Search Results

Search found 13904 results on 557 pages for 'host on demand'.

Page 338/557 | < Previous Page | 334 335 336 337 338 339 340 341 342 343 344 345  | Next Page >

  • "Request not supported" in IPCONFIG (WinXP SP3)

    - by pablog
    In a customer PC (Windows XP SP3), suddenly the network went down: the network adapter appears with an error mark. I replaced the network card, but the new one does the same thing. When I enter IPCONFIG, XP shows this error (in standard and safe mode): Internal error occurred Request not supported Unable to query host name If I start the system with a boot cd the PC runs fine, so the problem seems to be in the XP installation. I tried: uninstalling and reinstalling the network card in the Device Manager disabling and reenabling the card netsh int ip reset netsh winsock reset catalog and a couple of "reset" programs (WinsockxpFix.exe, etc) with no luck. Is there any way to fix it without reinstalling XP? TIA, Pablo

    Read the article

  • How to configure fastcgi with lighttpd

    - by silverburgh
    Hi, I am trying to configure FastCgi with ligttpd server. I was able to run vanilla lighttpd like this: ./lighttpd -f lighttpd.conf And then I compile/install the source of fastcgi, and I add the following in my lighttpd.conf: fastcgi.server = ( "/fastcgi_scripts/" => (( #"host" => "127.0.0.1", #"port" => 9091, "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", "docroot" => "/" # remote server may use # it's own docroot )) ) But lighttpd won't start after I add the above. Can you please tell me how can I run fastcgi with lighttpd? I want to use a c program with fastcgi with lighttpd. Thank you.

    Read the article

  • Should I disable write caching on my Windows 2008 VM?

    - by javano
    I have a Windows Server 2008 x64 Standard virtual machine that runs on a machine with a hardware RAID controller, a Perc 6/i, which has a battery on-board. Doing everything I can for additional performance, I think I should disable this. Is this very dangerous though? My understand is that Battery Backed Write Caching gives a performance boost to the host OS, telling it the write was complete when they are still sitting in flash waiting to be written. However, I can't see how it would be detrimental to performance, but is there a gain (even if marginal) to enabling it / disabling it? P.s. There machine has a backup power. Here is a screen shot for clarification:

    Read the article

  • Difference between tcp recv buffer and tcp receive window size?

    - by pradeepchhetri
    The command shows the tcp receive buffer size in bytes. $ cat /proc/sys/net/ipv4/tcp_rmem 4096 87380 4001344 where the three values signifies the min, default and max values respectively. Then I tried to find the tcp window size using tcpdump command. $ sudo tcpdump -n -i eth0 'tcp[tcpflags] & (tcp-syn|tcp-ack) == tcp-syn and port 80 and host google.com' tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 16:15:41.465037 IP 172.16.31.141.51614 > 74.125.236.73.80: Flags [S], seq 3661804272, win 14600, options [mss 1460,sackOK,TS val 4452053 ecr 0,nop,wscale 6], length 0 I got the window size to be 14600 which is 10 times the size of MSS. Can anyone please tell me the relationship between the two.

    Read the article

  • Connection timed out exception, why?

    - by Dheeraj Kumar Aggarwal
    I am developing an application which uses embedded tomcat server 7, and deploys a web application on embedded server. My application accesses the embedded webapp through Rest APIs, but my clients are getting Connection Timed Out exceptions and port is also not blocked. I never gets this exception when I install this application on my local machine. Some points: IP address is used in the host name part (They are able to access this IP address on other port) Port is not blocked We are using Apache HttpClient library to access the URL Timeout interval seems not to be an issue. What are the possible reasons for this exception Connection Timed Out? or How can I simulate this problem on my local machine? Any pointers would be helpful.

    Read the article

  • Get sessions' remote IP from Teamviewer log file

    - by etuardu
    I'd like to know who has logged in to my machine and when. I have two TeamViewer log files: Connections_incoming.txt and TeamViewer7_Logfile.log. The first one is quite plain and lists, as its name says, the incoming connections to the machine, reporting the local name of the remote host, login time, logout time, and some ids. e.g.: 173274362 MYLAPTOP 20-02-2012 17:32:16 20-02-2012 17:50:42 Master RemoteControl {C5AAE483-ED0B-54B8-9235-7AE597CAD342} This is almost all what I need, but unfortunately no remote IP address is reported here, so I checked for IPs in TeamViewer7_Logfile.log but it is really messy. It indeed contains some IP addresses but I can't understand which one is bound with the items in the first log file. Is there a way to interpolate the two logs to get what I need? Should I search the second file for some particular text? What do you suggest?

    Read the article

  • What are the limitations of virtual machines?

    - by j-g-faustus
    I'm considering setting up a virtual machine running Windows, with Ubuntu 10.10 as the host OS, for those cases where I have a Windows-only program. I understand that using a VM will lose some performance, but are there other limitations to what the OS in a virtual machine can do compared to "running on bare metal"? For example: Can a VM play games, like Dragon Age Origins or Civilization V? (Possibly with poorer framerates and/or lower resolution, but does it play at all?) Can a VM rip DVD/Blue-ray using AnyDVD or similar Windows program? Can a VM handle new hardware that requires dedicated drivers, but the drivers are only available for the OS running inside the VM? (Ex. graphics card, digital camera, card reader for smart card authentication.) Is it possible to say anything about "general limitations" of VMs, or is this wholly dependent on the specific VM?

    Read the article

  • Possible to use LVM partitions inside a vmbuilder created KVM virtual machine?

    - by Tauren
    I have an Ubuntu 9.10 host system with LVM partitions running KVM. I've been creating VMs using vmbuilder using LVM partitions for each VM instead of files for the VMs. When I configure a VM using vmbuilder --part, the partitions in the file I'm using are created as regular partitions (sda1, sda2, etc.). What I'd like to do is use LVM inside of the VM in case I need to resize the partitions at some point. But I don't see any options for doing that using the vmbuilder tool. It seems like this might be a common request to avoid using kpartx, etc. Is there something I'm missing, or is this just not possible with vmbuilder?

    Read the article

  • Correct password for ssh key rejected when ssh-d into machine

    - by user20342
    When I am logged into my machine directly, I can do all git operations, and when prompted for a password, the password is accepted. When I ssh into the same box and run git operations on the same repos, the password is rejected. Relevant section of .ssh/config looks like this: # Generic settings Host * ServerAliveInterval 600 ControlPath /tmp/ssh-%r@%h:%p ControlMaster auto KeepAlive yes IdentityFile ~/.ssh/id_rsa.pub Transaction looks like this when I login when I ssh into my box: {12-12-03 9:41}hbrown-wks2:~/workspace/spt/project@master??? hbrown% git pull Enter passphrase for key '/home/hbrown/.ssh/id_rsa.pub': Enter passphrase for key '/home/hbrown/.ssh/id_rsa.pub': Enter passphrase for key '/home/hbrown/.ssh/id_rsa.pub': Permission denied (publickey). fatal: Could not read from remote repository. Please make sure you have the correct access rights and the repository exists. Using bash does not appear to make a difference (i.e. ssh-agent /bin/bash). This is a recent development, but I can't cite the change that caused it.

    Read the article

  • Apache on Win32: Slow Transfers of single, static files in HTTP, fast in HTTPS

    - by Michael Lackner
    I have a weird problem with Apache 2.2.15 on Windows 2000 Server SP4. Basically, I am trying to serve larger static files, images, videos etc. The download seems to be capped at around 550kB/s even over 100Mbit LAN. I tried other protocols (FTP/FTPS/FTP+ES/SCP/SMB), and they are all in the multi-megabyte range. The strangest thing is that, when using Apache with HTTPS instead of HTTP, it serves very fast, around 2.7MByte/s! I also tried the AnalogX SimpleWWW server just to test the plain HTTP speed of it, and it gave me a healthy 3.3Mbyte/s. I am at a total loss here. I searched the web, and tried to change the following Apache configuration directives in httpd.conf, one at a time, mostly to no avail at all: SendBufferSize 1048576 #(tried multiples of that too, up to 100Mbytes) EnableSendfile Off #(minor performance boost) EnableMMAP Off Win32DisableAcceptEx HostnameLookups Off #(default) I also tried to tune the following registry parameters, setting their values to 4194304 in decimal (they are REG_DWORD), and rebooting afterwards: HKLM\SYSTEM\CurrentControlSet\Services\AFD\Parameters\DefaultReceiveWindow HKLM\SYSTEM\CurrentControlSet\Services\AFD\Parameters\DefaultSendWindow Additionally, I tried to install mod_bw, which sets the event timer precision to 1ms, and allows for bandwidth throttling. According to some people it boosts static file serving performance when set to unlimited bandwidth for everybody. Unfortunately, it did nothing for me. So: AnalogX HTTP: 3300kB/s Gene6 FTPD, plain: 3500kB/s Gene6 FTPD, Implicit and Explicit SSL, AES256 Cipher: 1800-2000kB/s freeSSHD: 1100kB/s SMB shared folder: about 3000kB/s Apache HTTP, plain: 550kB/s Apache HTTPS: 2700kB/s Clients that were used in the bandwidth testing: Internet Explorer 8 (HTTP, HTTPS) Firefox 8 (HTTP, HTTPS) Chrome 13 (HTTP, HTTPS) Opera 11.60 (HTTP, HTTPS) wget under CygWin (HTTP, HTTPS) FileZilla (FTP, FTPS, FTP+ES, SFTP) Windows Explorer (SMB) Generally, transfer speeds are not too high, but that's because the server machine is an old quad Pentium Pro 200MHz machine with 2GB RAM. However, I would like Apache to serve at at least 2Mbyte/s instead of 550kB/s, and that already works with HTTPS easily, so I fail to see why plain HTTP is so crippled. I am using a Kerio Winroute Firewall, but no Throttling and no special filters peeking into HTTP traffic, just the plain Firewall functionality for blocking/allowing connections. The Apache error.log (Loglevel info) shows no warnings, no errors. Also nothing strange to be seen in access.log. I have already stripped down my httpd.conf to the bare minimum just to make sure nothing is interfering, but that didn't help either. If you have any idea, help would be greatly appreciated, since I am totally out of ideas! Thanks! Edit: I have now tried a newer Apache 2.2.21 to see if it makes any difference. However, the behaviour is exactly the same. Edit 2: KM01 has requested a sniff on the HTTP headers, so here comes the LiveHTTPHeaders output (an extension to Firefox). The Output is generated on downloading a single file called "elephantsdream_source.264", which is an H.264/AVC elementary video stream under an Open Source license. I have taken the freedom to edit the URL, removing folders and changing the actual servers domain name to www.mydomain.com. Here it is: LiveHTTPHeaders, Plain HTTP: http://www.mydomain.com/elephantsdream_source.264 GET /elephantsdream_source.264 HTTP/1.1 Host: www.mydomain.com User-Agent: Mozilla/5.0 (Windows NT 5.2; WOW64; rv:6.0.2) Gecko/20100101 Firefox/6.0.2 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: de-de,de;q=0.8,en-us;q=0.5,en;q=0.3 Accept-Encoding: gzip, deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Connection: keep-alive HTTP/1.1 200 OK Date: Wed, 21 Dec 2011 20:55:16 GMT Server: Apache/2.2.21 (Win32) mod_ssl/2.2.21 OpenSSL/0.9.8r PHP/5.2.17 Last-Modified: Thu, 28 Oct 2010 20:20:09 GMT Etag: "c000000013fa5-29cf10e9-493b311889d3c" Accept-Ranges: bytes Content-Length: 701436137 Keep-Alive: timeout=15, max=100 Connection: Keep-Alive Content-Type: text/plain LiveHTTPHeaders, HTTPS: https://www.mydomain.com/elephantsdream_source.264 GET /elephantsdream_source.264 HTTP/1.1 Host: www.mydomain.com User-Agent: Mozilla/5.0 (Windows NT 5.2; WOW64; rv:6.0.2) Gecko/20100101 Firefox/6.0.2 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: de-de,de;q=0.8,en-us;q=0.5,en;q=0.3 Accept-Encoding: gzip, deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Connection: keep-alive HTTP/1.1 200 OK Date: Wed, 21 Dec 2011 20:56:57 GMT Server: Apache/2.2.21 (Win32) mod_ssl/2.2.21 OpenSSL/0.9.8r PHP/5.2.17 Last-Modified: Thu, 28 Oct 2010 20:20:09 GMT Etag: "c000000013fa5-29cf10e9-493b311889d3c" Accept-Ranges: bytes Content-Length: 701436137 Keep-Alive: timeout=15, max=100 Connection: Keep-Alive Content-Type: text/plain

    Read the article

  • Remote Desktop Services In A Virtual VMWare Environment

    - by Christopher W. Szabo
    I have a quick question regarding Microsoft Remote Desktop Services in a virtualized environment using VMWare. This environment will actually be hosted in a large data center with in a cloud that is offered. This particular data center has the ability to establish high speed point to point connections with customers via metro-ethernet who are hosted in the cloud. The result is that customers can actually host their corporate domain in the data center's cloud. Put the merits of such a configuration aside for the time being. Believe me when I say that the cloud is stable and had enough hardware behind it to rival a dedicated cabinet. My question has to do with RDS in a virtual environment, which would amount to virtual desktops hosted on a virtual server. I've read that this works without issue using Hyper-V and VMWare. But before I take the plunge I wanted to get some feedback from the community.

    Read the article

  • OpenLDAP server logs filled with "TLS negotiation failure"

    - by WildVelociraptor
    I recently migrated an old OpenLDAP setup to a newer server, with a more robust certificate setup. Currently, most hosts are required to verify the cert matches the host: tls_checkpeer yes TLS_REQCERT always In the server logs, there are multiple occurences of: Nov 6 10:45:08 <servername> slapd[1773]: conn=2785646 fd=35 closed (TLS negotiation failure) These errors appear from multiple hosts, but there don't seem to be any issues actually logging into those servers with an LDAP account. Does anyone know what would cause these errors? The server is running Ubuntu 12.04.2, and OpenLDAP version 2.4.28. The cert was generated using GnuTLS.

    Read the article

  • How do http proxies determine https traffic with a single port?

    - by badunk
    If a proxy receives the tcp packet, then the destination ip address and port are that of the proxy. In that case, I imagine the only way a proxy can still resolve the intended destination is either through routing the source ip address/port or through the host field in the http header. Is this correct? In both Fiddler and Charles http proxies, I noticed that the tool accepts both http and https connections through a single port that you can specify. What do these tools do to tell the difference between the two types of connections?

    Read the article

  • P4 vs. i3/i5 *T in power consumption and performance [migrated]

    - by Walter Zomb
    I am running an Intel P4 prescott with HT on my home server (linux file server on encrypted disks on software-RAID5 and virtualisation host for three further machines). The performance for this purpose is really okay. When the system is idle it consumes about 140W power. I am considering buying a new mainboard for an e.g. Intel i3-2100T or an Intel i5-2390T. Both are low power CPUs with a TDP about 40W. Has anyone experiences how much power a recent mainboard with one of these CPUs an 3-4 'green-energy' disks (6W each) consumes? Do I get underneath the 100W threshold? What's about the performance of these low power CPUs? Are they comparable to an Intel P4 with HT? regards, walter

    Read the article

  • Mac OS X Snow Leopard: permissions changed on /var results in dns lookup issues

    - by Ivan
    I was attempting to solve an issue ("/var/log/msmtp.log: permissions denied" error when attempting to send mail using msmtp) when I did this: > chmod -R 770 /var After that, my machine would not resolve domain names via cURL. (ping also fails) But, oddly, I can enter domain names into Safari and visit any web pages w/o a problem... I'm actually not sure if the chmod command is the cause of the problem, but I suspect it is. Also, if I ls -l on /var (or /private/var) it doesn't seem that any of the subdirectories or files there actually changed permission, but there are many, so I can't say that conclusively... Incidentally, I fixed the original error (msmtp.log permission denied) by setting TMPDIR=/tmp in my local environment (bash). Now the error goes away, but I get this error: msmtp: cannot locate host domainname.org: nodename nor servname provided, or not known Any ideas about how to go about getting DNS working again?

    Read the article

  • Dummy HTTP server for debugging

    - by Andrea
    This is more or less the inverse of my previous question. I need to debug some HTTP requests that I am making. Since these requests arise from the use of some external libraries, sometimes I am not sure of what is the actual data I am sending. Is there some dummy server (for Linux) that accepts HTTP requests and just prints them somewhere so that I can inspect them? I would like to be able to see in plain text the full request, like POST /foo HTTP/1.1 Host: www.example.com Accept: text/xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 Accept-Language: en-gb,en;q=0.5 Content-Type: text/plain Content-Length: 11 Hello world

    Read the article

  • Connection Reset by Peer error with Apache and JBoss 7.1.1

    - by vikingz
    We are seeing errors on some of our QA testing scripts that intermittently throw Connection Reset By Peer errors. The Test scripts submit requests via F5 which forwards requests to Apache (2.2.21) with a mod_jk load_balancer with the following setting for each worker in the worker.property worker1 props worker.worker1.type=ajp13 worker.worker1.port=8109 worker.worker1.lbfactor=1 worker.worker1.host=skunkhost1.com worker.worker1.connection_pool_timeout=30 and here is what is in the JBoss domain.xml for the AJP port from JBoss 7.1.1 <unbounded-queue-thread-pool name="SKUNKY.APP.AJP"> <max-threads count="300"/> <keepalive-time time="3" unit="minutes"/> </unbounded-queue-thread-pool> Here is httpd.conf Timeout 300 KeepAlive On KeepAliveTimeout 15 MaxKeepAliveRequests 100 TraceEnable Off My question is that is it posisbe that apache times out and closes the connection while jboss is still ready and working on the request? What might be causing the Connection Reset By Peer error?what am i missing here? Any help is majorly appreciated!! Sincerely KK

    Read the article

  • Default gateway is in different subnet. How to configure in RHEL6.2

    - by Dmytro Leonenko
    I have two subnets routed to my server from ISP. I have only one gateway ip. The gateway is on the same VLAN as my IP address. For example netowrk 1 is 1.0.0.0/24 and network 2 is 2.0.0.0/24. Both are routed to eth0 by my ISP. Gateway is 1.0.0.1. My host ip is 2.0.0.1/24 (eth0) So I can configure default gateway manually with ip route add default dev eth0 ip route add default via 1.0.0.1 and then internet connection works properly. How do I configure it in /etc/sysconfig/network-scripts/ifcfg-eth0 ? I tried to set GATEWAY=1.0.0.1 but it doesn't work. Tried to set GATEWAY and GATEWAYDEV in /etc/sysconfig/network and it does only what first command from listing above do.

    Read the article

  • WCF Communication Problem

    - by vincpa
    Two separate servers, one is an IIS7 web application trying to connect to a WCF service on the other server. The initial connect always fails, sometimes the second, after that, everything works normal. What could be the cause of this problem? The exception that gets thrown is EndpointNotFoundException Could not connect to net.tcp://192.168.0.83/MgrService/Manager.svc. The connection attempt lasted for a time span of 00:00:21.0289348. TCP error code 10060: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 192.168.0.83:808.

    Read the article

  • DNS and RPC Unavailable

    - by Berek Bryan
    I have a server that is host a MSSQL database and some other server related tasks. The server communicaties with a large number of devices. The devices send data to the server. The communication links are down between the devices on the intranet and to the outside world. However it seems I can ping and can be pinged from machines on the same switch. This includes the DNS Servers. When I run, C:\ipconfig /registerdns I get RPC Server is Unavailable. So, it seems that the server can not verify the DNS server. Both DNS server are up and running. No other machines are affected on the network.

    Read the article

  • IPTables masquerading with one NIC

    - by Tuinslak
    Hi, I am running an OpenVPN server with only one NIC. This is my current layout: public.ip > Cisco firewall > lan.ip > OpenVPN server lan.ip = 192.168.22.70 The Cisco firewall forwards the requests to the oVPN server, thus so far everything works and clients are able to connect. However, all clients connected should be able to access 3 networks: lan1: 192.168.200.0 (vpn lan) > tun0 lan2: 192.168.110.0 (office lan) > eth1 (gw 192.168.22.1) lan3: 192.168.22.0 (server lan) > eth1 (broadcast network) So tun0 is mapped to eth1. Iptables output: # iptables-save # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *filter :INPUT ACCEPT [327:26098] :FORWARD DROP [305:31700] :OUTPUT ACCEPT [291:27378] -A INPUT -i lo -j ACCEPT -A INPUT -i tun0 -j ACCEPT -A INPUT -i ! tun0 -p udp -m udp --dport 67 -j REJECT --reject-with icmp-port-unreachable -A INPUT -i ! tun0 -p udp -m udp --dport 53 -j REJECT --reject-with icmp-port-unreachable -A FORWARD -d 192.168.200.0/24 -i tun0 -j DROP -A FORWARD -s 192.168.200.0/24 -i tun0 -j ACCEPT -A FORWARD -d 192.168.200.0/24 -i eth1 -j ACCEPT COMMIT # Completed on Wed Feb 16 14:14:20 2011 # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *nat :PREROUTING ACCEPT [302:26000] :POSTROUTING ACCEPT [3:377] :OUTPUT ACCEPT [49:3885] -A POSTROUTING -o eth1 -j MASQUERADE COMMIT # Completed on Wed Feb 16 14:14:20 2011 Yet, clients are unable to ping any ip (including 192.168.200.1, which is the oVPN's IP) When the machine was directly connected to the internet, with 2 NICs, it was quite simply solved with masquerading and adding static routes in the oVPN client's config. However, as masquerading won't accept virtual interfaces (eth0:0, etc) I am unable to get masquerading to work again (and I'm not even sure whether I need virtual interfaces). Thanks. Edit: OpenVPN server: # ifconfig eth1 Link encap:Ethernet HWaddr ba:e6:64:ec:57:ac inet addr:192.168.22.70 Bcast:192.168.22.255 Mask:255.255.255.0 inet6 addr: fe80::b8e6:64ff:feec:57ac/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6857 errors:0 dropped:0 overruns:0 frame:0 TX packets:4044 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:584046 (570.3 KiB) TX bytes:473691 (462.5 KiB) Interrupt:14 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:33773 (32.9 KiB) TX bytes:33773 (32.9 KiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.1 P-t-P:192.168.200.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ifconfig on a client: # ifconfig eth0 Link encap:Ethernet HWaddr 00:22:64:71:11:56 inet addr:192.168.110.94 Bcast:192.168.110.255 Mask:255.255.255.0 inet6 addr: fe80::222:64ff:fe71:1156/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3466 errors:0 dropped:0 overruns:0 frame:0 TX packets:1838 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:997924 (974.5 KiB) TX bytes:332406 (324.6 KiB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:37847 errors:0 dropped:0 overruns:0 frame:0 TX packets:37847 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2922444 (2.7 MiB) TX bytes:2922444 (2.7 MiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.30 P-t-P:192.168.200.29 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:689 errors:0 dropped:18 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:468778 (457.7 KiB) wlan0 Link encap:Ethernet HWaddr 00:16:ea:db:ae:86 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:704699 errors:0 dropped:0 overruns:0 frame:0 TX packets:730176 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:520385963 (496.2 MiB) TX bytes:225210422 (214.7 MiB) static routes line at the end of the client's config (I've been playing around with the 192.168.200.0 -- (un)commenting to see if anything changes): route 192.168.200.0 255.255.255.0 route 192.168.110.0 255.255.255.0 route 192.168.22.0 255.255.255.0 route on a vpn client: # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.200.29 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 192.168.22.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.200.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.110.1 0.0.0.0 UG 0 0 0 eth0 edit: Weirdly enough, if I set push "redirect-gateway def1" in the server config, (and thus routes all traffic through VPN, which is not what I want), it seems to work.

    Read the article

  • Running PHP scripts as the owner of the PHP file: security issues

    - by thomasrutter
    I'm using suexec to ensure that PHP scripts (and other CGI/FastCGI apps) are run as the account holder associated with the relevant virtual host. This allows for securing each users' scripts from reading/writing by other users. However, it occurs to me that this opens up a different security hole. Previously, the web server ran as an unprivileged user, with read-only access to user's files (unless the user changed the file permissions for some reason). Now, the web user can also write to user's files. So while I've prevented different users taking advantage of each other's scripts, I've made it so that in the event that some application has a remote code injection vulnerability, it now has not only read access but also write access to all that user's scripts and website. How can I deal with this? One idea I've had is to create a second user account for each user account in the system, so that each user has their own user account, and all their scripts are run under another user account. But that seems cumbersome.

    Read the article

  • Limit HTTP VERBS on Apache2

    - by user72295
    I am trying to limit the use of certain HTTP verbs on my site. I entered the following into my VirtualHost config file within the Directory element: <Limit GET POST HEAD> Allow from all </Limit> <Limit PUT DELETE OPTIONS> Deny from all </Limit> This seemed to work but with unexpected results: I ran the following telnet/HTTP commands before and after this change, open server 80 OPTIONS server/abs_path HTTP/1.1 User-Agent: Telnet/1.0 Host: server before the change I received a successful response with the Allowed headers. After the change, however, I was expecting to receive a 405 'Method not allowed' response but rather I received a 403 'Access Forbidden' response. What do I need to change in apache to return the 405 HTTP response? Many thanks

    Read the article

  • shared web hosting architecture in a university setting

    - by gaspol
    We're in the process of creating a shared webhosting infrastructure for our university. Departments within the university can host their sites on this infrastructure. We're thinking of setting up multiple, load balanced web servers attached to shared storage (for web content and Apache config files). There will also be database servers behind these web servers. Does anyone have any other suggestions about this? Any recommendations for an alternative setup? Would having cPanel/WHM/Plesk be a good idea to automate account creation/maintenance?

    Read the article

  • I need a few minutes of dedicated server a week, but not for hosting, just to convert ogg etc.

    - by talkingnews
    I'm completely happy with my webhosting, it's just that I need to do one little thing they won't allow, and that's run an instance of Sox to convert about 30 mp3s to ogg files, in various directories, a couple of times a week, to be done automatically in response to the detection of the upload of an mp3. Probably looking at a minute of server time over the whole week. I've had unhelpful suggestions on other forums like "why not leave your home PC on 24 hours a day and then use all your isp bandwidth to do this", which doesn't work for me. I know that I can host files on, say, Amazon S3, but is there something similar for my needs? All it would need to do would be: wget/ftp the mp3 files, convert them to ogg, ftp the files back to my hosting. Of course, all this wouldn't be needed if there was such a thing as a compiled binary of Sox (or any mp3ogg converter) for Centos which I could upload without needing root access, but I've given up asking that one, but always open to suggestions!

    Read the article

< Previous Page | 334 335 336 337 338 339 340 341 342 343 344 345  | Next Page >