Search Results

Search found 128038 results on 5122 pages for 'windows terminal server'.

Page 376/5122 | < Previous Page | 372 373 374 375 376 377 378 379 380 381 382 383 | Next Page >

Windows Server 2008 R2 Virtual Network Setup

- by jpearl01

Hi all, Some background: I'm very much new to networking in general, and virtualization in particular. I'm trying to set up a series of VMs as we are transitioning to a thin client setup. I have been supplied a limited number of static ip addresses. The server is located in an offsite building which houses the network we use to connect to the internet, share folders etc. The setup I've been trying to go for is this: The host OS (Windows Server 2008 R2) is bound to one nic using one of the static ips (say, Nic1 and ip 10.255.6.61). I've set up another external virtual network attached to another physical nic , and a virtual private network attached to no nic. There is one VM running the same os (as the host). This VM is connected to both the external virtual network (and uses another static ip say Nic2 and ip 10.255.6.62) and also to the virtual private network (I gave it a static random ip 192.168.88.1 subnet mask 255.255.255.0). This virtual private network is connected to all the other VMs. I'd like to share the internet connection with all the other VMs on the private virtual network, and so I installed the RRAS role on the server connected to Nic2, and selected the option to share the internet over the vpn. I've run through the RRAS wizard a few times, trying different configurations, but none of them seem to be letting the other vms connect to the 'net. The vms seem to connect to the virtual private network fine, they are assigned an ip address and everything, but no internet, and no rest of the network either. The other problem is in general I connect to the vms with RDP. Will that be possible with a setup like this? i.e. will the vms show up as computers on the network? If not, what are my other options? Thanks! ~josh

Read the article
Implementing an isolated guest WLAN via IPSec VPN on Windows

- by sysadmin1138

We are attempting to set up a guest WLAN network that is isolated from the rest of our network. This is proving difficult due to a couple of technical reasons. My first choice was to use a separate VLAN, on which our Firewall's handy WLAN port would handle DHCP, DNS and the network isolation we need. Unfortunately, due to the fact that our main office and our Internet connection itself are in different locations connected by way of a Metro Ethernet connection, I'm at the mercy of our ISP for VLAN transit. They won't pass a second VLAN between our two sites. And my hardware doesn't support 802.1ad "Q-in-Q", which would also solve this problem. So I can't use the VLAN method for isolation. At least not without spending money. As our Firewall can handle IPSec site-to-site VPN connections, I hope it is possible to connect a Server 2008R2 (standard) server I have in the office location to the WLAN and provide gateway services to the firewall. Thusly: Unfortunately, I don't know if it is possible to connect the two this way. The firewall has a pretty flexible IPSec/L2TP implementation (I've used it to connect iPads in the wild), but is neither Kerberized or supports NTLM. The Connection Security Rules view on the Windows server seems to get close to what I think needs to be done, but I'm failing on figuring out how to get it to do what I need it to do. Is this even possible, or do I need to pursue alternate solution?

Read the article
Disabling LDAP Signing on Windows PDC in Local Policy

- by Golmaal

I just tripped over my own feet it seems. Playing around on a Windows 2008 R2 server (set up as domain controller), I was intrigued by certain warning event (event id 2886) which says: "To enhance the security of directory servers, you can configure both Active Directory Domain Services (AD DS) and Active Directory Lightweight Directory Services (AD LDS) to require signed Lightweight Directory Access Protocol (LDAP) binds." So I thoughtlessly did some Googling and set the relevant policies which enforce LDAP signing. Now I don't remember but I may have done that using Local Policy. Now I have setup a pfsense box which must authenticate AD users via LDAP. While the firewall can communicate over secure channel, it is difficult to manage the same for other packages such as Squid and SquidGuard. So now I have to disable i.e. undo those policy changes. The problem is that they are greyed out! The policies in question are LDAP server signing and LDAP client signing. I don't remember what I did but when I access these policies from Local Policy editor on the server, they are set to "Require Signing" and are greyed out. The same policies can still be set via Default Domain Controller option in Group Policy editor. So how can I reset these greyed out policies? Thanks

Read the article
Problem connecting to remote network using demand-dial VPN interface with Windows Server 2003

- by Mike Forman

I have a Windows 2003 server (SP2) that I'm trying to set up route traffic from my local network using a VPN My local network has the following components: Broadband router (192.168.0.1) Windows Server with a single NIC running RRAS (192.168.0.2 def. gateway = 192.168.0.1) Client Machine (192.168.0.3 def. gateway = 192.168.0.1) Using a VPN connection, I am trying to access a remote machine (10.0.0.1 for example) I configured RRAS with a demand-dial interface for the VPN and set it to be a persistent connection. As part of that setup, a static route to 10.0.0.0 (255.255.0.0) was created. When at the console of the server, I can ping 10.0.0.1 with no problems I added a route on the client machine using the following command: ROUTE ADD 10.0.0.0 MASK 255.255.0.0 192.168.0.2 If I run tracert 10.0.0.1 from the client, the first hop is to 192.168.0.2 which tells me that route is working. However, I cannot ping 10.0.0.1 from the client machine. What am I missing? Hopefully something simple.

Read the article
Windows Server 2008 R2 Virtual Network Setup

- by jpearl01

Some background: I'm very much new to networking in general, and virtualization in particular. I'm trying to set up a series of VMs as we are transitioning to a thin client setup. I have been supplied a limited number of static ip addresses. The server is located in an offsite building which houses the network we use to connect to the internet, share folders etc. The setup I've been trying to go for is this: The host OS (Windows Server 2008 R2) is bound to one nic using one of the static ips (say, Nic1 and ip 10.255.6.61). I've set up another external virtual network attached to another physical nic , and a virtual private network attached to no nic. There is one VM running the same os (as the host). This VM is connected to both the external virtual network (and uses another static ip say Nic2 and ip 10.255.6.62) and also to the virtual private network (I gave it a static random ip 192.168.88.1 subnet mask 255.255.255.0). This virtual private network is connected to all the other VMs. I'd like to share the internet connection with all the other VMs on the private virtual network, and so I installed the RRAS role on the server connected to Nic2, and selected the option to share the internet over the vpn. I've run through the RRAS wizard a few times, trying different configurations, but none of them seem to be letting the other vms connect to the 'net. The vms seem to connect to the virtual private network fine, they are assigned an ip address and everything, but no internet, and no rest of the network either. The other problem is in general I connect to the vms with RDP. Will that be possible with a setup like this? i.e. will the vms show up as computers on the network? If not, what are my other options? Thanks! ~josh

Read the article
Emails Generated From Our Linux Server are Blocked By Our Exchange Server (That Has Barracuda)

- by Scott

We have our company website hosted on a Linux machine. It is sending mail via postfix. The emails are working and being sent to all email clients like Gmail. However, we are not receiving the emails on our exchange server. When we look at the logs, we see that the connection is being refused, presumably by the exchange server. postfix/qmgr[11865]: DA6D42FF13: from=<[email protected]>, size=3166, nrcpt=1 (queue active) postfix/smtp[12474]: connect to mail.sanitizeddomain.com[XXX.XXX.XXX.XXX]:25: Connection refused postfix/smtp[12474]: DA6D42FF13: to=<[email protected]>, relay=none, delay=172915, delays=172914/0.03/0.07/0, dsn=4.4.1, status=deferred (connect to mail.sanitizeddomain.com[XXX.XXX.XXX.XXX]:25: Connection refused) We do run Barracuda. We cannot telnet from the linux machine to our mail server b/c we get the same message.

Read the article
Move files from ftp server to s3

- by lev

I would like to set up an ftp server, where users will upload files, and for each file, put it on s3 storage, and delete it from the ftp server. (the server runs on ec2 ubuntu) Here are the stuff I already tried, with no success.. Mount s3 bucket using s3fs. I followed those instructions, but there is a bug in the latest version of s3fs, that prevents it from working. The bug was fixed on the develop branch, but I don't want to use unstable version on my production. Use vsftpd and using s3cmd sync via cron to sync the files periodically. The problem with that approach, is that s3cmd can start running in the middle of a file upload, and start synching the incomplete file. Also s3cmd doesn't give any feedback it the sync fails, so I have no way of knowing if I can delete the files after the sync command finished running. Use pure-ftpd's upload script feature (which allows to run a script after a file is finished uploading), but I noticed that if the file upload was failed in the middle, the script will run anyway, and I have no way of knowing if the upload was successful or not. I've been at it for a few days now, and I'm at a loss here. Any suggestions will be welcomed.

Read the article
Installing sphinx on a web hosting server

- by fiftyeight

I want to install sphinx search on a web-hosting server. I'm on a Linux VPS with hostgator, but I never actually installed anything on a remote server so this will be a first time for me. If there's anyone here who installed sphinx it's really help me I had some problems when using sphinx on my PC with the permissions and the MySQL files, eventually I got it working on my PC. Anyway, I'd me really grateful if anyone can help me with some questions Do i need root access to install sphinx? I have root access to the server but I'd connect to it as a normal user since doing stuff as root is always less secure. can anyone tell me by what user I need to execute the indexer and the search daemon? Should I use root access in order to this? when I did it as a normal user on my PC it gave me some trouble with the PID file and the log files. last time I executed the search deamon I executed it as a normal user and it gave me some trouble, I created the folder /var/log/ for log files and did chmod 777 on it, but still when I executed the search daemon it created the PID file "searchd.pid" file but with no permissions for some reason, any idea why? Thanx in advance. fiftyeight

Read the article
IBM Server searching for secondary server

- by user1241438

I just bought the following server IBM System x3950 Server, 4 x 3.0GHz Dual Core, 32GB, 6 x 73.4GB 10K SAS RAID, 256MB BBWC, 2x Power, CD-RW/DVD When i boot it up, it says "Searching for secondary server" and hangs their for almost 10 mins. After 10 mins, it says timeout on searching chassis 2. But after this it proceed to boot the OS properly. But my frustration, i need to wait for almost 15 mins to boot everytime. How do i prevent this error message.

Read the article
How can one automatically logon to multiple user accounts in Windows 2008 R2

- by DJFriar

We are running a Windows 2008 R2 Terminal Server. Currently, we have local admin accounts created, one for each client that runs our software (SiteA, SiteB, etc). We need these user accounts to auto logon if the server is rebooted. The accounts need to run a full user environment, as we will login remotely at times via TeamViewer to check processes and makes changes, etc. We are using the Registry Hack method now, but that only allows one account to logon. I've seen a program called LogonExpert, but I've never heard of it so I don't know how trust worthy it is, etc. Is there any other way to auto logon to multiple accounts in our environment? Currently the users are local users, but we could make them domain users if that is required.

Read the article
How to Upgrade PHP 5.2 to 5.3 on Windows Plesk Panel 8.2

- by Jagat Sheth

I need to upgrade my server PHP version becasue of Wordpress New version not support PHP 5.2. On My server windows 2003 stansard edition x64 with SP1 installed, IIS 6.0, MySQL 4.1, Plesk Panel 8.2. I have follow listed steps on plesk KB. http://kb.parallels.com/6670 How to update PHP 5 on a Windows server with Parallels Plesk Control Panel 8.x and 9.x installed. In order to upgrade PHP 5 to the necessary version (other than shipped with Parallels Plesk), please perform the following steps: Stop Plesk services (‘Control Panel’ and all that are included in the ‘Plesk Run-Time’ section) Rename folder %plesk_dir%\Additional\PleskPHP5 to the orig_PleskPHP5 Create a new folder %plesk_dir%\Additional\PleskPHP5 Download necessary version of PHP, unzip its content, and copy it to the newly created folder PleskPHP5 Copy the file php.ini from the old folder orig_PleskPHP5 to the new one Make sure the permissions are inherited Start Plesk services Click the "Refresh" button in the Components Management section in Parallels Plesk Panel and check if you can see the new PHP version there After follow steps when I open a PHP info it shows me specified module could not be found. If anybody know solution Kindly help me is highly priority. I am very thankful if any one help me to solve this ASAP. Thanks and regards, Jagat Sheth

Read the article
Certificates in SQL Server 2008

- by Brandi

I need to implement SSL for transmissions between my application and Sql Server 2008. I am using Windows 7, Sql Server 2008, Sql Server Management Studio, and my application is written in c#. I was trying to follow the MSDN page on creating certificates and this under 'Encrpyt for a specific client', but I got hopelessly confused. I need some baby steps to get further down the road to implementing encryption successfully. First, I don't understand MMC. I see a lot of certificates in there... are these certificates that I should be using for my own encryption or are these being used for things that already exist? Another thing, I assume all these certificates are files are located on my local computer, so why is there a folder called 'Personal'? Second, to avoid the above issue, I did a little experiment with a self-signed assembly. As shown in the MSDN link above, I used SQL executed in SSMS to create a self-signed certificate. Then I used the following connection string to connect: Data Source=myServer;Initial Catalog=myDatabase;User ID=myUser;Password=myPassword;Encrypt=True;TrustServerCertificate=True It connected, worked. Then I deleted the certificate I'd just created and it still worked. Obviously it was never doing anything, but why not? How would I tell if it's actually "working"? I think I may be missing an intermediate step of (somehow?) getting the file off of SSMS and onto the client? I don't know what I'm doing in the least bit, so any help, advice, comments, references you can give me are much appreciated. Thank you in advance. :)

Read the article
Possible attack on my SQL server?

- by erizias

Checking my SQL Server log I see several entries like this: Date: 08-11-2011 11:40:42 Source: Logon Message: Login failed for user 'sa'. Reason: Password did not match for the login provided. [CLIENT: 56.60.156.50] Date: 08-11-2011 11:40:42 Source: Logon Message: Error: 18456. Severity: 14. State: 8. Date: 08-11-2011 11:40:41 Source: Logon Message: Login failed for user 'sa'. Reason: Password did not match for the login provided. [CLIENT: 56.60.156.50] Date: 08-11-2011 11:40:41 Source: Logon Message: Error: 18456. Severity: 14. State: 8. And so on.. Is this a possible attack on my SQL Server from the chineese???! I looked up the IP adress, at ip-lookup.net which stated it was chineese. And what to do? - Block the IP adress in the firewall? - Delete the user sa? And how do I protect my web server the best?! :) Thanks in advance!

Read the article
Web server replica not working in other server

- by user761076

I have a Drupal installation (php+mysql) in a server, and I'm trying to copy this installation to another server with the same configuration, same physical and virtual path, same db configuration, etc. The thing is, in my new server I get the homepage to work, but not the inner pages, so I guess has something to do with rewrite (mod_rewrite is installed) (both .htaccess are the same). When I access http://localhost/myweb/content/mypage I get a 404 or a "Forbidden" if I uncomment this in httpd.conf (original httpd.conf does not have this entry): <Directory path/to/docs"> DirectoryIndex index.php index.html Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> Any clue? Thank you

Read the article
How can I tell why I have access to a file share on Windows Server

- by Joel

I have a file share on a Windows 2008 R2 server in a AD domain (call it \SECURESERVER\STUFF) and I am not sure if I have the share and folder permissions set up right. I noticed the problem when I set up new server (WORKGROUP\FOREIGNSERVER) that was not joined to the domain and tried to copy some files off of \SECURESERVER\STUFF. I was surprised to find that when I tried to access the files, it did not prompt me for a username and password and proceeded to give me full access to the files. That worried me so I tried the same thing on some workstations that were not in the domain and they did NOT have the same behavior (they did prompt for a username/password as desired/expected). So, I think there is something peculiar about FOREIGNSERVER. I am logging into it with a local admin account, but my domain and SECURESERVER should know nothing of this server. I've carefully gone through the share and folder permissions on the share but I can't find the reason that FOREIGNSERVER has access. How can I find out why FOREIGNSERVER has access to SECURESERVER?

Read the article
Default user logon on Windows Server system

- by Robert Koritnik

I installed Remote Desktop Services role (ex Terminal Services) on my Windows Server 2008 R2 machine. After installation when I try to logon locally, there's no default user as it used to be. Can I tweak group policy to have my default user back? I did enable to remember last logon user, but it didn't work... Obviously RDS (ex TS) ignores this policy setting. Additional note: I'm not connected to a domain. It's a standalone development machine running server OS. No domain needed for it.

Read the article
Cannot access Samba Share that is on Linux

- by doug

I have 3 virtual machines; Windows Server 2012, Windows 8, and CentOS Linux. The Server is configured with active domain. The CentOS VM has a Samba Share which has rights for the domain Administrator. Now, the Windows Server 2012 DC can successfully locate the share, but cannot access it (with Admin) ? Is it not possible for the Server to have access to it has Domain Client Admin, not Server Admin ? Hope this is clear? Thanks

Read the article
windows 2008 r2 iis worker proccess memory usage increase

- by nLL

I have this web site written in c#. around 400-500 users online at any time. it was on windows 2008 32 bit machine before and never ever locked/slowed down due to increased memory consumption up until i upgraded it's server to win 2008 r2 64 bit. Old server had only 4 gig ram and quad core cpu at 2ghz. site was working just fine. since i've upgraded the server i noticed (2 times with in 10 days) it started to eat ram. last night it went up to 4 gb ram. with ram increase response slows down quite a lot. recycling app pool doesn't help. I have to restart it's worker process to recover. i've noticed this usually happens if there are continuous errors. as i didn't change anything in the code am i safe to assume it is not related to memory leak in the code? did anyone came across something like that? same thing happens if i create continuous errors with classic asp. thanks

Read the article
RDP suggesting a user name when connecting to a server

- by Neolisk

Prior to Event X, RDPing to Server 2003 always caused the user name appear blank and Login to be enabled, so you could pick to which domain you would log in. For us it's either local or our domain. Since a recent Event X a domain + user name is being suggested for every server and it's not the most recently used user name. If you remove it manually from RDP dialog, it's still being pre-populated for you, and then at the next available opportunity it returns into General/User name option of RDP dialog. So user name field comes pre-populated and you cannot change to log in locally (only if you manually erase domain specifier - everything before \) - Log in to option is disabled by default. We did not do any changes to our domain or client machines, so I am suspecting some Windows update caused it (and this being Event X). Interesting fact - it does not consistently happen on all machines, and some can login to some servers fine, while other servers keep suggesting a default user name. What could be that Event X and is there a way to fix it? EDIT: I tried this - How to clear remote desktop connections history and specifically this part of it: reg delete "HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\UsernameHint" /f The problem still persists.

Read the article
I can't change mysql port (5.6.12) changing the lines of my.ini (windows 8)

- by videador

I was trying to change the port of my mysql server in my local machine but i can't. The version of mysql is 5.6.12, is an installation from wamp and I am on Windows 8. I change these lines in my my.ini file located in (C:\wamp\bin\mysql\mysql5.6.12). [client] #password = your_password port = 3307 socket = /tmp/mysql.sock [wampmysqld] port = 3307 socket = /tmp/mysql.sock key_buffer = 16M max_allowed_packet = 1M The previous values were 3306. Ok then I've reset the server installed, but it doesn't works, the mysql server is still running on 3306. Then, I rename the path of the services with this, to make sure that the my.ini is read by the mysql instance. c:\wamp\bin\mysql\mysql5.6.12\bin\mysqld.exe --defaults-file="C:\wamp\bin\mysql\mysql5.6.12\my.ini" wampmysqld But nothing, it stil doesn't works. My last bullet was to copy the content of my.ini to a file my-default.ini (a file that is placed in C:\wamp\bin\mysql\mysql5.6.12\ and that I don't know what is its mission). However it still doesn't work and the port is still 3306.

Read the article
Server load increases by lot of httpd request with same PID

- by user3740955

I can see that my server load increases to more than 200-300 range. Before 1 week the maximum load was around 20-25. In top and ps -ef i can see a lot of httpd threads and the PPID of most of the httpd request are of the same PID. When i verified this the parent process ID is of root. Please let me know how i can reduce the server load. I have searched a lot for this but not able to find out a proper solution for this. Please let me know. Please see below a part of the top output. apache 29698 2062 1 16:54 ? 00:00:00 /usr/sbin/httpd apache 29700 2062 3 16:54 ? 00:00:00 /usr/sbin/httpd apache 29701 2062 10 16:54 ? 00:00:02 /usr/sbin/httpd apache 29702 2062 0 16:54 ? 00:00:00 /usr/sbin/httpd apache 29703 2062 1 16:54 ? 00:00:00 /usr/sbin/httpd apache 29705 2062 0 16:54 ? 00:00:00 /usr/sbin/httpd apache 29706 2062 3 16:54 ? 00:00:00 /usr/sbin/httpd apache 29707 2062 0 16:54 ? 00:00:00 /usr/sbin/httpd apache 29708 2062 1 16:54 ? 00:00:00 /usr/sbin/httpd apache 29709 2062 0 16:54 ? 00:00:00 /usr/sbin/httpd apache 29710 2062 0 16:54 ? 00:00:00 /usr/sbin/httpd apache 29711 2062 0 16:54 ? 00:00:00 /usr/sbin/httpd apache 29712 2062 0 16:54 ? 00:00:00 /usr/sbin/httpd Server version: Apache/2.2.3

Read the article
Combine multiple network interfaces to connect to a dedicated server

- by Dženis Macanovic

this is an underpaid employee writing, who's apparently responsible for all the IT stuff in a very small (non-IT) company. Today said company got a bunch of PCs/workstations, a switch, a computer that's supposed to be used as a router, two DSL connections (each 16 MBit/s downstream and 1 MBit/s upstream) and a dedicated server which is hosted and managed professionally by a larger local company with some decent connection speed (1 GBit/s both directions if I'm not mistaken). This is what I've set up (note I'm not making use of the second DSL connection at all)... ETH0 ETH1 [ SWITCH ]---[LINUX DEBIAN ROUTER]---[DSL MODEM 1]---[INTERNET] | | | PC1 | | PC2 | ... ... when my boss asked me, if it was somehow possible to get 32 MBit/s downstream and 2 MBit/s upstream. At that time I replied "no" without thinking too much about it. Now I've just had the following idea... ETH1 ETH0 ETH0 ,---[DSL MODEM 1 (NON-STATIC IP)]---, ,---, ETH0 [ SWITCH ]---[LINUX DEBIAN ROUTER] [INTERNET] [LINUX DEBIAN SERVER]---[INTERNET] | | | '---[ DSL MODEM 2 (STATIC IP) ]---' '---' PC1 | | ETH2 ETH0 PC2 | ... ... but I have absolutely no clue how to implement that. Would that even be possible? What would the masquerading rules look like on the router? What about the server? I didn't find anything on the internet, mainly because I couldn't come up with any good keywords to search for to begin with. English obviously isn't my first language. Thanks in advance for your time!

Read the article
Windows Server 2008 Alerting to Low memory

- by t1nt1n

I have a file and print server running on Windows 2008 R2 fully patched in a VSphere environment (ESXi 5.1 fully updated). Every evening between 19:20 and 19:30 our monitoring software reported that the available memory is 1% and performance is dire. There is nothing in the event logs to point to an issue. At this point in the evening I am general the only user on the system to check to see why these alerts are going off. Things I have done; Checked to see if any backups are running – None at all. Checked Scheduled tasks – None before or during this time period. Moved the VM to another host. AV is disabled to rule out that as the issue. The server does not have any problems during the day with memory when fully loaded with about 50 users. The server did have 4GB ram provisioned but I have increased this to 5Gb. Running PrefMon at the time (I will save the graphs tonight) There very little CPU usage at the time but RAM usage goes up.

Read the article
5 year old server upgrade

- by rizzo0917

I am looking to upgrade a server for a web app. Currently the application is running very sluggish. We've made some adjustments to mysql (that's another issue in itself) and made some adjustments so that heaviest quires get run on a copy of the database on another server was have as a backup, however this will not last that much longer and we are looking to upgrade. Currently the servers CPUs are (4) Intel(R) XEON(TM) CPU 2.00GHz, with 1 gig of ram. The database is 442.5 MiB, with about 1,743,808 records. There are two parts of the program, the one, side a, inserts and updates most of the data. Side b, reads the data and does some minor updates. Currently our biggest day for side a are 800 users (of 40,000 users all year) imputing the system. And our Side b is currently unknown, however we have a total of 1000 clients. The system is most likely going to cap out at 5000 side b clients, with about a year 300,000 side a users. The current database is 5 years old, so we can most likely expect the database to grow pretty rapidly, possibly double each year (which we can most likely archive older records if it comes to that). So with that being said, should we get a server for each side of the app, side a being the master, side b being the slave, any updates made on side b are router to side a. So the question is should i get 2 of these or 1. 2 x Intel Nehalem Xeon E5520 2.26Ghz (8 Cores) 12GB DDRIII Memory 500GB SATAII HDD 100Mbps Port Speed And Naturally I would need to have a redundant backup so it could potentially be 4 of them.

Read the article
How to recursively change folder permissions on WAMP server [closed]

- by user1543227

How do I change folder permissions recursively in Windows 7? Specifically, for my WAMP server, I want to change the permissions of my "www" folder so that its contents can be viewed over the Internet, and I want all of its subfolders to have the same permissions. Currently, for each folder, I'm getting the following message in my browser: "You don't have permission to access / on this server." I believe there's a simple command I could enter in a terminal for recursively changing folder permissions for global access; I just don't know what it is.

Read the article

< Previous Page | 372 373 374 375 376 377 378 379 380 381 382 383 | Next Page >