just let me know if you need the output from any terminal commands. Thanks in advance!

  Read the article

• Is text-only mode a saving or a problem for battery savings?

  - by Robottinosino

  A friend is flying to the US from Europe and asked me a very thought-provoking question, which I am not remotely able to answer with substance so I am asking it here: How to absolutely maximise battery life on an Ubuntu (laptop) install? do not rush to mark this as duplicate, there is an important point here: does -GNOME- help or worsen battery life? Let me provide some context: The only task he needs to perform is: edit text files in Vim. He is unsure whether running GNOME will drain his battery life more or actually save him some battery life given the smarts of GNOME's power management features like "switch this peripheral to -power save- after X minutes..." (GNOME might just be a configuration front-end for settings that are governed by command-line utils for all I know?) He could perfectly well boot the system in text-only mode and use the automatic 6 virtual consoles for his needs, if that's a saving at all over running tmux (I think so because of all the smart buffering/history/etc the latter does by default?) Exactly how would you advise him to run his laptop during his flight? What I told him already: power off WiFi in the BIOS, not from the "GUI" power off Bluetooth switch off the courtesy light and use low monitor brightness play music off of his phone, not mp3blaster do not use his tiny portable mouse (and do not attach any other USB gimmicks like "screen light", etc) stop development services he will not be using, especially apache2, tomcat, dovecot, postgresql, etc. Potentially: - switch off his cron jobs? (he does an rsync + tar + 7za of his "work in progress" every so often) I think the above is standard stuff one could get off StackExchange, and with many duplicates... the core of this question is, I think: __ will running Ubuntu in text-only mode be a saving in terms of battery life or a problem? why? (provide some technical arguments) __ I think it will be a saving but I am also scared about "other things" detecting and enabling advanced chipset power management features only when some services are started.. and fear these "services" may be off in text-only mode?

  Read the article

• On installing nvidia drivers on 12.10 I get "Bad return status for module build on kernel: 3.5.0-19-generic (x86_64)"

  - by james

  New Ubuntu user - just recently made the mistake of trying a different nvidia driver. I'd managed to get the last (nvidia-current) one working through software sources a few weeks ago. The other day I tried to cross over to nvidia-experimental-310 and this produced a system error. Swapping back and forth between proprietary drivers now always causes an error and I can't get any of them to work. Installing through the terminal I get this error message every time: Building initial module for 3.5.0-19-generic Error! Bad return status for module build on kernel: 3.5.0-19-generic (x86_64) Consult /var/lib/dkms/nvidia-experimental-310/310.14/build/make.log for more information On rebooting, I end up with the crappy screen resolution and the thick black border around the screen. I use gksudo software-properties-gtk to bring up sources, where I can change back to the nouveau driver, which restores my screen. After that I can't find /var/lib/dkms/nvidia-experimental-310/310.14/build/make.log so I can't tell you what's inside. Any ideas what might be preventing the nvidia driver from installing? SOLUTION FOUND Okay - so I have a workaround. This is what has worked: Upgrade to kernel 3.7.0 as detailed here upgrade to latest version of the nvidia drivers as detailed here No idea what was happening with kernel 3.5.0-19, but this seems to be better. A little slower maybe on boot, but after days of messing around it's nice to have something that works.

  Read the article

• 11.10 system crashes for no apparent reason [closed]

  - by varanoid

  I'm relatively new to Linux, and while I know a fair amount about computers and programming, it certainly isn't my specialty. I have a dual boot with Windows 7, and it has been working very well for me until recently. Just randomly the computer will freeze. The last time I was smart enough to keep the System Monitor open when it happened, and it looks like at the time of freezing "bash" and a bunch of other processes that I don't recognize seem to have flooded the memory. So it looks like my memory is getting overloaded and this is what is crashing the system, but I honestly have no idea what could be doing it. Generally I have a bunch of programs running, but they don't take much RAM or CPU: Transmission, Libre Office Writer, Firefox, Empathy, and Banshee. Sometimes I also have Text Editor and Terminal open, but it crashes regardless. When it crashes, it seems that all of the programs are working fine but things like windows, the taskbar, and operations like Alt+Tab just stop working properly or at all. Sometimes the mouse and keyboard freeze and I have to power off manually. Other than that I don't know what the problem is. The only irregularity I've experienced is that I can't download "Debian package management system" even though other updates download fine.

  Read the article

• My home partition slowly fills up until the system is unable to complete even simple tasks

  - by user973810

  So I have an awesome configuration on my home pc. My /home directory has its own partition. My home partition slowly fills up until the system is unable to complete even simple tasks. For example, when this issue has occured, I can load up firefox. It just pops up an error message saying that it cannot be done. Rebooting solves the issue. The strange thing is, I've run baobab and it doesn't notice a problem. There should be hundreds of gigabytes of data somewhere, but it doesn't see it. Does anyone have any idea of how I might troubleshoot this issue? I'm thinking I could do lsof but I've always found the output of that to be too much information. Maybe my drive is, like, dying. Edit: is there a /home analog of /var that gets cleared out at boot time? Maybe I could check in there next time I notice this problem to see if I can divine what's up. Update: I found the issue. my .xsession-errors file is filling up with Authentication deferred - ignoring client message Is there a way I can see what is causing this error and fix it?

  Read the article

< Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >