Search Results

Search found 16748 results on 670 pages for 'port block'.

Page 383/670 | < Previous Page | 379 380 381 382 383 384 385 386 387 388 389 390  | Next Page >

• How does bridged networking work?

  - by agz

  How does bridged networking work? I have looked through the virtualbox manuals but nothing extremely technical came up (It was just a generic gloss over of the topic) How does it assign a different ip to the virtual machine but uses the same network card? Why does this different ip (I found using ip addr under linux) not show up under the "attached devices section" of my router but I can port forward to it? How come if I connect to a password protected wifi network, it does not require me to enter my password? Is this multihoming?

  Read the article

• Remote Desktop connection repeatedly aborting

  - by DerKlaus

  I connect to my workplace computer using Remote Desktop. After 1-2 minutes the application freezes to tell me after one more minute that the connection was aborted. It then reconnects. Everything works again for 1-2 minutes. Then the process repeats. Probably Forever. My coworkers do not experience such problems when connecting to the workplace. My workplace computer: Windows 7 32bit My home computer: Windows 7 64bit connected to the internet via WLAN-router with integrated ADSL modem (Linksys WAG200G) Things I already tried to fix the problem: disabled the Windows firewall disabled the other firewall reduced the MTU upgraded the firmware on the router configured port-forwarding to forward all packets to my home computer The problem remains unchanged. What could be the cause of the connection aborts? What else can I try to fix the connection? Thanks in advance.

  Read the article

• Need assistance setting up Linux Router with 2 public lans

  - by user195407

  I was assigned a.b.c.10/30 (Public IP) for my router and given a.b.c.9 as the gateway. I was also assigned x.y.z.128/25 (Public IP block) for my use. I want to setup a Linux router to handle this situation. My Linux box has 3 NICs, eth0 is a.b.c.10, eth1 I have assigned x.y.z.254, eth2 is unused at present. I have eth1 connected to a network switch, and several devices connected. Let's say box A is x.y.z.129 with a gateway of x.y.z.254. I have not connected to the network yet, as it is not live. What settings do I need to make, beyond adding the 2 network definitions to the cards and having "route add default gw a.b.c.9 eth0"? I may add a private 192.168.100.0/24 lan to eth2 later.

  Read the article

• Why does a group policy not applied to the domain administrator account?

  - by Saariko

  I have a working policy on my entire domain. I just found out, when logging with the domain administrator, that this policy is not applied (EDIT: Running : gpresult shows that the GPO's are applied - but, this GPO is for Drive Mappings, and the actual drive mappings are NOT shown) The administrator account - does not have any login script on his profile tab. My GPO's are mainly small/atomic settings: single GPO to handle each settings: UAC, Firewall, printers. GPO status for the object is enabled That's an overview of the Drive Maps: Reading on MS support site, I checked the delegation tab, and it is marked as applied to domain and enterprise admins. Every user gets these policies correctly. The OU that is set is the root of the domain. (for testing purpose - I did that to eliminate hierarchy issues - did not help) Block Inheritance is disabled. (never used it anyway) GPO link GPO Security Filterings

  Read the article

• match and export subject line and from header with procmail

  - by Nick

  I would like to use procmail or a combination of procmail and formail to take an email message and match a specific keyword in the Subject: line/header, and if matched, export the contents of the Subject: line/header, and the contents of the From: line/header to a perl script. I have researched this, and have not been able to get this working all the way. I am new to procmail, and I assume I need to use a nesting block, but I am not sure how to get the data and then export it. I have been able to match the subject line and export it to a perl script where it is read via ARGV0, but get lost when trying to export and match multiple fields. I tried subscribing to the procmail listserv, but it appears to be broken. Can someone help me with this, please?

  Read the article

• Freebsd or Linux? as BGP router over 100mbps

  - by Yucong Sun

  I am building a server to act as a BGP border router for my 100mbps uplink in ISP. I needs these feature: 1) Dual stack BGP peering/routing (at least 100Mbps, maybe more). 2) Potential full internet BGP feed. 3) Some basic ACL functionality. The hardware is L3426/8G ram. NIC will be on-board dual port Broadcom 5716. I've worked with Linux extensively before and it seems to be able to handle 100mbps, but I heard FreeBSD is faster on networking stuff. Which one should I use? And do we have some performance benchmark numbers out there? Cheers.

  Read the article

• Spamassassin: How to delete all spam messages on the server?

  - by Beck

  Can't find out, how to configure spamassassin to delete all spam messages. Currenly it's only mark messages as spam, but pass them throught IMAP to client. How to block them from passing through to IMAP clients? http://spamassassin.apache.org/full/3.3.x/doc/Mail_SpamAssassin_Conf.html And it's blocking some of our notification messages... -1.4 ALL_TRUSTED Passed through trusted hosts only via SMTP 0.0 HTML_MESSAGE BODY: HTML included in message 2.4 HTML_IMAGE_ONLY_08 BODY: HTML: images with 400-800 bytes of words 2.9 TVD_SPACE_RATIO BODY: TVD_SPACE_RATIO 1.7 MIME_HTML_ONLY BODY: Message only has text/html MIME parts 1.1 HTML_MIME_NO_HTML_TAG HTML-only message, but there is no HTML tag 1.1 HTML_SHORT_LINK_IMG_1 HTML is very short with a linked image -1.4 AWL AWL: From: address is in the auto white-list This is what clients getting on their mails in place of our notification messages. Any idea how to pass those messages through and how to delete incoming spam? Thanks ;) I have this setup: postfix spamassassin clamav-daemon amavis

  Read the article

• How do I mount a HFS+ dd image in OSX?

  - by Paul McMillan

  I had an HFS+ formatted drive that was going bad and wouldn't mount at all on OSX. I created an image using ddrescue on linux, and was able to save most of it. I can mount the drive and see the data just fine in linux using this: mount -o loop -t hfsplus dd_image /Volumes/mountpoint This doesn't work on my OSX system since hfsplus isn't a valid filesystem type. If I try: mount -t hfs image mountpoint It complains that it needs a block device. What's the fix here?

  Read the article

• How can I monitor network traffic in an all Mac home network?

  - by raiglstorfer

  I have an all Mac network consisting of an Airport Extreme, 1 MacPro, 1 Mac Mini, 2 MackBook Pros, 2 iPads, and 2 iPhones. The Mac Pro is connected directly to the Airport Extreme via Cat5 and the rest is all running via Wireless. Lately I've been getting prompted by Google to enter Capchas frequently. The message states that I might have software running on my network I'm not aware of. My wireless router is password protected using WPA2 Personal and I frequently change my password so I don't think someone is using the network from outside (but I've no way to confirm this). I'm looking for a relatively cheap (preferably open source) solution that would enable me to monitor and profile the network usage by machine and port. Can someone recommend a solution?

  Read the article

• Security question pertaining web application deployment

  - by orokusaki

  I am about to deploy a web application (in a couple months) with the following set-up (perhaps anyways): Ubuntu Lucid Lynx with: IP Tables firewall (white-list style with only 3 ports open) Custom SSH port (like 31847 or something) No "root" SSH access Long, random username (not just "admin" or something) with a long password (65 chars) PostgreSQL which only listens to localhost 256 bit SSL Cert Reverse proxy from NGINX to my application server (UWSGI) Assume that my colo is secure (Physical access isn't my concern for the time being) Application-level security (SQL injection, XSS, Directory Traversal, CSRF, etc) Perhaps IP masquerading (but I don't really understand this yet) Does this sound like a secure setup? I hear about people's web apps getting hacked all the time, and part of me thinks, "maybe they're just neglecting something", but the other part of me thinks, "maybe there's nothing you can do to protect your server, and those things are just measures to make it a little harder for script kiddies to get in". If I told you all of this, gave you my IP address, and told you what ports were available, would it be possible for you to get in (assuming you have a penetration testing tool), or is this really protected well.

  Read the article

• Problem with VPN using 2 Wire Router with a Linksys Router.

  - by Hiram Hubbard

  I am having a problem with a VPN between a 2 Wire router and a Linksys router. 2 wire is the client PC using Linksys Quick VPN software and Linksys RVS4000 is the server. The PC is not the issue. It works on a different network not using 2 wire. Also the Linksys RVS4000 is not the issue, 3 other user can VPN to it with no problem not using 2 Wire. The problem is with 2 Wire. The client PC is getting this error: "The remote gateway is not responding" What configuration changes are needed on the 2 Wire router (port, UPNP, etc...) and what changes are needed if any on the Linksys RVS4000? Thanks.

  Read the article

• Varnish does not recognize req.hash

  - by Yogesh

  I have Varnish 3.0.2 on Redhat and service varnish start fails after I added vcl_hash section. I did varnishd and then loaded the vcl using vcl.load vcl.load default default.vcl Message from VCC-compiler: Unknown variable 'req.hash' At: ('input' Line 24 Pos 9) set req.hash += req.url; --------########------------ Running VCC-compiler failed, exit 1 cat default.vcl backend default { .host = "127.0.0.1"; .port = "8080"; } sub vcl_recv { if( req.url ~ "\.(css|js|jpg|jpeg|png|swf|ico|gif|jsp)$" ) { unset req.http.cookie; } } sub vcl_hash { set req.hash += req.url; set req.hash += req.http.host; if( req.httpCookie == "JSESSIONID" ) { set req.http.X-Varnish-Hashed-On = regsub( req.http.Cookie, "^.*?JSESSIONID=([a-zA-z0-9]{32}\.[a-zA-Z0-9]+)([\s$\n])*.*?$", "\1" ); set req.hash += req.http.X-Varnish-Hashed-On; } return(hash); } What could be wrong?

  Read the article

• AIX network parameters to close TCP sockets of unplugged devices

  - by ADD Geek

  Hi there We have an AIX box, running what we call in banking "ATM Switch" not the ATM networking switch, but the bank ATM driver. where we have some ATM machines connected to two server processes. The problem is, when we disconnect any of these machines, the netstat -na| grep <port number> command shows that the socket established for this disconnected device is still established, we have to manually send a command from the software to make the socket aware that it is not live anymore. Is there a parameter on tcp level to make this connection aware within a minute or two that this device is not connected anymore? we had the following parameters set with root privileges: no -o tcp_keepidle=1000 no -o tcp_keepcnt=2 no -o tcp_keepintvl=150 no -o tcp_finwait2=100 it was originally having the default values. but even after we changed these parameters and restarted the server processes, the problem was still there.

  Read the article

• Apache 2.2.16 + PHP 5.2.14 sometimes causes Apache to not stop properly

  - by ZiggyTheHamster

  Sometimes, Apache decides not to shut down nicely. killall apache2 or kill -9 (apache2 PID here) shuts it down so that it can actually start back up without the port being in use. Other posts seem to indicate that PHP 5.2 might have issues hanging up Apache. I'm using the worker MPM on an x86_64 Gentoo Linux system if that helps. Any other things I should consider hanging up Apache besides PHP? Should I be stopping Apache with /etc/init.d/apache2 gracefulstop instead of /etc/init.d/apache2 stop?

  Read the article

• Can I set up OpenVPN on two or more machines so that they can each act as client and server?

  - by ianfuture

  The question summarises what I want to achieve. In more detail: I have a Windows XP Pro PC at a work location that I want to be able to access my home Windows XP Pro PC and other home computers from. But I also want to be able to connect to the work PC from home. I think the term generally used is a "mesh" network. Can I do this with OpenVPN ? If so how would I do it? What are the most important things to remember to do? EDIT: The work Windows XP Pro PC is largely managed by IT Dept, I do have local admin rights to install things. Some settings are disabled. My main concern was firewalls and port forwarding on the work PC. Any suggestions?

  Read the article

• SMTP error 503 when sending mail with Windows Mail & Mobile Me:

  - by Marty Pitt

  I've started getting an error on my windows machine when sending an email through Windows Mail, using Mobile Me: An unknown error has occurred. Subject 'Test' Server Error: 503 Server Response: 503 5.7.0 TLS already in use. Server: 'smtp.me.com' Windows Live Mail Error ID: 0x800CCC65 Protocol: SMTP Port: 587 Secure(SSL): Yes I've checked and double-checked my credentials, and outbound mail settings, and they're correct. I've deleted and re-added the account, and I get the same issue. I'm able to receive email fine. Note - this issue only affects one PC - my laptop has no issues. Any suggestions on what Error 503 means, or how I would fix this?

  Read the article

• Windows 7 Internet Sharing - How to have simultaneous Internet Access to my client

  - by Marl

  The condition: I'm running on windows 7, I'm using a usb broad band for my computer, then my computer is connected to the router tp-link tl-wr340g (in this sense my computer is the internet source since my router has no usb port for this type of broad band). I set the broad band to have internet sharing. I got 3-4 client connected through the router. The problem is whenever a client is using the internet, other clients including me don't have internet connection, additionally, If I have the internet access other clients don't have internet access. In my setup in windows XP (bridging the broad band and the router network) it works perfectly fine, every one has simultaneous internet. To clarify, how can I have all clients including me have internet connection simultaneously in my windows 7 OS? //Additionally, the create "network bridge" setup is missing, from this link the "Bridge Connection is missing", how can I fix that?

  Read the article

• Getting my IP off the hotmail blacklist

  - by Kai

  I got a new server with a new IP address. Apparently this IP is listed in the hotmail blacklists so that I can't send mails to hotmail users out of my webapplication. postfix/smtp[24706]: 8F31C9404B: to=<[email protected]>, relay=mx3.hotmail.com[65.55.37.88]:25, delay=0.66, delays=0.01/0/0.48/0.16, dsn=5.0.0, status=bounced (host mx3.hotmail.com[65.55.37.88] said: 550 SC-001 Unfortunately, messages from 78.47.228.xxx weren't sent. Please contact your Internet service provider since part of their network is on our block list. You can also refer your provider to http://mail.live.com/mail/troubleshooting.aspx#errors. (in reply to MAIL FROM command)) My hoster will not help me get that address removed from the blacklist. So I tried to find a way to do it on my own, but I can't find a way to ask Microsoft to remove my IP from that list. Has anyone managed to remove a falsely listed address? And if yes: how?

  Read the article

• What could cause my LAN Pings be greater than 100ms?

  - by James Holland

  I have 2 servers (Both: Windows Server 2008, Dual Xeon 2.8Ghz, 32GB RAM, 8 x 15k SAS Drives). One of them is a DC / Web server / Exchange Server, the other is a SQL Server (2008). I have a 48 port Netgear GS748T Gigabit switch. When I ping from server to server, I get ping times <1ms, great, but when I ping from a PC, I get varying pings from the occasional <1ms to 500ms!! If I log into either server and look at Task Manager, CPU usage peaks at 20%, memory usage is 100%, but I am led to believe this is normal as Exchange will just use as much as you have, and release it when requested. Network usage peaks at 1%. I really don't understand how the ping can vary that much. I know I am giving very little info, but this is all I know, I apologise, but can anyone help? In response to question, I have pinged by both IP address and hostname, no difference in ping times.

  Read the article

• Can't run node.js script on server reboot

  - by webstyle

  I need to listen events on port 3240 and I'm using node.js for that purpose. I need to execute my script with forever tool. I also need to run forever on server reboot. When I run forever glh.js everything works: forever list says there is a running process. But when I'm trying to run forever on server reboot I can't get it working. I've created a file in /etc/init.d with the following content: #!/bin/bash /var/www/yan/data/gitlabhook/runglh.sh &>/var/www/yan/data/gitlabhook/runglh.log When I reboot the server, the output log is the following (the same as when I run it manually via console): info: Forever processing file: glh.js But in this case forever doesn't start a process. forever list outputs: info: No forever processes running

  Read the article

• Is there a free-embedded SSH solution ?

  - by ereOn

  Hi, I'm working for an important company which has some severe network policies. I'd like to connect from my work, to my home linux server (mainly because it allows me to monitor my home-automated installation, but that's off-topic) but of course, any ssh connection (tcp port 22) to an external site is blocked. While I understand why this is done (to avoid ssh tunnels I guess), I really need to have some access to my box. (Well, "need" might be exagerated, but that would be nice ;) Do you know any web-based solution that I could install on my home linux server that would give me some pseudo-terminal (served using https) embedded in a web page ? I'm not necessarily looking for something graphical: a simple web-embedded ssh console would do the trick. Or do you guys see any other solution that wouldn't compromise network security ? Thank you very much for your solutions/advices.

  Read the article

• Is to possible to achieve the SATA II's 3Gbps (375MBps) between home network storage and home computers?

  - by techaddict

  Gigabit ethernet only has 1Gbps (125MBps), whereas SATA II has up to three times that rate. Is it possible to achieve the rate of three times Gigabit ethernet connection which is SATA II speeds, between home network storage and the laptops and desktops with SATA II hard drives? If so, how? Or, is the limitation of a gigabit ethernet port on the laptops the limitng factor, making 1000Gbps the fastest practical transfer speed possible? (practical, meaning that without taking apart the laptop and doing physical modifications like branching a SATA II transfer cable, etc.) -- I just realized -- wouldn't a USB 3.0 cable do the trick? Since USB 3.0 can reach up to 675MBps?

  Read the article

• SATA Backward compatibility? [closed]

  - by Fladur

  Possible Duplicate: Can I connect a SATA-II hard drive to a SATA-I connection? Hello everyone One of my system is really old, but I still use it, right now, the HDD is and old IDE drive that is starting to fail (I got to many damaged sectors) and I'm planing to replace it. The motherboard supports Serial ATA 1 and I have a real nice offer on a SATA 2 drive, can I use that drive on a SATA 1 interface (obviously with reduced speed) just like a USB 2.0 device on a 1.0 port? Thanks in advance.

  Read the article

• Merging multiple versions of same excel spreadsheet

  - by GrinReaper

  So here's the situation: I have multiple versions of the same spreadsheet-- each one has the exact same row and column labels. The difference between any two given spreadsheets is that data in one spreadsheet shouldn't be in the other (but sometimes it might.) Is there anyway to merge all of them into a "master copy" (or just a blank version) of the spreadsheet? (basically, using the data from various versions of that worksheet to fill out the main one) Copy-pasting is extremely tedious, and doesn't allow me to copy blocks of rows IF the row numbering is non-contiguous. (For example, Rows 1, 2, 3, 6 are in a block, but row 4 and 5 just don't exist.) Ideas? Googling hasn't turned up anything that seemed directly relevant to this problem.

  Read the article

• Tomcat: how to change location of manager and host-manager to a subdirectory

  - by rolandpish

  Hi there. I'm running a Tomcat 6.0.28 at port 8080 in a Debian Squeeze box. I'm a newbie in tomcat. I would like to change the location of manager and host-manager applications. That is, instead of going to: http://myserver:8080/manager/html I would like that to be: http://myserver:8080/somesubdirectory/manager/html Is this possible? If yes, how can I achieve this? I would really appreciate any help in this. I've been trying to change the context of /etc/tomcat6/Catalina/localhost/manager.xml from /manager to /somesubdirectory/manager with no success. Also I tried to create a symlink under /var/lib/tomcat6/webapps/ROOT/somesubdirectory/manager with no success. Thanks in advance. Cheers.

  Read the article

< Previous Page | 379 380 381 382 383 384 385 386 387 388 389 390  | Next Page >