Search Results

Search found 12834 results on 514 pages for 'small wolf'.

Page 362/514 | < Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >

• Plesk wildcard subdomain not working

  - by avdgaag

  I'm trying to set up a wildcard subdomain on my VPS. Ultimately I want to end up with this: main site: my.domain.tld subdomain: sub1.my.domain.tld - should end up serving my.domain.tld/sub1 I am using plesk 8.6. I have created a DNS A record pointing at my VPS' IP. I have then restarted the DNS server and waited up to 24 hours. But trying ping sub1.my.domain.tld results in an unknown host error. So I know there's more stuff involved, configuring apache etc. But so far, I cannot even get the subdomain working at all, let alone serve up the right content. I have also tried a CNAME record, to no effect. I have also tried creating a regular subdomain with a fixed name, which also does not work. Pre-configured subdomains DO work, like ftp.my.domain.tld or mail.my.domain.tld. I am clearly missing something here, but my hosting provider charges a small fortune for any support request not involving hardware physically burning down, so I'm hesitant to ask them. Any ideas?

  Read the article

• Xen hipervisor 4.1 Kernel Panic on Ubuntu 12.04

  - by rkmax

  I have a fresh Ubuntu 12.04.1 amd64 server install following this guide I have used LVM option used all disk and make 2 LV /dev/mapper/vg-root / (80GB) vg-swap swap (4GB) now i install xen with apt-get install xen-hypervisor-4.1-amd64 and config /etc/default/grub like the guide and add GRUB_CMDLINE_XEN_DEFAULT="dom0_mem=768M" later all this i exec update-grub and reboot. but when i try to boot with Xen 4.1-amd64 always i get a kernel panic with the message Domain-0 allocation is too small for kernel image my questions are: this error is about what? where i can grow this allocation for avoid this error? grub.cfg menuentry 'Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os --class xen { insmod part_gpt insmod ext2 set root='(hd0,gpt2)' search --no-floppy --fs-uuid --set=root 3541e241-7f39-4ebe-8d99-c5306294c266 echo 'Loading Xen 4.1-amd64 ...' multiboot /xen-4.1-amd64.gz placeholder dom0_mem=768M echo 'Loading Linux 3.2.0-29-generic ...' module /vmlinuz-3.2.0-29-generic placeholder root=/dev/mapper/backup--xen-root ro rootdelay=180 echo 'Loading initial ramdisk ...' module /initrd.img-3.2.0-29-generic } Note: I've followed this guide too

  Read the article

• Excel VBA: select every other cell in a row range to be copied and pasted vertically

  - by terry alexander

  i have a 2200+ page text file. It is delivered from a customer through a data exchange to us with astericks to separate values and tildes (~) to denote the end of a row. The file is sent to me as a text file in Word. Most rows are split in two (1 row covers a full line and part of a second line). i transfer segments (10 page chunks) of it at a time into Excel where, unfortunately, any zeroes that occur at the end of a row get discarded in the "text to columns" procedure. So, i eyeball every "long" row to insure that zeroes were not lost and manually re-enter any that were. Here is a small bit of sample data: SDQ EA 92 1551 378 1601 151 1603 157 1604 83 The "SDQ, EA, and 92" are irrelevant (artifacts of data transmission). i want to use Excel VBA to select 1551, 1601, 1603, and 1604 (these are store numbers) so that i can copy those values and transpose paste them vertically. i will then go back and copy 378, 151, 157, and 83 (sales values) so that i can transpose paste them next to the store numbers. The next two rows of data contain the same store numbers but give the corresponding dollar values. i will only need to copy the dollar values so they can be transpose pasted vertically next to unit values (e.g. 378, 151, 157, and 83). Just being able to put my cursor on the first cell of interest in the row and run a macro to copy every other cell would speed up my work tremendously. i have tried using activecell and offset references to select a range to copy but have not been successful. Does any have any suggestions for me? Thanks in advance for the help.

  Read the article

• Can I use this power supply + case combination without causing problems?

  - by evan

  I am putting together a computer with a Antec P180 case and a Thermaltake TR2 RX 650 W power supply. The problem is that the Antec P180 case has a separate compartment for the power supply. With an opening for the on/off switch + ac connector to one side, a wall with a small hole for cables to route through on top, a wall on the bottom, and on the other side a fan which pushes air from the hard drive compartment to the power supply compartment. I think the design of the case assumes the power supplies fan is on the side next to the on/off switch, but the fan on the power supply I have is on top, which makes me worry about overheating the power supply. There is about half an inch between the top of the power supply and the wall and the other fan should keep air flowing to push out the air that the power supply pushes upwards. Do you think this setup should work, or should I go get another power supply? Thanks!! PS: This computer will be running an Ubuntu server, so it will always be on, but the rest of the components shouldn't be generating as much heat as they would on say a gaming machine.

  Read the article

• ubuntu 9.04 pptp broken after a power failure

  - by kevin42

  I have a small Ubuntu 9.04 router setup as a NAT box and a PPTP server. After a power failure everything except the PPTP server still works. A windows client gets to "registering your computer on the network" but then says Error 742: The remote computer does not support the required data encryption type. I did some research and I think the problem is with the ppp_mppe module. When I try to run 'modprobe ppp_mppe' it hangs indefinitely. What would cause this hang? Any ideas how I can troubleshoot this further? Thanks for the help! UPDATE: I am still having the problem, however I have found some more information. When the first user tries to connect to pptp, the process list shows modprobe sha1 running, and one instance of modprobe ppp_mppe for each connection attempt. If I killall modprobe at this point the next connection attempt works, and everything is fine until the next reboot. I'm planning to do a clean install at some point in the future but I'd really like to get to the real cause of this.

  Read the article

• Wildcard DNS, VirtualHosts on apache2, 404 for unused subdomains

  - by niel

  On an Apache2 server linked to by a DNS that includes a wildcard entry, e.g. *.example.com, subdomains that are not defined as ServerNames in any VirtualHosts point to the first defined VirtualHost, in my example this is 000-default. My Question:How would one get unused subdomains (subdomains not used in any virtualhosts) to return a 404 error to the requesting client? This must preferably show in server logs as a 404 as well. I have looked into the following possibilities: Redirecting any invalid subdomain to the home page or some other page.The problem with this method is, when someone links to your site as this.company.sucks.example.com, the client will see your home page or in my case 000-default if I do not redirect. Thanks, to Mike for pointing this out. (regex for "suck", etc definately not an option) Let the default VirtualHost point to a non-existent directory.Apache does not like this one bit, warning with every reload. Beyond the warning, everything seems fine. This seems like a hack. Does this seem like a problem (however small) to anyone? Point the default VirtualHost to a folder where the index.php is forbidden, thus creating a 403 status code.This is confusing and makes things like the following overly complicated: Say, for example, you use a subdomain per user (a big reason to use wildcard DNS, apparently), and users have the ability to view each others profiles at username.example.com. This solution is confusing to the user and completely not what I want to do. My ideal sollution will let the user know there is nothing to view at the url he entered. Preferably with a 404 and an error log entry for the address entered (not some other address). Any help would be greatly appreciated!

  Read the article

• Linux Distro for Beginners

  - by XLR3204S

  Well... I know that's the question arising all over the Internet, but I couldn't find an answer to suit me after googling for quite some time. I'd like to get a Linux distribution, and start learning using the CLI. I'm looking for a distribution already having GNOME installed, as I'll be using Linux-Command.org as my learning resource, and I'm not very familiar with CLI-based web browsers. I'd mainly like to get to know my way around a UNIX-based system, and then I think I'd like to pick up a CLI-only distribution, and start doing more complex stuff. I've tried Ubuntu, Fedora Core, OpenSolaris and FreeBSD (the last two aren't linux distros, I know). Ubuntu and FC are fine, they do come with Firefox, but I'm not really sure they're meant for learning purposes. OpenSolaris was OK as well, but I haven't got to play with it enough. FreeBSD 7.2 did not want to install itself on my 13" MacBook Pro, it generated a kernel panic everytime while copying the files to the disk. So to sum this up, I'm trying to learn Linux, and I'm willing to invest time into this (that is, not giving up when the first problems arise). I also have intermediate knowledge of C++, if it helps, and I'm also using the CLI-vim to write small C++ CLI-based programs, so text editing should be any problem. And... speaking of Macs, how am I going to be limited if I try to learn how to use UNIX-based systems using the OS X Terminal? It uses bash 3.2, isn't this the same shell as the one found on most of the Linux machines? How does the fact that OS X is based on FreeBSD 4.4, if I'm not mistaking, affect this? Thanks in advance, and hopefully, I'll have a starting point ASAP.

  Read the article

• SCCM 2012 - some remote clients unable to download some applications, 401.2 error

  - by growse

  I've got a small SCCM 2012 deployment with about 35 clients attached. Most of these clients are in the same network as the single SCCM host, but three are about 1000 miles away. Oddly, these three clients have stopped being able to download some application packages over BITS. Publishing a new package works for all the other clients, but for these three it never seems to download. If I go to the software centre, it just hangs at "0% downloaded". On the client, the DataTransfer.log says (repeatedly): CDTSJob::HandleErrors: DTS Job '{2DCBBB4C-6D84-479A-9218-885B72C834B9}' BITS Job '{E78147DD-4A26-4942-B4FD-6EC3EB77EECD}' under user 'S-1-5-18' OldErrorCount 442 NewErrorCount 443 ErrorCode 0x80072EE2 DataTransferService 30/07/2012 09:27:41 2964 (0x0B94) CDTSJob::HandleErrors: DTS Job ID='{2DCBBB4C-6D84-479A-9218-885B72C834B9}' URL='http://sccm-host:80/SMS_DP_SMSPKG$/Content_3e7f6982-6346-4f27-ae00-ad5dcb391455.1' ProtType=1 DataTransferService 30/07/2012 09:27:41 2964 (0x0B94) Cas.log says (repeatedly): Location update from CTM for content Content_3e7f6982-6346-4f27-ae00-ad5dcb391455.1 and request {AD041FCB-03D2-4FE6-A6FA-38A6B80FB2A1} ContentAccess 30/07/2012 08:33:39 5048 (0x13B8) Download location found 0 - http://lonsbrndsccm02.mcs.int.thomsonreuters.com/SMS_DP_SMSPKG$/Content_3e7f6982-6346-4f27-ae00-ad5dcb391455.1 ContentAccess 30/07/2012 08:33:39 5048 (0x13B8) Download request only, ignoring location update ContentAccess 30/07/2012 08:33:39 5048 (0x13B8) On the server, I've enabled failed request log tracing. The raw IIS log says the following: 2012-07-30 08:28:42 10.13.111.35 GET /SMS_DP_SMSPKG$/Content_3e7f6982-6346-4f27-ae00-ad5dcb391455.1/sccm /NSCP-0.4.0.172-x64.msi 80 - 10.2.27.19 Microsoft+BITS/7.5 401 2 5 293 Which is a 401.2 error, meaning access denied. The failed request log is large, but the punchline is that it chucks out a Unauthorized: Access is denied due to invalid credentials. message. All clients are members of the same domain and appear to be (otherwise) working great. I've re-installed the SCCM client, deleted and re-added the computer to SCCM. Some other packages seem to work fine, the daily anti-malware delta gets downloaded and patched without issue. Why are these packages failing?

  Read the article

• Virtualbox HTTP load testing, host CPU overload issues

  - by aschuler

  I'm doing HTTP load testing benchmarks (using Apache Benchmark and Siege) on a small Java EE 1.7.0 / Tomcat 7.0.26 application running on a Debian Squeeze 6.0.4 x64 virtualized with Virtualbox 4.1.8. The computer host is Ubuntu 11.10 x64. I've modified those parameters in the Tomcat server.xml : <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="200000" redirectPort="8443" acceptCount="2000" maxThreads="150" minSpareThreads="50" /> The application executed on the server takes around 300ms. This app is running well until a certain amount of concurrent connections like those one : ab -n 500 -c 150 http://xx.xx.xx.xx:8080/myapp/ ab -n 1000 -c 50 http://xx.xx.xx.xx:8080/myapp/ siege -b -c 100 -r 20 http://xx.xx.xx.xx:8080/myapp/ A lot of socket connection timed out happens and this completly overload the host processor (but the CPU load inside the VM is normal). Doing an htop on the host, i can see that the Virtualbox processus is running under 300% CPU and never come down even after the load test is finished. (I've allocated 4 processors to the VM, if I allocate only one processor, CPU load goes under 100%). Restarting Tomcat don't do anything, i'm forced to restart the whole VM. I've tryed to launch those ab/siege commands locally on the VM and everything goes well. I first thought it was related to a linux network limit as explained here: Running some benchmarks using ab, and tomcat starts to really slow down So I've modified those TCP parameters : echo 15 > /proc/sys/net/ipv4/tcp_fin_timeout echo 30 > /proc/sys/net/ipv4/tcp_keepalive_intvl echo 1 > /proc/sys/net/ipv4/tcp_tw_recycle echo 1 > /proc/sys/net/ipv4/tcp_tw_reuse It seems to be better, but it continues to overload the host CPU and output socket connections time out at a certain amount of concurrent connections. I'm wondering if this is not related to how Virtualbox handles external concurrent connections.

  Read the article

• How to enable telnet with port 3306 during Master to master replication on MySQL Server

  - by Mainio

  I am trying to do Master to Master Replication in Windows Server 2008. I am successfully able to replicate all the database of Master 1 to Master 2. But I am unable to replicate the changes made on Master 2 to Master 1. Later on I found that, I can telnet to Master 1 from Master 2 with port 3306 but I am not able on telnet from Master 1 to Master 2. When I check netstat on both Master. I found the following result. I couldn't publish my public IP so I put name as Master 1 and Master 2 for their respective IP Master 1 C:\Users\XXXXX>netstat Active Connections Proto Local Address Foreign Address State TCP Master 1:3306 Master 2:61566 ESTABLISHED TCP Master 1:3389 My remote:56053 ESTABLISHED TCP 127.0.0.1:3306 Master 1:60675 ESTABLISHED TCP 127.0.0.1:3306 Master 1:60712 ESTABLISHED TCP 127.0.0.1:60675 Master 1:3306 ESTABLISHED TCP 127.0.0.1:60712 Master 1:3306 ESTABLISHED Master 2 C:\Users\XXXX>netstat Active Connections Proto Local Address Foreign Address State TCP Master 2:3389 My remote:56124 ESTABLISHED TCP Master 2:61566 Master 1:3306 ESTABLISHED TCP Master 2:61574 bil-sc-cm02:http ESTABLISHED TCP 127.0.0.1:3306 Master 2:61562 ESTABLISHED TCP 127.0.0.1:3306 Master 2:61563 ESTABLISHED TCP 127.0.0.1:61562 Master 2:3306 ESTABLISHED TCP 127.0.0.1:61563 Master 2:3306 ESTABLISHED TCP 127.0.0.1:61573 Master 2:3306 TIME_WAIT All shows that In my master 2, port 3306 is not activate. Now I need solution over here. How can I figure it. Your small suggestion would be million for me. Thank you Regards, Udhyan

  Read the article

• How to use most of memory available on MySQL

  - by Zilvinas

  I've got a MySQL server which has both InnoDB and MyISAM tables. InnoDB tablespace is quite small under 4 GB. MyISAM is big ~250 GB in total of which 50 GB is for indexes. Our server has 32 GB of RAM but it usually uses only ~8GB. Our key_buffer_size is only 2GB. But our key cache hit ratio is ~95%. I find it hard to believe.. Here's our key statistics: | Key_blocks_not_flushed | 1868 | | Key_blocks_unused | 109806 | | Key_blocks_used | 1714736 | | Key_read_requests | 19224818713 | | Key_reads | 60742294 | | Key_write_requests | 1607946768 | | Key_writes | 64788819 | key_cache_block_size is default at 1024. We have 52 GB's of index data and 2GB key cache is enough to get a 95% hit ratio. Is that possible? On the other side data set is 200GB and since MyISAM uses OS (Centos) caching I would expect it to use a lot more memory to cache accessed myisam data. But at this stage I see that key_buffer is completely used, our buffer pool size for innodb is 4gb and is also completely used that adds up to 6GB. Which means data is cached using just 1 GB? My question is how could I check where all the free memory could be used? How could I check if MyISAM hits OS cache for data reads instead of disk?

  Read the article

• MacBook Pro battery capacity 65K mAh

  - by Alexander Gladysh

  I have a 15" MacBook Pro 3.1 (that is Late 2007 model AFAIR). I've bought it new a couple of years ago. Recently its on-battery power lifespan became very short (30 to 10 minutes). When my notebook turns itself off due to "low battery" and I press the small button on the battery itself, all LED lights are alight, indicating full charge. When I plug in the power adapter, my Mac displays that "battery is fully charged, finishing charging process" (I have a Russian OS X 10.5.7, so that is a rough translation), but the LEDs on battery itself display (seemingly accurate) status that there are one or two "LEDs still not charged". My battery have as few as 37 recharge cycles (yes, I've neglected calibration over the time I've used it). Battery info programs like iBatt2 report battery capacity of 65 337 mAh (with by-design capacity of 5600 mAh). I get it that something went wrong with battery electronics. I've tried resetting my Mac's PRAM and SMC, it did not changed anything. Now I'm trying to recalibrate the battery, but looks like it does not help as well. Will try to recalibrate it several times in a row. I'd buy a new battery if I knew if it is battery fault, not a notebook's. Any suggestions? Update: After recalibration, my battery status now displays battery capacity of 1500 mAh. But with every recalibration (or simply when I use notebook without power adapter plugged in) this number changes in the range from 200 mAh to 1700 mAh. LEDs on battery now are synchronous with what nodebook thinks on the charge level. Also I've noticed that cycle count changes rather slowly. It is now 39, it was 37 when I've started recalibration, and I went through the process at least ten times... So, the main question is: does it look like that replacing the battery would help me (or does it look like this is notebook's problem)? I guess I should try replacing the battery.

  Read the article

• Outlook users connected to exchange can email from other email accounts

  - by Sherriffwoody

  We have found an issue on our systems whereby an outlook user (both 2007 and 2010) connected to our Exchange server (2007) can send emails as other users using the following steps Within Outlook Click <New Email> Select the <From> button to show a list of accounts outlook contains, but it also shows the option Select<Other Email Address>. This brings up a small dialog box with another button which when selected allows the user to select an email from their contacts or the Active Directory. The user in most cases can select any email within the Active Directory and send an email as if it were coming from that selected email. It seems not everyone has this ability and I'm guessing it is something to do with settings in exchange or AD(version 6) or is there a group policy that can be implemented to stop users being able to do this. We have no idea what allows this and I have failed to find anything using Dr Google. No one has setup delegates within outlook but it does seem to be something similar? Does anyone know how to lock this down? Thanks in advance

  Read the article

• NAT, iptables and problematic ports

  - by Rajie

  I am building a small office network with virtual machines. My schema is this: Computer A: gateway, ip 1.1.1.1, iptables used for NAT [eth0=public internet dhcp, dhcp; eth1=gateway] Computer B: client, ip 1.1.1.2, using gateway from Computer A. NAT is working, and Computer B can access the internet using the A's gateway. I redirected some incoming ports from A to B (for instance, if A receives a request to port 80, it goes automatically to Computer B's Apache). The thing is that I do not really understand how to open/close ports for Computer B from Computer A. I know how to close a port: iptables -A INPUT -p tcp --dport 80 -j DROP And it will refuse all incoming (not output) connections to port 80. However, this works for main interface eth0. I tried to, for instance, drop ingoing and outgoing connections for Computer B, port 80: iptables -A FORWARD -i eth1 -o eth0 -p tcp --dport 80 -j DROP iptables -A FORWARD -i eth0 -o eth1 -p tcp --dport 80 -j DROP But it does not work. And I cannot figure out what I am doing wrong. Any clue?

  Read the article

• Unable to connect to EC2 instance after "reboot"

  - by KPL

  I am not able to connect to my m1.small instance after rebooting it. I have already associated the public IP with this instance. Upon checking the system log, this seems to be the issue: cloud-init-nonethttp://11.84: waiting 10 seconds for network device cloud-init-nonethttp://21.85: waiting 120 seconds for network device cloud-init-nonethttp://141.85: gave up waiting for a network device. Cloud-init v. 0.7.3 running 'init' at Sun, 18 May 2014 07:02:55 +0000. Up 142.54 seconds. ci-info: +++++++++++++++++++++++Net device info++++++++++++++++++++++++ ci-info: +--------+-------+-----------+-----------+-------------------+ ci-info: | Device | Up | Address | Mask | Hw-Address | ci-info: +--------+-------+-----------+-----------+-------------------+ ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | . | ci-info: | eth0 | False | . | . | 02:43:xx:xx:xx:xx | ci-info: +--------+-------+-----------+-----------+-------------------+ ci-info: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Route info failed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! A bunch of these follow the above message: 2014-05-18 07:02:56,178 - url_helper.pyWARNING: Calling http://169.254.169.254/2009-04-04/meta-data/instance-id failed 0/120s: request error [HTTPConnectionPool(host='169.254.169.254', port=80): Max retries exceeded with url: /2009-04-04/meta-data/instance-id (Caused by : Errno 101] Network is unreachable) This is obviously related to the network interface not being working correctly. I have tried this so far: Relaunch a new instance from the custom AMI (created from EBS) of the failing instance. The same error shows up in the logs. Attach a new network interface to the EC2 instance. The error still persists. eth1 shows up in the list but the "up" column is False.

  Read the article

• How much network latency is "typical" for east - west coast USA?

  - by Jeff Atwood

  At the moment we're trying to decide whether to move our datacenter from the west coast (Corvallis, OR) to the east coast (NY, NY). However, I am seeing some disturbing latency numbers from my location (Berkeley, CA) to the NYC host. Here's a sample result, retrieving a small .png logo file in Google Chrome and using the dev tools to see how long the request takes: Berkeley to NYC server: 215 ms latency, 46ms transfer time, 261ms total Berkeley to Corvallis server: 114ms latency, 41ms transfer time, 155ms total some URLs if you want to try yourself: http://careers.stackoverflow.com/content/cso/img/logo.png (NY, NY) http://serverfault.com/cache/logo.png (Corvallis, OR) It makes sense that Corvallis, OR is geographically closer to Berkeley, CA so I expect the connection to be a bit faster.. but I'm seeing an increase in latency of +100ms when I perform the same test to the NYC server. That seems .. excessive to me. Particularly since the time spent transferring the actual data only went up 10%, yet the latency went up ten times as much! That feels... wrong... to me. I found a few links here that were helpful (through Google no less!) ... http://serverfault.com/questions/63531/does-routing-distance-affect-performance-significantly http://serverfault.com/questions/61719/how-does-geography-affect-network-latency http://serverfault.com/questions/6210/latency-in-internet-connections-from-europe-to-usa ... but nothing authoritative. So, is this normal? It doesn't feel normal. What is the "typical" latency I should expect when moving network packets from the east coast <--> west coast of the USA?

  Read the article

• MySQL tmpdir on /dev/shm with SELinux

  - by smorfnip

  On RHEL5, I have a small MySQL database that has to write temp files. To speed up this process, I would like to move the temporary directory to /dev/shm by putting the following line into my.cnf: tmpdir=/dev/shm/mysqltmp I can create /dev/shm/mysqltmp just fine and do chown mysql:mysql /dev/shm/mysqltmp chcon --reference /tmp/ /dev/shm/mysqltmp I've tried to make SELinux happy by applying the same settings that are in effect for /tmp/ (and /var/tmp/), which is presumably where MySQL is writing its tmp files if tmpdir is undefined. The problem is that SELinux complains about MySQL having access to that directory. I get the following in /var/log/messages: SELinux is preventing mysqld (mysqld_t) "getattr" to /dev/shm (tmpfs_t). SELinux is a hard mistress. Details: Source Context root:system_r:mysqld_t Target Context system_u:object_r:tmpfs_t Target Objects /dev/shm [ dir ] Source mysqld Source Path /usr/libexec/mysqld Port <Unknown> Host db.example.com Source RPM Packages mysql-server-5.0.77-3.el5 Target RPM Packages Policy RPM selinux-policy-2.4.6-255.el5_4.1 Selinux Enabled True Policy Type targeted MLS Enabled True Enforcing Mode Enforcing Plugin Name catchall_file Host Name db.example.com Platform Linux db.example.com 2.6.18-164.2.1.el5 #1 SMP Mon Sep 21 04:37:42 EDT 2009 x86_64 x86_64 Alert Count 46 First Seen Wed Nov 4 14:23:48 2009 Last Seen Thu Nov 5 09:46:00 2009 Local ID e746d880-18f6-43c1-b522-a8c0508a1775 ls -lZ /dev/shm shows drwxrwxr-x mysql mysql system_u:object_r:tmp_t mysqltmp and permissions for /dev/shm itself are drwxrwxrwt root root system_u:object_r:tmpfs_t shm I've also tried chcon -R -t mysqld_t /dev/shm/mysqltmp and setting the group on /dev/shm to mysql with no better results. Shouldn't it be enough to tell SELinux, hey, this is a temp directory just like MySQL was using before? Short of turning off SELinux, how do I make this work? Do I need to edit SELinux policy files?

  Read the article

• Public DNS redirect subdomain to Windows Server 2003 DNS

  - by user125248

  I'm a programmer by trade but often dabble in sysadmin tasks and responsibilities. I have recently been tasked with setting up a Windows Server 2003 networking environment for a small business with multiple branches. The business already has a domain name they use to host a website at www.example.com. Currently the DNS nameservers are at Zerigo and I would very much like it to remain that way (as they specialize in just providing DNS services and they do this very well). We also have a bunch of other subdomains we use to conviniently connect to the various branches that have static IPs assigned from ISPs, so we're able to connect easily to branch1.example.com. Is it possible to 'redirect' all intranet.example.com DNS requests to a Windows box? I've been doing a little reading and I see there are NS records that might be able to do this, and the Windows DNS server could then perform all of the lookups for that subdomain, say, server1.intranet.example.com or client5.intranet.example.com. This would seem better to me, than registering a new domain name for the organisation, as keeping a single domain name makes more organizational sense.

  Read the article

• Digital Asset Management, iPhoto / Aperture server... alternative

  - by Sisyphus

  Afternoon, Clients, 10 : All Apples running either Leopard or Snow Leopard Server : Snow Leopard server, (and I have a old Dell Poweredge 650 at home running Gentoo 2.6, if anybody as a Linux solution). The situation: I work in small design company with 8 people, at present we are looking to consolidate all our image files onto one location, at present we each use our preferred single user DAM solution, be it, Adobe Bridge, iPhoto/Aperture (some don't bother at all) The filetypes commonly used are .psd, .pdf, .eps, .tiff, .jpg and RAW image files. Ideally what is needed: Centralised on one server, but allows us to search via spotlight (not essential, but would be nice) Include searchable metadata information such as date, location, title Open-source or as low cost as possibly Allow simultaneous users to import files So far, I have looked at a few open source DAM, systems, such as Razuna, Gallery (not strictly DAM), ResourceSpace, Notre-DAM, while these are brilliant and open-source, they don't integrate as smoothly with the Desktop as iPhoto and aperture. For iPhoto and aperture, I have tried creating a Shared library on the server (a tad laggy), and also using a drive with no permissions, put a library and letting each client read from it, however if they want to put images onto the library only, it's only supports one user at a time writing to the library... Any ideas what could fulfill our needs? Or is it time to bite the bullet for FinalCut Server? Thanks in advance.

  Read the article

• o3d javascript uncaught referenceerror

  - by David

  hey, im new to javascript and am intersted in creating a small o3d script: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Test Game Website</title> </head> <body> <script type="text/javascript" src="o3djs/base.js"></script> <script type = "text/javascript" id="myscript"> o3djs.require('o3djs.camera'); window.onload = init; function init(){ document.write("jkjewfjnwle"); } </script> <div align="background"> <div id="game_container" style="margin: 0px auto; clear: both; background-image: url('./tmp.png'); width: 800px; height:600px; padding: 0px; background-repeat: no-repeat; padding-top: 1px;"></div> </div> </body> </html> the browser cant seem to find o3djs/base.js in this line <script type="text/javascript" src="o3djs/base.js"></script> and gives me an uncaught referenceerror at this line o3djs.require('o3djs.camera'); Obviously, because it can't find the o3djs/base.js... I have installed the o3d pluggin from google and they say that should be IT ive tried on firefox, ie and chrome thanks

  Read the article

• How to count the most recent value based on multiple criteria?

  - by Andrew

  I keep a log of phone calls like the following where the F column is LVM = Left Voice Mail, U = Unsuccessful, S = Successful. A1 1 B1 Smith C1 John D1 11/21/2012 E1 8:00 AM F1 LVM A2 2 B2 Smith C2 John D2 11/22/2012 E1 8:15 AM F2 U A3 3 B3 Harvey C3 Luke D3 11/22/2012 E1 8:30 AM F3 S A4 4 B4 Smith C4 John D4 11/22/2012 E1 9:00 AM F4 S A5 5 B5 Smith C5 John D5 11/23/2012 E5 8:00 AM F5 LVM This is a small sample. I actually have over 700 entries. In my line of work, it is important to know how many unsuccessful (LVM or U) calls I have made since the last Successful one (S). Since values in the F column can repeat, I need to take into consideration both the B and C column. Also, since I can make a successful call with a client and then be trying to contact them again, I need to be able to count from the last successful call. My G column is completely open which is where I would like to put a running total for each client (G5 would = 1 ideally while G4 = 0, G3 = 0, G2 = 2, G1 = 1 but I want these values calculated automatically so that I do not have scroll through 700 names).

  Read the article

• iSCSI SAN Implementation with several ESXi hosts and two Equallogic SANs

  - by Sergey

  I work for a small state college. We currently have 4 ESXi hosts (all made by Dell), 2 EqualLogic SANs (PS4000 and PS4100) and a bunch of old HP Procurve switches. The current setup is very far from being redundant and fast so we want to improve it. I read several threads but get even more confused. The Procurve Switches are 2824. I know they don't support Jumbo Frames and Flow Control at the same time, but we have plans to upgrade to something like Procurve 3500yl. Any suggestions? I heard Dell Powerconnects 6xxx are pretty good but I'm not sure how they compare to HPs. There will be a 4-port Etherchannel (Link Aggregation) between the switches, and all control modules on SAN will be connected to different switches. Is there anything that will make the setup better? Are there better switches then Procurves 3500yl that cost less than 5k? What kind of bandwidth can I expect between ESXi hosts (they will also be connected to 2824 with multiple cables) and SANs?

  Read the article

• NVidia ION and /dev/mapper/nvidia_... issues.

  - by Ritsaert Hornstra

  I have an NVidia ION board with 4 SATA ports and want to use that to run a Linux Server (CentOS 5.4). I first hooed up 3 HDs (that will be a RAID5 array) and a forth small boot HD. I first started to use the onboard RAID capability but that does not work correctly under Linux: the raid capacity is not a real RAID but uses lvm to define some arays. After setting the BIOS back to normal SATA mode and whiping the HDs, the first boot harddisk (/dev/sda) is seen as /dev/sda BEFORE mounting and after mounting as /dev/mapper/nvidia_. CentOS is unable to install on it (and grub is not installable on it either). So somehow the harddisk is still seen as if it belongs to some lvm volume. I tried to clean out the HD by issuing a few dd if=/dev/zero of=/dev/sda commands to wipe the starting cylinders and final cylinders but to no avail. Did anyone see this problem and did anyone find a solution? UPDATE When I create only a single ext3 partition on the first HD (/dev/mapper/nvidia_...) no LVM partitions are seen and I can boot from /dev/mapper/nvidia_.... Now the next step is to see how I can get rid of this folly.

  Read the article

• How could Google Latitude find my exact PC location with no GPS or public wifi?

  - by Mike

  I found a similar question here but I still don't get it. You see, I live in a small town and every time I check my IP location via online services or speed test websites, my location appears to be my ISP server location (which in my case is 250 miles away). But when I tried Google latitude, it pinpointed my exact location within less than 100 meters! I use Windows Vista, Google Chrome, and when I got the message that "Google is trying to locate you", I agreed just to check what the result will be. It was scary, very scary! What I've come up after reading the above link is that Google have a kind of extensive WiFi database locations. That could be understandable with the case of public and open WiFis that are used with a lot of people. Some of them might be using applications that could gather location data and somehow this information ends up in giant Google databases. From those, Google could pinpoint a WiFi location based on its MAC address along with these bits of info that have been gathered via various sources. The issue here is that my WiFi is private, I don't even broadcast my WiFi name. So how on earth did Google find my exact PC location? Please break down the answer in layman's terms as possible.

  Read the article

• external drive enclosure -> software RAID 5?

  - by memilanuk

  Hello all, I have two older PCs on my LAN posing as 'servers'... one running FreeNAS off a USB stick using three 500GB hdds in a ZFS RAID-Z pool serving as storage for the LAN and one running Debian Lenny with an 80GB drive used as a general purpose 'tinker' box that I can ssh into, etc. Problem is that the SMART report for one of those 500GB drives in the FreeNAS box is showing some pre-failure attributes, and the whole array is a little small anyways. Rather than simply replace one 500GB drive with another 500GB drive, and have no backup of the file server, I'd like to upgrade all the drives to 2TB ones - but I have no where to store that much data in the mean while. As such, I started looking at getting a 4-bay external drive enclosure with an eSATA card for the Debian box, with the hopes of creating a RAID5 + LVM setup using those drives and backing the data up to that external drive enclosure. After the backup is done, replace the drives in the FreeNAS box and rebuild the array there and mirror the data back. Then, I'd have both the primary storage (on the FreeNAS box) and a backup (which I don't have currently) using the external drive enclosure on the Debian box. My big question is... most of these external drive boxes seem to claim support for JBOD, RAID 0, 1, 10, 5, etc. - should I presume that is simply fake RAID like many commodity mobos have, and not really usable in Linux? In that case, with all the drives hanging off the one eSATA connection, will Linux (specifically Debian Squeeze, as I plan on upgrading that box here shortly) see all four drives, or just the first one? Will I be able to configure them in a RAID5 array as desired? Thanks, Monte

  Read the article

< Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >