Search Results

Search found 10402 results on 417 pages for 'macbook pro'.

Page 385/417 | < Previous Page | 381 382 383 384 385 386 387 388 389 390 391 392  | Next Page >

• Turning on Bluetooth disables wifi on Yoga 2

  - by Yostage

  I have a Lenovo Yoga 2. The moment that I turn on bluetooth, the wifi drops out - I lose connection, and connecting again shows "connection failed". If I turn the bluetooth off, wifi can reestablish fine. I've tried lots of different combinations of drivers for both the wifi and the bluetooth, but no combination has has changed this behavior yet. I've read some speculation that the cards have insufficient shielding, but that seems like kind of a large flaw to ship with. I've tried with a Carbon X1, a Yoga 2 Pro, and a Yoga 2 all next to each other on the desk while running InSSIDer. The X1 and the Y2P don't lose wifi connection when the bluetooth turns on, but the Y2 does immediately. The Y2P and the Y2 are running the same drivers for bluetooth and wifi, and appear to have the same wireless card internally. During the failure state, InSSIDer still sees signal strength for my network, but I cannot connect to it. stats: the card that comes in the laptop is an Intel Wireless-N 7260 Intel Bluetooth driver is at 17.0.1401.422 Intel Wireless driver is at 17.0.2.5 Windows 8.1 x64 Home wifi is a Medialink MWN-WAPR150N

  Read the article

• Understanding how IE's SmartScreen works

  - by Kevin Donn

  Today I downloaded an update to our mail server on my dev machine using IE9 on Win7 Pro. I directed IE to save the file on our server's shared drive so I could install it later. When the download finished, IE showed a red banner at the bottom and said that, ".exe is not commonly downloaded and could harm your computer." There were three buttons, "Delete", "Actions", and "View downloads". I selected "Actions" just because I had never seen this before. It showed a "SmartScreen Filter" dialog basically giving three choices: "Don't run this program (recommended)", "Delete program", and "Run anyway". I just canceled the dialog because I didn't want to run it in the first place; I just wanted to download it so I could run it later on the server. So when I did try to run it, it would blow up immediately saying, "Setup was unable to create the directory - Error 5: Access is denied." I tried unblocking the file, "Run as Administrator" even though I already was Administrator, turning off UAC, etc. Cutting to the chase, I finally downloaded the file again, ran WinMerge on the two and it showed they were identical, except the new one ran fine. I went back to my dev machine, downloaded the file through Firefox and then ran it on the server, again fine. But when I tried again through IE, again SmartScreen showed its red banner and somehow clobbered the file even though it was stored on another machine, and WinMerge can't tell the difference between it and a good file. I've looked around on the web for how SmartScreen works, but they all give user-level descriptions of it. What I want to know is, what does it do to that file to make it unrunnable on another machine? Thanks

  Read the article

• Looking for "bitmap-vector" image editor

  - by Borek

  I used to use PhotoImpact which is no longer developed so I'm looking for a replacement. What made PhotoImpact great to me was the ability to work in both bitmap and vector modes. What I mean by that: I could have an image or screenshot and easily add arrows, text captions or shapes to it. These shapes were vector objects so I could come back to them later and amend their properties easily. Software I know of: Paint.NET is purely bitmap so please don't recommend it - layers are not enough for my needs Drawing tools in MS Office work pretty much the way I'd like - you can paste an image and then add vector objects on top of it. It just doesn't feel right to have the full-fidelity original images stored as .docx or .pptx (I don't fully trust Word/Powerpoint that they don't compress the image) I'm not sure about GIMP but if it's just "better Paint.NET" (i.e., layers but no vector objects) I'm not interested Photoshop is out of question purely because of its price tag Corel killed PhotoImpact because they already had a competing product (Paint Shop Pro) but AFAIK it lacks vector features. Any tips for PhotoImpact alternatives would be very welcome.

  Read the article

• Radeon 6950 - Garbling of text and graphics in certain Windows only

  - by Greg

  This morning I noticed the text in Gmail (in Firefox 4) looked a little funny (kind of thin, maybe some color fringing). I went to work and thought it might be some ClearType issue or something with the way Direct way that FF4 draws to the screen. When I came back from work (I left the computer on), the problem was much worse - way beyond ClearType nit-picking. The text was barely readable. I opened Chrome and there was no such problem. It seems like only Windows that use hardware acceleration are garbled, and ones that use GDI are not. But, I fired up Dragon Age and didn't notice any problems (I only really looked at the main menu though). Here is a link to a screen shot that illustrates the problem. Notice how the Windows Live Mesh window is completely unreadable, the text in Firefox 4 (left) is pretty bad, while Chrome, the Windows Control Panel, and the task bar are perfectly fine. The fact that the problem shows up in screen shots and that it only happens in certain Windows makes me confident that the problem cannot be with the monitor or DVI cable. I am using the AMD Radeon drivers from 4/27/11. The card I have (MSI Frozr II) came with a slight overclock (810Mhz) out of the box, but it looks like when I'm on the Windows desktop it's not running at full clock (CCC reports 450Mhz). Still, I underclocked it to the stock reference clock (800Mhz) and it made no difference. The idle temperature according to Afterburner is 42-44 Celsius, which seems a tad high but not enough to cause a problem - it's cold to the touch if I open up the machine. What the heck could be causing this? The problem varies in intensity. As we speak I'm in Firefox and things look better than they did earlier - it'll probably get worse again soon. Radeon 6950 (MSI Frozr II), Seasonic X 560, Core i5 2500K at stock clockspeeds, 16GB RAM, Asus P8P67 M Pro

  Read the article

• Windows 7 hangs after going into sleep a second time

  - by Brian Stephenson

  I've searched everywhere around Google and can't figure out why this is happening so I decide to ask here to see if anyone has a problem like this. Like it says in the title, whenever I sleep ONCE I'm able to wake the system, but going back to sleep again AFTER waking up for the first time results in it hanging on no input and no output, with the fan spinning as fast as possible and alot of heat being spewed out by the fan as well. I've tried various things like setting all USB Hub Root's to not get switched off for power saving, disabling USB selective suspend, disabling PCI-e link state power management, and even unplugging ALL USB devices and it wont wake up after the second attempt. And I've even waited up to a full hour of the CPU fan spinning loudly and it's still stuck trying to wake up. The only USB devices I use are a Microsoft USB Comfort Curve Keyboard 2000 (IntelliType Pro) and a generic HID compliant mouse from Creative model number OMC90S "CREATIVE MOUSE OPTICAL LITE". My other devices like external drives and controllers are unplugged when I'm not using them as having too many USB devices plugged in at a time causes a deadlock on almost all of the ports I have. Here's my system specifications (Most of these are from CPU-Z): Brand: Gateway DX4300-19 Mainboard: Gateway RS780 Chipset: AMD 780G Rev 00 Southbridge: AMD SB700 Rev 00 LPCIO: ITE IT8718 BIOS: American Megatrends Inc. ver P01-A4 09/15/2009 CPU: AMD Phenom II X4 810 at 2.60 GHz RAM: 8.0 GB DDR2 Dual Channel Ganged Mode at 400 MHz GPU: ATI Radeon HD3200 Graphics Intergrated - RS780 OS: Windows 7 Home Premium x64 OEM (Acer Group) HDD: WDC WD10EADS-22M2B0 1.0 TB (Western Digital Green Caviar) My BIOS has absolutely no control over how I setup the sleep mode to be either S1 or S3. So I can't check these settings or even change them. Hybrid sleep is also disabled, I can successfully go into hibernation and wake from hibernation but this is painfully slow due to a harddrive problem I'm having with this "Green Drive". (Hibernation takes over ~3 minutes to complete) Any help would be appreciated, thanks.

  Read the article

• Remote Desktop Zooming

  - by codeulike

  Using Remote Desktop from a device with a hi-res screen (say, a Surface Pro) is decidedly tricky - as everything displays 1:1 scale and so looks tiny. If the machine you are remoting into runs Server 2008 R2 or later, you can change the dpi zooming setting (see here). But for older hosts, that doesn't work. Using normal Remote Desktop, you can connect with a lower resolution, say 1280x768, and turn on smart-sizing. However smart-sizing can scale down (to display a huge desktop in a small area) but does not seem to scale up (to display a small desktop in a big area). Using the Windows 8 Remote Desktop App, you can zoom - but you cannot set the default resolution of the host. What I want is a lower resolution in the host, scaled up to fit my screen. So both of those are close to what I want, but dont quite work. So question is: Does the Remote Desktop App allow screen resolution to be set somehow? Is there some other Remote Desktop client that can handle zooming better?

  Read the article

• (manually configured) kernel update leaves wireless in a mess

  - by Mala

  I recently upgraded my kernel from 2.6.31-gentoo-r6 to 2.6.32-gentoo-r7. In both cases, I configured everything manually. However, since the upgrade, my wireless card appears to be on the fritz. It will connect to networks just fine, and remain connected, but can only access the internet (and other hosts on the network) for about 3 seconds after connecting. Reconnecting to the network appears to fix the problem... for another 3 seconds or so. The problem is "solved" by booting into the older kernel. The relevant lspci entry is 02:00.0 Network controller: Intel Corporation PRO/Wireless 5300 AGN [Shiloh] Network Connection I'm pretty sure I have the correct drivers enabled in the kernel Device Drivers ---> Network device support ---> Wireless LAN (IEEE 802.11) ---> <*> Intel Wireless Wifi [*] Enable LED support in iwlagn and iwl3945 drivers [*] Enable Spectrum Measurement in iwlagn driver [*] Enable full debugging output in iwlagn and iwl3945 drivers <*> Intel Wireless WiFi Next Gen AGN (iwlagn) [*] Intel Wireless WiFi 4965AGN [*] Intel Wireless WiFi 5000AGN; Intel WiFi Link 1000, 6000, and 6050 Series I tried with the other intel drivers enabled as well (iwl3945) and no difference. Is there something stupid I'm missing? Is there something I have to recompile after upgrading the kernel (a la nvidia)? Thanks Mala

  Read the article

• Wireless does not work on Ubuntu 9.04

  - by Yongwei Xing

  Hi all I install the Ubuntu 9.04 my old Lenovo Y520 laptop, the wirless does not work.My Wireless card is Intel Pro/wireless 2100 card. But I can not enable it. My wired card is working well. Does anyone meet it before. the ifconfig output is eth0 Link encap:Ethernet HWaddr 00:0a:e4:5f:6c:30 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:973 errors:0 dropped:0 overruns:0 frame:0 TX packets:1025 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:574701 (574.7 KB) TX bytes:169249 (169.2 KB) Interrupt:10 eth1 Link encap:Ethernet HWaddr 00:0c:f1:58:79:b5 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:10 Base address:0x8000 Memory:d0202000-d0202fff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B) the output of iwconfig is eth1 unassociated ESSID:off/any Nickname:"ipw2100" Mode:Managed Channel=0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:off Retry short limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I have another question. When my OS is 9.04, there is a icon about network connection on the panel at the top. After I upgraded to 9.10, that icon disappeared. How can I get that back? Best Regareds,

  Read the article

• Move a screen session back to its original PID

  - by cron410

  Installed McMyAdmin (minecraft manager) on Ubuntu 12.04 32 bit. Wrote my own service to start McMyAdmin (.net app running in Mono) in its own screen session, and be able to inject proper McMyAdmin commands into that session with the init.d script. Its been running great! Today, I decided to start installing a Source dedicated server (counterstrike pro mod) I determine its going to be a long download process so I quit the process and fire up a fresh screen session called "source". I paste the command in, but it has a space at the begining and bash complains of ignoring semaphores or some such. I detach and reattach the session. Its sliding like butter. I ctrl+a-d out of the session and start exploring the new folder structure and figure out where I need to place a symbolic link. I go to resume that screen and this is what I see: $screen -r source There are several suitable screens on 20091.source (12/02/12 22:59:53) (Detached) 19972.source (12/02/12 22:57:31) (Detached) 917.minecraft (11/30/12 15:30:37) (Attached) It appears I am connected to the minecraft screen?!?!?! So I attach to the other screens one at a time. minecraft is running in 19972.source and sourceds is running in 20091.source So how the hell did I move the minecraft process to another session called source and my main terminal is now "attached" to the minecraft screen? more: I just used exit to quit the putty session, then logged back in, its still the same. did that 3 more times and now the minecraft screen is gone and everything is acting as it should except, of course, for the session name and start time of the "new" minecraft screen. Should I just submit this as a bug for GNU screen?

  Read the article

• Boot sequence unlike reboot

  - by samgoody

  When I turn on the computer it acts very differently than when I reboot it. [WinXP Pro, Intel Core2 6600, 2.4GHZ, 2GB RAM, NVIDA GeForce] Boot: Monitor must be plugged into the motherboard or no image. Screen resolution 800x600. Changes to the resolution cause only the top half of the screen to be usable, and are lost when I shut down the computer. Desktop icons arranged in neat rows on left of desktop. Nothing of note in system tray In Device Manger - Display adapter: Intel(R) Q965/Q963 Express Chipset Family In Device Manger - Monitors, two monitors are listed Hibernate and standby work. Reboot: Monitor must be plugged into the graphics card or no image. Screen resolution - 1280x1024 Desktop icons arranged in the cute circle that I put them in. NVIDIA icon shows in system tray. In Device Manger - Display adapter: NVIDA GeForce 6200LE In Device Manger - Monitors, one monitor is listed Hibernate and standby do not work. When awakened after a hibernation it says: The system could not be restarted from its previous location because the restoration image is corrupt. Delete restoration data & proceed to system boot? Double reboot (inconsistent): Monitor must be plugged into the graphics card. Screen resolution - 1024x768 Odd icon shows in system tray whose tooltip says "Intel Graphics" For a while my morning ritual was to boot, wait, reboot using (alt+ctrl+del - ctrl+u - R), wait. Keeping the monitor plugged into the graphics card. But aside for the inefficiency of this method, I sometimes want to standby and can't. On the other hand, the computer is unusable when set to 800x600. Please help, anyone?

  Read the article

• Word 2003 will not show up in Windows 7

  - by invadersil

  I just installed Windows 7 over the holiday and it went swimmingly well. Today I finished up a few things like installed MS Office 2003. That went well too, until I tried to open up Word. When I try to open up Word on its own, it comes up in the application bar but the application window does not show. I use Word as the editor in Outlook which does work. I also discovered that I can start it up in safe mode and it will work normally. But normal startup just doesn't show me anything. Oddly, if I start typing stuff while the app is selected in the app bar and then try to close it, it pops up a message asking if I want to save it. I tried running the compatibility utility within Windows 7 but still no dice. Has anybody seen this issue yet? The other Office apps start normally. Edit: More info: Windows 7 Pro 64-bit. Office is patched up to SP3. And last time I checked, there were no updates either (and fully updated with KBs after SP3) And I did a fresh install of Windows 7.

  Read the article

• Memory modules not running at rated speeds.

  - by Wesley

  Hi all, I'm having some odd memory issues with my build. Here are my specs right now: QDI Superb 4 motherboard Intel Pentium 4 Northwood 2.4GHz (512KB L2, 533MHz FSB) 3x 256MB PC2100 DDR266 RAM 16MB NVIDIA TNT2 Pro AGP Seagate 80GB IDE HDD Generic USB 2.0 PCI Generic Modem PCI Bestec 250W PSU To be even more specific, here are the current brands and models of each module: Kingston KVR266X64C25/256 Samsung PC2100U-25331-Z SMART SM5643285D4N0CHM0H Supposedly, they are all PC2100 266MHz modules with a latency of 2.5. Looking in Speccy, the Kingston module is somehow running at a speed of PC2300 ~284MHz. I've never overclocked RAM at all as I don't know how to. However, when I first started the computer, I had the SMART module in place first and then reset the BIOS settings, including the integrated overclocking options. However, this still doesn't explain why the Kingston module runs at a higher speed than the SMART and Samsung module. Why is it like this? On a side note, where could I find the motherboard manual for the QDI Superb 4? Thanks in advance.

  Read the article

• Outlook 2010 on WinXP runs once then refuses to run again until reboot

  - by msorens

  Since I installed Outlook 2010 on a new machine (WinXP Pro SP3) a couple months back I have had an issue that is quite annoying: If I close Outlook then attempt to restart it I get a small pop-up saying only: "Cannot start Microsoft Outlook". I found one workaround, but not a terribly practical one: reboot. If I reboot then launch Outlook, it opens fine. Here is what I know: Since I can run Outlook just fine after a reboot, I do not see that a system restore, an OS reinstall, or the like would help. I tried "outlook.exe /resetnavpane" and "outlook.exe /safe" but those give the same error. There are no entries in the event log. There is no instance of Outlook appearing in the process list once I close the program, so it does not seem to be an alias for "outlook is already running". As far as I have found, my situation is unique among reports of similar incidents: I have uncovered no other reports saying Outlook would run fine the first launch or that a reboot would again allow it to run. Suggestions?

  Read the article

• Window 7 Computer name changing on its own?

  - by DC

  Very odd problem... I have a Dell Latitude D830 with XP Pro that has been running on my local domain for many years. I recently Installed Windows 7 Enterprise on the D830 using a brand new HDD so that I could still use XP if I needed by just swapping out the HDD's. I added the W7 installed system to my domain using a completely different machine name than that used for the XP system and everything seemed to be functioning as it should. On boot up over the last 2 weeks or so I occasionally (3 times now) get to the login screen and try to login to the domain only to get an error saying that the Computer name is not a trusted machine in the domain I'm trying to log in to. Come to find out that the machine name on the W7 system has been changed somehow to that of my old XP system. If on the W7 system I then change the name back to the correct name, disjoin the domain, reboot, add the machine back into the domain … all is well for an unknown period of time until this happens again. This last time, I know for a fact that everything was fine the day before when I shut down the system. I came in today, powered up the system and the machine name had been changed to that of my old XP system again. Has anybody else seen this behavior or hav any ideas on what could be causing it? Thanks!

  Read the article

• PowerPoint 2007 slides are only partially converted to PDF since SP3

  - by Tim Pietzcker

  EDIT: Microsoft support has confirmed that it's a bug with PowerPoint 2007 SP3. I have recently encountered a problem with the "Save as PDF/XPS" add-in for PowerPoint 2007. When I use "Save as PDF/XPS" to create a PDF version of my presentation, some slides are only partially included in the resulting PDF file. For example, this: (download the PPTX file here) is reduced to this (in Adobe Reader X or Acrobat Pro X (both 10.1.1)): (download the PDF file here) So far, I have only encountered this with slides that contain animation elements, but which part of the elements remain in the PDF version appears not to have anything to do with the order in which the animated elements appear, so that might just be a coincidence. Update: The problem persists even if I "un-animate" the slides (removing the animation but leaving the previously animated elements intact). When viewing the affected slides in Acrobat Reader, it sometimes complains about the file containing invalid elements, and that I should complain to whoever generated the PDF file... Update 2: I have just installed Office 2007 on a new Windows 7 x64 PC. With the original Office version (12.0.4518.1014 MSO 12.0.6562.5003), a correct PDF file is generated. After installation of SP3 (12.0.6606.1000 SP3 MSO 12.0.6607.1000) a corrupt PDF file is generated. Today's Microsoft Updates (to PowerPoint version 12.0.6654.5000) haven't changed anything, by the way. Update 3: I have opened a tech support incident with Microsoft. They have confirmed the "limitation", as they called it, and it is indeed limited to 2007 SP 3 only. They are going to pass it on to the developers but they can't say when or even if a fix would be forthcoming, so I guess I'll upgrade to 2010...

  Read the article

• USB transfer speed for Windows 7 is incredibly slow to my external drive

  - by Wolfram

  I'm running Windows 7 Pro and am try to backup 116 GB of data to my external 1 TB hard drive. My laptop has only USB 2.0 ports and my hard drive is USB 3.0 compatible, as is the cable I'm using. I understand that the transfer speed should still be in accordance with USB 2.0 speeds. However, right now I'm getting 135 KB/s and it's been gradually dropping. For an earlier transfer, I would get between 4 MB/s to 8 MB/s. So, I'm really just wondering what's going on with my transfer rate and what I can do to improve it. I'm currently about 35 GB into the 116 GB transfer. Another strange thing is that the window which shows the transfer status decided to max out at 835 MB, and therefore shows items remaining as 0. However, it is still performing the rest of the transfer, and I can see it still cycling through files. Now that I think about it, it seems plausible that the speed being shown by the window is calculated merely as total data transferred / time elapsed. Since the "counter" of data, as far as what is being displayed in the window, maxed out at 835 MB, as time increases, the speed shown is going to keep decreasing because the 'total data transferred' value isn't being incremented. So with that in mind, I suppose I don't actually know at what rate the data is being transferred currently. Nonetheless, my best speed earlier was only around 8 MB/s. Shouldn't USB 2.0 deliver closer to 35 MB/s? Also, if someone can tell me why the transfer status window is displaying the incorrect data information and how to fix this, that would also be appreciated.

  Read the article

• CUPS printer on Vritual Machine can be access via CUPS admin, but not by XP?

  - by SJaguar13

  I have a Zebra label printer connected to a Linux Mint virtual machine. It was set up with CUPS and a Windows XP computer can then print to it via http://192.168.1.76:632/printers/labelprinter. That was all fine and dandy I then hooked up a Fargo Pro L PVC card printer to a Windows XP virtual machine. I had to disconnect the label printer as the server that hosted both virtual machines only has 1 parallel port. Now I plugged in the Zebra again, and it cannot print from the Windows XP computer anymore. If I go to the CUPS admin panel on the Windows XP computer, I can see it, everything looks fine, and I can send it a test page to print which works. If I try to print from Windows, I get an error that the printer is not found/cannot connect to the server. The only other thing that changed was the firewall on the router to allow remote desktop to another computer from outside the network, but all the firewall stuff was for external use. Nothing affected the IP address of the internal network. The Linux Mint VM also had a PDF pritner that was shared with CUPS. That printer is also down. I tried setting up a new CUPS installation on another VM, and when I go to share it with XP, I get the same error. I don't know what to try. It has access, it can get to the admin from that computer, it seems to be up and ready, but when Windows tries to connect, the printer isn't found even though 4 days ago everything was fine. Any ideas?

  Read the article

• How can I make WSUS less invasive for our users?

  - by Cypher

  We have WSUS pushing updates out to our user's workstations, and things are going relatively well with one annoying caveat: there seems to be an issue with a pop-up being displayed in front of some users informing them that their machine will be rebooted in 15 minutes, and they have nothing to say about it: This may be because they did not log out the prior night. Nevertheless, this is a bit too much and is very counter-productive for our users. Here is a bit about our environment: Our users are running Windows XP Pro and are part of an Active Directory Domain. WSUS is being applied via Group Policy. Here is a snapshot of the GPO that is enforcing the WSUS rules: Here is how I want WSUS to work (ideally - I'll take whatever can get me close): I want updates to automatically download and install every night. If a user is not logged in, I would like the machine to reboot. If a user is logged in, I would like their machine not to reboot, but instead wait until the next "installation period" where it can perform any other needed installations and reboot then (provided the a user account is not still logged in). If a user is to be prompted for reboot, it should only happen once per day (if possible), but every time they are prompted, they must have a way to postpone the reboot. I do not want users to be forced to restart their computer whenever the computer thinks it should happen (unless it's after an update installation and there are no logged in users). That doesn't seem productive to force a system restart in the midst of a person's workday. Is there something that I can do with the GPO that would help make WSUS less intrusive? Even if it gave the user an option to Restart Later - that would be better than what is happening now.

  Read the article

• Un-install network printer drivers from Win7 64 Home Premium

  - by AkkA

  I recently bought a NAS device that has print server functionality through USB. The printer was already installed and fully working on another Win XP box, set up that box to see the printer over the network and it prints fine. I tried to install the printer on my Win7 laptop (64 bit, Home Premium), but got the wrong drivers somehow, or it just refuses to work. I need to completely un-install the printer drivers and start from scratch. Removing the printer (by going to the printers folder, right click and remove) does not actually un-install the drivers. It only removes the printer from active use. Even if I try to re-install new drivers it will load the old ones. I have read a few things on the net that say to load up a device snap-in or something of the sort into Computer Management, but this seems to be valid for Win7 Pro or greater, the function everyone tells you to use isnt available in Home Premium. Is there anything I can use to manage device driver files in Home Premium? I want to completely remove them from the computer.

  Read the article

• Connect trough remote computer connection

  - by Didac

  First, sorry for my english and my poor knowlodge of this subject. I have a dedicated server placed in Germany (windows 2008 R2) and I live in spain. I would like to access internet from my home computer (Windows 7 Pro x64), trough my server in Germany, so I can use a German IP, what I need some times. I have complete acces in to both computers, but I just don't know where to start. (My knwoledge is limited to software development :/ ) I'd like to know where to start, if I need to create a VPN and so.. Thanks in advance! Update 1 I tried a lot of options of OpenVPN, but I sadly I know nothing abuot networking, so I have to accept I do not know what I'm doing :( Here are my config files (note most of the options are from the sample config files). server.conf #server config file start port 1194 proto udp dev tun server 10.0.0.0 255.255.255.224 #you may choose any subnet. 10.0.0.x is used for this example. ca "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\ca.crt" cert "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\server.crt" key "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\server.key" dh "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\dh1024.pem" push "redirect-gateway def1" push "dhcp-option DNS 8.8.8.8" #the following commands are optional keepalive 10 120 comp-lzo persist-key persist-tun verb 5 #config file ends client.conf #client config file start client dev tun proto udp remote 176.9.99.180 1194 resolv-retry infinite nobind persist-key persist-tun ca "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\ca.crt" cert "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\client1.crt" key "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\client1.key" ns-cert-type server comp-lzo verb 5 explicit-exit-notify 2 ping 10 ping-restart 60 route-method exe route-delay 2 # end of client config file And here's the server's network settings: IP address: 176.9.99.180 Subnet mask: 255.255.255.224 Default gateway: 176.9.99.161 Preferred DNS server: 127.0.0.1

  Read the article

• AGP 4x slot running at 2x

  - by Wesley

  Hi all, Here are the specs of the machine related to this question: AMD Athlon XP 2400+ @ 2 GHz / 2x 512MB PC3200 DDR RAM / 3D Fuzion 128MB GeForce 6200 AGP / WD 160GB IDE HDD / FIC AM37 (mobo) / Codegen 350W PSU / Windows XP Pro SP3 So, for some odd reason, the GeForce 6200 that is in the AGP 4x slot is not running at 4x, but 2x. The card itself supports AGP 4x and even 8x. When I enter the BIOS, the options for the AGP slot only allow 2x as the max. Before, the max option for the AGP slot in the BIOS was 4x. (I do get the 4x option after I reset CMOS, but it does not stick after a restart.) I don't exactly know what the problem could be, but a few weeks ago, this machine's hard drive was reformatted and got a fresh install of XP. Also, I did install Rivatuner, but I never overclocked it at all. (I uninstalled it after thinking that it had done something.) Otherwise, I cannot figure out the cause of the problem. Does anybody have an idea why this is happening? (Would I have to do another reformat?) Thanks in advance. PS: the other options for the AGP slot are aperture size (which I tried changing, but it did nothing) and FastWrite (enabled by default).

  Read the article

• How can I backup entire installations of a program, instead of just manually backing up individual f

  - by NoCatharsis

  It seems pretty straightforward to backup individual files, such as pictures, saved games, or settings files - just copy them straight over to your 2nd HDD or to an online service like DropBox. However, is there any way to backup entire installations of a program? For instance, my Firefox directory has a lot of personal customizations and add-ons. I don't want to go through each item and decide to back it up or let it go. So my next option is to copy out the entire directory for backup. But, if I copy the entire directory back onto the HD after a format, it is not an integrated installation and this seems like it could be troublesome. I would assume Windows cannot detect the directory for uninstallation, or would not let you choose Firefox as your default browser, right? I'm no pro, but this sounds like a bad idea. So my question is whether there is a good way to preserve all necessary files, while also preserving the full installation process of an application. This is not specific to Firefox - I would like to know how to do this for any application. Thank you.

  Read the article

• No Microsoft Security Essentials for Windows 8. So, how to access similar Defender features/settings?

  - by Chris W. Rea

  I just installed Windows 8 Pro. One of the first things I went to do is install Microsoft Security Essentials, thinking I still needed add-on security software, but I've learned here that it isn't required for Windows 8. Witness: Got Windows 8 or Windows RT? Windows Defender for Windows 8 and Windows RT provides the same level of protection against malware as Microsoft Security Essentials. You can't use Microsoft Security Essentials with Windows 8, but you don't need to — Windows Defender is already included and ready to go. [...] All well and good. However, on Windows 7, once you installed Microsoft Security Essentials, you got a tray icon, and from there you could access the features of MSE, such as perform custom scans, turn off real-time protection (temporarily, of course), check for updates, etc. However, Defender on Windows 8 doesn't display a tray icon – and yes, I've already made sure I'm displaying all icons in the notification area. So, how to access the similar specific features of Windows Defender on Windows 8?

  Read the article

• Configure a Windows PC as network appliance w/o monitor, keyboard and mouse

  - by Joshua Lim

  I intend to use a small form factor PC with Windows 7 Professional installed as a network appliance attached directly to my customer's LAN without connecting a monitor, keyboard or mouse. How should I configure the networking for my PC so that I can access it via say my laptop? I figure that I can do it 2 ways. Attach my laptop to the PC using a crossover cable? Connect via RDP and configure networking. Configure an IP address on the PC before I deliver it to the customer place. At the customer's place, attach the PC to LAN and connect to the IP address which I previously configured from my laptop or from one of the customer's workstations. I know the first way is doable, but is the second way possible? I'm sorry if this question sounds ridiculous - I am Delphi programmer but a novice on networking. Finally, if possible, I hope to make the configuration process web based as I wouldn't like to reveal the fact that I am using Win7 Pro for the network appliance!

  Read the article

• How should a small company administer their web server?

  - by John Isaacks

  We currently have our website hosted by a small company that is actually a reseller for Rackspace. They act as our server administrators. They configured the servers, handle the backups, if there is a problem, we call them and they fix it. We are growing and want to move away from our shared server to either a cloud or dedicated server. I am thinking cloud myself but I am open to either. The current company doesn't seem to want to offer us anything more than a shared hosting plan. I looked into cloud solutions at vps.net, with them I would have to be the server administrator myself. I am the website programmer but administering the server is outside my comfort zone. vps.net does have a $99/month plan for Pro-Active Managed Support but I am not sure if this is the equivalent on a server admin that is there when you need them. We could hire someone in house, but I think that would be overkill for our needs. I am not exactly sure what we need, I do know we need as close to 100% uptime as we possible can. and we need the ability to add/remove/change the server configuration/software/etc. when needed (though changes shouldn't be very often once everything is setup right). Can someone point me in the right direction? What do other companies do?

  Read the article

< Previous Page | 381 382 383 384 385 386 387 388 389 390 391 392  | Next Page >