Search Results

Search found 14260 results on 571 pages for 'regex group'.

Page 393/571 | < Previous Page | 389 390 391 392 393 394 395 396 397 398 399 400  | Next Page >

• Are there any benefits to using a Distributed vSwitch for iSCSI?

  - by dunxd

  I am designing our vSphere farm - we'll be migrating from ESX 3.5 to 4.1. I plan to set up a new farm using ESXi 4.1, and move the Virtual Machines on the 3.5 farm into it by shutdown, then import. In ESX 3.5 there is no distributed networking, so each host has a vSwitch connected to my SAN NICs, and a port group for the vmkernel. In vSphere (ESXi 4.1) I have the extra option to set up a distributed vSwitch and distributed port groups for vmkernel to access iSCSI storage. Is there any benefit to this, or should I stick to non-distributed networking for iSCSI.

  Read the article

• SCSI driver installation trouble

  - by Vicky

  I tried to install the driver of Adaptec 39320A-Ultra 320 SCSI card in Win2003 Server R2 SP2 in a DELL PowerEdge 2950 Server. I selected the driver from the list of drivers present in windows. But it says that the device could not be started(Code 10). I tried to put the card in a system that already had the driver installed. It worked fine. So there is no problem with the hardware. I even tried downloading the driver from the manufacturer website. When I try to select install from path and install that driver, it tell no matching driver found. When I install the default driver from windows, it shows the card in SCSI group of device manager, but with an ! symbol. Also the device ID in driver details was different from that of the one present in other system where it insalled fine. Any suggessions to solve it?

  Read the article

• Command to see all Windows commands

  - by open_sourse

  When I type help in windows command line, it lists a whole bunch of commands. However I find that there is a whole set of commands that do not appear in this list, for e.g. many networking commands such as ping, tracert, arp, netstat, net etc. I am sure that there is also a whole bunch of non-networking command which is also not listed. So my question is this. Why are these additional commands not shown in help? Is there a subset/group of commands only that help shows? Is there any command/method to list all the commands that can be executed in windows? (I am not talking about additional .exes that get added to path when some new software is installed..)

  Read the article

• Moving LiveMeeting admin functions to a different window

  - by Rob Farley

  I run a user group, and often host LiveMeeting sessions. I use a projector, with a crowd watching. How do I do the admin stuff (respond to Q&A, etc) on one window, and just have the video on the 'extended monitor'? I dont' want the people in the audience to see anything except the video feed, but I want to be able to watch questions come in, etc... Note: I don't have a problem extending the screen across the two monitors - I already have different stuff showing on my screen compared to the projector. I just want a way to put the LM video on Monitor 2 (projector), and the LM controls on Monitor 1.

  Read the article

• WebSVN accept untrusted HTTPS certificate

  - by Laurent

  I am using websvn with a remote repository. This repository uses https protocol. After having configured websvn I get on the websvn webpage: svn --non-interactive --config-dir /tmp list --xml --username '***' --password '***' 'https://scm.gforge.....' OPTIONS of 'https://scm.gforge.....': Server certificate verification failed: issuer is not trusted I don't know how to indicate to websvn to execute svn command in order to accept and to store the certificate. Does someone knows how to do it? UPDATE: It works! In order to have something which is well organized I have updated the WebSVN config file to relocate the subversion config directory to /etc/subversion which is the default path for debian: $config->setSvnConfigDir('/etc/subversion'); In /etc/subversion/servers I have created a group and associated the certificate to trust: [groups] my_repo = my.repo.url.to.trust [global] ssl-trust-default-ca = true store-plaintext-passwords = no [my_repo] ssl-authority-files = /etc/apache2/ssl/my.repo.url.to.trust.crt

  Read the article

• Unable to edit/delete/move /etc/my.cnf - Permission denied

  - by FlourishDNA

  I am trying to edit /etc/my.cnf as root user via ssh and I get following error while trying to save it I ma making changes to my.cnf as I want to tweak some values in my.cnf to meet Magento requirement like changing key_buffer_size= to higher value (128M). I assigned the value 128M to key_buffer_size= and tried to save it and then got an error. "Error writing /etc/my.cnf: Permission denied" I cant even restart MySQL successfully. [root@flourish ~]# service mysqld restart Stopping mysqld: [ OK ] MySQL Daemon failed to start. Starting mysqld: [FAILED] I can even delete or replace it with the fresh one. I tried uninstalling MySQL and re-installing but nothing worked. Permission -rw-r--r-- and Owner/Group root/root I hope there is some answer to this problem.

  Read the article

• Cannot SSH into Amazon EC2 instance

  - by edelwater

  I read: Cannot connect to ec2 instance http://stackoverflow.com/questions/5635640/cannot-ssh-into-amazon-ec2-instance Amazon EC2 instance ssh problems etc... But could not fix it: suddenly (after a year of service, no changes on my winscp settings) it gives me "network error connection timed out" (im using ec2-user) (also from the amazon console). Log FILE: http://pastebin.com/vNq6YQvN All Sites that run on it run fine port 22 is allowed (never changed it) (security group) using the correct ec2-user and domain via my winscp / putty i can connect to other hosting (via ssh) update: SOLVED. I spend 2 days without looking at my own IP address .... (since it did not change the past 3 years....). Your comments made the spark in my brain. thank you so much. (and only now i find dozens of discussions from angry users that the static addresses from my provider are changed to dynamic ones: http://gathering.tweakers.net/forum/list_messages/1501005/12 ...)

  Read the article

• How do I fix this error? Windows server 2003 the application failed to initialize properly (0xc0000022)

  - by Sharon

  Opening one of the programs from the user desktop I get the above Aplication error. It is a proram stored on the server and then the icon put on the users desktop (this is how I was told to do it) but it does not run the application. I don't know anything about group policies etc and can just about manage to add users in the active directory and that is it. We just have a folder which we drop the program icons into. Any ideas? I must be doing something wrong as it doesn't always show up on their desktop either. What is the simplest way to do this? Thanks

  Read the article

• Terminal Server/Win2K3: Users can't write to their My Documents or Temp folders

  - by Tim Sullivan

  I have a situation where a bunch of users are running our software on a Terminal Services machine on Windows 2003 Server. I've removed most permissions from the User group, but made sure they all have the appropriate permissions for their own application folders, as well as for their Documents and Settings folder. For some reason, even though everything seems to be set up properly, users can't create or delete files from their My Documents, Temp or other D&S folders. Whatever could be going on? I thought this was going to be straightforward, but clearly it's not! :-) Thanks for any help!

  Read the article

• Windows 7 is blocking ports

  - by Caleb1994

  I am trying to open port 80 and 3690 for HTTP and svnserve respectively. I have Windows Firewall off, and have tried temporarily disabling Mcafee VirusScan Enterprise, to no avail. According to http://www.yougetsignal.com/tools/open-ports/, both ports 80 and 3690 are still blocked. I can't think of what would be blocking them if Windows Firewall and my antivirus are disabled. Here is the output of netsh firewall show state Firewall status: ------------------------------------------------------------------- Profile = Standard Operational mode = Disable Exception mode = Enable Multicast/broadcast response mode = Enable Notification mode = Enable Group policy version = Windows Firewall Remote admin mode = Disable Ports currently open on all network interfaces: Port Protocol Version Program ------------------------------------------------------------------- 3690 TCP Any (null) 22 TCP Any (null) 80 TCP Any (null) 1900 UDP Any (null) 2869 TCP Any (null) Any help? I'm not sure what each item on the list of enabled/disabled items is, but "Operational Mode" is disabled, so I assume that one refers to me disabling Windows Firewall. I know that since Windows Firewall is off, this output might not be useful, but I figured I'd include it just in case, haha.

  Read the article

• Windows 7 is blocking ports

  - by Caleb1994

  I am trying to open port 80 and 3690 for HTTP and svnserve respectively. I have Windows Firewall off, and have tried temporarily disabling Mcafee VirusScan Enterprise, to no avail. According to http://www.yougetsignal.com/tools/open-ports/, both ports 80 and 3690 are still blocked. I can't think of what would be blocking them if Windows Firewall and my antivirus are disabled. Here is the output of netsh firewall show state Firewall status: ------------------------------------------------------------------- Profile = Standard Operational mode = Disable Exception mode = Enable Multicast/broadcast response mode = Enable Notification mode = Enable Group policy version = Windows Firewall Remote admin mode = Disable Ports currently open on all network interfaces: Port Protocol Version Program ------------------------------------------------------------------- 3690 TCP Any (null) 22 TCP Any (null) 80 TCP Any (null) 1900 UDP Any (null) 2869 TCP Any (null) Any help? I'm not sure what each item on the list of enabled/disabled items is, but "Operational Mode" is disabled, so I assume that one refers to me disabling Windows Firewall. I know that since Windows Firewall is off, this output might not be useful, but I figured I'd include it just in case, haha.

  Read the article

• `wget` is not recognized or either can't find the file

  - by clankill3r

  if i use cd C:\Program Files (x86)\GnuWin32\bin then i'm able to use wget commands for example: wget http://www.ultralightnews.com/trikes/images/trikes/dfs-singletrike.jpg but i can't find the file back, i looked in c:\ and in the bin folder mentioned above and in GnuWin32\etc If i try wget -O C:\Users\clankill3r\Downloads\wgetfolder wget http://www.ultralightnews.com/trikes/images/trikes/dfs-singletrike.jpg then it says Permision denied, i did allow all permisions possible for every group / user. Some people say it downloads to the current folder your working in (that's why i looked in the bin). But i thought let's try to run the command from another folder so i used: 'cd C:\Users\clankill3r\Downloads\wgetfolderand then the wget comman but then it says thewget` command is not recognized. can someone help?

  Read the article

• How to setup server to accept pem(private RSA key) login w/o password like EC2?

  - by Chandler.Huang

  I am manage a group of VM and I need to setup all vm create a ssh tunnel to a specific host A. One way to do this is append public key of each VM to host's authorized_keys, but I guess I have to do the append each time i create a VM. So I am trying to config host A to accept pem or private key login without passowrd, just like EC2, client can use "ssh -i PEM" to login host A. But I have tried in vain for hours. I create a rsa public/private key and let VM use the private key to login, no matter what I do, host a still ask for password. Is there anything I missed ? Thanks.

  Read the article

• Cisco PIX firewall blocking inbound Exchange email

  - by sumsaricum

  [Cisco PIX, SBS2003] I can telnet server port 25 from inside but not outside, hence all inbound email is blocked. (as an aside, inbox on iPhones do not list/update emails, but calendar works a charm) I'm inexperienced in Cisco PIX and looking for some assistance before mails start bouncing :/ interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 hostname pixfirewall domain-name ciscopix.com fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 no fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 192.168.1.10 SERVER access-list inside_outbound_nat0_acl permit ip 192.168.1.0 255.255.255.0 192.168.1.96 255.255.255.240 access-list outside_cryptomap_dyn_20 permit ip any 192.168.1.96 255.255.255.240 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq 3389 access-list outside_acl permit tcp any interface outside eq ftp access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq https access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq www access-list outside_acl permit tcp any interface outside eq 993 access-list outside_acl permit tcp any interface outside eq imap4 access-list outside_acl permit tcp any interface outside eq 465 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq smtp access-list outside_cryptomap_dyn_40 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANYVPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list COMPANY_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_60 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANY_VPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_80 permit ip any 192.168.1.96 255.255.255.240 pager lines 24 icmp permit host 217.157.xxx.xxx outside mtu outside 1500 mtu inside 1500 ip address outside 213.xxx.xxx.xxx 255.255.255.128 ip address inside 192.168.1.1 255.255.255.0 ip audit info action alarm ip audit attack action alarm ip local pool VPN 192.168.1.100-192.168.1.110 pdm location 0.0.0.0 255.255.255.128 outside pdm location 0.0.0.0 255.255.255.0 inside pdm location 217.yyy.yyy.yyy 255.255.255.255 outside pdm location SERVER 255.255.255.255 inside pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_outbound_nat0_acl nat (inside) 1 0.0.0.0 0.0.0.0 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx 3389 SERVER 3389 netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx smtp SERVER smtp netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx https SERVER https netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx www SERVER www netmask 255.255.255.255 0 0 static (inside,outside) tcp interface imap4 SERVER imap4 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 993 SERVER 993 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 465 SERVER 465 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface ftp SERVER ftp netmask 255.255.255.255 0 0 access-group outside_acl in interface outside route outside 0.0.0.0 0.0.0.0 213.zzz.zzz.zzz timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout sip-disconnect 0:02:00 sip-invite 0:03:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ max-failed-attempts 3 aaa-server TACACS+ deadtime 10 aaa-server RADIUS protocol radius aaa-server RADIUS max-failed-attempts 3 aaa-server RADIUS deadtime 10 aaa-server RADIUS (inside) host SERVER *** timeout 10 aaa-server LOCAL protocol local http server enable http 217.yyy.yyy.yyy 255.255.255.255 outside http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-ipsec crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 40 match address outside_cryptomap_dyn_40 crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 60 match address outside_cryptomap_dyn_60 crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 80 match address outside_cryptomap_dyn_80 crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map client authentication RADIUS LOCAL crypto map outside_map interface outside isakmp enable outside isakmp policy 20 authentication pre-share isakmp policy 20 encryption 3des isakmp policy 20 hash md5 isakmp policy 20 group 2 isakmp policy 20 lifetime 86400 telnet 217.yyy.yyy.yyy 255.255.255.255 outside telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 217.yyy.yyy.yyy 255.255.255.255 outside ssh 0.0.0.0 255.255.255.0 inside ssh timeout 5 management-access inside console timeout 0 dhcpd address 192.168.1.20-192.168.1.40 inside dhcpd dns SERVER 195.184.xxx.xxx dhcpd wins SERVER dhcpd lease 3600 dhcpd ping_timeout 750 dhcpd auto_config outside dhcpd enable inside : end I have Kiwi SysLog running but could use some pointers in that regard to narrow down the torrent of log messages, if that helps?!

  Read the article

• Error in New-MailboxExportRequest - "Couldn't find the Enterprise Organizational Container" even though permissions seem right

  - by tacos_tacos_tacos

  When disabling users I typically will be asked to retain a copy of their mailbox. I accomplish this by literally creating their mailbox in Outlook and then exporting to PST. Is there some way around having to do this just to save a mailbox? Edit: I've tried New-MailboxExportRequest but I keep getting the following after providing an alias: Supply values for the following parameters: FilePath: \\localhost\EXPORT_PST\myuser.pst Mailbox: myuser Couldn't find the Enterprise Organization container. <--- the error I've also tried supplying [email protected] as the mailbox as well. Edit 2: I had already seen the post at http://www.mikepfeiffer.net/2010/10/error-couldnt-find-the-enterprise-organization-container-when-creating-a-new-mailbox-export-request/ so I set the permissions as follows below: NTFS permissions Sharing permissions I am still getting that error. Final Solution In Exchange SP2, it does not warn you that you have not set role assignments, it just fails. So be sure to create a management role for "Mailbox Import Export" and add your user to the group, then restart PowerShell for this to take effect.

  Read the article

• Can we save image slices in sub folders in Photoshop?

  - by bobo

  I am using Photoshop CS5, by default, Photoshop saves image slices in a folder named images. This is fine but there are lots of images, saving them all in a single folder becomes quite messy. What I would like to do in Photoshop is, it allows me to specify which sub-folder a slice should go under the default images folder. For example, a website template PSD file, I would like to save image slices that appear in the header under images\header\. Maybe for the images in the footer, they should go images\footer\. Of course, I can group them manually after the slices are extracted. If possible, I would like to define them in Photoshop, so that every time the image slices are extracted, they each go to the specified sub-folder automatically. Is this possible in Photoshop?

  Read the article

• puppet agent doesn't retrieve files from master

  - by nicmon

  I have a very basic question regarding to Puppet 3.0.1 configuration. I setup a puppet master server (CentOS) with 2 agents (CentOS and Windows 7), all 3 can ping and access each other. There is no error at all. I have copied a file under /etc/puppet/files/test2.txt my site.pp (/etc/puppet/manifests) contains these lines: node default { include test file { "/tmp/testmaster.txt": owner => root, group => root, mode => 644, source => "puppet:///files/test2.txt" } } but there will no file be created on agent servers under /tmp/ once I run "puppet agent --test" here is the output: [root@agent1 ~]# puppet agent --test Info: Retrieving plugin Info: Caching catalog for agent1.mydomain.com Info: Applying configuration version '1354267916' Finished catalog run in 0.02 seconds "puppet apply /etc/puppet/manifests/site.pp" creates the testmaster.txt under /tmp/ on master.

  Read the article

• Animated HTTP request visualisation on Apache

  - by Simon Bennett

  This is more a question to appease my memory in trying to remember what it was I saw a while ago. I remember being introduced to a realtime server visualisation tool that showed the current requests that Apache was handling in a kind of fireworks effect on screen. Each request/group of requests would be shot across the screen in varying colours. I can't for the life for me remember what is was called and hunting around here and Google has left me empty handed. Just wondering if anybody else was able to plug this gem from the memory and ease my pain! Thanks

  Read the article

• FTP Logs in IIS 7.5

  - by Jacob84

  I know this is weird, but the thruth is that I can't find the FTP logs in one IIS 7.5 Server. In the IIS Management Console, I've gone to the server, click on FTP Logging that appears inside FTP group (with other options like FTP Messages and FTP Request filtering). Seems that the configured folder for logs is: C:\InetPubFolder\logs\LogFiles If I go there, I can find a lot of folders with the structure W3SVC#, where # it's a number. They all contain logs, but they are HTTP logs, plenty of GET and POST verbs. Am I missing something? The server contains a lot of domains and It's hard to find.

  Read the article

• WordPress and EverNote integration, any existing solutions?

  - by JXITC

  Actually the tag and category system in WordPress and EverNote are very similar, almost exactly the same. We can create a notebook/notebook group in EverNote, its counterpart in Wordpress is Category/Sub Category We can mutiple tag any note in EverNote, similarly we can tag any post in Wordpress as well! Since the two are so similar to each other in categorizing the article, I am wondering whether there is a existing solution to automatically convert between the two. Like one click to post my EverNote note to WordPress under the same category and same tag. Or pull down my WordPress article to my EverNote account under the same category and same tag. Preferably it can also handle image\video uploading issues as well. :) I saw a similar questions asked years ago: Posting from evernote to wordpress So I was wondering is there any new update for this idea right now?

  Read the article

• Error "iertutil.dll not found" after installing IE8

  - by christianlinnell

  I rolled out IE8 to a group of test users in our organisation overnight, and after logging in in the morning, several of the users reported the error Userinit.exe error and explorer.exe error - iertutil.dll not found After clicking OK, the PC just hangs with the background visible. A few people are reporting this error in various forums, but "do a system restore" is not a good solution. We can easily roll back to IE6 by replacing the DLL, or by uninstalling IE8. We just need a flawless rollout! We're on Windows XP Service Pack 3. Edit: We deploy via SMS. Initially we had 2 machines with the error, but somebody made a mistake with the test package and it rolled out five nights in a row. By the end of the five nights, 4 more machines had developed the same issue.

  Read the article

• PHP fopen fails - does not have permission to open file in write mode.

  - by George

  Hello. I have an Apache 2.17 server running on a Fedora 13. I want to be able to create a file in a directory. I cannot do that. Whenever I try to open a file with php for writing fopen(,'w'), it tells me that I don't have permission to do that. So i checked the httpd.conf file in /etc/httpd/conf/. It says user apache, group apache. So I changed ownership (chown -R apache:apache .*) of my whole /www directory to apache:apache. I also run chmod -R 777 * Apart from knowing how terribly dangerous this is, it actually still gives me the same error, even though I even allow public write!

  Read the article

• OWA no longer accessing 1 backend exchange server

  - by Morchuboo

  We have IIS hosting OWA that is the web frontend to 3 backend exchange servers. Yesterday we got a lot of event 9791 warnings: "Cleanup of the DeliveredTo table for database 'Second Storage Group\Mailbox Store EUROPE 2' was pre-empted because the database engine's version store was growing too large. 0 entries were purged. At this point the server was crawling. Our Mail admin is currently away and not contactable so we rebooted the server. Everything seems ok when reading mail from outlook and evolution-mapi clients but OWA and active-sync connections cannot access. When logging into OWA, users whos mailboxes are not on this backend server are fine but users on this server can log into the OWA frontend but once submitting their credentials the page returns a 503 service unavailable error. We have since rebstarted the affected exchange server and the IIS server as well as iisreset /noforce but problem persists. Can anyone suggest what we should look at...

  Read the article

• sudo suddenly stopped working on debian

  - by chovy

  I've been using 'sudo ' since I setup my server about a week ago. It suddently stopped working with no explanation. I am in 'sudo' group. So there should be no config change required to /etc/sudoers $ sudo apt-get install tsocks [sudo] password for me: me is not in the sudoers file. root@host:/etc# groups me me : me sudo The only thing it could possibly be related to was I added the following line to sshd_config: PermitRootLogin without-password But I have since changed that back to PermitRootLogin yes Permission on file is 400: ls -l /etc/sudoers -r--r----- 1 root root 491 Sep 28 21:52 /etc/sudoers No idea why it stopped working, or how to fix it.

  Read the article

• TheGreenBow VPN with Cisco 2811 config

  - by Fujishiro

  Okay. Im using the feared x64 Win7 retail. I tried soooo many clients/methods, but none of them worked. Finally after a long battle, I made TGB working. YAY! I only have problems with the configuration. What data I've got? group auth user+pw;3DES enc(saw it from the router cfg);user+password. And that's all. I tried using the TGB provided manual and the howtos on their site, but there is no instruction for the given model, and the other cisco type conf wont work.) I tried to configure it up, but its not that easy.. as I mentioned aldy. If anyone uses this app or knows how to configure it up... please..help me.

  Read the article

< Previous Page | 389 390 391 392 393 394 395 396 397 398 399 400  | Next Page >