Search Results

Search found 27649 results on 1106 pages for 'ask how to geek'.

Page 398/1106 | < Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >

• How to access photos from my Genius G-Shot P7545 camera?

  - by Florin

  I have a Genius G-Shot P7545 camera. In Windows I had just to plug in the camera to the usb and acces it like a usb stick. I tried to do that in Ubuntu 10.10 with no result. How can I acces the photots? With these comands I get: lsusb Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 015: ID 0784:1692 Vivitar, Inc. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xcf5acf5a Device Boot Start End Blocks Id System /dev/sda1 * 1 2550 20478976 83 Linux /dev/sda3 2550 19458 135810048 f W95 Ext'd (LBA) /dev/sda5 2550 19458 135809024 83 Linux Unable to read /dev/sdb

  Read the article

• Data Recovery using testDisk failing!

  - by iamcreasy

  I am trying to recover an accidentally formatted partition using testDisk, After selecting the partition[pic 1] and selecting Undeleted[pic 1], it says, No deleted file found.[pic 2] 1 2 I know it's a silly question, but I just want to make sure that those data are really out of reach. Or is there anything I can do to recover them? :( I tried to repair my partition table using bootrec.exe/FixMBR & bootrec.exe/FixBoot, can this be the reason why testdisk can't work anymore? I haven't written anything on that partition. Is there any low level approach to retrieve all the lost data?

  Read the article

• io Exception error in wordcount example

  - by Anitha

  I have installed Hadoop 1.0.3 in Ubuntu 12.04 version (64bit) based on michael-noll.com/tutorials/running-hadoop-on-ubuntu-linux-single-node-cluster/ . I am trying to run a mapreduce job using the wordcount example. Running the command hduser@ubuntu: $/usr/local/hadoop/bin/hadoop jar hadoop-examples-1.0.3.jar wordcount /user/hduser/gutenberg /user/hduser/gutenberg-output gives the following error: Warning: $HADOOP_HOME is deprecated. Exception in thread "main" java.io.IOException: Error opening job jar: hadoop-examples-1.0.3.jar at org.apache.hadoop.util.RunJar.main(RunJar.java:90) Caused by: java.util.zip.ZipException: error in opening zip file at java.util.zip.ZipFile.open(Native Method) at java.util.zip.ZipFile.<init>(ZipFile.java:131) at java.util.jar.JarFile.<init>(JarFile.java:150) at java.util.jar.JarFile.<init>(JarFile.java:87) at org.apache.hadoop.util.RunJar.main(RunJar.java:88) Thanks in advance.

  Read the article

• Order in which passphrase is asked for encrypted volumes

  - by Lars Kotthoff

  I have installed 12.10 on a machine with two disks. The root partition is on one disk, the swap partition on the other. Both disks are encrypted and I have added the corresponding entries to /etc/crypttab. During boot, it asks for the passphrase for the disk with the root filesystem. Then it continues booting and gets to the login screen before I get a chance to enter the passphrase for the other disk. After logging in, I verified that it was actually waiting for me to enter the passphrase for that second partition (askpass process is running). But at that point, I have no way of entering the passphrase anymore. The manpage for crypttab suggests that the order in which the volumes are specified matters, so I changed it to have the swap disk first. I updated the initramfs and grub afterwards, but it didn't make any difference. How can I specify the order in which the encrypted partitions are unlocked? I'm looking for a solution that either asks for the swap passphrase first or tells the system to wait until all encrypted partitions are unlocked before displaying the login screen.

  Read the article

• How can I have the passphrase for a private key remembered for a user?

  - by Jon Cram

  I have a collection of web services running on Ubuntu Server 12.04 that pull code from a github repository. These services run under a specific user (let's call that user 'example'). In /home/example/.ssh/is_rsa is the private key associated with the relevant github account. When performing an operation such as git pull I am greeted with: Enter passphrase for key '/home/simplytestable/.ssh/id_rsa':. Enter the correct password and all is ok. The same private key is present on local development Ubuntu Desktop 12.04 machines and no passphrase is asked for. I'd like to be able to have the passphrase remembered so that upon entering it once it is never asked for again. This will aid in automating various web service updates. I'm guessing that the passphrase needs to be stored in the relevant user's keychain such that I don't have to enter it every time the private key needs to be unlocked. How can I achieve this?

  Read the article

• How do I get write access to ubuntu files from Windows?

  - by Steven

  I'm running Ubuntu 11.10 on my Virtual Machine as a web server. I've mounted the W:/ drive in Win 7 to my /www folder in Ubuntu. I can read the files, but I'm not able to write to the files. In Samba, I have created the following user: <www-data> = "<www-data>" And given guest ok for the www folder: [www] comment = Ubuntu WWW area path = /var/www browsable = yes guest ok = yes read only = no create mask = 0755 ;directory mask = 0775 force user = www-data force group = www-data I've also run sudo chmod -R 755 www to make ensure correct rw access. What am I missing in order to get write access to my ubuntu files from Windows?

  Read the article

• implementation of text editor in shell programming

  - by Arka Ghosh

  i have made a text editor in C. when i am changing the extension of that file from .c to .sh and compiling the file in the terminal,some error is shown,like for the global variables an external error is shown,and for the functions i have declared errors are shown there also.please help me to solve this. I am sending my code.. include include include int i,j,ec,fg,ec2; char fn[20],e,c,d; FILE *fp1,*fp2,fp; void Create(); void Append(); void Delete(); void Display(); int main() { do { printf("\n\t\t** TEXT EDITOR *"); printf("\n\n\tMENU:\n\t..\n "); printf("\n\t1.CREATE\n\t2.DISPLAY\n\t3.APPEND\n\t4.DELETE\n\t5.EXIT\n"); printf("\n\tEnter your choice: "); scanf("%d",&ec); switch(ec) { case 1: Create(); break; case 2: Display(); break; case 3: Append(); break; case 4: Delete(); break; case 5: exit(1); } }while(1); } void Create() { fp1=fopen("temp.txt","w"); printf("\n\tEnter the text and press '.' to save\n\n\t"); while(1) { c=getchar(); fputc(c,fp1); if(c == '.') { fclose(fp1); printf("\n\tEnter then new filename: "); scanf("%s",fn); fp1=fopen("temp.txt","r"); fp2=fopen(fn,"w"); while(!feof(fp1)) { c=getc(fp1); putc(c,fp2); } fclose(fp2); break; }} } void Display() { printf("\n\tEnter the file name: "); scanf("%s",fn); fp1=fopen(fn,"r"); if(fp1==NULL) { printf("\n\tFile not found!"); goto end1; } while(!feof(fp1)) { c=getc(fp1); printf("%c",c); } end1: fclose(fp1); printf("\n\n\tPress any key to continue.."); } void Delete() { printf("\n\tEnter the file name: "); scanf("%s",fn); fp1=fopen(fn,"r"); if(fp1==NULL) { printf("\n\tFile not found!"); goto end2; } fclose(fp1); if(remove(fn)==0) { printf("\n\n\tFile has been deleted successfully!"); goto end2; } else printf("\n\tError!\n"); end2: printf("\n\n\tPress any key to continue.."); getchar(); } void Append() { printf("\n\tEnter the file name: "); scanf("%s",fn); fp1=fopen(fn,"r"); if(fp1==NULL) { printf("\n\tFile not found!"); goto end3; } while(!feof(fp1)) { c=getc(fp1); printf("%c",c); } fclose(fp1); printf("\n\tType the text and press 'Ctrl+s' to append.\n"); fp1=fopen(fn,"a"); while(1) { c=getchar(); if(c==19) goto end3; if(c==13) { d='\n'; fputc(d,fp1); } else { fputc(c,fp1); } } end3: fclose(fp1); }

  Read the article

• How to Easily Share Files Between Nearby Computers

  - by Chris Hoffman

  It’s a common situation — you have several computers near each other and you want to transfer files between them. You don’t have to pull out a USB drive, nor do you have to send them over email — there are faster, easier ways. This is easier than it was in the past, as you don’t have to mess with any complicated Windows networking settings. There are lots of ways to share files, but we’ll cover some of the best.    

  Read the article

• GUI Application Resolution from Text Mode OS

  - by brettw

  I'm trying to turn a computer into a Linux thin client via Ubuntu. I have a Dell OptiPlex 755 loaded with Ubuntu 14.04 installed and fully patched. I've configured the OS to run in text mode and automatically launch the VMWare Horizon's client, which works. The issue is that when the Horizon client launches, its resolution is only 1/4 of the screen. I've played with the resolution settings in grub which appears to modify the text environment but not the application environment for Horizon's. Can someone point me in the right direction on how to increase the resolution for a GUI application launch from text mode so it's full screen. Thanks!

  Read the article

• Ati Radeon HD 5850 + two screens with different resolutions

  - by Nikolas

  How can I use these screens like I would use in Windows? When I turn off "copy" it gives me an error. I have tried community drivers and AMD drivers but both fail at this task. I use Ubuntu 12.04 with latest updates. It did not work in Ubuntu 11.10 either. I use DVI to connect my PC to my monitor and HDMi to my TV. It is a Sony Bravia, bought in 2008. I can't remember the model. Also, this same problem occurs when I connect to two Full HD monitors, both DVI. I cannot turn of the cloning of screens. How do I turn it off? Windows can do that.

  Read the article

• Ubuntu Server and setting up two nic cards

  - by kmalik

  I have ubuntu server on a computer with a wireless and hardwired nic card. The wireless needs to get the internet and pass it to the ubuntu server as well as pass it along to the hardwired nic card to more computers. I am having issues getting the basic set up as I believe the route table is grabbing from the wrong nic card. The router is 192.168.1.0 and the server is set to 192.168.1.11 on the wireless card through DHCP ETH0 (wired nic card) is set up to be 10.10.10.0 and the server is 10.10.10.1) I am not a linux or networking guru but basically I am trying to have internet come from a guest network 192.168.1.0 i believe to give internet to the ubuntu server then the ubuntu server will also A) have the wired nic serve DHCP addresses to other computers via a switch or router (that acts as a switch) via 10.10.10.0 addresses. And I would love if it also passed along internet capabilities as well if possible. Bu really at this point my hope is to at least get the internet working on the server and the DHCP to pass correctly. At the moment the specific issue I am having is getting ubuntu server to connect to the internet and have both nic cards up and running correctly. Any help would be appreciated! The route table is as follows: Destination Gateway GM Flags Metric Iface 0.0.0.0 10.10.10.1 0.0.0.0 UG 100 eth0 10.10.10.0 0.0.0.0 255.255.255.0 U 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 eth0 1992.168.1.0 0.0.0.0 255.255.255.255.0 U 0 eth1 My interfaces is set up as follows: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.10.10.1 netmask 255.255.255.0 network 10.10.10.0 broadcast 10.10.10.255 gateway 10.10.10.1 domain-name-servers 192.168.1.0 auto eth1 iface eth1 inet dhcp netmask 255.255.255.0 gateway 192.168.1.0 wpa-driver wext wpa-ssid "ssid_name" wpa-ap-scan 1 wpa-proto wpa wpa-pairwise ccmp wpa-group ccmp wpa-key-mgmt wpa-psk wpa-psk "HASH" My DHCPD.conf (as there is a domain name server on here is as follows): ddns-update-style none default-lease-time 600 max-lease-time 7200 authoritative option domain-name "Kamron's Network" option subnet-mask 255.255.255.0 option broadcast-address 10.10.10.255 option routers 192.168.1.0 option domain-name-server 192.168.1.0 98.223.128.213 ooption subnet 10.10.10.0 netmask 255.255.255.0 { range 10.10.10.10 10.10.10.99 } log-facility local7

  Read the article

• Ubuntu 14.04 has a bunch of old kernel directories

  - by NoBugs

  I saw in Disk Usage Analyzer I have 3.13.0-xx for 8 minor versions of the kernel in /lib/modules. Each is around 200MB. I remember having to go through in Synaptic and remove those old Linux versions before, but hasn't this bug been fixed? Is it just paranoid default setting, that perhaps all of the last half dozen kernels might become unbootable, so it keeps each old one around? Or do I have some developer setting enabled by accident that causes this?

  Read the article

• How to use American English spelling dictionary in Firefox?

  - by mmr

  My Firefox spellchecker was complaining this morning that I spelled 'neighbor' in the American English style, not the British English style ('neighbour'). Same is true for color (colour), analyze (analyse), etc. I've checked in the edit-preferences-content-language tab, and en-us is selected. I also found this link here: http://ubuntuforums.org/showthread.php?t=1013043 Suggesting that there's some kind of system panel I can use to ensure that I've got the right language, but I can't see where that is (I guess that's for an older Ubuntu that let people get to system settings). So either the dictionary for Firefox for en-us is corrupted, just a copy of the British English dictionary, or somehow the setting isn't propagated properly. How can I get the American dictionary back?

  Read the article

• Can I get the Waves Maxx speaker effects to work in Ubuntu?

  - by Rafael

  I have a new machine that comes with JBL 2.1 Speakers with Waves Maxx Audio 3. On Windows it sounds perfect, though in Ubuntu 12.04 I get cheap/sound with simple mp3 files. I have tried a few things on different blogs but no luck so far. Any ideas? aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: N700 [Logitech Speaker Lapdesk N700], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0

  Read the article

• Click and Drag from Clickpad stops working after a while 12.04

  - by Jason O'Neil

  I've got a Samsung Notebook (NP-QX412-S01AU) with a touchpad / clickpad. I'm running 12.04 Precise. When I first log into my computer, the touchpad behaves exactly as expected and desired. The longer I stay logged in, it slowly degrades. I'll try describe it. There are 3 ways of "dragging" on this clickpad: (Physical) click and hold with one finger, and drag around while still holding it down. All with one finger. (Physical) Click and hold with one finger, then with another finger drag around to move cursor. Double tap (not a physical click) and on the second tap, hold and drag. I most naturally use option 1, but here's how it works: When I first turn on, options 1, 2 and 3 all work. After a while, only options 2 and 3 work. Later still, only option 3 works. Restarting X causes all 3 to work again. I've compared the output of "synclient" in each of the states, and there was no difference. Anybody know what to look at? Or at the very least, a command I can run to "restart" the mouse driver without restarting X?

  Read the article

• What is the easiest (preferably) graphical way to clone a hard drive to an image that I can open later?

  - by Roland Taylor

  I need to make a (preferably) mountable image of an 80GB Hdd, and store it on another hard drive. Is there some way that I can do this without losing data? Thanks for the answers I've received so far. The system in question cannot be used right now due to a problem with the power button :( [ugh!], but the information will really be useful =)! Thanks to all who answered so far, if anyone else wants to give me some tips I'll leave this open for a bit, as I still have not yet been able to clone the drive.

  Read the article

• How can I set my resolution to 1280x1024 on an Acer Aspire Revo 3700?

  - by torbengb

  I've just set up a new nettop computer (Acer Aspire Revo 3700: CPU:Atom D525, GPU:Nvidia ION2). I've just made a clean install of Ubuntu 10.10 using the standard USB pendrive method. Almost everything works OK, but the graphics are not OK: the recommended Nvidia driver is activated but the monitor is not detected, so the resolution is wrong. How can I make Ubuntu detect my monitor? How can I get the proper resolution (1280x1024) in Ubuntu? I know that my monitor is not a CRT but an LCD: it's a BenQ, model T905, with 1280x1024 resolution at 60Hz, connected via a normal VGA cable. DVI or HDMI is not an option. When I go to SystemPrefsMonitors, I get: It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead? YES NO If I say NO then I get a window: or for YES I get this: In both cases I don't see that I can fix this problem. The main reason for getting this new computer was that I was sick of having graphics problems on the old one with a very ugly solution that didn't give me hardware support - but at least I got the resultion. Why is this so difficult... sigh!

  Read the article

• Why are the packages found with apt-get always horribly out of date?

  - by Andrew

  Whenever I use the package manager, it can only ever find really old versions of stuff. Example: sudo apt-get update sudo apt-get install postgresql The best it can do is version 8.4 (3 years out of date). Trying to get a later version, I get: $ sudo apt-get install postgresql-9.1 Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find package postgresql-9.1 I experience the same issue whenever I use the package manager, so I usually just download and build things from source. How can I make it find up-to-date software?

  Read the article

• SAPPHIRE HD 7770 no audio on HDMI TV display

  - by zeroconf

  I have SAPPHIRE HD 7770 and cannot get work audio over HDMI. http://www.sapphiretech.com/presentation/product/?cid=1&gid=3&sgid=1159&lid=1&pid=1452&leg=0 I use Ubuntu 12.04 LTS 64-bit version with all current updates. I tried at /etc/default/grub: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1" ... it didn't help. It's probably I use proprietary driver -this seems to be open source driver. I use the driver, what jockey-gtk (additional drivers) offered me: ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER <---- I installed that one ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER (post-release update) So - I installed the first one, because installing second version failed. Everything went fine but no sound at TV display by HDMI. Even Gnome sound mixer doesn't show HDMI choice. Using 32" Samsung B530 LCD TV - http://www.lcdbesttv.com/2010/02/samsung-b530-series-lcd-tv/ I have Asus P8Z77-M motherboard - http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z77M/ - there is also HDMI integrated. When I put HDMI cord to that plug, then even Gnome sound mixer showed HDMI audio but it didn't work. I have set from BIOS, that I use that SAPPHIRE HD 7770 from PCIe. My lspci output: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 Display controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1c.6 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 683d 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Device aab0 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 09) 04:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03)

  Read the article

• How To Use Windows 8's Gestures on a Laptop Trackpad

  - by Chris Hoffman

  While Windows 8 may seem a bit out of place on hardware without a touch screen, trackpad gestures can help bridge the gap. Gestures on a trackpad work similarly to gestures on a touch screen. Instead of moving the cursor to the corners of the screen, you can swipe the trackpad to reveal hidden menus and pinch your fingers to zoom in and out. Image Credit: Michael Mol on Flickr 7 Ways To Free Up Hard Disk Space On Windows HTG Explains: How System Restore Works in Windows HTG Explains: How Antivirus Software Works

  Read the article

• Read only file system error on ubuntu after partitioning

  - by Ranjith R

  I am not sure if I am the root cause of this problem but this is what I did: I wanted latest ubuntu and latest linux mint together on my thinkpad laptop. Windows 7 was already there. I already had mint. So I put in the USB with ubuntu image and started installing ubuntu. I chose to install side by side. It was taking a long time to finish defragmenting and partitioning. I decided to give up as I became a little impatient and I pressed the skip button. After the skipping, I realized that the partitioning was complete and went ahead with installing ubuntu. Now the linux mint OS starts reporting the file system as read only at least once every day and I have restart and tell the OS to fix errors in hard disk. After I press F key, the system fixes the issues, restarts and all is well again. Is there some way to fix the issue permanently. I think reinstalling will solve the issues, but I can not do it as I have a lot of data and I will have reinstall and configure a lot of softwares that I use daily. I checked the smart check in disk utility and the hard disk seems to be fine Also I checked both the partitions for errors with disk utility and the report says they are fine. Is there something I can do before I reinstall?

  Read the article

• Why is my system freezing when I switch users

  - by ZeroDivide

  Hello I've recently upgraded from 13.04 to 13.10 64bit. I'm running AMD graphics with the proprietary drivers. I have two user accounts. Mine(administrator) and my girlfriend's(standard) My girlfriend clicks "switch user" from my lock screen and logs in fine. I then try to click "switch user" from her lock screen and everything goes black. Then the monitor blinks on and off with just a single cursor. I have no way to access the terminal, the system is unresponsive and I have to hit the power button. Even ctrl + alt + f4 or ctrl + alt + t doesn't get me a terminal. When I press the power button on my system, it does start printing out the shutdown sequence on the monitor. Here is my .xsession-errors Script for ibus started at run_im. Script for auto started at run_im. Script for default started at run_im. Here is hers: init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd respawning too fast, stopped init: logrotate main process (4726) killed by TERM signal init: upstart-dbus-session-bridge main process (4865) terminated with status 1 init: gnome-settings-daemon main process (4843) terminated with status 1 init: gnome-session main process (4852) terminated with status 1 init: unity-panel-service main process (4863) killed by KILL signal I found some advice in a forum to look for at-spi2-registryd in my system logs. Perhaps it will be useful. executing this: sudo grep -r at-spi2-registryd /var/log/* produces this: /var/log/lightdm/x-1-greeter.log:** (at-spi2-registryd:4384): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files /var/log/lightdm/x-1-greeter.log:** (at-spi2-registryd:4384): WARNING **: Unable to register client with session manager /var/log/lightdm/x-2-greeter.log.old:** (at-spi2-registryd:7447): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files /var/log/lightdm/x-2-greeter.log.old:** (at-spi2-registryd:7447): WARNING **: Unable to register client with session manager /var/log/lightdm/x-0-greeter.log:** (at-spi2-registryd:1378): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files /var/log/lightdm/x-0-greeter.log:** (at-spi2-registryd:1378): WARNING **: Unable to register client with session manager /var/log/lightdm/x-0-greeter.log.old:** (at-spi2-registryd:1357): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files /var/log/lightdm/x-0-greeter.log.old:** (at-spi2-registryd:1357): WARNING **: Unable to register client with session manager Any ideas what is going on?

  Read the article

• How do I join a channel on Freenode with Empathy?

  - by sadmicrowave

  I have empathy already installed but am not sure how to configure it to join the channel at http://www.ape-project.org. I do not have a password or login name yet to properly configure the channel with Empathy and when I click "Join our IRC Channel" firefox comes back with an error stating: Firefox doesn't know how to open this address, because the protocol (irc) isn't associated with any program. What can I do to join this (freenode) channel? UPDATE 1 Using Empathy Version 2.23.1 When viewing accounts click "Add..." Protocol: "IRC" Network: "freenode" create new nickname, password, and real name. Then went back to ape-project.org link and click "Join our IRC Channel" again. It brings my Empathy contact list to the foreground but nothing happens...

  Read the article

• How do I make Empathy match my keyring with my password?

  - by lisalisa

  I changed my password a few months ago from the password I first used when I installed Ubuntu on my machine. I tried to add a Google Talk account to Empathy, but every time Empathy gives me a message saying the following: Enter password to unlock your login keyring The password you use to log in to your computer no longer matches that of your login keyring. I do not remember my original password and I'm not sure if I should go to Prefrences Passwords and Keys and delete my login password or if there is a way to change the keyring so that it matches up with my current password.

  Read the article

• File / Application association using a custom command is gone?

  - by Christian Vielma

  In previous Ubuntus when you want to select/change an application to open a specific file (right-click/open with other application or properties) you were able to write a custom command to open the file. This was very useful, but now in 11.10 I can't find this option, it only shows me a list of applications and a button to look for applications in Internet. Is there a way to restore the command line to write custom commands to open files?

  Read the article

< Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >