Search Results

Search found 11973 results on 479 pages for 'ip conflict'.

Page 369/479 | < Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >

• Which is the cheapest machine where I can run linux and plug in some webcams? (and with network inte

  - by marc.riera

  I'm looking for a very cheap machine to run a linux distro for security(anti-thief) software. I would like to be able to connect to the network and a couple of webcams. May be ip-webcams or usb-webcams. The idea is having a machine with batteryes, laptop style, but there is no need to have a display/monitor attatched all the time. I'm planning to spend no more than 200$, in case it also gets stolen. Any advice on what to buy? (all modifications to this security plan are welcome) Thanks.

  Read the article

• Allowing ssh in iptables

  - by sat

  I am doing iptables firewall configuration. Actually, I need to allow ssh connection only from particular IP. But, It is blocking the ssh connection. I used the below commands. sat:~# iptables -F sat:~# iptables -A INPUT -p tcp -s src_ip_address -d my_ip_address --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT sat:~# iptables -A INPUT -j DROP sat:~# iptables -nL Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- src_ip_address my_ip_address tcp dpt:22 state NEW,ESTABLISHED DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination If I try to connect from src_ip_address to my_ip_address, it is blocking the connection. Even, It is blocking from my_ip_address to src_ip_address . I haven't put any rules for OUTPUT chain. What is wrong with my commands? How to allow ssh in iptables?

  Read the article

• Upgraded to Mountain Lion, now 127.0.0.1 is not resolving

  - by Shanimal

  I used to be able to type 127.0.0.1 (or my network IP 10.10.53.32) and it would resolve to my "default" virtual host. 127.0.0.1/~Shanimal and shanimal.dev both resolve to their appropriate folders. localhost and 127.0.0.1 give me a 404 - "Not Found The requested URL / was not found on this server." Basically, my "It works!" screen no longer works. /private/etc/apache2/Shanimal.conf: <Directory "/Users/Shanimal/Sites/_www"> Options Indexes Multiviews AllowOverride AuthConfig Limit Order allow,deny Allow from all </Directory> hosts: 127.0.0.1 localhost 127.0.0.1 shanimal.dev

  Read the article

• Access from one VM to an Other

  - by meo

  I got a Linux VM Image from a dev in our company to develop on it. This works nice, but now i need to do some Internet Explorer testing, for that i have an other VM with windows on it. I have an entry in my hosts file under macos that redirect some virtual domain to the IP of the linux VM. I tried to modify the hosts file in windows also. But i cant reach Linux VM. How can i access the Server on the linux VM with Windows VM? Are there some settings i missed?

  Read the article

• XP Clients can't copy to networkshare

  - by chewbacca76

  i have a windows 2003 domain where i have strange problem. One of our file shares is on a 2003r2 domain controller, xp clients trying to copy files on the share are always getting the error error copying file or folder filename could not be copied. path too long while windows 7 clients work fine. Nothing unusal is found in the eventlog on both the server and the client. It doesn't matter if i access the share by fqdn or ip, the path is including filename shorter than 20 characters i.e. \path\share\file.txt Copying files to other servers is fine. Reading from the shares is ok too. Happened from one day to the other, one windows update that was installed this day (kb2736233) was removed but nothing changed. thanks for any tips

  Read the article

• What are the pros of switching DNS names with a database server hardware upgrade?

  - by wilbbe01

  When we upgrade to new hardware at work we usually increment a number in the DNS name. For example. We have a server called database-2, that is slated to become database-3 in the coming days. I haven't been able to find a good reason why this is good behavior. To me the work of trying to catch all end user machines, as well as all servers dependent on the database server is far riskier than simply moving the database and ip/name with it to the new hardware. A little over a year ago we spent several months of requests coming in, as infrequent users began using software that needed to be updated to point to a new DNS name. I am struggling to find answers as to why this is a good practice. So the question. Why is using DNS names as a "server hardware version identifier" a good idea? What am I overlooking? Thanks much.

  Read the article

• Why can't my FreeBSD 6.1 (vmware player client under Win7) do DNS in Bridged mode.

  - by Walter Stickle

  I have a 64-bit FreeBSD 6.1 client, running under Windows 7 (64-bit) via VMWare player 3.0, with networking set to bridge mode. DHCP goes fine on boot... I get correct adress/gateway/nameserver info... I have good connectivity to the world in that I can ping any host I can name by IP addr, (including both of the nameservers in resolv.conf,) ...but I can't resolve any names. Inside the Windows box, the network interface has VMWare Bridge Protocol enabled, and the windows side of things has full connectivity. dig replies with: ;; connection timed out; no servers could be reached ...even if I use "dig @server_ip_addr" to point it at a pingable, working nameserver If I set VM networking to NAT mode, I can get outbound connectivity (with happy DNS) but, of course, can't do INBOUND connectivity, which I need. Thoughts?

  Read the article

• How to install stuff on Ubuntu

  - by Industrial

  Hi everyone, I have just launched my first EC2 instance and choosed a Ubuntu image to start from, since it's quite well documented. However, I am trying to install the Redis package: http://packages.ubuntu.com/lucid/redis-server Maybe I am not googling properly or just stupid since the weekend is approaching, but I'll keep getting errors: root@ip-10-229-123-199:~# sudo apt-get install redis-server Reading package lists... Done Building dependency tree... Done E: Couldn't find package redis-server I'll assume that I need to add a repository or something to Ubuntu to help it find the package I want, but how do I do it? I can only find graphical guides which doesnt help me too much since I am using SSH. Thanks alot!

  Read the article

• Is there a Linux mail server with an outgoing pickup directory?

  - by Paul D'Ambra

  On my Exchange server I can drop appropriately formatted text files in the "pickup" directory and Exchange will process them. I'd like to split this bulk mailing functionality onto another box to protect our business mail IP from the bumpy ride that our monthly newsletter gives us. I should note at this point that the mailing is opt-in with an opt out link included and only goes to people who pay to be a member of our organisation The ideal solution for me would be to add a linux box to use just for this purpose so we're not paying for Exchange licenses. So is there a linux equivalent of the Exchange pickup directory?

  Read the article

• Is there a Linux mail server with an outgoing pickup directory?

  - by Paul D'Ambra

  On my Exchange server I can drop appropriately formatted text files in the "pickup" directory and Exchange will process them. I'd like to split this bulk mailing functionality onto another box to protect our business mail IP from the bumpy ride that our monthly newsletter gives us. I should note at this point that the mailing is opt-in with an opt out link included and only goes to people who pay to be a member of our organisation The ideal solution for me would be to add a linux box to use just for this purpose so we're not paying for Exchange licenses. So is there a linux equivalent of the Exchange pickup directory?

  Read the article

• How can I redirect HTTPS(S) traffic to anothr gateway?

  - by PsyStyle

  I have a network like 192.168.0.0/15 with the default gateway set to 192.168.0.1. Al the workstations of the network use this gateway for all kind of accesses to the Internet. Now I am testing a new Internet connection with another provider and for this I am using a second gateway on the same subnet with 192.168.0.2 as IP address. I want to redirect only HTTP and HTTPS traffic to this second gateway without touching the address of the default gateway set inside every workstation. How can I accomplish this task? What I have to change inside the first's gateway firewall configuration or routes? I tried with a dnat like DNAT loc:192.168.0.1 loc:192.168.0.2 tcp 80 but nothing worked. I use Shorewall for simplicity in configuration but I can understand even theorical answers which I will try to adapt to my case

  Read the article

• What is the point of connecting two routers directly together

  - by rubixibuc

  The way subnets work, wouldn't connecting two router interfaces together require their own subnet between them. Unless that subnet mask has 31 bits, wouldn't that was adress space. I'm asking because I often seen that done in networking books. How can this be done without wasting IP Addresses? They usually draw this when explaining subnetting. They have a central router connected to several other each one supposed to be creating their own subnet. Is this really how subnettimg is done? Example <-------[Router 1]-----Wasteful Subnet-------[Router 2]------> | | | \/

  Read the article

• mod_security: How to allow ssh/http access for admin?

  - by mattesque

  I am going to be installing mod_security on my AWS EC2 Linux instance tonight and need a little help/reassurance. The only thing I am truly worried about right now is making sure my (admin) access to the instance and webserver is maintained w/o compromising security. I use ssh (port 22) and http (80) to access this and I've read horror stories from other EC2 users claiming they were locked out of their sites once they put up a firewall. So my question boils down to: What settings should I put in the mod_security conf file to make sure I can get in on those ports? IP at home is not static. (Hence the issue) Thanks so, so, so much.

  Read the article

• Finding a way to enter gmail in Company

  - by stckvrflw1

  Hello all, I am entering network over DNS's of my company. Here my company blocks lots of IP's for reasons like entertainment, sports, music, messaging boards etc. General e-mail is also one of those topics and I can't enter gmail.com. The proxy sites are also blocked in the company and the one's I have found (by spending much afford) are not accepting cookies. Also I am not able to enter the gmail from Igoogle too, this is also blocked. How can I enter gmail ? Thanks.

  Read the article

• Resolving Domainnames differently for different services

  - by mlaug

  Some time ago we had an issue with our network infrastructure and php with curl. Our Network infrastructure is fairly simple. LoadBalancer/Firewall = 5 servers The Domainname of our website is set to the ip of the Loadbalancer, of course. But calling curl from one of the servers did result in a timeout. It appears that a server could not call for its own domain it is serving. So we had to set the domains via /etc/hosts to the sever itself. But now We have implemented a Varnish in front of the Loadbalancer, which we want to automatically purge, once a change on a page happens. So now we need to call the domain www.example.com/url_to_purge. Sadly this call what be resolved to the server itself instead of the varnish, because of the /etc/hosts entries. So now I am wondering, if you could resolve domain names differently for different services :)

  Read the article

• Unable to run Django on Mac OS X

  - by cybervaldez

  I'm working with a Django project on my Mac (running Leopard) and I want to show it to my team. I've already passed the neccessary port forwards from my router to my Mac's LAN IP address but it doesn't work. I've also tried running the XAMPP server since that always worked with my Windows XP computer but it still doesn't work. Whenever I type my > it's showing a Page Load Error. Is this possibly an issue with an Mac OS X configuration that I need to setup first to allow my port forwards to get in? It's my first time to do this with Mac, perhaps I need to configure something else in network preferences?

  Read the article

• nginx load balance with IIS backend servers waiting Host header

  - by Elgreco08

  i have a ubuntu 10.04 with nginx /0.8.54 running as a load balance proxy named: www.local.com I have two IIS backend servers which responds on Host header request web1.local.com web2.local.com Problem: When i hit my nginx balancer on www.local.com my backend servers respond with the default server blank webpage (IIS default page) since they are waiting for a right host header (e.g. web1.local.com) my nginx.conf upstream backend { server web1.local.com:80; server web2.local.com:80; } server { listen 80; location / { proxy_pass http://backend; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $proxy_host; } } any hint ?

  Read the article

• How to set up server to be accessed from mobile devices [closed]

  - by Kgrover

  I need to set up a server that will eventually be accessed from an Android application. I don't have experience with how to go about this, but I've seen MySQL servers (Amazon EC2). I would need to store data on the server remotely (again, from a mobile device) and fetch it to display. What would be the best kind of server to use? I'm guessing I would only need around 50 GB of space. Is it possible to use a network drive and set that up as a remote server with an IP address? I would need to upload and extract data through java on Android. This is my first question on ServerFault, and I'm not sure if it's the appropriate forum. If not, please redirect me.

  Read the article

• How can WiFi access points recognize me?

  - by stephanos

  Due to heavy snowfall I was recently stranded on an airport. Having to do some surfing on my laptop I found an open access point. It offered 30 minutes of free surfing a day. I registered and used up my time. Then I wanted to see if I could use it again - mostly just for the fun of it. I opened a different browser then before and tried to register again. It didn't work. The access point recognized me and told me that I'd have to wait another day to get 30 free minutes again. I reconnected again to force a new IP - still the same. How did it recognize me?

  Read the article

• how to disable to automatic wireless interface up in ubuntu? [closed]

  - by Surjya Narayana Padhi

  On my laptop I have a built in wireless card and I got one external connected via usb. By ifconfig command I saw both the cards connects to internet and gets IP. eth1 - the interface my laptop has in-built wlan1 - I have connected externally via usb. Now I applied "sudo ifconfig eth1 down" so that i can use only wlan1. But this eth1 goes down for sometime and then come up again automatically. So I am not able to test my externally usb connected wifi adapter. Can anyone suggest me way to disable eth1 interface?

  Read the article

• Apache redirect some requests to another server

  - by mucie

  We just bought a new server. We want our old server to respond the https connections(because of ssl certificate) and new server to respond the rest. New server is ready but i don't know how to redirect requests to new one. mydomain.com => old machine ip 10.10.10.41 => new machine Requests will come through mydomain.com. If it is https: respond else redirect to 10.10.10.41 How should i configure apache for this situation?

  Read the article

• Is it possible to host a website with Apache HTTP through a ZyXEL EQ-660R modem and a Netgear WGT624v3 wireless router?

  - by Vortico

  Essentially, I have a spare desktop computer I'd like to turn into a web server, but my modem and wireless router are very difficult to work with. I installed Apache HTTP and successfully hosted a test page which can be accessed anywhere on the LAN. However, I'm having trouble setting up the server to be accessed from my external IP address. I was supplied with a ZyXEL EQ-660R DSL modem by my ISP (CenturyLink) and bought a Netgear WGT624v3 wireless router in which to connect my laptop and spare desktop. ZyXEL's website is no help, and I don't think much of the problem is with the Netgear router. I've played with many settings and have tried to forward port 80 from the modem, but I've had no luck. Could someone direct me toward a solution or recommendations for more promising hardware? Or should I admit defeat and explore other hobbies? :)

  Read the article

• parallel vms in VMWare Server - how to configure network so they can ping each other?

  - by IronGoofy

  I'm using VMWare Server (currently on Version 1.0.7) and have two VMs that I would like to run at the same time. However, I'm having problems in setting them up so they can ping each other. I've configured them to use 'Bridged' networking. They both obtain an IP address from the DHCP server on my network, but after that they can't ping each other. It seems that only the first one has a functioning network connection (I can ping it from the host machine and Internet connection works), but the other one does not. If it helps, both VMs are running XP SP 3. Any ideas? Thanks!

  Read the article

• How do I block my ISP from framing websites?

  - by PJB

  I've noticed recently, as of today, that all the websites I visit (except for a specific few sites such as Google) are all put into a frame. I'm not sure what the reason for this is, there are no ads displayed and everything appears normal. The only reason I found out is because the headers weren't loading correctly and none of the page titles showed up properly - I quickly checked the source code and saw that instead of the source of the page I was expecting to see, there was a single line with a frame. I first thought maybe somekind of trojan, but after going through various checks I've determined it's my ISP and/or somekind of Internet Registry (I traced the IP shown in the source code) What can be done to prevent this frame, short of using a VPN? I feel like I am being spied on. PS: I'm located in South Korea.

  Read the article

• JBoss basic access

  - by user101024

  I have JBoss 5 deployed on Solaris 10 - the servers connection has unrestricted high ports (1023) open to the internet. I can access the box via ssh & FTP from a second server on the same subnet and anywhere over the internet. JBoss is running over port 8080 and is accessible via http://locahost:8080 on the box itself. I cannot access it via http://ip.add.goes.here:8080 from either the other server on the same subnet or via the internet. Is there any service or configuration within JBoss or elsewhere on Solaris 10 that needs to be changed from default to allow http traffic to be served? Thanks, Kevin

  Read the article

< Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >