Search Results

Search found 16748 results on 670 pages for 'port block'.

Page 380/670 | < Previous Page | 376 377 378 379 380 381 382 383 384 385 386 387  | Next Page >

• Straight cable or cross over cable?

  - by om sai

  I have pppoe internet connection. My ISP provides connections like this: ISP->media converter(fiber)->8 port switch(TP Link TL-SF1008D)->to individual internet connection account holders (like me) Now the connection between the media converter and the switch is done using 4 pair cross over cat5 cable and I would like to connect the cable running from the switch to the router and through router to my PC. So what type of cable should I use to make the connection between the switch and the router (straight thru cable or cross over cable)? The point I am trying to make is I am able to connect to the internet using straight through cable between the switch and my PC but when I connect the same cable between the switch and the router and from router to my PC I am not able to connect to the internet. Also, if I am using the 2 pair cable (instead of 4) between the switch and the router I am able to connect to the internet but same is not true in case of 4 pair cat5 cable.

  Read the article

• Computer and internet use on a boat?

  - by dlamblin

  Let's assume that I seriously would like to be able to use my computer as easily and as carefreely while on a boat as I do while at home. In short, if I were on a boat for extended periods, such as two weeks at a time and occasionally over a few days out of port (this would be a 2 person sailing vessel), what would my options be for power, durability, and of course, internet access? I want more than just email, as I will likely keep doing a tad of development, and will be looking at google earth from time to time. I am already assuming that we're going with some kind of laptop, maybe even a macbook pro 12". I personally feel that netbooks are underpowered. And the last computer that I got a boat-friendly rating for was a ZX Spectrum, which was before the internet, and was likely due to it's 12vdc-happiness.

  Read the article

• Excel scatter chart with multiple date ranges

  - by Abiel

  I have multiple blocks of time series data on an Excel sheet, with each block having its own set of dates. For example, I might have dates in column A, values in column B, and then dates in column D and values in column E. The values in B go with the dates in A, and the values in E go with the dates in D. The dates in A and D may not be the same. I would like to create a scatter chart with a time category axis that is the union of my two input date ranges in columns A and D. If I select all the data and then go insert chart (in Excel 2010), Excel treats only column A as the X axis, and looks at D as just another set of values. I can get Excel to do what I want by first just charting columns A and B, then selecting D and E and copy-pasting onto the chart. However, I would like to avoid this two-step procedure if possible.

  Read the article

• How do you enable syslogd to accept incoming connections on Snow Leopard from remote loggers?

  - by Emmel

  How do I get syslogd to accept incoming connections from remote hosts on Snow Leopard? I'd like to centralize logging such that various devices and systems send logs to Snow Leopard's syslogd, which normally hangs out on UDP 514. However, I'm unable to get them to successfully be accepted by good ole syslogd. I tcpdumped on the Snow Leopard box to verify that packets are being spouted to port 514 -- they are. I checked that syslogd is listening on 514 -- it's not. Googling around told me that, on older versions of OSX (don't you love the way things change so rapidly on OSX), one just had to add a flag to the syslogd daemon to allow remote; one did this in com.apple.syslogd.plist. However the syslogd daemon has no flags (at least in its man page) that suggests any remote anything. What's the solution to this? Secondary, less import but relevant question: What's 'newsyslog'? I see a plist file but it's not running (apparently). Thanks

  Read the article

• Unknown MySQL server host - connection problem

  - by Zukas

  I am new to databases and I have been asked to look at a few tables and see how many records they have and some other information. I cannot access phpMyAdmin through cPanel, which is how I've always done it on my own server. I decided to download MySQL Workbench. I enter in all the information is asks: Hostname: mysite.startlogicmysql.com Port: 3306 Username: user. I press connect and get this Unknown MySQL server host 'mysite.startlogicmysql.com' (11004) Am I using the wrong hostname? I've seen a server name, a hostname in the server variables list which is something like custsql.eigbox.net and the server itself is custsql.eigbox.net In both cases the custsql is a little different than what I posted. I am not sure which one to use. If there is anything else anyone needs to know I can tell you. Tanks.

  Read the article

• Protect me from this perl syn flood script [closed]

  - by Luka

  Possible Duplicate: How to best defend against a “slowloris” DOS attack against an Apache web server? As everybody here I was interested in hacking in a period of time, using a perl scripts. CSF is protecting me from every perl script which can make damage. But not from this one here: http://pastebin.com/CfRiSVkQ It's Syn Flood script, when I attack my dedicated server from another dedicated with 100MBPS link csf is detecting the attack and he always block attackers address but I am flooded and sites are down, I get email from csf, but attack is still damaging sites! Then I need to restart httpd, csf and sites are online again...

  Read the article

• Configure VPN to access remote LAN network on Windows7

  - by PiotrK

  Situation: I have two Windows7 machines (PC and laptop). I've set PC as VPN server and laptop as VPN client using default built-in W7 network tools. I've disabled use default gateway in remote network on client machine, so client don't try to route all communication through VPN. I've routed port 1723 (TCP/UDP) on NAT to my server and enabled IPSec/PPTP/L2TP passthrough I've put my laptop in indepedent network (basically I've connected it via 3G network), connected to VPN server and checked ipconfig /all I've get: IP Address: 192.168.1.101 Mask: 255.255.255.255 Gateway: (none) LAN mask in server LAN network is 255.255.255.0 - I am surely missing something obvious, but Google doesn't give me any good advices; How can I access local LAN network from remote VPN client? How can I access local shared documents?

  Read the article

• Three displays, one video card and no eyefinity mode

  - by José F. Romaniello

  I am looking for a video card to run three monitors, it could be hdmi, dvi or vga. I want the three monitors to show an extended desktop but as three different desktops with maybe different resolutions, so when i maximize something it should be maximized only in one monitor. The information seems confusing, I think eyefinity tricks the OS to make it looks like one big display. I am sure I dont want this. So my question(s) is, is there a video card in the market that support 3 displays without eyefinity? Or can I use an eyefinity enabled card ( with one active display port) to run three monitors and disable eyefinity from the driver settings or something?

  Read the article

• Are Motherboards for the Acer Aspire One AOA150 Netbook Compatible with the AOA110?

  - by Mindstormscreator

  I have an Acer Aspire One ZG5 AOA110-1588 netbook, and the motherboard doesn't have a port for a SATA 2.5 inch hard drive; it only supports this slow 8GB SSD type drive. Through research I've discovered that the AOA150 motherboards do have a SATA slot, and the bottom plate of these laptops have an appropriate protrusion for the drive to fit in (for example, compare this to this). The AOA110 and AOA150 models are very similar in appearance and specs. I've even seen tutorials that involve soldering a SATA connector onto the AOA110's motherboard, essentially creating an AOA150 motherboard (right?) So, could I just swap out the motherboard in my netbook with the MBS0506001? (I'd post another link to the actual board but can't because of the spam prevention...) I assume I would also need to purchase and replace the bottom cover with a larger one and possibly get a hard drive caddy as well...? Thanks!

  Read the article

• Can you use a USB dongle inside a VMWare ESX Virual Machine?

  - by Keith Sirmons

  Howdy, I need to know if a USB dongle that is required as a license key for a piece of software will accessible from the physical host machine. This will be a small vSphere 4 installation targeting the quick backup and system restore capabilities of VMWare, not specifically HA, so I am not to worried about the virtual machine automatically failing over to another physical machine and the dongle not being accessible. Does ESX have the capability to map a physical USB port or device to a specific Virtual Machine? I believe this is the dongle: Sentinal Superpro USB Dongle by Rainbow Technologies Thank you, Keith

  Read the article

• Powershell import-module webadministration

  - by David

  Every time I execute this command invoke-command -computername REMOTEPC -scriptblock { import-module WebAdministration; new-item "$env:systemdrive\inetpub\testsite" -type directory; New-WebSite -Name TestSite -Port 81 -PhysicalPath "$env:systemdrive\inetpub\testsite" } I get the following error Invalid class string (Exception from HRESULT: 0x800401F3 (CO_E_CLASSSTRING)) + CategoryInfo : NotSpecified: (:) [Get-ChildItem], COMException + FullyQualifiedErrorId : System.Runtime.InteropServices.COMException,Microsoft.PowerShell.Commands.GetChildItemCommand The website is created successfully as far as I can see. The following command gives the same error when enumerating the testsite Invoke-Command -computername REMOTEPC { import-module webadministration; dir -path IIS:\Sites\ } Name ID State Physical Path Bindings PSComputerName Default Web Site 1 Started http *:80: REMOTEPC Invalid class string (Exception from HRESULT: 0x800401F3 (CO_E_CLASSSTRING)) + CategoryInfo : NotSpecified: (:) [Get-ChildItem], COMException + FullyQualifiedErrorId : System.Runtime.InteropServices.COMException,Microsoft.PowerShell.Commands.GetChildItemCo mmand Any suggestions would be appreciated

  Read the article

• How to set up DHCP-configured access through a Linux box?

  - by marcusw

  I would like an old desktop box to use my laptop as a router to access the internet. Here is my setup: I have one ethernet port in the side of my laptop which I want to use to get internet access to my desktop computer. The laptop is connected to the LAN via a wireless link. Both systems run Linux. The desktop autoconfigures itself using DHCP. The laptop is a Kubuntu system. I do not have any crossover cables, though wireshark on the laptop sees the DHCP requests from the desktop just fine, so I doubt that I need one. What do I have to do to make this work?

  Read the article

• What tools exist for generating "ASCII Tables", if any?

  - by Billy ONeal

  Consider a block like the following: +-----------------------------------+--------------------------+ | In Baseline | Not in Baseline | +---------------+===================================+==========================+ | In Parent # Do Not Report | Mark ACE as AlwaysReport | +---------------+-----------------------------------+--------------------------+ | Not In Parent # Iff parent depth > baseline depth | Report Always | +---------------+-----------------------------------+--------------------------+ I have seen tables like this used quite frequently. For instance, in Requests for Comments (RFC) documents, the standard format of the document is the text format. Another common case is embedding a small table like this into comments of source code. Are there tools which can take a quick and dirty representation of this in Excel, or possibly some textual format, and format it as a table like this?

  Read the article

• Trouble opening my router to my web server [closed]

  - by justin

  Here's the story. I have a webs server created and connected to my router. The website works great when I'm connected to the router, but when I'm off the network I can't access the website. I got the IP for my router by googling "what is my ip." I have opened ports 80 to 10080 to link to the server in the router. THe firewall is off. I can ping the router. One odd thing that I don't understand. When I am in network if I access XXX.XXX.XX.XX:80 I can access the web page no problem. If I access XXX.XXX.XX.XX:81 (or any other port) I get the error "Cannot access server." Any idea what the problem could be? Could it be my ISP?

  Read the article

• Connected 2 routers, but they won't talk

  - by ekolis

  I'm trying to set up a second WLAN at home (since the Nintendo DS firmware won't connect to my WPA-encrypted main WLAN), but when I connect my second router's WAN port to one of my main router's LAN ports, the routers won't talk, and I can't connect wirelessly to the second router. I can still see the second router's WLAN - I am just unable to connect to it. And it seems that even the main router can't see the second router, despite being plugged directly into it - I went to the main router's admin console and pinged the second router (which is receiving an IP address), but it was unable to reach it! Does anyone know what might be wrong? Thanks!

  Read the article

• Configuring Server with no monitor

  - by Scandalist

  Sitting in front of me is an HP DL 380 Generation 4 with no monitor. I'd like to install an OS on the thing but for reasons obvious, I can't. I got excited when I found the ILO port on the back but unless you have a subscription it has limited functionality. I was thinking maybe there was some software out there that booted into some kind of remote access server? When I tested it with a monitor (A friends) I set the BIOS to boot from USB so anything I can load onto a stick should boot. Ideas? Hacks?

  Read the article

• Configuring a Genius GW-7200 Access Point

  - by alex

  I came across an access point we had a few years ago. I'm now trying to get it set up to work on our network. here are a couple of pictures: http://twitpic.com/194u06/full http://twitpic.com/194u0v/full I have plugged this into our network via the network port on the back. I set up a DHCP reservation, based on the MAC address on the back of the access point, however I cannot ping it, nor access the web interface. I've held down the reset button for 10 seconds, to see if that would do anything. Google doesn't come up with anything on the matter :-(

  Read the article

• VPN to Buffalo WHR-HP-G300N produces a Connection Error 807

  - by Darius

  My friend has modem/router from Clear and I have sent him Buffalo router to put it between his Clear device and the Network. I walked him thru establishing VPN in DD-WRT but when I try to VPN I get a VPN Connection Error 807. I am out of ideas how to solve this. Any suggestion? Clear Modem WAN: xx.xx.xx.xx Clearn Modem NAT's to: 192.168.15.XXX Clear Modem DHCP: 192.168.15.2 - 192.168.15.2 (range is limited to that of ONE ip address) Clear Modem DMZ: 192.168.15.2 the LAN of the clear modem is 192.168.15.XXX The DD-WRT IP: 192.168.4.1 Port FWD: 1723 to 192.168.4.1 PPTP server listens on 192.168.4.1 Where is the problem with this setup?

  Read the article

• Remote tunning of jboss using visaulVM

  - by sagarzond

  Hi, I am using visualVM for tunning jboss remotly. I followed following step but unable to get JVM information in visualVM. Start jstatd server on remote machine where jboss running using command jstatd -p 1234 -J-Djava.security.policy=tools.policy In this tools.policy file is added to $JAVA_HOME/bin folder content of tools.policy file is - grant codebase "file:${java.home}/../lib/tools.jar" { permission java.security.AllPermission; }; Start visualVM remote connect on 1234 port using jstat I unable to get information of jboss plz help me........

  Read the article

• ATI radeon hd 5450 Graphics Card Issues

  - by RGM-79FP GM Striker

  I have an Old Dell Optiplex 755 SFF with an Intel Core 2 Processor (windows 7). Now This can hold a PCI-E x16 port. Now I got an ATI Radeon HD 5450 low profile. I plugged and played and it fits without a hitch, the software installed too! , now for the graphics well... It doesn't really work at all as it seems to freeze at the moment that it loads on the windows logo. It loads into safe mode so I'm not really sure what the problem is. Any ideas, I read the dell forums and they should be somewhat compatible... with the specs so I'm at a loss here. and I am a novice here. Ideas? Edit I have tried to reset the cmos,no luck there. I have tried to move the ram as well. nothing big happened.

  Read the article

• On setting up Apache and IIS to share the same IP

  - by miCRoSCoPiCeaRthLinG

  Hello, There are two different web-apps running on two (physically) different servers on our network... one of IIS and another one on Apache - both on port 80 since two machines are accessible by different IPs on our internal network. Now I want to expose both these services to the world. My idea is to somehow make the incoming connection redirect to the appropriate server based on user's choice of subdomain. Example xxx.domain.com maps to the IIS (Internal IP: 1.2.3.4) yyy.domain.com maps to Apache (Internal IP: 5.6.7.8) To the world, both these servers will share the same public IP. What kind of a configuration am I looking at and how do I go about trapping the subdomain requests and redirecting to the appropriate server? Thanks, m^e

  Read the article

• My IPSec VPN isn't allowing me to connect

  - by jbondhus

  I'm following this guide to create an IPsec VPN on a debian server. I followed all the steps, and it still isn't working. If I try connecting to it, I get an error. I've looked for the logs, but I'm not sure where they would be put, other than /var/logs. I aim to be able to browse the internet from my home connection, and access my home network as if it is my local network (eg. access my home fileserver and printers, and screen share my home computers remotely without a complicated port forwarding setup.

  Read the article

• Using pg_connect() with wamp server and postgresql

  - by northlandiguana

  Help! I am trying to connect to a Postgres database and can't get the server to connect. When I execute this php script: $conn = pg_connect("dbname=wikimap user=postgres password=postgis host=localhost port=54321"; if (!$conn) { echo "Not connected : " . pg_error(); exit; } I get this error: <b>Fatal error</b>: Call to undefined function pg_connect() in <b>C:\wamp\www\wikimap\php\pgis.php</b> on line <b>33</b><br /> I have made sure the php_pgsql and php_pdo_pgsql extensions are enabled in the wamp menu and php.ini, and I've read through other topics in this forum and others about connecting wamp to postgres, messing with the httpd.config file and php.ini file and copying libpq.dll between bins, all to no avail. I've been working on this for hours and can't figure out how to get pg_connect to work. Any ideas???

  Read the article

• ubuntu 12.04 server and tftp access violation issue on put command

  - by SMYERS

  I installed tftp as per this document: http://icesquare.com/wordpress/solvedtftp-error-code-2-access-violation/ I followed this to the letter 3 times and every time I put a file I get: root@CiscoCFG:~# tftp localhost tftp put test Error code 2: Access violation tftp root@CiscoCFG:~# tftp localhost tftp put test Error code 2: Access violation If I touch the file name chmod 777 the file then do a put it works perfectly fine. My config is as follows: service tftp { protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = -s /svr/tftp disable = no } the directory /svr/tftp permissions are 777: drwxrwxrwx 3 nobody nobody 4096 Nov 14 10:32 svr This thing should have full permissions as would anyone who wanted to write or read from that directory. I see nothing in the logs im really stumped on this. If the file is already in the directory I can read it all day long, I just cant make NEW files, can not put them, but I can do get's, I can only put to an existing file with permissions @777. Thanks

  Read the article

• Win7 to Win7 Remote Desktop Not working, Xp to 7 working fine

  - by vlad b.

  Hello, I have a small home network and recently i tried to enable remote desktop for one of the pc's. I have a mix of Windows 7, Windows Vista and Xp runing alongside ubuntu, centos and others (some virtual, some real). I have a few Windows 7 pc`s that can be connected to using remote desktop from inside and outside the network (port redirects on routers, etc, etc) and some Xp ones. The trouble is when i tried to do the same thing to a Win7 laptop i discovered i can't connect to it from another win7 pc inside the home network. To sum it up Working: xp -- win7 not working: win7 -- win7 What i tried - disable and enable remote desktop (my computer - remote settings) - removing and adding users to the remote settings window - adding a new user to the machine, administrator or 'normal' user - checking the firewall settings on the machine and set 'allow' to remote desktop for both 'home/work' and 'public'networks Any tips on what should i do next? It displays ' .. secure connection' and after that the window with 'Your security credentials did not work' and it lets me try again with another user/password..

  Read the article

< Previous Page | 376 377 378 379 380 381 382 383 384 385 386 387  | Next Page >