Search Results

Search found 19224 results on 769 pages for 'neural network tuning'.

Page 351/769 | < Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >

  • Quickbooks and Cisco ASA 5505

    - by user41516
    I have a Cisco ASA 5505, and everything has seemed to function fine, however I have had problems with Quickbooks 2008 running super slow over the network (Samba) and narrowed it down to the Cisco box. Other Samba transfers seem to be pretty fast, and the Quickbooks file is not very large at all (<25 MB), and other Samba transfers seem to be fine. However, I'm not sure if Quickbooks uses another protocol or if there are other ports that need to be opened. Can anybody give me any clues on how to resolve or troubleshoot the problem or have any prior experience with running Quickbooks over a network?

    Read the article

  • Slow upload to Server 2008 DC, Downloads work as expected

    - by Anthony
    I have a Windows Server 2008 Domain Controller that I run as a do-it-all server. It has a GbE connection to the network and to every machine on the network. Downloads from the server file shares work as expected, between 70MB/s and 80MB/s to all the machines. However, when I try to copy files back up to the server, speeds fall to 7MB/s-10MB/s. I've disabled flow control and large send offload properties on all the NICs. I had this problem before and managed to fix it through some properties changes, but like an idiot, I never documented my fix and have since moved to a new server. Any ideas what I need to do to get the speeds to be more symmetric? EDIT: Remote differential compression is also disabled.

    Read the article

  • How can I perform a ping every X minuts and check the response time?

    - by Profete162
    I am currently working in a big company and we have serious latency issues. This is happening in a process control system, and is unacceptable (Open a valve sometimes take 2 minuts before command start) The Network team seems very lazy and I want to check when they say "everything alright on the network". So, I want to create a loop that ping the server and write the result in a text file. I am not a batch expert, but do you think this code is correct to use? @ECHO OFF :LOOPSTART time /T ping xxx.xx.x.x -t >> filename.txt sleep -m 3000 GOTO LOOPSTART

    Read the article

  • Win 7: Share internet connection via Ethernet and WiFi

    - by Anvaka
    I have the following configuration: Box 1. Running Win 7, connected to the internet via Eth0. Has one wireless network adapter and one more ethernet adapter (say, Eth1). Box 2. Running Win XP, has one ethernet adapter. I'd like to share Internet connection of the Box 1 with Box 2 via cable and have box 1 also sharing the Internet with other wireless devices. I don't want to buy any additional hardware. Is it possible? PS: Sorry if I'm unclear. I merely know nothing about NAT and network administration

    Read the article

  • Cross-platform automatic adhoc wifi?

    - by marienbad
    I'm not very knowledgeable about wifi, but I understand the notion of Adhoc networks (Wifi without a router), so... Is there a standard (or widely implemented) way of letting a device "momentarily" negotiate a wifi connection (Adhoc network or otherwise) directly to another device, transfer some data, and then quit, all without any user intervention on either device? For example, let's say I have a PC and an ereader in the same room and there's no nearby wifi router for either of these devices to connect to. I want to send a file from PC to ereader but I don't want to do the work of setting up network, selecting an SSID, or entering passwords. Is that possible?

    Read the article

  • Internet slow on one router only [the problem only in Ubuntu] [on hold]

    - by mrSuperEvening
    Internet works perfectly on every other router, but browsing sucks at home (slow browsing and slow loading times). I changed DNS servers to 8.8.0.0, still doesn't help. And funnily, download speed is extremely high on this network (meaning torrents for example), but using browsers and loading websites is extremely slow (only on this network). Do I need to change something in router settings or what can I try? By the way, I use wired connection to router. EDIT: There's no problems when using Windows. EDIT: ifconfig: eth0 Link encap:Ethernet HWaddr f2:4d:a0:c0:3f:4c inet addr:192.168.11.8 Bcast:192.168.11.255 Mask:255.255.255.0 inet6 addr: fe80::f24d:a2ff:fec6:3f4c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:206798 errors:0 dropped:0 overruns:0 frame:0 TX packets:219570 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:76680734 (76.6 MB) TX bytes:21738160 (21.7 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:160 errors:0 dropped:0 overruns:0 frame:0 TX packets:160 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:11094 (11.0 KB) TX bytes:11094 (11.0 KB)` ping -c 2 4.2.2.2 PING 4.2.2.2 (4.2.2.2) 56(84) bytes of data. --- 4.2.2.2 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms ping -c 2 google.com PING google.com (213.159.32.147) 56(84) bytes of data. 64 bytes from lan-213-159-32-147.kns.skynet.lv (213.159.32.147): icmp_seq=1 ttl=61 time=0.936 ms 64 bytes from lan-213-159-32-147.kns.skynet.lv (213.159.32.147): icmp_seq=2 ttl=61 time=0.937 ms --- google.com ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1001ms rtt min/avg/max/mdev = 0.936/0.936/0.937/0.030 ms

    Read the article

  • Win 7: Share internet connection via Ethernet and WiFi

    - by Anvaka
    I have the following configuration: Box 1. Running Win 7, connected to the Internet via Eth0. Has one wireless network adapter and one another ethernet adapter (say, Eth1). Box 2. Running Win XP, has one ethernet adapter. I'd like to share Internet connection of the Box 1 with Box 2 via cable and have box 1 also sharing the Internet with other wireless devices. I don't want to buy any additional hardware. Is it possible? PS: Sorry if I'm unclear. I merely know nothing about NAT and network administration.

    Read the article

  • Rsync like windows backup tool

    - by Halfgaar
    I need to backup some windows machines and have been unable to find the proper tool. What I need is a tool that does efficient copying of changed files to a windows network location, like Rsync does. In turn, the server will then back that up using rdiff-backup, a tool which does very clever incremental backups. Right now I'm using windows' 7 included backup feature, but I really don't get that. It's too much off-topic, but it doesn't suffice (seems buggy as well). I looked into Amanda, but as soon as it wanted to install MySQL, I aborted. I also tried Deltacopy, but unfortunately, I don't remember what the problem with that was... Any advice for an rsync like tool that just does daily syncs to a network location?

    Read the article

  • Sharepoint 2010 web front end servers and services configuration

    - by Yash
    I have a sharepoint insfrastructure where a document library is made available both locally and on the internet. I have a few web front end servers facing the public (in the DMZ) while having another set inside the secured network for internal use. I also have an application server for sharepoint services inside the secured network. My goal is to configure sharepoint in such a way that the sharepoint services are available only locally and not via the internet. The users accessing the system online should not benefit of the sharepoint services. Is this possible on the same farm?

    Read the article

  • Windows Server 2003: Router, DHCP, Looses internet connection

    - by jM2.me
    I have following setup: a windows server 2003 dedicated server with tho nics. One is connected to internet (no modem/router), and second one is connected to private network. Server has DHCP server installed on it and internet nic is being shared for internet access. The problem is sometimes server looses connection to the internet, so same happens to private network. So far I can manually fix it by releasing and renewing IP address. What could be the cause of this problem? DHCP lease from ISP? Thanks

    Read the article

  • Routers with USB plug to connect external storage

    - by sixtyfootersdude
    I am just about to buy a new wireless router. I want to be able to hook up a harddrive to it and let the harddrive serve the entire network. I will mostly be storing media and some backups on the drive. I know I could get some kind of NAS but I would prefer to just hook up one of my many unused hard drives directly to my router. It looks like d-link has several products that do this using shareport. If you were wanting to have network storage how would you do it? With a NAS? Using a router with a USB port. Are these systems robust? What router would you buy?

    Read the article

  • Getting VPN to work from Virtual PC

    - by strobaek
    Setup: Host is running Windows7. Virtual PC is a Windows Server 2008 running under VMWare workstation 6.5. From the Host I have a VPN to e.g. TFS and other resources. From the VPC I need to connect to e.g. a SQL server via the VPN. My problem is, that I cannot get a connection from the VPC. If I'm sitting on the corporate network, all is working fine (but then I don't have the VPN). From home - where the VPN is required - it does not work. I have two network adapters defined/configued. One as BRIDGED and one as Host Only. IF I change the one being BRIDTED to NATS I have no connectivity at all from the VPC. I have no problems connecting from my host to the VPC. Thanks.

    Read the article

  • Windows 7 - Home Drive Map Fails

    - by Ed Fries
    Server 2003 SP2 (not R2) with 2 new Win 7 Pro workstations. Home Drive is set in AD (not GP) to map to \\server\users\username. Home Drive map fails, other network drives map correctly. No error logged on server or PC, Win 7 shows "Could not reconnect all network drives." There is no Y: (Home Drive) listed, either in the GUI or via Net Use. Manual map via batch file in startup group with the same path works correctly? Home Drive map works correctly on XP workstations.

    Read the article

  • Windows 2003 server RRAS on VPC

    - by Saif
    I'm trying to setup a L2TP VPN server(to give user access on to all my VPN instance) on a Windows 2003 instance running on my VPC. While trying to enable RRAS I'm getting error, "less than two network interfaces were detected on this machine". Eventually it's because there's only one network interface available, the which has private IP. I have elastic IP assigned to this instance as well. But RRAS can't see this. What should I do to RRAS to be able to see the interface with elastic IP?

    Read the article

  • Sonicwall Global VPN Client fails to connect, despite successful connections from other computers from behind the same router

    - by JesperE
    I've recently been unable to connect to our Sonicwall VPN at work. The Sonicwall client is stuck on "connecting", and the log says "The peer is not responding to phase1 ISAKMP requests". The weird thing is that this is not an issue with my own PC, only my work laptop (Lenovo W530 running Windows 7 64-bit), and this has only appeared recently. This ought to rule out any problems with my ISP blocking VPN, or issues with the router itself. My company's IT department says that they cannot see anything in their logs when I'm trying to connect. My conclusion is that something is wrong on the laptop itself. Disabling the firewall does not help. Can the VPN connection be blocked in other ways? What should I be looking for? EDIT: This problem has "magically" disappeared, without any changes done in my network. I can only assume that this was caused by some network glitch with my ISP.

    Read the article

  • How to configure something like "Reflexive ACL" on OpenBSD?

    - by Earlz
    My U-Verse modem has something called "Reflexive ACL" described as Reflexive ACL: When IPv6 is enabled, you can enable Reflexive Access Control Lists to deny inbound IPv6 traffic unless this traffic results from returning outgoing packets (except as configured through firewall rules). This seems like a pretty good way to keep from having to maintain a firewall on each computer behind my router that gets handed an IPv6 address. It sounds about like a NAT, which for my small home network is all I want right now. Now my modem sucks as a router though, so I'm in the process of configuring an OpenBSD router to do that. I've got IPv6 supported and all that and my OpenBSD router will hand out IPv6 addresses by rtadvd. Now I want to keep people from having instant access to my local network through IPv6. How would I best do something like Reflexive ACL with pf in OpenBSD 5.0?

    Read the article

  • servers connected to a poweredge 6248 receive traffic for their 'neighbours'

    - by Hannes
    In the network we have a few vlans but at the moment I was investigating vlan2 which carries the most traffic. When tcpdumping on the eth0.2 interface, I see a lot of packets arriving which are not addressed to, nor coming from the server. I checked this on several servers in the network and they all have the same issues. In short, our switches don't switch the traffic but threat it like they are a hub. Can you tell me what settings on the dell poweredge 6248 should prevent this behaviour?

    Read the article

  • Manually forcing TCP connection to retry

    - by Vi.
    I have a TCP connection (SSH session to some computer for example) Network suddenly goes down and drops all packets (disconnected cable, out of range). TCP resends packets again and again, retrying with increasing delays. I see the problem and plug the cable back (or restore network somehow). TCP connection finally successfully resends some packet and continues. The problem is that I need to wait for a some timeout on point 5. I want to use my opened SSH session now and not wait for 5-10 seconds until it finds out that connection is working again. How to force all TCP connections to resend data without delays in GNU/Linux?

    Read the article

  • isolate web servers on intranet with dfl-800

    - by microchasm
    I administer a small network (10 users). I'm getting ready to deploy a internal webapp that will be hosted and accessed locally only. There are about 10 users on the network (192.168.111.0/24), a win2k3 server, apache (RHEL), and Mysql (RHEL), and various miscellaneous peripheries. I'd like to isolate the apache and sql boxes into a seperate area of the lan to keep things easier to maintain/grow. I've been reading about vlans, subnets, etc.. I'm not clear, however, which would be the best solution for our setup. Thanks for any tips and or advice.

    Read the article

  • how to connect virtual box os and local machine

    - by soul
    This question is in connection to this question asked by a user before: http://superuser.com/questions/73470/virtualbox-vdi-file-to-vmware On how to convert vdi to vmdk or vmx using vmware converter. How do I connect the windows xp that is in virtual box to the local computer (windows 7) in a network. Because I got this error while I tried following this instruction: Give the IP address, username and password of the remote machine that you would like to convert and then hit next I got this error in vmware converter: Unable to connect the specified host 10.0.2.15 which is the ip address of the xp machine inside virtual box. It also said that there is a network configuration problem. And when I inputted the ip address from whatismyip.com which should be the same as the ip address on local machine. I didn't get the previous error but I got another one, it said that: insufficient permissions to connect to "ip address" What solution can you suggest for this problem?

    Read the article

  • Can connect to WAN via PC but router doesnt.

    - by user16877
    I have a very strange problem regarding the office network. We are currenltly in a executive suite and when i connect to wan via ethernet cable i get dhcp assigned IP address in my network config. I hooked up the linksys router to the wall expecting it to receive all the necessary ip info but that didnt work. So we have been assigned static ip address to put in to our router later but even with the static ip router doesnt seem to connect to internet. But using the same ip address and assigning to laptop works. I m very puzzled what might be the cause of this so any help is really appreciated.

    Read the article

  • eSTEP Newsletter for the technical EMEA partner community

    - by mseika
    We are pleased to present to you the first issue of the eSTEP Newsletter, which is dedicated to support the technical EMEA partner community in the effort to provide more information on what is going on within the corporation, what is the technical news regarding Hardware, events and all the important things which we think may be of interest to you. Invitation: STEP TechCast: Oracle Solaris 11 Express Get an insight on how Oracle Solaris 11 Express has raised the bar on the innovation introduced in Oracle Solaris 10. Learn about the new integrated features such as: network based package management tools improvements to built-in virtualization new virtualised network architecture security enhancements file system evolution  Learn how Oracle Solaris 11 Express provides greatly decreased planned system downtime, performs a completely safe system upgrade, achieves an unprecedented level of flexibility for application consolidation, and provides the highest levels of security in your datacenter. Date and time: Thursday, 7. July 2011, 13:00 - 14:00 CEST Speaker: Joost Pronk van Hoogeveen Target audience: Tech Presales Webcast Coordinates: You will find the coordinates in the eSTEP portal under the Events tab. Use your email-adress and PIN: eSTEP_2011 to get access. We are happy to get your comments and feedback.

    Read the article

  • Distribute Nagios to reduce false alarms

    - by GDR
    I'm currently running a single Nagios instance. From time to time, I'm getting false alarms about timeouts - for example, it says that HTTP is down on some server, but when I open it in my browser several seconds later, it loads fast, and in general there is no trace of an error. What can I do to reduce such false alarms? I'm guessing that it's because of transient network issues on my monitoring server. I guess that setting up another monitoring server on a different network would greatly help, but how do I plug it into Nagios? Is it at all possible with Nagios or do I have to switch to another monitoring system? I like my configs and, if possible, I'd like to stay with Nagios or something compatible (Icinga?)

    Read the article

  • PASS Summit Preconference and Sessions

    - by Davide Mauri
    I’m very pleased to announce that I’ll be delivering a Pre-Conference at PASS Summit 2012. I’ll speak about Business Intelligence again (as I did in 2010) but this time I’ll focus only on Data Warehouse, since it’s big topic even alone. I’ll discuss not only what is a Data Warehouse, how it can be modeled and built, but also how it’s development can be approached using and Agile approach, bringing the experience I gathered in this field. Building the Agile Data Warehouse with SQL Server 2012 http://www.sqlpass.org/summit/2012/Sessions/SessionDetails.aspx?sid=2821 I’m sure you’ll like it, especially if you’re starting to create a BI Solution and you’re wondering what is a Data Warehouse, if it is still useful nowadays that everyone talks about Self-Service BI and In-Memory databases, and what’s the correct path to follow in order to have a successful project up and running. Beside this Preconference, I’ll also deliver a regular session, this time related to database administration, monitoring and tuning: DMVs: Power in Your Hands http://www.sqlpass.org/summit/2012/Sessions/SessionDetails.aspx?sid=3204 Here we’ll dive into the most useful DMVs, so that you’ll see how that can help in everyday management in order to discover, understand and optimze you SQL Server installation, from the server itself to the single query. See you there!!!!!

    Read the article

  • Remote desktop to multiple windows machines on a LAN with dynamic IP

    - by kevyn
    Is it possible to use remote desktop to connect to multiple computers inside a network that has a dynamic IP address? I use a netgear WPN824 router which has dyndns onboard - but I currently use No-IP to control a single computer that I use most frequently. Every so often I need to get onto a couple of other computers in the network, but don't know how to go about this without logging onto one computer, and then starting another RDC session from that machine. What I would like to be able to do is connect to my router, and be able to see a list of connected devices, and then choose which to remote desktop onto. - I appreciate this probably is not be possible, but any other suggestions are welcome!

    Read the article

< Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >