Search Results

Search found 18379 results on 736 pages for 'output buffering'.

Page 375/736 | < Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >

• XOLO X900–First mobile phone with Intel Power

  - by Rekha

  XOLO X900, XOLO’s offering the world’s first smart phone with the power of Intel inside® shaking hands with LAVA International Ltd., India’s fastest growing handset brands. The R&D Centre is in Shenzhan (China) and Bangalore (India). The smart phone has a fast web browsing with the 1.6 GHz Intel processor and smooth multi-tasking process using Intel patented Hyper Threading technology.It has an optimum battery usage, 4.03” hi-resolution of 1024X600 pixels LCD screen to ensure crisp text and vibrant images, HDMI Output port for TV, full HD 1080p playback and dual speakers. It has a camera of 8MP HD camera with certain DSLR like features allowing to click upto 10 photos in less than a second. 3D and HD gaming is immensely realistic with 400 MHz Graphics Processing Unit. The Operating System used here is Android 2.3 (Gingerbread) and upgradable to Android 4.0. It has the GPS facility and rear and front cameras with 8MP and 1.3MP respectively.  They have enabled Accelerometer, Gyroscope, Magnetometer, Ambient light sensor and Proximity sensor in this smart phone. Intel’s smartphone venture is beginning in India first. It is said to be available for sale in Indian from April 23, 2011 onwards. The price is at a best-buy price of INR 22,000 approximately. The smartphone will be available at the Indian retail chain Croma. The phone will available in other retail stores and online stores from early May. The company is launching the smartphone in India first and a more powerful handset in China later this year. According to their success in India and China, Intel is planning to come into Europe and US market. Till then, Intel smartphones are only for Indian buyers. You can more technical information from the XOLO’s site.

  Read the article

• Rate-Limit affects All clients or single IP?

  - by Asad Moeen

  Well up-til now I've considered iptables rate-limit commands with the "recent" module to work for each IP Address. For example rate-limit rule of 20k/s will trigger only if a single IP exceeds 20k/s rate and not if 4 different IPs exceed 5k/s rate. Please correct me if I considered this wrong as I've only used these rules for TCP/ UDP. But today I tried similar rules for ICMP and applied 4/s Input/Output. But then on trying to ping-test from just-ping.com I could see packet loss on almost all IP Addresses. How could that happen because if it worked for each IP Address then it wouldn't be triggering the rule because I believe each IP from just-ping has a rate of probably 1/s. I still think the first one is true because if it wasn't then my GameServer would block everyone if the combined rate ( in case of more connected players ) increased the threshold. This hasn't happened up til now so the ICMP thing really confused me. Thank you.

  Read the article

• Convert audio file to FLAC with ffmpeg?

  - by elpsk

  can I convert one of this format to compatible 16000.0 Sample Rate FLAC file? kAudioFormatLinearPCM = 'lpcm', kAudioFormatAppleIMA4 = 'ima4', kAudioFormatMPEG4AAC = 'aac ', kAudioFormatMACE3 = 'MAC3', kAudioFormatMACE6 = 'MAC6', kAudioFormatULaw = 'ulaw', kAudioFormatALaw = 'alaw', kAudioFormatMPEGLayer1 = '.mp1', kAudioFormatMPEGLayer2 = '.mp2', kAudioFormatMPEGLayer3 = '.mp3', kAudioFormatAppleLossless = 'alac' I tried using ffmpeg ffmpeg -i audio.xxx -acodec flac audio.flac but result is FFmpeg version CVS, Copyright (c) 2000-2004 Fabrice Bellard Mac OSX universal build for ffmpegX configuration: --enable-memalign-hack --enable-mp3lame --enable-gpl --disable-vhook --disable-ffplay --disable-ffserver --enable-a52 --enable-xvid --enable-faac --enable-faad --enable-amr_nb --enable-amr_wb --enable-pthreads --enable-x264 libavutil version: 49.0.0 libavcodec version: 51.9.0 libavformat version: 50.4.0 built on Apr 15 2006 04:58:19, gcc: 4.0.1 (Apple Computer, Inc. build 5250) Input #0, wsaud, from 'audio.alac': Duration: 00:00:03.8, start: 0.000000, bitrate: 199 kb/s Stream #0.0: Audio: adpcm_ima_ws, 24931 Hz, stereo, 199 kb/s Unable for find a suitable output format for 'audio.flac' I also installed flac codec for mac, but nothing... I tried also use convtoflac.sh (from http://legroom.net/software/convtoflac) but result is similar. Any idea to convert in flac?

  Read the article

• pdftk utility and batch file

  - by duhaas

  I cant for the life of me figure out what I'm missing. I have the following batch file: As you can see, when I run this batch file from my desk against a mapped drive it runs just fine: When I run the same exact batch file on the server itself, the place where the mapped drive is located on, it doesnt run and makes me think I have a syntax problem: I just dont understand whats going on, and my eyes are having a hard time keeping track of what might be diff. The server where it isnt working is windows 2003, my desktop where the same batch file is working is Windows 7. Here is the batch file, nothing crazy: FOR /D /r %%G in ("*") DO pdftk "%%G\*.pdf" cat output "%%G\Report.pdf"

  Read the article

• Introduction to LinqPad Driver for StreamInsight 2.1

  - by Roman Schindlauer

  We are announcing the availability of the LinqPad driver for StreamInsight 2.1. The purpose of this blog post is to offer a quick introduction into the new features that we added to the StreamInsight LinqPad driver. We’ll show you how to connect to a remote server, how to inspect the entities present of that server, how to compose on top of them and how to manage their lifetime. Installing the driver Info on how to install the driver can be found in an earlier blog post here. Establishing connections As you click on the “Add Connection” link in the left pane you will notice that now it’s possible to build the data context automatically. The new driver appears as an option in the upper list, and if you pick it you will open a connection dialog that lets you connect to a remote StreamInsight server. The connection dialog lets you specify the address of the remote server. You will notice that it’s possible to pick up the binding information from the configuration file of the LinqPad application (which is normally in the same folder as LinqPad.exe and is called LinqPad.exe.config). In order for the context to be generated you need to pick an application from the server. The control is editable hence you can create a new application if you don’t want to make changes to an existing application. If you choose a new application name you will be prompted for confirmation before this gets created. Once you click OK the connection is created and you can start issuing queries against the remote server. If there’s any connectivity error the connection is marked with a red X and you can see the error message informing you what went wrong (i.e., the remote server could not be reached etc.). The context for remote servers Let’s take a look at what happens after we are connected successfully. Every LinqPad query runs inside a context – think of it as a class that wraps all the code that you’re writing. If you’re connecting to a live server the context will contain the following: The application object itself. All entities present in this application (sources, sinks, subjects and processes). The picture below shows a snapshot of the left pane of LinqPad after a successful connection. Every entity on the server has a different icon which will allow users to figure out its purpose. You will also notice that some entities have a string in parentheses following the name. It should be interpreted as such: the first name is the name of the property of the context class and the second name is the name of the entity as it exists on the server. Not all valid entity names are valid identifier names so in cases where we had to make a transformation you see both. Note also that as you hover over the entities you get IntelliSense with their types – more on that later. Remoting is not supported As you play with the entities exposed by the context you will notice that you can’t read and write directly to/from them. If for instance you’re trying to dump the content of an entity you will get an error message telling you that in the current version remoting is not supported. This is because the entity lives on the remote server and dumping its content means reading the events produced by this entity into the local process. ObservableSource.Dump(); Will yield the following error: Reading from a remote 'System.Reactive.Linq.IQbservable`1[System.Int32]' is not supported. Use the 'Microsoft.ComplexEventProcessing.Linq.RemoteProvider.Bind' method to read from the source using a remote observer. This basically tells you that you can call the Bind() method to direct the output of this source to a sink that has to be defined on the remote machine as well. You can’t bring the results to the LinqPad window unless you write code specifically for that. Compose queries You may ask – what's the purpose of all that? After all the same information is present in the EventFlowDebugger, why bother with showing it in LinqPad? First of all, What gets exposed in LinqPad is not what you see in the debugger. In LinqPad we have a property on the context class for every entity that lives on the server. Because LinqPad offers IntelliSense we in fact have much more information about the entity, and more importantly we can compose with that entity very easily. For example, let’s say that this code creates an entity: using (var server = Server.Connect(...)) {     var a = server.CreateApplication("WhiteFish");     var src = a         .DefineObservable<int>(() => Observable.Range(0, 3))         .Deploy("ObservableSource"); If later we want to compose with the source we have to fetch it and then we can bind something to     a.GetObservable<int>("ObservableSource)").Bind(... This means that we had to know a bunch of things about this: that it’s a source, that it’s an observable, it produces a result with payload Int32 and it’s named “ObservableSource”. Only the second and last bits of information are present in the debugger, by the way. As you type in the query window you see that all the entities are present, you get IntelliSense support for them and it’s much easier to make sense of what’s available. Let’s look at a scenario where composition is plausible. With the new programming model it’s possible to create “cold” sources that are parameterized. There was a way to accomplish that even in the previous version by passing parameters to the adapters, but this time it’s much more elegant because the expression declares what parameters are required. Say that we hover the mouse over the ThrottledSource source – we will see that its type is Func<int, int, IQbservable<int>> - this in effect means that we need to pass two int parameters before we can get a source that produces events, and the type for those events is int – in the particular case of my example I had the source produce a range of integers and the two parameters were the start and end of the range. So we see how a developer can create a source that is not running yet. Then someone else (e.g. an administrator) can pass whatever parameters appropriate and run the process. Proxy Types Here’s an interesting scenario – what if someone created a source on a server but they forgot to tell you what type they used. Worse yet, they might have used an anonymous type and even though they can refer to it by name you can’t figure out how to use that type. Let’s walk through an example that shows how you can compose against types you don’t need to have the definition of. This is how we can create a source that returns an anonymous type: Application.DefineObservable(() => Observable.Range(1, 10).Select(i => new { I = i })).Deploy("O1"); Now if we refresh the connection we can see the new source named O1 appear in the list. But what’s more important is that we now have a type to work with. So we can compose a query that refers to the anonymous type. var threshold = new StreamInsightDynamicDriver.TypeProxies.AnonymousType1_0<int>(5); var filter = from i in O1              where i > threshold              select i; filter.Deploy("O2"); You will notice that the anonymous type defined with this statement: new { I = i } can now be manipulated by a client that does not have access to it because the LinqPad driver has generated another type in its stead, named StreamInsightDynamicDriver.TypeProxies.AnonymousType1_0. This type has all the properties and fields of the type defined on the server, except in this case we can instantiate values and use it to compose more queries. It is worth noting that the same thing works for types that are not anonymous – the test is if the LinqPad driver can resolve the type or not. If it’s not possible then a new type will be generated that approximates the type that exists on the server. Control metadata In addition to composing processes on top of the existing entities we can do other useful things. We can delete them – nothing new here as we simply access the entities through the Entities collection of the application class. Here is where having their real name in parentheses comes handy. There’s another way to find out what’s behind a property – dump its expression. The first line in the output tells us what’s the name of the entity used to build this property in the context. Runtime information So let’s create a process to see what happens. We can bind a source to a sink and run the resulting process. If you right click on the connection you can refresh it and see the process present in the list of entities. Then you can drag the process to the query window and see that you can have access to process object in the Processes collection of the application. You can then manipulate the process (delete it, read its diagnostic view etc.). Regards, The StreamInsight Team

  Read the article

• Where to put code documentation?

  - by Patrick

  I am currently using two systems to write code documentation (am using C++): Documentation about methods and class members are added next to the code, using the Doxygen format. On a server Doxygen is run on the sources so the output can be seen in a web browser Overview pages (describing a set of classes, the structure of the application, example code, ...) is added to a Wiki I personally think that this approach is easy because the documentation about members and classes is really close to the code, while the overview pages are really easy to edit in the Wiki (and it's also easy to add images, tables, ...). A web browser allows you to see both documentations. My co-worker now suggests to put everything in Doxygen, because we can then create one big help file with everything in it (using either Microsoft's HTML WorkShop or Qt Assistant). My concern is that editing Doxygen-style documentation is much harder (compared to Wiki), especially when you want to add tables, images, ... (or is there a 'preview' tool for Doxygen that doesn't require you to generate the code before you can see the result?) What do big open-source (or closed source) projects use to write their code documentation? Do they also split this up between Doxygen-style and a Wiki? Or do they use another system? What is the most appropriate way to expose the documentation? Via a Web server/browser, or via a big (several 100MB) help file? Which approach do you take when writing code documentation?

  Read the article

• 3.5mm headphone jack -> Component video?

  - by Isaac Waller

  Hello, I have a strange cord that has a male 3.5mm headphone jack on one side, and some component video and audio ouputs on the other. When I plug the headphone side into my computer, and the other side into my TV, I get audio across the cable, but no video. How can I send some video over the headphone jack in OS X? I know you can, because this cable is actually for a Beyblade toy and it somehow transferred video over this cable. Thanks, Isaac I think I found some more information (from Wikipedia:) "A four conductor version (of a 3.5mm headphone jack) is becoming a de facto standard output connector for compact camcorders, providing stereo sound plus a video signal." So how can I do this on Mac?

  Read the article

• Lenovo S110 netbook screen resolution Ubuntu

  - by Neigyl R. Noval

  I am still stuck with 800x600 resolution. Here is the output of lspci: 00:00.0 Host bridge: Intel Corporation Device 0bf2 (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Device 0be2 (rev 09) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) 00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8176 (rev 01) Also, I tried modifying /usr/lib/X11/xorg.conf.d/10-monitor.conf to fix this problem, but still does not work: Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Screen" Identifier "Screen0" Monitor "Monitor0" Device "Card0" SubSection "Display" Viewport 0 0 Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" EndSubSection EndSection Section "Device" Identifier "Card0" Driver "vesa" VendorName "Intel Corporation Device" EndSection I'm using Gnome. System Preference Monitor screen resolution sticks to 800x600. What am I going to do?

  Read the article

• Can't figure out why hard drive is full [closed]

  - by Belgin Fish

  Possible Duplicate: How do I find out what is using up all the space on my / partition? No Free disk space so I have 2 hard drives in my server, one main one that is 10gb and then a separate one that is 2tb I'm storing all the files on the second one and the df -h output looks like this Filesystem Size Used Avail Use% Mounted on /dev/sda2 9.2G 8.8G 0 100% / tmpfs 1.5G 0 1.5G 0% /lib/init/rw udev 1.5G 148K 1.5G 1% /dev tmpfs 1.5G 0 1.5G 0% /dev/shm /dev/sda4 1.8T 747G 981G 44% /home /dev/sda4 1.8T 747G 981G 44% /usr/lib/cgi-bin I just can't figure out why the first one is full when all the files are being stored in the /usr/lib/cgi-bin I'm running debian I can't seem to find any files that would take up 8.8gb that arn't on the second hard drive :S Thanks!

  Read the article

• Cygwin won't start Gitk

  - by starcorn

  Hey I have followed this answer to solve problem with running GUI applications under Cygwin. So far it seems okay, but when I try to open gitk it will complain on that it cannot find any git repository here. I am standing in the correct folder though, and running git from console it works (I can push, pull, and so on) But gitk won't start as it say it is not any git repository here. Anyone know how to fix it? I type the following to the console. gitk And the output I get is: 0 [main] wish8.5 2260 child_info_fork::abort: C:\cygwin\bin\libtcl8.5.dll: Loaded to different address: parent(0x520000) != child(0x410000) 0 [main] wish8.5 4332 child_info_fork::abort: C:\cygwin\bin\libtcl8.5.dll: Loaded to different address: parent(0x520000) != child(0x560000) 0 [main] wish8.5 4716 child_info_fork::abort: C:\cygwin\bin\libtcl8.5.dll: Loaded to different address: parent(0x520000) != child(0x410000) 0 [main] wish8.5 4724 child_info_fork::abort: C:\cygwin\bin\libtcl8.5.dll: Loaded to different address: parent(0x520000) != child(0x410000)

  Read the article

• Kingston SD reader not working for USB3

  - by user1146334

  I have a Kingston 4-in-1 Multimedia reader. When my PC was formatted with Win7 it worked fine. I decided to change to Ubuntu 14.04 and now it doesn't work. If I plug it into one of the USB2 ports it works fine, but whenever I plug it into one of the USB3 ports, it thinks about it for a minute and then dies. Here's the output of dmesg when it dies [110262.148656] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd [110262.170330] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [110262.266379] usb 4-1: New USB device found, idVendor=11b0, idProduct=6348 [110262.266386] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [110262.266390] usb 4-1: Product: USB3.0 Media Reader [110262.266394] usb 4-1: Manufacturer: Kingston [110262.266398] usb 4-1: SerialNumber: 08735314400198 [110262.272929] usb-storage 4-1:1.0: USB Mass Storage device detected [110262.273239] scsi15 : usb-storage 4-1:1.0 [110263.290056] scsi 15:0:0:0: Direct-Access FCR-HS3 -0 1.00 PQ: 0 ANSI: 4 [110263.306622] scsi 15:0:0:1: Direct-Access FCR-HS3 -1 1.00 PQ: 0 ANSI: 4 [110263.323292] scsi 15:0:0:2: Direct-Access FCR-HS3 -2 1.00 PQ: 0 ANSI: 4 [110263.339858] scsi 15:0:0:3: Direct-Access FCR-HS3 -3 1.00 PQ: 0 ANSI: 4 [110263.340332] sd 15:0:0:0: Attached scsi generic sg3 type 0 [110263.340706] sd 15:0:0:1: Attached scsi generic sg4 type 0 [110263.340850] sd 15:0:0:2: Attached scsi generic sg5 type 0 [110263.340975] sd 15:0:0:3: Attached scsi generic sg6 type 0 [110264.651847] sd 15:0:0:1: [sde] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) [110264.667049] sd 15:0:0:1: [sde] Write Protect is off [110264.667055] sd 15:0:0:1: [sde] Mode Sense: 2f 00 00 00 [110264.682767] sd 15:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [110264.694975] sd 15:0:0:2: [sdf] Attached SCSI removable disk [110264.697933] sd 15:0:0:3: [sdg] Attached SCSI removable disk [110264.729918] sd 15:0:0:0: [sdd] Attached SCSI removable disk [110264.754189] sde: sde1 [110264.760114] sd 15:0:0:1: [sde] Attached SCSI removable disk [110275.377368] usb 4-1: reset SuperSpeed USB device number 3 using xhci_hcd [110275.398453] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [110275.436592] xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802e4fb9980 [110275.436600] xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802e4fb99c0 [110277.263444] usb 4-1: USB disconnect, device number 3

  Read the article

• Wireless not working on desktop with Asus USB-N13 (B1) wireless adapter

  - by user900749

  I am trying to connect my desktop to a wireless network. I have purchased an ASUS USB-N13 B1 adapter. I have followed instructions for installing drivers and disabling conflicting drivers. I have thoroughly searched and could not find a solution. The adapter is recognized and powered on. I have entered the ssid and password information into the wireless network configuration. Other machines can connect to this wireless network, and the machine can connect online via ethernet without issue. Here is the output of some commands which summarize my configuration, and might give some clues : ~$ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" ~$ uname -a Linux petra 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux ~$ lsusb Bus 001 Device 006: ID 0b05:17ab ASUSTek Computer, Inc. ~$ dmesg [ 1883.823150] wlan0: authenticate with 48:5b:39:e7:25:5e (try 1) [ 1884.020027] wlan0: authenticate with 48:5b:39:e7:25:5e (try 2) [ 1884.220025] wlan0: authenticate with 48:5b:39:e7:25:5e (try 3) [ 1884.420023] wlan0: authentication with 48:5b:39:e7:25:5e timed out Any assistance would be appreciated as I have been trying to get this machine online for several weeks now to no avail. Sincerely, Michael.

  Read the article

• [SOLVED]Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel

  - by kazim sardar mehdi

  Another version of this product is already installed.  Installation of this version cannot continue.  To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel I tried to install a new version of windows services that packed into 1 setup.msi and encounter the above mentioned error. To resolve it I tried google read lots of but then find the following article MSIEXEC - The power user's install steps to solve the error: 1. Execute the following command from command prompt: msiexec /i program_name.msi /lv logfile.log where program_name.msi is the new version /lv is log Verbose output   2. open up the logfile.log in the editor 3. find the GUID in it I found it like the following Product Code from property table before transforms: '{GUID}' 4. Above mentioned article suggest  to search it in the registry but to find the uninstall command. Try if you like to see it in the registry. you need to search twice to to get there there you I tried the following command as it mentioned in the above mentioned article but it didn’t work for me. so I keep digging until I got Windows 7 and Windows Installer Error “Another installation is in progress” It mentioned the use of msizap.exe 5.   by combining the commands from both the articles I able to uninstall the service successfully execute the following command from the visual studio command prompt if you already have installed or get it from Microsoft website http://msdn.microsoft.com/en-us/library/aa370523%28VS.85%29.aspx   msizap.exe TWP {GUID} it did the trick and removed the installed service successfully

  Read the article

• Linux to Solaris @ Morgan Stanley

  - by mgerdts

  I came across this blog entry and the accompanying presentation by Robert Milkoski about his experience switching from Linux to Oracle Solaris 11 for a distributed OpenAFS file serving environment at Morgan Stanley. If you are an IT manager, the presentation will show you: Running Solaris with a support contract can cost less than running Linux (even without a support contract) because of technical advantages of Solaris. IT departments can benefit from hiring computer scientists into Systems Programmer or similar roles.  Their computer science background should be nurtured so that they can continue to deliver value (savings and opportunity) to the business as technology advances. If you are a sysadmin, developer, or somewhere in between, the presentation will show you: A presentation that explains your technical analysis can be very influential. Learning and using the non-default options of an OS can make all the difference as to whether one OS is better suited than another.  For example, see the graphs on slides 3 - 5.  The ZFS default is to not use compression. When trying to convince those that hold the purse strings that your technical direction should be taken, the financial impact can be the part that closes the deal.  See slides 6, 9, and 10.  Sometimes reducing rack space requirements can be the biggest impact because it may stave off or completely eliminate the need for facilities growth. DTrace can be used to shine light on performance problems that may be suspected but not diagnosed.  It is quite likely that these problems have existed in OpenAFS for a decade or more.  DTrace made diagnosis possible. DTrace can be used to create performance analysis tools without modifying the source of software that is under analysis.  See slides 29 - 32. Microstate accounting, visible in the prstat output on slide 37 can be used to quickly draw focus to problem areas that affect CPU saturation.  Note that prstat without -m gives a time-decayed moving average that is not nearly as useful. Instruction level probes (slides 33 - 34) are a super-easy way to identify which part of a function is hot.

  Read the article

• Tool to check if XML is valid in my VS2012 comments

  - by davidjr

  I am writing the documentation for our companies software developed with vs2012. I need to add xml examples to the summary of each class, due to xml instantiation of objects. We are using sandcastle to create the documentation (company choice), and I want to be able to review my xml comments without building the help file every time. Is there an application that anyone would recommend where I can view how the xml renders before I build the help file? Here is my example: /// <summary> /// Performs DFT on a data array, writes output in a CSV file. /// </summary> /// <example> /// <para>XML declaration</para> /// <code lang="xml" xml:space="preserve"> /// %lt;DataProvider name="DftDP" description="Computes DFT" etc... I want to check the XML to make sure it is valid, maybe by copy and pasting it into a tool of some sort?

  Read the article

• Cannot copy MP3 files from a CD

  - by MountainX

  I purchased a set of spoken word audio CD's that have MP3 and FLAC audio files; I think they also play as regular audio CD's because I see a CDA directory and .cda files. But I'm only interested in playing the MP3 files by copying them to my phone. Dolphin file manager shows all the files on the CD. However, it will not copy any of them to my hard drive, which is what my goal is. Dolphin shows no error, but the copy progress is zero. Amarok will play the files but not easily. I only tried the flac files. To play a file, I click the file in Dolphin, then I have to cancel a job using KDE's notification system, then Amarok proceeds to copy the file to a tmp directory which takes a long time, then it finally plays. kb3 will rip the audio, but I would prefer to copy the files directly from the CD. Since Dolphin would not copy the files, I thought I would try the terminal, but I can't get that to work either. mount -t auto -o ro /dev/sr0 /mnt/temp that gives the error: wrong fs type, bad option, bad superblock, etc. I get the same error using -t iso9660 and -t udf. so I started troubleshooting: ~$ wodim --devices wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg1' rwrw-- : 'MATSHITA' 'DVD-RAM UJ8A0AS' ------------------------------------------------------------------------- /dev/sg1 is not a block device sudo file -s /dev/sr0 ERROR: cannot read /dev/sr0 (input/output error) sudo file -s /dev/sg1 just hangs How can I copy these files to my computer hard disk?

  Read the article

• Is mocking for unit testing appropriate in this scenario?

  - by Vinoth Kumar

  I have written around 20 methods in Java and all of them call some web services. None of these web services are available yet. To carry on with the server side coding, I hard-coded the results that the web-service is expected to give. Can we unit test these methods? As far as I know, unit testing is mocking the input values and see how the program responds. Are mocking both input and ouput values meaningful? Edit : The answers here suggest I should be writing unit test cases. Now, how can I write it without modifying the existing code ? Consider the following sample code (hypothetical code) : public int getAge() { Service s = locate("ageservice"); // line 1 int age = s.execute(empId); // line 2 return age; // line 3 } Now How do we mock the output ? Right now , I am commenting out 'line 1' and replacing line 2 with int age= 50. Is this right ? Can anyone point me to the right way of doing it ?

  Read the article

• Windows screen shots via command-line SSH session

  - by Geoff Fritz

  I've browsed the handful of "screen capture" queries here, but I was unable to find anything which addressed my specific need. I'm looking for a command-line tool that I can run via remote SSH connection (by way of the cygwin sshd daemon). There are several to choose from, but the few I've tried (ImageMagick, nircmd, and MiniCap) all result in a blank screen. I assume that this is due to the remotely logged in user not having a proper graphical console session running. The goal here is automate screen capture and retrieval of the main system console (what one would see if they were looking at the physical monitor) through the use of ssh script from a Unix host: ssh user@windowshost "screencap --output /tmp/console.jpg" scp user@windowshost:/tmp/console.jpg /some/destdir Note that these must be done on demand, so polling a remote directory that has snapshots dumped periodically will not work. Bonus points for programs that are open source and have a portable install (so I don't need to RDP/VNC into the machine to run a graphical installer).

  Read the article

• Launcher icon size and window behavior broken

  - by philipp

  I have installed the nvidia driver for my graphic card, just following some tutorials what works fine now. After this I could set the Icon size of the launcher, windows had a nice litte shadow, resolution was better and the windows showed up a nice effect when popping up an or when bringing to full-screen... But today the this was just gone after reboot. What could this be? Nvidia xserver-settings are availible. I installed and reinstalled wine1.5 via the apt-get commands, so this might broke something. What can do to fix this again? Greetings philipp EDIT: I went on searching and all i found was that this problem might be connected to the mode of unit, so there is 2d and 3d, but could also be something else, just because setting the mode brings no change. EDIT 2: the version of Ubuntu is: 12.04 and it is a 64 bit environment the graphic card is: GeForce GT 330M Edit 3: Using maps.google in webGL mode does not work anymore too, it was working yesterday. EDIT 4: the screenshot. btw: I think that blender is not working anymore too... EDIT: 5 I think that the problem is closely connected to this output

  Read the article

• Problem with xvideoservice thief

  - by Nrew

  Xvideo service thief is an application that allows you to download and convert youtube videos into .avi format. The problem is when it tries to convert the .flv into a .avi. The audio in the video is not being played when you try to play the video. But the .flv works fine. I have also enabled Intel(R) speedstep feature in my processor(Pentium Dual core E5200) to decrease the power consumed by the processor with the help of Granola software. What might be the reason for the audio less video converter by xvideo service thief? Could it be the enabling of intel(R) speedstep? Because the software works fine when its not enabled. Is this possible?That the output some applications can be altered when enabling this processor feature?

  Read the article

• How do I add and/or keep subtitles when converting video?

  - by JoeSteiger

  I have a mkv video I want to convert to mp4, but every which way I try and convert it (Handbrake, WinFF, ffmpeg, mencoder,...I lose the video's subtitles. How can I convert the video,keeping the subtitles, or add a subtitles.srt? I also would like 2 pass encoding with a video bitrate of 4054 and audio bitrate of 160. Thanks. I was asked for the ffmpeg -i: joe@joe-Leopard-Extreme:/media/Elements/Home Folder/Videos$ ffmpeg -i iron.mkv ffmpeg version 0.8.3-4:0.8.3-0ubuntu0.12.04.1, Copyright (c) 2000-2012 the Libav developers built on Jun 12 2012 16:52:09 with gcc 4.6.3 *** THIS PROGRAM IS DEPRECATED *** This program is only provided for compatibility and will be removed in a future release. Please use avconv instead. [matroska,webm @ 0x1a319a0] Estimating duration from bitrate, this may be inaccurate Input #0, matroska,webm, from 'iron.mkv': Metadata: title : Iron Duration: 02:06:01.67, start: 0.000000, bitrate: 1280 kb/s Chapter #0.0: start 0.000000, end 546.170622 Metadata: title : Chapter 00 Chapter #0.1: start 546.170622, end 1080.579489 Metadata: title : Chapter 01 Chapter #0.2: start 1080.579489, end 1609.941667 Metadata: title : Chapter 02 Chapter #0.3: start 1609.941667, end 2101.849733 Metadata: title : Chapter 03 Chapter #0.4: start 2101.849733, end 2595.259333 Metadata: title : Chapter 04 Chapter #0.5: start 2595.259333, end 3158.488667 Metadata: title : Chapter 05 Chapter #0.6: start 3158.488667, end 3564.644400 Metadata: title : Chapter 06 Chapter #0.7: start 3564.644400, end 4052.423356 Metadata: title : Chapter 07 Chapter #0.8: start 4052.423356, end 4304.300000 Metadata: title : Chapter 08 Chapter #0.9: start 4304.300000, end 4711.206489 Metadata: title : Chapter 09 Chapter #0.10: start 4711.206489, end 5080.575489 Metadata: title : Chapter 10 Chapter #0.11: start 5080.575489, end 5700.111067 Metadata: title : Chapter 11 Chapter #0.12: start 5700.111067, end 6269.346400 Metadata: title : Chapter 12 Chapter #0.13: start 6269.346400, end 6811.471333 Metadata: title : Chapter 13 Chapter #0.14: start 6811.471333, end 7561.679000 Metadata: title : Chapter 14 Stream #0.0(eng): Video: h264 (High), yuv420p, 1920x1080 [PAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc Stream #0.1(eng): Audio: ac3, 48000 Hz, 5.1, s16, 640 kb/s (default) Metadata: title : 3/2+1 Stream #0.2(ita): Audio: ac3, 48000 Hz, 5.1, s16, 640 kb/s Metadata: title : 3/2+1 Stream #0.3(eng): Subtitle: pgssub (default) Stream #0.4(eng): Subtitle: pgssub Stream #0.5(eng): Subtitle: pgssub Stream #0.6(eng): Subtitle: pgssub At least one output file must be specified joe@joe-Leopard-Extreme:/media/Elements/Home Folder/Videos

  Read the article

• Run batch on files in a relative folder

  - by Matteo Cuellar Vega

  I have a windows batch script that runs a SOX command on various files, but I don't know how to get the batch to run on files in a relative path to that of the SOX executable. Currently all the files are in the root and it outputs to /combined. The Batch Script: cd %~dp0 mkdir combined FOR %%A IN (*.mp3) DO sox static.mp3 %%A "combined/%%~nxA" pause I want the script to run the sox command on files in the directory "audiotracks" and output it to the directory "combined". To give you an idea, this would be the desired folder structure: /root sox.exe batch.bat static.mp3 /audiotracks audio1.mp3 audio2.mp3 audio3.mp3 audio4.mp3 /combined audio1out.mp3 audio2out.mp3 audio3out.mp3 audio4out.mp3 Is this possible, or is there a better method of doing this? Any help would be greatly appreciated. Thanks a lot!

  Read the article

• Does ssh key need to be named id_rsa?

  - by dustyprogrammer

  I have come across this problem a couple of times when creating build servers with keyed authentication. I was wondering if anyone else has experience this. I have a couple of keys for my current user that may connect to different machines. Let say machine1 and machine2. I have pasted my public key into their respective authorized_keys file. The first one I have named the first key id_rsa and the second key bender. When I try to connect to bender I get the following output with my verbose ssh connection debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/bozo/.ssh/.ssh/identity debug1: Trying private key: /home/bozo/.ssh/.ssh/id_rsa debug1: Trying private key: /home/bozo/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey). It only offers the id_rsa key, as you can see above. Is this correct? If so why? How do I get it to offer more keys? I know it is a problem I see intermittently, because I at home I have multiple keys without much trouble. I would also appreciate a overview on how the pub and private keys interact with the client and server. I thought I had a pretty decent idea, but apparently I am missing something. Please and thank you.

  Read the article

• D key not working on Ubuntu

  - by Jonathan

  For some inexplicable reason the capital d key on my Ubuntu system is no longer producing output. Hitting caps lock and then d produces a D. I've tried multiple keyboards and the issue is the same. There's nothing bound to Shift+d under System Preferences Keyboard Shortcuts. xev produces the following: shift + a KeyPress event, serial 36, synthetic NO, window 0x4c00001, root 0x27a, subw 0x0, time 31268952, (130,-16), root:(1000,525), state 0x10, keycode 62 (keysym 0xffe2, Shift_R), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 36, synthetic NO, window 0x4c00001, root 0x27a, subw 0x0, time 31269376, (130,-16), root:(1000,525), state 0x11, keycode 38 (keysym 0x41, A), same_screen YES, XLookupString gives 1 bytes: (41) "A" XmbLookupString gives 1 bytes: (41) "A" XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x4c00001, root 0x27a, subw 0x0, time 31269584, (130,-16), root:(1000,525), state 0x11, keycode 38 (keysym 0x41, A), same_screen YES, XLookupString gives 1 bytes: (41) "A" XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x4c00001, root 0x27a, subw 0x0, time 31269608, (130,-16), root:(1000,525), state 0x11, keycode 62 (keysym 0xffe2, Shift_R), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False shift + d KeyPress event, serial 36, synthetic NO, window 0x4c00001, root 0x27a, subw 0x0, time 31102792, (115,-13), root:(985,528), state 0x10, keycode 62 (keysym 0xffe2, Shift_R), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False FocusOut event, serial 36, synthetic NO, window 0x4c00001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 36, synthetic NO, window 0x4c00001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 36, synthetic NO, window 0x0, keys: 2 0 0 0 0 0 0 64 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 KeyRelease event, serial 36, synthetic NO, window 0x4c00001, root 0x27a, subw 0x0, time 31103104, (115,-13), root:(985,528), state 0x11, keycode 62 (keysym 0xffe2, Shift_R), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False

  Read the article

• Unity's gone! How do I get it back?

  - by Kelley

  Earlier today my Unity desktop disappeared: I got a black screen with white text, but it disappeared too quickly for me to read. When the desktop reappeared, it was the Ubuntu Classic desktop. I used $ unity --reset but that did not do anything. I tried rebooting so I could choose unity from the list when I logged in, but although there was Ubuntu choice, there was no unity listed (but classic was listed). I was able to install Unity 2D and am using that, but really want to get 3D back. I had been using Ubuntu without problems for several weeks when this happened. My graphics card is onboard a Dell Latitude desktop - a couple years old - and is reported as an Intel G33/G31. I've looked at other requests for help here, and tried suggestions when they seemed to relate to similar problems, but nothing seems to work so far. Any ideas? Thanks! This is part of the output of my latest attempt to run unity --reset Window manager warning: 0x3e01c35 () appears to be one of the offending windows with a timestamp of 1309472834. Working around... Window manager warning: last_user_time (1309473695) is greater than comparison timestamp (1126160). This most likely represents a buggy client sending inaccurate timestamps in messages such as _NET_ACTIVE_WINDOW. Trying to work around... Window manager warning: 0x4c0046c (mdk@Habane) appears to be one of the offending windows with a timestamp of 1309473695. Working around... Window manager warning: Received a NET_CURRENT_DESKTOP message from a broken (outdated) client who sent a 0 timestamp Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x4c0046c (mdk@Habane) Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.

  Read the article

< Previous Page | 371 372 373 374 375 376 377 378 379 380 381 382  | Next Page >