Search Results

Search found 19224 results on 769 pages for 'neural network tuning'.

Page 348/769 | < Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >

  • recent unreliable wireless connection on 10.04 and 10.10

    - by gabkdlly
    Recently, my internet connection over wireless has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista. The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. This problem does not seem to appear when I boot into Ubuntu 9.10 from a live CD ( more precisely, I was able to ping fu-berlin.de for an hour without any packet loss ). Under Ubuntu 10.10, I am experiencing about 33% packet loss. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow ( which happens often ) or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I have observed this problem with a Netgear KWGR614 Router ( with the manufacturers firmware ), as well as with a TP-LINK TL-WR741ND router running OpenWrt. Taking a look at my routers logs, I find many instances of the following line: Tuesday,04 Jan 2011 03:53:01 [TCP SYN Flood][Deny access policy matched, dropping packet] I know that the Netgear router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. I use WEP on the Netgear router and WPA on the TP-LINK to encrypt the wireless connections. Is it possible that someone is jamming my signal ?

    Read the article

  • Cannot schedule task to run under domain user account other than current user

    - by Filburt
    On our Win 2008 machines I can't schedule tasks for domain users because the domain name does not resolve to network name but the AD dc name. The "network name" looks like ABCDEFGE-HIJKLM and the "dc" / "name" would look like ABCDEFGE-HIJKLMN. When selecting the domain user account the account qualifier will look like ABCDEFGE-HIJKLMN\task.user. This results in an "invalid account" error. When however keeping the currently logged in user it will display ABCDEFGE-HIJKLM\current.user. Does this behaviour result from the presumable "illegal" domain name? Is there a workaround for this? update I could of course log in as the desired domain account and create the task but since this account is a account used for running services I want to avoid creating a user profile on the machine.

    Read the article

  • Is FreeBSD better than CentOS for firing 40k concurrent connections (for Jmeter)?

    - by blacklotus
    Hi, I am trying to run Jmeter to simulate 40k concurrent users and stress test a particular system. Putting aside the possibility that Jmeter may not be able to push such a high number (although I have read that it is at least possible to handle 10k concurrent threads on a very powerful machine), is FreeBSD a better OS as compare to CentOS to be used for my Jmeter machine? Reason for asking this is that, I have found articles on FreeBSD for tuning and optimizing for maximum outbound connections, but seem to have little luck with CentOS. Personally however, I am more familiar with CentOS and would like to stick with it if possible. Any input is greatly appreciated!

    Read the article

  • Connecting to a DLNA server in Vista's Media Centre

    - by Basic
    I've got a Windows 7 machine with a DLNA server set up. I can stream from it to my mobile and a number of other devices with no issues. All clients are auto-authorised so no permissions issues either. I have a Vista laptop on the network which I'd like to use to play back some of the videos. I can see the media server in the network view, if I double-click it, I can see the server in Windows Media Player. I can't find any way to add a DLNA source to Windows Media Centre, though. Where's the setting hidden?

    Read the article

  • Windows 7 PC refuses to join domain

    - by Alex
    So, we're wiping clean all PCs at our office and migrating them to a new server cluster and a new domain. Last night I tested on PC and it mostly worked except it refuses to join to the domain. Now, our domain is named like EXAMPLE.COM. When I just type EXAMPLE the PC can't find the domain controller, even though I can ping it find. If I type EXAMPLE.COM it seems to work. How can I get it to work with just EXAMPLE? That's how I got all the new servers int he cluster to work (about 20 of them) and I haven't had any issues... The only difference between the Windows 7 PC(s) and the servers is that the clients will be on a 10.0.3.X network where as the servers are on a 10.0.1.X network. Oh, the domain controller and all the other servers are Windows Server 2008 R2. Suggestions will be highly appreciated!

    Read the article

  • Cannot Boot, How to recover

    - by Kendor
    Am running 11.10 64-bit with Gnome-shell. Something happened late Friday whereby my machine never gets to the login screen. I do get to an Ubuntu splash logo, after that I get a text screen that it hangs on. The screen is referring to issues with mounting various network resources, including VMWare and also some references to my NAS that are in fstab. If I hit "esc" I can get to the GRUB menu and into recovery console. If I try to do a file system check, I run into a similar error screen that I see when trying to boot normally. A possible clue here is that during my last good session I made some mods to the /etc/hosts file to reference another system which I'm connecting to with Synergy. I don't believe I have hardware issues as I'm able to boot properly with a Live USB and connect to my network/Internet. A few more tidbits. I have regular Dejadups backups on my NAS. I have a good Clonezilla whole drive image which is 4-6 weeks old.. My home is encrypted. I thought I'd try blowing away my hosts file via live USB, but when I mounted the hard drive everything was read-only and I couldn't figure out how to replace it. P.S. I logged in via CLI and modded the host file to remove the entry I'd made, to no avail. System continue to gets stuck on the following: CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel version 3.1s Would love some sober advice on how to attack this.

    Read the article

  • Prevalence of WMI enabled in real Windows Server networks

    - by TripleAntigen
    Hi I would like to get opinions from systems administrators, on how common it is that WMI functionality is actually enabled in corporate networks. I am writing an enterprise network application that could benefit from the features of WMI, but I noted after creating a virtual network based on Server 2008 R2, that WMI seems to be disabled by default. Do systems admins in practical corporate networks enable WMI? Or is it usually disabled for security purposes? What is it used for if it is enabled? Thanks for any advice! MORE INFO: I should have said, I really need to be able to query the workstations but I understand that by default the WMI ports on Win7 and XP firewalls (at least) are disallowed, so do you use some sort of group policy or other method to leave a hole open for WMI on the workstations? Or is just the servers that are of interest? Thanks for the responses!!

    Read the article

  • Remote Access Without Explicit Permission: Convenience or Liability?

    - by routeNpingme
    For outsourced professional IT remote support, one habit most new technicians get into is the "instead of getting the user to start up remote support each time, I'll go ahead and install LogMeIn / GoToMyPC / Remote Desktop / whatever so that if they call again, I can just jump on and help them". This of course opens up a potential liability because a client PC on a network that we don't own is being accessed without a user explicitly providing permission by clicking a "Yes, allow technician to control my PC" option. I realize the rules totally change when you're an IT admin over a network that you "own", but this is outsourced IT support. Just curious what others' policies are. Is this an acceptable practice for convenience and I'm turning into one of those "security is more important than anything" people, or is this really a liability?

    Read the article

  • Superscope DHCP leases and configuration set up

    - by Vdub
    Hello I wanted to see if someone could help with a network problem I am having. Right now we have a super-scope and scopes of 192.168.50.1 and 192.168.51.1, as of now both are activated but only 192.168.50.1 is handing our leases, 192.168.51 wont. here is a summary of our network Gateway: watchguard firebox x750e for our router/gateway at 192.168.50.1 I set up as a secondary IP address 192.168.51.1 Server: Server 2008 r2 standard, running our DNS @ 192.168.50.242 and 8.8.8.8 as a secondary, AD, and DHCP. On that NIC card i have 192.168.50.242 as the IP address and 192.168.51.242 as a secondary. 192.168.50.1 as the default gateway and 192.168.51.1 as a secondary. Im am not very knowledgeable at this but as far as i have researched after adding a super scope and activating scopes, they should automatically start handing out addresses and I cant figure out why only one does. any help at all would be appreciated.

    Read the article

  • Routing using Linux with 2 NIC cards

    - by Kevin Parker
    Configured Clear OS to be in Gateway mode on a machine with two NIC cards. eth0:192.168.2.0/24 with ip 192.168.2.27 which is connected to a modem and thus have internet connectivity. eth1:192.168.122.0/24 with ip 192.168.122.10 which is connected to other machines in LAN through switch. LAN machines with network 192.168.122.0 is not getting internet.How can they get internet Through Clear OS gateway.I have enabled packet forwarding in clear os using "ip_forward=1" What am i missing?.Can you please help me in this. Following are the static routing i have added: on LAN machine1 with ip address 192.168.122.11 ip route add 192.168.2.0/24 via 192.168.122.10 dev eth0 ip route show 192.168.2.0/24 via 192.168.122.10 dev eth0 192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.11 But still 192.168.2.0/24 network is not reachable.Where can be the problem??

    Read the article

  • How to set my Ubuntu account to super user at all times?

    - by iaddesign
    I have the latest Ubuntu installed and I'll be the only one using it off the network. My question is: how can I make myself super user at all times? Because when I try to delete a file it says I don't have privileges to do so. I know you are going to say it's a security risk but I'm off the network and want to learn all that I can. I don't want to delete the files through the terminal but want to do it through the user interface/explorer. I've installed LAMP and can't copy my site to the www directory. I've tried to remove the preinstalled index file and it won't let me.

    Read the article

  • Configure IIS 6 to deny access to specific file based upon IP address

    - by victorferreira
    Hello guys, We are using IIS 6 as our webserver. And we need to deny the access for one specif file, placed in only one specific URL, to everybody OUTSIDE the local network. In other words, if somebody is trying to access that filme/page from their own computer at home, using the internet, they must not succeed. But, if the same person try to do that at the same network of the web server, its ok. I am not sure about that, but Apache uses ORDER DENY,ALLOW. You specify the URL, allow or deny to all or to a range of IP. Any suggestions? Thanks!

    Read the article

  • Process Improvement and the Data Professional

    - by BuckWoody
    Don’t be afraid of that title – I’m not talking about Six Sigma or anything super-formal here. In many organizations, there are more folks in other IT roles than in the Data Professional area. In other words, there are more developers, system administrators and so on than there are the “DBA” role. That means we often have more to do than the time we need to do it. And, oddly enough, the first thing that is sacrificed is process improvement – the little things we need to do to make the day go faster in the first place. Then we get even more behind, the work piles up and…well, you know all about that. Earlier I challenged you to find 10-30 minutes a day to study. Some folks wrote back and asked “where do I start”? Well, why not be super-efficient and combine that time with learning how to make yourself more efficient? Try out a new scripting language, learn a new tool that automates things or find out ways others have automated their systems. In general, find out what you’re doing and how, and then see if that can be improved. It’s kind of like doing a performance tuning gig on yourself! If you’re pressed for time, look for bite-sized articles (like the ones I’ve done here for PowerShell and SQL Server) that you can follow in a “serial” fashion. In a short time you’ll have a new set of knowledge you can use to make your day faster. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Server 2008 R2 Datacenter (and all other version) not detecting hardware

    - by Mitchell Skurnik
    I upgraded my ASUS KFN32-D SLI/SAS motherboard to the latest BIOS version and swapped out the 2 dual-core procs with 2 quad core procs. After installing Server 2008 Datacenter onto the system I noticed that it was not connected to the network. I open device manager and see no network adapters. I have to go up to View - Show hidden devices to even see the virtual WAN Miniport adapters. This problem happens in Vista and Windows 7 (all x64). What is even stranger is it all works in x86 mode. What in x64 could be causing windows to not even detect hardware that works in x86? Is the boot manager possibly the culprit?

    Read the article

  • Putting a Windows DC, Exchange in a DMZ

    - by blsub6
    I have one guy at my company telling me that I should put FF:TMG in between my main Internet-facing firewall (Cisco 5510) and put my Exchange server and DC on the internal network. I have another guy telling me that I should put the Exchange server and DC in a DMZ I don't particularly like the idea of having my mailboxes and DC's usernames/passwords in a DMZ and I think that Windows authentication would require me opening up so many ports between my DMZ and my internal network that it would be a moot point to have it out there anyways. What are some thoughts? How do you have it set up?

    Read the article

  • Can only access asp.net app on localhost

    - by Kevin Donn
    I'm trying to get an asp.net application up on IIS on a Windows Server 2008 machine. I can hit the app from localhost, no problem. But I can't access the app using the server's domain name either locally or from another machine on the network. But here's the odd part. I can access a normal file on IIS using the domain name, both from a browser running on the server and from a browser running on another machine on the network. Here's a synopsis ("http" converted to "htp" below because I don't have enough points to have all these links in my message): From IE on the server itself: works htp://localhost/foo.htm works htp://localhost/App works htp://test.foo.com/foo.htm dead htp://test.foo.com/App From IE on another machine (inside or outside my subnet): works htp://test.foo.com/foo.htm dead htp://test.foo.com/App And when I say "dead" I mean the request times out. Any ideas?

    Read the article

  • Web Filter For Multiple Networks

    - by Rob
    I have been using a Barracuda web filter 310 in our network and I have just had enough of it. It does not support trunking and we have several networks that have users that need to be web filtered. (I guess if everyone just did their flippin jobs I would not have this issue) but the management wants me to get it resolved. Does anyone know the top five web filters that are better than the barracuda web filters that support network trunking so that I can have multiple domains and subnets going through it? Thanks in advance - everyone on this site is gold in my book!

    Read the article

  • What is fastest way to backup a disk image over LAN?

    - by David Balažic
    Sometimes I boot sysrescd or a similar live linux on a PC to backup the hardrive over local network to my server. I noticed many times, that the transfer speed is not optimal (slower than HDD and network speed). Any rules of thumb what to do and what to avoid? What I typically do is something like: dd bs=16M if=/dev/sda | nc ... # on client nc ... | dd bs=16M of=/destination/disk/backup1 # on server I also "throw" in lzop (other are way too slow) and sometimes on the fly md5sum calculation (both of uncompressed and compress source). I try to add (m)buffer (or other alternatives) to improve throughput (and get a progress indicator). I noticed that even with enough free CPU, adding commands to the pipeline slows things down. Typically the destination is on a NTFS volume (accessed via ntfs-3g, with the _big_writes_ option).

    Read the article

  • HP Envy dv6t-7300: Disabled WiFi through button and can't enable it anymore

    - by Mateus B. Cassiano
    Well, I have a HP Envy dv6t-7300 laptop that came with a Ralink RT5390 WiFi card. Everything was working perfectly, and eventually I press the WiFi button in my keyboard to toggle the card on/off. Until today, all worked right: if the wifi was off (wifi LED amber) and I press the wifi button, after a few seconds the LED turn white and everything works. If I repeat the process, the wifi LED turn amber and the card get disabled, but now, I can't turn it on anymore. running sudo rfkill list all I get: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes So, I ran sudo rfkill unblock all but nothing changed. As a side note, if I run sudo ifconfig wlan0 up, the indicator LED gets white (indicating that the card was enabled), but Ubuntu still say that the card is blocked by hardware. Extra information: the card works without issues in windows and in Ubuntu installer (booting from a live CD). I'm using the card out-of-box, using the drivers already included in Ubuntu 12.10. The module rt2800pci is loaded and working fine, not blacklisted, etc, etc. The card and the button toggle worked flawlessly until today, when I toggled it off and can't turn it on anymore... The problem is back, but in a different manner: if I don't press the wifi key a few times during the grub loading, in the login screen the wifi button will be ambar (disabled), pressing it will toggle it white (enabled) or ambar (disabled) again, but ubuntu still says that the network card was disabled by hardware and doesn't connect... In other words, if I don't press the WiFi button a few times when Ubuntu is booting, it will be stuck with the "network card was disabled by hardware" message, even if the light is white (enabled). Any clue? Maybe a error in some startup script or config file?

    Read the article

  • Additional new material WebLogic Community 2013

    - by JuergenKress
    Load Balancing T3 Initial Context Retrieval for WebLogic using Oracle Traffic Director Demystifying WebLogic and Fusion Middleware Management WebLogic Server- Integrated & Optimized w/ Best of Breed Oracle Offerings to Turbo Charge your Applications Get a Bird’s-Eye View of IT Architecture: IT Strategies from Oracle IT Strategies from Oracle, a complimentary authorized library of guidelines and reference architectures, can help you put together a strong IT architecture that takes into account individual technology components as well as big-picture IT concepts and strategies. Read More. Deploying Oracle Application Development Framework Applications on Oracle Java Cloud Service and Oracle Database Cloud Service With the new Oracle Cloud environment you no longer have to maintain an Oracle WebLogic server or a database server of your own – you can instead use instances hosted on Oracle Cloud. More Oracle Application Development Framework Development with Eclipse Oracle Enterprise Pack for Eclipse now provides even more Oracle Application Development Framework tooling with each release. Check out this new tutorial on Oracle Enterprise Pack for Eclipse 12.1.1.2. Oracle WebLogic Devcast Series Join us for the March 28 Oracle WebLogic Devcast Webcast, “What to Expect from Maven on Oracle WebLogic,” featuring Pyounguk Cho, Oracle’s principal product manager. Learn what developers can expect when utilizing Apache Maven with Oracle WebLogic. Customer Webcasts: WebLogic Devcast Series – Register Leveraging Third-Party Libraries to Create and Deploy Applications to Oracle Cloud Oracle ADF: Tuning Application Module Pools and Connection Pools WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • unreachable subnet in one direction

    - by Carl Michaud
    I'm unable to route traffic to a subnet in my home. Here's my topology: INET <- Router A <- Router B <- WIFI AP where: Router A - ARRIS TG862G/CT (from comcast) - WAN DHCP, LAN 10.0.0.99 Router B - Linksys WRT400N with DD-WRT - WAN 10.0.0.12 , LAN 10.0.1.1 I was able to use DD-WRT to configure a static route for the 10.0.1.x network back to the 10.0.0.x network. But I'm not sure if i can do the reverse on the ARRIS router and was looking for suggestions on how to fix that. I've set things up this wasy because I am using OpenDNS to mange internet content for my kids and of course I wasn't able to configure DNS to my liking on Router A either. So at present I'm using Router A on 10.0.0.x to provide a private unfiltered WIFI AP (no ssid broadcast) that I use for netflix only and then I use router B to provide a filtered WIFI AP for the rest of my WIFI devices on 10.0.1.x. However I would like to be able to connect to my 10.0.1.x devices from the internet via dynamic dns; but I can't see anything behind router B this way. Thoughts?

    Read the article

  • How to represent a graph with multiple edges allowed between nodes and edges that can selectively disappear

    - by Pops
    I'm trying to figure out what sort of data structure to use for modeling some hypothetical, idealized network usage. In my scenario, a number of users who are hostile to each other are all trying to form networks of computers where all potential connections are known. The computers that one user needs to connect may not be the same as the ones another user needs to connect, though; user 1 might need to connect computers A, B and D while user 2 might need to connect computers B, C and E. Image generated with the help of NCTM Graph Creator I think the core of this is going to be an undirected cyclic graph, with nodes representing computers and edges representing Ethernet cables. However, due to the nature of the scenario, there are a few uncommon features that rule out adjacency lists and adjacency matrices (at least, without non-trivial modifications): edges can become restricted-use; that is, if one user acquires a given network connection, no other user may use that connection in the example, the green user cannot possibly connect to computer A, but the red user has connected B to E despite not having a direct link between them in some cases, a given pair of nodes will be connected by more than one edge in the example, there are two independent cables running from D to E, so the green and blue users were both able to connect those machines directly; however, red can no longer make such a connection if two computers are connected by more than one cable, each user may own no more than one of those cables I'll need to do several operations on this graph, such as: determining whether any particular pair of computers is connected for a given user identifying the optimal path for a given user to connect target computers identifying the highest-latency computer connection for a given user (i.e. longest path without branching) My first thought was to simply create a collection of all of the edges, but that's terrible for searching. The best thing I can think to do now is to modify an adjacency list so that each item in the list contains not only the edge length but also its cost and current owner. Is this a sensible approach? Assuming space is not a concern, would it be reasonable to create multiple copies of the graph (one for each user) rather than a single graph?

    Read the article

  • LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

    - by Peter Mounce
    I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

    Read the article

  • WebLogic 12c training in Dutch–May 10th & 11th 2012 Utrecht Netherlands

    - by JuergenKress
    Axis into ICT offers you the opportunity to increase your skills. We are organizing ‘Bring Your Own Laptop Knowledge Sessions‘. In a small group of up to 8 people we are going discuss all the practical aspects of WebLogic Server you ever wanted to know. This is not a standard course, but a training where applying the material in practice is of importance. All participants will receive their own virtual machine, which offers you to ability to continue afterwards with your own practice environment. By keeping the groups small we create an informal atmosphere with plenty of room for all your questions or to even discuss your specific situation. The approach is highly interactive; after all you are attending to increase your knowledge. Topics that will be covered Introduction JVM Tuning Deployment Diagnostic Framework Class Loading Security Configure Resources Clustering Scripting Register for this session You are interested in the ‘Bring Your Own Laptop Knowledge Sessions: WebLogic 12c’? Register for one of two possibilities by using the form below. After registration you will receive a confirmation by e-mail. Training will be in Dutch! Date: May 10 & 11 2012 from 09:30 – 17:00 hrs Location: Axis into ICT Headquarters (Utrecht) Expenses: € 700,- per person (VAT excluded) For registration and details please visit our website. Want to promote your event? Let us know Twitter @wlscommunity! WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Axis,education,WebLogic training,WebLogic,WebLogic Community,OPN,Oracle,Jürgen Kress,WebLogic 12c

    Read the article

  • how to debug mysql has gone?

    - by fefe
    I have a virtual machine(Ubuntu 12.04, MySQL 5.5) running under VMware and is dedicated to host a mysql server. I connect to this server on internal IP. I'm trying to find out why I get mysql server has gone error. One my windows machines apache it stops because of this issue. I have been trying to fine tune my mysql my.cnf with the following parameters but did not bring the desired result. # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 0.0.0.0 # # * Fine Tuning # wait_timeout = 180 key_buffer = 384M max_allowed_packet = 64M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 500 table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 32M how to debug this issue what is missing from configuration to avoid this error?

    Read the article

< Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >