Search Results

Search found 15323 results on 613 pages for 'db2 connect'.

Page 364/613 | < Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >

• "Disk boot failure" error after installing Windows 7 on SSD

  - by Tony_Henrich

  I have a system with 3 SATA drives which runs fine. Got a new SSD drive and wanted to install a fresh Windows-7 on it. So I removed the boot drive and replaced it with the SSD drive. Installed Windows and when it was done, rebooted and now I get "Disk boot failure. Insert system disk and press enter" error message. I reinstall again and still same message. Removed the SSD and put back the original drive and I got the same message!! I checked the BIOS and things look good. Something is wrong. Two questions: 1- Why isn't the new Windows booting from the SSD? 2- Why isn't the machine booting using the previous working configuration anymore, after removing the SSD? I did connect it during the second Windows installation but it was the last drive in the SATA connector. Would Windows installer mess with its MBR sector?

  Read the article

• DYNDNS setup with TightVNC on Windows Server 2008 R2

  - by StealthRT

  Hey all, i seem to be having a problem with getting ports to forward on my Windows Server 2008 R2 PC. I already set all my port forwarding for 5900/5800 on my router for my PC's IP address (192.168.1.22) but when i try to use the TightVNC PFPortChecker on port 5900 it tells me its not opened! I can not even connect to my DYNDNS server name (xxxxxxx.dyndns.org). As a side note, i am running Windows XP SP3 within a VirtaulBox inside Windows Server 2008 R2 but running the PFPortChecker in Windows 2008 R2 brings the same results as it does in the VM. I also added them to the Windows Firewall Advanced Security form to add those inbound ports for full access. What could i possibly be missing? Thanks for your time! David

  Read the article

• "broken" windows xp after disc replacement

  - by epeleg

  Windows xp pro OEM was installed on my machine, Disk was failing so I cloned it to a new disk (larger one). Now windows said that the hardware has changed significantly and I need to re-activate, and I would gladly do (got the product number on a sticker on the machine) - only that for running the activation process I need to be logged-in, but when I try to login it just automatically logs me out again :( I know my credentials are O.K. because I can connect to the machine remotely and also use sysinternals tools such as PsExec or PSList etc. on it from a remote machine by specifying user and pasword. Login via safemode does not work any differently then in normal mode... I tried to run rundll32.exe syssetup,SetupOobeBnk (as suggested in several places on the net) using PsExec but it did not seem to help... Is there any way out of this evil circle? [ can't log in because not activated - cant activate because not logged in ]

  Read the article

• WPA2 authentication fails using USB network devices (Linksys and Rosewill)

  - by Greg Youtz

  Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. Tried the same with a Linksys USB network adapter. Both failed to authenticate. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no Would appreciate insight on how to chase this down.

  Read the article

• Netscreen-Remote Equivalent On Linux

  - by mojah

  We're running a simple Juniper VPN tunnel (using Juniper SSG5's) for outside-network access, which works great for Windows PCs since they can connect using the supplied Netscreen-Remote VPN client. Has anyone successfully managed to get this working under Linux? There are several alternatives, but none seem to actually work. The following were tried, but failed: - http://www.prolixium.com/netscreenlinux - http://david.dw-perspective.org.uk/Juniper-Networks-SSL-VPN-Client-On-Linux.html The official version is no Linux Client will ever be developed by Juniper themselves, but perhaps other (open) software exists that has been found compatible to Juniper's VPN?

  Read the article

• Invalid domains in DNS don't work on mac/*nix like systems

  - by David Mulder

  At work we use domains like abc-01, which work fine on windows. Whilst developing mobile applications we already saw that this doesn't work on both iOS and android which we fixed for a few specific domains (by setting the dns up that abc-01.def.local also works in those) and was assumed to be caused by it being an invalid domain. Now however it's necessary to connect through VPN from a mac and changing all relevant domains is not an option at the moment (far too many of them and would require changing the settings of far too many applications), so I was hoping whether somebody knows a trick or setting to get this to work on mac (or even linux in general).

  Read the article

• Using Lighttpd: apache prox or direct connection?

  - by Halfgaar

  Hi, I'm optimizing a site by using lighttpd for the static media. I've found that a recommended solution is to use Apache Proxy to point to the lighttpd server. But, does that use up an Apache thread/process per request? In my setup, I've noticed that all my processes are used up, even though they aren't doing anything, CPU wise. To free up apache processes, I've configured lighttpd and the amount of processes needed is lowered significantly, Munin shows. However, I've set it up to connect directly to lighty, to prevent apache workers from server static media. My question is: when using Apache Proxy, does that also use up a process/worker?

  Read the article

• Why is my Internet connection randomly dropping?

  - by Jeanno

  Ever since I have installed 12.04 (clean install not an upgrade), i have been having a drop in the Internet connection. The drop in the connection can be anything from 15 seconds to about 3 mins, and then the connection comes back. This behaviour happens while I am actively browsing the Internet, or if I wake up the computer and open Firefox (sometimes I have connection and sometimes I don't) . Please note that when the internet connection is on, it is not slow (as speedtest.net results show) In the beginning, I thought it was a problem with the driver r8169 for my RTL8111/8168B Ethernet card, so I downloaded the r8168 from Realtek website, followed the detailed instructions (blacklisted r8169, changed the file to '.bsh' ...), but still the same problem persisted. So I switched to a wireless connection, and I got the same problem with internet connection dropping randomly. Any ideas? Thanks in advance Output from 'lspci -v' Code: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f8000000-fa0fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dbffffff Capabilities: [88] Subsystem: Dell Device 04a7 Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f4000000-f60fffff Prefetchable memory behind bridge: 00000000c0000000-00000000cbffffff Capabilities: [88] Subsystem: Dell Device 04a7 Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at f6108000 (64-bit, non-prefetchable) [size=16] Capabilities: [50] Power Management version 3 Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at f6107000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f6100000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fa400000-fa4fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Prefetchable memory behind bridge: 00000000dc100000-00000000dc1fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fa300000-fa3fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fa200000-fa2fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f6106000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation P67 Express Chipset Family LPC Controller (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel modules: iTCO_wdt 00:1f.2 RAID bus controller: Intel Corporation 82801 SATA Controller [RAID mode] (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 42 I/O ports at f070 [size=8] I/O ports at f060 [size=4] I/O ports at f050 [size=8] I/O ports at f040 [size=4] I/O ports at f020 [size=32] Memory at f6105000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA v1.0 Capabilities: [b0] PCI Advanced Features Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: Dell Device 04a7 Flags: medium devsel, IRQ 5 Memory at f6104000 (64-bit, non-prefetchable) [size=256] I/O ports at f000 [size=32] Kernel modules: i2c-i801 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0dc5 (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at f8000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=128M] Memory at d8000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at fa000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 01:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at fa080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 02:00.0 VGA compatible controller: NVIDIA Corporation Device 0dc5 (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f4000000 (32-bit, non-prefetchable) [size=32M] Memory at c0000000 (64-bit, prefetchable) [size=128M] Memory at c8000000 (64-bit, prefetchable) [size=64M] I/O ports at d000 [size=128] Expansion ROM at f6000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at f6080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 03:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fa400000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 51 I/O ports at c000 [size=256] Memory at dc104000 (64-bit, prefetchable) [size=4K] Memory at dc100000 (64-bit, prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 03-00-00-00-68-4c-e0-00 Kernel driver in use: r8168 Kernel modules: r8168 05:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller (rev 01) (prog-if 10 [OHCI]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at fa300000 (64-bit, non-prefetchable) [size=2K] I/O ports at b000 [size=256] Capabilities: [50] Power Management version 3 Capabilities: [80] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [98] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [130] Device Serial Number 00-10-dc-ff-ff-cf-56-1a Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 06:00.0 SATA controller: JMicron Technology Corp. JMB362 SATA Controller (rev 10) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 19 I/O ports at a040 [size=8] I/O ports at a030 [size=4] I/O ports at a020 [size=8] I/O ports at a010 [size=4] I/O ports at a000 [size=16] Memory at fa210000 (32-bit, non-prefetchable) [size=512] Capabilities: [8c] Power Management version 3 Capabilities: [50] Express Legacy Endpoint, MSI 00 Kernel driver in use: ahci Note that my wireless card is not showing, I have the Ralink 3390 card (which apparently does not show up on Ubuntu for some reason), however I am able to connect to wireless network and connect to the internet (when it is working)

  Read the article

• Remote tunning of jboss using visaulVM

  - by sagarzond

  Hi, I am using visualVM for tunning jboss remotly. I followed following step but unable to get JVM information in visualVM. Start jstatd server on remote machine where jboss running using command jstatd -p 1234 -J-Djava.security.policy=tools.policy In this tools.policy file is added to $JAVA_HOME/bin folder content of tools.policy file is - grant codebase "file:${java.home}/../lib/tools.jar" { permission java.security.AllPermission; }; Start visualVM remote connect on 1234 port using jstat I unable to get information of jboss plz help me........

  Read the article

• mysql service do not launch

  - by ted

  Sorry for my English; I was trying to create db with rake in RoR application that has been configured for MySQL(gem installed, settings changed). After that attempt mysql-server broke: d@calister:~$ mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) mysqld is not running at all: d@calister:~$ ps aux | grep mysql d 3769 0.0 0.0 4368 832 pts/0 S+ 18:03 0:00 grep --color=auto mysql And also it doesn't seem it would like to run: d@calister:~$ sudo service mysql start start: Job failed to start Any suggestions? Thanks EDIT: d@calister:~$ sudo -u mysql mysqld 120520 18:45:11 [Note] Plugin 'FEDERATED' is disabled. mysqld: Table 'mysql.plugin' doesn't exist 120520 18:45:11 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 120520 18:45:11 InnoDB: The InnoDB memory heap is disabled 120520 18:45:11 InnoDB: Mutexes and rw_locks use GCC atomic builtins 120520 18:45:11 InnoDB: Compressed tables use zlib 1.2.3.4 120520 18:45:11 InnoDB: Initializing buffer pool, size = 128.0M 120520 18:45:11 InnoDB: Completed initialization of buffer pool 120520 18:45:11 InnoDB: highest supported file format is Barracuda. 120520 18:45:12 InnoDB: Waiting for the background threads to start 120520 18:45:13 InnoDB: 1.1.8 started; log sequence number 1589459 120520 18:45:13 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.host' doesn't exist

  Read the article

• Cannot activate windows 7

  - by Charlie

  I can't activate Windows 7, I get an error saying DNS name does not exist. Is something configured incorrectly somewhere? PS: I need the answer within 13 days ;) UPDATE: I had upgraded from my company's Windows Vista build, and when I connect to the company VPN and activate I get a different error: The Software Licensing Service reported that the computer could not be activated. No Key Management Service (KMS) could be contacted. Please see the Application Event Log for additional information. The Application Event Log contains this (I took out the server name, it's one of the company servers): The client has sent an activation request to the key management service machine. Info: 0xC004F042, 0x00000000, xxxxxxxxxxxxxxxxxxxxxxxxx.com:1688, 7fbdc9b7-d654-49ed-80a7-81a34408f8dc, 2009/09/01 10:59, 0, 2, 17880, ae2ee509-1b34-41c0-acb7-6d4650168915, 25

  Read the article

• CentOS 6.5 proxy bypass/no_proxy not working

  - by Naruto Uzumaki

  I am running CentOS 6.5 on my desktop. I've set the Network Proxy using the network proxy application provided under Preferences. I've also set the following exceptions: localhost,127.0.0.0/8,172.16.0.0/12,192.168.0.0./16 But whenever I am using wget (I'm testing the proxy settings using using wget) then wget tries to connect to the proxy for private addresses, but wget localhost works fine and doesn't use the proxy. I also removed all the proxy settings and set the proxy in the shell: export http_proxy="<proxy_url>:<port>" export https_proxy="<proxy_url>:<port>" export no_proxy="localhost,127.0.0.0/8,172.16.0.0/12,192.168.0.0./16" It work when I use the command wget <external_url> or wget localhost but fails when I use the command wget <private address from the $no_proxy variable>. I also tried setting the variables in Ubuntu 14.04 also and facing the same issue. Regards,

  Read the article

• Load balance incoming traffic

  - by justin

  Dear All Please I have the following scenario. 3 servers voip / mail / terminal one load balancing router 2 internet connections (static ip`s) My concern is to load balance incoming traffic since the outgoing traffic is being taking care by the load balancing router. For instance all offices connect to the mail server via the internet same for voip and terminal services. The mail and voip clients are set up with one of the static ip`s and the router forwards the request to the appropriate server. But obviously like this there is no fail over nor load balancing cause all requests are being directed to one internet connection. Anyone has a suggestion was thing of a dns server, does this make sens ? or maybe a hosted option ? Thanks Justin

  Read the article

• How do I make my USB Bluetooth dongle work in Ubuntu 11.04 ? (Can't init device hci0: Connection timed out (110)) [closed]

  - by MaikoID

  I've a USB bluetooth dongle root@maiko-cce-lin:~# lsusb | grep Bluetooth Bus 001 Device 007: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) that isn't working properly, hardly-ever it works but stops working in my next reboot. what I've tried it isn't software blocked root@maiko-cce-lin:~# rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no my device is recognized by hciconfig root@maiko-cce-lin:~# hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: 00:1F:81:00:01:1C ACL MTU: 1021:4 SCO MTU: 180:1 DOWN RX bytes:330 acl:0 sco:0 events:8 errors:0 TX bytes:24 acl:0 sco:0 commands:30 errors:22 Features: 0xff 0x3e 0x09 0x76 0x80 0x01 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: Link mode: SLAVE ACCEPT but I can't turn on my hci interface root@maiko-cce-lin:~# hciconfig hci up Can't init device hci0: Connection timed out (110) I don't understand why.. the hcitool command doesn't show any device. root@maiko-cce-lin:~# hcitool dev Devices: I've tried to restart my bluetooth service too with this command and make all these previous commands again but without success. root@maiko-cce-lin:~# service bluetooth restart * Stopping bluetooth [ OK ] * Starting bluetooth [ OK ] root@maiko-cce-lin:~# The dongle works if you disconnect it from usb, wait a few seconds and connect it again. so there must be better solution for it ( a solution not involving physically removing the dongle!)

  Read the article

• Motorola SBG6850 / Linksys WRT54G network problem

  - by user96407

  I am trying to resolve issues with connecting my desktop and LAN capable printer to my network. I recently upgrade to the Motorola Cable Modem Gateway SBG6580 and have TWC coming into it, this works great for wired and wireless connectivity. Although, I am unable to connect to my device from this modem gateway. So, I am trying to cable a Linksys WRT54G (firmware 4.21.4 build 0) to the backside of the SBG6850 so I can use my printer on my network from both my wired desktop and wireless devices. I am pulling wireless off of the SBG6580 and do not want to change this. I have disable the wireless feature on the Linksys WRT54G at this moment. Can someone please help me through this dilemma? I am open to both wired and wireless solutions, but please tell me which approach your sharing in the first line of your response. Cheers!

  Read the article

• SQL Azure Service Issues &ndash; 10.27.2012 (Restored Now)

  - by ToStringTheory

  Please note that if you have a Windows Azure website, or use SQL Azure, your site may be experiencing downtime currently.  Notice I just called in regarding one of my public facing internet sites, because the site was failing to load anything but its error page, I couldn’t connect to the database to inspect application error logs, and the Windows Azure Management portal won’t load the SQL Azure extension. After speaking to the representative, he also mentioned that they were also having some problems updating the Service Dashboard which shows service up/down time, and for now, they are posting messages at http://account.windowsazure.com.  Please note that this issue may only be effecting certain regions.  Last, I may have misheard the representative, but he said that the outage was being categorized as a level 8, and if I heard correctly, I think he said that level 8 was the worst level.  I can’t say for sure on this though, because the phone connection to their support number was bad – large amounts of white noise. Good Luck! Update It appears that this outage may also be effecting the following services: SQL Database, Service Bus, Datamarket, Windows Azure Marketplace, Shared Caching, Access Control 2.0, and SQL Reporting. The note on the account page says for the South Central US region, however, I believe the representative I spoke to also mentioned North Central. As I said before though, the connection was bad. Update 2 My site regained connectivity about an hour ago, and it appears that the service dashboard is back in operation with correct status and history. It does appear that I misheard on the phone regarding multiple regions, so chances are this only effected a percentage of the platform. All in all, if this WAS their worst level of a problem, they really got it fixed and back up pretty fast. All in all, I understand that it is inherent for a complex system such as Azure to have ups and downs, but at the end of the day, I am still happy to support Azure to its fullest!

  Read the article

• Cannot import video from a DV camcorder over FireWire

  - by qbeuek

  I have a JVC GR-D320 miniDV camcorder that has a FireWire interface. I recently upgraded to Windows 7 RTM (64 bit, fresh installation). When I connect my camcorder through FireWire, I can see it in Device Manager without any warnings or problems, but I cannot capture videos from my miniDV tapes. After connecting, AutoPlay displays "Import Video could not find a compatible digital video device. Verify that the digital video device is properly connected and turned on." When using Windows Live Photo Gallery after selecting the import option, my camera is not listed. The camera used to work perfectly on the same hardware before upgrading to Windows 7 RTM 64 bit (it used to work fine on Windows XP SP3 32 bit). Googleing revealed that people had the exact same problems in Vista, but no solution was provided. Any help?

  Read the article

• Evolution Gmail Mashup + Fixing Time stamp

  - by Dan

  I wanted to migrate my university email (including subfolders) to my gmail account. Since gmail only imports POP3 which doesn't have subfolders, I had to connect to both gmail and my university mail using an email client (I am using Evolution) and then drag each folder from my university account to my gmail account. This worked for the most part, but the time stamp on every email I dragged over from my university account to gmail reads as todays date, when it was dragged over. If I enter the email and hit details it shows the actual sent date. How can I get it to not overwrite the received date when transferring? (as I assume this is what is happening). Thanks

  Read the article

• RDP Connection to XP from Windows 7 crashes part of XP

  - by flxkid

  I have some XP machines that I RDP into. If I RDP into the machine from something other than a Windows 7 box, and then RDP into the machine with a Windows 7 box, the XP machines crash (not BSOD though). I get an event ID 1003 with these details: Error code 1000008e, parameter1 c0000005, parameter2 bf85b6b7, parameter3 b6149a88, parameter4 00000000. I have this happening on quite a few machines, and I can reliably reproduce it. I've found no way to fix it. If I only connect from Windows 7 machines, it never fails. Any suggestions?

  Read the article

• Programmatically get the WLAN config of a machine and use netsh to setup new profile

  - by Maestro1024

  How can I programmatically get the wireless LAN configuration of a machine and use netsh to setup new profile? I am having trouble getting the netsh command to set the ssid of a new card. I installed the drivers and plugged it in. I see in ipconfig it says the "media is disconnected" (fair enough). I then send the following command netsh wlan connect name=profile1 ssid=myNetwork interface="Wireless Network Connection 2" problem is I get an error "There is no profile "profile1" assigned to the specified interface. What is a profile for a wireless card? What should I set it to? How can I get my SSID set and connected for the card?

  Read the article

• Win7 to Win7 Remote Desktop Not working, Xp to 7 working fine

  - by vlad b.

  Hello, I have a small home network and recently i tried to enable remote desktop for one of the pc's. I have a mix of Windows 7, Windows Vista and Xp runing alongside ubuntu, centos and others (some virtual, some real). I have a few Windows 7 pc`s that can be connected to using remote desktop from inside and outside the network (port redirects on routers, etc, etc) and some Xp ones. The trouble is when i tried to do the same thing to a Win7 laptop i discovered i can't connect to it from another win7 pc inside the home network. To sum it up Working: xp -- win7 not working: win7 -- win7 What i tried - disable and enable remote desktop (my computer - remote settings) - removing and adding users to the remote settings window - adding a new user to the machine, administrator or 'normal' user - checking the firewall settings on the machine and set 'allow' to remote desktop for both 'home/work' and 'public'networks Any tips on what should i do next? It displays ' .. secure connection' and after that the window with 'Your security credentials did not work' and it lets me try again with another user/password..

  Read the article

• Windows 7 Machine Makes Router Drop -All- Wireless Connections [closed]

  - by Hammer Bro.

  Note: I accidentally originally posted this question over at SuperUser, and I still think the issue is caused by some low-level networking practice of Windows 7, but I think the expertise here would be more apt to figuring it out. Apologies for the cross-post. Some background: My home network consists of my Desktop, a two-month old Windows 7 (x64) machine which is online most frequently (N-spec), as well as three other Windows XP laptops (all G) that only connect every now and then (one for work, one for Netflix, and the other for infrequent regular laptop uses). I used to have a Belkin F5D8236-4 wireless router, and everything worked great. A week ago, however, I found out that the Belkin absolutely in no way would establish a VPN connection, something that has become important for work. So I bought a Netgear WNR3500v2/U/L. The wireless was acting a little sketchy at first for just the Windows 7 machine, but I thought it had something to do with 802.11N and I was in a hurry so I just fished up an ethernet cable and disabled the computer's wireless. It has now become apparent, though, that whenever the Windows 7 machine is connected to the router, all wireless connections become unstable. I was using my work laptop for a solid six hours today with no trouble, having multiple SSH connections open over VPN and streaming internet radio in the background. Then, within two minutes of turning on this Windows 7 box, I had lost all connectivity over the wireless. And I was two feet away from the router. The same sort of thing happens on all of the other laptops -- Netflix can be playing stuff all weekend, but if I come up here and do things on this (W7) computer, the streaming will be dead within ten minutes. So here are my basic observations: If the Windows 7 machine is off, then all connections will have a Signal Strength of Very Good or Excellent and a Speed of 48-54 Mbps for an indefinite amount of time. Shortly after the Windows 7 machine is turned on, all wireless connections will experience a consistent decline in Speed down to 1.0 Mbps, eventually losing their connection entirely. These machines will continue to maintain 70% signal strength, as observed by themselves and router. Once dropped, a wireless connection will have difficulty reconnecting. And, if a connection manages to become established, it will quickly drop off again. The Windows 7 machine itself will continue to function just fine if it's using a wired connection, although it will experience these same issues over the wireless. All of the drivers and firmwares are up to date, and this happened both with the stock Netgear firmware as well as the (current) DD-WRT. What I've tried: Making sure each computer is being assigned a distinct IP. (They are.) Disabling UPnP and Stateful Packet Inspection on the router. Disabling Network Sharing, SSDP Discovery, TCP/IP NetBios Helper and Computer Browser services on the Windows 7 machine. Disabling QoS Packet Scheduler, IPv6, and Link Layer Topology Discovery options on my ethernet controller (leaving only Client for Microsoft Networks, File and Printer Sharing, and IPv4 enabled). What I think: It seems awfully similar to the problems discussed in detail at http://social.msdn.microsoft.com/Forums/en/wsk/thread/1064e397-9d9b-4ae2-bc8e-c8798e591915 (which was both the most relevant and concrete information I could dig up on the internet). I still think that something the Windows 7 IP stack (or just Operating System itself) is doing is giving the router fits. However, I could be wrong, because I have two key differences. One is that most instances of this problem are reported as the entire router dying or restarting, and mine still works just fine over the wired connection. The other is that it's a new router, tested with both the factory firmware and the (I assume) well-maintained DD-WRT project. Even if Windows 7 is still secretly sending IPv6 packets or the TCP Window Scaling implementation that I hear Vista caused some trouble with (even though I've tried my best to disable anything fancy), this router should support those functions. I don't want to get a new or a replacement router unless someone can convince me that this is a defective unit. But the problem seems too specific and predictable by my instincts to be a hardware hiccup. And I don't want to deal with the inevitable problems that always seem to take half a day to resolve when getting a new router, since I'm frantically working (including tomorrow) to complete a project by next week's deadline. Plus, I think in the worst case scenario, I could keep this router connected directly to the modem, disable its wireless entirely, and connect the old Belkin to it directly. That should allow me to still use VPN (although I'll have to plug my work laptop directly into that router), and then maintain wireless connections for all of the other computers. But that feels so wrong to me. Anyone have any ideas what the cause and possible solution could be? Clarifications: The Windows 7 machine is directly connected via an ethernet cable to the router for everything above. But while it is online, all other computers' wireless connections become unusable. It is not an issue of signal strength or interference -- no other devices within scanning range are using Channel 1, and the problem will affect computers that are literally feet away from the router with 95% signal strength.

  Read the article

• HP Compaq T20 Thin Clients & Windows Server 2008 R2: RDP Disconnects instantly.

  - by sinni800

  Hello, I have some HP Compaq T20 Thin Clients connecting to a Windows Server 2003. Now I want to upgrade to 2008 R2, so I tested a trial installation with remote desktop in administration mode. So I try to connect my T20 to the server and... It doesn't matter if I turn off encryption or not it disconnects with an generic error instantly. The T20s have Windows CE embedded with RDP 5.2 installed. Out of curiosity I tried Windows Server 2008 (no R2) and it worked! I tried the same with a Windows 7 machine set up with- no work. I can not update the T20s to Windows NT embedded for example because they only have a low amount of flash memory. It seems the "new" version of RDP coming from Windows 7 / Windows Server 2008 R2 is completely incompatible with the older 5.2 version. People are having the same problem here: http://social.technet.microsoft.com/Forums/en-US/winserverTS/thread/700488cd-a872-47e5-85a7-595f050afc10

  Read the article

• Podcast Show Notes: Red Room Interview &ndash; Part 3: Ninja BPM

  - by Bob Rhubart

  The third and final segment of my conversation with Red Room bloggers Sean Boiling, Richard Ward, and Mervin Chaing is now available. Listen to Part 1 Listen to Part 2 Listen to Part 3 As you’ll hear, this segment gets its title from another example of Mervin’s tactic for tweaking terminology to make it easier to sell stakeholders on certain SOA concepts. These are some very bright, very knowledgeable guys, so I encourage you to connect with them via the links below to pick their brains on any SOA or related issues that might have you reaching for the aspirin bottle. Sean Boiling - Sales Consulting Manager for Oracle Fusion Middleware LinkedIn | Twitter | Blog Richard Ward - SOA Channel Development Manager at Oracle LinkedIn | Blog Mervin Chiang - Consulting Principal at Leonardo Consulting LinkedIn | Twitter | Blog Once again, you’ll find the complete list of Red Room SOA Best Practice Posts in here. Up Next Next week’s program features another panel discussion recorded during a virtual min meet-up. The panel includes Oracle ACE Directors Mike van Alst (IT-Eye) and Jordan Braunstein (TUSC) along with The Definitive Guide to SOA: Oracle Service Bus author Jeff Davies. Stay tuned: RSS   Technorati Tags: oracle technology network,oracle,archbeat,podcast. arch2arch,soa,bpm del.icio.us Tags: oracle technology network,oracle,archbeat,podcast. arch2arch,soa,bpm

  Read the article

• ssh agent forwarding with many identities

  - by Eddified

  I have setup ssh agent forwarding, and I know it works. I also have many keys setup in the agent. The problem is there are so many keys that I get: Received disconnect from XXX.XXX.XXX.XXX: 2: Too many authentication failures for bob The way around this is to use IdentitiesOnly=yes so that ssh will only send the identity you want it to for the specified host. I've also gotten this implemented and I know it works, without agent forwarding. Now, I'm trying to combine the two features. That is, I want to use agent forwarding, but also be able to specify which identity to use when connecting. Problem is, I can't figure out how to do this. So, I want to connect from box A through box B to box C. Box A has all of the identity files and the ssh agent running. I want to edit box A or B's ssh config file(s) to use a specific identity that exists in box A's agent (which is being forwarded).

  Read the article

< Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >