Search Results

Search found 11608 results on 465 pages for 'usb extension'.

Page 405/465 | < Previous Page | 401 402 403 404 405 406 407 408 409 410 411 412  | Next Page >

• Ubuntu 10.10 - PC shutdown before boot shortly after BIOS loads

  - by clem

  Hi - Since installing Ubuntu 10.10 from Karmic I've started getting problems with starting up the PC. I've done a complete wipe (Boot and Nuke) of the hard drive and reinstalled Ubuntu 10.10 but the problem still occurs. There is no dual boot on the PC, just Ubuntu. Here is the problem: Each morning, when I turn the PC on from being off overnight, the PC starts up and loads the BIOS. I get the following message : "Verifying DMI Pool Data... K8 NPT Data Change...Update New Data to DMI!....... Then poof the computer shuts off. However, after switching the computer back on around 6 or 7 times after it's turned itself off, it will eventually boot up without any problem. Also, once up and running for a while, I can shutdown and restart the PC first time, without any issues. I have also noticed a problem with the USB mouse being recognised and once I finally get the computer booted up, I need to unplug and then plug the mouse back in to get it working. I've opened the PC up and checked the connections (cables, cards and memory) and it all seems fine. The main issue with troubleshooting this problem is I cannot test any suggestions or fixes until the next morning because once the computer is up and running it will remain so! I do not leave the computer on overnight to save energy. So.. is this a hardware / boot software issue? This is a very odd problem and I have googled to no avail. Any suggestions? Many thanks Clem

  Read the article

• How to automatically start VM created by virt-manager?

  - by Jeff Shattock

  I have created a virtual machine with virt-manager that runs on kvm/qemu. The machine works well when started through virt-manager. However, I would like to be able to start and stop the VM through a script in init.d, so that it comes up and down along with the host. I need to have virt-manager show that the machine is running, and to be able to connect to its console through there. When I use the command line that is produced by running ps -eaf | grep kvm after starting the vm through virt-manager, I get some console messages about redirected character devices, but the machine does start and runs properly. However, I do not get any indication from virt-manager that it has started. How can I modify the command line to get virt-manager to pick up the running VM? Is there anything else about the command line that should change when starting outside of virt-manager? Command line is (slightly reformatted for readability): /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 512 -smp 1 -name BORON \ -uuid fa7e5fbd-7d8e-43c4-ebd9-1504a4383eb1 \ -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/BORON.monitor,server,nowait \ -monitor chardev:monitor -localtime -boot c \ -drive file=/dev/FS1/BORON,if=ide,index=0,boot=on,format=raw \ -net nic,macaddr=52:54:00:20:0b:fd,vlan=0,name=nic.0 \ -net tap,fd=41,vlan=0,name=tap.0 -chardev pty,id=serial0 -serial chardev:serial0 \ -parallel none -usb -usbdevice tablet -vnc 127.0.0.1:1 -k en-us -vga cirrus

  Read the article

• Grub Installation Failed: Fatal Error ... now what I do?

  - by eklavya

  I know there are some threads that touch this but I feel I have done something uniquely stupid. hence the post and plea for help. I am a beginner @ Linux. So I have a PC with a HDD (hard disk drive) and SSD (solid state drive) It was running Linux Mint /dev/sda1 - HDD Partition 1 - 2 TB (mounted this is /home /dev/sda2 - HDD Partition 2 - 1 TB (separate back up drive, i was backing up files to this) /dev/sdb1 - SSD Partition 1 - 100 GB (OS) /dev/sdb2 - SSD Partition 2 - 20 GB (Swap) The operating system was Linux Mint and was installed on the /dev/sdb1 i.e the solid state drive. I had partitioned off the sda into 2 TB and 1TB and presented the 2 TB as the /home to the OS. Anyway last night I decided to make a return to Ubuntu via the path of Elementary OS. Everything went fine with the install until it stated that GRUB installed failed and this was a Fatal error (no kidding I said). No I am stuck. I have definitely done something wrong and don't know what it is... My biggest pain is the files on the /dev/sda2. I want to save these before I try something drastic like wiping off the /dev/sda completely. So I have the following questions... Can I use a liveCD USB to save these files ? I can see the /dev/sda2 but was unable to access the files in the liveCD last not least ... how do I fix the main issue here. Why could the OS not install GRUB 2b... why is my SSD the /dev/sdb ... and not /dev/sda. Does that have something to do with it that my master boot record sits on the HDD /dev/sda and not /dev/sdb

  Read the article

• HDD dead forever???

  - by Roberto

  Yesterday I turned on my computer and it couldn't boot. I found out the hd (320GB SATA Seagate Momentus 7200.3 for notebook) was broken, it couldn't be recognized by the BIOS. I have another of the same hd, so I exchanged the boards. I found out that there is a problem on its board since my good hd didn't work. But the broken hd doesn't work with the good board as well: it can be recognized but when I insert a Windows Instalation DVD it says the hd is 0GB. I put it in a case and use it in another computer via USB, and but it doesn't show up in the "My Computer". I used a software to recover files called "GetDataBack for NTFS", it recognized the hd but with the wrong size (2TB). I try to make it read the hd but it get an I/O error reading sector. It tries to read, the hd spins... So, since I'm using a good board on it, the problem seems to be internal. Is there anything someone could do recover the files from it?

  Read the article

• (Windows 7) Shared External Drive Permission Issues

  - by connec

  So, say I share my system (C) drive through windows (E.g. properties -> Sharing -> Advanced Sharing -> Share this Folder). I can then access this drive at \\Comp\C on another networked computer - all is well. However, if I insert a removable (USB) disk, say "E", and proceed to share it the same way, when I attempt to access \\Comp\E (either directly or through browsing) I get an error: Windows cannot access \\Comp\E You do not have permission to access \\Comp\E. Contact your network administrator to request access. Now, the permissions (Advanced Sharing -> Permissions) are set with "Everyone" having read access (same as the internal drive), so this doesn't make a lot of sense. Also of note, I have an SSH server on my computer (through Cygwin) and even through SSH (logging in as an administrator user) I cannot access /cygdrive/e (although /cygdrive/c is accessible). As a final note, the drive is of course accessible on the host machine (E:\), and also at \\Comp\E on the host machine.

  Read the article

• Suggestions for cleaning up the mess after removing the "system tool" virus?

  - by Ross

  Hi! Last night I got infected with the "System Tool" virus. For those who don't know it disallows the user from executing any software, changes the desktop, stops all security software from running, and continually requests that you buy a Trojan security software. It took me a few hours but I finally managed to remove the software. To do this I went into my Ubuntu partition and searched out files that had been created around the time that I got infected and deleted the executable. Then I went back into my W7 partition and ran an MBAM full scan, an MSE full scan, an AVG bootable USB scan, and ran a ClamAV scan from my Ubuntu partition (Together these found 3 more infected executables). I also ran a Ccleaner full sweep and the registry cleaner just in case. I think I have found all of the problems but am still concerned that there might be a payload leftover from the virus that I didn't find. Do you have any suggestions of what else I can do to be sure. Just FYI I use W7 64 bit and MSE as my primary antivirus. I was using chrome when I got infected and it seems that it was due to a slightly out of date Java installation (MSE gave me a warning that the website had used a Java exploit and then my desktop changed to the classic "System Tools" desktop) Thank you very much for your help.

  Read the article

• How to decouple development server from Internet?

  - by intoxicated.roamer

  I am working in a small set-up where there are 4 developers (might grow to 6 or 8 in cuople of years). I want to set-up an environment in which developers get an internet access but can not share any data from the company on internet. I have thought of the following plan: Set-up a centralized git server (Debian). The server will have an internet access. A developer will only have git account on that server, and won't have any other account on it. Do not give internet access to developer's individual machine (Windows XP/Windows 7). Run a virtual machine (any multi-user OS) on the centralized server (the same one on which git is hosted). Developer will have an account on this virtual machine. He/she can access internet via this virtual machine. Any data-movement between this virtual machine and underlying server, as well as any of the developer's machine, is prohibited. All developers require USB port on their local machine, so that they can burn their code into a microcontroller. This port will be made available only to associated software that dumps the code in a microcontroller (MPLAB in current case). All other softwares will be prohibited from accessing the port. As more developers get added, providing internet support for them will become difficult with this plan as it will slow down the virtual machine running on the server. Can anyone suggest an alternative ? Are there any obvious flaws in the above plan ? Some key details of the server are as below: 1) OS:Debian 2) RAM: 8GB 3) CPU: Intel Xeon E3-1220v2 4C/4T

  Read the article

• How to avoid duplicates when copying files that have been renamed at the destination

  - by Benoitt

  I have to get pictures from a folder – with subfolders which are updated automatically – with their extensions. These files have to be copied in a folder where a website based on PHP will edit them (by renaming and creating an XML file) to be downloadable and integrated in an XML feed. Because of the rename function of the script, when I perform the copy gain, all the files are duplicated, because the script has renamed the original ones already. I've tried a few things with rsync but I'm looking for something more powerful because I can't copy files with an external "history". #!/bin/bash find '/home/name/picture' -name '*.jpg' | while read FILE ; do rsync --backup --backup-dir=incremental --suffix=.old "$FILE" /var/www/media ; done wget --spider 'http://myscript.php' ; #exit 0 PS: As a little addition, I'd like to replace '.' with a 'space' just after the *.jpeg copy. My PHP script has some problem to define files with comma because of the extension. I'm finking about a command with find – like I did before – with a sed function? Is that a good idea?

  Read the article

• How to use non-free drivers during debian install

  - by blokeley

  I'm trying to install debian stable using unetbootin. The install process fails with "network autoconfiguration failed", probably due to the ethernet driver not working. My Lenovo U350 has a Broadcom BCM57780 which does not seem to be supported out-of-the-box: there are various bug reports here, here and here, but I don't know if the fix has made it into debian (6) stable. One discussion says that you have to use an ethernet driver from the firmware-linux-nonfree package. I'm not sure that this is correct because the BCM57780 is not in the list of drivers in firmware-linux-nonfree. The specific question tree is: Is BCM57780 supported in debian stable? If so, what could be wrong? Should I install debian unstable instead? If not, do I need to use firmware-linux-nonfree during installation and, if so, how do I do this? Please note: I've used ubuntu and debian loads in the past but please post line-by-line guidance rather than some cryptic abbreviation of any instructions. Thanks in advance for any help. Updates: Debian stable with non-free drivers did not work. Debian unstable (free drivers only) did not work. Tried loading firmware-iwlwifi_0.28_all.deb from another USB stick to get wireless working rather than BCM57780. The .deb file was found but the network configuration still failed! That's it, I'm giving up. Unfortunately I'll use ubuntu even though the Unity user interface will be very unstable for the next couple of years :(

  Read the article

• How can I extract data from Toshiba Satellite with a dead Windows installation?

  - by msanford

  I've got a Toshiba Satellite (unknown model number but bought early 2010) running Windows Vista which throws a kernel error on boot. We don't have the restore/recovery CD any more to restore the Windows partition. I have managed to boot to a Live CD version of Ubuntu 10.10 and have mounted the internal hard drive (which takes nearly 8 minutes). I suspect that the hard drive is malfunctioning, however, because copy tasks of even 30 megs of data to an attached and mounted USB flash drive takes over an hour, and some files are mysteriously inaccessible (not a permissions issue). When browsing folders, it takes many minutes to populate the folder window even with a single tiny file. During the copy tasks, the hard disk sounds like it tries to sleep several times in rapid succession, then continues accessing, it sounds, at full throughput. I initially tried using scp (from the shell) to copy data but I encountered the same local problems. I don't know the S.M.A.R.T. status of the hard disk, either. Is there a more effective way of going about recovering the data on the internal disk, assuming that I can't use a recovery CD and am too cheap to bring it in (for now, at least)?

  Read the article

• How To Completely Move Users/Program Files/Program Files (x86)/ProgramData (Folders) To Another Partition(s) On Windows 8?

  - by Enigma83

  I am attempting to move folders Users Program Files Program Files (x86), ProgramData (at the root of the C drive) to at least 2 other partitions, preferably on a fresh install. I have read that there are methods for doing this post-install, but it seems like it would be a bit more tedious to do things that way. I want to move the 2 Program Files folders to another partition on the same HDD, and Users/ProgramData will go to yet another partition on same HDD. I have done a bit of research on this, read up on some things that involved booting into Audit Mode, using the RoboCopy command to copy folders via booting into my Windows 8 USB drive, creating NTFS junctions/symbolic links, Registry edits, as well as accomplishing this automatically by creating an auto-attend file which Windows Setup processes automatically before the user is ever booted in for the 1st time. I tried this morning and now have a basic installation in which programs like Internet Explorer fail to open, certain files can't be found/opened (even if I click on them directly), an example is Regedit. Also, I can't run the Command/DOS (CMD) prompt as Administrator (or otherwise, as any other user), can't activate the real Administrator account or open any of the Administrative Tools (despite having added them to my Start Screen). So far I have only tried RoboCopy-ing Program Files and Program Files (x86) so far, creating junction points for them, and editing the Registry in the relevant locations. This is what I'm left with now. I also found the following blog article which describes how to do this for Windows 7 So, where should I go from here and where can I find more information? And how can this be done without disabling the Metro apps, which I've read will stop working if you move ProgramData. Once I have everything moved, where do I install programs to? Do I tell them to install to C:\Program Files\Program Files (x86) or to the junctioned/symbolic-linked partition/drive? I plan to test in VMware virtual machines from here on until things are working correctly, while using a baseline default install for daily tasks.

  Read the article

• Determine which user initiated call in Asterisk

  - by adaptive

  I had the following code in my extensions.conf file: [local] exten => _NXXNXXXXXX,1,Set(CALLERID(name)=${OUTGOING_NAME}) exten => _NXXNXXXXXX,n,Set(CALLERID(num)=${OUTGOING_NUMBER}) Now I want to change this code to set the CallerID and number based on the user/extension that is making the call. In fact I have four(4) users/extensions in my sip.conf and only one of them (the one I use for business) is supposed to send a different caller id/number. Everything is in the same context (for simplicity) since all lines need to be able to pick up an incoming call. The only difference is when line1 needs to make a call, it has to send a different caller id/number and use a different provider. This is what I have so far: [local] exten => _NXXNXXXXXX,1,Set(line=${SIP_HEADER(From)}) exten => _NXXNXXXXXX,n,Verbose(line variable is <${line}>) exten => _NXXNXXXXXX,n,Set(CALLERID(name)=${IF($[ ${line} = line1 ]?${COMPANY_NAME}:${FAMILY_NAME})}) exten => _NXXNXXXXXX,n,Set(CALLERID(num)=${IF($[ ${line} = line1 ]?${COMPANY_NUMBER}:${FAMILY_NUMBER})}) exten => _NXXNXXXXXX,n,Dial(${IF($[ ${line} = line1]?SIP/${EXTEN}@${COMPANY_PROVIDER}:SIP/${EXTEN}@${FAMILY_PROVIDER})}) I really don't know if this is correct and I'm afraid to commit these changes to my extensions.conf before validating. Any help will be greatly appreciated.

  Read the article

• .lnk doesn't open, no errors

  - by MushinNoShin

  I have a shortcut (.LNK) on my desktop to a MS Access database out on a network drive. When I double click that shortcut I get an hour glass for about 10 seconds and then nothing. No errors, no access opening, nothing happens. It appears as if there's not even an MSAccess process running in the background. The file successfully opens from: The Open dialog in Access The commandline "C:\path\to\MSACCESS.EXE C:\path\to\shortcut.lnk" The commandline "C:\path\to\MSACCESS.EXE C:\path\to\whatTheShortcutPointsTo.mdb" The file silently fails to open from: Double clicking the shortcut.lnk Double clicking the mdb file that shortcut.lnk targets At first I thought it had to do with how the link handler operated but the fact that it does the same exact thing when I try to open the mdb directly in explorer makes me think it's an issue with explorer. I've tried restoring, deleting, and recreating the association with the extension. I've tried running MSACCESS.EXE /regserver. I've run out of things to throw at it. In case this is specific to MS Access 2007; I'm trying to use 2007 :)

  Read the article

• Print job leaves queue but document isn't printed

  - by midnightstar

  I'm dealing with an HP Deskjet F380 All-in-One printer. It's connected via USB to a desktop running Windows 7 Enterprise x64. If I attempt to print something like a web page or a word document, the print job will show up in the print queue and the printer would stir. By stir, I mean, it would seem to prepare itself to print. However, the print job would then leave queue (I'm thinking the computer sees it as completed) and the printer would never actually print anything. However I went into Printers and Devices under the Windows start menu, into printer properties, and print a test page, the test page would print out successfully. I attempted to uninstall and re-install the printer drivers for the printer, but the printer would continue the same behavior afterwards. I also connected the printer to another computer and the printer will print just about anything. I also checked to make sure that the computer the printer needs to be connected to was update to date as far as the OS. The machine is fully up to date. I played with the way the computer handles printer spooling. Under the printer properties, under the "Advanced" tab, I had the print job print directly to the printer. In all these instances, the same behavior continues. I've restarted the printer spooling service. I've also gone under C:\Windows\System32\spool\PRINTERS and deleted files that were sitting in the folder. I have ran SFC /scannnow and the system found no errors in the system's integrity. I had the computer and printer make a cold reboot individually. The only lead I really have going for me is that since the printer prints on other PCs, I can only assume that there is something wrong with the way the PC is configured.

  Read the article

• Debian: Unable to mount a second drive as a subdirectory inside of another partition.

  - by jkndrkn

  Hello. I have the following /etc/fstab: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/md1 / ext3 defaults,errors=remount-ro 0 1 /dev/md0 /boot ext3 defaults 0 2 /dev/md5 /home ext3 defaults 0 2 /dev/md3 /opt ext3 defaults 0 2 /dev/md6 /tmp ext3 defaults 0 2 /dev/md2 /usr ext3 defaults 0 2 /dev/md4 /var ext3 defaults 0 2 /dev/md7 none swap sw 0 0 /dev/sdc /home/httpd ext3 defaults 0 2 /dev/hda /media/cdrom0 udf,iso9660 user,noauto 0 0 /dev/sdc1 /mnt/usb/backup-1 auto defaults 0 0 I am unable to get /dev/sdc/ to mount at /home/httpd/ on reboot. The /home/httpd/ directory exists. Mounting via mount -t ext3 /dev/sdc /home/httpd works just fine. Mounting via mount -a generates the following error message: mount: you must specify the filesystem type This is, incidentally, the same message that I see while booting. The error message goes away if I comment out the line in fstab starting with /dev/sdc.

  Read the article

• Unusual HEAD requests to nonsense URLs from Chrome

  - by JeremyDWill

  I have noticed unusual traffic coming from my workstation the last couple of days. I am seeing HEAD requests sent to random character URLs, usually three or four within a second, and they appear to be coming from my Chrome browser. The requests repeat only three or four times a day, but I have not identified a particular pattern. The URL characters are different for each request. Here is an example of the request as recorded by Fiddler 2: HEAD http://xqwvykjfei/ HTTP/1.1 Host: xqwvykjfei Proxy-Connection: keep-alive Content-Length: 0 User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/534.13 (KHTML, like Gecko) Chrome/9.0.597.98 Safari/534.13 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 The response to this request is as follows: HTTP/1.1 502 Fiddler - DNS Lookup Failed Content-Type: text/html Connection: close Timestamp: 08:15:45.283 Fiddler: DNS Lookup for xqwvykjfei failed. No such host is known I have been unable to find any information through Google searches related to this issue. I do not remember seeing this kind of traffic before late last week, but it may be that I just missed it before. The one modification I made to my system last week that was unusual was adding the Delicious add-in/extension to both IE and Chrome. I have since removed both of these, but am still seeing the traffic. I have run virus scan (Trend Micro) and HiJackThis looking for malicious code, but I have not found any. I would appreciate any help tracking down the source of the requests, so I can determine if they are benign, or indicative of a bigger problem. Thanks.

  Read the article

• Windows 7 does not detect my new hard drive?

  - by jasondavis

  I just built a really nice new PC. Some specs... Intel i7-930 CPU ASRock Extreme X58 motherboard with sata 3 and USB 3.0 12gb of G-Skill DDR3 RAM 80gb Intel G2 Solid state drive for Windows 7 and other programs to run on Windows 7 Pro 64bit OS 2 1gb grapghic cards for 4 monitor support Thats the main components. Well today my new 1tb western digital hard drive came which I plan to use for data to preserve the life of my SSD (hopefully). I hooked up it's sata power input and then hooked up it's sata data cable to a sata 2 port on my motherboard, I boot windows 7 and go into my computer and the drive is not showing up with my other drives. I then re-boot again and check again, no luck. I then shut down the PC and open the case back up, I then check my connections and they all look good. I then boot up and I can see the new HD is on and spinning. I then go into my BIOS settings to see if it registers there and it DOES! It shows I have a WD 1tb hard drvie on sata 2 port 6. So I am at a loss of why it is not showing up as an option in windows? Windows acts as if the drive is not there. Please help

  Read the article

• Laptop freezing every few seconds, including screen + sound

  - by zenstealth

  Just a few days ago, my Windows 7 HP dv4170us (1.76Ghz CPU, 1GB Ram) laptop started to freeze every other second where everything on screen and and sound (such as a song playing in iTunes) would just freeze until I bash it violently (without actually breaking the laptop) or wait for a couple of more seconds. I think it started one night when I noticed that a USB mouse of mine stopped working, and it displayed random "Device was not recognized" errors. I just unplugged the mouse and ignored it. Skip forward to the next day, is started freezing, and as of today I can't get my computer to not keep freezing. I tried to backup my files onto an external hdd, but it almost corrupted the drive. I ran 4 complete virus scans using MSSE and MalwareBytes (both quick and full scans), and they all came up clean. In the Task manager, the CPU usage is on a constant max, and so is the RAM (if I have just a few apps running, I only have like 30Mb of free RAM left). Also, on the outside of my laptop, right above where the CPU is located, it's very, very hot. I suspect that something is wrong internally within inside of the computer, but I'm not sure. It also does the same thing when booted into Ubuntu.Does anyone know what could be wrong with it?

  Read the article

• Windows 7 delayed file delete

  - by GregoryM

  I'm stuck with a pretty rare problem that happens on Windows 7 OS only. Every time I'm deleting the file with *.exe extension through explorer, the file doesn't get deleted immediately. I'm forced to wait for around one-two minutes before the system will delete the file. The main problem is that I cannot develop in such situation, because every time I build my solution, the old executable gets 'deleted', but is still there. So the new one cannot be created by Visual Studio. This problem breaks the Steam update progress and a few other installers functionality too. Fresh installed Win7 doesn't have this kind of trouble, so I guess this must be some bad registry entries or some services. Browsing the internet for solutions I found only this: http://www.sevenforums.com/software/72091-several-minute-delay-when-deleting-any-exe-file.html. But the solution the author found is not working (change the userName :)). Is there any ideas how to find what causes this to happen? BTW: when I place the file into Trash bin, no delay occurs. When I delete file with Total Commander - no delay too. Tech details: Windows 7 x64 Ultimate.

  Read the article

• Working with an external button box

  - by Scott

  I tried this question on Stack Overflow, but I was pointed here, so here goes: For a new project for myself, I am looking for a way to be able to (for example) open a pop-up window on my laptop, by pressing a button on an external device (to be build by myself, or at least bought) connected with USB. Basically I would be looking at something like a Arduino or Raspberry (IF I am looking in the right direction) with buttons on it, and as soon as I hit a button on the external box with physical buttons, a command activates on my laptop and for example opens a popup window in which I can input tekst. Does anyone know: 1) if it is possible to do this at all. 2) What equipment is needed for the external box, what programming is needed. I preffer .net (dot net) but maybe it can only be done with software from the external box. If anyone can point me in the right direction, like make/model of the external box or websites I would be very happy. I have knowledge of Visual Studio/.net but I am willing to learn other languages if .net is not an option for this project. Thanks in advance Scott PS: If anyone knows of some better tags, or at least knows what I mean and needs me to edit the question, please do tell me... I am new on Stack Overflow/Superuser.

  Read the article

• netbook screen stays black

  - by sam113101

  I have an acer aspire one netbook. The screen is black but the computer turns on (LED's are on, fan is spinning, etc.) By black I mean absolutely no backlight. I tried to remove the battery and power it on to "discharge" it (I read that on the Internet, not sure if that ever fixes anything), but no luck. I also tried to replace the RAM stick with another one (which I know for sure is working properly), still no luck. I tried to connect an external monitor and switch to it (fn + f5 on this particular model), still no luck, nothing on the external monitor. I read that flashing the BIOS could fix it (http://community.spiceworks.com/how_to/show/22042-acer-aspire-one-black-screen-of-death), I tried to flash it but basically it doesn't do anything when I power it on with the usb thumb drive. No blinking power button. To me it sounds like it might be a dead motherboard, a dead RAM slot (there's only one), or the BIOS thing. I would like to rule out the BIOS possibility, but I need help. The reason I ruled out the dead screen possibility is that it did not switch to the external display when I pressed fn + f5, am I wrong by assuming so? Thank you for your help.

  Read the article

• Designing a persistent asynchronous TCP protocol

  - by dogglebones

  I have got a collection of web sites that need to send time-sensitive messages to host machines all over my metro area, each on its own generally dynamic IP. Until now, I have been doing this the way of the script kiddie: Each host machine runs an (s)FTP server, or an HTTP(s) server, and correspondingly has a certain port opened up by its gateway. Each host machine runs a program that watches a certain folder and automatically opens or prints or exec()s when a new file of a given extension shows up. Dynamic IP addresses are accommodated using a dynamic DNS service. Each web site does cURL or fsockopen or whatever and communicates directly with its recipient as-needed. This approach has been suprisingly reliable, however obvious issues have come up and the situation needs to be addressed. As stated, these messages are time-sensitive and failures need to be detected within minutes of submission by end-users. What I'm doing is building a messaging protocol. It will run on a machine and connection in my control. As far as the service is concerned, there is no distinction between web site and host machine -- there is only one device sending a message to another device. So that's where I'm at right now. I've got a skeleton server and a skeleton client. They can negotiate high-quality authentication and encryption. The (TCP) connection is persistent and asynchronous, and can handle delimited (i.e., read until \r\n or whatever) as well as length-prefixed (i.e., read exactly n bytes) messages. Unless somebody gives me a better idea, I think I'll handle messages as byte arrays. So I'm looking for suggestions on how to model the protocol itself -- at the application level. I'll mostly be transferring XML and DLM type files, as well as control messages for things like "handshake" and "is so-and-so online?" and so forth. Is there anything really stupid in my train of thought? Or anything I should read about before I get started? Stuff like that -- please and thanks.

  Read the article

• Windows 7 misses keystrokes from internal keyboard after hibernation (on Acer Aspire 5820)

  - by ron

  I face a very strange symptom on my Acer Aspire laptop (with the factory default Win7 install and divers. Windows update running). After waking the computer from hibernation, it is a pain to type, since on average 5-10 keypresses are missing per 100 presses, using the laptop's keyboard. Steps to reproduce: 1) Power off 2) Power on, wait for system to become usable 3) Open notepad, for 5 times do hit 10x the same character. This gives a similar pattern of 50 chars total: xxxxxxxxxxyyyyyyyyyyaaaaaaaaaassssssssssdddddddddd 4) Optionally repeat. Everything is fine this far. 5) Hibernate. 6) Power on and resume. 7) Repeat steps 3)-4). This time approximately 3-5 character will be missing from each 50 characters. What I ruled out: putting to Sleep or just Locking and resuming from there does not cause problem battery / AC usage does not matter net connection does not matter running processes seem to be the same before and after hibernation key press speed doesn't really matter. For the test I use a nominal 3-5 strokes/second beat. plugging in an external USB keyboard works fine, but the built-in one still misbehaves What could be the problem? How could I diagnose if the keypresses arrive in, but get swallowed at some point? (maybe some nasty keyboard handler hook misbehaves?). Update: It seems that pushing the PowerSmart button and toggling to power saving state fixes the problem. Also, toggling it again back to the original state keeps it fixed. So this may be a fine workaround, but is not a conforming solution.

  Read the article

• Receiving and processing SMS messages through a script?

  - by ShankarG

  I am attempting to setup a system to receive and process SMS messages automatically. The system is intended for use in a context (an unfunded migrant workers' union in India) where both finances and sysadmin skills are extremely constrained (I would be the only person, in the near future, who would be administering the system). The intention is to make some functions - registration of members, generation of ID cards, communication of alerts and other information - easier. However, for receiving and sending SMS, I have not been able to find any email to SMS or other kind of gateway that functions in India. Perhaps there is one (edit: apparently Clickatell does have an India service, but the prices appear astronomical). If not, can one rely on a USB mobile modem (such as those provided by many mobile providers in India)? It seems like, with utilities such as gammu or bitpim, SMS operations on such a modem could be scripted. Is this actually feasible, though? Thanks in advance for your thoughts and suggestions. edit: Original first question removed since the two questions had little to do with each other. The original first question has been asked separately here

  Read the article

• WINDOWS 7: Make the contents of two folders appear in one

  - by big_smile

  In Windows 7, I have three folders: "Images", "assets" and "all". I want the contents of "Images " and "assets" to appear in "all" automatically without copying those files into that folder (e.g. I don't want to duplicate the files). I also only want the contents to be copied over and not the folders themslves (The reason for this is that if the folders are copied over, they will become sub-directories. I am using a printing hot folder that access "all" but it can't see any subdirectories in "all"). When Images and Assets are updated (e.g. with files being added or deleted), "all" should automatically update as well. How can I do this? This is what I have tried: Libraries: This is a feature built into Windows. It works exactly as I want. However, the print hot folder cannot recognise the library as a folder. Sym Link Extension: I can use this to make the "images" and "assets" folders appear as a sub directories of "all". However, I want the contents of "images"/"assets" to appear in the "all" folder (I don't want the directories to appear as sub directories, because as stated, the print hot folder cannot access sub directories).

  Read the article

< Previous Page | 401 402 403 404 405 406 407 408 409 410 411 412  | Next Page >