Search Results

Search found 19224 results on 769 pages for 'neural network tuning'.

Page 328/769 | < Previous Page | 324 325 326 327 328 329 330 331 332 333 334 335  | Next Page >

• Need help with DNS. Registrar is NS, Web Site at WinHost, Email at eHost

  - by Leon

  Need help moving a web site for a client, which I will call ClientABC. The web site is ClientABC.com, which is hosted at Rackspace, with their email hosted at eHost. We are transferring the site from Rackspace to WinHost and are keeping the email hosted at eHost. I would like the transfer to happen with little to no down time for the web site and email (email is most important). Current Config: Client owns domain and registrar is Network Solutions Domain name is managed by VendorX at Rackspace Web site is hosted on Rackspace servers Email is hosted at eHost Post-Move Config: Web site is hosted at WinHost Keep Email at eHost Here is my plan for the transfer: Copy the site files to WinHost and test to assure site is fully functional Set up the MX record in the WinHost account to point to eHost servers Change the DNS in Network Solutions from Rackspace to Winhost Questions: Will this work? What am I missing? Should I expect down time or any issues with email? I understand that there will be a period of time that traffic to the site is handled at both Rackspace and Winhost and that email traffic will be routed through both hosts as well. Will this cause issues? How will I know when the change is fully propagated and that Rackspace is out of the equation and WinHost is handling everything (so I can kill the Rackspace account) Thanks in advance!

  Read the article

• Bridging VirtualBox over OpenVPN TAP adapter on Windows

  - by Sean Edwards

  I'm trying to configure a virtual machine (VirtualBox guest running Backtrack 4) with a bridged adapter over a VPN connection. The VPN is is hosted by the cybersecurity club at my university, and connects to a sandboxed LAN designed for penetration testing against various servers that the club has built. My host (Windows 7 Ultimate) connects to the VPN fine and is assigned an IP through DHCP, but for some reason the VM can't do the same thing, and I'm not sure why. It's like OpenVPN is filtering out packets from the MAC address it doesn't recognize. I want the virtual machine to bridge over the VPN connection, because our IT office has very strict policies about what you can and can't do on the network. I want to be able to run active attacks (ARP spoofing, nmap, Nessus scans) in the sandbox environment without risking the traffic accidentally going over the university network and getting my internet access revoked. Bridging over the VPN connection and running all attacks from inside the VM would solve that problem. Any idea why the host can use this interface, but the VM can't?

  Read the article

• Looking for Inneroffice Access Tool, Workstation to Workstation

  - by nicorellius

  This may be a simple question to answer, and I apologize if it's a duplicate. I looked through the suggestions and nothing jumped out at me as the right answer, so here goes: My office has several workstations, Macs and Windows boxes. We do have a firewall and a VPN solution, so getting in to the network from outside is easy. Likewise, we use GoToMeeting for demos and when we help our customers with their issues. But we have one workstation that has certain testing tools on it, and instead of walking across the office to this machine, I'd like to access it from my desk (and monitor it). I will need to open a command line and run commands. I could start a GoToMeeting and do it this way, but that seems overkill and clunky. Is there a simpler tool that allows pseudo-remote access within the same office/network for this kind of access?

  Read the article

• How can I track down what part of pfsense is blocking website access?

  - by Chase Florell

  I've got a PFSense firewall/gateway on our network. Everything works great except for the fact that I cannot access one specific website. Pfsense is running the following packages Country Block LightSquid nmap notes squid squidGuard Strikeback I can access every single website I've ever tried aside from one that we need for business use (http://bridalnetwork.ca) here's the traceroute frodo:~ chase$ traceroute bridalnetwork.ca traceroute to bridalnetwork.ca (192.197.103.73), 64 hops max, 52 byte packets 1 rohan (192.168.5.1) 6.618 ms 1.662 ms 9.207 ms 2 * * * 3 * * rohan (192.168.5.1) 7.225 ms !H 4 rohan (192.168.5.1) 5.314 ms !H 5.701 ms !H 7.573 ms !H frodo:~ chase$ How can I figure out what the reason behind the blockage is? note: this has been tested on every computer on the network with the same results. ps: the pfsense box is 'rohan' (192.168.5.1) Here's what I get with Squid enabled and here's what I get with Squid disabled

  Read the article

• High CPU usage compared to WinXP. Common aps and actions use 100% CPU cycles

  - by Jopower

  I'm running Lubunto 14.04.1 LTS. PC is a 2004 HP ze4200 laptop: 1.8 ghz Celeron M with 1 gb RAM and 80 gb drive. Was running fine on WinXP SP3 and I cleaned the drive off to test Lubuntu 14 LTS. No anti-virus is installed yet. I enabled the CPU resource monitor to see how various programs drag the OS. Using Firefox 31 online right now, I see doing basic functions like openning a new tab and scrolling down a page are using 100% CPU time, ocassionally for 10-30 seconds. In fact some pretty basic aps like Leafnote hit 100% for a second. Wordpad never did that. Lubuntu Software Center locks things up at 100% for 10 seconds. Just typing here shows a 60-80% spike every character. Running the mouse around the screen for 10 seconds results in a sustained 100% load during that time. Right now, if I let the PC rest just idling Firefox and not doing anything with it, CPU use bounces from 20-40% all by itself. WinXP idles at 2-10% and it's considered not good for it to be above 20%... something odd must be happening. Sure, XP will give similar higher CPU cycles with program use, but it's not locking and slogging like this. Lubuntu is supposed to be a light OS and by memory usage it is and I'm happy since this is an old PC maxed for memory upgrades. However, being used to doing some tuning and wary of abnormalities going on in the background, the CPU use indicates things going on that I want to know about and perhaps apply a tweek or two. Recommendations are appreciated. And this 300 point "new tags" restriction bites!

  Read the article

• BUILD 2013 Session&ndash;Testing Your C# Base Windows Store Apps

  - by Tim Murphy

  Originally posted on: http://geekswithblogs.net/tmurphy/archive/2013/06/27/build-2013-sessionndashtesting-your-c-base-windows-store-apps.aspx Testing an application is not what most people consider fun and the number of situation that need to be tested seems to grow exponentially when building mobile apps.  That is why I found the topic of this session interesting.  When I found out that the speaker, Francis Cheung, was from the Patterns and Practices group I knew I was in the right place.  I have admired that team since I first met Ron Jacobs around 2001.  So what did Francis have to offer? He started off in a rather confusing who’s on first fashion.  It seems that one of his tester was originally supposed to give the talk, but then it was decided that it would be better to have someone who does development present a testing topic.  This didn’t hinder the content of the talk in the least.  He broke the process down in a logical manner that would be straight forward to understand if not implement. Francis hit the main areas we usually think of such as tombstoning, network connectivity and asynchronous code, but he approached them with tools they we may not have thought of until now.  He relied heavily on Fiddler to intercept and change the behavior of network requests. Then there are the areas you might not normal think to check.  This includes localization, accessibility and updating client code to a new version.  These are important aspects of your app that can severely impact how customers feel about your app.  Take the time to view this session and get a new appreciation for testing and where it fits in your development lifecycle. del.icio.us Tags: BUILD 2013,Testing,C#,Windows Store Apps,Fiddler

  Read the article

• Using airport extreme base station as a wireless G to wireless N bridge

  - by micmcg

  Due to unfortunate placement of various wall outlets in my new apartment, my adsl 2 modem + router is not able to be placed next to my airport extreme base station (AEBS). I'd prefer not to run cat5 cable between them, but I still want to use the wireless N on the AEBS, because it will have a high speed NAS plugged in via gigabit ethernet so I want to maximise the wireless transfer speed to my 27" iMac. Is it possible to use one of the radios in the airport extreme to bridge the wireless G network with the router, and the wireless N radio to broadcast normally? The only traffic going over the G network should be internet (24mbps ADSL2) so it should never get saturated. Thanks

  Read the article

• How to create Isolated test environment

  - by Safin09

  Hi All, I am very new to the VMware world. We have VMWare vCenter 4 in the production environment but we have created multiple VLAN through Cisco Switch. I want know, how I can create an isolated test environment for software testing purpose only, so anything will happen in that test vLan will not make trouble in the production environment. "Host-only networking" is the solution or there is a better way to achieve this result? My requirements A. Hosts should be able to access Internet and a Network Share drive but not Production network B. Hosts should connect each other inside the Virtual LAN C. I should be able to take automatic or periodic backup or snapshoot and deploy snapshot when necessary. Whatever your answer is, please give me steps, how to do, if possible. If I need to purchase anything, I am ready to do but I don't want to spend big money. Many thanks in advance.

  Read the article

• Windows 2008 and Truecrypt: can't access shared folder called "media"

  - by Sajee

  On my Windows 2008 system, I've attached an external USB drive that's encrypted using Truecrypt. Once I mounted the Truecrypt drive, I share some of the directories from that drive using Windows file sharing. I tried sharing a folder called "media" and when I try to access that folder from a Vista client on my LAN via \myserver\media, I get this error: \myserver\media is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. An unexpected network error occurred. If I share the folder media under some name such as fizzbuzz then I can access \myserver\fizzbuzz w/o any errors. Any clues as to why this is happening? Related: http://serverfault.com/questions/27684/windows-2008-and-truecrypt-how-to-automatically-mount-shared-folders-after-rest

  Read the article

• ADF Mobile Client is now Generally Available!

  - by joe.huang

  ADF Mobile Client is now generally available!  The press release went out this morning, and the ADF Mobile Client extensions can now be downloaded in the JDeveloper Update Center.  There is also a new Oracle Mobile Computing Strategy White Paper and Data Sheet available, for a high level overview of ADF Mobile. To get started with ADF Mobile Client development, please leverage the following resources: Oracle Technology Network ADF Mobile Landing Page: Review this page for all available resources for ADF Mobile development. Getting Start with ADF Mobile Client Demo: Short demo of the end-to-end development process. Tutorial for Mobile Application Development using ADF Mobile Client ADF Mobile Client Developer Guide ADF Mobile Client Samples: available in the JDeveloper Extension itself.  Located in <JDeveloper Install Location>/jdev/extensions/oracle.adfnmc.core/Samples directory.  Blogs will follow, describing each of the sample applications in more detail. Oracle Database Mobile Server: If database synchronization is needed, please follow this link to download/install Mobile Server. Leverage JDeveloper Forum for any ADF Mobile related questions. You will need the latest (11g Patch Set 3, or 11.1.1.4.0) version of JDeveloper to use this extension.  To download the ADF Mobile Client extension in JDeveloper, you would go to Help Menu, select “Check For Update”, and look for ADF Mobile Client extension in the Official Oracle Extensions and Updates center.  You can also directly download the extension from Oracle Technology Network. Check it out!  For any issues with accessing any of the links above, please contact me directly. Thanks, Joe Huang ([email protected])

  Read the article

• Go Big or Go Home

  - by Justin Kestelyn

  The Oracle Develop conference (#oracledevelop10), being co-located for the first time ever with JavaOne in San Francisco, is guaranteed to be the ultimate rush for developers this year. Where else can you go to learn about, interact with, and meet fellow devotees of the entire Oracle Development stack (welcome, Oracle Solaris)? This will also be the first time that the community space traditionally located at Oracle OpenWorld - and hosted by Oracle Technology Network, as always - will be present at the "developer" conference during this busy week. So, Oracle OpenWorld's loss is Oracle Develop's gain. And what a community space it will be: nearly 4,000 square feet for meeting space, contests and give-aways, consumption of various beverages, special speakers (Oracle ACEs among them, no doubt), and video-casting. The entire Oracle Technology Network crew will be on hand to "facilitate" your experience, of course. Even better, you can rub shoulders and share war stories with attendees from that "other" conference, JavaOne. (You have access to both conferences as a single package, so you may be having a conversation with yourself.) We call the whole enchilada "The Zone". As time goes on, we'll bring you more news about the activities described above, as well as OTN Night (which proves to be more raucous than ever), technical sessions and keynotes not to be missed, the unconference/open sessions, things to do at night, and more. In the meantime, stay in touch with us via Twitter or Oracle Mix.

  Read the article

• Port forwarding problem

  - by Steve

  I have a modem connecting to ADSL2 network and a router connecting to the modem. The rest of the machines all connect to the router. The modem has IP as 192.168.1.1 and the router's IP is 192.168.0.1. From the modem configuration, I can see that the modem thinks the router's IP is 192.168.1.2. I can visit the router by either using 192.168.0.1 or 192.168.1.2. Now I forward a port from the router to a private machine. It works. I can test it by typing 192.168.1.2 and it is redirected to the private machine. But if I use 192.168.0.1, it is still the router's configuration page. I also do a port forwarding on my modem. Since the modem sees only the router, I can only forward the port to the router's specific port. And I am thinking that by doing this, I can reach the private machine after two times port forwarding, once on the modem and once on the router. I also have a static public IP. I want to achieve the goal that when someone types the public IP, he will be redirected to the private machine. But when I use some online port forwarding tester, the result always says that the port is closed on the public IP. I have the questions: Why my router has two IPs? Why using one IP I can see the port forwarding result while using the other I cannot? I think the port forwarding only works when visiting from outside, rather than from both outside and inside. Otherwise, if I set port forwarding on my router/modem on port 80, I will never be able to see its original configuration page again. Everything is forwarded. Am I right? How can I achieve my goal described above? By achieve this, I will have a dedicated server of my own and the users can visit from the public IP. Anyone can correct me on any mistakes I made? I am using Netconn modem and D-Link DIR-300 router. Thank you very much for any help. Edit: Consider I have correctly setup the whole thing. Now I want to test my website by using public IP to visit it, but the port forwarding doesn't work. Does it consider that I am inside the local network and not using the port forwarding? If so, how can I do it? I ask my friends (outside my local network) to have a try and they can see the website. What should I do so that from the inside, I can do the testing? Thank you very much.

  Read the article

• How can I prevent OpenVPN from clobbering local route?

  - by ataylor

  I have a local network on 192.168.1.0 with netmask 255.255.255.0. When I connect to a VPN though OpenVPN (as a client), it pushes a route for 192.168.1.0 that clobbers the existing one, making my local network inaccessible. I don't to access anything on 192.168.1.0 on the remote machine; I'd like to just ignore it, while accepting the other routes that are pushed. My client is Ubuntu 10.10. How can I skip the one offending route?

  Read the article

• Port binding conflicts with "switch user" on Windows 7

  - by C-dizzle

  We are using the switch user function within Windows 7 under an active directory network. We have one application in particular that gives us an error: Only one usage of each socket address (protocol/network address/port) is normally permitted. bind Port 10001 Are there any other ports that can only be used at one time that might have an adverse effect on the other user? We try to mentor our users to use the log off function instead of switch user, but that doesn't always happen. As an alternative, is it possible to disable the 'switch user' button on our machines?

  Read the article

• RDP and New Accounts

  - by leeand00

  I created a new user account on the domain and added them to the Remote Desktop Users group. I could login just fine locally, but when I logged in remotely I was basically told that I could not login from there using that user. I could login just fine as the administrator or anybody else other than that new account. So I researched it a bit more and found that my setting looked like this on the local machine: So I changed it to Allow connections only from computers running Remote Desktop with Network Level Authentication (NLA). Now when I tried this down at my office I connected with RDP just fine on another computer. But low and behold when I got home and simply try to connect to the machine, I get the message: There has to be some kind of in between setting, or additional setting that I need to change on the user that allows me to connect directly via remote desktop over the VPN. At the moment I can connect by connecting to another computer on the network and then RDPing from there into my machine, but this is not ideal.

  Read the article

• Amazon EC2 Creating Tunnel with OpenVPN

  - by nocode

  I have followed these instructions: http://aws.amazon.com/articles/0639686206802544 I can ping the VPN endpoints and I have the corresponding VPC CIDR pointing to the EC2 instance in the route table. Here is my config: port 1194 proto udp dev tun # Remote peer and network remote Elastic_IP route 10.0.0.0/16 # Configure local and remote VPN endpoints ifconfig 169.254.255.1 169.254.255.2 # The pre-shared static key secret /etc/openvpn/ovpn.key keepalive 10 120 persist-key persist-tun log /var/log/openvpn.log verb 3 When I look at my logs, I get this error: RESOLVE: Cannot resolve host address: 10.0.0.0/16: Name or service not known OpenVPN ROUTE: failed to parse/resolve route for host/network: 10.0.0.0/16 in VPC1, the CIDR is 172.31.0.0/16 which is targeting the EC2 instance also running OpenVPN. I'm getting the same error from the Instance in VPC2 with the corresponding CIDR. Just for testing, i stopped the IPTABLES service I am running the Amazon linux AMI image (x64) as specified in the article I linked.

  Read the article

• ifconfig return "unknown interface: no such device"

  - by xolstice

  I'm trying to install a Linux driver for my wireless network card (D-Link DWL-G510) on my Red Hat Linux 7.1 machine with a 2.4.37.9 kernel. I downloaded the serial monkey driver from the sourceforge site and was able to successfully compile the rt73 module and load it into the kernel. The problem now is that everytime I issue the command ifconfig wlan0 up it keeps returning with the following error message: wlan0: unknown interface: No such device. I'm at a loss as to what to do here. I specifed wlan0 as the alias for the rt73 module in the modules.conf and also tried to load the driver with the command modprobe rt73 ifname=wlan0 (this specifies the interface name according to the instructions packaged in the driver), but the error message still keeps coming up. Is there something else I need to do in Linux to configure the wlan0 part or is the module not recognizing the wireless network card? It would be quite strange if it is the later since all information from the Internet is indicating this is the linux driver I should be using for mentioned wireless card.

  Read the article

• Event SRV error 2012 in Windows Server 2008 R2

  - by Natkeeran

  Error Warning "Event SRV error 2012 in Windows Server 2008 R2" is being logged with increasing frequency. NIC drivers were updated recently. There are some drops in the switches. This is the error: SRV 2012 While transmitting or receiving data, the server encountered a network error. Occassional errors are expected, but large amounts of these indicate a possible error in your network configuration. The error status code is contained within the returned data (formatted as Words) and may point you towards the problem.

  Read the article

• Public IP Routing over Private GRE tunnel

  - by Paul

  I have a GRE tunnel configured between two linux boxes. The tunnel works fine. I can ping from each host the other private ip. Head privateip: 10.0.0.1 publicip: 8.8.8.8 Tail privateip: 10.0.0.2 publicip: 7.7.7.7 The public IP on Tail has the network block 9.9.9.0/23 statically routed over the 7.7.7.7 interface. The idea is to make the 9.9.9.0/23 ips work on servers on the 8.8.8.8 network. I configure the tail host to route the /23 block. I mounted a 9.9 IP on the head server. I can ping the 9.9 ip from the tail to the head. I can't ping the 9.9 ip from the public internet. I think I need to add some other routes because of gateway issues, but I can't seem to wrap my mind around it (not a router guy, just beating my way through something that I have never done before and vaguely understand) --danks

  Read the article

• Learn How to Use Oracle’s Spatial and BI Tools for Location-aware Predictive Analytics

  - by Mandy Ho

  November 29, 2-3pm EST Are you a OBIEE (Oracle Business Intelligence Enterprise Edition) user? Have Location data you'd like to incorporate into your analysis as well? This is a great webinar for you! Join us, as Oracle experts from both teams show how to perform perdictive analytics, network analytics and spatial analysis, combined together, in real world scenarios. We will include demos evaluating airline on-time performance and retail establishment performance.  Learn how to: - Gain better business insights and improve ROI with Oracle Spatial and Graph, Oracle Advanced Analytics, and Oracle Business Intelligence Enterprise Edition (OBIEE). - Streamline and remove the complexity of building applications with OBIEE’s built-in location and analytics features. - Create the statistical model, build interactive reports and dashboards including location analysis and map visualization, and incorporate network analytics for geomarketing and site scoring. - Perform location analysis and processing such as proximity, containment, geocoding, aggregation of geographic regions, and more. Speakers include Jayant Sharma, Director, Product Management, Oracle Spatial and Mapping Technologies; Jean Ihm, Principal Product Manager, Oracle Spatial and Mapping Technologies; and Abhinav Agarwal, OBIEE Product Management. Who should attend This webinar is appropriate for CIOs, business and technical managers, developers, and analysts involved in design and management of analytic applications and solutions where spatial analysis can add insight and value to business processes. Click here, or the link below to sign up today! https://www2.gotomeeting.com/register/764677554

  Read the article

• SSIS Prehistory video

  - by jamiet

  I’m currently wasting spending my Easter bank holiday putting together my presentation SSIS Dataflow Performance Tuning for the upcoming SQL Bits conference in London and in doing so I’m researching some old material about how the dataflow actually works. Boring as it is I’ve gotten easily sidelined and have chanced upon an old video on Channel 9 entitled Euan Garden - Tour of SQL Server Team (part I). Euan is a former member of the SQL Server team and in this series of videos he walks the halls of the SQL Server building on Microsoft’s Redmond campus talking to some of the various protagonists and in this one he happens upon the SQL Server Integration Services team. The video was shot in 2004 so this is a fascinating (to me anyway) glimpse into the development of SSIS from before it was ever shipped and if you’re a geek like me you’ll really enjoy this behind-the-scenes look into how and why the product was architected. The video is also notable for the presence of the cameraman – none other than the now-rather-more-famous-than-he-was-then Robert Scoble. See it at http://channel9.msdn.com/posts/TheChannel9Team/Euan-Garden-Tour-of-SQL-Server-Team-part-I/ Enjoy! @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Nt4.0 Printer Driver not compatible with Vista?

  - by PhillC

  I've got a Brother Fax-8360P printer that has a standard printer port so it can be connected to my WindowsXP machine. I've found some drivers on the net that work and it is a pretty decent laser printer. However, when I try and connect up to it from my Vista machine over the network, it tells me that "The printer driver is not compatible with a policy enabled on your computer that blocks NT4.0 drivers". Main question - is it possible to alter this so that my Vista machine will allow me to print via the network. Secondary question - does anyone know of any generic driver that will work instead?

  Read the article

• Can't connect to Windows Server 2008 shared folders via VPN connection

  - by Pearl

  I set up an VPN connection on my 2008 server using RRAS. The VPN seems to work fine. I can connect from outside the network. I am also able to establish a remote access connection via the VPN-IP. However, I can't access my shared folders. After connecting to the VPN I can ping the server, but it is not shown in my networks. using \ip or \server-name doesn't work either, cannot be found. I checked ipconfig and this is what I found regarding the VPN: DNS-Suffix: Description: test Physical Adress: DHCP activated: No Auto-Config: Yes IPv4-Adress: 192.168.2.114 Sub: 255.255.255.255 Standard-gateway: DNS-Server: 192.168.0.1 NetBIOS: activated To clarify my IP-situation: server is connected to router with 192.168.0.x, the test-client is in an external network connected to a router with 192.168.1.x, server-client connection is using static ips with 192.168.2.x Can anyone help me with this one? The VPN should be ok since I am able to establish remote access.

  Read the article

• KVM CLI install for CentOS 6.3 defaults to Minimal Install

  - by i.h4d35

  So I now I've installed KVM (and its associated tools and packages- libvirt, VMM etc.). On the GUI (i.e using the VMM), installation works as its supposed to. However, when I try to create a VM using the command line interface, the OS (I am working with CentOS 6.3) defaults to a Minimal Install instead of giving me options to choose from at the time of installation. I am trying to install using the following command: virt-install \ --connect qemu:///system \ --virt-type kvm --name testVM2 \ --ram 512 --disk path=/var/lib/libvirt/images/testVM2.img,size=8 --vnc \ --cdrom /media/db18de8e-0853-49fb-80de-5c794d58a46f/CentOS-6.3- x86_64-bin-DVD1.iso \ --network network=default Specifying the OS-type or the OS-variant parameters doesn't make a difference. Is there something that I am missing out on or some other parameter that I must specify? Thanks in advance.

  Read the article

• Strongswan and OpenVPN together

  - by cmorgia

  I have an host in Amazon EC2 which is configured with an OpenVPN Access Server. The only client to this server is acting as a gateway from a private network. I installed StrongSWAN 5 on the same host to allow windows 7 and iOS clients to connect using IPSEC. Both services works but what I cannot figure out is how to configure StrongSWAN to consider the OpenVPN tunnel endpoint as the only gateway available to clients. Basically I want all the traffic that comes from IPSEC clients to be entirely forwarded to the OpenVPN tunnel. The remote OpenVPN client that is exposing the private network has forwarding enabled and appropriate masquerading configured. The only missing point is to have the OpenVPN tunnel as the gateway for IPsEC clients

  Read the article

< Previous Page | 324 325 326 327 328 329 330 331 332 333 334 335  | Next Page >