Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 391/1359 | < Previous Page | 387 388 389 390 391 392 393 394 395 396 397 398  | Next Page >

• How to connect to a wireless network that has a two word name with a space?

  - by grinan

  Ok, I have searched for some time in earnest for an answer to this question. I have a Beagleboard which has Ubuntu 10.10 Minimal install for Arm running on it. With the default install, minimal tools, no GUI, I am unable to connect to my wireless network. The name of my network is "MYNAME NETWORK". Using a text editor to edit /etc/network/interfaces I can not seem to connect at all. As an experiment, I connected to a friends network, which has a one word name "dystek",and was able to connect with Zero issues, and update and install a full GUI for ubuntu Arm. The problem is that I don't want a full blown gui on the beagleboard, just a minimal install of ubuntu with CLI is all I need or want. Is there anyway to connect to my wireless network via editing the /etc/network/interfaces file. Surely there is... I just don't know how. Right now my interfaces file looks like this: auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.1.200 netmask 255.255.255.0 gateway 192.168.1.1 wireless-essid BARRETT NETWORK wireless-key 46456xxxxxxxx Any help would be appreciated.

  Read the article

• Lag when recording with xvidcap?

  - by quangtruong1985

  I used Xvidcap to record my desktop, but the quality of video was too bad (it lagged so much). I also tried with all output formats that xvidcap support, increase the frame-per-second as much as possible and the quality always at 100% but nothing changed. Click to see my video on Youtube Im using 11.04 (unity) with compiz enabled. My card is ATI/AMD Mobility 5450 and all drivers were installed and activated. Please help me! Regards.

  Read the article

• sudo: source: command not found

  - by HorusKol

  I've been updating some of the default profile for bash, and saw from the tutorials I was following that I could reload the new profile with the new environment settings by using: source /etc/bash.bashrc The only thing is - the new environment variables were only available to my current user - and were ignored when I used sudo. They only became available to sudo when I closed my terminal session and rejoined. When I try to use: sudo source /etc/bash.bashrc I get the error: sudo: source: command not found Is there a simple way to load in the new bash profile settings for sudo without having to close the terminal and restart?

  Read the article

• install libreoffice in Ubuntu 12.04 is impossible

  - by user1587239

  What is wrong with Ubuntu repositories? sudo apt-get install libreoffice Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libreoffice : Depends: libreoffice-core (= 1:3.5.4-0ubuntu1.1) but it is not going to be installed Depends: libreoffice-writer but it is not going to be installed Depends: libreoffice-calc but it is not going to be installed Depends: libreoffice-impress but it is not going to be installed Depends: libreoffice-draw but it is not going to be installed Depends: libreoffice-math but it is not going to be installed Depends: libreoffice-base but it is not going to be installed Depends: libreoffice-filter-mobiledev but it is not going to be installed Depends: libreoffice-java-common (>= 1:3.5.4~) but it is not going to be installed Recommends: libreoffice-gnome but it is not going to be installed or libreoffice-kde but it is not going to be installed E: Unable to correct problems, you have held broken packages.

  Read the article

• No 'Hardware' tab in audio and no profiles

  - by Gene

  If I run the 12.x ubuntu (latest May 2012) from the CD, I get full audio settings, and sound playing in speaker. Profiles let me change analog to digital in/out. Once I run install from the same CD onto the laptop HD, once it boots the first time, after selecting audio settings, there is no 'Hardware' tab and no way to change profiles. Worst part is the audio device is set to SPDIF so nothing comes out of the speakers. Very off how booting off the CD I can get analog audio, and installing to HD and booting seems to limit the profile to something useless. Laptop is a 5 year old Dell D820 with Nvidea 128meg video on a 1920x1200 screen and T7200 CPU. I suspect if I could get the damn HARDWARE tab back in audio settings, I could just select the proper Analog profile - just as is the case if running from a boot CD. Searched the web, no similar problems found... any help appreciated!

  Read the article

• USB Mouse sleeping after 5 seconds when on battery

  - by yurividal

  My usb mouse sleeps after 5 seconds of inactivity when running on battery power. It wakes uo again when i press any button on the mouse. This is really annoying. I have made lsusb, and I noticed my mouse is Bus 001 Device 012: ID 04d9:2083 Holtek Semiconductor, Inc. I have checked my /sys/bus/usb/devices/usb1/power/autosuspend but it is already set to 0, and the directory usb1 has many subdirectories which also have autosuspend files, and i dont know how to edit them. Also, I would like a permanent solution, which would work for any mouse, on any of my 3 usb ports. Any ideas? Using: Ubuntu 12.04 64bit

  Read the article

• Error: no such partition help!

  - by John

  Ok so i had Ubuntu installed on dual boot with windows 7, i decided i liked it, btu i did not want the dual boot option so i decided to uninstall it. no whenever i turn on my computer the "error: no such partition" screen shows up and i cant do anything at all. i tried restarting it and booting from a windows recovery disc to fix the mbr but my bios no wont load i cant change the boot order i cant manually boot or anything, it just goes straight to the "error: no such partition" screen. can someone please help me?

  Read the article

• Intel graphic chipset and NVIDIA Geforce GTX560

  - by antoine

  I have an NVIDIA Geforce GTX560 with two video projectors and I would like to use the onboard Intel Graphic Chipset to plug an additional monitor. I saw the question : How can I use both Intel onboard and Nvidia graphics at the same time? but the answer is so short that I was not convinced. My motherboard (GIGABYTE GA-H61M-D2P-B3 (rev. 1.0)) equipped with Intel H61 Chipset allow shared memory between onboard and PCIe cards. And Windows 7 allow me to use the three outputs thanks to Intel's driver. I'm able to use the onboard graphic card but without graphical interface for now. I think i need intel driver for that. But I would like to know if I can setup my displays in xorg.conf with something like : Section "Device" Identifier "Device0" Driver "intel" EndSection Section "Device" Identifier "Device1" Driver "nvidia" EndSection Section "Device" Identifier "Device2" Driver "nvidia" EndSection Does anyone have successfully setup something like that ? Or should I burn my head experimenting it by myself ? Or is there any good reasons to discouraged me to try ? Thanks for your help. Antoine PS : i'm using Ubuntu 10.10 for now, but I could switch to another version. PS2 : i also read this : Use 3 monitors w/built-in intel adapter + two old nvidia PCI cards on 10.10? which doesn't tell me more about the possibilities to use Intel Graphic and Nvidia at the same time EDIT : according to that : Can not get Dual Monitors to work on Different GPUs, I should be able to run two Xserver one on Intel the other on Nvidia. I will try and post the result here.

  Read the article

• Which is the best method to install/uninstall apps in Ubuntu?

  - by Mujahid

  While apps can be installed with the apt-get command, Synaptic Package Manager or Ubuntu Software Centre, can anybody throw some light on which is the best method? I recently installed kubuntu-desktop and as a result even Ubuntu Software Centre showed that it was installed. When I tried uninstalling it with Ubuntu Software Centre, the package didn't actually uninstall until I used Synaptic once again.

  Read the article

• Can't enable wifi on vaio CW ubuntu 12.04

  - by rastemoh

  I was using my wifi with no problem, but an hour ago I switched it off from system settings and then tried to turn it on again, but no success. it's about 1 month I am using it and I had no problem with WIFI except this one. I rebooted and went to windows 7, but even that OS can't turn it on!! this is rfkill list all: 0: sony-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes 1: sony-bluetooth: Bluetooth Soft blocked: yes Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes

  Read the article

• How can i get my KVM switch to work? (win7 & ubuntu 10.10)

  - by Will W.

  i bought a KVM switch and i'm trying to use it to have it connected to my main PC (win7) and my new machine i just installed ubuntu on. I hooked it up properly, and tried using it. It worked when switching from the win7 machine to the ubuntu one, but after the (1st and only) successful switch, ubuntu just didn't seem to recognize my mouse or keyboard. Basically when i tried it the easiest was to explain what happened was it only worked with Win7. When i switched over to ubuntu by doing a [scroll-lock] [scroll-lock], my keyboard and mouse were not recognized. However, the lights on the keyboard and mouse did work when on ubuntu, but they didn't function, and since keyboard wouldn't function, i couldn't do a [scroll-lock] [scroll-lock] to switch back to the win7 machine. So i was basically locked in to ubuntu with no mouse or keyboard, and i had to unplug the keyboard/mouse usb's and d-sub to plug the monitor d-sub back into win7 computer to type up this thread and google the issue. Seems some people have had this issue before but i couldn't find a fix... I am 80% sure it has to do with drivers... but there isn't any for KVM switches, at least not this one also i never was unable to find ubuntu drivers/firmware for my mouse and keyboard (Logitech G15 and Razer Deathadder 3500). I don't know how to fix this, perhaps someone super-savvy could write/code a script or work-around or something? I really need to get this thing working, my back is getting sore from bending over and plugging in / unplugging usb/monitor/usb/monitor/usb/usb over and over again lol... and i really would be sad if the constant plugging unplugging of the usb's or the d-sub port would over time damage the ports... i don't want that... There has to be some way to get this working.. Can anyone help? The KVM is a IOGEAR GCS632U Win7 x64 Ubuntu 10.10

  Read the article

• How to run applications as root?

  - by ????? ????????

  I am having some strange issue with Kate and Kwrite. When I click on Open File, it crashes with segmentation fault. I am a complete newbie to Linux, and I think the issue is that I am not running the application as root. How do I run applications as root in Ubuntu? Is it bad practice to do this? What is the purpose of the whole root thing, where even though we need to use root so frequently, it is not utilized as default?

  Read the article

• Cant install 12.04.1 or 12.10 in Asus GT75VW laptop

  - by Software companies in perth

  I got this new laptop that comes with a 256 GB ssd drive 128 GB are used for the preinstalled Windows 7 I want to install Ubuntu on the other 128 Gb. I first installed 12.10, it worked and booted once into the OS bu then it started booting onto a black screen so i tried with 12.04.1, i tried installing it a few times with the normal and alternate installer but after saying the installation was OK, it boots onto this distorted graphics screen with a purpelish background where you can't do anything.... What do i do?

  Read the article

• Ubuntu One API Java - how to use REST and AccessToken?

  - by Michael

  I am writing a java app in eclipse that backups data to several consumer-cloud-services encrypted and redundant. So far, I successfully implemented the authentication process, as it is described in the documentation. At this point, I do not know how to proceed. The next step would be implementing the auth with the stored AccessToken and afterwars implementing upload/download/listing functionality through the REST API. I think I have to store the String oauth.getSerialized(). How do I authenticate with this String afterwards? This does not work e.g.: AuthenticateResponse oauth = api.authenticate(serialized); api.setAuthorizer(new OAuthAuthorizer(oauth)); Can someone tell me please, how I can use the REST API with java? There is no explanation or link in the developers area as far as I saw. And btw, I wasted at least one hour trying to fix errors, because some needed libraries are listet after the example code. :/

  Read the article

• How do I configure WakeOnUSB properly?

  - by wishi

  How do I configure Wake-On-USB properly on a 10.04 or 10.10 Ubuntu (2.6.36 and higher if needed)? (Wake-on-USB is when the computer is asleep and for example a USB Keyboard event wakes up the machine!) The notebook is an Acer Aspire Timeline X 1830T. I don't know in which way the Linux Kernel supports the controllers. There are different ways to approach this, for example /proc/acpi/wakeup... or UDEV... or something with HAL? /proc/acpi/wakeup shows every device in S4, but I need S3. Device S-state Status Sysfs node P0P2 S4 *disabled PEGP S4 *disabled P0P1 S0 *disabled pci:0000:00:1e.0 EHC1 S4 *disabled pci:0000:00:1d.0 USB1 S4 *enabled USB2 S4 *disabled USB3 S4 *disabled USB4 S4 *disabled EHC2 S4 *disabled pci:0000:00:1a.0 USB5 S4 *disabled USB6 S4 *disabled USB7 S4 *disabled HDEF S0 *disabled pci:0000:00:1b.0 RP01 S5 *disabled pci:0000:00:1c.0 PXSX S5 *disabled pci:0000:01:00.0 RP02 S0 *disabled pci:0000:00:1c.1 PXSX S5 *disabled pci:0000:02:00.0 RP03 S0 *disabled PXSX S5 *disabled RP04 S0 *disabled PXSX S5 *disabled RP05 S0 *disabled PXSX S5 *disabled RP07 S0 *disabled PXSX S5 *disabled RP08 S0 *disabled PXSX S5 *disabled GLAN S0 *disabled PEG3 S4 *disabled PEG5 S4 *disabled PEG6 S4 *disabled SLPB S3 *enabled S4, which is Suspend-To-Disk afaik... doesn't seem to work either if I echo USB1 into the wakeup table. It just sets an S4 flag. can I get the USB ports in S3? I want to make the machine wakeup from Suspend-To-Ram (S3, ACPI standard) in case a key on my external keyboard is pressed. It only wakes up if a key on the internal Laptop keyboard is pressed... from Suspend To Ram. It seems if I plug in a USB mouse, that the USB port isn't even powered. I have no BIOS option to change this. Further specific information regarding the device: usb-devices T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 13 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04d9 ProdID=1603 Rev=03.10 S: Manufacturer= S: Product=USB Keyboard C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid root@underwater-laptop:/# lsusb [...] Bus 001 Device 013: ID 04d9:1603 Holtek Semiconductor, Inc. Bus 001 Device 004: ID 0bda:0138 Realtek Semiconductor Corp. Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub [...] If this doesn't work I have to properly explain why :( - but I think it is very hard to research this kernel internal. Any hints for good information here? I hope it's possible... I'm just looking for any solution. edit: this, waking up on USB, works on Windows! Thanks a lot, Marius

  Read the article

• How do I change the volume control icon?

  - by Richard Oren Pincook

  I recently switched to gnome 3 (love it!), but the default icon theme was a little dreary and gray, so I switched that back to ubuntu-mono-dark. But now whenever I change my volume, I get this ugly pixelated icon show up. The forum says I don't have enough reputation to post an screenshot, but it's pixelated and ugly with these fuzzy straight blue lines that turn on as the volume goes up. I found identical images in the Humanity and Humanity-Dark icon themes (one example: /usr/share/icons/Humanity/status/24/audio-volume-high.png). I tinkered with the images by changing their names, temporarily deleting them, etc. But it had no effect on the ugly icon. What file is responsible for violating the beauty of my desktop?! Once I find it, I can replace it.

  Read the article

• wine 1.4 regedit makes screen flicker on 12.04 with dual monitor setup

  - by s1lv3r

  I have a dualmonitor setup running dual 23" on 1920x1080 which has the following problem: When running any wine application (for example "wine regedit" from console) the screen flickers and the windows have artifacts like this: Also sometimes taking a screenshot using the print key will make compiz crash (starter and all window bars/menus are gone) when an wine application is started. I don't have the same problems on my notebook which has the same setup. Only difference is the notebook has ATI Graphics and this PC has nvidia. This is the output of lshw -c video: *-display Beschreibung: VGA compatible controller Produkt: G72 [GeForce 7300 LE] Hersteller: NVIDIA Corporation Physische ID: 0 Bus-Informationen: pci@0000:07:00.0 Version: a1 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress vga_controller bus_master cap_list rom Konfiguration: driver=nvidia latency=0 Ressourcen: irq:16 memory:fa000000-faffffff memory:d0000000-dfffffff memory:fb000000-fbffffff memory:fce00000-fce1ffff I also noticed that running xrandr from console makes the screen flicker for some seconds on this PC, which also doesn't happen on my notebook. Removing one screen from the setup will stop the flickering and the artifacts inside the wine applications from appearing. Does anybody have an advice what I could try to change to make this work?

  Read the article

• Failed to start up after upgrading software

  - by Landy

  I asked this question in SuperUser one hour ago, then I know this community so I moved the question here... I've been running Ubuntu 10.10 in a physical x86-64 machine. Today Update Manager reminded me that there are some updates to install and I confirmed the action. I should had read the update list but I didn't. I can only remember there is an update about cups. After the upgrading, Update Manager requires a restart and I confirmed too. But after the restart, the computer can't start up. There are errors in the console. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [xxx]usb 1-8: new high speed USB device using ehci_hcd and address 3 [xxx]usb 2-1: new full speed USB device using ohci_hcd and address 2 [xxx]hub 2-1:1.0: USB hub found [xxx]hub 2-1:1.0: 4 ports detected [xxx]usb 2-1.1: new low speed USB device using ohci_hcd and address 3 Gave up waiting for root device. Common probles: - Boot args (cat /proc/cmdline) - Check rootdelay=(did the system wait long enough) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory ALERT! /dev/sda1 does not exist. Dropping to a shell! BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell(ash) Enter 'help' for a list of built-in commands. (initramfs)[cursor is here] At the moment, I can't input anything in the console. The keyboard doesn't work at all. What's wrong? How can I check boot args or "root=" as suggested? How can I fix this issue? Thanks. =============== PS1: the /dev/sda1 is type ext4 (rw,nosuid,nodev) PS2: the /dev/sda1 can be mounted and accessed successfully under SUSE 11 SP1 x64. PS3: From this link, I think the keyboard doesn't work because the USB driver is not loaded at that time.

  Read the article

• Is it possible to get a Proxy Authentication Dialog with Ubuntu Server?

  - by Johnny Bigoode

  I've got a VM Virtual Box with Ubuntu Server. I'set the http_proxy variable using export http_proxy="http://1234:linux@proxy:8080" The problem is that Ubuntu will constantly try to connect to the internet, even when I'm not logged in my company's account, so everyday I need to reset my password since Ubuntu will constantly try to access the internet. Also, it's always a problem when I need to authenticate the proxy with a different user/password. Can't I just set it to make a small prompt when it tries to connect to the proxy and fails? Like Firefox, Chrome and every app I have installed with Windows 7? I get this small dialog box that asks for a username and password when it can't access the internet. The Ubuntu Server doesn't need constant internet connection, specially since it's only online for tests over LAN.

  Read the article

• Juju bootstrap fails to start network on local environment

  - by Amith KK

  I've followed the instructions at https://juju.ubuntu.com/CharmSchool and rebooted 5 times...... I cant seem to do a juju-bootstrap (local) This is the output: amith@amith-desktop:~$ juju bootstrap 2011-11-24 17:08:05,708 INFO Bootstrapping environment 'local' (type: local)... 2011-11-24 17:08:05,710 INFO Checking for required packages... 2011-11-24 17:08:06,593 INFO Starting networking... error: Failed to start network default error: internal error Child process (dnsmasq --strict-order --bind-interfaces --pid-file=/var/run/libvirt/network/default.pid --conf-file= --except-interface lo --listen-address 192.168.122.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override) status unexpected: exit status 2 Command '['virsh', 'net-start', 'default']' returned non-zero exit status 1 2011-11-24 17:08:07,217 ERROR Command '['virsh', 'net-start', 'default']' returned non-zero exit status 1 Is there any fix at all?

  Read the article

• How do I connect to Ubuntu One after changing the password?

  - by rumtscho

  I changed my password for Ubuntu One using the Web interface, and added a new computer. Since then, the old computer does not synchronize with Ubuntu One. It doesn't show any error messages or such, but files uploaded from the web interface or changed on the newly added computer don't appear/change on the old computer. I guess that it can't connect because it is still using the old password. The problem is that I can't find an interface to change the password the client is using to connect to the service. The "manage account" option opens the Web interface. I looked into the keyring, and found the key for Ubuntu One, but there I only see an encrypted version of the password, so I can't change it there. So what is the correct way to tell my client that my account password has changed? Edit this is what I see when I open Preferences -- Ubuntu One. Is there something wrong with it? It also stubbornly insists that it has successfully synchronized. But the files I have added from other computers are not in my Ubuntu One folder.

  Read the article

• Video player with good subtitle rendering

  - by Oxwivi

  Is there any way to improve the subtitle rendering capabilities of Totem? The subtitles positioning seems to be hard-coded in it and even though the style is user-customizable, it does not confirm to the formatting in subtitle data. In some scenes where writings appear, the subtitles are supposed to appear next to those along with what is being said at that moment. However, on those scenes the translations of text onscreen appears on the default subtitle area with nothing about the things being said. The correct rendering are according to the open-source Windows video player, Media Player Classic - Home Cinema. There are no Linux port as far as I'm aware. If VLC's subtitle support is the same as in Windows, it won't work for me, period. Please suggest anyway to improve subtitle rendering in Totem, other video players, or a way to port MPC-HC.

  Read the article

• How to make openJDK automatically update-alternatives?

  - by cgc512

  Well, I've made a fresh Ubuntu 11.10 install and I installed openJDK 7. It updated alternatives just after installing, so it was all good. Then, I compiled a source and executed it and it didn't worked, then I noticed that java was using the version 1.6, while the javac was 1.7. I thought I had installed it wrong, so I uninstalled it and installed it again. But now, it does not update alternatives automatically (it does it only for javaws). Is there a way to "restart" it so the apt-get does the update-alternatives by itself like the first time? Is it normal that it uses the java 1.6 instead of the java 1.7 when installing openJDK 7? Thank you very much!

  Read the article

• How do I duplicate a server's packages and configuration to another machine?

  - by sharjeel

  I have a production server running Ubuntu. I would like to setup similar configuration installed on my local machine. I'd like to have same packages installed. Since bandwidth is a constraint the traditional disk cloning methods won't work for me. Having same packages installed and same users with same passwords created would be wonderful; i'll tweak rest of the things manually. Is there a good solution to my requirements?

  Read the article

• Ibus incompatible with Tor Browser in 13.10

  - by clueless

  I have recently updated to 13.10 from 13.04 and noticed a compatibility issue between the new Ibus and the Tor Browser. Basically, the Tor Browser does not accept any keyboard inputs, while all other programs do. I tested this with the 64 bit versions 2.3.25-11 and 2.3.25-13 and the 32 bit version 2.3.25-13. According to this thread, quitting ibus "fixes" the problem: https://trac.torproject.org/projects/tor/ticket/9353 Any ideas on how to fix this?

  Read the article

< Previous Page | 387 388 389 390 391 392 393 394 395 396 397 398  | Next Page >