Search Results

Search found 18191 results on 728 pages for 'single board'.

Page 371/728 | < Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >

  • Does kern.hz still have any relevance in FreeBSD if "dynamic tick mode" is enabled?

    - by Frerich Raabe
    I'm running a FreeBSD 9.0 setup as a virtual machine in a KVM setup. In previous versions of FreeBSD it was common to force the kern.hz setting to a lower value so that the virtual machine does not keep the host busy because it's handling timer interrupts without having any work to do - the FreeBSD Handbook explains: The most important step is to reduce the kern.hz tunable to reduce the CPU utilization of FreeBSD under the Parallels environment. This is accomplished by adding the following line to /boot/loader.conf: kern.hz=100 Without this setting, an idle FreeBSD Parallels guest OS will use roughly 15% of the CPU of a single processor iMac®. After this change the usage will be closer to a mere 5%. However, in FreeBSD 9, the "dynamic tick mode" (aka "tickless mode") is the default, controlled by the kern.eventtimer.periodic setting which defaults to 0 (read: tickless mode). This makes me wonder - does the tip of lowering kern.hz still have any relevance for making FreeBSD 9 play nicely in a virtual machine setup?

    Read the article

  • Slow to sync music files?

    - by pst007x
    I have created a folder in the Ubuntu One sync folder and called it music. I have added various albums and the folder has started to sync. However the files were added back in October and still only the folders have synced and no music files. I tested this service before and added a single music file directly into the Ubuntu One folder (no sub folders) and within a few days it synced, however it seems anything in sub folders seem to stall or take a very long time. My ubuntu One program always says syncing and the progression bar creeps, but still no files synced. I know there are issues with speed but a month and going to sync? I recently tested the same files with Dropbox and it took 9 hours. I have port forwarded the https (443) port both in the software firewall and in my router, I tried disabling both firewalls too, either way it makes no difference. I have also tried both from home and the office on different Ubuntu systems. Is there anything anyone has done to improve this service? I am trying to integrate Ubuntu One service into the office to share project files but the syncing is taking to long. I am using the latest Ubuntu 10.10 (fully updated, fresh install), I love Ubuntu and wish to continue to support it anyway I can, so a solution would be good :-) Any help would be appreciated. Thanks Paul

    Read the article

  • Leveraging Code in Ever Bigger Games

    - by ashes999
    Summary: The same way that I continually build complex engines and libraries within a single platform and technology to allow me to build increasingly bigger and better games, how to continue this when development crosses into different platforms? If I switch platforms, how do I leverage past code and experiences? Games are hard to build. Big games are even harder to build. I've decided that to be able to make big games, I need to start building smaller games, and building up an asset base of code, assets (graphics, sounds), tools, and most importantly, game engines, so that I can eventually get there. One game at a time. Let me give an analogy. To build an MMO 3D RPG, I would approach this by building and releasing small games with increasingly more features. This could entail, for example: A simple 2D game A tile-based game A game with RPG elements (items, equipment, monsters, battle) A full-fledged RPG A 3D RPG The problem now is if I have to change platforms or tools, I don't know how to leverage past code-bases (and experience) to start with a mature product. Right now, I'm writing Silverlight (FlatRedBall) games. Let's say I stick with this for ten years, and then suddenly decide to write a PS6 game, which is in a different programming language entirely. Granted, I have ten years of game-development experience (and correspondingly ten years of professional software development experience from my day job) to back me up. But I would still like some way to transplant that 2D RPG engine into the new programming language, or else leverage it somehow. Is this even possible? What are my options?

    Read the article

  • Dividing up spritesheet in Javascript

    - by hustlerinc
    I would like to implement an object for my spritesheets in Javascript. I'm very new to this language and game-developement so I dont really know how to do it. My guess is I set spritesize to 16, use that to divide as many times as it fits on the spritesheet and store this value as "spritesheet". Then a for(i=0;i<spritesheet.length;i++) loop running over the coordinates. Then tile = new Image(); and tile.src = spritesheet[i] to store the individual sprites based on their coordinates on the spritesheet. My problem is how could I loop trough the spritesheet and make an array of that? The result should be similar to: var tile = Array( "img/ground.png", "img/crate.png" ); If possible this would be done with one single object that i only access once, and the tile array would be stored for later reference. I couldn't find anything similar searching for "javascript spritesheet". Edit: I made a small prototype of what I'm after: function Sprite(){ this.size = 16; this.spritesheet = new Image(); this.spritesheet.src = 'img/spritesheet.png'; this.countX = this.spritesheet.width / 16; this.countY = this.spritesheet.height / 16; this.spriteCount = this.countX * this.countY; this.divide = function(){ for(i=0;i<this.spriteCount;i++){ // define spritesheet coordinates and store as tile[i] } } } Am I on the right track?

    Read the article

  • CodePlex Daily Summary for Thursday, November 03, 2011

    CodePlex Daily Summary for Thursday, November 03, 2011Popular ReleasesFlagConsole: 1.0.1: BUGFIXES: - Fixed a bug, which caused the label not to draw a word, if it had the same length as the label's length.Nearforums - ASP.NET MVC forum engine: Nearforums v7.0: Version 7.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: UI: Flexible layout to handle both list and table-like template layouts. Theming - Visual choice of themes: Deliver some templates on installation, export/import functionality, preview. Allow site owners to choose default list sort order for the forums. Forum latest activity. Visit the project Roadmap for more details.?????????? - ????????: All-In-One Code Framework ??? 2011-11-02: http://download.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1codechs&DownloadId=216140 ??????,11??,?????20????Microsoft OneCode Sample,????6?Program Language Sample,2?Windows Base Sample,2?GDI+ Sample,4?Internet Explorer Sample?6?ASP.NET Sample。?????????????。 ????,?????。http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 Program Language CSImageFullScreenSlideShow VBImageFullScreenSlideShow CSDynamicallyBuildLambdaExpressionWithFie...Python Tools for Visual Studio: 1.1 Alpha: We’re pleased to announce the release of Python Tools for Visual Studio 1.1 Alpha. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python programming language. This release includes new core IDE features, a couple of new sample libraries for interacting with Kinect and Excel, and many bug fixes for issues reported since the release of 1.0. For the core IDE features we’ve added many new features which improve the basic edit...BExplorer (Better Explorer): Better Explorer 2.0.0.631 Alpha: Changelog: Added: Some new functions in ribbon Added: Possibility to choose displayed columns Added: Basic Search Fixed: Some bugs after navigation Fixed: Attempt to fix slow navigation and slow start Known issues: - BreadcrumbBar fails on some situations - Basic search not work quite well in some situations Please if anyone find bugs be kind and report them at the Issue Tracker! Thanks!DotNetNuke® Community Edition: 05.06.04: Major Highlights Fixed issue with upgrades on systems that had upgraded the Telerik library to 6.0.0 Fixed issue with Razor Host upgrade to 5.6.3 The logic for module administration checks contains incorrect logic in 1 place, opening the possibility of a user with edit permissions gaining access to functionality they should not have through a particularly crafted url Security FixesBrowsers support the ability to remember common strings such as usernames/addresses etc. Code was adde...Terminals: Version 2.0 - Beta 2 Release: The team has finally put the nail into the official release date for version 2.0. As bugs are winding down on the 2.0 Roadmap we decided to push out another build - the first 2.0 Beta build. Please take time to use and abuse this release. We left logging in place, and this is a debug build so be sure to submit your logs on each bug reported, and please do report all bugs! Check the source code page on the site, this beta includes all commits since (and including) the 90428 check-in back i...iTuner - The iTunes Companion: iTuner 1.4.4322: Added German (unverified, apologies if incorrect) Properly source invariant resources with correct resIDs Replaced obsolete lyric providers with working providers Fix Pseudolater to correctly morph every third char Fix null reference in CatalogBaseTrack Folder Changes: Track Folder Changes 1.0: Track Folder Changes 1.0 (binary)Devpad: 4.6: Whats new for Devpad 4.6: New Recent Files New Run in Safari Minor Bug Fix's, improvements and speed upsWindows Workflow Foundation on Codeplex: Microsoft.Activities v1.8.8: Microsoft.Activities Overview How do I install Microsoft.Activities? Updates in this release9318Technical Analysis Engine for .NET: Technical Analysis Engine 1.25: What's new in the 1.25 release (2011-11-01): - Added Williams %R indicator - Added Moving Average Envelopes indicatorBoxWorld: BoxWorld_2011.10.30: BoxWorld - 8.0.1110.30 This is the initial release of BoxWorld. I'd recommend downloading the installer as it contains the compiled code and everything all nicely contained. By default, you end up with this directory structure: C:\Program Files\ViperWorks\BoxWorld C:\Program Files\ViperWorks\BoxWorld\Data C:\Program Files\ViperWorks\BoxWorld\Interface C:\Program Files\ViperWorks\BoxWorld\Source In the root you have the compiled EXE files, one for the main release, one for the LITE release ...VidCoder: 1.2.1: Fixed a couple regressions: video encoder was blank in queue and crashes with the High Profile preset when opening the Settings window. Fixed problem with auto-update introduced in 1.2.0. If you have 1.2.0 you will need to update manually to get this.AssaultCube Reloaded: Release 2.3: THE RELEASE YOU'VE ALL BEEN WAITING FOR! IT CAN NOW BE CONSIDERED STABLE Linux has Debian 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, download the Linux package. The server pack is ready for both Windows and Linux, but you might need to compile your own for linux (source included) If you are using Windows and require the source code, download the source package!A Microblog API (SINA weibo.com open API in C#, .Net???????API): AMicroblogAPI v1.0: AMicroBlogAPI is a C# implementation, a strong-typed deep encapsulation, a easy-to-use .net wrapper of SINA microblog API v1.0. App developers no longer need to parse various HTTP responses -- all responses are parsed into strong types; No longer need to construt the request query strings -- just simply gives the values of parameters; No longer need to implement the OAuth -- a single call could logs the user on. In this release (AMicroblogAPI v1.0), all basic data APIs are implemented. For ...patterns & practices: Enterprise Library Contrib: Enterprise Library Contrib - 5.0 (Oct 2011): This release of Enterprise Library Contrib is based on the Microsoft patterns & practices Enterprise Library 5.0 core and contains the following: Common extensionsTypeConfigurationElement<T> - A Polymorphic Configuration Element without having to be part of a PolymorphicConfigurationElementCollection. AnonymousConfigurationElement - A Configuration element that can be uniquely identified without having to define its name explicitly. Data Access Application Block extensionsMySql Provider - ...Network Monitor Open Source Parsers: Network Monitor Parsers 3.4.2748: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, NetowrkMonitor_Parsers.msi continues to improve quality and fix bugs. It has included the fo...Duckworth Lewis Professional Edition Calculator: DLcalc 3.0: DLcalc 3.0 can perform Duckworth/Lewis Professional Edition calculations 100% accurately. It also produces over-by-over and ball-by-ball PAR score tables.Media Companion: MC 3.420b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Movies Fixed: Fanart and poster scraping issues TV Shows (Re)Added: Rebuild single show Fixed: Issue when shows are moved from original location Ability to handle " for actor nicknames Crash when episode name contains "<" (does not scrape yet) Clears fanart when switch...New ProjectsASP.NET MVC fluent validation framework: FluentMvc allow you to create validatable models without using any validation attributes.BeanPermutator: The BeanPermutator library provides a robust permutations engine. It was designed with framework API, optimal performance, and memory usage in mind. For performance, the implementation is modeled after STL's next_permutation; except with added support for conditional result sets.Cicero: Cicero is a library/application to programmatically analyze managed crash dumps. It provides a managed API to load dumps and look at managed objects, using [url:SOS|http://msdn.microsoft.com/en-us/library/bb190764.aspx] under the covers.CodePlex Windows Phone App: This project deals with how to browse efficently through codeplex website using windows phone capabilities.Collage: A photo collage screensaver.Docs Professional Archiving System: This application basically provides a professional audit compliant archiving system with storage service.EBSCOLunch: This app simply shows ebsco's lunch menu. It runs in the system tray and when clicked on shows today's cafeteria specials.Emesary: C# Interobject communication and application mssaging: Simple quick and efficient class based interobject communcation to allow decoupled disparate parts of a system to function together without knowing about each, e.g GUI, DB and business logic.Enterprise Data Entry, Reporting and Analysis Tool: This project will have app with different modules that will show the interface tools functions based on the designation of an employee as defined in Active Directory. Example: A team manager can view all the details regarding his immediate subordinates. Financial date and time libary: Date and time routines that know about holidays, rolling conventions, and day count fractions.Frame Work Model by Patán: Proyecto de modelado de FrameworkIttxa: Is in Alpha releaseKooboo CMS data sync module: Kooboo cms data export / import module.MetroBlog: A Windows 8 Metro inspired blog. Mosque: In the name of GOD this is a portalMPO tools: A .net library for parsing .mpo stereo images (in Multi-Picture Format).mytest5: my testtttttttttNetflix MVP Example: Example .NET movie application using the MVP pattern with windows forms and WPF. Uses the Netflix Odata service to get movie information.OpenStreetMap2Oracle: OpenStreetMap2Oracle is a windows application, which exports OpenStreetMap Data (*.osm - files) in an oracle database. The geometries will be stored in oracle's SDO_GEOMETRY datatype. It is developed in C Sharp with modern WPF - UI. PSRR - Remote Registry PowerShell 3.0 Module: Remote Registry PowerShell Module to manage the registry with Windows PowerShell. This version supports the new improvement in .NET 4 to specify a 32-bit or 64-bit view of the registry with the Microsoft.Win32.RegistryView enumeration when you open base keys.Raptor-Plus-Plus: CS240 class project Reset IPv6: Troubleshooting Pack to reset virtual IPv6 interfaces on Windows 7 (ISATAP, Teredo, IPHTTPS and 6to4)resurection: Game for WP7SharePoint 2010 Google Maps Web Part for Sandbox and Farm Solutions: The Google Maps Web Part lets you quickly and easily add Google Maps to your Microsoft SharePoint 2010 pages. Compatible with SharePoint 2010, SharePoint 2010 SP1 and SharePoint Online, via Office 365.SPLight UTL Sharepoint 2010 BackUp / Restore UI: Sharepoint 2010 BackUp / Restore UI Sharepoint 2010 backUp restore user interface site collection backup restore graphical user interfaceVisual Image Processing: Visual Image processing for 2d or 3d real-time video or still image from camera or web cam or scanner ... XNA4LED: XNA 4.0 LED Billboard Example

    Read the article

  • SQL query duplicating results [on hold]

    - by Ben
    I have written a query that results in data being retrieved for the top 5 customers in my table per account manager. Here is the query: SELECT account_manager_id, mgap_ska_id, total FROM (SELECT account_manager_id, mgap_ska_id, mgap_growth + mgap_recovery AS total, @grp_rank := IF(@current_accmanid = account_manager_id, @grp_rank + 1, 1) AS grp_rank, @current_accmanid := account_manager_id FROM mgap_orders ORDER BY total DESC ) ranked WHERE grp_rank <= 5 and here is the result of the query: account_manager_id mgap_ska_id total 159840 5062352 61569.21 159840 5062352 61569.21 159840 5062352 61569.21 159840 5062352 61569.21 159840 5062352 61569.21 160023 5024546 52244.29 160023 5024546 52244.29 160023 5024546 52244.29 160023 5024546 52244.29 160023 5024546 52244.29 159669 5323292 50126.38 159669 5323292 50126.38 159669 5323292 50126.38 159669 5323292 50126.38 159669 5323292 50126.38 As you can see the query is partially working as needed, except Im getting duplicates for mgap_ska_id whereas it should be five individual mgap_ska_id numbers. and here is a sample of my data: mgap_ska_id account_manager_id mgap_growth mgap_recovery 5057810 64154 0 1160.78 5178114 24456 0 5773.42 5292421 160338 0 5146.04 5414091 24408 0 104.14 5057810 64154 0 1160.78 Can anyone see where Ive gone wrong in my query and how/where I might correct the error so I get the 5 top individual customers (mgap_ska_id) instead of the duplicated top single customer?

    Read the article

  • MyMessageBox for Phone and Store apps

    - by Daniel Moth
    I am sharing a class I use for both my Windows Phone 8 and Windows Store app projects. Background and my requirements For my Windows Phone 7 projects two years ago I wrote an improved custom MessageBox class that preserves the well-known MessageBox interface while offering several advantages. I documented those and shared it for Windows Phone 7 here: Guide.BeginShowMessageBox wrapper. Aside: With Windows Phone 8 we can now use the async/await feature out of the box without taking a dependency on additional/separate pre-release software. As I try to share code between my existing Windows Phone 8 projects and my new Windows Store app projects, I wanted to preserve the calling code, so I decided to wrap the WinRT MessageDialog class in a custom class to present the same MessageBox interface to my codebase. BUT. The MessageDialog class has to be called with the await keyword preceding it (which as we know is viral) which means all my calling code will also have to use await. Which in turn means that I have to change my MessageBox wrapper to present the same interface to the shared codebase and be callable with await… for both Windows Phone projects and Windows Store app projects. Solution The solution is what the requirements above outlined: a single code file with a MessageBox class that you can drop in your project, regardless of whether it targets Windows Phone 8, or Windows 8 Store apps or both. Just call any of its static Show functions using await and dependent on the overload check the return type to see which button the user chose.// example from http://www.danielmoth.com/Blog/GuideBeginShowMessageBox-Wrapper.aspx if (await MyMessageBox.Show("my message", "my caption", "ok, got it", "that sucks") == MyMessageBoxResult.Button1) { // Do something Debug.WriteLine("OK"); } The class can be downloaded from the bottom of my older blog post. Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • Code Contracts and Pex at MSDN Live 2010

    - by terje
    One of the 6 sessions I and Mikael Nitell is running on MSDN Live 2010 here in Norway is about Code Quality, and part of that session goes through the use of Code Contracts and Pex.  Both fantastic tools ! They can be used togethers, but are also completely independent from each other, and can be used as a single Code Contracts  has to downloaded separately from VS 2010 (works also on VS 2008).   Start looking at http://msdn.microsoft.com/en-us/devlabs/dd491992.aspx . This download is a free download.   Code Contracts originates form the ideas of Bertrand Meyer – Design by Contract, take a look here. Pex is found on the MSDN Subscription download, so it requires an active MSDN Subscription. Start to get it from here http://research.microsoft.com/en-us/projects/pex/downloads.aspx .  The current version as of 14.4.10 is 0.9, which works with the 2010 RC.  A new version is due this week.  Pex is a tool to generate unit tests, and does this very intelligently.  Perfect to make tests for legacy code, but also to make sure you get all paths tested.  See the Reference information and project startup information.

    Read the article

  • After logging out of SSH, screen sessions disappear on Arch Linux

    - by Ivan
    On Arch Linux (I'm on a single dedicated server, where my domain name points to only one IP), when I SSH into a user (say, for example, user mc), and then do screen -S test (or -dmS, the resulting issue is the same), run a command, and then detach from it, then exit out of my SSH session, and log back in, the screen session disappears. screen -ls returns No Sockets found in /run/screens/S-mc. The only way I can reattach to my sessions is if I never logged out of my SSH. How do I fix this? I do have read/write access in /run/screens/S-mc I detach from screen sessions with Ctrl-A,D disown -a && exit gives me the same problem shopt huponexit returns "huponexit off" There is no ~/.logout, and ~/.bash_logout is empty, with 3 lines of comments, telling me it's the ~/.bash_logout file ls -l /usr/bin | grep screen returns lrwxrwxrwx 1 root root 12 Oct 31 2012 screen -> screen-4.0.3 -rwsr-xr-x 1 root root 363672 Oct 31 2012 screen-4.0.3

    Read the article

  • Should GeeksWithBlogs move to the Wordpress Platform?

    - by Martin Hinshelwood
    Geekswithblogs was my first ever blog and my first post was on 22nd June 2006. Since then very little functionality has been added. This is not a complaint, but rather an observation that it is very hard to keep up with all of the blogging capabilities that people want. My point would be: “Why bother!” Vote now for a migration of the awesome Geekswithblogs content from SubText to Wordpress. Having been a long time user of GWB I have been worried of late by my envy of other blogging platforms. I made a number of requests around 10 months ago for things that almost all blogging platforms provide, but which are not available on GWB. Support other comment frameworks – The current comment system is so antiquated that it does not even have the common filters like Facebook, twitter or Google login to help prevent spam. Tags are not listed in the RSS – This can prevent you from getting the Google juice that you deserve 301 redirects to a single URL– If you use a custom URL then all your posts are split between both the GWB URL and the custom one. This is VERY bas for SEO. I realise that it is difficult to find time to add all of the features that all the uber geeks on this site want, so why bother… lets move to the most popular and moded platform available and allow everyone to add whatever widgets they like. Figure: Vote for Geekswithblogs moving to Wordpress Why would I want this? There are over 13k plugins available Easy augmentation model Full mobile support Regular releases lots more… This could be a turning point in the legendary history of Geeks With Blogs, be part of it… What can I do to make this happen? I need your help to make this happen: Vote for it Discuss it

    Read the article

  • Opening password protected Excel 2007 documents by double clicking from My documents does not work u

    - by erik-van-gorp
    When all of the following conditions are true, excel will open (most of the time) but will not open the document itself. No error is displayed. This only occurs with Excel files, Word and powerpoint do open perfectly. Conditions : OS is "Windows 7 Professional 64-bit" office is "Office 2007 Ultimate". excel file is in .xls (2003 format) excel file is password protected excel file is in "My Documents" (or a subfolder of it) file is double-clicked from explorer under Windows 7. Following options do open the excel file as it should : right click and selecting the (bold) open action single click the file and pressing enter moving the file to the desktop and double-click it. non password protected files do open from the same directory. Actions taken not resolving the problem: - reboot - repair office installation - system restore does not work because of Antivirus application installed (message from system restore, using "Symantec Internet Security 2010") Anyone any idea ?

    Read the article

  • Drawing on a webpage – HTML5 - IE9

    - by nmarun
    So I upgraded to IE9 and continued exploring HTML5. Now there’s this ‘thing’ called Canvas in HTML5 with which you can do some cool stuff. Alright what IS this Canvas thing anyways? The Web Hypertext Application Technology Working Group says this: “The canvas element provides scripts with a resolution-dependent bitmap canvas, which can be used for rendering graphs, game graphics, or other visual images on the fly.” The Canvas element has two only attributes – width and height and when not specified they take up the default values of 300 and 150 respectively. Below is what my HTML file looks like: 1: <!DOCTYPE html> 2: <html lang="en-US"> 3: <head> 4: <script type="text/javascript" src="CustomScript.js"></script> 5: <script src="jquery-1.4.4.js" type="text/javascript"></script 6:  7: <title>Draw on a webpage</title> 8: </head> 9: <body> 10: <canvas id="canvas" width="500" height="500"></canvas> 11: <br /> 12: <input type="submit" id="submit" value="Clear" /> 13: <h4 id="currentPosition"> 14: 0, 0 15: </h4> 16: <div id="mousedownCoords"></div> 17: </body> 18: </html> In case you’re wondering, this is not a MVC or any kind of web application. This is plain ol’ HTML even though I’m writing all this in VS 2010. You see this is a very simple, ‘gimmicks-free’ html page. I have declared a Canvas element on line 10 and a button on line 11 to clear the drawing board. I’m using jQuery / JavaScript show the current position of the mouse on the screen. This will get updated in the ‘currentPosition’ <h4> tag and I’m using the ‘mousedownCoords’ to write all the places where the mouse was clicked. This is what my page renders as: The rectangle with a background is our canvas. The coloring is due to some javascript (which we’ll see in a moment). Now let’s get to our CustomScript.js file. 1: jQuery(document).ready(function () { 2: var isFirstClick = true; 3: var canvas = document.getElementById("canvas"); 4: // getContext: Returns an object that exposes an API for drawing on the canvas 5: var canvasContext = canvas.getContext("2d"); 6: fillBackground(); 7:  8: $("#submit").click(function () { 9: clearCanvas(); 10: fillBackground(); 11: }); 12:  13: $(document).mousemove(function (e) { 14: $('#currentPosition').html(e.pageX + ', ' + e.pageY); 15: }); 16: $(document).mouseup(function (e) { 17: // on the first click 18: // set the moveTo 19: if (isFirstClick == true) { 20: canvasContext.beginPath(); 21: canvasContext.moveTo(e.pageX - 7, e.pageY - 7); 22: isFirstClick = false; 23: } 24: else { 25: // on subsequent clicks, draw a line 26: canvasContext.lineTo(e.pageX - 7, e.pageY - 7); 27: canvasContext.stroke(); 28: } 29:  30: $('#mousedownCoords').text($('#mousedownCoords').text() + '(' + e.pageX + ',' + e.pageY + ')'); 31: }); 32:  33: function fillBackground() { 34: canvasContext.fillStyle = '#a1b1c3'; 35: canvasContext.fillRect(0, 0, 500, 500); 36: canvasContext.fill(); 37: } 38:  39: function clearCanvas() { 40: // wipe-out the canvas 41: canvas.width = canvas.width; 42: // set the isFirstClick to true 43: // so the next shape can begin 44: isFirstClick = true; 45: // clear the text 46: $('#mousedownCoords').text(''); 47: } 48: })   The script only looks long and complicated, but is not. I’ll go over the main steps. Get a ‘hold’ of your canvas object and retrieve the ‘2d’ context out of it. On mousemove event, write the current x and y coordinates to the ‘currentPosition’ element. On mouseup event, check if this is the first time the user has clicked on the canvas. The coloring of the canvas is done in the fillBackground() function. We first need to start a new path. This is done by calling the beginPath() function on our context. The moveTo() function sets the starting point of our path. The lineTo() function sets the end point of the line to be drawn. The stroke() function is the one that actually draws the line on our canvas. So if you want to play with the demo, here’s how you do it. First click on the canvas (nothing visible happens on the canvas). The second click draws a line from the first click to the current coordinates and so on and so forth. Click on the ‘Clear’ button, to reset the canvas and to give your creativity a clean slate. Here’s a sample output: Happy drawing! Verdict: HTML5 and IE9 – I think we’re on to something big and great here!

    Read the article

  • Oracle Endeca Information Discovery 3.1 is Now Available

    - by p.anda
    Oracle Endeca Information Discovery (OEID) 3.1 is a major release that incorporates significant new self-service discovery capabilities for business users. These include agile data mashup, extended support for unstructured analytics, and an even tighter integration with Oracle BI This release is available for download from: Oracle Delivery Cloud Oracle Technology Network Some of the what's new highlights ... Self-service data mashup... enables access to a wider variety of personal and trusted enterprise data sources. Blend multiple data sets in a single app. Agile discovery dashboards... allows users to easily create, configure, and securely share discovery dashboards with intelligent defaults, intuitive wizards and drag-and-drop configuration. Deeper unstructured analysis ... enables users to enrich text using term extraction and whitelist tagging while the data is live. Enhanced integration with OBI... provides easier wizards for data selection and enables OBI Server as a self-service data source. Enterprise-class data discovery... offers faster performance, a trusted data connection library, improved auditing and increased data connectivity for Hadoop, web content and Oracle Data Integrator. Find out more ... visit the OEID Overview page to download the What's New and related Data Sheet PDF documents. Have questions or want to share details for Oracle Endeca Information Discovery?  The MOS Communities is a great first stop to visit and you can stop-by at MOS OEID Community.

    Read the article

  • Storing data for use on Android and Windows Applications

    - by Andy Mepham
    I posted this last night on StackOverflow and was advised to move it over to StackExchange, thank you for taking a moment to look at my question. I'm developing a project proposal for my final year project at University and as I aim to use programming languages I am currently not too familiar with I'm looking for some guidance - I can't include details of my project but hopefully you will understand what I'm after. I'm going to be creating an Android application (in Java) and a Windows Application (in C#) that will ideally access, query and update a remotely hosted Database or set of XML files (this would most likely be over the Internet). I've done some looking around the internet and SQLite seems like a safe-bet for cross-platform manipulation of the database; however I would like to keep the system as lightweight as possible and I'm wondering whether XML files may provide a better alternative? Anyone out there that has experience using SQLite and/or remotely hosted XML for the purposes of Android and/or C# development that could point me in the right direction? If there is an alternative solution other than those I have mentioned I would be interested to hear about them too. Thank you for taking the time to read my question. Edit: The purpose of this application is for a small scale business, the data source would not need to be updated by more than one source but may be view from multiple sources (i.e. through multiple phones and a desktop PC). The database wouldn't be updating masses of data at a time (most likely single rows of a few tables at the most).

    Read the article

  • Multiple sites with the same codebase in Python

    - by Jimmy
    I am trying to run a large amount of sites which share about 90% of their code. They are simply designed to query an API and return the results. They will have a common userbase / database but will be configured slightly different and will have different CSS (perhaps even different templating). My initial idea was to run them as separate applications with a common library but I have read about the sites framework which would allow them to run from a single instance of Django which may help to reduce memory usage. https://docs.djangoproject.com/en/dev/ref/contrib/sites/ Is the site framework the right approach to a problem like this, and does it have real benefits over running separate applications? Initially I thought it was, but now I think otherwise. I have heard the following: Your SITE_ID is set in settings.py, so in order to have multiple sites, you need multiple settings.py configurations, which means multiple distinct processes/instances. You can of course share the code base between them, but each site will need a dedicated worker / WSGIDaemon to serve the site. This effectively removes any benefit of running multiple sites under one hood, if each site needs a UWSGI instance running. Alternative ideas of systems: https://github.com/iivvoo/django_layers https://github.com/shestera/django-multisite I don't know what route to be taking with this.

    Read the article

  • Chatbox/shoutbox/forum with the following features.

    - by Mick
    I would like to set up a simple forum for a small number of users. The features I would like are the following, in order of priority: logging on not compulsory for posting. A single thread. All the messages are immediately visible - no need to "open" them. most recent message at the top by default. The ability to give selected users the power to delete spam messages. The ability to upload photos. Avatars. Configurable skins/size/shape. So far the closest I have come is www.tag-world.com but there are no avatars and no photos.

    Read the article

  • Different background color for multiple filetypes in vim

    - by puk
    Is it possible to have different background colors in vim (ie. one light, one dark) when dealing with files with multiple filetypes (ie. :set ft=html.php)? In PHP code with HTML embedded, it can be difficult to see one single PHP statement amongst dozens of HTML lines, see below. I'll settle for anything, be it different bg color, a marker in the margin, a second left margin (one vim plugin does this for marks), maybe highlighting the <?php tag for example (although that's less than ideal) EDIT: I don't think this is possible at the syntax level as the syntax appears to use a limited number of elements (String, Function, Identifier...). This is no doubt to allow for the easy integration with colorschemes. SyntaxAttr is a good plugin to demonstrate this. Put it over any part of the code and it will tell you what syntax group it belongs to.

    Read the article

  • Multi-Domain Root Administrator

    - by Brent Pabst
    We have a new domain structure we are planning on rolling out in the next few months. Essentially there is a single top level and forest domain controller "mydomain.lan" and two children "us.mydomain.lan" and "pl.mydomain.lan". We want to configure an administrator account or two at the top level domain that then has full administrator permissions on the sub domains. By default the top level administrator cannot access or login to machines on the sub-domains. Running W2K8R2. Ideas?

    Read the article

  • Most efficient way to handle coordinate maps in Java

    - by glowcoder
    I have a rectangular tile-based layout. It's your typical Cartesian system. I would like to have a single class that handles two lookup styles Get me the set of players at position X,Y Get me the position of player with key K My current implementation is this: class CoordinateMap<V> { Map<Long,Set<V>> coords2value; Map<V,Long> value2coords; // convert (int x, int y) to long key - this is tested, works for all values -1bil to +1bil // My map will NOT require more than 1 bil tiles from the origin :) private Long keyFor(int x, int y) { int kx = x + 1000000000; int ky = y + 1000000000; return (long)kx | (long)ky << 32; } // extract the x and y from the keys private int[] coordsFor(long k) { int x = (int)(k & 0xFFFFFFFF) - 1000000000; int y = (int)((k >>> 32) & 0xFFFFFFFF) - 1000000000; return new int[] { x,y }; } } From there, I proceed to have other methods that manipulate or access the two maps accordingly. My question is... is there a better way to do this? Sure, I've tested my class and it works fine. And sure, something inside tells me if I want to reference the data by two different keys, I need two different maps. But I can also bet I'm not the first to run into this scenario. Thanks!

    Read the article

  • cPanel webmail roundcube direct login

    - by Jinx
    I have a small web hosting that I offer along my web development/design services. I run cent os with cPanel on it and I'd like to have my clients use roundcube by default without ever seeing cpanels page for picking webmail app (squirrel/horde/roundcube). I manage everything on the server so they don't need access to additional features that can be found on that page. So basically, how can I make www.somepage.com/webmail go directly to roundcube for every single account on my server. I know how to do it manually for each account, but that's a pain to do. Thanks!

    Read the article

  • Any ideas for automatic initial/scripted configuration of a NetApp?

    - by maddenca
    The background is to make a solution where we can automate as much as possible the building up of ‘pods’ that include server/network/storage and that will be built at remote sites. In an ideal world would be that we create a single management server which is preconfigured with DHCP/TFTP/or whatever. This management server is racked with a CISCO UCS, FAS31x0, etc. at a build site and is then transported to the final customer site where on power it almost configures itself, or at least bootstraps itself far enough that a remote skilled 'expert' can complete the setup of the pod. Ideas (doesn't have to resemble 100% of the above) would be helpful.

    Read the article

  • OOP oriented PHP app source code samples and advice

    - by abel
    The day I have been dreading has arrived. I never felt OOP or good software design was important(I knew they were important, but I thought I could manage without them.). However having read otherwise almost everywhere on the interwebs, I started dreading the day when my client would ask me for new features in an existing app. The day has come and the pain is unbearable! I have never coded my PHP websites "properly"(PHP is my primary language and the bulk of my work. I am learning Python (using web2py)) I take care that the website doesn't fall apart in a daily use scenario. I code pages like I was creating a list of static html files with bits of "magic code" in each of them(this bugs me a lot). How do I make the whole app more or less a single object? For eg. How do I design the object model for an invoicing app? I use a lot of functions for doing any particular thing in the same fashion throughout the app(for eg. validation, generating ids, calculating taxes etc.). I know the basics of OOP in general. Can anyone point me to source code samples of functional apps written in php? Or can someone provide pointers so I can recode my existing apps in a more modular way.

    Read the article

  • Can you play Halo 2 and Halo 3 on an Xbox360 Arcade?

    - by Jeremy Rudd
    I'm looking at purchasing a Xbox360 because I've wanted to catch up with the Halo trilogy. Does the cheap Arcade edition console support Halo 2 and Halo 3? Would I be able to save my game progress in single player? Would I be able to play online in typical maps? Would I be able to play games using the DVD drive or do I have to download everything? Does the tiny HDD hurt even if I don't download any games, trailers or music? Are there any other differences in comparison to the Xbox360 Pro? I have a regular TV that uses the composite cable, so I don't need the HDTV support in the Pro edition.

    Read the article

  • Add registry entries for all users

    - by George02
    I've installed a software on my windows 8 computer which writes entries in my registry. How can I modify this registry entries for all users ? For example what I need to modify is values from this key but this key only refers to a single user: [HKEY_USERS\S-1-5-21-543895283-3741240661-2983116896-500\Software\IvoSoft\ClassicStartMenu\Settings] But "S-1-5-21-543895283-3741240661-2983116896-500" is different depending on the user name. How can I change that key for all users ? I've tried to work with this key but is not possible. [HKEY_USERS\S-1-5-21-*\Software\IvoSoft\ClassicStartMenu\Settings]

    Read the article

  • Is djvubundle available in Ubuntu?

    - by Tim
    The official webpage says Assembling DjVu Images into Multipage Documents The batch compressors distributed as part of the DjVuText and DjVuLayered packages can directly produce multipage DjVu file when fed with multiple input files. The files produced are smaller than if the pages are compressed separately because the compressor can extract and share redundant information accross multiple pages. Individually compressed DjVu pages can be assembled into multipage documents using the free package DjVuMulti. To assemble a bunch of DjVu images into a single BUNDLED document simply type: djvubundle page1.djvu page2.djvu.... pageN.djvu document.djvu To assemble a bunch of DjVu images into an INDIRECT document, type: djvujoin page1.djvu page2.djvu.... pageN.djvu documentdir/index.djvu where documentdir must be an existing directory where all the individual page files will be copied. To disassemble a BUNDLED document into an INDIRECT one, simply say: djvujoin document.djvu documentdir/indexfile.djvu To convert a multipage document from one of the old 2.0 multipage formats, do djvureindex olddocument newdocument The programs djvujoin, and djvubundle supersede the 2.0 programs djvuindex and djvumerge. I couldn't find djvujoin and djvubundle for Ubuntu. djvulibre doesn't have them either. Do I miss something? Thanks.

    Read the article

< Previous Page | 367 368 369 370 371 372 373 374 375 376 377 378  | Next Page >