Search Results

Search found 16748 results on 670 pages for 'port block'.

Page 393/670 | < Previous Page | 389 390 391 392 393 394 395 396 397 398 399 400  | Next Page >

  • Radeon HD 5770 - DisplayPort Problem

    - by Nick Schmit
    I am trying to set up 3 monitors with the Radeon HD 5770 I recieved a few days ago. I have read that I can use 2 DVI ports and an active DisplayPort adapter for a third DVI monitor. I have purchased this adapter: http://www.accellcables.com/products/DisplayPort/DP/dp_dvid.htm I have the two normal DVI monitors working, but when I try to extend the display to the third, I get a message saying the system has detected a problem with the connection through the display port which may limit resolution/refresh rate. I know that all the cables are fine, I have replaced the adapter, the monitors all work, I have tried different monitors through the adapter, and even nothing but the adapter, but I cannot get any monitor to work using it. I am trying to use 2 Dell monitors and an Acer. Have I overlooked something? Is there a compatibiliy issue I missed? Any suggestions as to what I could try? Thanks in advance.

    Read the article

  • Configuring a Unified Communications Certificate for many virtual hosts running in Jetty

    - by rrc7cz
    I have a single IP with Jetty serving up X sites on port 80. Basically you can sign up for our service, then point your domain www.mycompany.com to that IP, and Jetty will serve up your custom site. I would like to add SSL support for all sites. To simplify things, I've looked at getting a single Unified Communications Certificate to plug into Jetty and have it work for all sites. Is this possible? Has anyone done this before? Does Jetty only support traditional, single-domain certs? What issues might I run in to compared to a single-domain cert?

    Read the article

  • Why is this static routing not working ?

    - by geeko
    Greeting gurus, I'm trying to develop a DHCP enforcement extension like Microsoft NAP. My trick to block dynamic-IP requesting machines (that don't meet certain policy) is to strip the default gateway (no default gateway) stated in the IP lease and set the lease subnet mask to 255.255.255.255. Now I need the blocked machines to be able to reach some specific locations (IPs) on the network. To allow for this, I'm including some static routes in the lease. For example, I'm including 10.10.10.11 via router 10.10.10.254 (the one to which the blocked machine that needs to access 10.10.10.11 is connected). Unfortunately, as soon as I set the default gateway to nothing, blocked machines cannot reach any of the added static routes. I also tried classless static routes. Any ideas ? any one knows how MS NAP actually do it ? Geeko

    Read the article

  • S.M.A.R.T - Predictive Failure Count

    - by Bastien974
    I'm monitoring my IBM ServeRAID M5015 controller for RAID status with MegaCLI, I have this on one of the disk : Enclosure Device ID: 252 Slot Number: 6 Enclosure position: 0 Device Id: 14 Sequence Number: 2 Media Error Count: 32 Other Error Count: 0 Predictive Failure Count: 18 Last Predictive Failure Event Seq Number: 8119 PD Type: SAS Raw Size: 279.396 GB [0x22ecb25c Sectors] Non Coerced Size: 278.896 GB [0x22dcb25c Sectors] Coerced Size: 278.464 GB [0x22cee000 Sectors] Firmware state: Online, Spun Up SAS Address(0): 0x5000c50042c319c9 SAS Address(1): 0x0 Connected Port Number: 5(path0) Inquiry Data: IBM-ESXSST9300653SS B6336XN04HC10525B633 IBM FRU/CRU: 81Y9671 FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive: Not Certified Drive Temperature :33 Celsius What does this mean exactly ? I can't find an exact description, is there a way to have more details ? The RAID array has the Optimal state. Media Error Count: 32 Predictive Failure Count: 18 Is there a way through the CLI to power-on the front LED so I physically know which disk I need to replace ?

    Read the article

  • Setting up a router as a DNS server only

    - by Jacob R
    I have a Linksys WRT54GL router that I don't need anymore, since I had to buy a 3G capable router (Dovado 3GN). As I only have a 3G connection at home, I want to optimize it as much as possible. I want to setup a caching DNS server, including some blacklisting of ad domains. The router currently runs the DD-WRT firmware. Is it possible to use this router as an ordinary computer, running only a DNS server, disabling all other features such as DHCP, WLAN, etc? Connecting it to my other router, should I simply run a cable into the WAN-port of the Linksys router?

    Read the article

  • How does Router know where to forward packet

    - by kornelijepetak
    If several computers with local addresses (192.168.0.#) are connected to a router and each computer opens a web browser and requests a page over HTTP, when these TCP:80 packets are sent out, the router switches the local address with the static IP of the router (i.e. Provider given IP) so the server can reply to the appropriate address. But how does the router know to which computer to forward the HTTP reply, since the TCP header does not contain the local IP address (does it?), and all computers are using port 80? Does this have anything to do with the MAC addresses? How exactly does this work?

    Read the article

  • How to document linux server configuration?

    - by Margaret Thorpe
    Hi, I have about 20 linux servers which I need to document the configuration of. I do not mean the detailed configuration of services, but rather user accounts, databases, databases accounts, ip addresses, physical location, SSH port etc. etc. I know all this data is stored in config files, but I want to centralize it all. I am considering just creating a spreadsheet to record this data, but was wondering if there is something better (perhaps a small php/mysql app) which would be more structured and complete than a hacked together spreadsheet. What do you use?

    Read the article

  • My D-Link's Ethernet bridge downlink just got 10-30x slower?

    - by Jay Levitt
    TL;DR: I unplugged my network to move my desk, and now downloading via my DIR-655's Ethernet LAN bridge is 10-30x slower than the Ethernet switch it's plugged into. Background My network is SMC cable modem <-> Cisco firewall <-> Netgear switch <-> D-Link WiFi† | | | | SMC8014 ASA-5505 GS608v2 gigE DIR-655 rev A3 gigE †The DIR-655 is used as an access point, not a router (although what D-Link calls an access point, I'd call a bridge). The "WAN" port is unused; the Netgear connects to the built-in 4-port Ethernet LAN switch, inside the built- in router/firewall. Endpoints: MacBook Pro 17" mid-2010 iPhone 4S Fedora 12 Linux server running reasonably fast dual-Athlon X2, VelociRaptors, etc. All cables are <10 feet, mostly CAT-5e, some CAT-6, all premade. All WiFi endpoints are within three feet of the D-Link. Yesterday I unplugged and rearranged stuff, and now connecting via the D-Link - even through the wired switch, right next to the incoming network cable - is 30x slower than connecting directly to the Netgear switch, on both my MacBook and iPhone. How I'm measuring "slower" I'm mostly using http://speedtest.net, which of course only really measures broadband speeds. I've also installed http://www.speedtest.net/mini.php on my local server, but can't test the iPhone with that. Results Speedtest.net, closest server over Comcast business-class: CONFIG | PING (ms) | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> Netgear | 9 | 31.6 | 6.8 Mac <-> Ethernet <-> D-Link | 8 | 4.1 | 6.0 Mac <-> WiFi <-> D-Link | 9 | 1.4 | 2.9 iPhone <-> WiFi <-> D-Link | 67 | 0.4 | 1.6 Speedtest Mini on Linux PC: CONFIG | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> NetGear | 97.2 | 76.9 Mac <-> Ethernet <-> D-Link | 8.2 | 24.2 Mac <-> WiFi <-> D-Link | 1.0 | 8.6 Slow typing in SSH: Mac <-> Ethernet <-> Netgear <-> Linux PC: smooth Mac <-> Ethernet <-> D-Link <-> Linux PC: choppy Note that D-Link upload speeds are normal on broadband, slower locally (but I'd believe that's a D-Link limitation), and always faster than the downloads! Since ssh is choppy just with slow typing, I don't believe it's a throttling-type problem either; that's not a lot of bandwidth. What I've tried Swapping all "good" and "bad" cables Re-plugging "bad" cable from D-Link to Netgear and watching it be the "good" cable pulling cables away from power lines Verify that the Mac auto-detects the D-Link as gigE Try to verify the link speed of the D-Link <- Netgear connection, but the firmware doesn't report that Verify that the D-Link sees no TX/RX errors or collisions Use different Ethernet ports on both Netgear and D-Link Reset the D-Link to factory settings Upgrade the D-Link firmware from 1.21 to 1.35NA, 2010/11/12, the latest Reboot everything at least once On the Mac, disable Wi-Fi during the Ethernet tests, and unplug Ethernet during the Wi-Fi tests Using iStumbler, verify that the D-Link isn't picking overloaded Wi-Fi channels (usually just 1-5 neighbors on my and adjacent channels, average for my apt building) Verify that the only client connected to the Wi-Fi was the iPhone Verify that nothing was being chatty on my network according to the WISH log Enable and disable all sorts of D-Link settings, including forcing WAN auto-detect to gigE So. I don't mind buying a new access point—I wouldn't mind having a dual-link network—but as a guy who's been networking since gated v4 was a drastic rewrite, and who often used physical sniffers in the days before Wireshark, I'm baffled. I hate being baffled. What could I possibly have changed that would result in this? How can I measure it? All I can think of is a static zap—thick carpet, socks, HVAC—but I didn't feel one, and does that really happen anymore? Can I test if it's Ethernet vs. TCP layer slowness? I'm not familiar with modern network utilities; it's hard to Google without hitting "Q: Why is my network slow? A: Is your microwave on?" If I don't get an answer here, will someone big and powerful help me migrate it to serverfault without getting screamed back here? In the words of Inigo Montoya, "I must know." Don't get all Dread Pirate Roberts on me.

    Read the article

  • Computer not displaying anything

    - by Justen
    The computer in question worked last week. It's brand new, never been connected to the internet, up-to-date parts, etc. Last week, I installed some 3D software on it, then shut it down and waited for the license files that arrived this week. I've done this to 4 other PCs with the same hardware and software. I've tried: Hooking it up to 3 different monitors using different video cables 2 other graphics cards and a handful of other things like switching which port it's plugged into before and after a restart. I have the driver disc, and a windows reinstallation disc, but they won't do me any good because no display at all for any interval of time. All the fans are moving: psu, gfx, cpu etc, so I don't believe it's a power issue. Here are the specs I know of: 4GB RAM 8800 GTX 700w PSU Intel dual core (not sure of model) Anyways, I'm open to ideas.

    Read the article

  • PuTTY/SSH: How to Prevent Auto-Logout?

    - by feklee
    My ISP's SSH server (Debian 2.0) logs me out after 35 minutes of inactivity, when connected with PuTTY (Windows XP). This is a big problem when I utilize the server for port-forwarding. The final messages displayed in the terminal: This terminal has been idle 30 minutes. If it remains idle for 5 more minutes it will be logged out by the system. Logged out by the system. PuTTY options that do not help: Sending of null packets to keep session active. Seconds between keepalives (0 to turn off): 30 [x] Enable TCP keepalives (SO_KEEPALIVE option) Any idea how to avoid the auto-log-out? Should I try another SSH client?

    Read the article

  • Get OWA and ActiveSync working on server using HTTP redirect in IIS 7

    - by eric
    We have two servers on our LAN. One is a Windows 2003 Server domain controller running Exchange 2003. The other is a stand-alone Windows 2008 server running IIS 7. Our company website runs on the IIS 7 (2008) server, so the firewall forwards port 80 to this. How can I get OWA and ActiveSync to work with this setup? And without using SSL. I have tried setting up a website on the IIS 7 box (mail.ourdomain.com) and using HTTP redirect to point to http://mailserver/exchange, but this doesn't work. Do we have to purchase an SSL certificate for this to work?

    Read the article

  • IIS exclude specific host?

    - by chakrit
    I have an IIS server running several websites. It is stationed behind an ISA server of which I do not have access. But I do have all of the defined websites (on port 80) routed to my server. So I want to take down one website, say it's foo.bar.com and in its place setup a LAMP server instead using a VM software. It needs to run alongside all the existing websites and it should not interfere with them. I have full control over my server, but not the ISA. Is this possible? If so, how? The OS is Win Server 2003 Standard with IIS6

    Read the article

  • Only allow certain processes to connect to MS SQL

    - by Fred
    I've lost the source code for a very old application that connects to a MS SQL-server for some SQL queries. Since the login is hard-coded in the application I can't change the username/password on the server. One day the password will probably be known to the users and we surely need to change it. But how? One idea is to only allow the old application to do the queries on the SQL server and block out any other application like the query analyzer etc. Can I set process permission somehow? The SQL server (MS SQL 2005) and application (C++) are on the same machine It's too costly to rewrite the old program Thanks for help!

    Read the article

  • Internet connection very slow after Linksys configuration

    - by NLV
    Hello We have this network setup Server1 - DHCP server, Domain Controller, AD Lease line for Internet connection From lease line to Linksys router (we dont use wireless though) From linksys to Netgear (24 port Switch) and vonage (VoIP) Netgear to all our machines We configured Linsys with the static IP and DNS server addresses our ISP gave and we have routed it correctly. All our work machines are configured with Get IP automatically DNS server addresses our ISP gave The problem is that none of the sites are getting opened promptly. It is taking around 5 minutes to load google.com. But we are able to ping all the sites. What could be the problem?

    Read the article

  • GDM login screen is not displayed with VNC

    - by niboshi
    Hi, I set up VNC server with xinetd. Also configured GDM so that XDMCP is enabled. VNC connection seems okay, but GDM login screen is not shown. Instead I can only see old bare X screen (gray meshed background and X-shaped mouse pointer), which I can't do any interaction with it. What can I do to fix the problem? No log is written below /var/log/. Server distribution: Ubuntu marverick /etc/xinetd.d/vnc is like below: service vnc1024 { disable = no socket_type = stream protocol = tcp wait = no user = nobody server = /usr/bin/Xvnc server_args = -inetd -query localhost -geometry 1024x768 -depth 24 -once securitytypes=none port = 12345 } /etc/gdm/custom.conf: [daemon] [security] DisallowTCP=false [xdmcp] Enable=true [gui] [greeter] [chooser] [debug] [servers] /etc/services is also configured. Thanks

    Read the article

  • Nginx proxy to s3 bucket gets 400 Invalid Argument

    - by elssar
    I have a Django app in which I serve media files through an nginx proxy to s3. The relevant python code response = HttpResponse() response['X-Accel-Redirect'] = '/s3_redirect/%s' % filefield.url.replace('http://', '') response['Content-Disposition'] = 'attachment; filename=%s' % filefield.name return response The nginx block for the internal redirect is location ~* ^/s3_redirect/(.*) { internal; set $full_url http://$1; proxy_pass $full_url; And the request logged by s3 is. REST.GET.OBJECT <media file> "GET <media file>" 400 InvalidArgument 354 - 4 - "http://<referer>" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_3) AppleWebKit/537.1 (KHTML, like Gecko) Chrome/21.0.1180.89 Safari/537.1" - I, for the life of me, can't figure out what's wrong. The url send to nginx by the app is valid, it works in the browser. And nginx is sending a request to s3.

    Read the article

  • redirect all youtube video requests to a specific one

    - by iTayb
    I'm on an IT team in my company and I would like to block youtube to users. I don't want to just deny access to the whole youtube domain, but only to replace the .flv/.mp4 request with the one that I want. That way, if someone tries to watch youtube videos on the network, He'll get a video of why using our expensive bandwidth for pleasure is a no-no. I thought about using a packet manipulation program and just replace the video ID with something that I want, but I didn't manage to do it right.

    Read the article

  • Management VLAN Cisco Catalyst

    - by cha789
    I have configured a couple of VLANs on a Cisco Catalyst switch, i will put all the ports that clients is connected to, into these VLANs. I want to configure the native VLAN [vlan 1] as management VLAN so i can use a telnet client to connect to the switch. How can i block all but one specific IP-address to telnet into the switch? As i understand vlan 1 has many task regarding different protocols and i do not want to break that but only allow one specific IP-address to connect to the switch with a telnet client [actually the gateway ip address of the switch].

    Read the article

  • Virtual firewall to protect hypervisor

    - by manutenfruits
    I am running an Ubuntu Server 12.10 as a single host connected to a NATed router connected using PPPoE to a optical fiber modem. This server is meant to be accessed from the Internet, but also to be used from the LAN as a SVN, MySQL and what not... The issue is that the router is not customizable enough to serve, so I was thinking about creating a virtual pfSense firewall using KVM inside of the server itself, removing the need of the router. Is this possible? Can the host ignore and block all traffic coming to itself, but not for the firewall? I am aware this is not the most desirable environment, I accept suggestions based on budget!

    Read the article

  • After closing the ssh terminal, the thin server is down

    - by Keating Wang
    I have a rails project run on the thin server(1.3.1) on a ubuntu server. I ssh to the server and start thin with command 'thin start -C config/thin.yml', following the thin.yml, port: 3000 log: log/thin.log timeout: 30 chdir: /home/byht/56platform/dev/tracker environment: production servers: 1 daemonize: true After thin starts successfully, I visit the project and it works well. Then, I close the terminal, I can also visit the pages that have been visited, but when I visit the pages that not been visited before closing ssh terminal, a "500" error appears on the page. I didn't find the error messages in the log file. I have tried start thin with nohup and sudo, but they are useless. I sign in the ubuntu server locally, then the problem disappears. But I need sign in the server to stat thin with ssh when I'm home.

    Read the article

  • Reverse Proxy Wordpress with Lighttpd

    - by Jonah
    I am deploying an application and a Wordpress installation on AWS. I have Wordpress set up under Apache on an EC2, and my application under Lighttpd, and I want to reverse-proxy Wordpress through the application node. This works fine, I just set up the reverse proxy in Lighttpd as so: $HTTP["url"] =~ "^/blog" { proxy.server = ( "/blog" => ( "blog" => ( "host" => "123.456.789.123", "port" => 80 )) ) } url.rewrite-once = ( "^(.*?)$" => "/index.php/$1" ) However, the issue is in the rewrite. When I enable rewriting, it catches it before the reverse proxy, and routes to index.php on the application server. I need it to not rewrite if it's going to the blog. I tried various regex matches and other configurations, but I haven't been able to get it to support rewriting and proxying at the same time. How can this be done?

    Read the article

  • How to setup tomcat 7 as a server on windows 2008 server

    - by birdy
    I setup the tomcat7 as a service as below: c:\Program Files (x86)\Tomcat7\apache-tomcat-7.0.32\bin>service.bat install Installing the service 'Tomcat7' ... Using CATALINA_HOME: "C:\Program Files (x86)\Tomcat7\apache-tomcat-7.0.32" Using CATALINA_BASE: "C:\Program Files (x86)\Tomcat7\apache-tomcat-7.0.32" Using JAVA_HOME: "C:\Program Files (x86)\Java\jdk1.7.0_09" Using JRE_HOME: "C:\Program Files (x86)\Java\jdk1.7.0_09\jre" Using JVM: "C:\Program Files (x86)\Java\jdk1.7.0_09\jre\bin\server\ jvm.dll" However, when I try to start the service, I Get the error below: c:\Program Files (x86)\Tomcat7\apache-tomcat-7.0.32\bin>tomcat7.exe %1 is not a valid Win32 application. Failed to run service as console application This is the file I downloaded from apache: apache-tomcat-7.0.32-windows-x64.zip. I am able to successfully start tomcat on port 8080 as a standalong thing. Meaning I go to command prompt and type startup.bat and it starts up successfully. Question How can I resolve this and what are the things I should be troubleshooting for?

    Read the article

  • cant send using postfix from external ip address

    - by daniel
    i have postfix set up as a satellite to listen on port 587 i can send email outside fine trough the postfix(ubuntu) box from the local network with no problems when i try to connect to the postfix(ubuntu) box from a external ip and send mail it spits back a 554 5.7.1 Relay access denied error i can telnet to it fine, just cant send mail this is my main.cf : smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no readme_directory = no smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_security_options = smtp_use_tls = no myhostname = cotiso-desktop alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = mydomainname.com, cotiso-desktop, localhost.localdomain, localhost relayhost = smtp.mydomainname.com mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all there is no security set up yet, i'm just trying to get it working first any ideas? thanks in advance

    Read the article

  • Sendind an internet radio singal from my hifi to a portable

    - by Paul
    I'm just about to set myself up with a wireless network in my house. This is so that I can intregate an internet radio into my hifi system. What I would love to do is to listen to the radio in another room of the house. I also have a little portable radio/cd player that has a USB port on the front. Is there something I could buy which would allow me to listen to the radio through my portable in another room? I do realize that I could solve this problem by buying some wireless portable speakers, however I just wondered if anybody knew another way i.e. bluetooth or something similar?

    Read the article

  • Why shibboleth IdP idp-metadata.xml recommends 8443 for SOAP?

    - by toma
    After the install.sh of 2.4.0 Shibboleth Identity Server, the idp-metadata.xml file is created. Why is that? Is not enough secure to use the standard HTTPS/443 port? <ArtifactResolutionService Binding="urn:oasis:names:tc:SAML:1.0:bindings:SOAP-binding" Location="https://idp.example.com:8443/idp/profile/SAML1/SOAP/ArtifactResolution" index="1"/> <ArtifactResolutionService Binding="urn:oasis:names:tc:SAML:2.0:bindings:SOAP" Location="https://idp.example.com:8443/idp/profile/SAML2/SOAP/ArtifactResolution" index="2"/> <SingleLogoutService Binding="urn:oasis:names:tc:SAML:2.0:bindings:SOAP" Location="https://idp.example.com:8443/idp/profile/SAML2/SOAP/SLO" /> <AttributeService Binding="urn:oasis:names:tc:SAML:1.0:bindings:SOAP-binding" Location="https://idp.example.com:8443/idp/profile/SAML1/SOAP/AttributeQuery"/> <AttributeService Binding="urn:oasis:names:tc:SAML:2.0:bindings:SOAP" Location="https://idp.example.com:8443/idp/profile/SAML2/SOAP/AttributeQuery"/> Thanks, Tamas

    Read the article

< Previous Page | 389 390 391 392 393 394 395 396 397 398 399 400  | Next Page >