Search Results

Search found 10050 results on 402 pages for 'graphics card'.

Page 365/402 | < Previous Page | 361 362 363 364 365 366 367 368 369 370 371 372  | Next Page >

• WiFi stops working after a while in Lenovo ThinkPad W520 (Ubuntu 12.04)

  - by el10780

  After several minutes(I do not know how many) there is no internet connection on my laptop via Wi-Fi.Ubuntu doesn't show any kind of message that my WiFi was disconnected neither there is a signal drop,but suddenly Firefox stops connecting to web pages.I checked my modem/router and it seems that it is working fine.I tried also to reboot the WiFi device and nothing happens.The only thing that it makes it work again is a reboot of the system and if I do not want to do a reboot then I am enforced to connect to the Internet using Ethernet cable.Does anybody know what is happening? ## Some Hardware info that might be helpful ## el10780@ThinkPad-W520:~$ sudo lshw -class network *-network description: Ethernet interface product: 82579LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 04 serial: f0:de:f1:f1:be:10 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.5.1-k duplex=full firmware=0.13-3 ip=192.168.0.10 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:50 memory:f3a00000-f3a1ffff memory:f3a2b000-f3a2bfff ioport:6080(size=32) *-network description: Wireless interface product: Centrino Advanced-N + WiMAX 6250 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 5e serial: 64:80:99:63:14:74 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=41.28.5.1 build 33926 ip=192.168.0.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:52 memory:f3900000-f3901fff *-network description: Ethernet interface physical id: 1 bus info: usb@2:1.3 logical name: wmx0 serial: 00:1d:e1:53:b2:e8 capabilities: ethernet physical configuration: driver=i2400m firmware=i6050-fw-usb-1.5.sbcf link=no el10780@ThinkPad-W520:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4) 00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) 03:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5e) 0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 08) 0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller (rev 04) 0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) el10780@ThinkPad-W520:~$ rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: i2400m-usb:2-1.3:1.0: WiMAX Soft blocked: yes Hard blocked: no The weirdest thing is this screenshot which I took after running the **Additional Drivers** program.I mean I have a NVidia Quadro 1000M and my Intel Centrino WiFi Card and this shows that there are not proprietay drivers for my system. http://imageshack.us/photo/my-images/268/screenshotfrom201207062.png/

  Read the article

• Going by the eBook

  - by Tony Davis

  The book and magazine publishing world is rapidly going digital, and the industry is faced with making drastic changes to their ways of doing business. The sudden take-up of digital readers by the book-buying public has surprised even the most technological-savvy of the industry. Printed books just aren't selling like they did. In contrast, eBooks are doing well. The ePub file format is the standard around which all publishers are converging. ePub is a standard for formatting book content, so that it can be reflowed for various devices, with their widely differing screen-sizes, and can be read offline. If you unzip an ePub file, you'll find familiar formats such as XML, XHTML and CSS. This is both a blessing and a curse. Whilst it is good to be able to use familiar technologies that have been developed to a level of considerable sophistication, it doesn't get us all the way to producing a viable publication. XHTML is a page-description language, not a book-description language, as we soon found out during our initial experiments, when trying to specify headers, footers, indexes and chaptering. As a result, it is difficult to predict how any particular eBook application will decide to render a book. There isn't even a consensus as to how the cover image is specified. All of this is awkward for the publisher. Each book must be created and revised in a form from which can be generated a whole range of 'printed media', from print books, to Mobi for kindles, ePub for most Tablets and SmartPhones, HTML for excerpted chapters on websites, and a plethora of other formats for other eBook readers, each with its own idiosyncrasies. In theory, if we can get our content into a clean, semantic XML form, such as DOCBOOKS, we can, from there, after every revision, perform a series of relatively simple XSLT transformations to output anything from a HTML article, to an ePub file for reading on an iPad, to an ICML file (an XML-based file format supported by the InDesign tool), ready for print publication. As always, however, the task looks bigger the closer you get to the detail. On the way to the utopian world of an XML-based book format that encompasses all the diverse requirements of the different publication media, ePub looks like a reasonable format to adopt. Its forthcoming support for HTML 5 and CSS 3, with ePub 3.0, means that features, such as widow-and-orphan controls, multi-column flow and multi-media graphics can be incorporated into eBooks. This starts to make it possible to build an "app-like" experience into the eBook and to free publishers to think of putting context before container; to think of what content is required, be it graphical, textual or audio, from the point of view of the user, rather than what's possible in a given, traditional book "Container". In the meantime, there is a gap between what publishers require and what current technology can provide and, of course building this app-like experience is far from plain sailing. Real portability between devices is still a big challenge, and achieving the sort of wizardry seen in the likes of Theodore Grey's "Elements" eBook will require some serious device-specific programming skills. Cheers, Tony.

  Read the article

• Ubuntu 12.04 host – Virtualbox 4.1.12 Guest=Windows 7 – Network will not connect

  - by user287529

  Ubuntu 12.04 host – Virtualbox 4.1.12 Guest=Windows 7 – Network will not connect. I'm using Ubuntu 12.04 on an Acer Aspire 5742-7645 laptop with 4GB memory, Intel Core i3 processor, Intel HD Graphics, DVD drive, 802.1 b/g/n, and 500 GB HD. I connect to my router via a wireless connection. I have installed Virutalbox 4.1.12 from the Ubuntu Software Center and installed Guest additions 4.1.12 in the Windows 7 guest session. I have Windows XP and Windows 7 installed as guests in Virtual box The network settings are different for XP and 7 – see below. Network Settings XP guest = Adapter 1: PCnet-FAST III (NAT) - Network works perfectly and has worked well for several years. Network Settings Win 7 = Adapter 1: Intel PRO/1000 MT Desktop (Bridged adapter, eth1) Promiscuous Mode = allow all Cable connected = checked When I originally installed Windows 7, I tried NAT and the guest network would not connect. Once I changed the setting to the above (Bridged) the Network worked perfectly. However, what I believe is after updates (not sure if it was an Ubuntu or Windows update) the guest network stopped working and I can not get it to connect. Interfaces file content auto lo iface lo inet loopback Ifconfig yields lou@lou-Aspire-5742:~$ ifconfig eth0 Link encap:Ethernet HWaddr 1c:75:08:09:f6:5c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 Link encap:Ethernet HWaddr 4c:0f:6e:7c:9f:01 inet addr:192.168.1.104 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::4e0f:6eff:fe7c:9f01/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:18095 errors:2 dropped:0 overruns:0 frame:24344 TX packets:9281 errors:47 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5301926 (5.3 MB) TX bytes:1441885 (1.4 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3208 errors:0 dropped:0 overruns:0 frame:0 TX packets:3208 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:294088 (294.0 KB) TX bytes:294088 (294.0 KB) Ipconfig yields the following: Windows IP Configuration Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::38ba:dbca:a21d:c3d1%13 Autoconfiguration IPv4 Address. . : 169.254.195.209 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : Tunnel adapter isatap.{B292E440-679D-4FC5-8E34-77D6804669C8}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 11: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : I'm not sure what else to do. Can someone provide the troubleshooting steps to determine what the problem is and possible solution?

  Read the article

• Animation Trouble with Java Swing Timer - Also, JFrame Will Not Exit_On_Close

  - by forgotton_semicolon

  So, I am using a Java Swing Timer because putting the animation code in a run() method of a Thread subclass caused an insane amount of flickering that is really a terrible experience for any video game player. Can anyone give me any tips on: Why there is no animation... Why the JFrame will not close when it is coded to Exit_On_Close 2 times My code is here: import java.awt.; import java.awt.event.; import javax.swing.*; import java.net.URL; //////////////////////////////////////////////////////////////// TFQ public class TFQ extends JFrame { DrawingsInSpace dis; //========================================================== constructor public TFQ() { dis = new DrawingsInSpace(); JPanel content = new JPanel(); content.setLayout(new FlowLayout()); this.setContentPane(dis); this.setDefaultCloseOperation(EXIT_ON_CLOSE); this.setTitle("Plasma_Orbs_Off_Orion"); this.setSize(500,500); this.pack(); //... Create timer which calls action listener every second.. // Use full package qualification for javax.swing.Timer // to avoid potential conflicts with java.util.Timer. javax.swing.Timer t = new javax.swing.Timer(500, new TimePhaseListener()); t.start(); } /////////////////////////////////////////////// inner class Listener thing class TimePhaseListener implements ActionListener, KeyListener { // counter int total; // loop control boolean Its_a_go = true; //position of our matrix int tf = -400; //sprite directions int Sprite_Direction; final int RIGHT = 1; final int LEFT = 2; //for obstacle Rectangle mega_obstacle = new Rectangle(200, 0, 20, HEIGHT); public void actionPerformed(ActionEvent e) { //... Whenever this is called, repaint the screen dis.repaint(); addKeyListener(this); while (Its_a_go) { try { dis.repaint(); if(Sprite_Direction == RIGHT) { dis.matrix.x += 2; } // end if i think if(Sprite_Direction == LEFT) { dis.matrix.x -= 2; } } catch(Exception ex) { System.out.println(ex); } } // end while i think } // end actionPerformed @Override public void keyPressed(KeyEvent arg0) { // TODO Auto-generated method stub } @Override public void keyReleased(KeyEvent arg0) { // TODO Auto-generated method stub } @Override public void keyTyped(KeyEvent event) { // TODO Auto-generated method stub if (event.getKeyChar()=='f'){ Sprite_Direction = RIGHT; System.out.println("matrix should be animating now "); System.out.println("current matrix position = " + dis.matrix.x); } if (event.getKeyChar()=='d') { Sprite_Direction = LEFT; System.out.println("matrix should be going in reverse"); System.out.println("current matrix position = " + dis.matrix.x); } } } //================================================================= main public static void main(String[] args) { JFrame SafetyPins = new TFQ(); SafetyPins.setVisible(true); SafetyPins.setSize(500,500); SafetyPins.setResizable(true); SafetyPins.setLocationRelativeTo(null); SafetyPins.setDefaultCloseOperation(EXIT_ON_CLOSE); } } class DrawingsInSpace extends JPanel { URL url1_plasma_orbs; URL url2_matrix; Image img1_plasma_orbs; Image img2_matrix; // for the plasma_orbs Rectangle bbb = new Rectangle(0,0, 0, 0); // for the matrix Rectangle matrix = new Rectangle(-400, 60, 430, 200); public DrawingsInSpace() { //load URLs try { url1_plasma_orbs = this.getClass().getResource("plasma_orbs.png"); url2_matrix = this.getClass().getResource("matrix.png"); } catch(Exception e) { System.out.println(e); } // attach the URLs to the images img1_plasma_orbs = Toolkit.getDefaultToolkit().getImage(url1_plasma_orbs); img2_matrix = Toolkit.getDefaultToolkit().getImage(url2_matrix); } public void paintComponent(Graphics g) { super.paintComponent(g); // draw the plasma_orbs g.drawImage(img1_plasma_orbs, bbb.x, bbb.y,this); //draw the matrix g.drawImage(img2_matrix, matrix.x, matrix.y, this); } } // end class enter code here

  Read the article

• Antenna Aligner Part 7: Connecting the dots

  - by Chris George

  The app is basically ready, so I eagerly started to sort out creating the application entry in iTunes Connect. It's mostly intuitive actually, although I did have to create yet another icon for iTunes sized 512x512 pixels, damn lucky I did the original graphics as vector! It took me longer to write the application description than anything else, I'm so not a tech author! I didn't like the way you have to 'make up' an SKU (Stock Keeping Unit) number. I have to do some googling to find out that it really doesn't matter what it is! It should be more obvious what to do from the actual website itself. That aside, the rest of it was actually fairly straightforward. As well as the details of the application, iPhone and iPad screenshots were also required. This posed somewhat of a problem. The iPhone ones were easy (as I have one!), but I do not (yet) own an iPad . So I thought I'd leave the iPad screenshots out for now. Once the application details were sorted, I moved onto the rights and pricing. At the start of the project I had made the decision that I wouldn't charge any more than the lowest amount £0.59. I believe there is a market for this, but as my first foray into app development I didn't want to take the mick. I did realise, however, that I had built my app with a developer certificate and provisioning profile. This was fairly quickly corrected, and again Nomad made this very easy to switch over to the distribution certificate and provisioning profile. With a sense of excitement I cracked open iTunes connect and clicked the upload button ... ...slight snag... . when the Nomad project was started, Apple allowed uploads of these binaries via iTunes Connect. But this is no longer possible, the only upload path is via the Application Loader available from the Apple Developer program. This itself has one limitation, it only runs on a mac! D'OH!!!  Actually my language was somewhat more colourful when this fact came to light. After picking my laptop up off the floor and putting it back together... ok only joking, but I did nearly throw it out of frustration!... I started to consider the options; I briefly entertained the idea of buying a cheap mac from ebay... no, that defeats the whole object of what I'm doing, plus my wife wouldn't be impressed there are some guys out there in the interweb who will upload your app for a small fee...but I don't really like the idea of giving some faceless email address my apple developer login details, as well as my app binary! find some willing friend with a mac who would kindly let me use it... obviously this is the only sensible option. In the meantime, I informed the Nomad team about this slight 'issue' and they are currently investigating possible solutions...

  Read the article

• What's wrong with my wireless?

  - by dazzle

  I am having issues with my wireless connection. My connection is constantly disconnecting, then attempting to reconnect, reconnecting momentarily, then disconnecting etc. on times scales that range from seconds to minutes. In the meantime, needless to say I'm having significant packet loss. I'm running Ubuntu 14.04 64bit, updated and upgraded to today. Here is my card and driver: delta@sager:~$ lspci -vq | grep -i wireless -B 1 -A 5 04:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73) Subsystem: Intel Corporation Dual Band Wireless-AC 7260 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at f7d00000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: iwlwifi Here is my kernel: delta@sager:~$ uname -r 3.13.0-34-generic None of the other machines on my home network are having these issues. Windows Vista is networking without issue for goodness sake ;-) Here is a small clipping from the output of dmesg. As you can see, I am getting a cfg80211 message of some sort over and over again (FYI, I've replaced my MAC address with a series of dashes, so anytime there is a ---------------, that was where the MAC address was: [ 1881.739161] wlan1: authenticate with --------------- [ 1881.741561] wlan1: send auth to --------------- (try 1/3) [ 1881.743440] wlan1: authenticated [ 1881.746027] wlan1: associate with --------------- (try 1/3) [ 1881.749244] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1881.754727] wlan1: associated [ 1881.754827] cfg80211: Calling CRDA for country: US [ 1881.761552] cfg80211: Regulatory domain changed to country: US [ 1881.761559] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1881.761564] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1881.761568] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1881.761571] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761574] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761577] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761580] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1881.761584] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1882.391038] cfg80211: Calling CRDA to update world regulatory domain [ 1882.396254] cfg80211: World regulatory domain updated: [ 1882.396260] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1882.396265] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396268] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396271] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1882.396274] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396277] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.148252] wlan1: authenticate with --------------- [ 1886.150005] wlan1: send auth to --------------- (try 1/3) [ 1886.151807] wlan1: authenticated [ 1886.154847] wlan1: associate with --------------- (try 1/3) [ 1886.158147] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1886.163464] wlan1: associated [ 1886.163520] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by --------------- [ 1886.163588] cfg80211: Calling CRDA for country: US [ 1886.170500] cfg80211: Regulatory domain changed to country: US [ 1886.170508] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1886.170513] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1886.170517] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1886.170520] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170523] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170526] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170529] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1886.170533] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1887.200197] cfg80211: Calling CRDA to update world regulatory domain [ 1887.203655] cfg80211: World regulatory domain updated: [ 1887.203659] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1887.203662] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203664] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203666] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1887.203668] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203670] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) I've poked around on AskUbuntu, and have not found any adequate solutions; have also found similar threads that were left unanswered. Any advice/experience/threads I might be able to pull on would be greatly appreciated. In your opinion, is this a kernel issue, hardware issue, etc.? Thanks in advance. EDIT: chili, here's the output of iwconfig: delta@sager:~$ iwconfig wlan1 IEEE 802.11abg ESSID:"LANbeforetime" Mode:Managed Frequency:2.412 GHz Access Point: ----------- Bit Rate=48 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=44/70 Signal level=-66 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:80 Missed beacon:0 eth0 no wireless extensions. lo no wireless extensions.

  Read the article

• std::vector::size with glDrawElements crashes?

  - by NoobScratcher

  ( win32 / OpenGL 3.3 / GLSL 330 ) I decided after a long time of trying to do a graphical user interface using just opengl graphics to go back to a gui toolkit and so in the process have had to port alot of my code to win32. But I have a problem with my glDrawElement function. my program compiles and runs fine until it gets to glDrawElements then crashes.. which is rather annoying right. so I was trying to figure out why and I found out its std::vector::size member not returning the correct amount of faces in the unsigned interger vector eg, "vector<unsigned int>faces; " so when I use cout << faces.size() << endl; I got 68 elements???? instead of 24 as you can see here in this .obj file: # Blender v2.61 (sub 0) OBJ File: '' # www.blender.org v 1.000000 -1.000000 -1.000000 v 1.000000 -1.000000 1.000000 v -1.000000 -1.000000 1.000000 v -1.000000 -1.000000 -1.000000 v 1.000000 1.000000 -0.999999 v 0.999999 1.000000 1.000001 v -1.000000 1.000000 1.000000 v -1.000000 1.000000 -1.000000 s off f 1 2 3 4 f 5 8 7 6 f 1 5 6 2 f 2 6 7 3 <--- 24 Faces not 68? f 3 7 8 4 f 5 1 4 8 I'm using a parser I created to get the faces/vertexes in my .obj file: char modelbuffer [20000]; int MAX_BUFF = 20000; unsigned int face[3]; FILE * pfile; pfile = fopen(szFileName, "rw"); while(fgets(modelbuffer, MAX_BUFF, pfile) != NULL) { if('v') { Point p; sscanf(modelbuffer, "v %f %f %f", &p.x, &p.y, &p.z); points.push_back(p); cout << " p.x = " << p.x << " p.y = " << p.y << " p.z = " << p.x << endl; } if('f') { sscanf(modelbuffer, "f %d %d %d %d", &face[0], &face[1], &face[2], &face[3]); cout << "face[0] = " << face[0] << " face[1] = " << face[1] << " face[2] = " << face[2] << " face[3] = " << face[3] << "\n"; faces.push_back(face[0] - 1); faces.push_back(face[1] - 1); faces.push_back(face[2] - 1); faces.push_back(face[3] - 1); cout << face[0] - 1 << face[1] - 1 << face[2] - 1 << face[3] - 1 << endl; } } using this struct to store the x,y,z positions also this vector was used with Point: vector<Point>points; struct Point { float x, y, z; }; If someone could tell me why its not working and how to fix it that would be awesome I also provide a pastebin to the full source code if you want a closer look. http://pastebin.com/gznYLVw7

  Read the article

• Upgraded to 12.04 now wifi doesn't work

  - by Benito Kestelman

  My laptop's wifi stopped working when I upgraded to Ubuntu 12.04 (wired works). I just reinstalled 12.04 over my old 12.04 on which wifi didn't work either in an attempt to restore any settings I may have accidentally changed, but it still doesn't work. I also used a wired connection to install updates in case this bug has been fixed, but it has not. Here is the result of sudo lshw -class network: *-network description: Wireless interface product: Centrino Wireless-N + WiMAX 6150 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 67 serial: 40:25:c2:5f:5b:f4 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-29-generic-pae firmware=41.28.5.1 build 33926 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:51 memory:de800000-de801fff *-network description: Ethernet interface product: AR8151 v2.0 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c0 serial: 14:da:e9:c0:da:78 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:54 memory:dd400000-dd43ffff ioport:a000(size=128) Here is rfkill list all: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: asus-wimax: WiMAX Soft blocked: no Hard blocked: no lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 8087:07d6 Intel Corp. Bus 001 Device 004: ID 13d3:5710 IMC Networks Bus 002 Device 003: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth Bus 003 Device 003: ID 0781:5530 SanDisk Corp. Cruzer lspci: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Network controller: Intel Corporation Centrino Wireless-N + WiMAX 6150 (rev 67) 03:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller 04:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0)

  Read the article

• How to fix: Ubuntu 12.04 reboots after loading with elilo

  - by Casey

  I have an HP p6-2120 with CPU: AMD A6-3620 APU with Radeon Graphics RAM: 6GB BIOS: HO2_710.ROM v7.10 [AMI v7.10 4/19/2012] Disk: SATA1 (/dev/sda) - 1 TB (windows) Disk: SATA2 (/dev/sdb) - 1 TB partitioned using "parted -a optimal /dev/sdb" as follows: .. 1049KB 201MB FAT32 boot flag set .. 201MB 60GB ext2 (/) .. 68GB 78GB linux-swap(v1) (swap) .. 78GB 790GB ext4 (/home) .. - rest is "free" space reserved for other purposes (eventually) ubuntu: 12.04.1 LTS [specifically: Release 12.04 (precise) 64-bit] kernel: linux 3.2.0-29-generic I created a bootable EFI USB from the ISO (64-bit) which I downloaded. I can run and install from the USB without any problems. The BIOS is an EFI bios that appears to be capable of booting in either EFI or Legacy mode. Initially, I did the "standard" install with NOTHING on disk2, and let the installer configure everything. The net result of this was that when I started the computer and forced it into "boot" menu mode, it DOES NOT recognize SATA2 as an EFI drive, and when I attempt to "legacy" boot from it, I get the message "ERROR: No Boot Disk has been detected." The "standard" install created one large partition that consumed the entire disk. At that point, I manually partitioned the disk (using sudo parted -a optimal /dev/sdb) as described above. I selected the "other" install, and changed the /dev/sdb1 to "bios_grub", /dev/sdb2 as "/" (ext4), /dev/sdb3 as swap, and /dev/sdb4 as "/home". [Note: fearing that possibly elilo did not recognize ext4, I switched /dev/sdb2 to ext2 and re-insalled] The net result was that the install appeared to trash the /dev/sdb1 partition so that it was NOT readable by anything. I re-formated /dev/sdb1 as FAT32 and set the boot flag. I repeated the install ignoring the messages about no bios_grub partition. After several attempts to get GRUB2 to work, I switched to elilo. I downloaded the most recent version and copied it (elilo-3.14-ia64.efi) to /dev/sdb1/efi/boot/bootx64.efi. (The BIOS boot loader did not recognize it either as elilo-3.14.ia64.efi or as elilo.efi. Based on the advice in one of the web-pages I found, I renamed it to bootx64.efi. This worked.) In that same directory (/efi/boot), I copied the file pointed to the link in /dev/sdb2/vmlinuz to /efi/boot/vmlinuz, and the file pointed to the link in /dev/sdb2/initrd.img to /efi/boot/initrd.img. I created an elilo.conf file as follows: timeout=5000 prompt default=linux-boot image=vmlinuz label=linux-boot read-only initrd=initrd.img root=/dev/sdb2 The /efi/boot directory contains 4 files: bootx64.efi elilo.conf vmlinuz initrd.img When I power-cycle the computer and force the boot menu, drive2 shows up as an EFI bootable drive. When I select it, I get the elilo prompt. Pressing , it appears to load the kernal (I have tried it with verbose=5, and there is a long string of messages with the final one a command line to load the kernel and a series of several dots that fly by) then the screen goes blank, and it reboots the computer. [Note: I have also tried substituting the UUID as found in the /etc/fstab of the installed system for the root directory. This had no effect.] This is a brief synopsis of several nights of fiddling with this. I would deeply appreciate any help you can give.

  Read the article

• Cloud Computing Pricing - It's like a Hotel

  - by BuckWoody

  I normally don't go into the economics or pricing side of Distributed Computing, but I've had a few friends that have been surprised by a bill lately and I wanted to quickly address at least one aspect of it. Most folks are used to buying software and owning it outright - like buying a car. We pay a lot for the car, and then we use it whenever we want. We think of the "cloud" services as a taxi - we'll just pay for the ride we take an no more. But it's not quite like that. It's actually more like a hotel. When you subscribe to Azure using a free offering like the MSDN subscription, you don't have to pay anything for the service. But when you create an instance of a Web or Compute Role, Storage, that sort of thing, you can think of the idea of checking into a hotel room. You get the key, you pay for the room. For Azure, using bandwidth, CPU and so on is billed just like it states in the Azure Portal. so in effect there is a cost for the service and then a cost to use it, like water or power or any other utility. Where this bit some folks is that they created an instance, played around with it, and then left it running. No one was using it, no one was on - so they thought they wouldn't be charged. But they were. It wasn't much, but it was a surprise.They had the hotel room key, but they weren't in the room, so to speak. To add to their frustration, they had to talk to someone on the phone to cancel the account. I understand the frustration. Although we have all this spelled out in the sign up area, not everyone has the time to read through all that. I get that. So why not make this easier? As an explanation, we bill for that time because the instance is still running, and we have to tie up resources to be available the second you want them, and that costs money. As far as being able to cancel from the portal, that's also something that needs to be clearer. You may not be aware that you can spin up instances using code - and so cancelling from the Portal would allow you to do the same thing. Since a mistake in code could erase all of your instances and the account, we make you call to make sure you're you and you really want to take it down. Not a perfect system by any means, but we'll evolve this as time goes on. For now, I wanted to make sure you're aware of what you should do. By the way, you don't have to cancel your whole account not to be billed. Just delete the instance from the portal and you won't be charged. You don't have to call anyone for that. And just FYI - you can download the SDK for Azure and never even hit the online version at all for learning and playing around. No sign-up, no credit card, PO, nothing like that. In fact, that's how I demo Azure all the time. Everything runs right on your laptop in an emulated environment.  

  Read the article

• Libgdx 2D Game, Random generated World of random size, how to get mouse coordinates?

  - by Solom

  I'm a noob and English is not my mothertongue, so please bear with me! I'm generating a map for a Sidescroller out of a 2D-array. That is, the array holds different values and I create blocks based on that value. Now, my problem is to match mouse coordinates on screen with the actual block the mouse is pointing at. public class GameScreen implements Screen { private static final int WIDTH = 100; private static final int HEIGHT = 70; private OrthographicCamera camera; private Rectangle glViewport; private Spritebatch spriteBatch; private Map map; private Block block; ... @Override public void show() { camera = new OrthographicCamera(WIDTH, HEIGHT); camera.position.set(WIDTH/2, HEIGHT/2, 0); glViewport = new Rectangle(0, 0, WIDTH, HEIGHT); map = new Map(16384, 256); map.printTileMap(); // Debugging only spriteBatch = new SpriteBatch(); } @Override public void render(float delta) { // Clear previous frame Gdx.gl.glClearColor(1, 1, 1, 1 ); Gdx.gl.glClear(GL20.GL_COLOR_BUFFER_BIT); GL30 gl = Gdx.graphics.getGL30(); // gl.glViewport((int) glViewport.x, (int) glViewport.y, (int) glViewport.width, (int) glViewport.height); spriteBatch.setProjectionMatrix(camera.combined); camera.update(); spriteBatch.begin(); // Draw Map this.drawMap(); // spriteBatch.flush(); spriteBatch.end(); } private void drawMap() { for(int a = 0; a < map.getHeight(); a++) { // Bounds check (y) if(camera.position.y + camera.viewportHeight < a)// || camera.position.y - camera.viewportHeight > a) break; for(int b = 0; b < map.getWidth(); b++) { // Bounds check (x) if(camera.position.x + camera.viewportWidth < b)// || camera.position.x > b) break; // Dynamic rendering via BlockManager int id = map.getTileMap()[a][b]; Block block = BlockManager.map.get(id); if(block != null) // Check if Air { block.setPosition(b, a); spriteBatch.draw(block.getTexture(), b, a, 1 ,1); } } } } As you can see, I don't use the viewport anywhere. Not sure if I need it somewhere down the road. So, the map is 16384 blocks wide. One block is 16 pixels in size. One of my naive approaches was this: if(Gdx.input.isButtonPressed(Input.Buttons.LEFT)) { Vector3 mousePos = new Vector3(); mousePos.set(Gdx.input.getX(), Gdx.input.getY(), 0); camera.unproject(mousePos); System.out.println(Math.round(mousePos.x)); // *16); // Debugging // TODO: round // map.getTileMap()[mousePos.x][mousePos.y] = 2; // Draw at mouse position } I confused myself somewhere down the road I fear. What I want to do is, update the "block" (or rather the information in the Map/2D-Array) so that in the next render() there is another block. Basically drawing on the spriteBatch g So if anyone could point me in the right direction this would be highly appreciated. Thanks!

  Read the article

• XNA 2D Board game - trouble with the cursor

  - by Adorjan

  I just have started making a simple 2D board game using XNA, but I got stuck at the movement of the cursor. This is my problem: I have a 10x10 table on with I should use a cursor to navigate. I simply made that table with the spriteBatch.Draw() function because I couldn't do it on another way. So here is what I did with the cursor: public override void LoadContent() { ... mutato.Position = new Vector2(X, Y); //X=103, Y=107; mutato.Sebesseg = 45; ... mutato.Initialize(content.Load<Texture2D>("cursor"),mutato.Position,mutato.Sebesseg); ... } public override void HandleInput(InputState input) { if (input == null) throw new ArgumentNullException("input"); // Look up inputs for the active player profile. int playerIndex = (int)ControllingPlayer.Value; KeyboardState keyboardState = input.CurrentKeyboardStates[playerIndex]; if (input.IsPauseGame(ControllingPlayer) || gamePadDisconnected) { ScreenManager.AddScreen(new PauseMenuScreen(), ControllingPlayer); } else { // Otherwise move the player position. if (keyboardState.IsKeyDown(Keys.Down)) { Y = (int)mutato.Position.Y + mutato.Move; } if (keyboardState.IsKeyDown(Keys.Up)) { Y = (int)mutato.Position.Y - mutato.Move; } if (keyboardState.IsKeyDown(Keys.Left)) { X = (int)mutato.Position.X - mutato.Move; } if (keyboardState.IsKeyDown(Keys.Right)) { X = (int)mutato.Position.X + mutato.Move; } } } public override void Draw(GameTime gameTime) { mutato.Draw(spriteBatch); } Here's the cursor's (mutato) class: using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Graphics; namespace Battleship.Components { class Cursor { public Texture2D Cursortexture; public Vector2 Position; public int Move; public void Initialize(Texture2D texture, Vector2 position,int move) { Cursortexture = texture; Position = position; Move = move; } public void Update() { } public void Draw(SpriteBatch spriteBatch) { spriteBatch.Draw(Cursortexture, Position, Color.White); } } } And here is a part of the InputState class where I think I should change something: public bool IsNewKeyPress(Keys key, PlayerIndex? controllingPlayer, out PlayerIndex playerIndex) { if (controllingPlayer.HasValue) { // Read input from the specified player. playerIndex = controllingPlayer.Value; int i = (int)playerIndex; return (CurrentKeyboardStates[i].IsKeyDown(key) && LastKeyboardStates[i].IsKeyUp(key)); } } If I leave the movement operation like this it doesn't have any sense: X = (int)mutato.Position.X - mutato.Move; However if I modify it to this: X = (int)mutato.Position.X--; it moves smoothly. Instead of this I need to move the cursor by fields (45 pixels), but I don't have any idea how to manage it.

  Read the article

• Paper-free Customer Engagement

  - by Michael Snow

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Appropriate repost from our friends at the AIIM blog: Digital Landfill -- John Mancini, supporting our mission of enabling customer engagement through better technology choices.  ---------- My wife didn't even give me a card for #wpfd - and they say husbands are bad at remembering anniversaries Well, today is the third World Paper Free Day.  I just got off the Tweet Jam, and there was a host of ideas for getting rid of -- or at least reducing -- paper. When we first started talking about "paper-free" most of the reasons raised to pursue this direction were "green" reasons.  I'm glad to see that the thinking has moved on to questions about how getting rid of paper and digitizing processes helps improve customer engagement.  And the bottom line.  And process responsiveness.  Not that the "green" reasons have gone away, but it's nice to see a maturation in the BUSINESS reasons to get rid of paper. Our World Paper Free Handbook (do not, do not, do not print it!) looks at how less paper in the workplace delivers significant benefits. Key findings show eliminating paper from processes can improve the responsiveness of customer service by 300 percent. Removing paper from business processes and moving content to PCs and tablets has the added advantage of helping companies adopt mobile-enable processes and eliminate elapsed time, lost forms, poor data and re-keying. To effectively mobile-enable processes and reduce reliance on paper, data should be captured as close to the point of origination as possible, which makes information easily available to whomever needs it, wherever they are, in the shortest time possible. This handbook summarizes the value of automating manual, paper-based processes. It then goes a step beyond to provide actionable steps that will set you on the path to productivity, profitability, and, yes, less paper.  Get your copy today and send the link around to your peers and colleagues.  Here's the link; please share it! http://www.aiim.org/Research-and-Publications/Research/AIIM-White-Papers/WPFD-Revolution-Handbook And don't miss out on the real world discussions about increasing engagement with WebCenter in new webinars being offered over the next couple of weeks:  October 30, 2012:  ResCare Solves Content Lifecycle Challenges with Oracle WebCenter November 1, 2012: WebCenter Content for Applications: Streamline Processes with Oracle WebCenter Content Management for Human Resources Applications Available On-Demand:  Using Oracle WebCenter to Content-Enable Your Business Applications

  Read the article

• Problem with boundary collision

  - by James Century

  The problem: When the player hits the left boundary he stops (this is exactly what I want), when he hits the right boundary. He continues until his rectangle's left boundary meets with the right boundary. Outcome: https://www.youtube.com/watch?v=yuJfIWZ_LL0&feature=youtu.be My Code public class Player extends GameObject{ BufferedImageLoader loader; Texture tex = Game.getInstance(); BufferedImage image; Animation playerWalkLeft; private HealthBarManager healthBar; private String username; private int width; private ManaBarManager manaBar; public Player(float x, float y, ObjectID ID) { super(x, y, ID, null); loader = new BufferedImageLoader(); playerWalkLeft = new Animation(5,tex.player[10],tex.player[11],tex.player[12],tex.player[13],tex.player[14],tex.player[15],tex.player[17],tex.player[18]); } public void tick(LinkedList<GameObject> object) { setX(getX()+velX); setY(getY()+velY); playerWalkLeft.runAnimation(); } public void render(Graphics g) { g.setColor(Color.BLACK); FontMetrics fm = g.getFontMetrics(g.getFont()); if(username != null) width = fm.stringWidth(username); if(username != null){ g.drawString(username,(int) x-width/2+15,(int) y); } if(velX != 0){ playerWalkLeft.drawAnimation(g, (int)x, (int)y); }else{ g.drawImage(tex.player[16], (int)x, (int)y, null); } g.setColor(Color.PINK); g.drawRect((int)x,(int)y,33,48); g.drawRect(0,0,(int)Game.getWalkableBounds().getWidth(), (int)Game.getWalkableBounds().getHeight()); } @SuppressWarnings("unused") private Image getCurrentImage() { return image; } public float getX() { return x; } public float getY() { return y; } public void setX(float x) { Rectangle gameBoundry = Game.getWalkableBounds(); if(x >= gameBoundry.getMinX() && x <= gameBoundry.getMaxX()){ this.x = x; } } public void setY(float y) { //IGNORE THE SetY please. this.y = y; } public float getVelX() { return velX; } public void setHealthBar(HealthBarManager healthBar){ this.healthBar = healthBar; } public HealthBarManager getHealthBar(){ return healthBar; } public float getVelY() { return velY; } public void setVelX(float velX) { this.velX = velX; } public void setVelY(float velY) { this.velY = velY; } public ObjectID getID() { return ID; } public void setUsername(String playerName) { this.username = playerName; } public String getUsername(){ return this.username; } public void setManaBar(ManaBarManager manaBar) { this.manaBar = manaBar; } public ManaBarManager getManaBar(){ return manaBar; } public int getLevel(){ return 1; } public boolean isPlayerInsideBoundry(float x, float y){ Rectangle boundry = Game.getWalkableBounds(); if(boundry.contains(x,y)){ return true; } return false; } } What I've tried: - Using a method that checks if the game boundary contains player boundary rectangle. This gave me the same result as what the check statement in my setX did.

  Read the article

• Pantech Link II, Ubuntu and Virtual XP

  - by user85041

  Okay this is my problem. I have a Pantech Link II, dmesg states: [ 896.072037] usb 2-3: new high-speed USB device number 3 using ehci_hcd [ 896.258562] cdc_acm 2-3:1.0: ttyACM0: USB ACM device [ 896.260039] usbcore: registered new interface driver cdc_acm [ 896.260042] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters Have it installed through wine (pc suite and driver) and it doesn't see it. Virtual XP through VMWare Player sees my device, knows it needs a driver. The removable devices says Curitel Pantech USB Device (Maybe Driver). I have PC Suite installed in XP, I install the driver through the executable.. it says problem with installing hardware, and then it disappears. Ubuntu sees it after restart, but if I start XP with that driver installed, it disappears from both and I get these errors in dmesg: [ 1047.760555] /dev/vmmon[2882]: PTSC: initialized at 3093322000 Hz using TSC, TSCs are synchronized. [ 1048.174033] /dev/vmmon[2882]: Monitor IPI vector: 0 [ 1055.293060] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1055.293074] /dev/vmnet: port on hub 8 successfully opened [ 1055.293088] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1055.293094] /dev/vmnet: port on hub 8 successfully opened [ 1072.446305] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1072.446316] /dev/vmnet: port on hub 8 successfully opened [ 1072.446328] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1072.446334] /dev/vmnet: port on hub 8 successfully opened [ 1072.856024] usb 1-1: reset high-speed USB device number 2 using ehci_hcd [ 1079.292024] usb 1-1: reset high-speed USB device number 2 using ehci_hcd [ 1079.732024] usb 1-1: reset high-speed USB device number 2 using ehci_hcd [ 1127.743034] NET: Registered protocol family 39 [ 1127.749320] [3163]: VMCI: IOCTL_VMCI_QUEUEPAIR_ALLOC (cid=1522210225,result=4). [ 1144.104031] usb 2-3: reset high-speed USB device number 3 using ehci_hcd [ 1144.412031] usb 2-3: reset high-speed USB device number 3 using ehci_hcd [ 1155.889976] ehci_hcd 0000:00:13.2: force halt; handshake ffffc90000642024 00004000 00000000 -> -110 [ 1155.889980] ehci_hcd 0000:00:13.2: HC died; cleaning up [ 1155.890008] usb 2-3: USB disconnect, device number 3 [ 1155.890013] usb 2-3: usbfs: usb_submit_urb returned -110 [ 1658.310777] [3163]: VMCI: IOCTL_VMCI_QUEUEPAIR_DETACH (cid=1522210225,result=3). [ 1658.392018] NET: Unregistered protocol family 39 [ 1666.546438] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1666.546450] /dev/vmnet: port on hub 8 successfully opened [ 1666.546462] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1666.546467] /dev/vmnet: port on hub 8 successfully opened [ 1671.431383] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1871:0101) [ 1671.432533] input: USB2.0 Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input13 lessa@X:~$ dmesg|tail [ 1155.890008] usb 2-3: USB disconnect, device number 3 [ 1155.890013] usb 2-3: usbfs: usb_submit_urb returned -110 [ 1658.310777] [3163]: VMCI: IOCTL_VMCI_QUEUEPAIR_DETACH (cid=1522210225,result=3). [ 1658.392018] NET: Unregistered protocol family 39 [ 1666.546438] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1666.546450] /dev/vmnet: port on hub 8 successfully opened [ 1666.546462] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1666.546467] /dev/vmnet: port on hub 8 successfully opened [ 1671.431383] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1871:0101) [ 1671.432533] input: USB2.0 Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input13 I have tried uninstalling, and installing manually from the device manager update driver while it's still has the warning sign.. it doesn't see the drivers as valid. No idea how to fix this.. would prefer to not have to go to another computer. I'm not trying to do anything but get the pictures off of it. I have to restart ubuntu, plug in device, for ubuntu to see it correctly again. I am like a month and a half old linux newbie so I have no idea the commands I could use for this, and I don't have a memory card in the phone to mount.

  Read the article

• Oracle at ARM TechCon

  - by Tori Wieldt

  ARM TechCon is a technical conference for hardware and software engineers, Oct. 30-Nov 1 in Santa Clara, California. Days two and three of the conference will be geared towards systems designers and software developers, those interested in building ARM processor-based modules, boards, and systems. It will cover all of the hardware and software, tools, ranging from low-power design, networking and connectivity, open source software, and security. Oracle is a sponsor of ARM TechCon, and will present three Java sessions and a hands-on-lab:  "Do You Like Coffee with Your Dessert? Java and the Raspberry Pi" - The Raspberry Pi, an ARM-powered single board computer running a full Linux distro off an SD card has caused a huge wave of interest among developers. This session looks at how Java can be used on a device such as this. Using Java SE for embedded devices and a port of JavaFX, the presentation includes a variety of demonstrations of what the Raspberry Pi is capable of. The Raspberry Pi also provides GPIO line access, and the session covers how this can be used from Java applications. Prepare to be amazed at what this tiny board can do. (Angela Caicedo, Java Evangelist) "Modernizing the Explosion of Advanced Microcontrollers with Embedded Java" - This session explains why Oracle Java ME Embedded is the right choice for building small, connected, and intelligent embedded solutions, such as industrial control applications, smart sensing, wireless connectivity, e-health, or general machine-to-machine (M2M) functionality---extending your business to new areas, driving efficiency, and reducing cost. The new Oracle Java ME Embedded product brings the benefits of Java technology to microcontroller platforms. It is a full-featured, complete, compliant software runtime with value-add features targeted to the embedded space and has the ability to interface with additional hardware components, remote manageability, and over-the-air software updates. It is accompanied by a feature-rich set of tools free of charge. (Fareed Suliman, Java Product Manager) "Embedded Java in Smart Energy and Healthcare" - This session covers embedded Java products and technologies that enable smart and connect devices in the Smart Energy and Healthcare/Medical industries. (speaker Kevin Lee) "Java SE Embedded Development on ARM Made Easy" - This Hands-on Lab aims to show that developers already familiar with the Java develop/debug/deploy lifecycle can apply those same skills to develop Java applications, using Java SE Embedded, on embedded devices. (speaker Jim Connors) In the Oracle booth #603, you can see the following demos: Industry Solutions with JavaThis exhibit consists of a number of industry solutions and how they can be powered by Java technology deployed on embedded systems.  Examples in consumer devices, home gateways, mobile health, smart energy, industrial control, and tablets all powered by applications running on the Java platform are shown.  Some of the solutions demonstrate the ability of Java to connect intelligent devices at the edge of the network to the datacenter or the cloud as a total end-to-end platform.Java in M2M with QualcommThis station will exhibit a new M2M solutions platform co-developed by Oracle and Qualcomm that enables wireless communications for embedded smart devices powered by Java, and share the types of industry solutions that are possible.  In addition, a new platform for wearable devices based on the ARM Cortex M3 platform is exhibited.Why Java for Embedded?Demonstration platforms will show how traditional development environments, tools, and Java programming skills can be used to create applications for embedded devices.  The advantages that Java provides because of  the runtime's abstraction of software from hardware, modularity and scalability, security, and application portability and manageability are shared with attendees. Drop by and see why Java is an optimal applications platform for embedded systems.

  Read the article

• Internet of Things Becoming Reality

  - by kristin.jellison

  The Internet of Things is not just on the radar—it’s becoming a reality. A globally connected continuum of devices and objects will unleash untold possibilities for businesses and the people they touch. But the “things” are only a small part of a much larger, integrated architecture. A great example of this comes from the healthcare industry. Imagine an expectant mother who needs to watch her blood pressure. She lives in a mountain village 100 miles away from medical attention. Luckily, she can use a small “wearable” device to monitor her status and wirelessly transmit the information to a healthcare hub in her village. Now, say the healthcare hub identifies that the expectant mother’s blood pressure is dangerously high. It sends a real-time alert to the patient’s wearable device, advising her to contact her doctor. It also pushes an alert with the patient’s historical data to the doctor’s tablet PC. He inserts a smart security card into the tablet to verify his identity. This ensures that only the right people have access to the patient’s data. Then, comparing the new data with the patient’s medical history, the doctor decides she needs urgent medical attention. GPS tracking devices on ambulances in the field identify and dispatch the closest one available. An alert also goes to the closest hospital with the necessary facilities. It sends real-time information on her condition directly from the ambulance. So when she arrives, they already have a treatment plan in place to ensure she gets the right care. The Internet of Things makes a huge difference for the patient. She receives personalized and responsive healthcare. But this technology also helps the businesses involved. The healthcare provider achieves a competitive advantage in its services. The hospital benefits from cost savings through more accurate treatment and better application of services. All of this, in turn, translates into savings on insurance claims. This is an ideal scenario for the Internet of Things—when all the devices integrate easily and when the relevant organizations have all the right systems in place. But in reality, that can be difficult to achieve. Core design principles are required to make the whole system work. Open standards allow these systems to talk to each other. Integrated security protects personal, financial, commercial and regulatory information. A reliable and highly available systems infrastructure is necessary to keep these systems running 24/7. If this system were just made up of separate components, it would be prohibitively complex and expensive for almost any organization. The solution is integration, and Oracle is leading the way. We’re developing converged solutions, not just from device to datacenter, but across devices, utilizing the Java platform, and through data acquisition and management, integration, analytics, security and decision-making. The Internet of Things (IoT) requires the predictable action and interaction of a potentially endless number of components. It’s in that convergence that the true value of the Internet of Things emerges. Partners who take the comprehensive view and choose to engage with the Internet of Things as a fully integrated platform stand to gain the most from the Internet of Things’ many opportunities. To discover what else Oracle is doing to connect the world, read about Oracle’s Internet of Things Platform. Learn how you can get involved as a partner by checking out the Oracle Java Knowledge Zone. Best regards, David Hicks

  Read the article

• No Wireless Networks, BCM4313 [duplicate]

  - by TalonPlz

  This question already has an answer here: How to Install Broadcom Wireless Drivers (BCM43xx) 38 answers Just bought this little Asus 10 inch laptop that came with Ubuntu 12.04. Everything at my home was fine: Wireless identified and connected. As soon as I went to my girlfriend's house the trouble started. I couldn't connect to wireless (authentication... times out and asks for authentication) I started doing internet searching, tried a few solutions posted on line using terminal commands. No solutions. I decided to upgraded to 12.10-13.04 and that left me with a worse problem: I can no longer see ANY networks what so ever. Wireless card is ON, with out a doubt. Wired connection works. I have been fumbling with driver versions to no .avail, and have no idea which driver I am currently running I have a vague idea of what terminal lines to run: lshw: resources: irq:17 memory:f7d00000-f7dfffff *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth2 version: 01 serial: dc:85:de:56:c4:ea width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.20.155.1 (r326264) latency=0 multicast=yes wireless=IEEE 802.11abg resources: irq:17 memory:f7d00000-f7d03fff iwconfig: eth1 no wireless extensions. eth2 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off lo no wireless extensions. I am new and excited to start my Ubuntu and Linux life and this is only the first of my few hic cups i am sure! :) Thanks all UPDATE: Report from 2nd answer talon@Black1015E:~$ sudo apt-get remove --purge bcmwl-kernel-source [sudo] password for talon: Reading package lists... Done Building dependency tree Reading state information... Done Package 'bcmwl-kernel-source' is not installed, so not removed 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. talon@Black1015E:~$ wget http://us.archive.ubuntu.com/ubuntu/pool/restricted/b/bcmwl/bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb --2013-10-22 18:50:32-- http://us.archive.ubuntu.com/ubuntu/pool/restricted/b/bcmwl/bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb Resolving us.archive.ubuntu.com (us.archive.ubuntu.com)... 2001:67c:1562::15, 2001:67c:1562::13, 2001:67c:1562::14, ... Connecting to us.archive.ubuntu.com (us.archive.ubuntu.com)|2001:67c:1562::15|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 1181334 (1.1M) [application/x-debian-package] Saving to: ‘bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb’ 100%[======================================>] 1,181,334 3.37MB/s in 0.3s 2013-10-22 18:50:33 (3.37 MB/s) - ‘bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb’ saved [1181334/1181334] talon@Black1015E:~$ arvh No command 'arvh' found, did you mean: Command 'arch' from package 'coreutils' (main) arvh: command not found talon@Black1015E:~$ arch x86_64 talon@Black1015E:~$ sudo dpkg -i bcmwl*.deb Selecting previously unselected package bcmwl-kernel-source. (Reading database ... 171895 files and directories currently installed.) Unpacking bcmwl-kernel-source (from bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb) ... Setting up bcmwl-kernel-source (5.100.82.112+bdcom-0ubuntu3) ... Loading new bcmwl-5.100.82.112+bdcom DKMS files... First Installation: checking all kernels... Building only for 3.8.0-32-generic Building for architecture x86_64 Building initial module for 3.8.0-32-generic Done. wl: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.8.0-32-generic/updates/dkms/ depmod........ DKMS: install completed. Error: Module b43 is not currently loaded Error: Module b43legacy is not currently loaded Error: Module ssb is not currently loaded Error: Module bcm43xx is not currently loaded Error: Module brcm80211 is not currently loaded Error: Module brcmfmac is not currently loaded update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.8.0-32-generic rebooting now

  Read the article

• MVC Communication Pattern

  - by Kedu

  This is kind of a follow up question to this http://stackoverflow.com/questions/23743285/model-view-controller-and-callbacks, but I wanted to post it separately, because its kind of a different topic. I'm working on a multiplayer cardgame for the Android platform. I split the project into MVC which fits the needs pretty good, but I'm currently stuck because I can't figure out a good way to communicate between the different parts. I have everything setup and working with the controller being a big state machine, which is called over and over from the gameloop, and calls getter methods from the GUI and the android/network part to get the input. The input itself in the GUI and network is set by inputlisteners that set a local variable which I read in the getter method. So far so good, this is working. But my problem is, the controller has to check every input separately,so if I want to add an input I have to check in which states its valid and call the getter method from all these states. This is not good, and lets the code look pretty ugly, makes additions uncomfortable and adds redundance. So what I've got from the question I mentioned above is that some kind of command or event pattern will fit my needs. What I want to do is to create a shared and threadsafe queue in the controller and instead of calling all these getter methods, I just check the queue for new input and proceed it. On the other side, the GUI and network don't have all these getters, but instead create an event or command and send it to the controller through, for example, observer/observable. Now my problem: I can't figure out a way, for these commands/events to fit a common interface (which the queue can store) and still transport different kind of data (button clicks, cards that are played, the player id the command comes from, synchronization data etc.). If I design the communication as command pattern, I have to stick all the information that is needed to execute the command into it when its created, that's impossible because the GUI or network has no knowledge of all the things the controller needs to execute stuff that needs to be done when for example a card is played. I thought about getting this stuff into the command when executing it. But over all the different commands I have, I would need all the information the controller has, and thus give the command a reference to the controller which would make everything in it public, which is real bad design I guess. So, I could try some kind of event pattern. I have to transport data in the event. So, like the command, I would have an interface, which all events have in common, and can be stored in the shared queue. I could create a big enum with all the different events that a are possible, save one of these enums in the actual event, and build a big switch case for the events, to proceed different stuff for different events. The problem here: I have different data for all the events. But I need a common interface, to store the events in a queue. How do I get the specific data, if I can only access the event through the interface? Even if that wouldn't be a problem, I'm creating another big switch case, which looks ugly, and when i want to add a new event, I have to create the event itself, the case, the enum, and the method that's called with the data. I could of course check the event with the enum and cast it to its type, so I can call event type specific methods that give me the data I need, but that looks like bad design too.

  Read the article

• Wireless connection works but the internet is too slow to use in Ubuntu 11.04

  - by Garrin

  The internet is so slow as to be unusable. And I'm not being picky. Even after minutes I can't get my Google home page to load. I tried installing a package through apt-get and was getting rates between 0 and a few hundred bytes/s. That's bytes, not kilobytes! Mostly 0 however (no exaggeration, it spends large amounts of time stalled). And I would go to a speed test web site of some kind but I can't since nothing will load. Briefly put, the laptop I am using was connected to two wireless networks while using Ubuntu 11.04 without any issues before this. It was also connected to a wired network without any issues. It dual boats Windows 7 which has never had any issues, not even with the current wireless network. Just to be clear, on the current wi-fi network, Windows 7 encounters no issues (speedtest.net puts the network speed at 1mb/s) but my network connection in Ubuntu 11.04 is so slow as to literally be unusable. I am unfamiliar with the router except for the fact that it boasts a Rogers logo (that's a large ISP/cable provider in Canada for those not familiar with the land of igloos and polar bears). I am far from the router and some desktop widget I use tells me the signal strength is at 58% (it seems fairly reliable and this would appear to match up with the filled bars in the network icon). I should also mention I'm just renting a room in this house so I'm not the network administrator and while I can access the 192.168.0.1 router page, the password wasn't set to 'password' so it's not much use to me. Here are a bunch of commands I ran which don't tell me a whole lot but I thought might be more instructive to the wise around here: lspci (just showing my network card): 05:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) This one is self explanatory. PING www.googele.com (216.65.41.185) 56(84) bytes of data. 64 bytes from nnw.net (216.65.41.185): icmp_req=1 ttl=51 time=267 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=2 ttl=51 time=190 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=3 ttl=51 time=212 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=4 ttl=51 time=207 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=5 ttl=51 time=220 ms --- www.googele.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4003ms rtt min/avg/max/mdev = 190.079/219.699/267.963/26.121 ms ifconfig eth0 Link encap:Ethernet HWaddr 20:6a:8a:02:20:da UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:960 (960.0 B) TX bytes:960 (960.0 B) wlan0 Link encap:Ethernet HWaddr 20:7c:8f:05:c6:bf inet addr:192.168.0.16 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::227c:8fff:fe05:c6bf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:982 errors:0 dropped:0 overruns:0 frame:0 TX packets:658 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:497250 (497.2 KB) TX bytes:95076 (95.0 KB) Thank you

  Read the article

• Planning development when academic research is involved

  - by Another Anonymous User

  Dear fellow programmers, how do you do "software planning" when academic research is involved? And, on a side note, how do you convince your boss that writing software is not like building a house and it's more like writing a novel? The gory details are below. I am in charge of a small dev team working in a research lab. We started developing a software with the purpose of going public one day (i.e. sell and make money off that). Such software depends on, amongst other things, at least two independent research lines: that is, there are at least two Ph.D. candidates that will, hopefully, one day come out with a working implementation of what we need. The main software depends also on other, more concrete resources that we as developers can take care of: graphics rendering, soft bodies deformation, etc. My boss asked me to write the specifications, requirements AND a bloody GANTT chart of the entire project. Faced with the fact that I don't have a clue about the research part, and that such research is fundamental for the software, he said "make assumptions." For the clarity of the argument, he is a professor whose Ph.D. students should come up with the research we need. And he comes from a strictly engineering background: plan everything first, write down specifications and only then write down code that "it's the last part". What I am doing now: I broke down the product in features; each 'feature' is, de facto, a separate product; Each feature is built on top of the previous one; Once a feature (A) has a working prototype the team can start working on the next feature (B), while QA for is being done for A (if money allows, more people can be brought in, etc.); Features that depend on research will come last: by then, hopefully, the research part will be completed (when is still a big question) ; Also, I set the team to use SCRUM for the development of 'version 1.0', due in a few months. This deadline could be set based on reasonable assumptions: we listed all required features, we counted our availability, and we gave a reasonable estimate. So my questions, again, are: How do I make my boss happy while at the same time get something out the door? How do I write specifications for something we -the developers- have no clue whether it's possible to do or not? (We still haven't decided which libraries to use for some tasks; we'll do so when we'll need to) How do I get the requirements for that, given that there are yet no clients nor investors, just lots of interests and promises? How do I get peace in the world? I am sure at least one of my questions will be answered :) ps: I am writing this anonymously since a potential investor might backfire if this is discovered. Hope you'll understand. However I must say I do not like this mentality of 'hiding the truth': this program will likely benefit many, and not being able to talk openly about this (with my name and my reputation attached) feels like censorship. But alas, I care more about your suggestions now.

  Read the article

• Wireless device bug on 13.10. BCM4313 registers as eth1 instead of wlan0 and no internet access

  - by user205691

  My Hotel wiFi requires me to login with a username & password after connecting to the hotspot. So, my browser would open a page with username & passwrd fields to login and then connect to internet. But unfortunately, firefox & chromium dont seem to work. i dont think it is browser related but a setting for the wifi router or driver which is creating this issue. using Broadcom 801.11 STA wireless driver (proprietary). tried open source as well but same result !! The image linked below shows my wifi connection setting & Chromium. The login page itself comes up after a long time and after entering the credentials, it keeps loading for ever !! it is the same case for every other browser.. so i dont think its browser issue but something to do with wifi setting or network manager stuff.. interestingly, i am able to connect to WiFi networks with WPA key without any issue. Adhoc hotspot is a problem and that is my regular home network :( .. I hope i can get some help solving this issue ! I have tried repeating the same hotspot after login from my android, by creating a virtual repeater with WPA key and it works. I can browse on ubuntu using this method.. but cant be doing this regularly ! I tried loading the same login page of the hotel wifi while browsing through my repeater wifi created on mobile and screen shot attached below. the page loads up quick and easy.. so this means something is wrong with the way network manager handles adhoc connectivity & login ?? i installed wicd0 but it crashes on startup and not helpful at all ! Screenshot of Chromium page Login page with repeated hotspot ifconfig in my terminal results: krishna@krishna-HP-ENVY-4-Notebook-PC:~$ ifconfig eth0 Link encap:Ethernet HWaddr 28:92:4a:1d:54:fa UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr e0:06:e6:89:fa:49 inet addr:10.24.1.71 Bcast:10.24.1.255 Mask:255.255.255.0 inet6 addr: fe80::e206:e6ff:fe89:fa49/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10940 errors:0 dropped:0 overruns:0 frame:348431 TX packets:6611 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7669631 (7.6 MB) TX bytes:864195 (864.1 KB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2146 errors:0 dropped:0 overruns:0 frame:0 TX packets:2146 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:166120 (166.1 KB) TX bytes:166120 (166.1 KB) I wonder why is the wireless configured under eth1 ? I think this is a bug with earlier ubuntu versions, but is this normal in 13.10 or is there a wrong configuration here ? The wireless device in my pc is BCM4313 and i have installed the bcmwl-kernel-sources, wireless-tools to support the device. i also reinstalled the bcmwl-kernel as suggested on broadcom website, via synaptic package manager. Nothing has changed this situation ! I tried booting into liveUSB and then ifconfig results show wireless under wlan0. But then the wireless connects and loads the login page. So is the problem with the device configuration now ? i really want to get this fixed before i start configuring the other stuff like ATI graphics and such on the laptop for overheating.. lack of internet access is too bad a bug for me :P any help is appreciated!

  Read the article

• Drivers for Atheros AR928X?

  - by Pato7

  I am new in Ubuntu and I had a big trouble with wifi. My ubuntu 12.10 doesn't detect my wifi card and I can't toggle the "activate wireless" option on the tasks bar (it is grey). I searched for drivers to make it work, but nothing worked for me. Can anyone give me a hand? Many thanks in advanced! lspci output 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8057 PCI-E Gigabit Ethernet Controller (rev 10) 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) 0c:03.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 0c:03.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 0c:03.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) lshw -c network output *-network descripción: Ethernet interface producto: 88E8057 PCI-E Gigabit Ethernet Controller fabricante: Marvell Technology Group Ltd. id físico: 0 información del bus: pci@0000:02:00.0 nombre lógico: eth0 versión: 10 serie: 00:24:be:83:b2:4f tamaño: 100Mbit/s capacidad: 1Gbit/s anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuración: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full ip=192.168.1.123 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s recursos: irq:45 memoria:d3520000-d3523fff ioport:c000(size=256) memoria:d3500000-d351ffff *-network DESACTIVADO descripción: Interfaz inalámbrica producto: AR928X Wireless Network Adapter (PCI-Express) fabricante: Atheros Communications Inc. id físico: 0 información del bus: pci@0000:03:00.0 nombre lógico: wlan0 versión: 01 serie: 2c:81:58:e6:b6:03 anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuración: broadcast=yes driver=ath9k driverversion=3.5.0-18-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn recursos: irq:17 memoria:d2100000-d210ffff rfkill list all output 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes 1: sony-wifi: Wireless LAN Soft blocked: yes Hard blocked: no

  Read the article

• Moving StarterSTS to the (Azure) Cloud

  - by Your DisplayName here!

  Quite some people asked me about an Azure version of StarterSTS. While I kinda knew what I had to do to make the move, I couldn’t find the time. Until recently. This blog post briefly documents the necessary changes and design decisions for the next version of StarterSTS which will work both on-premise and on Azure. Provider Fortunately StarterSTS is already based on the idea of “providers”. Authentication, roles and claims generation is based on the standard ASP.NET provider infrastructure. This makes the migration to different data stores less painful. In my case I simply moved the ASP.NET provider database to SQL Azure and still use the standard SQL Server based membership, roles and profile provider. In addition StarterSTS has its own providers to abstract resource access for certificates, relying party registration, client certificate registration and delegation. So I only had to provide new implementations. Signing and SSL keys now go in the Azure certificate store and user mappings (client certificates and delegation settings) have been moved to Azure table storage. The one thing I didn’t anticipate when I originally wrote StarterSTS was the need to also encapsulate configuration. Currently configuration is “locked” to the standard .NET configuration system. The new version will have a pluggable SettingsProvider with versions for .NET configuration as well as Azure service configuration. If you want to externalize these settings into e.g. a database, it is now just a matter of supplying a corresponding provider. Moving between the on-premise and Azure version will be just a matter of using different providers. URL Handling Another thing that’s substantially different on Azure (and load balanced scenarios in general) is the handling of URLs. In farm scenarios, the standard APIs like ASP.NET’s Request.Url return the current (internal) machine name, but you typically need the address of the external facing load balancer. There’s a hotfix for WCF 3.5 (included in v4) that fixes this for WCF metadata. This was accomplished by using the HTTP Host header to generate URLs instead of the local machine name. I now use the same approach for generating WS-Federation metadata as well as information card files. New Features I introduced a cache provider. Since we now have slightly more expensive lookups (e.g. relying party data from table storage), it makes sense to cache certain data in the front end. The default implementation uses the ASP.NET web cache and can be easily extended to use products like memcached or AppFabric Caching. Starting with the relying party provider, I now also provide a read/write interface. This allows building management interfaces on top of this provider. I also include a (very) simple web page that allows working with the relying party provider data. I guess I will use the same approach for other providers in the future as well. I am also doing some work on the tracing and health monitoring area. Especially important for the Azure version. Stay tuned.

  Read the article

• Gnome-shell fails to load on 12.10

  - by Githlar

  I'm usually the one answering questions, but in this I'm throughly stumped! My Setup: Ubuntu 12.10 (Dist upgrade form 12.04) ATI M96 [Mobility Radeon HD 4650] Upon the first installation of 12.10 I had all kinds of issues getting the Legacy ATI drivers to install (I guess the source for the drivers isn't kosher with kernel 3.5). So, I added the repository ppa:makson96/fglrx - which has a version of the ATI source patched to work with kernel 3.5. After installation of fglrx-legacy from that PPA, gnome-shell and all my graphics work fine... until today. The Problem I unsuspended my computer today and the screen was black (not off, the black from the gnome lock screen). I'd move my mouse/hit a key and the background would flash and then it'd go back to black. Restarted via VT1 Logged into Gnome (gnome-shell) session, but no gnome-shell! Investigation: First, I went to VT1 and tried export DISPLAY=:0;gnome-shell --replace. It appeared to work fine, switch back to X and nothing. Went back to VT1 and saw this error message: JS ERROR: !!! Exception was: TypeError: Object 0x7fc748129c30 is not a subclass of (null), it's a xO JS ERROR: !!! message = '"Object 0x7fc748129c30 is not a subclass of (null), it's a xO"' JS ERROR: !!! fileName = '"/usr/share/gnome-shell/js/ui/tweener.js"' JS ERROR: !!! lineNumber = '218' JS ERROR: !!! stack = '"()@/usr/share/gnome-shell/js/ui/tweener.js:218 wrapper()@/usr/share/gjs-1.0/lang.js:204 ()@/usr/share/gjs-1.0/lang.js:145 ()@/usr/share/gjs-1.0/lang.js:239 init()@/usr/share/gnome-shell/js/ui/tweener.js:49 init()@/usr/share/gnome-shell/js/ui/environment.js:96 @<main>:1 "' Window manager warning: Log level 32: Execution of main.js threw exception: TypeError: Object 0x7fc748129c30 is not a subclass of (null), it's a xO Note: Everywhere it says "it's a xO", xO is actually garbled and changes every time (I'm thinking memory corruption?) This error is thrown by line 96 of /usr/share/gnome-shell/js/ui/environment.js: tweener.Init() Did a purge of fglrx-legacy, reboot, reinstall fglrx-legacy, reboot... same thing. Did a ppa-purge of ppa:gnome3-team/gnome3, and reinstalled gnome-shell and ubuntu-desktop from the standard repositores... same thing. I'm really at a loss here. I love gnome-shell and after using it for nearly a year now gnome classic just seems so archaic. Additional Information Apt log from the day I first suspended my machine (these are upgrades from the gnome3-team/gnome3 ppa and ubuntu-wine/ppa ppa): Start-Date: 2012-11-24 17:30:28 Commandline: aptdaemon role='role-commit-packages' sender=':1.618' Install: gkbd-capplet:amd64 (3.6.0-0ubuntu1), gnome-control-center-unity:amd64 (1.0-0ubuntu1~ubuntu12.10.1) Upgrade: nautilus:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1), libgnome-control-center1:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), wine1.5-i386:i386 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), wine1.5:amd64 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), gnome-settings-daemon:amd64 (3.4.2-0ubuntu14, 3.6.3-0ubuntu1~ubuntu12.10.1), gnome-control-center-data:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), gnome-accessibility-themes:amd64 (3.6.0.2-0ubuntu1, 3.6.2-0ubuntu2~ubuntu12.10.1), gnome-themes-standard:amd64 (3.6.0.2-0ubuntu1, 3.6.2-0ubuntu2~ubuntu12.10.1), wine1.5-amd64:amd64 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), nautilus-data:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1), gnome-control-center:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), libnautilus-extension1a:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1) End-Date: 2012-11-24 17:31:32 fglrxinfo (driver appears to be working): display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Mobility Radeon HD 4650 OpenGL version string: 3.3.11653 Compatibility Profile Context Does anybody have any further ideas?

  Read the article

< Previous Page | 361 362 363 364 365 366 367 368 369 370 371 372  | Next Page >