Search Results

Search found 15160 results on 607 pages for 'boot disk'.

Page 334/607 | < Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >

• Nvidia RAID 1 Problem. Degraded drives...

  - by Vedat Kursun

  I had a RAID 1 on my system which has a Gigabyte GA 8N SLI motherboard with a Nvidia chipset.(Nvidia Raid IDE ROM BIOS 4.84) When the system was working probably there used to be an icon on the system try which showed my two RAID disks. Bu after my friend accidentally clicked on the "Remove drive safely" icon while trying to disconnect her USB, I noticed that the RAID system wasn't working. After a reboot there was suddenly a failure message during boot screen. When I enter the Nvidia RAID setup utility (F10) I can see that both drives are degraded and that won't change even if I get into them and press R for Rebuild. Other options are only Delete and Exit. When I boot to Windows (XP Pro 32 Bit) I can see both my disks with the same data on each of them but my RAID 1 is broken. It's a relief to see that at least my RAID 1 was active but it's annoying not being able to rebuild it. Is there a way where I can rebuild my RAID 1 without having to delete the array and build it again? Cause I don't want to backup 400 Gigs of data and then recopy it to my drives... (Disks 2 x Seagate ST3500418 AS SATA Drives)

  Read the article

• Nvidia RAID 1 Problem. Degraded drives...

  - by Vedat Kursun

  I had a RAID 1 on my system which has a Gigabyte GA 8N SLI motherboard with a Nvidia chipset.(Nvidia Raid IDE ROM BIOS 4.84) When the system was working probably there used to be an icon on the system try which showed my two RAID disks. Bu after my friend accidentally clicked on the "Remove drive safely" icon while trying to disconnect her USB, I noticed that the RAID system wasn't working. After a reboot there was suddenly a failure message during boot screen. When I enter the Nvidia RAID setup utility (F10) I can see that both drives are degraded and that won't change even if I get into them and press R for Rebuild. Other options are only Delete and Exit. When I boot to Windows (XP Pro 32 Bit) I can see both my disks with the same data on each of them but my RAID 1 is broken. It's a relief to see that at least my RAID 1 was active but it's annoying not being able to rebuild it. Is there a way where I can rebuild my RAID 1 without having to delete the array and build it again? Cause I don't want to backup 400 Gigs of data and then recopy it to my drives... (Disks 2 x Seagate ST3500418 AS SATA Drives)

  Read the article

• How does one skip “Windows did not shut down successfully” in Win7-64?

  - by XenonofArcticus

  Migrating an app from an expensive and unreliable dedicated embedded x86 box running WinXP-embedded to COTS hardware (Dell E6410 laptop) running normal Win7-64. At this time, it's not feasible to deploy using Windows 7 embedded. The problem is, that the system is still sort of "embedded". The power could shut off at virtually any time without prior warning. We've stripped the OS down and removed the battery capability so that it will power down as desired. The app never writes to the disk, so it's not like we're going to corrupt anything terribly. The system is essentially idle after our app is up and running (with the exception of some computation, graphics, and TCP/IP and serial communications) so the OS enters a pretty stable state rather quickly. After a power-loss however, it rightly complains that Windows did not shut down successfully and presents the user with the Windows Error Recovery text screen. If left alone, it does eventually move on booting just fine, but we'd like to skip that step if possible. WinXP-embedded is designed to do this automatically, so I know it's possible. I've looked at the Kernel Switches but I didn't see anything documented for "Skip Windows Error Recovery". I've also read extensively on the startup process: http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/windows-nt-6-boot-process.html I know I can disable the auto chkdsk in the registry, but that's not the same thing either. So, how do I streamline the boot process to not hassle the user about a situation that will be the regular normal situation?

  Read the article

• How to correctly setup home directories and permissions on a mounted partition.

  - by user36505

  I'm setting up a Fedora 12 server. I have a root (/) partition where the boot (/boot) partition is mounted and then a separate partition (/files) for separating home directories and shares away from the other partitions. The filesystem mounts fine and users can be created to have home directories in /files/home/[user] just fine. However, when I log in as one of those users, I get an error saying "Cannot chdir in to /files/home/[user]: permission denied". If I create a user under the default /home using the same process, everything works fine. The same goes for when I try and browse a share in windows; I can see the shares, but cannot access them. The permissions and owners on /files and /files/home are the same as /home. When the user is created, the user directory owner and permissions are also the same. How can I set the /files partition up so that it can be used as a home directory and for samba sharing rather than using the root (/) partition? Thanks.

  Read the article

• Recovering a broken NTFS filesystem?

  - by OverTheRainbow

  A much-needed Windows Update broke a Vista laptop that was running fine until then: After booting up, Windows displays "Please wait..." but it never goes anywhere. I waited for a couple of hours, there is a bit of disk activity, but it didn't work out in the end. I booted with the Vista DVD, chose "Repair your computer" which said that there was nothing wrong :-/ Next, I booted it up with a Linux USB keydrive, and ran Gparted 0.8.1 (which includes ntfsresize v2011.4.12AR.4 libntfs-3g) which displays a bunch of warnings for the NTFS partition where the Vista system is located such as: ntfs_mst_post_read_fixup: magic: 0x00000000 size: 1024 usa_ofs: 0 usa_count: 65535: Invalid argument Record 16 has no FILE magic (0x0) Next, I ran ntfsfix /dev/sda2, which said: Mounting volume... OK Processing of $MFT and $MFTMirr completed successfully. NTFS volume version is 3.1. NTFS partition /dev/sda2 was processed successfully. Next, I rebooted Vista, which did a CHKDSK, before rebooting. But I'm still getting nowhere with "Please wait..." Before I copy the user's data to another host and reinstall Vista from a DVD, does someone know what I could try? Thank you. Edit: In case someone else has the same issue... After the BIOS, hit F8 and choose "Repair your computer", followed by "Toshiba HDD Recovery". In addition to a 1,5GB partition labelled "WinRE", the hard disk contains a second partition labeled "Data" from which the application will fetch a system image and reinstall it in the "Vista" partition. Make sure you copy your data out of the system partition before doing this.

  Read the article

• When using software RAID and LVM on Linux, which IO scheduler and readahead settings are honored?

  - by andrew311

  In the case of multiple layers (physical drives - md - dm - lvm), how do the schedulers, readahead settings, and other disk settings interact? Imagine you have several disks (/dev/sda - /dev/sdd) all part of a software RAID device (/dev/md0) created with mdadm. Each device (including physical disks and /dev/md0) has its own setting for IO scheduler (changed like so) and readahead (changed using blockdev). When you throw in things like dm (crypto) and LVM you add even more layers with their own settings. For example, if the physical device has a read ahead of 128 blocks and the RAID has a readahead of 64 blocks, which is honored when I do a read from /dev/md0? Does the md driver attempt a 64 block read which the physical device driver then translates to a read of 128 blocks? Or does the RAID readahead "pass-through" to the underlying device, resulting in a 64 block read? The same kind of question holds for schedulers? Do I have to worry about multiple layers of IO schedulers and how they interact, or does the /dev/md0 effectively override underlying schedulers? In my attempts to answer this question, I've dug up some interesting data on schedulers and tools which might help figure this out: Linux Disk Scheduler Benchmarking from Google blktrace - generate traces of the i/o traffic on block devices Relevant Linux kernel mailing list thread

  Read the article

• How to fix Windows 7 device removal notification loop

  - by Barry Kelly

  Bit of an odd one this. One of our PCs is getting caught in a loop some time after being turned on, usually after a USB storage device has been attached - sometimes an iPod, sometimes a GPS. Specifically, Windows Explorer starts showing a drive icon and letter (E:, as of right now) for the System partition (the small hidden one at the start of the boot drive). Then, the icon disappears. Then it reappears again. And disappears. It does this very quickly, at what looks like maybe 50 times a second. CPU usage in this loop is also very high; averages about 66%. This machine has an i7 920 CPU, which is quad core with hyperthreading; so this usage rate works out to about 5 100% busy threads, along with whatever normal idle load is (particularly Task Manager itself). Inspecting with Process Explorer shows that the device removal notification infrastructure has gone berserk. The threads in system service processes (i.e. apart from Windows Explorer) which are using all the CPU power relate to device notification. The Disk Management MMC snap-in also fails to run when the loop starts. The only way to break the loop, it seems, is to reboot the machine. Anyone seen anything similar to this, and know of a way to fix it? Machine details: Windows 7 x64, fully patched i7 920, 12GB RAM Intel SSD 80GB (X25-M, I believe; not G2) 2TB 5.2K disk for bulk storage AMD HD 5870 Further hardware details await. I'm going to go through and update all drivers I can find.

  Read the article

• Deleting old system folders from a drive that is no longer the windows installation drive

  - by grenade

  I dropped my laptop and was no longer able to boot. There were error messages about a corrupt boot record. Replacing the hard drive and reinstalling Win 7 was how I dealt with it. The old drive still appears to be good and I can read and write to it when I connect it as a second drive and mount as D:. However, if I try to recover the space being used by the windows, programdata, program files & program files(x86) folders, by deleting them I get error messages about needing permission from trustedinstaller. If I set myself as the owner of the folders and retry the delete I get error messages about needing permission from myself! Since I'm pretty sure that I have permission from myself to delete the folders, I can only assume that the OS or file system has gotten its panties twisted. I have tried shift, right click, delete from explorer and also if I run "del /f /s /q D:\Windows" from an admin command prompt, I get a succession of Access is denied messages as well. How do I delete D:\Windows, D:\ProgramData, D:\Program Files & D:\Program Files(x86) from a drive that is not the Windows installation drive?

  Read the article

• Unnamed, hidden partitions on my 500 GB HD, HP Pavilion dm4 Laptop

  - by emotionull

  I have multiple doubts here. Its a Seagate 500GB 7200RPM HD. I had installed it few months back after my original Laptop HD stopped working. The current drives on my latop, as shown by the Windows Disk Management are: After installing the new HD, I had done a complete clean install of Windows 7 and I didn't create any parition myself, manually. So there are 4 drives. Even previously, before I installed this new HD, my laptop had 4 Partitions. But the there were no un-named partitions like the two in this case. The other two were HP tools and Recovery or something. It was pre-configured, Factory installed Windows. Also, now when I right cick on the unnamed Drives from Disk Management, all the options are greyed out (see image) except the delete partition image. So how do I know what's inside those partitions? Will it be ok if I delete them? I want install Ubuntu and dual boot it with my current windows installation. I cannot do it in current setup as there are already 4 partitions of my HD and if I will try to make a new partition, it will be a logical one (correct me if I am wrong here). So can I delete the un-named, hidden partitions and use them for Ubuntu? A bit unrelated question. As a backup option, can I use the Windows 7's Backup and Restore facility to keep a complete backup of all the drivers and system softwares.

  Read the article

• MysqlTunner and query_cache_size dilemma

  - by wbad

  On a busy mysql server MySQLTuner 1.2.0 always recommends to add query_cache_size no matter how I increase the value (I tried up to 512MB). On the other hand it warns that : Increasing the query_cache size over 128M may reduce performance Here are the last results: >> MySQLTuner 1.2.0 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.5.25-1~dotdeb.0-log [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: +Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in InnoDB tables: 6G (Tables: 195) [--] Data in PERFORMANCE_SCHEMA tables: 0B (Tables: 17) [!!] Total fragmented tables: 51 -------- Security Recommendations ------------------------------------------- [OK] All database users have passwords assigned -------- Performance Metrics ------------------------------------------------- [--] Up for: 1d 19h 17m 8s (254M q [1K qps], 5M conn, TX: 139B, RX: 32B) [--] Reads / Writes: 89% / 11% [--] Total buffers: 24.2G global + 92.2M per thread (1200 max threads) [!!] Maximum possible memory usage: 132.2G (139% of installed RAM) [OK] Slow queries: 0% (2K/254M) [OK] Highest usage of available connections: 32% (391/1200) [OK] Key buffer size / total MyISAM indexes: 128.0M/92.0K [OK] Key buffer hit rate: 100.0% (8B cached / 0 reads) [OK] Query cache efficiency: 79.9% (181M cached / 226M selects) [!!] Query cache prunes per day: 1033203 [OK] Sorts requiring temporary tables: 0% (341 temp sorts / 4M sorts) [OK] Temporary tables created on disk: 14% (760K on disk / 5M total) [OK] Thread cache hit rate: 99% (676 created / 5M connections) [OK] Table cache hit rate: 22% (1K open / 8K opened) [OK] Open file limit used: 0% (49/13K) [OK] Table locks acquired immediately: 99% (64M immediate / 64M locks) [OK] InnoDB data size / buffer pool: 6.1G/19.5G -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance Reduce your overall MySQL memory footprint for system stability Increasing the query_cache size over 128M may reduce performance Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 192M) [see warning above] The server has 76GB ram and dual E5-2650. The load is usually below 2. I appreciate your hints to interpret the recommendation and optimize the database configs.

  Read the article

• What I should know about memory management?

  - by bua

  first of all: I don't use stackadmin or similar so please don't vote for moving there, I'm reading man top and paper "what every programmer should know about memory ..." I need really simple explanation like for retard ;) Having following top dump: top - 11:21:19 up 37 days, 21:16, 4 users, load average: 0.41, 0.75, 1.09 Tasks: 313 total, 5 running, 308 sleeping, 0 stopped, 0 zombie Cpu(s): 0.4%us, 0.6%sy, 0.9%ni, 96.2%id, 0.1%wa, 0.0%hi, 1.9%si, 0.0%st Mem: 132103848k total, 131916948k used, 186900k free, 54000k buffers Swap: 73400944k total, 73070884k used, 330060k free, 13931192k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3305 tudb 25 10 144m 52m 940 R 6.0 0.0 1306:09 app 3011 tudb 15 0 71528 19m 604 S 3.3 0.0 171:57.83 app 3373 tudb 25 10 209m 93m 940 S 3.0 0.1 1074:53 app 3338 tudb 25 10 144m 47m 940 R 2.7 0.0 780:48.48 app 4227 tudb 25 10 208m 99m 904 S 1.3 0.1 198:56.01 app 8506 tudb 25 10 80.7g 49g 932 S 2.0 39.6 458:31.22 app I'm wondering what is: RES (my expl. physical memory consumption ? see 49GB) VIRT (memory mapped disk to cache? see 80GB) SHR (shared pages?) Swap: (is this cached label - for memory mapped disk into swap cache?) Should sum of RES give MEM: X used? or maybe sum of VIRT?

  Read the article

• Last step in HDD Recovery (fixing windows)

  - by Atom Computing

  My dad’s hard drive corrupted which was a result of many bad sectors. Anyway, I made a clone of the drive and have now repaired it totally (recreating the MBR and MFT) and doing a series of ChkDsk's on it. I can now see all the files and folder on it and it is all intact. I currently have it as a slave in my computer (where I was doing all the repairs). When putting it back into the computer, it comes up with "A disk read error occurred: Press Ctrl + Alt + Del to Restart". I don’t know why this is happening but think it might have something to do with file permissions. I have tried a start-up recovery on the Vista boot CD and it found no problems. When trying to apply file permissions (and creating file perms for the SYSTEM group (as it didn’t have any for SYSTEM group)) it couldn't apply them for some of the System32 folder files. I have tried applying them as admin and with as powerful privileges I can get. All to no avail. When it is in my PC I can boot it up (I added it into my bootloader) and it boots up fine except when it logs in it comes up with the error - "Rundll32.exe - Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item" This message keeps coming back and nothing loads at all. Any help would be greatly received as I have got so far with the data recovery and want to avoid a reformat at all costs due to the vast number of programs installed and I don’t have much time on my hands! Thanks

  Read the article

• Windows 7 Synchronize folders BUT while some files are open

  - by Nick

  I need some way to synchronize 2 drives I have. I want to do this ofter (once a day or so) There is the main drive that I want to clone/synchronize on a backup hard disk. The problem is in that there is an open TrueCrypt file mounted as a drive, and its live. If you don't know what true crypt is, basically you create a file on a hard disk and that file is encrypted. It's constantly open and modified live. Also Its pretty large. 100GB + I will use freefilesync . There are many tools that can do that. My question is, is it safe to copy the encrypted file while its open ? Does the software freeze the file in one state and copies it ? Or will I get a corrupted file on the other drive ? It was not clear to me how windows handles that. I read something about shadow copy, and the software says that it supports this. Does anyone know something on the matter that can help me ? or some software that will work ok in my scenario ? Thanks

  Read the article

• How many bootable partitions are possible to have on one hard drive?

  - by draiden

  This may not be the correct place to post this; if that's the case, just let me know and point me in the right direction please! I'm thinking of building a box that needs to be lightweight and portable, and would need to be able to boot multiple installations of windows. I am needing to have multiple installations so that I can, for example, plug the box in to the network at one location, boot in to that location's partition, and have full access to everything I would normally need to do on a computer that has already been set up on that network. Then, when I go to the next client, I would be able to do the same thing, with the new location's partition, and have all of those network settings, drive mappings, etc., available there. Obviously I'd need to go through and set them all up on the different locations/networks, I'm not expecting it to magically know where I am and what I'm doing. It would be like I'm carrying around a computer that is configured for each place I need to go in one little box, instead of having to have multiple computers or having to reconfigure all the settings and such every time I go to another client. Or is there an easier way to do this that I haven't learned of?

  Read the article

• How to automatically start VM created by virt-manager?

  - by Jeff Shattock

  I have created a virtual machine with virt-manager that runs on kvm/qemu. The machine works well when started through virt-manager. However, I would like to be able to start and stop the VM through a script in init.d, so that it comes up and down along with the host. I need to have virt-manager show that the machine is running, and to be able to connect to its console through there. When I use the command line that is produced by running ps -eaf | grep kvm after starting the vm through virt-manager, I get some console messages about redirected character devices, but the machine does start and runs properly. However, I do not get any indication from virt-manager that it has started. How can I modify the command line to get virt-manager to pick up the running VM? Is there anything else about the command line that should change when starting outside of virt-manager? Command line is (slightly reformatted for readability): /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 512 -smp 1 -name BORON \ -uuid fa7e5fbd-7d8e-43c4-ebd9-1504a4383eb1 \ -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/BORON.monitor,server,nowait \ -monitor chardev:monitor -localtime -boot c \ -drive file=/dev/FS1/BORON,if=ide,index=0,boot=on,format=raw \ -net nic,macaddr=52:54:00:20:0b:fd,vlan=0,name=nic.0 \ -net tap,fd=41,vlan=0,name=tap.0 -chardev pty,id=serial0 -serial chardev:serial0 \ -parallel none -usb -usbdevice tablet -vnc 127.0.0.1:1 -k en-us -vga cirrus

  Read the article

• Repeated installation of malicious software to do outbound DDOS attack [duplicate]

  - by user224294

  This question already has an answer here: How do I deal with a compromised server? 12 answers We have a Ubuntu Vitual Private Server hosted by a Canadian company. Out VPS was affected to do "outbound DDOS attack" as reported by server security team. There are 4 files in /boot looks like iptable, please note that the capital letter "I","L". VPS:/boot# ls -lha total 1.8M drwx------ 2 root root 4.0K Jun 3 09:25 . drwxr-xr-x 22 root root 4.0K Jun 3 09:25 .. -r----x--x 1 root root 1.1M Jun 3 09:25 .IptabLes -r----x--x 1 root root 706K Jun 3 09:23 .IptabLex -r----x--x 1 root root 33 Jun 3 09:25 IptabLes -r----x--x 1 root root 33 Jun 3 09:23 IptabLex We deleted them. But after a few hours, they appeared again and the attack resumed. We deleted them again. They resurfaced again. So on and so forth. So finally we have to disable our VPS. Please let us know how can we find the malicious script somewhere in the VPS, which can automatically install such attcking software? Thanks.

  Read the article

• Hard drive causing BSOD

  - by JoshIrving

  I've come across a problem after building my new PC and installing a clean Windows 7. I originally planed on a RAID 1 or 0 but after further research I decided against it. So I was left with two 1TB Western Digital Black SATA 6Gb/s hard drives. My plan now was to use my second hard drive as a backup (using Windows Backup or 3rd party software). I set both hard drives to AHCI in the BIOS and installed Windows 7. I went through the lengthy process of downloading and installing each driver manually (latest versions), using the motherboard disk for a list of what I need. After a few restarts and before installing any software, I took an image backup onto DVD and the second hard drive. First witnessed the problem during the first scheduled Windows backup. The progress bar froze at about 70% (doc backup done, image backup in progress). It stayed still for 2 hours until it blue screened. Next time the backup froze, I tried shutting down. It logged me out and got stuck at the last step ("Shutting down" and blue spinner) for an hour, until I hard shutdown. I later realised this hasn't got anything to do with the backup. I ended up blue screening on almost every shut down (same place). Turns out, it's because of the second hard drive spinning down or turning off. The computer will now shutdown properly, as long as I remember to read or write to the second drive before executing shutdown. I've now set "Turn off hard disk after: Never" - No problems, so far. Do I have dodgy hard drive(s) or should I investigate the POWER_STATE_DRIVER_FAILURE BSOD - can it be a driver issue? AHCI?

  Read the article

• Windows XP VM on VMWare ESXi 4.1 "pausing" / blocked occasionally

  - by FelixD

  We have an issue with Windows XP SP3 VMs on VMWare ESXi 4.1.0 (the free version): They sometimes seem to "pause" for several minutes. This happens rarely (maybe once a month per VM, at least noticed only that often), but still is an issue for us. It happens for three different but similar VMs on three pretty different hosts (different hardware). I have the feeling that the "pausing" is not actually the CPU blocking, but probably the harddisks, but not 100% sure. The servers have one IDE disk (C:) and one SCSI (D:) and it might be either of the two. I have seen scheduled tasks simply not starting for up to 9 minutes and then running normally again with normal speed. They were totally blocked. This is not a load issue, the VMWare hosts have average load and the VMs in question already have reserved CPU resources plus high priorities for CPU and disk. The Windows boxes run mainly MySQL, Tomcat, FileZilla server, Cygwin stuff, Java + R applications, VMWare client, Elusiva Terminal Server pro, Nagios client. Not sure if this might be related with any of that software (e.g. Elusiva). Trying to debug this, there was nothing visible in Windows Event log, other logs in C:\Windows, VMWare events etc. Unfortunately the vmware.log file ends with "Log throttled". We found that we ran into 2 VMWare bugs there: The VMWare client writes lots on bogus messages in the vmware.log, which we now disabled (log level error setting) plus the bug that VMWare does not unthrottle the log (at least so far despite VM reboots). I know there is not much guidance and that may also be the reason why I so far didn't find anything related on the web or on ServerFault, but maybe some of this rings a bell with someone? Or please direct me to what more info to post. I hope that the vmware.logs get unthrottled eventually (can't easily restart the hosts at the moment). Thanks for any input!

  Read the article

• Windows Server 2008 R2 grinds to a screeching halt during file copy operations

  - by skolima

  When my Windows Server 2008 R2 machine is performing any large disk operations (copying 10GB files from one drive to another, copying similar file over network, merging HyperV snapshots, compressing large files), performance of the whole machine slows down terribly, everything becomes unresponsive. This is noticeable in any situation when the disk access is large enough not to fit in the cache. Are there any settings available for tuning this behaviour? I can accept slower file transfer if this would give me more responsiveness. System details: Dell Optiflex 960, Core 2 Quad Q9650, 8GB RAM, 2 SATA drives - 320GB (ST3320418AS) and 1TB (ST31000528AS), NCQ active on both, Intel 82564LM-3 Gigabit Ethernet, ATI HD 3450 graphics, Intel ICH10 bridge. We have multiple machines like this, every one is exhibiting the same behaviour. I though this was overkill for a workstation, apparently I was mistaken. Update: I guess I shouldn't have mentioned the HyperV at all. The above configuration is a standard workstation setup at the company I work for, this is not a server of any kind. I have at most 3 virtual machines working, and usually I'm the only person accessing them. Never the less, the slowdown occurs even when no VMs are running. On a Linux machine I'd simply ionice the copy process and I could forget about it, is there any way to manage IO priorities on Windows?

  Read the article

• Corsair SSD appears completely blank and does not retain written data

  - by ebanders

  I have a 180GB Corsair SSD (model# CSSD-F180GB2-BRKT) as the primary drive in a Windows laptop. Recently the machine became unbootable after installing Windows updates. Windows installed updates before the machine shut down and the next time the machine boot up it complained about not being able to find a bootable device. After finding fixmbr unsuccessful at making the machine unbootable, I investigated a little within knoppix. Fdisk revealed an empty partition table. A scan by Testdisk came up empty. And finally 'head -c 1024 | hd' reveals all zeros. Creating a primary partition spanning the whole disk completes successfully, but after a reboot the disk appears empty again. dmesg reveals no read or write errors. smartctl indicates that the drive is healthy- although the SMART attribute values do not appear to be read properly. "Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO" and "Threshold Page | INCONSISTENT IDENTITIES IN THE DATA" messages appear within the table of values. I don't have much experience with SSDs. Is this drive dead or something? Can anyone recommend any diagnostic tools that may be suited for diagnosing SSDs?

  Read the article

• Unable to connect to SQL Database (can the password be reset)

  - by user45450

  I have recently joined a company which has an SQL 2005 Server running a few databases. The server looks like no one has touched it in a couple of years and has this week it ran out of disk space. After a quick hard drive scan it looks like some of the databases have become a little bloated and particularly the Sharepoint_config~*~_log and WSS_Content_log.ldf have grown to about 15GB. I have been able to log into a couple of the other databases and use the shrinkfile command to free up disk space but for some reason I am unable to log into the sharepoint and Microsoft#SSEE databases (which gives me the "cannot connect to Sharepoint, a network related or instance specific error occurred..." when I try and connect) I can see that the database is running via the SQL surface configuration and I have made sure that the remote connection settings allow me to connect locally but I am still unable to log in either with windows authentication or locally. Is there any way to reset or recover the database login details so I can get in? ( I have tried logging in with all the administrative passwords I can find and after tracking down the company who installed it in the first place I found out that they have no idea what the password could have been)

  Read the article

• Install Peppermint OS three on Asus EeePC

  - by Kithoth

  I just had a new Asus EeePC R051CX. Out of the box, the installed OS is Ubuntu 12.04 LTS, but I am trying to install Peppermint OS three (as single boot). Problem. Once on live CD (well, live USB stick...), I'm in trouble in both following situations: Try Peppermint OS Live In this case, the first thing I get is a message reading The system is running in low-graphics mode Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself. I can solely press "return" to accept, then I have a list of 4 options to answer the question "What would you like to do?". But I simply can't do anything at this moment, except switching to console mode or rebooting (keyboard / mouse controls don't allow me to do anything else). Install Peppermint OS Something I really don't understand... it launches the Ubuntu Recovery Media (which was already installed when I received the device)! Also, it says in the bottom ERROR: This recovery media only functions on Ubuntu systems. All I can do is quit (that is, reboot). One last important thing that comes to my mind: this stick worked just fine on the other computers I've tried it on. I really hope someone could bring me the light, a friend of mine told me how cool this OS is for EeePCs. Don't want to give up! Thanks. Edit I finally could install Peppermint, but not by understanding why I couldn't do it the logical way. Instead, I reinstalled Ubuntu myself (erasing the factory one). Then, I could simply boot on my live USB and perform a fresh install of Peppermint. So, I still don't know how and why the mentioned problem occurred.

  Read the article

• Static DHCP binding

  - by Alex

  Good time of day, SF people. I have created a manual DHCP binding entry on a Cisco router so that a client would always get leased to it. The clients wants to get the same address on both of his dual-boot linux systems. He tries to get an IP address leased and he succeeds on one of the dual-boot operating systems. When he reboots to another one he gets a lease for a completely different one. I don't get it. The MAC addresses are the same (we checked in ifconfig, so what could be happening here? Why is the router confused? Or is it something else? Also, how can I check DHCP server IP address who I have got an IP address from (on Linux)? Configuration on Cisco: ip dhcp pool MANUAL_BINDING0001 host 192.168.0.64 255.255.255.0 hardware-address dead.beef.1337 dns-server 192.168.8.11 default-router 192.168.0.254 domain-name verynicedomainigothere.cn PS. Is it mandatory to use client-name configuration line?

  Read the article

• System Issues and Major Malfuctions after Failed hibernation Exit

  - by Sarah Seguin

  I have a HP G71-340US that went into hibernation mode for a while and when I tried coming out of it, I got an error message: You're computer cannot come out if hibernation . Status: 0xc000009a Info: A fatal error occurred processing the restoration data. File: \hiberfil.sys Any information that was not saved before the computer went into hybernation will be lost enter=continue So I hit continue and it ran soooo super slow it. It was seriously crawling. Finally I gave up and turned it off manually (IE press and hold the button). It's been a week or two since then and EVERY SINGLE TIME I have tried to to do ANYTHING it takes forever. When I say forever, I literally mean takes 5-7 minutes to load the internet, then the page itself, then to click a link, so on so forth. Eventually everything just goes not responding and I have to give up (4-6 HOURS later). I also cannot access my thumb/jump drives once I've managed to load windows. I was going to try runing malware bytes incase of a virus, but it's windows explorer developes errors and goes not responding on me. Currently I'm running scan disk or check disk and like every file is coming back unreadable. I let it run the last 2 hours straight in chkdesk and I'm only at 6 percent with around 500+ errors and still going. Yes, I've taken logs of the errors via cell phone camera and patience. A week or two prior to this happening I had to change our the hard drive due to blunt force trama next to the mouse. OH! Running on Windows 7: ) And I've tried loading the computer in safe mode and it makes absolutely no difference. Any and all help would be appreciated. I really don't know what to do from here and I'm kind of freaking out. I've googled different part of the error and things that I've done/seen and there are so many different answers/topics that I thought it best to just post the questions.

  Read the article

• Log Problem and bash script

  - by GvWorker

  Hello Guys, I have 11 Debian servers running on rackspace cloud hosting. All running VHCS2 for hosting management. 1 server is used for application and 10 are used for only smtp. My question is regarding smtp servers. Each server hosted 1 domain. My problem is when my client use smtp there's a log created in this directory /var/log/ but within 24 hours drives are full and server refuse all smtp connections. Then I deleted the logs and ran following command to check the disk space. df -h but it shows hdd still full and server is still refusing the smtp connections. Then I ran following command to see the truth du --max-depth=1 -h It shows the truth. The real disk space used. Then I rebooted the server and now server working fine. But after few hours same situation happened. Then I created the following script. #!/bin/sh rm -fr /var/log/* rm -fr /var/log/apache2/*.log rm -fr /var/log/apache2/*.log.* rm -fr /var/log/apache2/users/* rm -fr /var/log/apache2/backup/* reboot It worked for days but after that logs are again filling the hdd. Now I want the following solutions. If anybody can help me. When I delete files from server hdd will free up without rebooting Log should be in specific range. Like a specific size of file where old data overwrite with new data

  Read the article

< Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >