Search Results

Search found 14122 results on 565 pages for 'cable management'.

Page 337/565 | < Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >

• PCI IDE Controller

  - by mercutio

  I have a suspicion that the onboard IDE controllers may not be working. Every disk I use to setup this machine reports as damaged (using a win xp installation to test, since it gets to partition setup fastest) So, I popped an IDE PCI Controller card in, to test with, but no drives are showing up in the bios now. I went into setup and changed the BIOS settings to disable onboard IDE1 and 2 to test, but still didn't detect the drives. How do I get that working? It's a standard PC with a 160GB disk and DVD Drive on master and slave channels on a single cable, if that helps. Let me know what else I need to state.

  Read the article

• DNS MX record workaround

  - by onemach

  I use a tk domain name and another web host to host my blog site. I redirect DNS query to xxxhost.[myhost].com and tell my web host my domain name. (since my web host is virtual one) This works OK. But now I want to use an email service provided by third party, which requires adding a MX record to my DNS service. But this cannot be done on my web host management pages. Is there any workaround for this?

  Read the article

• Ubuntu Wired network(ethernet does not work)

  - by user36777

  It was working just fine, until the other day I yanked it out. The wireless works just fine on the same router. If I login to a windows 7 instance on this dual boot laptop then the ehternet works just fine. So it's not a hardware, cable or router issue. The card even gets an ip, but I can't connect to the internet. Here are the details from route, iptables, ifconfig, ping etc. Any ideas? I have been struggling with this for day, none seems to have an answer. http://pastie.org/954816

  Read the article

• Access Domain over Wireless

  - by William

  I have an active directory server and all hard wired clients connect perfectly fine. However any wireless clients do not recognize that they are connected to the domain, despite the dns server being appropriately set to the domain controller for both wired and wireless connections. Also - both wired and wireless clients are on the same subnet. I am using a Verizon food actiontec router. What am I missing? For instance, this is the same computer connected first via an Ethernet cable and second via the wireless.

  Read the article

• Setting up email account on Ubuntu Server

  - by user44520

  I am very new in server management thing. I want to make email accounts like [email protected]. I know something to do with Sendmail thing , but dunno what ? I am on Ubuntu 10 server.

  Read the article

• I'm having a hard time choosing a hosting provider...

  - by matthewsteiner

  So, what hosts do you recommend? The problem is, I can't manage the server. I know there's options out there like slicehost and vps.net, but management doesn't come with those. All I need is a simple lamp stack that can easily scale. Stuff like cloud sites (rackspace) is too expensive (starts at $150/month). I only need something small for now. Suggestions?

  Read the article

• USB devices don't work after restoring from Stand By

  - by Steve

  Hi. I'm running Windows XP SP3 on a NEC Versa L1100 laptop. If I wake my laptop up from Stand By, no attached USB devices will function. Device Manager shows all USB entries to be working properly. There is an option to "Allow the computer to turn off this device to save power" in the Power Management properties of USB entries. Is this causing the issue or something else? I have the latest drivers for my motherboard installed.

  Read the article

• Computer restarts infinitely after Bios/Motherboard screen

  - by user13176

  Like every morning I turn on my computer (which is kinda new and only couple months old) and I never had any issue with it until now. It starts booting, shows that very first screen which has some motherboard picture and stuff and then it show which buttons to press to enter BIOS and etc. Then it suddenly restarted and after that just kept restarting every 3-5 seconds forever. What could that be? I unplugged power cable, checked all the cables, moved a case, it had some wires stuck under it, blew some dust (but didn't open the case yet) and I tried to boot again and it booted successfully and I am writing this issue now. My specs: i3-3220 3.30Ghz 8GB DDR3 RAM 1TB HDD GeForce GTX 650 Windows 8 x64 I also recently upgraded my security software (that's the most recent thing I did) and it includes ZoneAlarm firewall, Comodo Antivirus and Spybot Search & Destroy. But maybe it doesn't have anything to do with this. Cheers

  Read the article

• Combine WLAN with LAN

  - by fiatux

  I have D-link DSL 2750U wireless router. My PC and notebook are connected to router by Wi-Fi. They can share files or ping each other. I have a network storage unit plugged into router by an ethernet cable. Any of the computers cannot reach that storage unit or ping it. I guess my router isolates LAN network from WLAN network. Is there a way to combine them and get the router treat all devices connected to router in a single network? Thanks.

  Read the article

• Can i connect my modem's ethernet and usb slot to two computers simultaneously??

  - by Rajasekar

  I have NETGEAR BROADBAND MODEM. I had a desktop and laptop. I had connected internet to dekstop by using Ehternet slot on my modem to my ethernet slot on my Desktop. I need internet connection on my Laptop too. There is another slot in modem which can be connect using USB cable. Whether i can connect the laptop with that USB slot in my modem and use both the computer's internet? whether it will work??

  Read the article

• Redirect channel to another speaker

  - by stex

  Hi, I'm not sure about the title but don't know how to say it in a clearer way. My Soundcard is a Creative X-Fi and I'm using the Creative console starter. Now I'd like to use my speakers not only for my normal screens but also when using a beamer. Due to my room's geometry, the only place for the beamer's projection is a wall which is right to my normal screens (so the projection would be between the front right and the rear right speaker). Now I'm thinking about redirecting the channels to the correct speakers somehow. As far as I remember, in previous version of creative console starter there was an option to do this (e.g. redirect front left to rear right output channel). Does anyone know how to do this with software? Of course I could install a cable switch, but if there's a way without I'd prefer this :) Thanks in advance.

  Read the article

• Why does my ethernet connection keep re-connecting, only with Windows?

  - by Nick Bolton

  I'm using Windows 7, and I have several computers on my network. For some reason, the network connection keeps disconnecting and immediately re-connecting. Infact, it may just be refreshing the DHCP lease... but I'm not sure. I've tried changing the network card, and ethernet cable, but the issue is still happening. I can only imagine that the issue is with the ethernet switch, but this doesn't happen on my other desktop which uses the same ethernet switch. Any ideas?

  Read the article

• 'Access denied' while partitioning on Vista

  - by shinokada

  I went to Disk Management and right-click C drive to shrink. It started the process and after long time passed, 'Access denied' error came out. I tried a couple of times, but all are the same result. Could anyone help me how to partition C drive on Vista please? Thanks in advance.

  Read the article

• Notebook display not working properly

  - by jfcfar

  I have an old Acer TM4001 notebook. If the laptop is powered-off, with the lid closed, when I power it on, it generally works. Then, without touching anything, if I reboot the computer the internal display wil not work anymore. To make it working again I need to shut down the pc, close and reopen the lid and then turn it on. If I close and reopen the lid if it is not working after power the pc on, it won't work. When the screen is working, closing and opening it has no effect (the data cable seems ok). The external monitor always works as expected: If the internal display is not detected, the external will be the main (and only) display. This is not OS-related. When the screen is not working I cannot see the POST. What could be the cause for this?

  Read the article

• How does communication between 2 computers in a single network happen?

  - by learner

  Lets say I and my friend connect our computers with a LAN cable. I ping my friend with his IP address. How does it work? Since we are in the same network, we don't even need IP addresses, do we? Isn't IP addressing only relevant in case of inter-network communication? What will the ping command do with his IP address? How will it eventually find his physical address (NIC address)? (no ARP here, because that would involve a router at the edge of the network, which doesn't apply here). Am I wrong somewhere?

  Read the article

• Computer won't start when connecting SATA HDD

  - by vlad

  I just bough a new HDD some time ago and recently i bought another SATA cable to have both HDDs connected at the same time, to transfer all the files from the older one to the newer. When i connected both of them, the computer started working, i tapped F2 to go to bios to make sure it was detected, and then after 5-10 seconds the computer instantly shut down. After this incident, my computer won't start at all when connecting the SATA power supply to the old HDD. If i connect only my new drive, it works without any problem. If i connect only my old drive, or both the old drive and the new one, and then push on the power button, the cpu fan simply rotates about 5 degrees and then stops.. and that's it, the computer doesn't start, and no sound from the pc speaker either. Is there any way to recover my files from the old HDD and transfer them to my new one? I do not want to use the old HDD any more, i only need to save all my files.

  Read the article

• Need to hookup HP dv7-3085dx with NVIDIA GeForce GT 230M to my Dell 30 inch LCD 3007WFP at max resolution

  - by user14660

  I recently bought an HP laptop (dv7-3085dx) which is supposed to have a pretty good video card (NVIDIA GeForce GT 230M). The card is supposed to output a max resolution of 2560x1600 which is also the max resolution of my monitor. I've now bought an HDMI to dual link DVI cable - this is after Best Buy's 70 dollar HDMI to DVI (perhaps it was 'single' link?) didn't give me the best resolution. In Windows 7, when I try to set the max resolution for my 30" monitor, I only get 1280x800, which is absurd. The monitor is great, I love the laptop and the video card supposedly supports such resolutions. I therefore can't figure out why I'm not getting a better resolution. When I "detect" my monitor in Windows 7, it is shown correctly as a DELL 3007WFP!

  Read the article

• ViewSonic LCD Monitor Touch-input

  - by Synetech inc.

  I bought a used 15" ViewSonic LCD monitor (VP150m) and noticed that it has a 3.5mm connector on the back labeled “touch i/o”. I’m trying to figure out how to use the touch function but am having trouble finding anything useful. First, I cannot find any information on what kind of cable it uses (TS, TRS, TRRS, etc.), or how to connect it to the computer. Second, I cannot find touch drivers for it—though I can find a page that mentions how easy it is to install them. Does anyone have any information on using the touchscreen function of the VP150m? Thanks a lot.

  Read the article

• Social Media event Bandwidth requirements

  - by Bob G

  I have an one day event in July 2012, hosting 250 attendees for a social media event. We will be uploading live video to a website, allowing the press to access the web, and some vendors will be showing off their web sites for clients and visitors. The staff will need access for uploading files and information as needed. We had the event last year and tried a cable modem brought in with 2x2 megs just for the streaming video which worked well. I had 4 wireless hot spots, rented from a company 1.5 mbps x 780 kbps, which was were a complete failure. I was assured the 4 hot spots would be enough, but they did not work. What would be the proper way to get the bandwidth required to make the one day event successful? The setting is a Private Country Club where running cables everywhere is very tough.

  Read the article

• How to enable Integrated Load Balancing in Windows 8

  - by intodevelopment

  One of the cool new features many sites mention is "Integrated Load Balancing" in Windows 8. It is supposed to do the following: If you have multiple active network connections, Windows 8 will intelligently balance the network traffic between them for performance Source: Short: Some of what Microsoft didn’t show of Windows 8 I would love to see this feature in action. I am connected to a WiFi access point and to a different network by cable. Yet I don't see the operating system 'intelligently' balance the network load when for instance downloading multiple files. Is there any way to enable it or should I adjust my expectations?

  Read the article

• How can I get Windows 7 to switch audio from a monitor (with built-in speakers) to headphones when t

  - by tnorthcutt

  I have an HP dv5t laptop running Windows 7 64 bit with an Acer H235H monitor connected to it via an HDMI cable. The monitor has built-in speakers, which are a huge improvement over the laptop's speakers. However, when I want to use headphones, right now, I have to connect them to the laptop, then right-click the sound icon in the task bar, select Playback Devices, right click the monitor, and disable it. Is there any way to get Windows 7 to automatically switch the output to the headphones when they're plugged in? That's the behavior that happens without the monitor attached (i.e. it will switch from the laptop speakers to headphones when headphones are plugged in). I have the same issue with a Sony Vaio laptop running Windows 7 64-bit and an identical monitor, for reference.

  Read the article

• accidentally deleted a volume in windows

  - by Buddy Casino

  Hi! I accidentally deleted a volume in windows disk management. Is there an easy way to undo that action? Or do I have to use a file recovery tool? Thanks a lot!

  Read the article

• Can Kies provide a data connection so my phone can avoid mobile data usage?

  - by Highly Irregular

  I regularly connect my Samsung phone by USB cable to my PC to charge it up, and when I run the Samsung Kies app on the PC I can sync data too. Is it possible for my phone to use my PCs internet connection through the USB link to avoid data charges? I don't have a wifi connection available. It would make sense if Kies could provide this, or perhaps there's some other way I can achieve it without wifi, such as using Bluetooth. I have a Samsung GT-S7500, though this question should apply to many other models.

  Read the article

• SQL server text

  - by Nick P

  I will be taking an independent study class on SQL server management. I will have to configure SQL Server 2008 on a Windows Server 2008 system. I was wondering if anyone could suggest decent text for configuration/administration of SQL Server 2008. The Murach text doesn't look like it will take me far.

  Read the article

• What does "Flush the Firewall" mean?

  - by Qasim

  I know this is a real newbie question but what does it mean when someone says they "flushed the firewall". I got locked out of my server a few times due to the enhanced security configuration I had done and when I contacted my server management company, they said both times that they flushed the firewall and I was allowed back in. I hope "flushing the firewall" doesn't mean they reduced the security settings at all.

  Read the article

< Previous Page | 333 334 335 336 337 338 339 340 341 342 343 344  | Next Page >