Search Results

Search found 14122 results on 565 pages for 'cable management'.

Page 334/565 | < Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >

• How do I record sound from my CD/DVD player without other system sounds in the mix?

  - by Software Monkey

  Using GoldWave I can record via the "Stereo Mix" channel, but I get no sound on the "CD" channel. Of course, using the stereo mix also mixes in all system sounds, including beeps, etc. I have the analog out on the DVD player connected to the CD-IN connector on the MoBo. I can hear CDs and DVDs playing just fine through my speakers - is this because the CD is also IDE data connection in to deliver the sound to the sound card, then? I specifically want to record a DVD; I can easily rip a CD using GoldWave's built-in ripper. Is there anything I have forgotten or have to enable? Or is it likely I have a damaged cable? My system is an MSI mobo and is running Windows XP SP3.

  Read the article

• What happened to “allow application to interact with desktop” checkbox in cluster manager for server

  - by David

  The cluster managing software for managing clusters on a windows server 2005 cluster had a checkbox for "allow application to interact with desktop" when creating a generic application resource. This appears to be gone in the management software for server 2008 clusters. Does anyone know where this option, if it still exists, is?

  Read the article

• DNS point to server on ISP and keep shared host too?

  - by Dwayne

  I know this is probably quite easy to do, but I might just have the right search sorted out... so here is the situation: We have example.com set up as a hosted server along with app1.example.com, app2.example.com and a few others. What I would like to do is set up the right zone file to also make our internal server addressable from the outside world as internalapp.example.com. This server sits behind a firewall (pfsense) and is hooked up to the world via a cable modem that is technically on DHCP from our ISP, but has had the same external IP for the past 15 months so far. What would be the best way to set this up?

  Read the article

• Exchange 2010 Discovery Search Fails

  - by ITGuy24

  When ever I run an Exchange 2010 SP1 Discovery Search I get the following error: "Search failed as the results link to the target mailbox '[email protected]' couldn't be generated." I have checked to ensure the discovery mailbox is enabled I created a new Discovery mailbox. I get the same error with both Mailboxes. The user account I am using to run the search is a member of the "Discovery Management" security group. I get the same error whether I use the Shell or the ECP to run the search

  Read the article

• SQL Server connection error (a weird one) (unsolved yet)

  - by Pinchy

  SQL Server can be connected from local system but can not be connected from remote system in the network. The error code is 40 from Visual Studio and 1326 when I try to connect to SQL Server from Management Studio. Firewall isn't the problem TCP/IP connection is enabled from SQL Server There are 2 pc terminals that can connect to the SQL Server but the 3th one cannot and using the same connection strings so the connection string is right It is SQL server 2000 any help will be appreciated thanks

  Read the article

• Nagios: Is it possible to have multiple IPs for a host?

  - by Aknosis

  In our office we have dual WAN setup, if our cable connection drops we still get connectivity via our T1. The only issue is that our office network is no longer available on the same IP so all Nagios check go critical because they can't connect. What'd be awesome is if I could have Nagios try IP 1 by default but if for some reason its failing on that IP try IP 2. I doubt this is possible with a default install but I'm wondering if there is any add-ons or some other magic that could make this work?

  Read the article

• Planning office network [closed]

  - by gakhov

  I'm planning to setup my office network from scratch and want to ask professional opinions or tips. My office is connected to Internet with Cable connection (100Mb/s). The devices i would like to connect are VoIP Phone (RJ-11), TV (WiFi/LAN), 3 laptops (WiFi), a few smartphones (WiFi), iPad (WiFi), Kindle (WiFi) and, probably, MediaServer (WiFi/LAN). As you can see, the most load will be on WiFi connections (probably, even if TV supports WiFi it's better to connect it by LAN?). So, i need help to choose the best routers combination (or even one?) to support stable connections for all these devices and minimize the total number of routers/adapters. Any thoughts? Thank you!

  Read the article

• plugging in a 3.3V 50pin laptop HDD to USB?

  - by barlop

  I have a 50pin laptop hard drive. 1.8" wide. This 50pin connector concerns me.. Even if I get an adaptor, How can I know which side of the connector takes the power? I don't want to plug it in the wrong way. And I don't have n adaptor.. Could people link me to adaptors too. but main question is, which side to plug it in when I get the adaptor. I want to be sure. I do not want to blow the hdd. For the 3.3V I have a plan. Connecting green and black and using the orange cable(3.3v) to feed power. I am not too worried about that bit. But as I said.. Main thing is I want to know which side is 3.3V hard drive is MK6006GAH

  Read the article

• Broken screen on laptop?

  - by John

  I recently damaged the screen on my HP Notebook...now my main concern is that I have Roboform installed and on my taskbar. The trouble is, because the screen is totaled, I can't see anything, and I discovered, to my horror, that I haven't backed any of the IDs and passwords up to a text document. Of course, I cannot access any of my content that hosts an ID name and password at all unless I can access Roboform that is installed on the notebook! Now hopefully I have ordered a SATA/USB cable to access the hard drive that I now removed form the notebook will I be able to access roboform that way and ALL the log-in details?

  Read the article

• Window 7 not recognizing printer for driver (re)installation

  - by user55406

  OK I am having this printer problem. I had a user delete her printer. Please don't ask, I don't know. She is using an HP deskjet 6940 printer, and for her desktop she has an HP dx2400, with Windows 7. When I plug in the USB cable it should install the new drivers, but it does not. I believe you guys don't need to know my network setup. I could be wrong. If you guys here at serverfault could help that will be great. :)

  Read the article

• SCOM 2012R2 Installation Error

  - by Jaoibh

  I'm installing OPSMGR I have 2 x servers running WS2012R2 with Windows updates applied SQL 2012 SP1 I've made sure the SQL collation is correct I'm installing all roles apart from Reporting on the SCOM server. All of the Prerequisites have passed. I can see the database is created in SQL but it doesn't go past "Operational Database Configuration" It hangs on "Importing System Library Management Pack" Any help would be greatly appreciated

  Read the article

• How can I disrupt my roommate's BitTorrent?

  - by bob

  We're on a 50 mb/s Comcast connection and our connection right now is coming in under 1.5 mb/s. Our roommate left for a week with BitTorrent running (Azureus client, we think). Our latency is approaching 300 ms. His door is locked up tight, and both his machine and the router for the house are located inside. I've even flipped the power breaker in the house and that barely works for 2 minutes. His laptop keeps on running, and once the cable modem and router come back up and the machine reconnects, the torrents resume in earnest. I've been running nmap and identified his IP on our LAN. Is there anything I can do over the LAN to make his torrents start to fail or slow down?

  Read the article

• Download of ~100MB file from Joomla + Docman component is incomplete (sometimes)

  - by Knix

  Hi, I hope this is right place for this. I am currently running Joomla v1 with a file management component called Docman on a Bluehost server. Some users (particularly with slower download speeds) are experiencing partial file downloads with some of my larger files (~100MB). I would like to keep the Joomla + Docman installation. Is there anything I can do to resolve this issue? I would greatly appreciate any recommendations that you may have. Thanks, Knix

  Read the article

• second monitor wont display

  - by Ryan

  hi all my problem is this: i have one video card (radeon hd 4350) and 2 monitors (dell). the first monitor works using dvi-to-dvi. the second does not, using hdmi-to-dvi. the monitor does not register any input. however when i use vga-to-vga, the second monitor does work, with a typically low vga resolution. we have tested the hdmi-to-dvi cable, so why does the monitor not register any input? using windows vista. i have installed all the lastest drivers, done all the basic stuff etc. any help at all would be appreciated. thanks

  Read the article

• How could all of my hard drives fail at once?

  - by Taylor

  I have an Ubuntu 13.04 server. Today I found the box had crashed. I restarted it, and now every single hard drive's partition table is missing. (1 SSD for /boot, /, and 3 2TB drives for RAID). I have the SSD connected to a laptop VIA USB-SATA cable, and sure enough, the partition table is missing. This tells me that the Motherboard / SATA controller / software actually broke the drives, not that they just can't be read correctly. Something similar happened to only the SSD a few months ago, and I was forced to just re-partition it. How the heck could his have happened? Bad Motherboard or SATA controller?

  Read the article

• Bay Speaker Panel Installation

  - by JordanD

  I purchased a bay speaker panel that has a molex connector and a sound connector. Do I need to run the sound connector through my tower and somehow out the back into the IO panel? Or is there supposed to be a place on my motherboard for it to connect to? This is a replacement for normal desktop speakers for me to save desk space. Edit: Is there an adapter for the sound cable to the mother board? If so; what is it called? Thanks

  Read the article

• Compaq Presario Laptop Monitor Problems

  - by Nishant

  I am attaching a few pics of my laptop monitor now . Can you please tell me if this is a hardware error which can be rectified by replacing the monitor ? How this happened - I accidently hit my leg on the laptop and jammed it against the wall and ever since the monitor is like this .I plan to replace the Monitor by buying a spare parts laptop that sells in ebay . I wonder if this is a LCD HARDWARE problem or problem with the cable that goes to the monitor . THE OS works fine in the computer .I hope my question is clear . http://img163.imageshack.us/gal.php?g=good1z.jpg

  Read the article

• How to get rid of disturbance on LCD monitor?

  - by Uday Kanth

  I have an Acer G195HQL LCD monitor and recently I've been noticing a lot of disturbance on the screen. They appear to be like flickering horizontal white lines. These lines are more apparent on dark backgrounds like grey/black. The curious thing is that, the intensity of these lines increases and decreases with no specific pattern. The disturbance temporarily goes away when I detach and re-attach the VGA cable at the CPU end. My speakers are magnetically shielded, but the problem persists even when I turn them off. I don't know what to do and this is really annoying me. Is it possible that my monitor is failing? Or is there anything I should check?

  Read the article

• create symlink to another machine

  - by microchasm

  Hi, I have 2 machines. Both running CentOS. Box1 is webserver with apache, php. Box2 is mysql, and file storage. The files will only be accessible from Box1 within the webapp. I'd like to somehow create a symlink or somesuch on box1 to a folder on box2 where uploaded files can be stored and retrieved. Security in mind, what would be the best way to go about linking these 2 boxes up in a transparent (to apache) way? NB: the boxes are connected directly to each other via a crossover cable; no lan access to box2. Much thanks!

  Read the article

• Suggestions for making sysfs parameters persist across reboots

  - by ewwhite

  I'm experimenting with large changes to Linux system runtime parameters exposed through the sysfs virtual file system. What is the most efficient way to maintain these parameters so that they persist across reboots on a RHEL/CentOS-style system? Is it simply dumping commands into /etc/rc.local? Is there an init script that's well-suited for this? I'm also thinking about standardization from a configuration management perspective. Is there a clean sysfs equivalent to sysctl?

  Read the article

• How to connect to internet 2 or more pcs with an usb wifi adapter

  - by bhaoahd

  In one pc I have an USB Wifi adapter (Realtek RTL8187L Chipset), from there a 10 meters cable to an outdoor antenna. With that I connect to a public Access Point. Now I want to be able to connect more computers to internet using that same connection that comes from the outdoor antenna, what options do I have to do this? I do have another usb wifi adapter with a small omni antenna, and a router encore ENHWI-G/A. This router can be used as a Wifi AP, but it needs a modem that works with the RJ45 connector. Is there a way I could take internet from the outdoor antenna, and create another AP indoor using that router to "repeat" that wifi that comes from the outdoor antenna? If creating this second AP is not possible, should I use some sort of local network between computers, connect my main PC with the outdoor antenna, and share the connection through the lan? (I would really prefer to have a second AP indoor so I can connect other devices like a Palm, but I am not sure how could this be possible with this router and the usb wifi adapter)

  Read the article

• Re-cased my computer now the power plug keeps shorting

  - by dunc

  I've just re-cased my computer. I got the new case free and thought I'd be able to swap everything over myself but apparently I've done something wrong. I'm OK with components generally but wasn't totally confident about doing this. So, my question is, when setting up a new PC or moving old components into a new case, what could I have done which causes the power cable plug to short/fuse when I plug it in?. Is this likely to be an issue with the cables from my PSU, or could it be the internal case connectors? What steps would you take to diagnose the problem? I'd rather not start again if I don't have to...! Thanks in advance,

  Read the article

• Controlling TV Channel Through Computer

  - by killianmcc

  I'm passing my TV input through my computer so that I can use the video stream in an application I'm creating which then outputs to my TV. E.g. Sky Digibox/FreeView box - Laptop - TV Where on my laptop I'll be using the stream in a WPF application so I can overlay XAML objects onto it. My question is, what would be the best way for me to send the signal back to the box to say change the channel for example? I don't want to have to use the remote, I want the computer to handle everything. Is there a standard cable these boxes have that could take what would normally be a remote control signal and use that as input instead? Or would I have to go down the route of looking at some sort of Infared LED to send the signal recreating the remote? Apologies if this is not clear enough, let me know and I'll try and be more precise.

  Read the article

• Use LAN to interface Synergy while having WiFi connected to internet

  - by freonix

  Similar question and solution I have LAN and WiFi connection, with the WiFi connected to internet and the LAN is simply connected via an Ethernet cable between two computers. I need to get Synergy working without compromising the WiFi internet. I've tried the solution above but couldn't seem to work. Both of the computer are running Windows XP. Even setting the LAN IP to static and under the same subnet doesn't seem to work. Anyone with similar situation and got Synergy to work? edit : Refined the question for clarity. Also, the computer are able to ping each other. Remote desktop can be accessed as well. I suspect the problem lies in Synergy's configuration.

  Read the article

• How can a cloud be created from virtualization or how is it different from virtualization?

  - by Echelon

  I have heard that virtualization is the basis of Cloud,so If i have a machine with xen as virtualizing environment and many vms running on it,then can that be called as a cloud. Is it true that vms that scale based on load and memory is called cloud and vms that do not scale is called as just virtualization! How can a vm scale??Based on my understanding for xen once we fix cpu and ram,it cant go beyond that (am aware of Dynamic memory Management) so how it really scale?.Can any one please clarify this

  Read the article

< Previous Page | 330 331 332 333 334 335 336 337 338 339 340 341  | Next Page >