Search Results

Search found 15160 results on 607 pages for 'boot disk'.

Page 332/607 | < Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >

• Reusing slot numbers in Linux software RAID arrays

  - by thkala

  When a hard disk drive in one of my Linux machines failed, I took the opportunity to migrate from RAID5 to a 6-disk software RAID6 array. At the time of the migration I did not have all 6 drives - more specifically the fourth and fifth (slots 3 and 4) drives were already in use in the originating array, so I created the RAID6 array with a couple of missing devices. I now need to add those drives in those empty slots. Using mdadm --add does result in a proper RAID6 configuration, with one glitch - the new drives are placed in new slots, which results in this /proc/mdstat snippet: ... md0 : active raid6 sde1[7] sdd1[6] sda1[0] sdf1[5] sdc1[2] sdb1[1] 25185536 blocks super 1.0 level 6, 64k chunk, algorithm 2 [6/6] [UUUUUU] ... mdadm -E verifies that the actual slot numbers in the device superblocks are correct, yet the numbers shown in /proc/mdstat are still weird. I would like to fix this glitch, both to satisfy my inner perfectionist and to avoid any potential sources of future confusion in a crisis. Is there a way to specify which slot a new device should occupy in a RAID array? UPDATE: I have verified that the slot number persists in the component device superblock. For the version 1.0 superblocks that I am using that would be the dev_number field as defined in include/linux/raid/md_p.h of the Linux kernel source. I am now considering direct modification of said field to change the slot number - I don't suppose there is some standard way to manipulate the RAID superblock?

  Read the article

• Flash Backed Write Cache (FBWC) without capacitor pack

  - by Martyn

  I brought a HP Smart Array P410 controller and it is installed and working fine in a HP Prolient Microserver with 4 drives in two RAID 1 arrays. I didn’t realise however that it came without any cache so would only work by directly writing straight to the disk, and the performance was horrible. So I then brought the 512MB Flash Backed Write Cache (FBWC) memory module as I was under the impression that with FBWC I would not need a battery. I got this idea from a forum post. "What do you guys think of the choice between 'BBWC' (battery backed write cache) and 'FBWC' (flash backed write cache)? The flashed based ones use non-volitile memory so need no battery." After installing the cache module however the server pretty much won’t boot. The P410 has a flashing amber light on it, and from the manual that doesn’t sound good. I’ve managed to get to the on board BIOS once and even managed to get to boot to the HP Array Configuration Utility (ACU) CD once, but every other time the Server continuingly reboots once it get to the POST screen and reads ARRAY INITILIZING %%%. The one time I reached the ACU, it reported a problem with the Cache Module. To me, it seems like the cache module is faulty, however the supplier tells me “Do you have an FBWC battery pack, p/n 587324-001, because that is required for the cache to work. If you have it, please complete an RMA form and we'll send a replacement / credit.” Does this sound right to you? I’ve been ordering the parts from the US and I don’t want to spend $77 + $40 p&p on a battery, wait a week for the shipping to find the card is faulty, and I don’t want to send back a working card?

  Read the article

• Virtual machine lost after power cut

  - by dannymcc

  We have just had a power issue and our ESX (ESXi 4.1.0) host lost power and then rebooted. All but one of the virtual servers have rebooted with no problem, however one of them refused to power up. I try to power it on and I get the following error: File <unspecified filename> was not found Reason: The system cannot find the file specified. Cannot open the disk '/vmfs/volumes/4e03076e-90834647-b846-001185c38f42/LAMP- Stack/turnkey-lamp-11.3-lucid-x86.vmdk' or one of the snapshot disks it depends on. VMware ESX cannot find the virtual disk "/vmfs/volumes/4e03076e-90834647-b846- 001185c38f42/LAMP-Stack/turnkey-lamp-11.3-lucid-x86.vmdk". Verify the path is valid and try again. I have logged into the ESX host to see if the file is there an have found only the following file that matches the filename: /vmfs/volumes/4e03076e-90834647-b846-001185c38f42/LAMP-Stack/turnkey-lamp-11.3-l ucid-x86-s001.vmdk I notice that the above file has '-s001' after the filename. Is this recoverable? Any help of advice is greatly appreciated! EDIT: Running ls -l on the directory that contains the file shows this: drwxr-xr-t 1 root root 1680 Feb 9 09:49 4e03076e-90834647-b846-001185c38f42 The databrowser file system looks like this: and in a different directory there is the file that matches the missing one:

  Read the article

• ERROR: Not enough space?

  - by dsmoljanovic

  Now this is a very unspecific question. I'm trying to figure out what this message would mean. Here is the story behind it: I'm installing Oracle enterprise manager cloud control (12c r3) on Solaris 10 (5/09). Installer opens up, i enter all needed information and at the last step click Install. It immediately crashes with only "ERROR: Not enough space" written in log and console and nothing else. Now, this could be java error or Solaris error? I'm thinking it's happening either when it starts to copy files or when it tries to launch a process that would do that. What space is it referring to? disk (have ehough), swap (also), memory (yep)... Any ideas are helpful. Edit: i found this exception in the oraInventory logs: oracle.sysman.oii.oiic.OiicInstallAPIException: Not enough space at oracle.sysman.oii.oiic.OiicAPIInstaller.initInstallSession(OiicAPIInstaller.java:2165) at oracle.sysman.oii.oiic.OiicAPIInstaller.initOUIAPISession(OiicAPIInstaller.java:790) at oracle.sysman.install.oneclick.EMGCOUIInstaller.prepareForInstall(EMGCOUIInstaller.java:676) at oracle.sysman.install.oneclick.EMGCSummaryDlgonNext$1.run(EMGCSummaryDlgonNext.java:243) at java.lang.Thread.run(Thread.java:662) at oracle.sysman.install.oneclick.EMGCSummaryDlgonNext.actionsOnClickofNext(EMGCSummaryDlgonNext.java:1067) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at oracle.sysman.install.oneclick.EMGCUtil.performonClickOfNextForClass(EMGCUtil.java:399) at oracle.sysman.install.oneclick.EMGCUtil.performPageLevelValidationsForSilentInstall(EMGCUtil.java:367) at oracle.sysman.install.oneclick.EMGCInstaller.prepareForSilentInstall(EMGCInstaller.java:1459) at oracle.sysman.install.oneclick.EMGCInstaller.main(EMGCInstaller.java:1553) disk status: bash-3.00$ df -h /tmp Filesystem size used avail capacity Mounted on swap 8.1G 2.7G 5.4G 33% /tmp bash-3.00$ df -h /u01 Filesystem size used avail capacity Mounted on / 275G 28G 244G 11% / swap: root@gs12emcc # swap -s total: 18306040k bytes allocated + 3837808k reserved = 22143848k used, 5712664k available

  Read the article

• Will these instructions work when turning of journaling on an ext4 SSD?

  - by snowlord

  I have an Acer Aspire One with an SSD for storage. I recently installed Ubuntu on it and chose ext4 for my filesystem. Then I read that journaling on an SSD isn't the best idea, so I will try to disable journaling and I have found these intstructions (from http://fenidik.blogspot.com/2010/03/ext4-disable-journal.html): # Create ext4 fs on /dev/sda10 disk mkfs.ext4 /dev/sda10 # Enable writeback mode. This mode will typically provide the best ext4 performance. tune2fs -o journal_data_writeback /dev/sda10 # Delete has_journal option tune2fs -O ^has_journal /dev/sda10 # Required fsck e2fsck -f /dev/sda10 # Check fs options dumpe2fs /dev/sda10 |more For more performance add fstab opions: data=writeback,noatime,nodiratime i.e: /dev/sda10 /opt ext4 defaults,data=writeback,noatime,nodiratime 0 0 I will use them on my boot partition. Are there any particularly bad parts here, or are there any missing steps? Will my boot partition be fit for being on an SSD after this? Or should I consider switching to ext2, or even reinstall it all and choose ext2 at partitioning time (I'd rather not though, since I've configured quite some stuff already)?

  Read the article

• Change default profile directory per group

  - by Joel Coel

  Is it possible to force windows to create profiles for members of one active directory group in a different folder from members in another active directory group? The school here uses DeepFreeze to protect public computers. In a nutshell, DeepFreeze prevents all changes to a hard drive such that every time you restart the machine the disk is identical to it was at the time you froze it. This is a bit different than restoring to an image, in that it never really wrote changes to disk in a permanent way in the first place. This has a few advantages over images: faster recover times, and it's easy to thaw the machine for a few minutes to perform maintenance such as windows updates (which can even be automated). DeepFreeze also allows you to configure a "thawspace" partition, where changes are persistent across reboots. One of the weaknesses of DeepFreeze is that you end up needing to create a new profile every time you log in, unless your profile existed at the time the machine was frozen. And even then, any changes you make to your profile while working on a frozen machine are lost. As students have frequent legitimate needs to log in to our classroom machines, there is currently a lot of cleanup involved from time to time in removing their old profiles and changes, so I want to extend DeepFreeze to protect our classroom computers as well as public computers. The problem is that faculty have a real need to keep a stateful profile locally on these classroom computers. The solution I would like to use is to configure Windows via group policy (or even manually, if that's the way I'll have to do it) to place profile folders on the thawspace partition, but only for members of the faculty security group. Is this possible?

  Read the article

• copy large LVM volume(14TB) from one server to another

  - by bruce

  recently,I have to copy a very large LVM volume()rom server A to server B. Below is the filesystem of server A and server B - server A [root@AVDVD-Filer ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_avdvdfiler-lv_root 16T 14T 1.5T 91% / tmpfs 3.0G 0 3.0G 0% /dev/shm /dev/cciss/c0d0p1 194M 23M 162M 13% /boot /dev/mapper/vg_avdvdfiler-test 2.3T 201M 2.1T 1% /test /dev/sr0 3.3G 3.3G 0 100% /mnt server B [root@localhost ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup-LogVol00 20G 2.5G 16G 14% / tmpfs 3.0G 0 3.0G 0% /dev/shm /dev/cciss/c0d0p1 194M 23M 162M 13% /boot /dev/mapper/VolGroup00-LogVol00 16T 133M 15T 1% /xiangao/lv1 /dev/mapper/VolGroup00-LogVol01 4.7T 190M 4.5T 1% /xiangao/lv2 I want to copy LVM volume /dev/mapper/vg_avdvdfiler-lv_root on server A to LVM volume /dev/mapper/VolGroup00-LogVol00 on server B . The server A and server B is in the same IP segment. IN the LVM volume on server A , there is all average 500M avi wmv mp4 etc. I tried mount /dev/mapper/vg_avdvdfiler-lv_root on server A to server B through NFS , then use cp command copy. It is clear I faild . Because the LVM volume is too big , I do not have good idea . I hope a good solution here. I'm a chinese, my english is very pool. sorry thanks everyone!

  Read the article

• Linux kernel - can't access sda16 & sda17

  - by osgx

  I can't access sda16 sda17 and higher partitions from my linux. This linux is rather debian (very old); kernel 2.6.23. So, I know that so old linux kernel can't access 16 partitions on single sata disk. What version of kernel should I use to be able access sda16, sda17 etc? I want to update only a kernel, not a whole Linux distribution. PS. There is an WindowsNT kernel which can access and format 16, 17 or higher partition, but my intention is to use sda16 and sda17 from linux (I want Linux Kernel). PPS: dmesg: sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 > sd 2:0:0:0: [sda] Attached SCSI disk sd 4:0:0:0: [sdb] xxx 512-byte hardware sectors ... So, there is no mapping of sda16, sda17, ... to sdb. Sdb is the second physical hard drive.

  Read the article

• Unable to resize ec2 ebs root volume

  - by nathanjosiah

  I have followed many of the tutorials that pretty much all say the same thing which is basically: Stop the instance Detach the volume Create a snapshot of the volume Create a bigger volume from the snapshot Attach the new volume to the instance Start the instance back up Run resize2fs /dev/xxx However, step 7 is where the problems start happening. In any case running resize2fs always tells me that it is already xxxxx blocks big and does nothing, even with -f passed. So I start to continue with tutorials which all basically say the same thing and that is: Delete all partitons Recreate them back to what they were except with the bigger sizes Reboot the instance and run resize2fs (I have tried these steps both from the live instance and by attaching the volume to another instance and running the commands there) The main problem is that the instance won't start back up again and the system error log provided in the AWS console doesn't provide any errors. (it does however stop at the grub bootloader which to me indicates that it doesn't like the partitions(yes, the boot flag was toggled on the partition with no affect)) The other thing that happens regardless of what changes I make to the partitions is that the instance that the volume is attached to says that the partition has an invalid magic number and the super-block is corrupt. However, if I make no changes and reattach the volume, the instance runs without a problem. Can anybody shed some light on what I could be doing wrong? Edit On my new volume of 20GB with the 6GB image,df -h says: Filesystem Size Used Avail Use% Mounted on /dev/xvde1 5.8G 877M 4.7G 16% / tmpfs 836M 0 836M 0% /dev/shm And fdisk -l /dev/xvde says: Disk /dev/xvde: 21.5 GB, 21474836480 bytes 255 heads, 63 sectors/track, 2610 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x7d833f39 Device Boot Start End Blocks Id System /dev/xvde1 1 766 6144000 83 Linux Partition 1 does not end on cylinder boundary. /dev/xvde2 766 784 146432 82 Linux swap / Solaris Partition 2 does not end on cylinder boundary. Also, sudo resize2fs /dev/xvde1 says: resize2fs 1.41.12 (17-May-2010) The filesystem is already 1536000 blocks long. Nothing to do!

  Read the article

• My bios datetime is resetting to 2002, what should I do?

  - by Thierry Lam

  I bought my PC brand new in mid-2006. I'm currently dual booting Win XP 32 bits and Ubuntu Karmic Desktop. Over the last few days, when I boot up my computer, it tells me that my bios time is not set. I now have 2 choices for booting in: Windows first: I can safely get into Windows but the date now shows 2002/01/01 at 00:00. From there, Windows will not sync its time to its servers, I have to manually advance the date myself. I can also advance the date from the bios at startup. Ubuntu first: Since the time date is still set at 2002, the boot system cannot find my linux partition. I can fix that issue by booting to Windows, set the date properly and the linux issue will be fixed automatically. The above two issues can also be fixed if I manually set the bios date/time manually when I turn on my computer. It's annoying to do that every single day since I shut down my PC daily. Am I having an OS issue or a hardware issue? How can I resolve this problem?

  Read the article

• Configuring nginx to check for hard files in only a few directories,

  - by Evan Carroll

  For a node.js project I'm doing, I have a tree like this. +-- public ¦   +-- components ¦   +-- css ¦   +-- img +-- routes +-- views Essentially, I have the root to be set to public. I want all requests destined to /components/ /css/ /img/ To check to see if their appropriate destinations exist on disk. However, I don't want requests to other directories to even run an IO operation, /foo/asdf /bar /baz/index.html None of those should result in the disk being touched. I have a stansa that does the proxy to node.js, location @proxy { internal; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-NginX-Proxy true; proxy_pass http://localhost:3030; proxy_redirect off; } I just would like to know how to arrange this. My problem would be easily solved if try_files took a single argument, but it always wants a file first. location /components/ { try_files $uri, @proxy } location /css/ { try_files $uri, @proxy } location /img/ { try_files $uri, @proxy } However, there is nothing that I can find that will give me, location / { try_files @proxy } How do I get the effect I want?

  Read the article

• Master File Table Corrupt, any way to save data?

  - by domen

  hi. I've used search, but none of the results match my problem so I didn't have to ask separate question. I've Installed Windows 7 RTM recently and since then partitions located on one of my HDDs have gone "crazy". They used to "freeze" and didn't open in explorer for some time (minute or two, usually), sometimes all partitions of the drive wouldn't show until reboot and finally, one of those partitions started showing "disk structure is corrupted and unreadable" warning, it appeared in Disk Management window as RAW and chkdsk showed "mft corrupt". There were no important data on the partition and I didn't have enough time to analyze the problem at the moment, so I just reformatted it and ran antivirus scan on system. After that problem settled for some time, but yesterday the problematic HDD vanished again from the system. After reboot chkdsk identified mft of four partitions corrupt and now they are all in same conditions as the above mentioned one. But the difference is that the files stored in them are extremely important. and just for info: I upgraded from Win7 build 7077, but had some performance issues, so I reformatted system drive and installed fresh Win7 RTM on it. I've downloaded TestDisk and it shows all the partitions marked as NTFS (not RAW) and my knowledge of the program wasn't sufficient to obtain any other info from it :-) and the images that could help describe the problem (sorry, I'm not allowed to post images and more than one hyperlink): http:// img22.imageshack.us/img22/5909/chkdskz.jpg http:// img198.imageshack.us/img198/5576/computeray.jpg I'm interested, is there a way to let me restore the MFT or just access files so I can backup them before reformatting the drive. Thanks for your time. :) P.S. my reformatted drive is showing no problems, could there be a problem with windows 7 itself? I googled, but with no results.

  Read the article

• Computer keeps restarting [closed]

  - by Joris

  I have a strange problem with my desktop pc, when I start it, it just restarts immediately, it displays the bios/motherboard logo and then restarts. I can't access the bios to edit settings because it restarts to fast. Then I tried different things to fix it with mixed success. (I also tried to reset the bios without success) I noticed that a capacity from the graphics card was broken (it looked exploded) so I ordered a new graphics card & plugged it in the computer. It didn't change much, still the same problem. Then I unplugged everything that's not necessary and put only 1Gig RAM in the motherboard (usually it has 4 x 1Gig RAM) and the computer started, then I putted another gig of RAM and the computer still started. (starting=booting windows) When I putted in the 3th RAM it didn't boot anymore (again restarting all the time) so I removed this 3th gig of RAM and this is where it gets weird. I expected the computer to boot again because it is exactly the same configuration as before - which worked - but the computer didn't want to start. It just gave the same problem as before (restarting all the time.. ) Anyone an idea what might be wrong?

  Read the article

• How to start MSSQL Server with corrupt model db

  - by Jordan McGuigan

  After moving some databases around (restoring, deleting, etc) we experienced an issue creating new databases. Specifically, When trying to create a new database MSSQL Server it failed because the "The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run". As some online solutions suggested, we tried to Start and Stop the MSSQL Service. Service would not restart because "Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive" (FYI: the drive has 100gb of free space). Tried restarting the machine the MSSQL Server is running on. When the server came back online, we received the same error. We have tried deleting tempdb.mdf and restoring the modeldb from the templates folder, but neither of these solved the issue. We are unable to connect to the database, even in single user mode. Many of the online solutions have us running SQL commands against the server, but we are unable to connect (even in single user mode) to the DB to run commands against the server. Specific error messages: Database 'model' cannot be opened. It is in the middle of a restore. (Microsoft SQL Server, Error: 927) The SQL Server (MSSQLSERVER) service is starting. The SQL Server (MSSQLSERVER) service could not be started. A service specific error occurred: 1814. We need the server up and running again ASAP.

  Read the article

• The BitLocker encrypted logical drive of my laptop is not accessible. On clicking error appears,"Application not found"

  - by Nauman Khan

  I had an important personal data that was stored in my laptop drive 'F'. My 4 year old son also uses my laptop to play games. To secure my data I used bitlocker software that was already there in my windows 7 ultimate 32 bit. I am using a Dell D 630 Core2Duo laptop. The thing worked fine for me and I have been able to access my data in drive 'F' as and when I required. But today, when I tried to open my 'F' drive, an error box appeared saying "Application not found". I right clicked and checked 'properties' of 'F' drive. It showed me Used Space = 0 bytes and Free Space = 0 bytes. I opened 'Disk Management' which showed my 'F' drive file system as 'Unknown (Bitlocker Encrypted). 'Disk Management' is also showing my 'F' drive as healthy logical drive. I opened 'Manage bitlocker' and found that my 'F' drive was being shown locked and 'Unlock Drive' was displayed against it, however, when i click on 'Unlock Drive', it does not function. I opened 'TPM Administration' and found an information that 'Compatible TPM cannot be found'. My bitlocker encryption was working fine which means that I had a compatible TPM in my laptop. Where has it gone? How can I enable it? Is my 'F' Drive lost forever and thus the data in there as well?

  Read the article

• How to setup RAID 1 with Intel RST on an existing Windows 7 system?

  - by instcode

  I'd like to setup RAID-1 using Intel Rapid Storage Technology on my Windows 7 64-bit system. I have an 1TB SATA HDD with Windows 7 system installed on the first primary partition (leftmost, ~200GB). The rest of this HDD is unallocated (~800GB). I bought another 2TB SATA, then created a primary partition (leftmost, ~500GB) and filled my data in. The rest of this HDD is unallocated (~1.5TB). A quick disk layout (XXX is the unallocated region): HDD1 (1TB): [ 200GB C:\ SYSTEM | XXXXXXXXXXXX ] HDD2 (2TB): [ 500GB Z:\ PROGRAM | XXXXXXXXXXXXXXXXXXXXXX ] Now, I want to create a 500GB RAID-1 partition (I'm not sure if using "partition" is correct here) on the rightmost of the 2 HDDs above without losing any existing data from both disks. Here is the expected layout: HDD1 (1TB): [ 200GB C:\ SYSTEM | XXXXXX | 500GB D:\ DATA - RAID-1 ] HDD2 (2TB): [ 500GB Z:\ PROGRAM | XXXXXXXXXXXXXXXX | 500GB D:\ DATA RAID-1] Let's not concern about data lost, is it possible to have that final layout using Intel RST? Previously, I tried this layout using dynamic disk & software RAID from Windows and it worked as expected, however, it's quite ugly in resynching after an OS failure that I don't want. If yes, is there a way to keep the data on existing partitions untouched or, at least, it should keep the SYSTEM partition safe (I'm okay if the PROGRAM partition has to be gone.)? Well, are there any strict/special steps I should follow when using the Intel RST manager in order to achieve that? If none of those questions above are "Yes", could you please suggest some other possible layouts that leave the C:SYSTEM partition untouched?

  Read the article

• Ubuntu 10.04 on virtualbox gives error: Target filesystem doesn't have /sbin/init \ No init found. Try passing init= bootarg

  - by Philip

  I'm a linux newbie and the only reason I have it installed is so I can stop having Windows incompatibility issues with Ruby on Rails. Having said that, it sure has been nice, and much faster, and I don't think I'll be doing any Winrails stuff anytime soon. So I created a virtualmachine using virtualbox and have had ubuntu on it for the last 3 weeks. Recently ubuntu asked if it could update a few things, I clicked 'ok'. Now it won't boot and I get this error: *mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory ... Target filesystem doesn't have /sbin/init. No init found. Try passing init= bootarg BusyBox v1.13.3... (initramfs) _ * So I cruised the forums and there are a variety of solutions, but they all have to do with booting from the live cd. (which I assume is the ISO image I used to install ubuntu in the first place). But when I boot from that CD, it just hangs on the ubuntu screen, and the little dots keep cycling white to red, but it hung there for an hour so I think it was stuck. Not sure what I can do; can I do anything from the busybox shell (or whatever that is) to fix things? The thing is, it took about 10 hours to get everything the way I needed with all the gems and whatnot. And I didn't really write down what I tweaked, and I'm middle aged, so all that information has leaked out by now and I don't want to do it again. I'd really like to repair my existing install. One question you might have is, is there something wrong with the ISO? I don't think so, because I made a new virtual machine and used that same iso file to install a fresh ubuntu. Any help much appreciated. Phil

  Read the article

• How to recover my invisible HD again?

  - by pattulus

  I made this several times now, but this time something bad happened. What I did: I installed Windows 7 at a 32GB partition on my slot 2 HD in my MacPro. Windows 7 made a 105MB partition… I knew this before, but what I didn’t know was that this partition is now on my slot 4 HD. My home folder, my private videos and some other stuff are on this 1TB drive. What I found out so far: I’m currently logged in as another admin since my OS partition as well as the two other HD's aren't harmed. Disk Utility: … only shows the 105MB NTSF partition on this 1TB volume. It isn’t showing my old 1TB partition/ex-HD named "storehouse". Only the partition tab is telling me that there now is a 1TB empty free unpartitioned space. Data Rescue II: … is showing the Volume as it used to be with it's old Name "storehouse". A quick scan and a thorough scan both were done in 1 second which leds me to the conclusion that there's isn’t something deleted at all (» hope!). Data Rescue doesn’t even mention the damn "system reserved" partition. Drive Genius: … also shows the old partition and doesn’t mention the new one. But looking at the info it tells me under "content": FDisk_partition_scheme (instead of Apple_partition_scheme). Well D'oh…. Tech Tools: … doesn’t show the volume, otherwise I'd might have been tempted to press rebuild/repair. What to do next?? I think the best approach is to buy another 1TB HD and let Disk Warrior Clone my old one to it… just to be on the safe side. But what is the best thing to do after this… ???

  Read the article

• How to find what files / directories are not copied yet?

  - by user8676

  Hi all, I found the following 'nice' situation: An archive of few disks (actually three disks) which has a bunch of photos (more or less) organized. Well, this is good. A big disk shared on a network which has a bunch of photos which has another folder structure (even if is somewhat recognizable for a human being) than the archive described above, but some of the files on this big network share are the same with the files from the archive. Well, this is bad. What we need is to move the different (new) files from the network share in the archive (perhaps we'll use for this a new disk added to archive). The program that we need is different from a regular File Duplicate Finder program because usually the File Duplicate Finder finds the duplicates from all sources comparing each file with another. We want to find the differences between the two sources. It is fine for us to have a report generated in text file which after this we'll use to do our move. A Windows solution will be preferred. Any ideas? TIA

  Read the article

• FTP Server upload and filesystem questions

  - by Alex

  I'm a photographer who mainly does event photography. A while ago I bought myself a Nikon WT-4 wireless transmitter, a small device which connects via USB to my Nikon D700 DSLR, and then establishes a WiFi connection to an existing WLAN. It can then upload any pictures I take via FTP to an FTP server somewhere in the network. On my laptop I then have a piece of software which will check a given folder on the disk regularly, this software is smart enough to look at the modified file timestamp, if this timestamp is less than 10 seconds ago, it will not attempt to import the folder and skip the file in this iteration of the import scan. The problem I've discovered seems to be inherent to the FTP protocol, as I have the same problem with Windows 7 built in IIS server, as I do with FileZilla FTP server. When the transmitter starts to upload a file, the FTP server will create a small 300-500 KB file with the correct filename on the disk, but then do nothing with the file until it has completely received the file via FTP. So it seems to create this small dummy file, and then buffer the remainder of the FTP upload until it's finished, and then dump the rest of the file into the dummy file making it the correct size. Problem is, these uploads take about 15-30 seconds depending on reception, but since the folder watch tool will already try to import any file older than 10 seconds, it will always try to import the small dummy files which obviously fails as they're not copmlete yet. Is there any way to 'disable' this behaviour? Ideally I would like my file only to show up once it's been completely uploaded. Or perhaps someone knows another FTP server application (it has to run on win7) which does not show this behaviour?

  Read the article

• 150 TB and growing, but how to grow?

  - by seandavi

  My group currently has two largish storage servers, both NAS running debian linux. The first is an all-in-one 24-disk (SATA) server that is several years old. We have two hardware RAIDS set up on it with LVM over those. The second server is 64 disks divided over 4 enclosures, each a hardware RAID 6, connected via external SAS. We use XFS with LVM over that to create 100TB useable storage. All of this works pretty well, but we are outgrowing these systems. Having build two such servers and still growing, we want to build something that allows us more flexibility in terms of future growth, backup options, that behaves better under disk failure (checking the larger filesystem can take a day or more), and can stand up in a heavily concurrent environment (think small computer cluster). We do not have system administration support, so we administer all of this ourselves (we are a genomics lab). So, what we seek is a relatively low-cost, acceptable performance storage solution that will allow future growth and flexible configuration (think ZFS with different pools having different operating characteristics). We are probably outside the realm of a single NAS. We have been thinking about a combination of ZFS (on openindiana, for example) or btrfs per server with glusterfs running on top of that if we do it ourselves. What we are weighing that against is simply biting the bullet and investing in Isilon or 3Par storage solutions. Any suggestions or experiences are appreciated.

  Read the article

• How do I prevent my computer from freezing when it starts to swap?

  - by cdauth

  I work as a Java programmer, so I often have to run several programs at the same time that consume a lot of memory. When my memory is full and Linux starts swapping, my computer almost completely freezes. I can see that it is heavily writing on the hard-disk and everything reacts really slowly, often not at all. Moving the mouse in X sometimes doesn’t work at all, sometimes it has a delay of several seconds, clicking usually has a delay of several minutes. Sometimes it is possible to change to the TTY (with a long delay), there I can usually type without delay, but when I try to log in, it takes several minutes after typing in the user name until the password prompt appears, and usually an error message appears that tells me that the login timed out. So the only possibility is usually to restart the computer. I noticed that other intensive writing to the hard disk also significantly slows down my computer. Sometimes, I used rsync to limit the bandwidth when I copied files around on my own computer, as else the system would be almost unusable. How can this be? At the moment it seems more useful to me to completely turn off swapping. That might crash some processes, which is unfortunate, but the alternative at the moment is to crash all processes by turning off my computer. I am using Gentoo Linux with kernel 3.6.2-gentoo, I have a 10 GB swap partition on a HDD.

  Read the article

• How to (properly) back up a live QEMU/KVM VM?

  - by Roman

  I'm currently engineering a backup solution for KVM VM's as an additional measure to traditional backups. Unfortunately, all currently (August 2013) existing solutions I came across so far either: do not ensure a consistent backup of the VM (losing RAM state, creating a dirty image, or other things), or require lengthy downtime (complete VM shutdown while backing up). I'm aware of QEMU/libvirt's functionality of taking snapshots, however, it's not yet usable since: image-internal snapshots present you with an ever-changing image file, resulting in a likely dirty backup (assuming one uses qcow2 images at all). one cannot yet merge a currently active external snapshot into the original backing image ("blockcommit"). Out of the above reasons, I'm now implementing a script that: Saves the VM's state and halts it Sets up a devicemapper snapshot(s) where the VM's disk images and state reside Resumes the VM Mount the snapshot(s) of step 2. Backs up the VM's disk and state (configuration for convenience) Merges back the snapshot(s). If I got everything right, this will take consistent backups of VM's with only seconds (if at all, since 1-3 is fast, possibly sub-second) of downtime. Of course, when restoring, the VM will be way in the past, but at least giving me the option of an orderly shutdown/reboot. Am I missing something with this solution? Or has someone indeed already implemented this?

  Read the article

• I need a driver for my Cardbus USB 2.0 card

  - by Carl

  The picture and details of the card are here: http://www.ht-link.com/en/ProductView.asp?ID=106 The Windows drivers for this don't work right. I tried them on my previous laptop, and then installed the ones off their included CD. (Note that the systems requirements includes a CD-ROM drive...) I have a new laptop, and lost the CD. The website that lists the drivers is broken - the download links don't work. It is here: http://www.ht-link.com/en/DownView.asp?ID=10 I need the very first link - The Win XP drivers for the HT-112NEC. The company does not reply to my e-mails. I've tried searching Google for other sources for the driver (I didn't bother with those sites that want me to install driver detection software or create a log-in for their site). [Here's the problem I am getting using the drivers Windows XP SP3 installs: When I plug in my USB 2.0 hard-disk adapter, a USB Mass Storage Device entry is added in the Device Manager, but there is no entry under Disk Drives, and a drive letter is not assigned, so I can't access the driver. Like I said, this card didn't work without their special drivers on my other laptop, either.]

  Read the article

• Latitude D600 USB port problem

  - by Moab

  Both USB ports stopped communicating on my D600, they have power, my optical mouse still lights up, no device works on the ports, everything is fine in Device manager in Dual boot XP and W7. Checked the bios, not much in there for USB. No usb device shows up when I use the F12 boot device menu either, so it must be some hardware issue. I have another hard drive with Ubuntu on it, popped it in and USB does not communicate with it either. Appears to have 5v but no communication, any Ideas besides another motherboard or USB card for the pcmcia slot (these don't work to well from my research)? I mostly use them for mass storage devices and pcmcia slots don't supply enough power for these devices. Thanks to all who answer with last ditch efforts. I hate to give up on it, its been good to me and still runs rather well for its vintage. EDIT: I did inspect the ports with a flashlight and did a partial disassembly of the laptop in an attempt to check the solder joints, but would require complete motherboard removal to see them, that is where I stopped. .

  Read the article

< Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >