Search Results

Search found 16748 results on 670 pages for 'port block'.

Page 389/670 | < Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >

• Bridge virtual machines out WLAN interface

  - by Thomas

  It seems that my wlan card (intel 5100 AGN) firmware doesn't allow "spoofing" MAC addresses. This has the side effect of destroying the capability to bridge out my virtual machines on that interface. Apparently this is a common thing on wlan cards. I can see the incoming traffic just fine in my virtual machines, but their DHCP queries don't get bridged out of the WLAN card. It works perfectly well when using the wired ethernet port. Is there a workaround for this? MAC-NAT or something? I don't want to route my virtual machines out to the Internet because I don't want my host OS to even have an IP address. I'm using Linux and KVM for virtualization.

  Read the article

• Numlock on when computer is off

  - by George Duckett

  I have a desktop PC which was recently moved. Since moving I've noticed that even while the PC is turned off (but wall socket turned on) the NumLock LED on the keyboard is on. It may have been doing this before the move, but I've only noticed it now. Maybe it matters that the keyboard is connected via a shared mouse/keyboard PS/2 port and I'm running Windows 7. I've not checked whether the LEDs are just keeping whatever state they were in when I turned the PC off but will do this if that information could be relevant. Why does the led stay on when the PC is turned off and how can I prevent this?

  Read the article

• Sonicwall - dual WAN ports - switch from one to another

  - by Charles

  Hi, Folks! I'm using a SonicWall NSA 240 which has two WAN ports (T1 and Comcast) and the LAN port has a cable which connects to a switch. From the switch, several cables connect to other switches. The SonicWall doesn't have DHCP enabled; one of our domain controllers running Windows Server 2003 also functions as a DHCP server. Is there a way for a user in our network to change connection from T1 to Comcast as their ISP or vice versa? In other words, if a user is connected via the T1, can he/she somehow connect via Comcast instead? Thanks, in advance, for your help! Sincerely, Charles

  Read the article

• Why is DAVExplorer not connecting?

  - by C.W.Holeman II

  DAVExplorer is not connecting. Connecting to a WebDAV Server states: Once you have entered a location URL, and (if necessary) your login name and password, DAV Explorer will connect to the remote WebDAV server, and request a listing of the resources there. A hierarchical view of the sub-collections will be displayed Invoke Apache Jackrabbit $ java -jar jackrabbit-standalone-2.0.0.jar --port 8200 Welcome to Apache Jackrabbit! ------------------------------- Using repository directory jackrabbit Writing log messages to jackrabbit/log Starting the server... Apache Jackrabbit is now running at http://localhost:8200/ Use DAVExplorer $ java -jar DAVExplorer.jar Then connect to localhost:8200/repository/default/ which pops up: Login ===== Login name: [admin] Password: [admin] <OK> The pop up closes then nothing changes. Using cadaver confirms Jackrabbit is working: $ cadaver http://localhost:8200/repository/default/ Authentication required for Jackrabbit Webdav Server on server `localhost': Username: admin Password: dav:/repository/default/> ls Listing collection `/repository/default/': succeeded. Coll: com 0 Mar 13 11:07 Coll: it 0 Mar 13 11:07 Coll: net 0 Mar 13 11:07 Coll: org 0 Mar 13 11:07 Coll: za 0 Mar 13 11:07

  Read the article

• mount: mount to NFS server 'IPADDRESS' failed: RPC Error: Program not registered

  - by matt74tm

  I've got two Redhat5/CentOS systems which share a folder. I'm trying to change the shared folder location, but I ran into this error on the machine on which the folder is mounted... How can I correct this? I rebooted the computer but to no avail. Server1 - where its "mounted" /etc/fstab IPADDRESS2:/opt/programA/common/files /srv/server2-share nfs rw,intr 0 0 Server2 - where its "shared" /etc/exports /opt/programA/common/files IPADDRESS1/28(rw,insecure,sync,no_root_squash) Ran the following on Server2 root@server2 [~]# /etc/init.d/nfs start root@server2 [~]# rpcinfo -p program vers proto port 100000 2 tcp 111 portmapper 100000 2 udp 111 portmapper 100011 1 udp 875 rquotad 100011 2 udp 875 rquotad 100011 1 tcp 875 rquotad 100011 2 tcp 875 rquotad 100005 1 udp 892 mountd 100005 1 tcp 892 mountd 100005 2 udp 892 mountd 100005 2 tcp 892 mountd 100005 3 udp 892 mountd 100005 3 tcp 892 mountd root@server2 [~]# /etc/init.d/nfs status rpc.mountd (pid 10204) is running... nfsd (pid 10201 10200 10199 10198 10197 10196 10195 10194) is running... rpc.rquotad (pid 10189) is running...

  Read the article

• Apache can't connect to LDAP server

  - by jldugger

  I'm tying SVN to LDAPS by way of Apache. I've run openssl s_client --host $host --port 636 and received an SSL certificate, so it doesn't appear to be a firewall problem. I get the following warning: [Fri Apr 02 07:38:15 2010] [warn] [client <ip withheld>] [590] auth_ldap authenticate: user jldugger authentication failed; URI /internal-svn [LDAP: ldap_simple_bind_s() failed][Can't contact LDAP server] "Can't contact LDAP server" is somewhere between vague and wrong. I'm at a loss on how to continue debugging this. Ideas?

  Read the article

• OpenVPN Bridge on pfsense: once LAN pings clients, connectivity breaks

  - by Lucas Kauffman

  So I'm using a pfsense openvpn to bridge my LAN segment so VPN users can access the servers. The problem I'm having now is that I can establish a connection, I can ping the LAN server from the VPN, but as soon as I ping the client from the LAN server, there is no connectivity anymore between both parties. So: connect from the VPN client to the LAN = works ping the LAN from the VPN client = works access server from the VPN (ssh, ftp,...) = works ping client from server = doesn't work ping LAN from the VPN client = doesn't work anymore My bridge has em1 and ovpns1 bridged. I noted with tcpdump that ICMP is reaching the bridge between LAN and the VPN segment. But it's not put onto the em1 interface for some reason. My pfsense is running on an ESXi host with th vSwitch port enabled in promiscious mode. Firewall rules allow in and outbound traffic regardless origin or destination.

  Read the article

• Changing linksys router configuration from command-line

  - by Dan

  I am constantly logged into (ssh'd) my home machine (ubuntu) from various remote locations. Sometimes I would like to change my home linksys router settings (change the port forwarding settings or disable/enable wireless, things like that). When I try and use the links2 text browser, there isn't much I can do because the tab titles don't show up (presumably because they are pictures?). Is there another way of configuring a linksys router from a command line? I guess my only other option is to set up a proxy on my home machine and use a browser connected to that proxy to configure it, but I would think there might be a non-browser way of doing it. Thanks

  Read the article

• SharePoint 2010 Search - not search additional content sources

  - by Chris W

  I've got SP 2010 crawling a secondary intranet system that we'll run in parallel as part of a long running migration to SharePoint when it releases. Whilst it's crawling the pages without problem I can't see how to get the results to appear as part of the Quick Search results if the user does a search from the little search dialog box on the home page. Searches completed within a My Sites pages lists results from port the SharePoint installation and the external content source. Searches from the main search dialog only list results of SharePoint items. I tried adding the drop down option to select the site to search but this list only includes the name of the current site and doesn't offer an 'All Sites' scope option which I think would include the content. What am I doing wrong?

  Read the article

• Smoothwall Express interface issues

  - by Timbermar

  I have a SmoothWall Express box that is currently configured with a Green and Purple interface. Both interfaces are in the same /24 subnet (which seems odd to me). The green interface (address of .254) has a DHCP server that is pushing addresses from .1 to .100 and the purple interface (.253) is pushing addresses from .101 to .120. Every machine here is trusted, and as such is connected to the green interface via a wired connection or wireless APs. Nothing is connected at all (port is physically empty, traffic graphs show no activity) to the purple interface. However, every machine here is pulling addresses from the purple interface. So the question boils down to, how do I remove/stop my machines from pulling from the purple dhcp interface? Also, shouldn't the purple interface (if we were using it for guest Wifi or something) be on a different subnet (i.e. 192.168.100.0/24 instead of 192.168.1.0/24 with all the trusted machines)?

  Read the article

• How do I keep second monitor (HDTV) from auto-disabling in XP when it is turned off?

  - by ThantiK

  I have a new 32" TV that I hooked up to the HDMI port on the back of my video card to use as a second monitor. I used an HDMI/DVI cable to hook it to the TV, and whenever I turn my TV off, XP disables the device tied to the TV so each time I want to use the TV as the monitor, I have to go into my display properties and enable it; it gets pretty annoying. How do I turn this 'feature' off? -- I have an NVidia card should it be specific to the nvidia control panel.

  Read the article

• Belking Wireless Router unable to connect to internet although wireless connection is working

  - by ptamzz

  I have a Belkin Basic N150 Wireless router. I'm trying to set up wireless connection using the wired ports my university has provided in my hostel room. Usually, when I connect my laptop using a LAN wire through the port, my settings are like IP: 10.5.130.X Subnet Mask: 255.255.254.0 Default Gateway: 10.5.130.250 DNS Server: 10.200.1.11 and I'm able to connect to the internet. Now instead of connecting my laptop directly, I've connected the lan wire to the Belkin Wireless Router, set the router as "Use as an Access Point" and in the IP field, I've put up 10.5.130.1. Now I've set the IP of my system manually to 10.5.130.3. I'm able to connect to the wi-fi but I'm still not able to connect to the internet. What am I missing?

  Read the article

• SATA 3 PCIe Controller working with decreased performance (slower than SATA 2)

  - by V M

  After reading this question about maxing out an SSD I decided to do so myself. My mobo only supports SATA 2 and has two PCIe 2.0 x1 connectors (which promiss up to 500 mb/s). So after some searching I decided to go with this controller from amazon. My Samsung magician benchmark before upgrade (running SATA 2): Now after installing the controller all of the benchmark scores are lower (even though the Samsung Magician app confirms its connected to a SATA 3 port): What can I do to remedy this? Any help is appreciated.

  Read the article

• Limit download usage for clients

  - by Kumar P

  i am maintaining few windows xp machines under rhel 5 . i want to set quota for download file size. How to do it ? I mean, in lan usar A's maximum donload file size is 300 MB , and user B's maximum download file size in 200 MB. I want to block downloading when user try to download more than 300 MB file.User should not allow to download 300MB file at a time. Or how to set quota for maximum download per day, is there possible to do it ? How can i do this ?

  Read the article

• How to use Client for NFS on Windows Vista?

  - by netvope

  I've installed "Client for NFS" on my 32-bit Windows Vista Ultimate. However, I can't find it in the start menu, and can't find any documentation on how to use it. How do I connect to a NFS share using "Client for NFS"? Can I map it to a drive letter? How do I choose connection options, such as my uid/gid, mount as read-only, port number, etc? Ideally I would like to map a NFS share using the command line. You may also suggest alternatives to "Client for NFS".

  Read the article

• Strange failure audit in 2003 R2 X64 SP2

  - by Az

  our server is running 2003 R2 X64 SP2, we keep seeing this in clusters of around 4 rapid fire. Sometimes 2 hours, sometimes around 8 hours apart with slight variations. I am also seeing the same blank username and domain in an account locked out message, I have tried disabling all scheduled tasks, if anyone has any idea please let me know! I find these processes running out of svc host: AeLookupSvc, AppMgmt, BITS, Browser, CryptSvc, dmserver, EventSystem, helpsvc, IAS, lanmanserver, lanmanworkstation, Netman, Nla, RasMan, Schedule, seclogon, SENS, SharedAccess, ShellHWDetection, winmgmt, wuauserv, WZCSVC Logon Failure: Reason: Account currently disabled User Name: Domain: Logon Type: 3 Logon Process: Authz Authentication Package: Kerberos Workstation Name: PPCLUBES_TS Caller User Name: PPCLUBES_TS$ Caller Domain: PPCLUBES Caller Logon ID: (0x0,0x3E7) Caller Process ID: 928 Transited Services: - Source Network Address: - Source Port: -

  Read the article

• Problems Running Cherokee Web Server Admin - config_reader.c:249 - Parsing error

  - by Sebastian

  I'm running Cherokee web server 0.99.30 on (Ubuntu Hardy) and I have been having some issues getting the admin to run property. When I run sudo cherokee-admin -b Login: User: admin One-time Password: {password} Web Interface: URL: http://localhost:9090/ [20/11/2009 22:57:29.733] (error) config_reader.c:249 - Parsing error Cherokee Web Server 0.99.30 (Nov 20 2009): Listening on port ALL:9090, TLS disabled, IPv6 disabled, using epoll, 4096 fds system limit, max. 2041 connections, caching I/O, single thread When I go to the admin page I get a 503 Service Unavailable error page. Any idea about how I could fix this? Thanks

  Read the article

• What is a good custom MAC address? [closed]

  - by rausch

  My new notebook has been dropping the WiFi connection infrequently. The reason was, that my PS3 had the same MAC address. I changed the MAC address of my notebook and the WiFi is now stable. At first I just reduced the address' last block by 1, which happened to be the MAC address of another device. I reduced it again and for now it's fine. In order to avoid conflicts in the future, is there an address range that is safe to use for custom/non-vendor MAC addresses?

  Read the article

• OS X 10.7.5 - telnet: connect to address 10.0.0.12: Operation not permitted

  - by user2169619

  I have troubles to connect from macos to reach windows shares and I hit some general problem with my macos. When I try to telnet to 445 port to my windows share server the macos throws "Operation not permitted". I have no firewall rule and I'm not able to google anything. sh-3.2# telnet 10.0.0.12 445 Trying 10.0.0.12... telnet: connect to address 10.0.0.12: Operation not permitted telnet: Unable to connect to remote host Any idea what can be the reason?

  Read the article

• VirtualBox in production?

  - by MrG

  I'm planning to move a service which is currently powered by Debian into a VirtualBox. That would allow us to easily port it i.e. to a faster machine if required. The setup would be: debian host > Virtual Box #1 > debian instance #1 running Apache & application > Virtual Box #2 > debian instance #2 containing database Do you have any experience with a production setup based on Virtual Box? Is it stable and fast enough? Many thanks!

  Read the article

• Can't communicate using PuTTY, but can with Termite

  - by SharpHawk

  I'm trying to establish a serial connection to a peripheral from my PC's RS-232 port. Pretty simple stuff, and I've had not trouble doing it with countless peripherals before. And yet when I configure PuTTY to the right baud rate, stop bits, etc. I'll type in "*IDN?", press enter, and the unit won't reply. After going over my settings over and over again, I decided to try another terminal program, Termite. This time it worked like a charm. What puzzles me, and what I'm trying to figure out by posting this question, is why Termite would work when PuTTY did not despite the fact that they both have the same settings. PuTTY: http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Termite: http://www.compuphase.com/software_termite.htm EDIT: I now tried Tera Term as well, and it works. So PuTTY is the odd one out.

  Read the article

• redirect on a Domino HTTP server?

  - by oidsman

  Simple question but:- We have a server running Domino Http server on port 80. We have another apache server running on 8081. We want to set a DNS entry (say 'Things') to point to a page on the 8081 server. As I see it we need to do some kind of redirect on the Domino server to say that any traffic from hostname 'Things' gets a redirect to "http://server:8081/content/". So, in summary, if I type in "http://Things" on my browser I get redirected to "http://server:8081/content/" Does anyone know how to do this on the Domino Http server? Thanks in advance for your help!

  Read the article

• What ports do I need open for IMAP connections

  - by iamjonesy

  I'm developing a web application that connects to an IMAP mailbox and fetches emails as part of it's functionality. The application is PHP and I'm connecting like this: public function connect() { /* connect to gmail */ $hostname = '{imap.gmail.com:993/imap/ssl}INBOX'; $username = $this->username; $password = $this->password; /* try to connect */ $this->inbox = imap_open($hostname,$username,$password) or die('Cannot connect to Gmail: ' . imap_last_error()); } Developing locally on my mac this was fine, I was able to connect and get emails. However now that I've put the app on my web hosts server I'm getting the following error: Cannot connect to Gmail: Can't connect to gmail-imap.l.google.com,993: Connection timed out After checking with my hosting provider they told me outgoing connections on port 993 are blocked. Is there anyway around this? Otherwise I need to upgrade to a dedicated server :S

  Read the article

• Can I use PLink and Pageant with Cygwin's ssh?

  - by Jerph

  I'm now using msysgit because of the GUI tools, which use Putty's Pageant and PLink utilities, but I use Cygwin as a general SSH terminal. I had been using ssh-agent on Cygwin, but that means I have to enter my SSH key passphrases for both SSH key managers. Is it possible to configure all my Unix-port tools (msys, git, cygwin, Ruby Net:SSH, etc.) to use PLink/Pageant instead of ssh-agent? It seems that's the kind of thing PLink was made for, but I can't find documentation on how.

  Read the article

• Certain users cannot get to my server

  - by Zeno

  I am finding more and more users that report they cannot reach my server (website or services). Their tracert from that user looks like this: Tracing route to domain.com [*.*.*.255] over a maximum of 30 hops: 1 * * * Request timed out. The server is up and functional and every else reports it is fine. But there are various users who cannot get to it. I have no firewall or anything that would block anyone. Yes, the last part of the server IP is 255. Could this be causing it? http://www.dslreports.com/forum/r18539206-Last-octet-255-bug-on-Windows Or would a certain ISP be denying traffic to my server? Or something on their router level?

  Read the article

< Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >