Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 393/1359 | < Previous Page | 389 390 391 392 393 394 395 396 397 398 399 400  | Next Page >

• How to get my laptop to detect SD cards inserted into its built-in card reader?

  - by Candelight

  My laptop has a built-in SD Card reader but it cannot detect one when inserted. Here is the result when I type lspci from the terminal: 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80) 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83) 00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80) 00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01) 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M] 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 05:04.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 05:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 05:04.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 05:09.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g

  Read the article

• Keeping Xv Overlay configuration throughout an X session.

  - by kriss

  After upgrading my Linux system from Ubuntu 9.04 to Ubuntu 10.10, I suceeded correcting most problems (all related to Intel 82865G Integrated Graphics Adapter support and compiz is still not working but that's another matter) but for one I only have a partial solution. Whenever I play a video the colors are much too saturated. This is really a problem for tones of skins that appears reddish (everyone seems to be coming back from a ski vacation with deep sun burns). As this effect only occurs with videos, not with pictures, I finally figured out it was related to Video Overlays configuration and I can correct it typing: xvattr -a XV_SATURATION -v 120 This change the default saturation value, which is 500 and much too high in my case, at eye sight the correct value seems to be between 100 and 150. Now my problem is that I have to type the above command each time I run a video. If I type it before running the video it has no effect, if I close the video and open a new one, I have to type it again, etc. I tried to put it in Xsession and (logically) it has no effect either. How could I do to get the correct setting whenever I run a video without typing the above command every time ?

  Read the article

• How can you remove Unity from Ubuntu Netbook Edition

  - by Brad

  In previous versions of Netbook Remix I was able to disable the netbook-launcher and just have a blank desktop. I liked the speed of the Netbook version but not the interface, this worked well for me. However, now with 10.10 and Unity I'm having trouble doing a similar thing. I tried removing netbook-launcher from the startup and tried uninstalling unity. The best result I got was a black desktop with a panel and a non configurable blank white background. Is Unity soo integrated into this version that I will have to just go with the default ubuntu installation?? In the past the default version has been slower then the Netbook version without the interface. Thanks.

  Read the article

• Screen corruption with 946G / 82945G/GZ [closed]

  - by Ferdinandhi

  Since version 10.04 I have problems with Ubuntu (I think) my graphics card. This problem arises especially when working with graphics or CPU usage much. The problem is that it breaks the GUI as you see in the image and the entire computer is very slow. I'm running Ubuntu 11.04 and have a Intel graphics card 945G x86/MMX/SSE2. I used Unity and Gnome 3 with the same results. lspci returns 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)

  Read the article

• Page not found in browsers

  - by Chetan

  I'm using ubuntu 12.04.1, last upgraded from 12.04 I'm using mts mblaze to access internet. Two days ago, I was using vpn on my system, suddenly cisco disconnected & my system hung while I was accessing my office system. I didnt' have any other idea, so I forcibly shut down the system. After that, connection is made, but firefox or chromium both don't find any page. I think there's some problem with the system package. Please let me know a good solution. Regards, Chetan

  Read the article

• Resize a pendrive Linux?

  - by user11239

  I'm running Ubuntu from USB media, which has a drive capacity of 250 GB, all existing as one FAT32 partition. However, when I created the bootable Ubuntu drive, only 4.79 GB were allocated for usage. Rather than put files directly into the /cdrom where the drive is mounted, I want to expand what is listed here in aufs to be at least 200 GB. I'm hopeful that I can do this live. Output of df : Filesystem 1K-blocks Used Available Use% Mounted on aufs 4051904 4050108 0 100% / none 1542852 284 1542568 1% /dev /dev/sdb1 244076800 4901648 239175152 3% /cdrom /dev/loop0 688000 688000 0 100% /rofs none 1547840 1496 1546344 1% /dev/shm tmpfs 1547840 4828 1543012 1% /tmp none 1547840 80 1547760 1% /var/run none 1547840 0 1547840 0% /var/lock none 1547840 0 1547840 0% /lib/init/rw Output of fdisk -l : Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00083fe4 Device Boot Start End Blocks Id System /dev/sdb1 * 1 30401 244196001 c W95 FAT32 (LBA) So basically what I want to do is get /dev/sdb1 to be entirely, or almost entirely read as aufs. I'm confused over how to do this, as the file systems are all part of /dev/sdb1 on one big partition, rather than separate partitions for separate file systems.

  Read the article

• How to upgrade Compiz to 0.9.8 or downgrade to 0.8.6 in 12.04?

  - by Naveen

  For a very long time, I'm experiencing this bug in Compiz. It makes my windows flash, when rotating the desktop cube. None of the animations work properly execpt the Wobbly windows. However the temporary fix I found on the bug page helped me to reduce the effects, but it's not 100% perfect. Now they have totally fixed the bug in Compiz 0.9.8 for Quantal. I really need to get the official fix on my Ubuntu 12.04. Don't the LTS versions get bug fixes? Sometimes my desktop cube/cylinder appears like this : None of this happened in Lucid Lynx :( Thanks for having a look.....

  Read the article

• Accidental installed jdk 6 and 7 now cant uninstall!

  - by user87587

  I have been trying to install java on my Dedicated server. I have partially installed multiple versions of java and now cannot uninstall them as they all have dependencies. Whenever I try and un-install I get: Errors were encountered whilst processing: openjdk-6-jre-headless openjdk-6-jre E: Sub-process /usr/bin/dpkg returned an error code (1) I AM A NEWBIE Re-install can't be done unless I contact my host and pay 15$ :(

  Read the article

• Ubuntu on USB does not boot on MacBook

  - by Sean H

  Ubuntu is installed on a 32 gigabyte flash-drive and it successfully booted every time up until I partitioned my hard-drive and installed Windows as a secondary boot (for programming reasons). Now every time I attempt to boot the Ubuntu flash-drive it boots into Windows XP. The same goes for partitions, I partitioned my hard-drive and installed Ubuntu and it only booted Windows XP. I am on a MacBook 6,1 with Mac OS X 10.6.8, 2 partitions, and I am using ReFit as my boot-loader. EDIT: I had Ubuntu working fine from FLASH DRIVE and at one point as a partition. I later uninstalled Ubuntu from my hard-drive and installed Windows. I then had to re-image my computer for certain reasons and I installed windows. Now when I attempt to boot anything other than Windows or OS X it boots into windows. Ubuntu was never on my hard drive while Ubuntu was on it. The flash-drive has been its own thing and has the boot-loader installed to it and loads from ReFit but boots into windows.

  Read the article

• Problem running the python code for backup on Ubuntu?

  - by Akash

  I was trying to run following python code through terminal but something is wrong as it is producing some errors source = ['/home/akash/', '/home/akash/code'] target_dir = '/media' target = target_dir + os.sep + time.strftime('%Y%m%d%H%M%S') + '.zip' zip_command = "zip -qr {0} {1}".format(target, ' '.join(source)) if os.system(zip_command) == 0: print('Successful backup to', target) else: print('Backup FAILED') but when i try to run it following error appears zip I/O error: Permission denied zip error: Could not create output file (/media/20131019083404.zip) Backup FAILED

  Read the article

• Any really decent way to get three monitors?

  - by JohnCC

  What satisfactory solutions are there to achieve three monitors on Ubuntu? I know some ATI cards (Eyefinity) can support 3 monitors from a single card, but I don't know how well this is supported under Linux and besides, I've never had much luck with ATI on Linux. The alternative is to try two cards, but there seem to be problems there too. It looks to me like xrandr cannot support 2 GPUs. I believe you'll end up with two separate "Screens" across which you cannot move applications or windows, unless you enable Xinerama which as I understand it disables some acceleration and probably compositing too. I've found so much conflicting information on this online, I'm really confused. Please advise!

  Read the article

• Universal Pen Drive Linux Will Not Burn IOS Ubuntu 13.10 To USB [duplicate]

  - by Nick

  This question already has an answer here: How to create a bootable USB stick? 4 answers Universal Pen Drive Linux will not let me burn the iso to my usb. Whenever I attempt it it says 'can not open file 'E:*where I put my downloads*\ubuntu-13.10-desktop-amd64.iso' as archive'. Any help please. I just want to move to ubuntu and hopefully never have to use windows again :D Please help me and walk me through this process.

  Read the article

• is it possible to make nautilus open with two panes by default?

  - by marc-andre benoit

  Other than usign xdotool to send F3 to nautilus when it starts. (which is a solution..) I'm wondering if anything new as been included in the nautilus codebase that enable it in preferences to open up dual paned by default. I really liked total commander when using windows.. and other than to running it in wine, i haven't found any other more linux native way to manage more intuitively files and folders. (in a gui context) Having two panes open up that remember where i was prior to closing nautilus would be awesome if someone knows how enable it..

  Read the article

• No graphics after installing AMD Catalyst 12.4 and installing the recommended updates afterwards

  - by Innonic

  Some days ago, I installed Ubuntu 12.04. Since I wanted to use dualview using an external display I installed the propriatary AMD Catalyst 12.4. The graphics are fine, but if I run the updates found by the updates manager, Ubuntu won't be able to start with graphics after reboot. I installed Ubuntu 3 times until I realized what the problem was. So now I got the basic installation with Catalyst running but I can't update the system. Is there any solution to this? Or can I somehow identify which update causes this? My System is a Lenovo y560 Ideapad (Intel Core i7, 8GB RAM, with AMD Radeon HD 6570M/5700 Series. Thank you in advance

  Read the article

• What location to put bootloader, when running multiple drives and partition

  - by Matt G

  I have Win8 on my desktop, where a 120G SSD is used to run windows and some select applications, while I have a 2TB HDD to provide basic file storage and where possible, install applications instead of on the SSD. I want to install Ubuntu on a new partition of the HDD (I allocated 300GB, with 5GB swap file). I've used a USB to install the OS, which seemed to have done the job. However, after prompting for a restart, I can no longer boot to ubuntu. During instillation I was confused about where to install the "boot loader instillation". I ended up selecting "/dev/stb" because I figured I would be able to boot with BIOS by selecting the HDD drive as a priority over the SSD. The bootloader is a large part of where I think I went wrong. My partition system looked something like this: /dev/sta ... //SSD ~120 GB /dev/sta1 NTFS (350 MB) //Win8System /dev/sta2 NTFS (118 GB) //Win8C-Drive /dev/stb ... //HDD ~2TB /dev/stb1 NTFS (1563 GB) //FileStorage /dev/stb5 Free Space (300 GB) //Space I want to use for Linux (NOTE: Created two partitions from the 300GB, ~5GB and 295GB. stb5,stb6.) It'd be great if I could get an explanation of what drive you'd select for the boot loader and why, and what selections won't work with regards to the Boot Loader Instillation. I think I understand what Grub is, but I have no idea on how to use it, or play around with it. I seem to be able to get back into OS from my usb, however I believe it's just showing me a preview/trial of Ubuntu (ie, can't access any of the system NTFS drives). Note, if I try to install from the USB again, it will recognize that a version of Ubuntu 13.10 exists on the system. Apologies in advance, have used windows all my life, don't really know to much about Linux at all. Did have a brief skim over some similar questions, didn't find anything too useful. - Where to install bootloader when installing Ubuntu as secondary OS? - ubuntu 12.10 dual boot with windows 8 on two hdds - Dual-boot Windows 7 and Ubuntu on two SSDs with UEFI

  Read the article

• Grab sound of a SDL game with ffmpeg/avconv

  - by Peregring-lk

  I'm trying to make a screencast of a SDL game which I developed some years ago, with the following command: sleep 5 && avconv -f x11grab -s 1366x768 -r 25 -i :0.0 -same_quant screen_cast.mkv (in this 5 seconds of sleep, I open the game). But the generated video (screen_cast.mkv) doesn't capture audio. I use for my game the SDL_Mixer library, with default configuration (22050 for frequency, AUDIO_S16SYS for format, and 2 channels). What's the problem? (with options -f alsa -i pulse it doesn't work either).

  Read the article

• Access a mounted Windows share from the command line

  - by Bryan

  Hello All, I use the "Connect to Server..." option under the "Places" menu to connect to a Windows share in my work environment. When I do so, I can access the Windows share via Nautilus, but I can't figure out how to access the share from the command line without using smbclient. For example, the share isn't mounted under /mnt or /media. Is it possible to access the mounted Windows share from the command line without using smbclient?

  Read the article

• Ubuntu not showing complete list of partitions while installing 10.04 and 10.10

  - by Ravi

  I am a total beginner to Ubuntu. I have tried to install Ubuntu on my 320 gb hard disk and am stuck at the partition page. The problem is, Ubuntu is not showing all the partitions. When I run the live CD and try to see all the drives these are not present. I have presently 4 drives, C: 58 GB D: 48 GB E: 87 GB and F: 102 GB. The F: drive is not shown; at the time of installing it does not show any of the drives, just a chunk of 257 GB, hence I am unable to install Ubuntu on my D: drive. On the C: drive, Windows 7 64 bit is installed.

  Read the article

• How do I reload the clock applet?

  - by Agmenor

  It seems I am running this bug. Sometimes my clock applet just stops running, and I have a pop-up window saying 'The clock has quit unexpectedly'. Between 'Reload' and 'Close', I have unfortunately chosen the second option. Even if I have rebooted, I cannot launch the applet anymore. I am on Ubuntu 10.10. Can somebody give me the command line that I could use in the application launcher appearing when Alt + F2 are hit ? Or any other solution in order to recover the applet on the gnome-panel ?

  Read the article

• Unable to remove some unity lenses

  - by S Prasanth

  I removed the files, video, photos and friends lenses with the following command. sudo apt-get purge unity-lens-files unity-lens-video unity-lens-photos unity-lens-friends Although the corresponding results have disappeared from dash, only the friends tab has been removed. There still are tabs for files, video and photos, albeit empty. How do I remove these empty tabs? I use Ubuntu 13.10 Saucy Salamander. I understand that this issue didn't exist in 12.04. The directory structure of unity lenses seems to have changed from 12.04 to 13.10. Earlier the lenses were stored in /usr/share/unity/lenses/. That isn't the case now, rendering this answer inappropriate: http://askubuntu.com/a/120116/111720

  Read the article

• Cisco AnyConnect VPN Client broke my internet

  - by user137864

  I was using the AnyConnect client when it froze and I had to do a hard reboot of my computer. Now I can't connect to the internet at all, with or without VPN. The Network Connections manager seems to think I have a wired and wireless connection without a problem, but I can't go online. I have tried using /etc/init.d/networking restart and it even says it is "ok" with no luck. I am guessing I need to clear some settings somewhere and restart a service, but I am not sure what. Thanks!

  Read the article

• Bridging 10GbE with 12.04 - bridging works but the bridging computer has no internet access

  - by Donal

  I have been trying to get 12.04 bridging working with two 10GbE cards. I have 2 10GbE cards in a linux box being used only for this bridge, 1 with 2 10GbaseT ports and another with a single CX4 port. I have 2 client computers connected with 10GbaseT cards and the CX4 card connects to a procurve switch. I can get the bridging happening mostly the way that I want, The clients receive dhcp information from the dhcp server (not the bridging machine) and can connect to and properly see the rest of the network. Speeds are ok, not amazing but working on that is another matter. My problem is that the bridging machine has no internet access ... meaning I can't update anything or apt-get anything It can ping all other machines on the local network. I've tried the helpful hints from: https://help.ubuntu.com/community/NetworkConnectionBridge "Enabling Internet Use on the Bridging Computer" and get the following RTNETLINK answers: File exists but dhclient br0 does nothing for me :( I think if it is anything it a multiple route problem as both br0 and eth4 have ipaddresses ... even though I have only set it up so that br0 has one ... Bridge setup details: /etc/network/interface auto br0 iface br0 inet static address 192.168.0.246 netmask 255.255.255.0 gateway 192.168.0.1 broadcast 192.168.0.255 dns-nameservers 192.168.0.1 dns-search example.com dns-domain example.com #(eth2 & eth3 are the 10GbaseT) #(eth4 is the CX4 connection) pre-up ip link set eth2 down pre-up ip link set eth3 down pre-up ip link set eth4 down pre-up brctl addbr br0 pre-up brctl addif br0 eth4 eth3 eth2 pre-up ip addr flush dev eth3 pre-up ip addr flush dev eth2 pre-up ip addr flush dev eth4 post-down ip link set eth4 down post-down ip link set eth2 down post-down ip link set eth3 down post-down ip link set br0 down post-down brctl delif br0 eth2 eth3 eth4 post-down brctl delbr br0 ifconfig -a br0 Link encap:Ethernet HWaddr 00:15:17:22:20:34 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::215:17ff:fe22:2034/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4957 errors:0 dropped:0 overruns:0 frame:0 TX packets:1077 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:596320 (596.3 KB) TX bytes:139952 (139.9 KB) eth4 Link encap:Ethernet HWaddr 00:60:dd:47:7c:05 inet addr:192.168.0.57 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::260:ddff:fe47:7c05/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1 RX packets:15391 errors:0 dropped:51 overruns:0 frame:0 TX packets:1207 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5916769 (5.9 MB) TX bytes:154312 (154.3 KB) Interrupt:70 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth4 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 br0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 br0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth4

  Read the article

• Unable to Connect MTS Mblaze modem in Ubuntu 12.10?

  - by CracLock

  I am using Ubuntu for 1st time and i do have an modem MTS Mblaze in India which i am using in Windows. But when i tried to connect in Ubuntu 12.10 using give default method i.e. choose country, modem type, connection, add details and then connect. But its not working. Then i came over another solution at http://www.e-dirts.com/2012/how-to-setup-mts-mblaze-usb-modem-in-ubuntu-gnulinux/ But no installation of CrossPlatformUI-V2.1.2-SSTL-ALL-ubuntu.deb happens at all. Is it because i'm using 12.10 version while its tested using 12.04 version. And does that another 'Advanced user method' can be followed without internet? Please suggest. Help

  Read the article

• Is there a version of Chrome or Chromium whose bookmarks are visible to the HUD?

  - by Isaac

  I noticed that Firefox has bookmarks that can be executed in the HUD. Love it! Chrome and Chromium, which run javascript apps much faster for some odd reason, allow for history to be called through the HUD, but not bookmarks. This wouldn't be a problem if ALL history was callable, but it seems that Chrome LIMITS the amount of history visible to the hud. Is there a version of chrome or chromium that will see our bookmarks?

  Read the article

• Using 12.04 installation as a persistent pen drive

  - by Cawas

  Disclaimer: I aim to build a self contained pen drive with my application inside, so no matter about updates. Maybe I'm looking at the wrong linux distribution to do this... Please let me know if you think so. I've tried knoppix and even lubuntu, but they don't come with enough "drivers" for Unity3D to work. Creating a custom live persistent pen drive is a real pain and I'm trying for 1 day without any success. Sure, being able to do it would probably be ideal and occupy the minimum space. Using the installation image on a pen drive, however, is good enough and is really easy to create. We can even do it from any OS, using UNetBootin, LiLi USB Creator or some other methods. Straight forward. Some recommend installing it on a pen drive. But that requires a lot of space and, I believe, it won't behave as good as something meant to be installed on a usb disk, because of memory management. So, there are only a few negative points on using the installation image that I can think of. Question here, is how to remove those drawbacks: Having to press "Try Ubuntu". That's the big one. Couldn't find how. Unable to load everything on memory and keep on running without the pen drive (like this) Unable to remove "Install Ubuntu 12.04 LTS" app. Setting the ISO to use maximum amount of space for the OS will leave pen drive with zero space left and any file saved within it from ubuntu is inaccessible from the outside (when plugin the pen drive and not booting from it). Am I missing something? Can those points be fixed?

  Read the article

< Previous Page | 389 390 391 392 393 394 395 396 397 398 399 400  | Next Page >