Search Results

Search found 11051 results on 443 pages for 'removable drive'.

Page 369/443 | < Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >

• Freeze on Boot WindowsXP

  - by kyle

  Ok first off I know I should have Windows 7 but i don't Its a really old computer and i'm not sure if it can run the latest OS of ubuntu but i'm trying any whay so here are my specs or what i could have gathered from the computer(viruses are every where and most of the drivers are gone) Specs OS WindowsXP(it isn't letting me know which one that is blocked) Graphics card(can't access device manger it is blocked also) graphics card is 2003-2004 era though ram 512mb last time i checked USB(Drivers Gone) Wireless Card(Drivers Gone) Lan Card(Drivers Gone) Audio(Drivers Gone) CD Drive (it runs and works but i can't check its properties that's blocked to) Computer Dell Inspiron 600m Good News I have the Driver CD for everything Bad News I Don't have the OS CD I know the Computer is trash but i want to flash it anyway and just install linux(ubuntu) The second problem is it doesn't even want to load the CD all the way it is just stuck at the Ubuntu Screen with all the bubbles orange and if i resart it just does it again. any help would be nice. EDIT: okay i tried the first comment and it said i need a firmware file from http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware the firmware is b43/ucode5.fw, b43-open/ucode5.fw is there any other way of installing this firmware without being in the Ubuntu because what I have read is I need to be in Ubuntu to do this... Thanks for all the help you are giving me i have read your comments but i don't want to wait another two hours downloading that if i can get it working on this...

  Read the article

• Deleted info in Boot folder

  - by user207984

  First off, I'm using Zorin 7 OS. So my Boot folder was too full to install any new updates, I used a tutorial I found somewhere on here to remove the unneeded linux-image files, and must of also deleted the latest one as well. Now when I attempt to boot I get error: no such partition. grub rescue> I used my MultiSystem USB to install (on a separate partition) a different Linux OS (Kali) and no longer get that error, however, it will ONLY give me the option to boot Kali Linux. Here's the biggest new problem though, I used the built in option of hard drive encryption for Zorin 7 when I initially installed it, so now when I attempt to explore it (to get all my saved data which is REALLY important to me), it asks me for password for encryption. However, the password says it in not recognized, and I know it's right, I had to type it in every single day. So I either need a way to restore my Zorin 7 boot files or GRUB or whatever, so I can boot it up... or I need to know how to fix my encryption problem to save all my info.

  Read the article

• Oracle Buys BigMachines - Adds Leading Configure, Price and Quote (CPQ) Cloud to the Oracle Cloud to Enable Smarter Selling

  - by Richard Lefebvre

  News Facts Oracle today announced that it has entered into an agreement to acquire BigMachines, a leading cloud-based Configure, Price and Quote (CPQ) solution provider. BigMachines’ CPQ Cloud accelerates the conversion of sales opportunities into revenue by automating the sales order process with guided selling, dynamic pricing, and an easy-to-use workflow approval process, accessible anywhere, on any device. Companies that use sales automation technology often rely on manual, cumbersome and disconnected processes to convert opportunities into orders. This creates errors, adds costs, delays revenue, and degrades the customer experience. BigMachines’ CPQ cloud extends sales automation to include the creation of an optimal quote, which enables sales personnel to easily configure and price complex products, select the best options, promotions and deal terms, and include up sell and renewals, all using automated workflows. In combination with Oracle’s enterprise-grade cloud solutions, including Marketing, Sales, Social, Commerce and Service Clouds, Oracle and BigMachines will create an end-to-end smarter selling cloud solution so sales personnel are more productive, customers are more satisfied, and companies grow revenue faster. More information on this announcement can be found at http://www.oracle.com/bigmachines Supporting Quotes “The fundamental goals of smarter selling are to provide sales teams with the information, access, and insights they need to maximize revenue opportunities and execute on all phases of the sales cycle,” said Thomas Kurian, Executive Vice President, Oracle Development. “By adding BigMachines’ CPQ Cloud to the Oracle Cloud, companies will be able to drive more revenue and increase customer satisfaction with a seamlessly integrated process across marketing and sales, pricing and quoting, and fulfillment and service.” “BigMachines has developed leading CPQ solutions that serve companies of all sizes across multiple industries,” said David Bonnette, BigMachines’ CEO. “Together with Oracle, we expect to provide a complete cloud solution to manage sales processes and deliver exceptional customer experiences.” Supporting Resources About Oracle and BigMachines General Presentation Customer and Partner Letter FAQ

  Read the article

• ubuntu live cd start up error

  - by Emiel

  First off, I'm new to the Linux scene. This is my first attempt to make a single boot installation for Ubuntu. I tried it for a few days in dual boot with win7 and I was sold, so i removed the tumor my pc had to endure for so long (sorry laptop) and installed Ubuntu from an usb boot device. My dual boot was as follows: Windows 7 was installed on partition C from hdd1, the windows installer for Ubuntu installed Ubuntu on partition I on that same hdd, hdd1. In the live cd installation I did the normal execution for removing windows and it said that after the installation my partition would be 320gb big, that is the total size of my hdd, so I automatically assumed that it would format my whole hdd. Now the installation has completed and it tells me to restart my system, and here comes the problem: now I get a dashing white cursor on my screen after the BIOS load and it won't budge... it just stands there and it doesn't move on or load Ubuntu, the system gets very hot at this point... Then I tried to reinstall using the same live CD, it is still on my USB drive, but when I boot from the USB, I get the error: no such file with some address and the a grub rescue. What to do? I can get hold of a win7 copy, but I don't really want to use that crap again... Thanks for helping me out. Kind regards, Emiel

  Read the article

• Velvet screen after grub selection

  - by Spleen

  After a fresh install of Ubuntu 11.10 64-bit, the boot seems to stop after selecting the ubuntu option (same with the rescue one) in the grub menu. At first I thought this was related to grub-efi, as I've had similar problems after a Ubuntu 11.04 update which replaced grub-efi with grub-pc and got me stuck on a "elf magic" grub console (https://bugs.launchpad.net/ubuntu/+source/apt/+bug/800910). While the 11.04 problem was resolved with a simple chroot and apt-get install from the live cd, that solution doesn't work this time. The drive with the bootloader is a sata3 ssd with 64 gb gpt (sdb1 20 mb efi boot partition fat16, sdb2 60 gb root ext4 and sdb3 4 gb swap) on a msi e350ia-e45 mainboard with a pair of 2 TB ext4 mbr drives for photos/music/movies. I've tried a few grub-install/update-grub with boot-directory sdb1 from chroot, but I cant seem to go anywhere. Even this guide: http://en.gentoo-wiki.com/wiki/Grub2#EFI (ofc I replaced grub2 with grub in the grub-install and efibootmgr commands) doesnt seem to get me anywhere. Any help or ideas are appeciated ;) edit: I guess its the combination of gpt/uefi that also seems to haunt f16 edit: same with 12.04 beta btw

  Read the article

• How to Upgrade Windows 7 Easily (And Understand Whether You Should)

  - by The Geek

  Just the other day I was trying to use Remote Desktop to connect from my laptop in the living room to the desktop downstairs, when I realized that I couldn’t do it because the desktop was running Windows Home Premium—that’s when I realized we’d never covered how to upgrade Windows, so here you are. You can upgrade from any version of Windows to the next version up, but it’s obviously going to cost a bit of money, and there’s a very good chance that you’ll have no reason to upgrade. Keep reading for the differences between the versions, whether you should bother upgrading, and how to actually do it Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 Take Better Panoramic Photos with Any Camera Make Creating App Tabs Easier in Firefox Peach and Zelda Discuss the Benefits and Perks of Being Kidnapped [Video] The Life of Gadgets in Price and Popularity [Infographic] Apture Highlights Turns Your Cursor into a Search Tool Add Classic Sci-Fi Goodness to Your Desktop with the Matrix Theme for Windows 7

  Read the article

• Just installed 13.10 and everything is fine except I cannot connect to the internet. Any thoughts?

  - by razorccatu

  I just installed Ubuntu 13.10 on my HP G62 laptop and the install went smoothly. I did the install off of a USB drive after trying ubuntu. While I was testing it, I connected to my Wireless with out issue and surfed a little. After the install, no wireless. I can still connect to my wireless network (at least it tells me I'm connected at full strength) but No servers can be found. I attempted to ping Google to no avail and I attempted to ping my router to no avail. I tried to then hard wire the machine and once again it told me that I was connected but I was not. When I ran dmesg, I got the following message: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolvabe. Please install nss-hostname! Is the hostname the issue? if so, how do I resolve it with out internet connection? If it's not the issue, how do I move forward? Thanks for any help. EDIT. I forgot to attach the image of my ifconfig if that might help.

  Read the article

• not being able to access any sudo function on my pc

  - by explorex

  Hi, I am not being to access any functions in my desktop and I don't have an OS besides Ubuntu 10.04 Lucid Linux and I am new to ubuntu. I think I rebooted my computer thinking that Google Chrome crashed. I opened Google Chrome but it showed opening message but never opened so I restarted my computer. and when my system was loading ('i was playing with keyboard dont know what I typed') and when by ubutnu loaded, I was unable to access anything some of characteristics are listed below I cannot hear any sound I cannot access wired ethernet connection on the right corner where I usually enable to access interne and I have no internet. There is no local apache server either. when ever I try to start apacer I get setuid must be root or something. When I type sudo then I get message setuid must be root. I cannot access orther external storage devices like pendrive and portable hard drive and cannot mount my other drives with FAT32 filesystem. When I try to start my apache webserver with out typing sudo then I get message cannnot open socket or something like it. EDIT:: i remember also doing command chown -R www-data / earlier and got error message EDIT:: and i cannot shutdown my computer, it only logs off

  Read the article

• JavaOne Technology Conference Is Coming to Russia

  - by Tori Wieldt

  JavaOne Russia 17-18 AprilRussian Academy of Sciences, MoscowRegister Now JavaOne and Oracle Develop 2012 Russia offers a wide variety of sessions, hands-on labs, keynotes, demos, and the opportunity to network with developer peers. If you’re looking for in-depth sessions on Java technologies and tools, this is the conference for you. Your registration also gets you into Oracle Develop sessions as well, so you can learn about application servers, cloud development and, of course, database development. The JavaOne Russia tracks are:Client-Side Technologies and Rich User ExperiencesLearn about developments in Java for the desktop and practices for building rich, immersive, and powerful user experiences across multiple hardware platforms and form factors. Core Java PlatformDiscover the latest innovations in Java virtual machines. Get deep technical explanations in security and networking and enhancements that allow dynamic programming languages to drive Java platform adoption. Java EE Web Profile, Platform Technologies, Web Services, and the Cloud Update your knowledge on topics such as Web application development, persistence, security, and transactions. This track will also address modularity, enterprise caching, Web sockets, and internet identity. Mobile, Java Card, Embedded, and DevicesThis track is devoted to Java technology as the ultimate platform for mobile computing. It also covers embedded and device usages of Java technologies, including Java SE, Java ME, Java Card, and JavaFX. Share this event: #oracleRU

  Read the article

• How do I boot to a windows recovery partition from GRUB in a Toshiba computer?

  - by Andy Groff

  This should be simple but I cannot figure out how to do it. I've been dual booting ubuntu and vista for a while. About 8 months ago, I realized my windows partition got corrupt and does not boot. This wasn't a problem since I didn't need it anyways, but now I do need windows. Using the disk manager I can see a partition called Toshiba System Volume which is 1.6 GB and one called HDD Recovery which is 7.8 GB. I assume the second one is what I need and i'm not sure what the first one is for. Anyways, how do I boot to this one? Is it a matter of configuring GRUB to boot to it? Once I do boot to it will it let me only reformat my windows partition, or is it going to restore the entire hard drive to factory condition? I assume I'll get the general windows installer which lets me choose the partition but, as you can probably tell, I've never used a recover partition. Should I burn the contents of the partition to a disk and boot to that? Sorry if this is obvious but I'm confused and cannot figure this out.

  Read the article

• Is there a NVIDIA driver (for a 7-series card) that will actually work for 12.10?

  - by DS13

  I see many similar topics on this, but I've tried all their suggestions, and nothing has worked. ISSUE: I do a clean install of Ubuntu 12.10. Boots fine with the “nouveau” graphics driver – graphics are very slow and choppy. The three other driver options in Ubuntu (official NVIDIA drivers), all result in a variation of the black screen on boot up. There will be NO access to a command line/GUI in anyway what-so-ever (tried every option recommended out there, but the system is unusable at this stage). I can only reinstall, and try different drivers…and I only ever get one shot at it. QUESTIONS: Does anyone know of a NVIDIA driver that will actually work with a Nvidia GeForce 7350LE? Or a 7-series card in general? This is my second computer, and I’m just trying to get a working install of Ubuntu on it. I don’t want to put much money into it, as I have seen Ubuntu run great on much older/less capable machines. I’ve got a decent Intel processor (2.3Ghz), 2GB of RAM, 320GB hard drive, 32-bit architecture, and there is no other O/S installed. It appears as if the graphics card is holding me back. Should I just buy a cheap graphics card (non-NVIDIA) to put in as a replacement? TRIED SO FAR: -all drivers available in Ubuntu *all fail -manual install of some different NVIDIA drivers *all fail -also tried installing the generic kernel, Nvidia driver doesn't work in 12.10 *no difference -every method suggested to at least get a command line after switching to a NVIDIA driver *all fail

  Read the article

• Incomplete Ubuntu 12.04 install dual-boot XP

  - by Mike

  This weekend has been the 1st time I've tried to install Ubuntu. On the initial install, (I am using a USB) the installation went all the way through and asked to restart when completed. I was not able to get grub to boot and kept going through Windows. After some research I found some articles on updating/reinstalling grub, so I followed those. I finally got grub to load after a day but there was no Windows option only the Ubuntu 12.04 which when I selected it only gave me a fatal error 17. I booted from the USB again and deleted the partitions and installed again. This time I got an error 15. I then booted through XP and downloaded the WUBI.exe and uninstalled Ubuntu and reinstalled again. The installation went to the very end and then gave an error message (which I don't remember exactly what it said) something along the lines of checking my logs on my C drive. I then uninstalled Ubuntu and removed the wubi.exe file and wiped my USB and did the download to the USB again. Booted through USB and ran the install process again. It again went through the install process but after creating username and password and hitting continue, the installation dialogue box disappears and the mouse spinning wheel is displayed, but I do not receive the prompt to restart. I can still access the side menu for Ubuntu but the wheel keeps spinning. How do I get Ubuntu to install properly?

  Read the article

• How can find out the device Id of my unmounted DVD?

  - by fred.bear

  When I put a DVD into the DVD drive, it appears in Nautilus Places, but is not automatically mounted. (this is by personal choice). In this unmounted state, mount (of course) reports nothing, and likewise for df.. but Nautilus is aware of the DVD hardware unit and has read the Label; which it shows in Places So it seems to me that Nautilus has already accessed the DVD devices (Did it temporarily mount it?)... The main point of my question was to determine how to find the device Id of an unmounted device .. but as I've been writing this, I now think it may not be as simple as that... This issue came up because I wanted to test this command cat iso-pieces.* | growisofs -Z /dev/dvd=/dev/stdin, but then realized that I didn't know how to get my DVD's device Id. ... and does the above command requires a mounted device, or does it write directly to the device? ... as you can see, I'm a bit vague about devices :) Come to think of it maybe Nautalus read the DVD device directly, because when all is said and done, something has to read/write directly to it. info growisofs says: Under Linux it will most likely be an ide-scsi device such as "/dev/scd0 How can I find this Id via a script?

  Read the article

• My home partition slowly fills up until the system is unable to complete even simple tasks

  - by user973810

  So I have an awesome configuration on my home pc. My /home directory has its own partition. My home partition slowly fills up until the system is unable to complete even simple tasks. For example, when this issue has occured, I can load up firefox. It just pops up an error message saying that it cannot be done. Rebooting solves the issue. The strange thing is, I've run baobab and it doesn't notice a problem. There should be hundreds of gigabytes of data somewhere, but it doesn't see it. Does anyone have any idea of how I might troubleshoot this issue? I'm thinking I could do lsof but I've always found the output of that to be too much information. Maybe my drive is, like, dying. Edit: is there a /home analog of /var that gets cleared out at boot time? Maybe I could check in there next time I notice this problem to see if I can divine what's up. Update: I found the issue. my .xsession-errors file is filling up with Authentication deferred - ignoring client message Is there a way I can see what is causing this error and fix it?

  Read the article

• What Software or tool to ease the building of an eye catching GUI (functional) [closed]

  - by CaBieberach

  I want to make a control panel that opens different files but I'm not sure what would be the right tool/Sw to make this. In the company we have about 30 files that we use almost every day. They are all related to each other. I would like to create a "Control panel" to ease the opening and searching of these files. Kind of a control panel with 30 buttons. The only duty of this control panel is to open one of the file selected by the user. I need this "Control Panel" to: Look GREAT Open very fast Could you please recomend me some tool/Sw to acomplish this. What tool or SW is specially focused to make stunning GUIs? Note: In the company We are all using MS Windos 7. Thanks for the help! EDIT: This would be a Stand alone program installed or saved in a network drive. Each person can open the porgram and it pops the GUI. Not for the web. "Looks GREAT" is definitively a subjective matter. I want something that gives me plenty options to display/modify the objetcs that compose the GUI. So i can experiment and find what looks and works the best.

  Read the article

• how can i find my usb2rs232 driver

  - by mefmef

  i have a device that is correctly connected to my PC . but i could not see it in /dev . what does it means? is it because of not installing my drive? $ /dev ls before connecting my device: agpgart mei sda1 tty28 tty59 ttyS30 autofs mem sda2 tty29 tty6 ttyS31 block net sda5 tty3 tty60 ttyS4 bsg network_latency sda6 tty30 tty61 ttyS5 btrfs-control network_throughput serial tty31 tty62 ttyS6 bus null sg0 tty32 tty63 ttyS7 char oldmem shm tty33 tty7 ttyS8 console parport0 snapshot tty34 tty8 ttyS9 core port snd tty35 tty9 ttyUSB0 cpu ppp stderr tty36 ttyprintk uinput cpu_dma_latency psaux stdin tty37 ttyS0 urandom disk ptmx stdout tty38 ttyS1 usbmon0 dri pts tty tty39 ttyS10 usbmon1 ecryptfs ram0 tty0 tty4 ttyS11 usbmon2 fb0 ram1 tty1 tty40 ttyS12 vcs fd ram10 tty10 tty41 ttyS13 vcs1 full ram11 tty11 tty42 ttyS14 vcs2 fuse ram12 tty12 tty43 ttyS15 vcs3 hidraw0 ram13 tty13 tty44 ttyS16 vcs4 hpet ram14 tty14 tty45 ttyS17 vcs5 input ram15 tty15 tty46 ttyS18 vcs6 kmsg ram2 tty16 tty47 ttyS19 vcsa log ram3 tty17 tty48 ttyS2 vcsa1 loop0 ram4 tty18 tty49 ttyS20 vcsa2 loop1 ram5 tty19 tty5 ttyS21 vcsa3 loop2 ram6 tty2 tty50 ttyS22 vcsa4 loop3 ram7 tty20 tty51 ttyS23 vcsa5 loop4 ram8 tty21 tty52 ttyS24 vcsa6 loop5 ram9 tty22 tty53 ttyS25 vga_arbiter loop6 random tty23 tty54 ttyS26 zero loop7 rfkill tty24 tty55 ttyS27 lp0 rtc tty25 tty56 ttyS28 mapper rtc0 tty26 tty57 ttyS29 mcelog sda tty27 tty58 ttyS3 $ /dev ls after connecting my device: agpgart mei sda1 tty28 tty59 ttyS30 autofs mem sda2 tty29 tty6 ttyS31 block net sda5 tty3 tty60 ttyS4 bsg network_latency sda6 tty30 tty61 ttyS5 btrfs-control network_throughput serial tty31 tty62 ttyS6 bus null sg0 tty32 tty63 ttyS7 char oldmem shm tty33 tty7 ttyS8 console parport0 snapshot tty34 tty8 ttyS9 core port snd tty35 tty9 ttyUSB0 cpu ppp stderr tty36 ttyprintk ttyUSB1 cpu_dma_latency psaux stdin tty37 ttyS0 uinput disk ptmx stdout tty38 ttyS1 urandom dri pts tty tty39 ttyS10 usbmon0 ecryptfs ram0 tty0 tty4 ttyS11 usbmon1 fb0 ram1 tty1 tty40 ttyS12 usbmon2 fd ram10 tty10 tty41 ttyS13 vcs full ram11 tty11 tty42 ttyS14 vcs1 fuse ram12 tty12 tty43 ttyS15 vcs2 hidraw0 ram13 tty13 tty44 ttyS16 vcs3 hpet ram14 tty14 tty45 ttyS17 vcs4 input ram15 tty15 tty46 ttyS18 vcs5 kmsg ram2 tty16 tty47 ttyS19 vcs6 log ram3 tty17 tty48 ttyS2 vcsa loop0 ram4 tty18 tty49 ttyS20 vcsa1 loop1 ram5 tty19 tty5 ttyS21 vcsa2 loop2 ram6 tty2 tty50 ttyS22 vcsa3 loop3 ram7 tty20 tty51 ttyS23 vcsa4 loop4 ram8 tty21 tty52 ttyS24 vcsa5 loop5 ram9 tty22 tty53 ttyS25 vcsa6 loop6 random tty23 tty54 ttyS26 vga_arbiter loop7 rfkill tty24 tty55 ttyS27 zero lp0 rtc tty25 tty56 ttyS28 mapper rtc0 tty26 tty57 ttyS29 mcelog sda tty27 tty58 ttyS3

  Read the article

• The SQL Server Setup Portal

  - by BuckWoody

  One of the tasks that takes a long time for the data professional is setting up SQL Server. No, it isn’t that difficult to slide a DVD in a drive and click “Setup” but the overall process of planning the hardware and software environment, making decisions for high-availability, security and dozens of other choices can make the process more difficult. And then, of course, there are the inevitable issues that arise. Microsoft supports literally hundreds and even thousands of combinations of hardware and software drivers from vendors you’ve never even heard of. Making all of that work together is a small miracle, so things are bound to arise that you need to deal with. So, to help you out, we’ve designed a new “SQL Server Setup Portal”. It’s a one-stop-shop for everything you need to know about planning and setting up SQL Server. As time goes on you’ll see even more content added. There are already whitepapers, videos, and multiple places to search on everything from topic names to error codes. So go check it out – and if you have to do a lot of SQL Server Setups – and especially if you don’t – bookmark it as a favorite! Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• is wisdom of what happens 'behind scenes' (in compiler, external DLLs etc.) important?

  - by I_Question_Things_Deeply

  I have been a computer-fanatic for almost a decade now. I've always loved and wondered how computers work, even from the purest, lowest hardware level to the very smallest pixel on the screen, and all the software around that. That seems to be my problem though ... as I try to write code (I'm pretty fluent at C++) I always sit there enormous amounts of time in front of a text-editor wondering how every line, statement, datum, function, etc. will correspond to every Assembly and machine instruction performed to do absolutely everything necessary for the kernel to allocate memory to run my compiled program, and all of the other hardware being used as well. For example ... I would write cout << "Before memory changed" << endl; and run the debugger to get the Assembly for this, and then try and reverse disassemble the Assembly to machine code based on my ISA, and then research every .dll, library file, linked library, linking process, linker source code of the program, the make file, the kernel I'm using's steps of processing this compilation, the hardware's part aside from the processor (e.g. video card, sound card, chipset, cache latency, byte-sized registers, calling convention use, DDR3 RAM and disk drive, filesystem functioning and so many other things). Am I going about programming wrong? I mean I feel I should know everything that goes on underneath English syntax on a computer program. But the problem is that the more I research every little thing the less I actually accomplish at all. I can never finish anything because of this mentality, yet I feel compelled to know everything... what should I do?

  Read the article

• 12.04 Taking forever for no apparent reason

  - by Sam

  First off, I'd just like to say how much I'm loving Ubuntu so far. It's one of my first steps into Linux, but so far it's blown away Windows in almost every regard. Now, onto my problem. My brothers have some old Dell Dimensions that are barely clinging to life. They were both running XP Home Premium. The 2400 installed just fine, no issues at all. Now, the other computer, the 3000 isn't clearing the screen with the Ubuntu logo and the pulsing dots. I've tried multiple discs, including the exact same one that gave me no issue in the other computer, and I'm at a loss. Does anyone have any suggestions as to where the problem might lay? They're both 32 bit Intel processors, and it's the correct version of Ubuntu. Is it a bad disc drive? Hardware incompatibility? Thanks for any assistance that can be provided. Dell Dimension 2400 Dell Dimension 3000

  Read the article

• How To Sync Your Shared Google Calendars with Your iPhone

  - by Justin Garrison

    Smartphones are essential to our daily lives. They help us stay connected and keep us organized. But when it comes to calendar syncing and Gmail there are limitations. Here’s how you can sync your shared calendars and contacts from Gmail. If you use Gmail you probably know about the ability to create and share calendars with others. They help keep groups organized and even let you subscribe to public events. When it comes to getting that information on your smartphone there are some trade offs if you are on a non-Android phone. Android phones will sync your email, contacts, and all of your calendars by just singing into your Gmail account. If you have an iPhone however, you will miss out on contact syncing if you set up your account as a Gmail account. HTG Explains: Do You Really Need to Defrag Your PC? Use Amazon’s Barcode Scanner to Easily Buy Anything from Your Phone How To Migrate Windows 7 to a Solid State Drive

  Read the article

• Partitions for dual boot install with Windows

  - by Tim

  Following is the layout of the current partitions of my single hard drive viewed from Windows 7: C: has Windows 7 system files and my personal data; Q: for Lenovo recovery; SYSTEM_DRV: for Windows boot files; My goals are: to create another partition D: for my personal data, and dedicate C: for Windows system files and applications only. to install Ubuntu alongside Windows. D: will be shared between the two OSes. My questions are: Is it correct that the free space generated from shrinking C: will only be able to create an extended partition, since there are already 3 primary partitions? So must D: be one logical partition on the extended partition, just as the partitions for Ubuntu will be? Will this be bad sometime? If yes, other better solutions? What are the good utilities to accomplish the partition tasks? Can Ubuntu installer solely handle them? Or better to have some of the jobs done in Windows with some recommended softwares? Thanks and regards!

  Read the article

• Librated error when creating partition table

  - by Marko

  I bought a Dell Inspiron 5521 laptop a few days ago that came with Ubuntu preinstalled. I haven't used Ubuntu yet, and I don't have any experience in using it. I wanted to install Windows 7 64-bit on my laptop alongside Ubuntu, and made two bootable USB drives with Gparted and Windows 7. There wasn't a suitable partition on my laptop in which I could install Windows 7. I've read the instructions for using Gparted to create or manage my hard drive. I inserted the USB, booted from BIOS, and followed the procedure in installing Gparted. Then I entered Gparted, and the following error occurred: Librated error when Creating partition table. It asked me to click on either OK or Cancel. Either way I had my hard disk shown to me in the user window, in partitions that were made by the manufacturer: Partition File sys Label Size Flags /dev/sda1 fat32 dellutility 300.00 Mib diag /dev/sda2 fat32 os 3.00 Gib lba /dev/sda3 ext4 912.46 Gib boot /dev/sda4 extended 15.75 Gib (had a subpart) /dev/sda5 linux-swap 15.75 Gib ...and a option to switch to dev/sdb that's unused and of capacity 3Gib. I've used the biggest partition 912.46 Gib, and tried to reduce its size, and clicked OK. Then when I tried to make a new partition, it said it can't make any more partitions, no more than a maximum of 5. I would like to keep Ubuntu and slowly learn, but I also need to use programs that work in Windows. Thank you for taking the time to answer my question.

  Read the article

• Virtual Technology Summit Series

  - by CassandraClark-OTN

  The Oracle Technology Network (OTN) is excited to invite you to our first Virtual Technology Summit Series.   Learn first hand from Oracle ACEs, Java Champions, and Oracle product experts, as they share their insight and expertise on using Oracle technologies to meet today’s IT challenges. We are offering three chances to watch and interact with Oracle and community experts.  Register Now by clicking one of the links below! Americas - Wednesday July 9th - 9am to 1pm PT / 12pm to 4pm  ET / 1 to 5 pm BRT EMEA – Thursday July 10th / 9am to 1pm BST / 10am – 2pm CET / 12pm to 4pm MSK / GST APAC English – July 16th / IST – 10:00am / SG – 12:30pm / AEST – 2:30pm ??These interactive, online events offer four technical tracks, each with a unique focus on specific tools, technologies, and tips in these focus areas: Java - Big Trends and Technologies - Java lets you mine Big Data, build robust apps with HTML5, JavaScript and Java EE, and expand into the Internet of Things. Experts will present and you’ll be able to chat with them live online. Don’t miss out on this great opportunity to learn from some of the best minds in the Java community. Systems – OS Tips and Tricks for Sysadmins – Learn first hand how to configure Oracle Linux to run Oracle Database 11g and 12c, how to use the latest networking capabilities in Oracle Solaris 11, and how to troubleshoot networking problems in Unix and Linux systems. Database - Mastering Oracle Database Management & Development Techniques – Oracle ACEs and product team experts will present advanced features and management methods that will help you master your Oracle Database capabilities and drive greater performance, agility and manageability of your IT implementation. This track will build upon your skills with data management, migration, and performance. Middleware - The Architecture of Analytics: Big Time Big Data and Business Intelligence – This track will present a solution architect’s perspective on how business intelligence products in Oracle’s Fusion Middleware family and beyond fit into an effective big data architecture, and present insight and expertise from Oracle ACEs specializing in business Intelligence to help you meet your big data business intelligence challenges.

  Read the article

• Oracle Transportation Management (Lead) Functional Consultant in Germany

  - by user769227

  My name is Giovanni and I lead the practice of OTM (Oracle Transportation Management) consultants in Western Europe. I currently have a role open for an OTM Lead Consultant to join my international team in Germany. Oracle Transportation Management is the leading TMS application software in the market, as confirmed by Gartner’s classification as LEADER of its TMS Magic Quadrant with the highest rating among vendors. The OTM Consulting practice is a team of OTM functional and technical specialists located across Europe whose broad objective is to assist companies in the implementation of their TMS solution based on OTM. These companies are leading Shippers of various industries and Logistic Service Providers. Key requirements for this role are: relevant experience with Supply Chain or Transportation Management in other consulting organizations or large enterprises, the drive to learn the leading TMS application software in today’s market and the interest to join a truly international team. We offer the opportunity to work for a leader of the IT Industry and assist international clients to realize their business transformation initiatives through innovation. If you have an entrepreneurial spirit, and are you looking for a work culture where innovation is the goal, hard work is expected, and creativity is rewarded then please visit this link for more information.

  Read the article

• Can't boot from USB - 11.04 / Exopc

  - by Charles

  I can't find the answer to this anywhere. I am new to Ubuntu, please help! I have a wetab, except now I don't, because I put Ubuntu 10.10 over the top of it (meant to dual boot, but that's another story). I upgraded to 11.04 out of curiosity. It's good, but not for touchscreen tablets - no multi touch for example. I want to get back the wetab OS now. I have all the files, and I have a bootable gparted USB stick. The problem is I can't seem to boot from USB. The "wetab" PC is actually an ExoPC, so it has only the hardware button and a soft button in the top corner. Using the wetab OS method of reaching BIOS with the hard and soft buttons doesn't work now, I only get a menu asking if I want to run Ubuntu in recovery mode, run a limited command line, or do a memory check. I need to either repartition the drive so I can dual boot with WeTabOS, or just wipe over Ubuntu and start again. How do I do this? I have also tried hammering F11, Del, F8, F1, many other combinations! Edit: I do have access to USB keyboard and mouse

  Read the article

< Previous Page | 365 366 367 368 369 370 371 372 373 374 375 376  | Next Page >