large directory - Page 402

Ecryptfs: lost passphrase

- by Sherlock3890

When i mounted some dir by mount -t ecryptfs private data i entered wrong password. I wrote data in this dir and now i can't mount it. I have no valid password and passphrase (know only the same), but have SIG in /root/.ecryptfs/sig-cache.txt. How i can recover my directory or, at least, "brute it": type many-many passwords like entered when mounting this dir and compare generated sig with existing?

Read the article

Generate a proper 404 page for blocked sites via /etc/hosts instead of redirect to localhost

- by Mixhael

I have blocked some websites by editing /etc/hosts and adding several newline-entries in the following manner: 0.0.0.0 www.domain.com And it works. The only thing is: when a website is visited which is blocked, the browser is redirected to my http://localhost, resulting in a directory listing or website-presentation that is running within my localhost root-environment. It's not a very big problem, but I prefer a standard error that mentions the website cannot be visited (for instance by a 404 page). Is this possible?

Read the article

Compiling SDL under Windows with sdl-config

- by DarrenVortex

I have downloaded NXEngine (The Open Source version of Cave Story). I have a make file in the directory, which I execute using msys. However, the make file uses sdl-config: g++ -g -O2 -c main.cpp -D DEBUG `sdl-config --cflags` -Wreturn-type -Wformat -Wno-multichar -o main.o /bin/sh: sdl-config: command not found And apparently sdl-config does not exist under windows since there's no sdl installation. There's also no documentation on the official sourceforge website about this! What do I do?

Read the article

Silverlight Cream for April 17, 2010 -- #839

- by Dave Campbell

In this Issue: ITLackey, SilverLaw, Max Paulousky, Alex Yakhnin, Paul Sheriff, Douglas, Jeremy Likness, Tomasz Janczuk, Anoop Madhusudanan, Adam Kinney, and Ashish Shetty. Shoutout: If you haven't already seen it, CrocusGirl did a great job of summarizing Day 2 of DevConnections with her Silverlight 4 Launch Notes From SilverlightCream.com: RIA Services - IIS6 Virtual Directory Deployment ITLackey has a post up building on his previous post on Windows Authentication with RIA Services and discusses deploying to an IIS Virtual Directory. How To: Determine ChildWindow Position At Runtime - Silverlight 3 SilverLaw has a post up about determining the position of a ChildWindow at run-time, for example after the user moves it. Modularity in Silverlight Applications - An Issue With ModuleInitializeException – Part 2 Max Paulousky has part 2 of his series up on Modularity in Silverlight... he discusses using XAML as a catalog and registering modules at runtime, and compares to WPF. Creating LINQ Data Provider for WP7 (Part 1) Alex Yakhnin has a first cut at a LINQ Data Provider for WP7 ... I was expecting this to hit pretty soon, because we're all going to want it... check out the code and d/l the project. Synchronize Data between a Silverlight ListBox and a User Control Paul Sheriff demonstrates databinding in XAML between local data in a ListBox and a UserControl. The beginnings of Silverlight development with Expression Blend Douglas has a good post up on beginning your Silverlight development with Expression Blend. He covers a lot of ground in this post. Converting Silverlight 3 to Silverlight 4 Jeremy Likness has a video up demonstrating converting Silverlight 3 to Silverlight 4 with download links and also using commanding on buttons. Debugging WCF RIA Services with WCF traces Tomasz Janczuk has a post up discussing the use of WCF RIA Services traces to help diagnose and debug problems in a deployed service. Bing Maps + oData + Windows Phone 7 - Nerd Dinner Client For Windows Phone 7 Check out what Anoop Madhusudanan has provided... Nerd Dinner for WP7, including OData and BingMaps... just very cool! A few cool new features added in Expression Blend 4 RC Adam Kinney announced the availability of the new Expression Blend and highlights some of the new features... like MakeLayoutPath... FTW! Of Crashing and Sometimes Burning Ashish Shetty has a discourse posted about where the causes of errors might come from, what to expect from the platform, where to find crash dumps, and links to more reading. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

Upgrading Apache to 2.2.23 on ubuntu 12.04 LTS

- by Salil P

We had done a PCI scan on one of our servers running Ubuntu 12.04 LTS with apache 2.2.22. The scan reported a vulnerability in apache 2.2.22 (Apache HTTP Server Zero-Length Directory Name in LD_LIBRARY_PATH Vulnerability).The report states to upgrade the version to the latest stable release of either 2.2.23 or 2.2.24. How do I upgrade to the 2.2.23 to fix the vulnerability or is there a patch available that can fix this and if yes can you let me know how that can be patched.

Read the article

How to find Microsoft.SharePoint.ApplicationPages.dll and some other assemblies

- by KunaalKapoor

You may be wondering where to find Microsoft.SharePoint.ApplicationPages.dll , if you are creating a new SharePoint application page? But don’t worry, it resides in _app_bin folder of your SharePoint site’s virtual directory.Assuming your IIS inetpub is at C then the exact path of Microsoft.SharePoint.ApplicationPages.dll isC:\Inetpub\wwwroot\wss\VirtualDirectories\<Your Virtual Server>\_app_bin\Microsoft.SharePoint.ApplicationPages.dllHere is the full list of assemblies at _app_bin folder:Microsoft.Office.DocumentManagement.Pages.dllMicrosoft.Office.officialfileSoap.dllMicrosoft.Office.Policy.Pages.dllMicrosoft.Office.SlideLibrarySoap.dllMicrosoft.Office.Workflow.Pages.dllMicrosoft.Office.WorkflowSoap.dllMicrosoft.SharePoint.ApplicationPages.dllSTSSOAP.DLL

Read the article

The DOS DEBUG Environment

- by MarkPearl

Today I thought I would go back in time and have a look at the DEBUG command that has been available since the beginning of dawn in DOS, MS-DOS and Microsoft Windows. up to today I always knew it was there, but had no clue on how to use it so for those that are interested this might be a great geek party trick to pull out when you want the awe the younger generation and want to show them what “real” programming is about. But wait, you will have to do it relatively quickly as it seems like DEBUG was finally dumped from the Windows group in Windows 7. Not to worry, pull out that Windows XP box which will get you even more geek points and you can still poke DEBUG a bit. So, for those that are interested and want to find out a bit about the history of DEBUG read the wiki link here. That all put aside, lets get our hands dirty.. How to Start DEBUG in Windows Make sure your version of Windows supports DEBUG. Open up a console window Make a directory where you want to play with debug – in my instance I called it C221 Enter the directory and type Debug You will get a response with a – as illustrated in the image below… The commands available in DEBUG There are several commands available in DEBUG. The most common ones are A (Assemble) R (Register) T (Trace) G (Go) D (Dump or Display) U (Unassemble) E (Enter) P (Proceed) N (Name) L (Load) W (Write) H (Hexadecimal) I (Input) O (Output) Q (Quit) I am not going to cover all these commands, but what I will do is go through a few of them briefly. A is for Assemble Command (to write code) The A command translates assembly language statements into machine code. It is quite useful for writing small assembly programs. Below I have written a very basic assembly program. The code typed out is as follows mov ax,0015 mov cx,0023 sub cx,ax mov [120],al mov cl,[120]A nop R is for Register (to jump to a point in memory) The r command turns out to be one of the most frequent commands you will use in DEBUG. It allows you to view the contents of registers and to change their values. It can be used with the following combinations… R – Displays the contents of all the registers R f – Displays the flags register R register_name – Displays the contents of a specific register All three methods are illustrated in the image above T is for Trace (To execute a program step by step) The t command allows us to execute the program step by step. Before we can trace the program we need to point back to the beginning of the program. We do this by typing in r ip, which moves us back to memory point 100. We then type trace which executes the first line of code (line 100) (As shown in the image below starting from the red arrow). You can see from the above image that the register AX now contains 0015 as per our instruction mov ax,0015 You can also see that the IP points to line 0103 which has the MOV CX,0023 command If we type t again it will now execute the second line of the program which moves 23 in the cx register. Again, we can see that the line of code was executed and that the CX register now holds the value of 23. What I would like to highlight now is the section underlined in red. These are the status flags. The ones we are going to look at now are 1st (NV), 4th (PL), 5th (NZ) & 8th (NC) NV means no overflow, the alternate would be OV PL means that the sign of the previous arithmetic operation was Plus, the alternate would be NG (Negative) NZ means that the results of the previous arithmetic operation operation was Not Zero, the alternate would be ZR NC means that No final Carry resulted from the previous arithmetic operation. CY means that there was a final Carry. We could now follow this process of entering the t command until the entire program is executed line by line. G is for Go (To execute a program up to a certain line number) So we have looked at executing a program line by line, which is fine if your program is minuscule BUT totally unpractical if we have any decent sized program. A quicker way to run some lines of code is to use the G command. The ‘g’ command executes a program up to a certain specified point. It can be used in connection with the the reset IP command. You would set your initial point and then run the G command with the line you want to end on. P is for Proceed (Similar to trace but slightly more streamlined) Another command similar to trace is the proceed command. All that the p command does is if it is called and it encounters a CALL, INT or LOOP command it terminates the program execution. In the example below I modified our example program to include an int 20 at the end of it as illustrated in the image below… Then when executing the code when I encountered the int 20 command I typed the P command and the program terminated normally (illustrated below). D is for Dump (or for those more polite Display) So, we have all these assembly lines of code, but if you have ever opened up an exe or com file in a text/hex editor, it looks nothing like assembly code. The D command is a way that we can see what our code looks like in memory (or in a hex editor). If we examined the image above, we can see that Debug is storing our assembly code with each instruction following immediately after the previous one. For instance in memory address 110 we have int and 111 we have 20. If we examine the dump of memory we can see at memory point 110 CD is stored and at memory point 111 20 is stored. U is for Unassemble (or Convert Machine code to Assembly Code) So up to now we have gone through a bunch of commands, but probably one of the most useful is the U command. Let’s say we don’t understand machine code so well and so instead we want to see it in its equivalent assembly code. We can type the U command followed by the start memory point, followed by the end memory point and it will show us the assembly code equivalent of the machine code. E is for a bunch of things… The E command can be used for a bunch of things… One example is to enter data or machine code instructions directly into memory. It can also be used to display the contents of memory locations. I am not going to worry to much about it in this post. N / L / W is for Name, Load & Write So we have written out assembly code in debug, and now we want to save it to disk, or write it as a com file or load it. This is where the N, L & W command come in handy. The n command is used to give a name to the executable program file and is pretty simple to use. The w command is a bit trickier. It saves to disk all the memory between point bx and point cx so you need to specify the bx memory address and the cx memory address for it to write your code. Let’s look at an example illustrated below. You do this by calling the r command followed by the either bx or cx. We can then go to the directory where we were working and will see the new file with the name we specified. The L command is relatively simple. You would first specify the name of the file you would like to load using the N command, and then call the L command. Q is for Quit The last command that I am going to write about in this post is the Q command. Simply put, calling the Q command exits DEBUG. Commands we did not Cover Out of the standard DEBUG commands we covered A, T, G, D, U, E, P, R, N, L & W. The ones we did not cover were H, I & O – I might make mention of these in a later post, but for the basics they are not really needed. Some Useful Resources Please note this post is based on the COS2213 handouts for UNISA A Guide to DEBUG - http://mirror.href.com/thestarman/asm/debug/debug.htm#NT

Read the article

how to run conky from terminal?

- by Esmail0022

http://www.unixmen.com/configure-con...t-howto-conky/ in this link there are 11 steps to get conky , i did all of them but the terminal show this message: The program 'conky' can be found in the following packages: * conky-cli * conky-std Try: sudo apt-get install and i try type this but saw this message: ismail@ismail-ASUS:~$ sudo apt-get install conky [sudo] password for ismail: E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable) E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it? Can you help me?

Read the article

Configuring Centralized Database User Management with Database Enterprise User Security, OVD and DSE

- by mark.wilcox

My colleague Olaf Stullich has posted a walk-through complete with screenshots and Viewlets/screencast of configuring OVD to work with DSEE to be the directory for Oracle database Enterprise User Security feature. -- Posted via email from Virtual Identity Dialogue

Read the article

CodePlex Daily Summary for Saturday, March 17, 2012

CodePlex Daily Summary for Saturday, March 17, 2012Popular ReleasesAutoSPEditor: AutoSPEditor Installer: Installs the current version of the AutoSPEditor using ClickOnce. Your application will be updated automatically.Javascript .NET: Javascript .NET v0.6: Upgraded to the latest stable branch of v8 (/tags/3.9.18), and switched to using their scons build system. We no longer include v8 source code as part of this project's source code. Simultaneous multithreaded use of v8 now supported (v8 Isolates), although different contexts may not share objects or call each other. 64-bit .Net 4.0 DLL now included. (Download now includes x86 and x64 for both .Net 3.5 and .Net 4.0.)MyRouter (Virtual WiFi Router): MyRouter 1.0.6: This release should be more stable there were a few bug fixes including the x64 issue as well as an error popping up when MyRouter started this was caused by a NULL valuePulse: Pulse Beta 4: This version is still in development but should include: Logging and error handling have been greatly improved. If you run into an error or Pulse crashes make sure to check the Log folder for a recently modified log file so you can report the details of the issue A bunch of new features for the Wallbase.cc provider. Cleaner separation between inputs, downloading and output. Input and downloading are fairly clean now but outputs are still mixed up in the mix which I'm trying to resolve ...Google Books Downloader for Windows: Google Books Downloader-2.0.0.0.: Google Books DownloaderFinestra Virtual Desktops: 2.5.4501: This is a very minor update release. Please see the information about the 2.5 and 2.5.4500 releases for more information on recent changes. This update did not even have an automatic update triggered for it. Adds error checking and reporting to all threads, not only those with message loopsAcDown????? - Anime&Comic Downloader: AcDown????? v3.9.2: ?? ●AcDown??????????、??、??????，????1M，????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。??????AcPlay?????，??????、????????????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)，?????"?????????"??? ??????????????，??????????： ??"AcDo...ArcGIS Editor for OpenStreetMap: ArcGIS Editor for OSM 2.0 Release Candidate: Your feedback is welcome - and this is your last chance to get your fixes in for this version! Includes installer for both Feature Server extension and Desktop extension, enhanced functionality for the Desktop tools, and enhanced built-in Javascript Editor for the Feature Server component. This release candidate includes fixes to beta 4 that accommodate domain users for setting up the Server Component, and fixes for reporting/uploading references tracked in the revision table. See Code In-P...C.B.R. : Comic Book Reader: CBR 0.6: 20 Issue trackers are closed and a lot of bugs too Localize view is now MVVM and delete is working. Added the unused flag (take care that it goes to true only when displaying screen elements) Backstage - new input/output format choice control for the conversion Backstage - Add display, behaviour and register file type options in the extended options dialog Explorer list view has been transformed to a custom control. New group header, colunms order and size are saved Single insta...Windows Azure Toolkit for Windows 8: Windows Azure Toolkit for Windows 8 Consumer Prv: Windows Azure Toolkit for Windows 8 Consumer Preview - Preview Release v1.2.1Minor updates to setup experience: Check for WebPI before install Dependency Check updated to support the following VS 11 and VS 2010 SKUs Ultimate, Premium, Professional and Express Certs Windows Azure Toolkit for Windows 8 Consumer Preview - Preview Release v1.2.0 Please download this for Windows Azure Toolkit for Windows 8 functionality on Windows 8 Consumer Preview. The core features of the toolkit include:...Facebook Graph Toolkit: Facebook Graph Toolkit 3.0: ships with JSON Toolkit v3.0, offering parse speed up to 10 times of last version supports Facebook's new auth dialog supports new extend access token endpoint new example Page Tab app filter Graph Api connections using dates fixed bugs in Page Tab appsCODE Framework: 4.0.20312.0: This version includes significant improvements in the WPF system (and the WPF MVVM/MVC system). This includes new styles for Metro controls and layouts. Improved color handling. It also includes an improved theme/style swapping engine down to active (open) views. There also are various other enhancements and small fixes throughout the entire framework.ScintillaNET: ScintillaNET 2.4: 3/12/2012 Jacob Slusser Added support for annotations. Issues Fixed with this Release Issue # Title 25012 25012 25018 25018 25023 25023 25014 25014 Visual Studio ALM Quick Reference Guidance: v3 - For Visual Studio 11: RELEASE README Welcome to the BETA release of the Quick Reference Guide preview As this is a BETA release and the quality bar for the final Release has not been achieved, we value your candid feedback and recommend that you do not use or deploy these BETA artifacts in a production environment. Quality-Bar Details Documentation has been reviewed by Visual Studio ALM Rangers Documentation has not been through an independent technical review Documentation ...AvalonDock: AvalonDock 2.0.0345: Welcome to early alpha release of AvalonDock 2.0 I've completely rewritten AvalonDock in order to take full advantage of the MVVM pattern. New version also boost a lot of new features: 1) Deep separation between model and layout. 2) Full WPF binding support thanks to unified logical tree between main docking manager, auto-hide windows and floating windows. 3) Support for Aero semi-maximized windows feature. 4) Support for multiple panes in the same floating windows. For a short list of new f...Windows Azure PowerShell Cmdlets: Windows Azure PowerShell Cmdlets 2.2.2: Changes Added Start Menu Item for Easy Startup Added Link to Getting Started Document Added Ability to Persist Subscription Data to Disk Fixed Get-Deployment to not throw on empty slot Simplified numerous default values for cmdlets Breaking Changes: -SubscriptionName is now mandatory in Set-Subscription. -DefaultStorageAccountName and -DefaultStorageAccountKey parameters were removed from Set-Subscription. Instead, when adding multiple accounts to a subscription, each one needs to be added ...IronPython: 2.7.2.1: On behalf of the IronPython team, I'm happy to announce the final release IronPython 2.7.2. This release includes everything from IronPython 54498 and 62475 as well. Like all IronPython 2.7-series releases, .NET 4 is required to install it. Installing this release will replace any existing IronPython 2.7-series installation. Unlike previous releases, the assemblies for all supported platforms are included in the installer as well as the zip package, in the "Platforms" directory. IronPython 2...Kooboo CMS: Kooboo CMS 3.2.0.0: Breaking changes: When upgrade from previous versions, MUST reset the all the content type templates, otherwise the content manager might get a compile error. New features Integrate with Windows azure. See: http://wiki.kooboo.com/?wiki=Kooboo CMS on Azure Complete solution to deploy on load balance servers. See: http://wiki.kooboo.com/?wiki=Kooboo CMS load balance Update Jquery and Jquery ui to the lastest version(Jquery 1.71, Jquery UI 1.8.16). Tree style text content editing. See:h...Extensions for Reactive Extensions (Rxx): Rxx 1.3: Please read the latest release notes for details about what's new. Related Work Items Content SummaryRxx provides the following features. See the Documentation for details. Many IObservable<T> extension methods and IEnumerable<T> extension methods. Many wrappers that convert asynchronous Framework Class Library APIs into observables. Many useful types such as ListSubject<T>, DictionarySubject<T>, CommandSubject, ViewModel, ObservableDynamicObject, Either<TLeft, TRight>, Maybe<T>, Scala...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.47: Properly output escaped characters in CSS identifiers throw an EOF error when parsing a CSS selector that doesn't end in a declaration block chased down a stack-overflow issue with really large JS sources. Needed to flatten out the AST tree for adjacent expression statements that the application merges into a single expression statement, or that already contain large, comma-separated expressions in the original source. fix issue #17569: tie together the -debug switch with the DEBUG defi...New ProjectsCOBOL Bubble Sort: The famous Bubble Sort algorithm using COBOLCross Site Media Dashboard (webpart) for SharePoint video content: View video content in easy to configure dashboard structure. Supports a vast range of video formatsDataObjects.Net Samples: DataObjects.Net SamplesDev Tracking Tool: Dev Tracking Tool is thought to help software developers keeping track of their activities in a fast way, and use these informations for later update of tasks in other informatic systems (i.e.: tracking tasks in TFS and/or other tracking tools).Governance Checklist - Create/manage your Governance Checklist: Governance Checklist - Create/manage your Governance Checklist. SharePoint Governance Checklist generated as a starting point however you can update to your own criteria. Visual Guages to show the status of your governance progresslibspotify.NET - a managed interop library for libspotify: libspotify.NET is a simple interop wrapper library for libspotify written in C#. It enables .NET developers to write applications that can browse, search, and stream digital music from the Spotify platform. This project is compatible with libspotify API version 10.1.16. Requires libspotify.dll, a Spotify premium account, and an application API key. More info on the libspotify API at http://developer.spotify.com/en/libspotify/overview/ Media.Net: All-In-One Media Player for Windows XP, Vista, Windows 7 and Windows 8.MisTutoriales: MisTutoriales Ejemplos de programación.mobile video: mobile videoMugen MVVM Toolkit: Mugen MVVM Toolkit makes it easier to develop Silverlight, WPF and WP7 applications using the Model-View-ViewModel design pattern. It is very easy to use. It combines the pattern of DI (dependency injection) and MVVM (Model-View-ViewModel).Project SIMPLE Orca: SIMPLE makes it easier for non-programmers to create simple applications. You'll no longer have to learn an entire language in order to create that simple application you've been stressing over. S imple And I deal M acroed P rogramming L anguage For E aseRelational data Transfer Application: Relational data Transfer Application helps to move data scenarios from One relational database to other Relational database without moving entire tables. Basically this applciation moves a given data row along with its relational data to destination database. rGUI: rGUI is an open source .NET front-end for Robocopy written in C#. It is designed for users already familiar with the Robocopy command-line switches and what they do, but who want the command parameters presented in a visual way.S#: Spontaneous Sharp: A mix of very easy to use c# libraries, born out of spontaneous needs to simplify a large number of programming tasks in .NET C#.SDF - Smart Document Framework: Smart Document Framework offers an alternative to the FlowDocument which provides a simpler rendering engine and allows for better pagination.Shatong: Shatong SystemSPD 2007 Custom Activity Pause Until CheckOut = None: This activity can be added to the beginning of a SharePoint Designer 2007 workflow to pause the workflow until the item is no longer checked out (soft or hard checkout)Spontaneous XNA Library (SXL): Yet another XNA Library that has arisen from various spontaneous needs. Hopefully it can be as helpful to others as it has been to me.TeaFiles.Net - time series storage: TeaFiles.Net is an API for TeaFiles that makes it easy to store and exchange time series data between .Net programs and C++, Python, R and other applications. Written in C#. Find more details about the file specification, other APIs and tools at discretelogics.comTypePipe: TypePipe allows you to modify existing CLR types using a simple, expression-based API. Modifications from several tools and libraries (AOP, IoC etc.) can be combined. Types are generated via Reflection.Emit or user-defined back-ends.UCB_12_1: This is a research projectUCB_12_2: UCB_12_2UCB_12_3: UCB_12_3UCB_12_4: UCB_12_4UCB_12_Common: UCB_12_CommonVG Task Manager: task manager demo project created by Vivek Gupta.WP7 Map Control: Lightweight universal map control for Windows Phone 7xRM#: xRM# is focused on boosting productivity while developing JavaScript customizations for Microsoft Dynamics CRM 2011. xRM# provided a platform to scribble code in C# and translating them to JavaScript snippet for xRM customizations. Developers can benefit from structural and coherent flow of using existing C# coding guidelines. Pseudo data types, IntelliSense and Code Documentation reduce code look-ups and increase productivity. xRM# also supports deploying generated scripts as minified ver...

Read the article

How to restore .bashrc

- by Miranda Webb

Terminal shows this bash: /home/atlas/.bashrc: line 73: syntax error near unexpected token `[' bash: /home/atlas/.bashrc: line 73: `if [ -x /usr/bin/dircolors ] ; then ' I've tried to fix it using "cp /ect/skel/.bashrc ~/" And I get this "cp: cannot stat `/ect/skel/.bashrc': No such file or directory" I'm unsure of why this is doing this and how to fix it. I had previously been in the bashrc file messing around and apparently I've messed something up. All I want to do is restore the bashrc file to factory settings.

Read the article

how to set environment variable in eric IDE

- by ng0323

I have no problem running a python script from the terminal, but in eric IDE, I am getting this error: ImportError libcudart.so.6.0: cannot open shared object file: No such file or directory Perhaps it's an enviroment variable that needs to be set. In eric, when I run script, I filled in the environment option as follows. I tried set PATH = usr/local/cuda-6.0/bin or PATH = /usr/local/cuda-6.0/bin or just /usr/local/cuda-6.0/bin and they all didn't work.

Read the article

How backup and restore Horde manualy

- by Thomas

how can I backup and restore my horde sql database The Databse ist located in /var/lib/mysql/horde There are many *.frm files and one db.opt My Server ist broken, so I want to reinstall it. Can i copy this files to a USB Stick, then restore the entire server without horde and then simply copy the files in the same directory? Or habe I do something like "mysqldump" to delete an reinztall the database? Thank you, Thomas

Read the article

Eclipse Crashes on Ubuntu 11.10

- by Adrian Matteo

I'm using Eclipse Indigo with aptana, to develope a rails application and it was working fine, but now it keeps crashing on startup. It opens and when the loading bars appear on the status bar, it goes gray (not responding) and the in closes without an error. Here is the output from the terminal when I ran it from there: (Eclipse:7391): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (Eclipse:7391): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (Eclipse:7391): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (Eclipse:7391): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", 2012-05-27 16:05:58.272::INFO: Logging to STDERR via org.mortbay.log.StdErrLog 2012-05-27 16:06:00.586::INFO: jetty-6.1.11 2012-05-27 16:06:00.743::INFO: Started [email protected]:8500 2012-05-27 16:06:00.744::INFO: Started [email protected]:8600 2012-05-27 16:06:01.999::INFO: jetty-6.1.11 2012-05-27 16:06:01.029::INFO: Opened /tmp/jetty_preview_server.log 2012-05-27 16:06:01.046::INFO: Started [email protected]:8000 2012-05-27 16:06:01.071::INFO: jetty-6.1.11 2012-05-27 16:06:01.016::INFO: Started [email protected]:8300 ** (Eclipse:7391): DEBUG: NP_Initialize ** (Eclipse:7391): DEBUG: NP_Initialize succeeded No bp log location saved, using default. [000:000] Browser XEmbed support present: 1 [000:000] Browser toolkit is Gtk2. [000:001] Using Gtk2 toolkit ERROR: Invalid browser function table. Some functionality may be restricted. [000:056] Warning(optionsfile.cc:47): Load: Could not open file, err=2 [000:056] No bp log location saved, using default. [000:056] Browser XEmbed support present: 1 [000:056] Browser toolkit is Gtk2. [000:056] Using Gtk2 toolkit ** (Eclipse:7391): DEBUG: NP_Initialize ** (Eclipse:7391): DEBUG: NP_Initialize succeeded ** (Eclipse:7391): DEBUG: NP_Initialize ** (Eclipse:7391): DEBUG: NP_Initialize succeeded ** (Eclipse:7391): DEBUG: NP_Initialize ** (Eclipse:7391): DEBUG: NP_Initialize succeeded java version "1.6.0_23" OpenJDK Runtime Environment (IcedTea6 1.11pre) (6b23~pre11-0ubuntu1.11.10.2) OpenJDK 64-Bit Server VM (build 20.0-b11, mixed mode) java.io.FileNotFoundException: /home/amatteo/.eclipse/org.eclipse.platform_3.7.0_155965261/configuration/portal.1.2.7.024747/aptana/favicon.ico (No such file or directory) at java.io.FileInputStream.open(Native Method) at java.io.FileInputStream.<init>(FileInputStream.java:120) at com.aptana.ide.server.jetty.ResourceBaseServlet.doGet(ResourceBaseServlet.java:136) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:487) at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:362) at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181) at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:729) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152) at org.mortbay.jetty.Server.handle(Server.java:324) at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:505) at org.mortbay.jetty.HttpConnection$RequestHandler.headerComplete(HttpConnection.java:829) at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:513) at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:211) at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:380) at org.mortbay.jetty.bio.SocketConnector$Connection.run(SocketConnector.java:228) at org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:488) 2012-05-27 16:06:03.277::WARN: /favicon.ico: java.io.IOException: /home/amatteo/.eclipse/org.eclipse.platform_3.7.0_155965261/configuration/portal.1.2.7.024747/aptana/favicon.ico (No such file or directory) It was working perfectly till a few days ago!

Read the article

unstripped binary or object creating debian package

- by Jaime

I'm new to package creation and I'm trying to create a .deb package and keep getting 'unstripped-binary-or-object' on all my libraries and executables. I have everything setup in the directory tree where I want them to end up (and a DEBIAN folder with the control file) and then do fakeroot dpkg-deb --build ./mypackage when I lint with lintian mypackage.deb I get that error. Any ideas or suggestions? Thanks

Read the article

Creating an SMF service for mercurial web server

- by Chris W Beal

I'm working on a project at the moment, which has a number of contributers. We're managing the project gate (which is stand alone) with mercurial. We want to have an easy way of seeing the changelog, so we can show management what is going on. Luckily mercurial provides a basic web server which allows you to see the changes, and drill in to change sets. This can be run as a daemon, but as it was running on our build server, every time it was rebooted, someone needed to remember to start the process again. This is of course a classic usage of SMF. Now I'm not an experienced person at writing SMF services, so it took me 1/2 an hour or so to figure it out the first time. But going forward I should know what I'm doing a bit better. I did reference this doc extensively. Taking a step back, the command to start the mercurial web server is $ hg serve -p <port number> -d So we somehow need to get SMF to run that command for us. In the simplest form, SMF services are really made up of two components. The manifest Usually lives in /var/svc/manifest somewhere Can be imported from any location The method Usually live in /lib/svc/method I simply put the script straight in that directory. Not very repeatable, but it worked Can take an argument of start, stop, or refresh Lets start with the manifest. This looks pretty complex, but all it's doing is describing the service name, the dependencies, the start and stop methods, and some properties. The properties can be by instance, that is to say I could have multiple hg serve processes handling different mercurial projects, on different ports simultaneously Here is the manifest I wrote. I stole extensively from the examples in the Documentation. So my manifest looks like this $ cat hg-serve.xml <?xml version="1.0"?> <!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1"> <service_bundle type='manifest' name='hg-serve'> <service name='application/network/hg-serve' type='service' version='1'> <dependency name='network' grouping='require_all' restart_on='none' type='service'> <service_fmri value='svc:/milestone/network:default' /> </dependency> <exec_method type='method' name='start' exec='/lib/svc/method/hg-serve %m' timeout_seconds='2' /> <exec_method type='method' name='stop' exec=':kill' timeout_seconds='2'> </exec_method> <instance name='project-gate' enabled='true'> <method_context> <method_credential user='root' group='root' /> </method_context> <property_group name='hg-serve' type='application'> <propval name='path' type='astring' value='/src/project-gate'/> <propval name='port' type='astring' value='9998' /> </property_group> </instance> <stability value='Evolving' /> <template> <common_name> <loctext xml:lang='C'>hg-serve</loctext> </common_name> <documentation> <manpage title='hg' section='1' /> </documentation> </template> </service> </service_bundle> So the only things I had to decide on in this are the service name "application/network/hg-serve" the start and stop methods (more of which later) and the properties. This is the information I need to pass to the start method script. In my case the port I want to start the web server on "9998", and the path to the source gate "/src/project-gate". These can be read in to the start method. So now lets look at the method scripts $ cat /lib/svc/method/hg-serve #!/sbin/sh # # # Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved. # # Standard prolog # . /lib/svc/share/smf_include.sh if [ -z $SMF_FMRI ]; then echo "SMF framework variables are not initialized." exit $SMF_EXIT_ERR fi # # Build the command line flags # # Get the port and directory from the SMF properties port=`svcprop -c -p hg-serve/port $SMF_FMRI` dir=`svcprop -c -p hg-serve/path $SMF_FMRI` echo "$1" case "$1" in 'start') cd $dir /usr/bin/hg serve -d -p $port ;; *) echo "Usage: $0 {start|refresh|stop}" exit 1 ;; esac exit $SMF_EXIT_OK This is all pretty self explanatory, we read the port and directory using svcprop, and use those simply to run a command in the start case. We don't need to implement a stop case, as the manifest says to use "exec=':kill'for the stop method. Now all we need to do is import the manifest and start the service, but first verify the manifest # svccfg verify /path/to/hg-serve.xml If that doesn't give an error try importing it # svccfg import /path/to/hg-serve.xml If like me you originally put the hg-serve.xml file in /var/svc/manifest somewhere you'll get an error and told to restart the import service svccfg: Restarting svc:/system/manifest-import The manifest being imported is from a standard location and should be imported with the command : svcadm restart svc:/system/manifest-import # svcadm restart svc:/system/manifest-import and you're nearly done. You can look at the service using svcs -l # svcs -l hg-serve fmri svc:/application/network/hg-serve:project-gate name hg-serve enabled false state disabled next_state none state_time Thu May 31 16:11:47 2012 logfile /var/svc/log/application-network-hg-serve:project-gate.log restarter svc:/system/svc/restarter:default contract_id 15749 manifest /var/svc/manifest/network/hg/hg-serve.xml dependency require_all/none svc:/milestone/network:default (online) And look at the interesting properties # svcprop hg-serve hg-serve/path astring /src/project-gate hg-serve/port astring 9998 ...stuff deleted.... Then simply enable the service and if every things gone right, you can point your browser at http://server:9998 and get a nice graphical log of project activity. # svcadm enable hg-serve # svcs -l hg-serve fmri svc:/application/network/hg-serve:project-gate name hg-serve enabled true state online next_state none state_time Thu May 31 16:18:11 2012 logfile /var/svc/log/application-network-hg-serve:project-gate.log restarter svc:/system/svc/restarter:default contract_id 15858 manifest /var/svc/manifest/network/hg/hg-serve.xml dependency require_all/none svc:/milestone/network:default (online) None of this is rocket science, but a bit fiddly. Hence I thought I'd blog it. It might just be you see this in google and it clicks with you more than one of the many other blogs or how tos about it. Plus I can always refer back to it myself in 3 weeks, when I want to add another project to the server, and I've forgotten how to do it.

Read the article

Problem booting Windows after failed installation Ubuntu 12.04 alongside Windows 7

- by Tassos

I tried to install in my laptop Ubuntu 12.04 so that I can dual-boot with Windows 7. I made some mistakes during this process and I didn't manage to install Ubuntu. But my real problem now is that I'm afraid that I also destroyed the installation of Windows 7. Your help would be precious for me. Here are the details of what I did: 1) I followed these instructions to dual boot Ubuntu 12.04 and Windows 7: http://www.linuxbsdos.com/2012/05/17/how-to-dual-boot-ubuntu-12-04-and-windows-7/ The only difference from what is described above, is that in my case the device names where: /dev/mapper/isw_fdjdhbadc_Volume0* instead of: /dev/sda* Note that I had created a bootable USB stick to do that. 2) The installation proceeded normally, but in the end I got a fatal error because the grub-install failed. 3) Then, after googling this problem, I runned ubuntu from the USB stick and run this command: sudo grub-install --root-directory=/home/ubuntu/temp /dev/mapper/isw_fdjdhbadc_Volume0p5 (/isw_fdjdhbadc_Volume0p5 was the partition that I had made for /boot) but this command also failed. 4) Then, I did something stupid (I think): I run the above command as: sudo grub-install --root-directory=/home/ubuntu/temp /dev/mapper/isw_fdjdhbadc_Volume0 namely I tried to install grub in the device isw_fdjdhbadc_Volume0 instead of the boot partition isw_fdjdhbadc_Volume0p5 The above command did not fail and was executed ok. 5) After that, I tried to boot my laptop, but it seemed that I had no operation system. Not even windows were detected. 6) I thought that I should uninstall grub from isw_fdjdhbadc_Volume0. So following some online instructions that I found, I booted again Ubuntu from the USB stick and run the following command (this was stupid since the instructions were for a totally different case than mine): sudo dd if=/dev/zero of=/dev/mapper/isw_fdjdhbadc_Volume0 bs=446 count=1 Afte that, I was still unable to boot Windows. I realize that I deleted something that I shouldn't, but I'm hope that this is not crucial and I can recover somehow. When I boot Ubuntu from the USB, I can see that the partition with Windows is still there, with all the directories, Windows files, my data etc. So, my question is: Is there a way to undo the mistakes that I desribed above and recover Windows 7? This is my major question. After solving that, I'd also like to know what I did wrong with the installation of Ubuntu. Thanks in advance for you valuable help!

Read the article

Where can I find luxury goods advertisements for my website?

- by Nazariy

I'm running business directory for tourist attractions, and I would like to fill some empty blocks with useful advertisements like flight operators, car retailers, luxury goods etc. We have tried Google AdSense but it's full of cheap, pointless and irrelevant advertisement that would make our website look cheap and bad. So I'm curious is there any centralised resources for luxury goods and services?

Read the article

Improving Manageability of Virtual Environments

- by Jeff Victor

Boot Environments for Solaris 10 Branded Zones Until recently, Solaris 10 Branded Zones on Solaris 11 suffered one notable regression: Live Upgrade did not work. The individual packaging and patching tools work correctly, but the ability to upgrade Solaris while the production workload continued running did not exist. A recent Solaris 11 SRU (Solaris 11.1 SRU 6.4) restored most of that functionality, although with a slightly different concept, different commands, and without all of the feature details. This new method gives you the ability to create and manage multiple boot environments (BEs) for a Solaris 10 Branded Zone, and modify the active or any inactive BE, and to do so while the production workload continues to run. Background In case you are new to Solaris: Solaris includes a set of features that enables you to create a bootable Solaris image, called a Boot Environment (BE). This newly created image can be modified while the original BE is still running your workload(s). There are many benefits, including improved uptime and the ability to reboot into (or downgrade to) an older BE if a newer one has a problem. In Solaris 10 this set of features was named Live Upgrade. Solaris 11 applies the same basic concepts to the new packaging system (IPS) but there isn't a specific name for the feature set. The features are simply part of IPS. Solaris 11 Boot Environments are not discussed in this blog entry. Although a Solaris 10 system can have multiple BEs, until recently a Solaris 10 Branded Zone (BZ) in a Solaris 11 system did not have this ability. This limitation was addressed recently, and that enhancement is the subject of this blog entry. This new implementation uses two concepts. The first is the use of a ZFS clone for each BE. This makes it very easy to create a BE, or many BEs. This is a distinct advantage over the Live Upgrade feature set in Solaris 10, which had a practical limitation of two BEs on a system, when using UFS. The second new concept is a very simple mechanism to indicate the BE that should be booted: a ZFS property. The new ZFS property is named com.oracle.zones.solaris10:activebe (isn't that creative? ). It's important to note that the property is inherited from the original BE's file system to any BEs you create. In other words, all BEs in one zone have the same value for that property. When the (Solaris 11) global zone boots the Solaris 10 BZ, it boots the BE that has the name that is stored in the activebe property. Here is a quick summary of the actions you can use to manage these BEs: To create a BE: Create a ZFS clone of the zone's root dataset To activate a BE: Set the ZFS property of the root dataset to indicate the BE To add a package or patch to an inactive BE: Mount the inactive BE Add packages or patches to it Unmount the inactive BE To list the available BEs: Use the "zfs list" command. To destroy a BE: Use the "zfs destroy" command. Preparation Before you can use the new features, you will need a Solaris 10 BZ on a Solaris 11 system. You can use these three steps - on a real Solaris 11.1 server or in a VirtualBox guest running Solaris 11.1 - to create a Solaris 10 BZ. The Solaris 11.1 environment must be at SRU 6.4 or newer. Create a flash archive on the Solaris 10 system s10# flarcreate -n s10-system /net/zones/archives/s10-system.flar Configure the Solaris 10 BZ on the Solaris 11 system s11# zonecfg -z s10z Use 'create' to begin configuring a new zone. zonecfg:s10z create -t SYSsolaris10 zonecfg:s10z set zonepath=/zones/s10z zonecfg:s10z exit s11# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - s10z configured /zones/s10z solaris10 excl Install the zone from the flash archive s11# zoneadm -z s10z install -a /net/zones/archives/s10-system.flar -p You can find more information about the migration of Solaris 10 environments to Solaris 10 Branded Zones in the documentation. The rest of this blog entry demonstrates the commands you can use to accomplish the aforementioned actions related to BEs. New features in action Note that the demonstration of the commands occurs in the Solaris 10 BZ, as indicated by the shell prompt "s10z# ". Many of these commands can be performed in the global zone instead, if you prefer. If you perform them in the global zone, you must change the ZFS file system names. Create The only complicated action is the creation of a BE. In the Solaris 10 BZ, create a new "boot environment" - a ZFS clone. You can assign any name to the final portion of the clone's name, as long as it meets the requirements for a ZFS file system name. s10z# zfs snapshot rpool/ROOT/zbe-0@snap s10z# zfs clone -o mountpoint=/ -o canmount=noauto rpool/ROOT/zbe-0@snap rpool/ROOT/newBE cannot mount 'rpool/ROOT/newBE' on '/': directory is not empty filesystem successfully created, but not mounted You can safely ignore that message: we already know that / is not empty! We have merely told ZFS that the default mountpoint for the clone is the root directory. List the available BEs and active BE Because each BE is represented by a clone of the rpool/ROOT dataset, listing the BEs is as simple as listing the clones. s10z# zfs list -r rpool/ROOT NAME USED AVAIL REFER MOUNTPOINT rpool/ROOT 3.55G 42.9G 31K legacy rpool/ROOT/zbe-0 1K 42.9G 3.55G / rpool/ROOT/newBE 3.55G 42.9G 3.55G / The output shows that two BEs exist. Their names are "zbe-0" and "newBE". You can tell Solaris that one particular BE should be used when the zone next boots by using a ZFS property. Its name is com.oracle.zones.solaris10:activebe. The value of that property is the name of the clone that contains the BE that should be booted. s10z# zfs get com.oracle.zones.solaris10:activebe rpool/ROOT NAME PROPERTY VALUE SOURCE rpool/ROOT com.oracle.zones.solaris10:activebe zbe-0 local Change the active BE When you want to change the BE that will be booted next time, you can just change the activebe property on the rpool/ROOT dataset. s10z# zfs get com.oracle.zones.solaris10:activebe rpool/ROOT NAME PROPERTY VALUE SOURCE rpool/ROOT com.oracle.zones.solaris10:activebe zbe-0 local s10z# zfs set com.oracle.zones.solaris10:activebe=newBE rpool/ROOT s10z# zfs get com.oracle.zones.solaris10:activebe rpool/ROOT NAME PROPERTY VALUE SOURCE rpool/ROOT com.oracle.zones.solaris10:activebe newBE local s10z# shutdown -y -g0 -i6 After the zone has rebooted: s10z# zfs get com.oracle.zones.solaris10:activebe rpool/ROOT rpool/ROOT com.oracle.zones.solaris10:activebe newBE local s10z# zfs mount rpool/ROOT/newBE / rpool/export /export rpool/export/home /export/home rpool /rpool Mount the original BE to see that it's still there. s10z# zfs mount -o mountpoint=/mnt rpool/ROOT/zbe-0 s10z# ls /mnt Desktop export platform Documents export.backup.20130607T214951Z proc S10Flar home rpool TT_DB kernel sbin bin lib system boot lost+found tmp cdrom mnt usr dev net var etc opt Patch an inactive BE At this point, you can modify the original BE. If you would prefer to modify the new BE, you can restore the original value to the activebe property and reboot, and then mount the new BE to /mnt (or another empty directory) and modify it. Let's mount the original BE so we can modify it. (The first command is only needed if you haven't already mounted that BE.) s10z# zfs mount -o mountpoint=/mnt rpool/ROOT/zbe-0 s10z# patchadd -R /mnt -M /var/sadm/spool 104945-02 Note that the typical usage will be: Create a BE Mount the new (inactive) BE Use the package and patch tools to update the new BE Unmount the new BE Reboot Delete an inactive BE ZFS clones are children of their parent file systems. In order to destroy the parent, you must first "promote" the child. This reverses the parent-child relationship. (For more information on this, see the documentation.) The original rpool/ROOT file system is the parent of the clones that you create as BEs. In order to destroy an earlier BE that is that parent of other BEs, you must first promote one of the child BEs to be the ZFS parent. Only then can you destroy the original BE. Fortunately, this is easier to do than to explain: s10z# zfs promote rpool/ROOT/newBE s10z# zfs destroy rpool/ROOT/zbe-0 s10z# zfs list -r rpool/ROOT NAME USED AVAIL REFER MOUNTPOINT rpool/ROOT 3.56G 269G 31K legacy rpool/ROOT/newBE 3.56G 269G 3.55G / Documentation This feature is so new, it is not yet described in the Solaris 11 documentation. However, MOS note 1558773.1 offers some details. Conclusion With this new feature, you can add and patch packages to boot environments of a Solaris 10 Branded Zone. This ability improves the manageability of these zones, and makes their use more practical. It also means that you can use the existing P2V tools with earlier Solaris 10 updates, and modify the environments after they become Solaris 10 Branded Zones.

Read the article

obiee memory usage

- by user554629

Heap memory is a frequent customer topic. Here's the quick refresher, oriented towards AIX, but the principles apply to other unix implementations. 1. 32-bit processes have a maximum addressability of 4GB; usable application heap size of 2-3 GB. On AIX it is controlled by an environment variable: export LDR_CNTRL=....=MAXDATA=0x080000000 # 2GB ( The leading zero is deliberate, not required ) 1a. It is possible to get 3.25GB heap size for a 32-bit process using @DSA (Discontiguous Segment Allocation) export LDR_CNTRL=MAXDATA=0xd0000000@DSA # 3.25 GB 32-bit only One side-effect of using AIX segments "c" and "d" is that shared libraries will be loaded privately, and not shared. If you need the additional heap space, this is worth the trade-off. This option is frequently used for 32-bit java. 1b. 64-bit processes have no need for the @DSA option. 2. 64-bit processes can double the 32-bit heap size to 4GB using: export LDR_CNTRL=....=MAXDATA=0x100000000 # 1 with 8-zeros 2a. But this setting would place the same memory limitations on obiee as a 32-bit process 2b. The major benefit of 64-bit is to break the binds of 32-bit addressing. At a minimum, use 8GB export LDR_CNTRL=....=MAXDATA=0x200000000 # 2 with 8-zeros 2c. Many large customers are providing extra safety to their servers by using 16GB: export LDR_CNTRL=....=MAXDATA=0x400000000 # 4 with 8-zeros There is no performance penalty for providing virtual memory allocations larger than required by the application. - If the server only uses 2GB of space in 64-bit ... specifying 16GB just provides an upper bound cushion. When an unexpected user query causes a sudden memory surge, the extra memory keeps the server running. 3. The next benefit to 64-bit is that you can provide huge thread stack sizes for strange queries that might otherwise crash the server. nqsserver uses fast recursive algorithms to traverse complicated control structures. This means lots of thread space to hold the stack frames. 3a. Stack frames mostly contain register values; 64-bit registers are twice as large as 32-bit At a minimum you should quadruple the size of the server stack threads in NQSConfig.INI when migrating from 32- to 64-bit, to prevent a rogue query from crashing the server. Allocate more than is normally necessary for safety. 3b. There is no penalty for allocating more stack size than you need ... it is just virtual memory; no real resources are consumed until the extra space is needed. 3c. Increasing thread stack sizes may require the process heap size (MAXDATA) to be increased. Heap space is used for dynamic memory requests, and for thread stacks. No performance penalty to run with large heap and thread stack sizes. In a 32-bit world, this safety would require careful planning to avoid exceeding 2GM usable storage. 3d. Increasing the number of threads also may require additional heap storage. Most thread stack frames on obiee are allocated when the server is started, and the real memory usage increases as threads run work. Does 2.8GB sound like a lot of memory for an AIX application server? - I guess it is what you are accustomed to seeing from "grandpa's applications". - One of the primary design goals of obiee is to trade memory for services ( db, query caches, etc) - 2.8GB is still well under the 4GB heap size allocated with MAXDATA=0x100000000 - 2.8GB process size is also possible even on 32-bit Windows applications - It is not unusual to receive a sudden request for 30MB of contiguous storage on obiee.- This is not a memory leak; eventually the nqsserver storage will stabilize, but it may take days to do so. vmstat is the tool of choice to observe memory usage. On AIX vmstat will show something that may be startling to some people ... that available free memory ( the 2nd column ) is always trending toward zero ... no available free memory. Some customers have concluded that "nearly zero memory free" means it is time to upgrade the server with more real memory. After the upgrade, the server again shows very little free memory available. Should you be concerned about this? Many customers are !! Here is what is happening: - AIX filesystems are built on a paging model. If you read/write a filesystem block it is paged into memory ( no read/write system calls ) - This filesystem "page" has its own "backing store" on disk, the original filesystem block. When the system needs the real memory page holding the file block, there is no need to "page out". The page can be stolen immediately, because the original is still on disk in the filesystem. - The filesystem pages tend to collect ... every filesystem block that was ever seen since system boot is available in memory. If another application needs the file block, it is retrieved with no physical I/O. What happens if the system does need the memory ... to satisfy a 30MB heap request by nqsserver, for example? - Since the filesystem blocks have their own backing store ( not on a paging device ) the kernel can just steal any filesystem block ... on a least-recently-used basis to satisfy a new real memory request for "computation pages". No cause for alarm. vmstat is accurately displaying whether all filesystem blocks have been touched, and now reside in memory. Back to nqsserver: when should you be worried about its memory footprint? Answer: Almost never. Stop monitoring it ... stop fussing over it ... stop trying to optimize it. This is a production application, and nqsserver uses the memory it requires to accomplish the job, based on demand. C'mon ... never worry? I'm from New York ... worry is what we do best. Ok, here is the metric you should be watching, using vmstat: - Are you paging ... there are several columns of vmstat outputbash-2.04$ vmstat 3 3 System configuration: lcpu=4 mem=4096MB kthr memory page faults cpu ----- ------------ ------------------------ ------------ ----------- r b avm fre re pi po fr sr cy in sy cs us sy id wa 0 0 208492 2600 0 0 0 0 0 0 13 45 73 0 0 99 0 0 0 208492 2600 0 0 0 0 0 0 9 12 77 0 0 99 0 0 0 208492 2600 0 0 0 0 0 0 9 40 86 0 0 99 0 avm is the "available free memory" indicator that trends toward zerore is "re-page". The kernel steals a real memory page for one process; immediately repages back to original processpi "page in". A process memory page previously paged out, now paged back in because the process needs itpo "page out" A process memory block was paged out, because it was needed by some other process Light paging activity ( re, pi, po ) is not a concern for worry. Processes get started, need some memory, go away. Sustained paging activity is cause for concern. obiee users are having a terrible day if these counters are always changing. Hang on ... if nqsserver needs that memory and I reduce MAXDATA to keep the process under control, won't the nqsserver process crash when the memory is needed? Yes it will. It means that nqsserver is configured to require too much memory and there are lots of options to reduce the real memory requirement. - number of threads - size of query cache - size of sort But I need nqsserver to keep running. Real memory is over-committed. Many things can cause this:- running all application processes on a single server ... DB server, web servers, WebLogic/WebSphere, sawserver, nqsserver, etc. You could move some of those to another host machine and communicate over the network The need for real memory doesn't go away, it's just distributed to other host machines. - AIX LPAR is configured with too little memory. The AIX admin needs to provide more real memory to the LPAR running obiee. - More memory to this LPAR affects other partitions. Then it's time to visit your friendly IBM rep and buy more memory.

Read the article

how to rename files with count

- by nkint

i have a directory like this: randomized_quad015.png randomized_quad030.png randomized_quad045.png randomized_quad060.png randomized_quad075.png randomized_quad090.png randomized_quad1005.png randomized_quad1020.png randomized_quad1035.png randomized_quad1050.png randomized_quad105.png randomized_quad1065.png randomized_quad1080.png randomized_quad1095.png randomized_quad1110.png randomized_quad1125.png randomized_quad1140.png and i want to rename the first files adding 0 in front of number, like: randomized_quad0015.png but i don't know how.. some help?

Read the article

How to recreate spfile on Exadata?

- by Bandari Huang

Copy spfile from the ASM diskgroup to local disk by using the ASMCMD command line tool. ASMCMD> pwd +DATA_DM01/EDWBASE ASMCMD> ls -l Type Redund Striped Time Sys Name Y CONTROLFILE/ Y DATAFILE/ Y ONLINELOG/ Y PARAMETERFILE/ Y TEMPFILE/ N spfileedwbase.ora => +DATA_DM01/EDWBASE/PARAMETERFILE/spfile.355.800017117 ASMCMD> cp +DATA_DM01/EDWBASE/spfileedwbase.ora /home/oracle/spfileedwbase.ora.bak Copy the context from spfileedwbase.ora.bak to initedwbase.ora except garbled character. Using above initedwbase.ora, start one of the RAC instances to the mount phase. SQL> startup mount pfile=/home/oracle/initedwbase.ora Ensure one of the database instances is mounted before attempting to recreate the spfile. SQL> select INSTANCE_NAME,HOST_NAME,STATUS from v$instance; INSTANCE_NAME HOST_NAME STATUS ------------- --------- ------ edwbase1 dm01db01 MOUNTED Create the new spfile. SQL> create spfile='+DATA_DM01/EDWBASE/spfileedwbase.ora' from pfile='/home/oracle/initedwbase.ora'; ASMCMD will show that a new spfile has been created as the alias spfilerac2.ora is now pointing to a new spfile under the PARAMETER directory in ASM. ASMCMD> pwd +DATA_DM01/EDWBASE ASMCMD> ls -l Type Redund Striped Time Sys Name Y CONTROLFILE/ Y DATAFILE/ Y ONLINELOG/ Y PARAMETERFILE/ Y TEMPFILE/ N spfilerac2.ora => +DATA_DM01/EDWBASE/PARAMETERFILE/spfile.356.800013581 Shutdown the instance and restart the database using srvctl using the newly created spfile. SQL> shutdown immediate ORA-01109: database not open Database dismounted. ORACLE instance shut down. SQL> exit [oracle@dm01db01 ~]$ srvctl start database -d edwbase [oracle@dm01db01 ~]$ srvctl status database -d edwbase Instance edwbase1 is running on node dm01db01 Instance edwbase2 is running on node dm01db02 ASMCMD will now show a number of spfiles exist in the PARAMETERFILE directory for this database. The spfile containing the parameter preventing startups should be removed from ASM. In this case the file spfile.355.800017117 can be removed because spfile.356.800013581 is the current spfile. ASMCMD> pwd +DATA_DM01/EDWBASE ASMCMD> cd PARAMETERFILE ASMCMD> ls -l Type Redund Striped Time Sys Name PARAMETERFILE UNPROT COARSE FEB 19 08:00:00 Y spfile.355.800017117 PARAMETERFILE UNPROT COARSE FEB 19 08:00:00 Y spfile.356.800013581 ASMCMD> rm spfile.355.800017117 ASMCMD> ls spfile.356.800013581 Referenece: Recreating the Spfile for RAC Instances Where the Spfile is Stored in ASM [ID 554120.1]

Read the article

CodePlex Daily Summary for Tuesday, March 01, 2011

CodePlex Daily Summary for Tuesday, March 01, 2011Popular ReleasesDirectQ: Release 1.8.7 (Beta 3): Fixes some problems and adds some more enhancements.Sandcastle Help File Builder: SHFB v1.9.2.0 Release: NOTE TO 32-BIT WINDOWS XP USERS: There is a problem with a type converter that fails on 32-bit Windows XP due to how it searches for the framework versions. I'll issue an update later today that fixes the issue. This release supports the Sandcastle June 2010 Release (v2.6.10621.1). It includes full support for generating, installing, and removing MS Help Viewer files. This new release is compiled under .NET 4.0, supports Visual Studio 2010 solutions and projects as documentation sources, ...Network Monitor Open Source Parsers: Microsoft Network Monitor Parsers 3.4.2554: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, we have added 4 new protocol parsers and updated 79 existing parsers in the NetworkMonitor_Pa...Ajax Minifier: Microsoft Ajax Minifier 4.13: New features: switches and settings for turning off Conditional Compilation comment processing; for adding variable and/or function names that should not be renamed automatically; for adding manual renaming of variables/functions/properties; for automatic evaluation of certain literal expressions (but not all).Image Resizer for Windows: Image Resizer 3 Preview 1: Prepare to have your minds blown. This is the first preview of what will eventually become 39613. There are still a lot of rough edges and plenty of areas still under construction, but for your basic needs, it should be relativly stable. Note: You will need the .NET Framework 4 installed to use this version. Below is a status report of where this release is in terms of the overall goal for version 3. If you're feeling a bit technically ambitious and want to check out some of the features th...JSON Toolkit: JSON Toolkit 1.1: updated GetAllJsonObjects() method and GetAllProperties() methods to JsonObject and Properties propertiesFacebook Graph Toolkit: Facebook Graph Toolkit 1.0: Refer to http://computerbeacon.net for Documentation and Tutorial New features:added FQL support added Expires property to Api object added support for publishing to a user's friend / Facebook Page added support for posting and removing comments on posts added support for adding and removing likes on posts and comments added static methods for Page class added support for Iframe Application Tab of Facebook Page added support for obtaining the user's country, locale and age in If...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.1: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager small improvements for some helpers and AjaxDropdown has Data like the Lookup except it's value gets reset and list refilled if any element from data gets changedManaged Extensibility Framework: MEF 2 Preview 3: This release aims .net 4.0 and Silverlight 4.0. Accordingly, there are two solutions files. The assemblies are named System.ComponentModel.Composition.Codeplex.dll as a way to avoid clashing with the version shipped with the 4th version of the framework. Introduced CompositionOptions to container instantiation CompositionOptions.DisableSilentRejection makes MEF throw an exception on composition errors. Useful for diagnostics Support for open generics Support for attribute-less registr...PHPExcel: PHPExcel 1.7.6 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.4: Version: 2.0.0.4 (Milestone 4): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...VidCoder: 0.8.2: Updated auto-naming to handle seconds and frames ranges as well. Deprecated the {chapters} token for auto-naming in favor of {range}. Allowing file drag to preview window and enabling main window shortcut keys to work no matter what window is focused. Added option in config to enable giving custom names to audio tracks. (Note that these names will only show up certain players like iTunes or on the iPod. Players that support custom track names normally may not show them.) Added tooltips ...SQL Server Compact Toolbox: Standalone version 2.0 for SQL Server Compact 4.0: Download the Visual Studio add-in for SQL Server Compact 4.0 and 3.5 from here Standalone version of (most of) the same functionality as the add-in, for SQL Server Compact 4.0. Useful for anyone not having Visual Studio Professional or higher installed. Requires .NET 4.0. Any feedback much appreciated.Claims Based Identity & Access Control Guide: Drop 1 - Claims Identity Guide V2: Highlights of drop #1 This is the first drop of the new "Claims Identity Guide" edition. In this release you will find: All previous samples updated and enhanced. All code upgraded to .NET 4 and Visual Studio 2010. Extensive cleanup. Refactored Simulated Issuers: each solution now gets its own issuers. This results in much cleaner and simpler to understand code. Added Single Sign Out support. Added first sample using ACS ("ACS as a Federation Provider"). This sample extends the ori...Simple Notify: Simple Notify Beta 2011-02-25: Feature: host the service with a single click in console Feature: host the service as a windows service Feature: notification cient application Feature: push client application Feature: push notifications from your powershell script Feature: C# wrapper libraries for your applicationspatterns & practices: Project Silk: Project Silk Community Drop 3 - 25 Feb 2011: IntroductionWelcome to the third community drop of Project Silk. For this drop we are requesting feedback on overall application architecture, code review of the JavaScript Conductor and Widgets, and general direction of the application. Project Silk provides guidance and sample implementations that describe and illustrate recommended practices for building modern web applications using technologies such as HTML5, jQuery, CSS3 and Internet Explorer 9. This guidance is intended for experien...Minemapper: Minemapper v0.1.5: Now supports new Minecraft beta v1.3 map format, thanks to updated mcmap. Disabled biomes, until Minecraft Biome Extractor supports new format.HERB.IQ: HERB.IQ.NEW.INSTALL.0.6.0.zip: HERB.IQ.NEW.INSTALL.0.6.0.zipCoding4Fun Tools: Coding4Fun.Phone.Toolkit v1.2: New control, Toast Prompt! Removed progress bar since Silverlight Toolkit Feb 2010 has it.HubbleDotNet - Open source full-text search engine: V1.1.0.0: Add Sqlite3 DBAdapter Add App Report when Query Cache is Collecting. Improve the performance of index through Synchronize. Add top 0 feature so that we can only get count of the result. Improve the score calculating algorithm of match. Let the score of the record that match all items large then others. Add MySql DBAdapter Improve performance for multi-fields sort . Using hash table to access the Payload data. The version before used bin search. Using heap sort instead of qui...New ProjectsAssembly Explorer: Assembly Explorer is a developer utility that displays the namespaces, types, and members in an assembly. It also displays the MSIL or translated .NET language code.automated reporting system: ???????? ??????????? ?????????????? ???????????????? ????????? ?????? ?????????? ????????? Custom XSLT with Group by in Biztalk 2009: Custom XSLT with Group by in Biztalk 2009DotNet Repository: A simple to use, generic repository using Linq to SQL or Linq to Objects. euler 28: euler 28euler29: euler 29 problemFreeType for AirplaySDK: FreeType adoptation for Airplay SDK.Icicle Framework: An in-the-works component based game framework for XNA.Jogo dos Palitinhos: Jogo desenvolvido por alunos do 4º Ciclo Noturno de Programação do Curso de Análise de Sistemas e Tecnologia da Informação da Faculdade de Tecnologia de Carapicuíba. Este é o jogo dos palitinhos: uma mistura de lógica, advinhação e sorte. Será desenvolvido na plataforma Java.karmencita: Karmencita is a high level object query language for .NET . Its purpose is to allow easy querying from in memory structured data.Libero Site 011: libero sit 011MaLoRTLib: raytracer library used in the MaLoRT.MetroEdit: A WPF Text Editor based on the Metro UI Design Guidelines. Features: - Clean and simple UI based on Metro - 32bit and 64bit support - Tabbing - Syntax highlighting NOTE: Based on .NET Framework 4.0 and uses the following libraries: - MVVM Light Toolkit - AvalonEditMiaSocks: A .NET SOCKS Server Implementation base on SuperSocketmicroruntime: The MicroRuntime project is a .NET utility library.MVC Forum: A bulletin board system (like phpBB) running on ASP.NET MVC.newshehuishijianzhongxin: newshehuishijianzhongxinPrism Extension: Contains extensions for prism to reinforce some functionsRInterfaces: An interface to pass data toward and back from R and executing R code from .NETSharePoint 2007 Wiki Export: A very simple wiki export utility for SharePoint 2007. You can export a wiki library to the file system with the specified file extension, and wrapped in the speciified markup. Written in C#. The List service url is set dynamically so there is a dummy url in the configurations.Simon Squared: Simon Squared is a Multi-player Puzzle game for Windows Phone 7. It uses the XNA framework on the Phone, and the WCF Http CTP on the server side to handle communication between phones. It's written in C#.Sitefinity Toolkit: The Sitefinity Toolkit is a collection of enhancements to the Sitefinity Content Management System by Telerik. It currently supports Sitefinity version 3.7 (through SP4), and includes a number of tools to automate and simplify a number of actions and features.Slog: Slog is blog engine like Wordpress in Silverlight 4 that will have same fonctionality to bigin with and the same extensiblity thanks to MEF. Server side will be WCF DataServices, Entity Framework 4 and SQL Server Compact 4.SnagL: Social Network Analysis Graph Live (SnagL) is a light-weight, pluggable application that operates from a web browser and works with existing applications and back-end data stores to provide a visual way to understand information and enhance analysis.SocialShare Starter Kit: SocialShare Starter Kit is a web application that illustrate a wide range of features that needed to build a social site.This web application framework written in C# ASP.NET 4.0.Split Large XML file into small XML files: Split Large XML file into group of smaller XML files in sequential order. As posted to http://codeproject.com <a href='http://www.codeproject.com/KB/XML/SplitLargeXMLintoSmallFil.aspx'>Link</a>SSIS SSH Components: SSIS control flow tasks for SFTP and executing shell commands along with an SSH connection manager.StudioShell: StudioShell is a deeply integrated PowerShell module for Visual Studio 2010 and 2008. It will change the way you interact with your IDE and code by exposing the IDE extensibility features to PowerShell. What once took a binary can now be done in a one-liner.TBS: TBS TEZ BILGI SISTEMI tez bilgi sistemiuTestingService: uTestingService is a webservice with wrappers around Node and Document to allow for end-end testing of UmbracoWebsite Panel: Website Panel is a Windows application to help you manage multiple Dotnetnuke applications. Easy installations, backups & upgrades of DNN websites are just a few features of this application. Zinc: Zinc is a utility library for ASP.NET web forms development. It has support for: - utility methods for working easier with controls - CSV exports - HttpModules for dealing with caching and path based rights. - custom controls This library runs on .NET 2.0 and i would like to kee

Read the article

shotwell 0.12 shared library error

- by blade19899

i installed shotwell 0.12 like so via its official ppa sudo add-apt-repository ppa:yorba/ppa sudo apt-get update sudo apt-get install shotwell and when i tried to run it via dash it didn't start. i then typed in the gnome-terminal "shotwell" I then got this error error while loading shared libraries: libgexiv2.so.0: cannot open shared object file: No such file or directory my question is how to get shotwell 0.12 up and running in ubuntu 11.10 amd64

Read the article

Oracle Optimized Solutions at Oracle OpenWorld 2012

- by ferhatSF

Have you registered for Oracle OpenWorld 2012 in San Francisco from September 30 to October 4? Visit the Oracle OpenWorld 2012 site today for registration and more information. Come join us to hear how Oracle Optimized Solutions can help you save money, reduce integration risks, and improve user productivity. Oracle Optimized Solutions are designed, pre-tested, tuned and fully documented architectures for optimal performance and availability. They provide written guidelines to help size, configure, purchase and deploy enterprise solutions that address common IT problems. Built with flexibility in mind, Oracle Optimized Solutions can be deployed as complete solutions or easily tailored to meet your specific needs - they are proven to save money, reduce integration risks and improve user productivity. Here is a preview of the planned Oracle OpenWorld sessions(*) on Oracle Optimized Solutions. October 1, 2012 Monday Time Session ID Title Location 12:15 PM CON7916 Accelerate Oracle E-Business Suite Deployment with SPARC SuperCluster Moscone West - 2001 03:15 PM GEN9691 General Session: Accelerate Your Business with the Oracle Hardware Advantage Moscone North - Hall D 04:45 PM CON4821 Building a Flexible Enterprise Cloud Infrastructure on Oracle SPARC Systems Moscone West - 2001 October 2, 2012 Tuesday Time Session ID Title Location 10:15 AM CON4561 Backup-and-Recovery Best Practices with Oracle Engineered Systems Products Moscone South - 252 11:45 AM CON3851 Optimizing JD Edwards EnterpriseOne on SPARC T4 Servers for Best Performance Moscone West - 2000 01:15 PM GEN11472 General Session: Breakthrough Efficiency in Private Cloud Infrastructure Moscone West - 3014 01:15 PM CON4600 Extreme Storage Scale and Efficiency: Lessons from a 100,000-Person Organization Moscone South - 252 05:00 PM CON9465 Next-Generation Directory: Oracle Unified Directory Moscone West - 3008 05:00 PM CON4088 Accelerate Your SAP Landscape with the Oracle SPARC SuperCluster Moscone West - 2001 05:00 PM CON7743 High-Performance Security for Oracle Applications Using SPARC T4 Systems Moscone West - 2000 05:00 PM CON3857 Archive Strategies for 100 Percent Data Availability Moscone South - 270 October 3, 2012 Wednesday Time Session ID Title Location 10:15 AM CON6528 Configure Oracle Hybrid Columnar Compression to Optimize Query Database Performance up to 10x Moscone South - 252 11:45 AM CON2590 Breakthrough in Private Cloud Management on SPARC T-Series Servers Moscone South - 270 01:15 PM CON4289 Oracle Optimized Solution for Siebel CRM at ACCOR Moscone West - 2000 05:00 PM CON7570 Improve PeopleSoft HCM Performance and Reliability with SPARC SuperCluster Moscone South - 252 * Schedule subject to change In addition, there will be Oracle Optimized Solutions Hands-On-Labs sessions planned. Please enroll ahead of time as space is limited: Oracle Optimized Solutions: Hands on Labs in Oracle OpenWorld Place: Marriott Marquis - Salon 14/15 Date and Time Session ID Title Monday October 1, 2012 01:45 PM HOL9868 Enterprise Cloud Infrastructure for SPARC with Oracle Enterprise Manager Ops Center 12c Monday October 1, 2012 03:15 PM HOL9907 Oracle Virtual Desktop Infrastructure Performance and Tablet Mobility Wednesday October 3, 2012 05:00 PM HOL9870 x86 Enterprise Cloud Infrastructure with Oracle VM 3.x and Sun ZFS Storage Appliance Thursday October 4, 2012 11:15 AM HOL9869 0 to Database Backup and Recovery in 60 Minutes Oracle Optimized Solutions executives and experts will also be at hand for discussions and follow ups. And don’t forget to catch live demonstrations of our complete Oracle Optimized Solutions while at Oracle OpenWorld 2012 in San Francisco. We recommend the use of the Schedule Builder tool to plan your visit to the conference and for pre-enrollment in sessions of your interest. We hope to see you there!

Search Results

Search found 26517 results on 1061 pages for 'large directory'.

Page 402/1061 | < Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409 | Next Page >

- by Sherlock3890

- by Mixhael

- by DarrenVortex

- by Dave Campbell

- by Salil P

- by KunaalKapoor

- by MarkPearl

- by Esmail0022

- by mark.wilcox

- by Miranda Webb

- by ng0323

- by Thomas

- by Adrian Matteo

- by Jaime

- by Chris W Beal

- by Tassos

- by Nazariy

- by Jeff Victor

- by user554629

- by nkint

- by Bandari Huang

- by blade19899

- by ferhatSF

< Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409 | Next Page >