Search Results

Search found 11608 results on 465 pages for 'usb extension'.

Page 348/465 | < Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >

• Wireless connected but internet not working, modem is fine because I'm typing over wifi on my android

  - by Sandro Livaja

  I can't connect to the Internet in 11.10. I tried switching my wifi card to another USB slot but nothing changed. Is it possible that the card is able to connect while not being able to receive packages? $ ifconfig eth0 Link encap:Ethernet HWaddr 40:61:86:35:11:b0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 Base address:0x6000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 74:ea:3a:8c:d5:5c inet addr:192.168.2.5 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::76ea:3aff:fe8c:d55c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:102 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1209 (1.2 KB) TX bytes:15329 (15.3 KB)

  Read the article

• How to host an AP or a hotspot?

  - by user1048138

  I'm running Ubuntu 12.04 as a virtual machine on my Mac. Since I am unable to get the virtual machine to have full access to my WiFi card, I bought another USB WiFi card to use. This is my WiFi card. If you are unfamiliar with Virtual machine, as far as I know, since the Ubuntu has its own card now, it shouldn't matter. I have followed these guides with no luck: https://help.ubuntu.com/community/WifiDocs/WirelessAccessPoint http://www.danbishop.org/2011/12/11/using-hostapd-to-add-wireless-access-point-capabilities-to-an-ubuntu-server/ The problem is that the WiFi connection appears on all of the machines that I have in my house: 2 iPhones, Dell machine running Ubuntu and two Macbooks. However the connection times out on all of these machines. Questions: Could this be a driver issue if that same WiFi card can connect to other WiFi points and use its internet Could this be DHCP related? I would think not. It should at least get a 169.X.X.X address? No? Any solutions for me?

  Read the article

• recent unreliable wireless connection

  - by gabkdlly

  Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I have observed this problem with a Netgear KWGR614 Router ( with the manufacturers firmware ), as well as with a TP-LINK TL-WR741ND router running OpenWrt. Taking a look at my routers logs, I find many instances of the following line: Tuesday,04 Jan 2011 03:53:01 [TCP SYN Flood][Deny access policy matched, dropping packet] I know that the Netgear router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. I use WEP or WPA to encrypt the wireless network. Is it possible that someone is jamming my signal ?

  Read the article

• How do I fix a terrible system error on ubuntu 12.04

  - by Anonymous

  I don't know what happened, but one day my computer had some sort of a system error and could no longer update itself. The software center will not open, it will begin to initialize and then a message pops up saying theres a system error and needs to shut down the software center. Then another box pops up after I go to report it saying it was unable to identify source or package name. I also can't extract a zipped folder to anything, or reinstall Ubuntu from a USB boot drive anymore, it keeps telling me my my computer isn't compatible when I know for a fact it is, because thats how I got Ubuntu on here in the first place. the only thing I know about this error is that a message popped up after I went to check for updates saying to report the problem and include this message in the report: 'E:malformed line 56 in source list /etc/apt/sources.list (dist parse)' it also called it a bug. I just want to know how to either get rid of the bug completely or find some way to be able to reinstall Ubuntu again. I know it's not a lot of information, but It's all I can give. Sorry.

  Read the article

• Accessing second hard drive

  - by Jonathan

  So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris @djeykib So very close to fixing it.. unfortunately on the last command you gave it says this: $ sudo apt-get install linux-lts-backport-natty Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-lts-backport-natty Checking on http://www.ubuntuupdates.org/ppas reveals that it is only available for 10.04. Looks like I'll have to unplug and re-plug hardware if I want it working still :(

  Read the article

• 12.10 install overwrote my windows partition

  - by Niall C

  Recently decided to switch back to Ubuntu. I have a 3TB drive which was running win7. I had 3 partitions. c: for windows d: data e: data Have installed ubuntu before so 'thought' I knew what I was doing. I using netbootin I installed from a usb stick. I didn't choose the default options but I didn't choose the 'manual install' either. I can't remember what option I took but I figured at some stage it would tell me how it was going to partition the disk and at that stage I would see if it had recognised the NTFS partitions and I would be able to abort if it didn't. Unfortunately, it didn't and just went ahead and installed Ubuntu and made up it's own mind on how it was going to partition the disk. Usual story, the two NTFS data partitions weren't backed up. Is there anything I can do to retrieve the ntfs data? I'm currently trying out testdisk and I know I can use photodisk to retrieve certain file types but all the filenames will be lost and it's going to take a hell of a lot of time to rename them all. Any help or assistance would be more than gratefully accepted. Thanks in advance, Niall

  Read the article

• X won't start, root filesystem mounted read only

  - by TK Kocheran

  I just experienced a very strange and puzzling problem on my machine that I can't seem to get sorted out. I was running Windows on a second partition, and everything was working great. I then went to restart into Linux, and noticed that X wouldn't start. Everything was displayed in super-low resolution, so I tried reinstalling my NVIDIA driver. I started seeing all of these I/O error problems, so I figured that my SSD was bad. After a bit more playing around, I ran fsck on the drive when mounted from a startup disk as well as badsectors and everything looked great. The SMART drive tests all passed and again, everything was looking good, so I rebooted again and still, no joy. I started then getting some weird USB errors, so I followed someone's advice and unplugged my computer's power supply, then started back up again and my graphics looked a lot better in the BIOS and in the boot logo, but X still wouldn't start. I then found out that my main boot drive was being mounted read-only for some reason. What's going wrong? I've done some pretty extensive tests on the SSD from a startup disk such as writing massive files, reading big files, running filesystem checks on the entire disk, and everything is looking great, until I try to boot. Whenever I try installing the drivers with apt-get, I get a ton of ata error messages looking like this: How can I diagnose what's going wrong and fix it so I can get back to work?

  Read the article

• WCF REST Error Handler

  - by Elton Stoneman

  I’ve put up on GitHub a sample WCF error handler for REST services, which returns proper HTTP status codes in response to service errors.   The code is very simple – a ServiceBehavior implementation which can be specified in config to tag the RestErrorHandler to a service. Any uncaught exceptions will be routed to the error handler, which sets the HTTP status code and description in the response, based on the type of exception.   The sample defines a ClientException which can be thrown in code to indicate a problem with the client’s request, and the response will be a status 400 with a friendly error message:       throw new ClientException("Invalid userId. Must be provided as a positive integer");   - responds:   Request URL http://localhost/Sixeyed.WcfRestErrorHandler.Sample/ErrorProneService.svc/lastLogin?userId=xyz   Error Status Code: 400, Description: Invalid userId. Must be provided as a positive integer   Any other uncaught exceptions are hidden from the client. The full details are logged with a GUID to identify the error, and the response to the client is a status 500 with a generic message giving them the GUID to follow up on:       var iUserId = 0;     var dbz = 1 / iUserId;   - logs the divide-by-zero error and responds:   Request URL http://localhost/Sixeyed.WcfRestErrorHandler.Sample/ErrorProneService.svc/dbz     Error Status Code: 500, Description: Something has gone wrong. Please contact our support team with helpdesk ID: C9C5A968-4AEA-48C7-B90A-DEC986F80DA5   The sample demonstrates two techniques for building the response. For client exceptions, a friendly HTML response is sent in the body as well as the status code and description. Personally I prefer not to do that – it doesn’t make sense to get a 400 error and find text/html when you’re expecting application/json, but it’s easy to do if that’s the functionality you want. The other option is to send an empty response, which the sample does with server exceptions.   The obvious extension is to have multiple exceptions representing all the status codes you want to provide, then your code is as simple as throwing the relevant exception – UnauthorizedException, ForbiddenExeption, NotImplementedException etc – anywhere in the stack, and it will be handled nicely.

  Read the article

• M-Audio Delta starts up at wrong sample rate

  - by steevc

  When the PC starts my M-Audio Delta 66 is using 48000kHz sampling rate when it is set for 44100 in Envy24. This causes audio to play slower than it should. This is in Kubuntu 14.04 on my new PC using an AMD A8 6500 with 8GB. When I first installed it seemed okay, but at some point it went wrong and has been doing this consistently since then. Kernel is 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:31:42 UTC 2014 i686 athlon i686 GNU/Linux steve@slarti:~$ cat /proc/asound/card2/pcm0p/sub0/hw_params access: MMAP_INTERLEAVED format: S32_LE subformat: STD channels: 10 rate: 48000 (48000/1) period_size: 441 buffer_size: 3528 I can get it to switch to 44100 if I disable/enable the Delta in Pulseaudio volume control, but I have to do this every day and the sound still seems distorted. I can't see any issues in any of the config or log files I can find. If I boot the PC with a Mint Live USB it starts at 44100 and sound fine. Originally reported on Youtube is playing at the wrong speed - maybe soundcard related, but I'll close that and have this more relevant question instead.

  Read the article

• mount ext4 formated external drive->the drives green light won't stop flashing

  - by Gohlool

  I've installed kubuntu (after 10 years I am trying to play with linux) and manged to attach a external 1TB HDD drive over USB! The drive was formatted with NTFS and everything was working OK. I also changed the /etc/fstab here is my ntfs mount setting: /dev/sdb1 /media/samsung nts-3g auto,user,uid=1000,gid=1000,fmask=000,utf-8 0, 0 Now, I've reparationed the drive and formated it with ext4 filesystem! change my fstb like: /dev/sdb1 /media/samsung ext4 defaults,noatime 0, 0 now, when I plug my dive/or call sudo mount -a, my external drive's green light starts to flash and won't stop, but mount works .... What is the Problem? is this because of ext4? because with NTFS this won't happen! btw. after changing the owner of the /media/samsung and setting permissions 777, I can also access my drive like creating new folder atc. (although is's flashing constantly)! What is my mistake? btw. can you please let me know how to set the owner and the permissions for my /media/samsung directory in fstab for ext4 like I did it for NTFS? Thanks in advance

  Read the article

• suggestions for lonewolf dev setup

  - by d33j

  I'm looking for some suggestions for a better development setup. Background: I'm a crusty old software engineer (mostly java of late) and I have around 50 - 100 incomplete java projects scattered everywhere, usb keys, HDDs, and spanning across 5 or 6 computers etc, which have been put on hold for a few years (ie: family). I have no version control at home. I've been using IntelliJ for around 10 years, so that's the only constant. I'm thinking of nominating one machine as a headless server to put all my projects on, maybe a ubuntu box, that way It won't matter which device I'm on, all my projects can be accessed (and I don't have to waste time actually looking for them). I don't need to access code over the net. These are my own 'happy place' projects so I only work on them when I'm at home, however I can see the benefit of the tasking app being online, that way if I think of something while on public transport lets say, I can add it then & there, but it's not a requirement. I can wait until I get home to create tasks. Summary: So I need some sort of version control so I can rollback mistakes, and some sort of simple tasking software where I can assign tasks for myself later on when I get time. I use Subversion, Sonar, Jira and Crucible at work but I think it's a little bit of an overkill for me though. What do you suggest?

  Read the article

• Disabling monitor reconfiguration when closing lid

  - by Tomas

  I often need to move my laptop from one working place to another. When I do this, there are two events Ubuntu responds to by changing the monitor set up: Removing/attaching the VGA cable Closing/opening the lid of the laptop While removing the VGA cable gives me what I need (single screen, highest native resolution on the external screen if connected; otherwise highest resolution on the laptop), the laptop close/open lid response is not as good. Every time I close or open the lid, Ubuntu reconfigures the monitor set up. When I close the lid now... the screen goes black for a few seconds and it switches to clone, with my laptop screen disabled. Reopening results in... briefly a black screen, then the external monitor being used as desktop extension. Ubuntu thinks too much. My first and foremost question: Is there any way to let Ubuntu ignore lid close events? Ideally (or when there's no way to solve above question) I'd want to change how it deals with the screen reconfiguration. Why does Ubuntu toggle the screen configuration between external, clone and single display? Can't I just configure it to always use the external monitor, when present, in single screen mode? Note that similar questions have been asked before (most notably this one), but these have been closed perhaps wrongly. Any ideas are very welcome, I don't mind playing around a bit to see if something works.

  Read the article

• kismet on BCM43227

  - by Uttam Baroi

  I am trying to monitor wireless on Broadcom BCM43227, I used sudo airmon-ng to run the monitoring, i get command not found. I installed kismet, when i run, i get this *uttam@UT:~$ sudo kismet Launching kismet_server: //usr/bin/kismet_server Suid priv-dropping disabled. This may not be secure. No specific sources given to be enabled, all will be enabled. Non-RFMon VAPs will be destroyed on multi-vap interfaces (ie, madwifi-ng) Enabling channel hopping. Enabling channel splitting. NOTICE: Disabling channel hopping, no enabled sources are able to change channel. Source 0 (addme): Opening none source interface none... FATAL: Please configure at least one packet source. Kismet will not function if no packet sources are defined in kismet.conf or on the command line. Please read the README for more information about configuring Kismet. Kismet exiting. Done. uttam@UT:~$* I did check a blog about kismet on Broadcom that says about some binary drivers not allowing to do it... I used iwconfig and it says no extension : what is that well I need to give a hand on air monitoring............ help, how to do it

  Read the article

• Forking a GPL dual licensed software with business owned copyrights

  - by Eric

  After receiving some threats of the copyrights holder of a dual licensed software(GPL2 and commercial) to buy the commercial version for projects in production, I am thinking to make a fork. In a case of GPL2 and commercially dual licensed with business owned copyrights software, is forking the GPL2 version an option? Also, is forking a good way to deal with such cases? Background information The software is a web CMS released under 2 versions a GPL2 free open source edition and a commercial edition including technical support and extra functionality. The problem is that now, basing their argumentation on the "distribution" definition of the GPL2, the company holding the copyrights argue that delivering the software and some extensions to a client is considered as a "distribution". And that such a "distribution" falls under the GPL2 obligation to release the custom made extension code. Custom made extensions are mainly designs, templates and very specific functionality. Basically they give me 3 choices: Buying the commercial licensed edition for projects based on the GPL in production, Deleting all the projects in production based on GPL2 version, Releasing all the extensions as GPL2 code. The first 2 options are nothing realistic for finished projects. The third option could be fine, but as most of the extensions are very specific, cleaning the code to make it usable by other users means lot of works and also I am not sure the clients will appreciate to have their website designs and specific functionality released publicly. The copyrights holding company even contacted some clients directly, giving them the "choice". I know that this is a very corporate interpretation of GPL2, and a such action is nothing close to legal, but as an independent developer, I don't want to take the risk to get involved in some long and tiring legal procedures. PS. This question was first asked on Stack Overflow where it felt out of the scope and closed, after reading the present site FAQ, discussing about software licensing seems fine.

  Read the article

• How to Manage and Use LVM (Logical Volume Management) in Ubuntu

  - by Justin Garrison

  In our previous article we told you what LVM is and what you may want to use it for, and today we are going to walk you through some of the key management tools of LVM so you will be confident when setting up or expanding your installation. As stated before, LVM is a abstraction layer between your operating system and physical hard drives. What that means is your physical hard drives and partitions are no longer tied to the hard drives and partitions they reside on. Rather, the hard drives and partitions that your operating system sees can be any number of separate hard drives pooled together or in a software RAID Latest Features How-To Geek ETC Inspire Geek Love with These Hilarious Geek Valentines How to Integrate Dropbox with Pages, Keynote, and Numbers on iPad RGB? CMYK? Alpha? What Are Image Channels and What Do They Mean? How to Recover that Photo, Picture or File You Deleted Accidentally How To Colorize Black and White Vintage Photographs in Photoshop How To Get SSH Command-Line Access to Windows 7 Using Cygwin How to Kid Proof Your Computer’s Power and Reset Buttons Microsoft’s Windows Media Player Extension Adds H.264 Support Back to Google Chrome Android Notifier Pushes Android Notices to Your Desktop Dead Space 2 Theme for Chrome and Iron Carl Sagan and Halo Reach Mashup – We Humans are Capable of Greatness [Video] Battle the Necromorphs Once Again on Your Desktop with the Dead Space 2 Theme for Windows 7

  Read the article

• AMD E-450 APU with HD-6320 graphics produces jerky videos

  - by user80424

  I try to make videos smooth playing on a Lenovo E325 laptop equipped with AMD E-450 APU. This processor have Ati HD-6320 GPU integrated. I installed ATI proprietary driver (Catalyst 12.04) as described here. Everything went fine and got no errors. However I can not play smooth HD videos. Almost every second frame has been dropped in VLC with hardware acceleration enabled. vainfo shows: libva: VA-API version 0.32.0 Xlib: extension "XFree86-DRI" missing on display ":0". libva: va_getDriverName() returns 0 libva: Trying to open /usr/lib/x86_64-linux-gnu/dri/fglrx_drv_video.so libva: va_openDriver() returns 0 vainfo: VA-API version: 0.32 (libva 1.0.15) vainfo: Driver version: Splitted-Desktop Systems XvBA backend for VA-API - 0.7.8 vainfo: Supported profile and entrypoints VAProfileH264High : VAEntrypointVLD VAProfileVC1Advanced : VAEntrypointVLD fglrxinfo says: display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: AMD Radeon HD 6320 Graphics OpenGL version string: 4.2.11631 Compatibility Profile Context and fgl_glxgears produces ~250fps. Why are HD video frames dropped? CPU doesn't goes above 50% during playback.

  Read the article

• My wireless has suddenly became disabled by hardware switch, BIOS, rfkill, fn+f8 do nothing

  - by cwwk

  I have a toshiba l655d-s5145. There is no physical toggle for the wireless, although the f8 key is supposed to do the trick. It doesn't. The wireless has been working since October, and suddenly, nothing. RFKILL reports that the wireless is hard blocked, but unblock wifi, unblock 0, unblock all do nothing. I inserted a usb dongle, and that is also disabled by hardware switch, although rfkill reports that it is neither hard nor soft blocked. My onboard wireless is 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) according to lspci. Lsmod reports that these drivers are loaded. rtl8192c_common 75767 1 rtl8192ce rtlwifi 110972 1 rtl8192ce I resorted to reformatting the drive and reinstalling, but that also did not work. In BIOS I restored system defaults as there is no specific entry for wifi. Before reinstalling a pure xubuntu I went into Unity and saw that the airplane mode was on and despite being toggled off, it returned to the on position. I'm not sure where to find airplane mode in Xubuntu. What else can I do? I need my wireless.

  Read the article

• Wireless connection disconnects and reconnects with a Netgear WNA1000

  - by William Berkenkamp

  Ever since I made the permanent switch from Vista to Ubuntu i've had wireless connectivity problems. From watching the network manager when it disconnects it seems like it turns off the receiver for some reason. Could it be bad drivers? I used their install software and the site doesn't really offer driver downloads. The adapter is a Netgear WNA1000 if memory serves, and I don't know much about the router except that it's a Motorola Surfboard. And I figure this might help a bit *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 01 serial: 00:1b:b9:a7:39:a4 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:40 ioport:d800(size=256) memory:feaff000-feafffff memory:feac0000-feadffff *-network description: Wireless interface physical id: 1 bus info: usb@2:1.1 logical name: wlan0 serial: 00:26:f2:8b:fb:38 capabilities: ethernet physical wireless configuration: broadcast=yes driver=carl9170 driverversion=3.2.0-24-generic-pae firmware=1.9.4 ip=10.0.0.36 link=yes multicast=yes wireless=IEEE 802.11bgn I have tried installing WICD and it didn't fix the problem. Any help would be greatly appreciated. This problem is greatly limiting what I can do with my computer.

  Read the article

• how do I fix ati driver issue

  - by Michael

  I have little knowledge about ubuntu, but I am learning. Recently, my ubuntu 12.04 required that I update. I noticed that it was updating xorg and other things, after the update I was asked to reboot. I did. now when I start that computer up, it cannot detect any display and refuses to boot from usb. I have no idea how to recover my computer. It simply starts in what is akin to the terminal program and ask for my username and password. After that, I can enter commands. The problem may be because I manually installed drivers by copy pasting from some instructional that I now have no idea where they are, but what it amounts to is that I "built" the drivers. They were working GREAT until this update. I did this because otherwise I was unable to have sound through my hdmi. After I hand built the drivers, they worked great. After this update Ka-blam! nothing... Also, I had okay-ed lots of update sources (though all of them [xorg and such] were the stable versions, not the unstable update sources) Please help and thank you in advance. (if this is posted incorrectly or misplace, please let me know what to do)

  Read the article

• Loading Entities Dynamically with Entity Framework

  - by Ricardo Peres

  Sometimes we may be faced with the need to load entities dynamically, that is, knowing their Type and the value(s) for the property(ies) representing the primary key. One way to achieve this is by using the following extension methods for ObjectContext (which can be obtained from a DbContext, of course): 1: public static class ObjectContextExtensions 2: { 3: public static Object Load(this ObjectContext ctx, Type type, params Object [] ids) 4: { 5: Object p = null; 6:  7: EntityType ospaceType = ctx.MetadataWorkspace.GetItems<EntityType>(DataSpace.OSpace).SingleOrDefault(x => x.FullName == type.FullName); 8:  9: List<String> idProperties = ospaceType.KeyMembers.Select(k => k.Name).ToList(); 10:  11: List<EntityKeyMember> members = new List<EntityKeyMember>(); 12:  13: EntitySetBase collection = ctx.MetadataWorkspace.GetEntityContainer(ctx.DefaultContainerName, DataSpace.CSpace).BaseEntitySets.Where(x => x.ElementType.FullName == type.FullName).Single(); 14:  15: for (Int32 i = 0; i < ids.Length; ++i) 16: { 17: members.Add(new EntityKeyMember(idProperties[i], ids[i])); 18: } 19:  20: EntityKey key = new EntityKey(String.Concat(ctx.DefaultContainerName, ".", collection.Name), members); 21:  22: if (ctx.TryGetObjectByKey(key, out p) == true) 23: { 24: return (p); 25: } 26:  27: return (p); 28: } 29:  30: public static T Load<T>(this ObjectContext ctx, params Object[] ids) 31: { 32: return ((T)Load(ctx, typeof(T), ids)); 33: } 34: } This will work with both single-property primary keys or with multiple, but you will have to supply each of the corresponding values in the appropriate order. Hope you find this useful!

  Read the article

• Cities from Space: A Tour of Urban Planning Patterns

  - by Jason Fitzpatrick

  While many cities developed haphazardly and organically with little structured planning, other cities were developed following strict organization–organization that reveals itself beautifully when seen from space. Wired magazine shares a roundup of ten well-planned cities viewed with a satellite’s eye. Among the roundup our favorite is the oldest, seen in the photo above: This nine-pointed fortress is perhaps the best example of a planned city from the Renaissance. Palmanova was built in 1593 and is located in the northeastern corner of Italy near the border with Slovenia. It was intended to be home to a completely self-reliant utopian community that could also defend itself against the Ottomans. It had three guarded entrances, ramparts between each of the star points and eventually a moat. Sadly, nobody was willing to move there. Eventually it was used as free housing for pardoned criminals. Today it is a national monument, a tourist destination and home to around 5,000 people. Hit up the link below to check out the other nine well-planned entries in the roundup. How To Boot Your Android Phone or Tablet Into Safe Mode HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices

  Read the article

• Graphical glitches on grub and ubuntu desktop

  - by Klyn

  I've decided to install ubuntu but neither ubuntu or any other linux distro won't even get to the desktop screen or work after getting there. On windows 8, everything is just fine. my new video card works perfectly and I have no problem with anything about it. then when I try to boot from ubuntu with wubi or with usb everything goes like this: 1) Grub screen...no problem at all, colors are just fine everything looks okay 2) and then linux boot screen...weird background color, over the backround there are vertical stripes of red-orange dots. but on the ubuntu logo and text, there are no dots at all! -I mean its shape is perfect- 3) desktop is about the start but * vertical stripes of red colored dots are all over the unity screen*. then when I click on ubuntu's menu, it usually switches to black screen saying something about "panic occured"...and then it restarts or it gives no respond at all. problems started after putting hd 6570 video card on my asus m5a78lm-lx video card which has amd phenom II X4 processor on it. I've searched to find something but there was no similar question that's why I'm almost sure it is kind of unique. again, I'm writing on Windows 8 right now and everything works and looks perfect. so far I've updated bios and anyone knows anything to solve this?

  Read the article

• Brightness going up to 100% on loading certain websites in Chrome

  - by picheto

  I'm using Google Chrome version 21.0.1180.89 on Ubuntu 12.04 and my laptop is a Sony VAIO VPCCW15FL (spec sheet). My video driver is the propietary "NVIDIA accelerated graphics driver (post-release updates)(version-current updates)". After installing Ubuntu, I discovered that neither the brightness control buttons (hardware) or the brightness slider (software) worked, and found out I could get the hardware buttons to work by installing the nvidiabl.deb package and oBacklight script. I'm using nvidiabl-dkms 0.77 and oBacklight 0.3.8. Still, the slider on the Ubuntu "Settings" does not work, but I don't care. There is an annoying thing happening when loading certain pages in Google Chrome: the brightness goes up to 100% when loading the webpage or when leaving it (closing the tab or typing a different URL on the omnibox). However, the "brightness tooltip" (that default brightness notification) remembers the position it was set to, so if I adjust the brightness with the HW buttons, the level gets adjusted relative to the value it was set to before "going 100%". I disabled the flash PPAPI plugin, but left the NPAPI plugin enabled, and the problem went away for pages with flash content. Still, the same thing happens when viewing HTML5 video, or when loading, for example, the Chrome Web Store or using the Scratchpad extension. I suppose it has to do with the rendering of certain elements using the GPU, but this is just a guess. This brightness thing does not happen when using Firefox 15.0 or any other application I have used yet. Does anybody know why this may be happening and what could I do to fix this without changing browser? Thanks a lot.

  Read the article

• Is my gedit-latex-plugin working properly?

  - by arroy_0209

  I have installed gedit-latex-plugin(0.2 rc3) to be used with gedit(2.30.3) in ubuntu 10.04. If I use the command gedit file.tex& in terminal the file is opened and it seems everything works fine but in the terminal, lots of comments appear, some of which are: 2012-03-31 22:14:27,263 DEBUG resources - Initializing resource locating 2012-03-31 22:14:27,361 DEBUG Preferences - not found 2012-03-31 22:14:27,373 DEBUG JobManager - Created JobManager instance 147209196 2012-03-31 22:14:27,379 DEBUG GeditLaTeXPlugin - activate 2012-03-31 22:14:27,379 DEBUG WindowContext - init 2012-03-31 22:14:27,444 DEBUG GeditWindowDecorator - _init_tab_decorators: initialized 0 decorators 2012-03-31 22:14:27,511 DEBUG GeditWindowDecorator - active_tab_changed 2012-03-31 22:14:27,511 DEBUG GeditWindowDecorator - ---------- ADJUST: None 2012-03-31 22:14:27,513 DEBUG GeditWindowDecorator - No window-scope views for this extension 2012-03-31 22:14:27,513 DEBUG GeditWindowDecorator - _set_selected_bottom_view: 0 2012-03-31 22:14:27,514 DEBUG GeditWindowDecorator - _set_selected_side_view: 0 2012-03-31 22:14:27,539 DEBUG GeditWindowDecorator - tab_added 2012-03-31 22:14:27,952 DEBUG GeditTabDecorator - loaded 2012-03-31 22:14:27,964 DEBUG GeditTabDecorator - _adjust_editor: URI has changed 2012-03-31 22:14:27,965 DEBUG LaTeXCompletionHandler - init 2012-03-31 22:14:27,966 DEBUG LanguageModelFactory - Pickled object found: /home/abcd/.gnome2/gedit/plugins/GeditLaTeXPlugin/latex.pkl 2012-03-31 22:14:28,075 DEBUG CompletionDistributor - init 2012-03-31 22:14:28,078 DEBUG WindowContext - Created view LaTeXOutlineView 2012-03-31 22:14:28,078 DEBUG WindowContext - Created view IssueView 2012-03-31 22:14:28,079 DEBUG LaTeXEditor - init(file:///home/abcd/dir1/file1.tex) 2012-03-31 22:14:28,079 DEBUG LaTeXEditor - Parsing document... 2012-03-31 22:14:28,080 DEBUG IssueView - init 2012-03-31 22:14:28,082 DEBUG IssueView - init finished 2012-03-31 22:14:28,092 INFO LaTeXEditor - LaTeXParser.parse: 0.010000 2012-03-31 22:14:28,092 DEBUG LaTeXEditor - Parsed 1599 bytes of content 2012-03-31 22:14:28,093 DEBUG LaTeXOutlineView - set_outline 2012-03-31 22:14:28,093 DEBUG LaTeXOutlineView - init 2012-03-31 22:14:28,097 DEBUG LaTeXValidator - validate 2012-03-31 22:14:28,098 DEBUG LanguageModel - set_newcommands: 2012-03-31 22:14:28,102 DEBUG LaTeXEditor - Parsing finished 2012-03-31 22:14:28,105 DEBUG GeditWindowDecorator - ---------- ADJUST: .tex 2012-03-31 22:14:28,119 DEBUG GeditWindowDecorator - _set_selected_bottom_view: 0 2012-03-31 22:14:28,120 DEBUG GeditWindowDecorator - _set_selected_side_view: 0 I am not sure if the gedit-latex-plugin is working properly or is it facing some problem. Why are there so many debug messages? Can anybody please suggest what I should do?

  Read the article

• Ubuntu installed along side Win 8 but not shown in boot

  - by Mahesha999

  Actually the question says it all, but let me tell you what I did, so u may find exactly what might have went wrong: I have Win 8 installed on 500 GB HDD. SO I shrunk it four times for: partition 1 - the original partition containing Win 8 sys (118GB) partition 2 - NTFS formatted for my data (188GB) partition 3 - NTFS formatted for my data (100GB) partition 4 - NTFS formatted for Linux distro 1 (I reformatted it to ext4 during Ubuntu installation) (25GB) partition 5 - NTFS formatted for Linux distro 1 (21GB) So now I booted Ubuntu from USB (created from ubuntu-12.04-desktop-amd64.iso) and deleted last two partitions 4 and 5 to create: partition 1 - ext4 where I installed Ubuntu (25GB) partition 2 - Swap (4GB) partition 3 - unallocated space, not formatted yet (17GB) Ubuntu installation said it installed successfully and that I have to restart to boot in Ubuntu. But when I restart Windows 8 auto booted - there was no dual boot. After that I devided above 100GB partition to 80Gb and 20GB ones (since I read online that I should have /home in separate partition for convenience, so I created 20GB partition for it) So I went on to manually create boot entry using EasyBCD as below show in picture at below link http://s19.postimage.org/dof2zuvw3/Free_BCD.png When I created the entry, FreeBCD showed the information as follows: Windows Boot Manager -------------------- identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795} device partition=\Device\HarddiskVolume2 description Windows Boot Manager locale en-US inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e} integrityservices Enable default {ea8167ad-d189-11e1-90e4-ab2f09569dcc} resumeobject {ea8167a3-d189-11e1-90e4-ab2f09569dcc} displayorder {ea8167ad-d189-11e1-90e4-ab2f09569dcc} {ea8167b1-d189-11e1-90e4-ab2f09569dcc} toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d} timeout 10 displaybootmenu Yes Windows Boot Loader ------------------- identifier {ea8167ad-d189-11e1-90e4-ab2f09569dcc} device partition=C: path \Windows\system32\winload.exe description Windows 8 locale en-US osdevice partition=C: systemroot \Windows resumeobject {9bc7fdf7-3ae0-11e2-be77-806e6f6e6963} Real-mode Boot Sector --------------------- identifier {ea8167b1-d189-11e1-90e4-ab2f09569dcc} device partition=C: path \NST\AutoNeoGrub0.mbr description Ubuntu Notice the last bolded entry created. Howevever after thet, when I rebooted it firstly showed old DOS like bootloader (no Windows 8 UI based bootloader) with two entries Windows and Ubuntu. Windows 8 was booting correctly but I was getting an error while booting Ubuntu taking me to GRUB Rescue. Please help am new to Linux world.

  Read the article

< Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >