Search Results

Search found 41573 results on 1663 pages for 'change management'.

Page 411/1663 | < Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >

• Getting packets from one port to another on a Dell PowerConnect 2824 switch

  - by Arvo Bowen

  I have a dell PowerConnect 2824 and I have a cat 5 cable connected from port 1 to port 23. Port 1 is reserved for VLAN 1 (the only VLAN that can manage the switch) and port 18-23 belong to VLAN 112. I currently have the switch setup with ip 10.71.3.5/27 and a test machine plugged into port 22 with IP address 10.71.3.30/27. For some reason I can not ping 10.71.3.5 from my test machine (10.71.3.30). Note: When I try to ping the server plugged into port 21 (IP: 10.71.3.7/27) also VLAN 112, I get responses just fine. Note: When I plug my test machine directly into port 1, I can ping 10.71.3.5 just fine. Quick Recap: Switch IP: 10.71.3.5 Port 1 - dedicated to management - (VLAN1) Port 21 - SERVER (10.71.3.7/27) - (VLAN112) Port 22 - test machine (10.71.3.30/27) - (VLAN112) Port 23 - dedicated to management (to hop over to VLAN 1 from VLAN 112) - (VLAN112)

  Read the article

• Where is a user guide for Alfresco?

  - by C.W.Holeman II

  Where is a user guide for Alfresco like exits for Nuxeo: Nuxeo Document Management: the User Guide

  Read the article

• RHEL Cluster FAIL after changing time on system

  - by Eugene S

  I've encountered a strange issue. I had to change the time on my Linux RHEL cluster system. I've done it using the following command from the root user: date +%T -s "10:13:13" After doing this, some message appeared relating to <emerg> #1: Quorum Dissolved however I didn't capture it completely. In order to investigate the issue I looked at /var/log/messages and I've discovered the following: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering GATHER state from 0. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Creating commit token because I am the rep. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Storing new sequence id for ring 354 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering COMMIT state. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering RECOVERY state. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] position [0] member 192.168.1.49: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] previous ring seq 848 rep 192.168.1.49 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] aru 61 high delivered 61 received flag 1 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Did not need to originate any messages in recovery. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Sending initial ORF token Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] CLM CONFIGURATION CHANGE Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] New Configuration: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] #011r(0) ip(192.168.1.49) Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Left: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] #011r(0) ip(192.168.1.51) Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Joined: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CMAN ] quorum lost, blocking activity Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] CLM CONFIGURATION CHANGE Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] New Configuration: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] #011r(0) ip(192.168.1.49) Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Left: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Joined: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [SYNC ] This node is within the primary component and will provide service. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering OPERATIONAL state. Mar 22 16:40:42 hsmsc50sfe1a kernel: dlm: closing connection to node 2 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] got nodejoin message 192.168.1.49 Mar 22 16:40:42 hsmsc50sfe1a clurgmgrd[25809]: <emerg> #1: Quorum Dissolved Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CPG ] got joinlist message from node 1 Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Cluster is not quorate. Refusing connection. Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Error while processing connect: Connection refused Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Invalid descriptor specified (-21). Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Someone may be attempting something evil. Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Error while processing disconnect: Invalid request descriptor Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering GATHER state from 9. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Creating commit token because I am the rep. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Storing new sequence id for ring 358 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering COMMIT state. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering RECOVERY state. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] position [0] member 192.168.1.49: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] previous ring seq 852 rep 192.168.1.49 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] aru f high delivered f received flag 1 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] position [1] member 192.168.1.51: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] previous ring seq 852 rep 192.168.1.51 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] aru f high delivered f received flag 1 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Did not need to originate any messages in recovery. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Sending initial ORF token Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] CLM CONFIGURATION CHANGE Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] New Configuration: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] #011r(0) ip(192.168.1.49) Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Left: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Joined: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] CLM CONFIGURATION CHANGE Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] New Configuration: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] #011r(0) ip(192.168.1.49) Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] #011r(0) ip(192.168.1.51) Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Left: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Joined: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] #011r(0) ip(192.168.1.51) Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [SYNC ] This node is within the primary component and will provide service. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering OPERATIONAL state. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [MAIN ] Node chb_sfe2a not joined to cman because it has existing state Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] got nodejoin message 192.168.1.49 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] got nodejoin message 192.168.1.51 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CPG ] got joinlist message from node 1 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CPG ] got joinlist message from node 2 Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Cluster is not quorate. Refusing connection. Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Error while processing connect: Connection refused Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Invalid descriptor specified (-111). Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Someone may be attempting something evil. Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Error while processing get: Invalid request descriptor Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Invalid descriptor specified (-21). Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Someone may be attempting something evil. Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Error while processing disconnect: Invalid request descriptor How could this be related to the time change procedure I performed?

  Read the article

• Ho do you view all your monitoring software

  - by BLAKE

  In my office I have all our monitoring tools setup and working great, but I dont have an easy way to view them. I have a large TV in my office plugged into an old PC that has my nagios status page always showing. If I need to change anything on that computer I use Synergy to access the computer from my desktop. We are thinking about adding another TV and I want some suggestions on setting it all up. We are a 99.99% Windows shop. What do you use to run all the TV's in your helpdesk? Synergy works for me, but what if one of the other admins want to change the screen? Is there any easy way that any of us (currently 4 people) can change the screen from our desktops? (Remote desktop doesn't work because it locks the console which is the output to the TVs.) Any advice would help, Thanks.

  Read the article

• Connecting my XBOX 360 to home network

  - by patrick

  I am trying to set up my XBOX 360 as a Windows Media Center Extender. I input the code as shown on the XBOX screen, but I get the error message: "Cannot Set Up Extender." This means that the Extender was found (there's a separate error msg for extender not found), however it can't be set up. Windows points me to this page which tells me to change my router settings to enable multicast and UPnP. My router doesn't have those specific settings but I did open all ports for the XBOX. What is odd about this problem is that it did work, then I restarted my computer and didn't change any settings, and now it doesn't work. I guess something did change, but I can't figure out anything else to try after opening all ports. I'm running Windows 7 and the router is fairly recent (I bought it about six months ago) so it should be able to handle this. The router firmware is up to date.

  Read the article

• Adding new users

  - by user36651

  I have an FTP server that is running Fedora Core release 6 (Zod) the problem is I need to create new users and I have root access saved in WinSCP, so I can run useradd or adduser via the fake terminal, but every time I try to use passwd <username> it crashes on me and won't allow me to change or add a password. my questions are this: --Is there a place the adduser script stores the default passwords? or what is the default? --Is there another way I can set passwords for new users? I don't want to change the root pass because EVERYONE has root access and it's saved in WinSCP (I'm sure you see the problem here...) I want to create User accounts for each user instead of giving them all blatant root access. the goal here is to gradually migrate everyone over to their new account and then change the root p/w. Any suggestions would be greatly appreciated.

  Read the article

• ATI / AMD HIS HD 7870 Graphics card fan speed below 16% / 20% 26%

  - by Thorsten Niehues

  I bought a AMD / ATI HIS HD 7870 to replace my old HD 4870. I noticed that the fan speed does not scale with the temperature: The fan speed does not get below 28% (read from catalyst / automatic fan speed) If I manually change it in the catalyst to 20% then it has the same speed than 28% : about 900-1000 rpm. With HIS iTurbo i manually can change the fan speed below 20%. But I noticed that changing the fan speed below 16% results in 3200 rpm. This is really stupid and annoying since my PC is a ultra silent PC and all fans are running with about 500 rpm when the PC is idle (windows / musik movies, etc.) Is there any way to change the fan speed to a reasonable speed like 500 rpm by software or hardware adapters (I really don't like to put a poti between the 12V line)

  Read the article

• ESXi 5.1 on Poweredge 510 freezes after base-esx update

  - by goober

  Background / Problem Just experienced an issue where an ESXi host was upgraded from 5.0 -- 5.1 perfectly fine. Then, I did a scan and remediated a patch (ESXi510-201210401-BG) Looking into the host on via the kvm switch, this appears to complete successfully. However, on reboot, the server hangs at the "Initializing Power Management" phase. I've read from various spots around the internet that this usually clears itself up again upon a cold boot, but given that our servers are in a different building with different access rules, the less I have to physically go there, the better. :) Question Is there anything I can do to avoid an ESXi host hanging at the "initialize power management" phase of boot after remediating the host to apply patches?

  Read the article

• Why is my HDD not showing up?

  - by Mike

  I'm on Windows 7, got a new 2 TiB NON-external hard disk. When I plug it in it doesn't show up on the Disk Management list in the Computer Management window (that you get by right-clicking My Computer and selecting "Manage"). At first I thought it was broken, but I could see it using a friend's computer. I've run a full disk scan using the official tool from Western Digital, no problems. I've formatted it and partitioned it at another friends place, I've even encrypted the disk fully without any problems, then mounted it and placed a text file on it with the word "hello" inside and saved the file. When I boot my own computer the disk shows up in BIOS. So the disk is not broken. I've tried changing what SATA slot on the motherboard I stick it in. Makes no difference. After all this: Why won't my Windows 7 discover the disk???

  Read the article

• Windows 8 will not load color profiles - why?

  - by Fusilli Jerry

  I have a Spyder3Express color calibration device. Under Windows 7 the utility that came with it would happily load the custom profile I created with it without any hassles. Under Windows 8 (have just upgraded) there is no visible color shift when it says it has loaded the profile. I have gone into the Windows color management settings and when I select any profile and hit 'Set as Default' nothing happens. They all look the same. So Windows doesn't throw an error, but none of the profiles cause any color shifts at all. I have tried a large number of things, such as changing the global color settings for all user accounts and installing other color management software to see if it will load the profiles. The only way I can get a color shift is if I create a profile using Windows built in utility. Profiles created this way change the appearance of the screen, but any downloaded or created profiles make no difference. I am out of ideas. Please help :)

  Read the article

• Wake on Lan/Wan won't work after some time has passsed

  - by Vian Esterhuizen

  I have the following set up: Gigabyte Z77X-UD5H Wake On Lan Enabled Asus N66U Port Forwarding Static IP assigned to my computer Windows 7 Advanced Power Management - PCI Express - Off Intel 82579V - All options under Power Management checked I'm trying to set this up for Wake on Wan capabilities. If I shut down my computer and immediately try to Wake on Wan (and Lan) it works and starts up. While the computer is on, I've used a few WOL specific packet sniffers and the packet comes through on the correct port. After any period of time over a few minutes, waking on Wan or Lan won't work. The back "activity" light is blinking on my ethernet port on my computer, as well as on the router, so I would assume the network card is on and able to receive a signal. Any ideas? Suggestions? What can I do to troubleshoot the problem?

  Read the article

• Running Mac OS X 10.6 my users home directory is wrong

  - by Erik Miller

  Somehow my home directory on my Mac has been changed and I'm not sure how to go about changing it back, I'm more of a linux guy and Mac OS X has some other mechanism for storing that information. Basically when I log into the machine normally than start a terminal window. I start in the /Users/erik_miller directory, which is my home directory, but when I run some this like cd ~ The machine tries to change to /Users/erik_miller. Yes, the same path with a period on the end. I can change my $HOME environment variable for the session, but the next time I start the machine it reverts. So, I think if I can find where that information is stored I can just change it there and hopefully all will be well.

  Read the article

• Any ideas for automatic initial/scripted configuration of a NetApp?

  - by maddenca

  The background is to make a solution where we can automate as much as possible the building up of ‘pods’ that include server/network/storage and that will be built at remote sites. In an ideal world would be that we create a single management server which is preconfigured with DHCP/TFTP/or whatever. This management server is racked with a CISCO UCS, FAS31x0, etc. at a build site and is then transported to the final customer site where on power it almost configures itself, or at least bootstraps itself far enough that a remote skilled 'expert' can complete the setup of the pod. Ideas (doesn't have to resemble 100% of the above) would be helpful.

  Read the article

• Virtualised Sharepoint Backup Strategies

  - by dunxd

  I have a Sharepoint (OSS 2007) farm running on three virtual machines in VMWare ESX, plus a SQL Server backend on physical hardware. During a recent Business Continuity Planning event I tried restoring the sharepoint farm with only the config and content databases, and failed to get things working. My plan was to build a new sharepoint server, then attach this to a restoration config database and install the Central Management site on this server, then reattach the content databases. This failed at the Central Management part of the plan. So I am back to the drawing board on the best strategy for backup and recovery, with reducing the time and complexity of the restore job the main objective. I haven't been able to find much in the way of discussion of backup/restore strategies for Sharepoint in a VMWare environment, so I figured I'd see if anyone on server fault has any ideas or experience.

  Read the article

• Hard link not works under MacOS in GUI mode

  - by AntonAL

  Hi, i faced a little strange behavior, while using hard links. From terminal, i create a text file 1.txt and a hard link "to this file" nano 1.txt mkdir dir ln 1.txt ./dir/ I check the resulting hard link and see that its contents are the same as of the original file. less ./dir/1.txt I change the initial file ... nano 1.txt ... and see, that changes was reflected in hard-link less ./dir/1.txt I change content of hard-link (more correct, of course - file, being referenced with hard-link) ... nano ./dir/1.txt ... and see, that changes are reflected in initial file less 1.txt Until now, all going well... Now, I close terminal and start playing with created files (1.txt and ./dir/1.txt) from Finder. When i change on this two files with TextEdit, changes are not reflected in another file. Just like the hard link was teared off... What is going on here ?

  Read the article

• VLC opening direct 3d output windows

  - by FrozenKing

  As you can in this above image there are two windows of vlc player, I just want to get rid of the other vlc direct3d output window. VLC version is latest i.e. 2.0.1. If I change the video output to some other also; this thing doesn't change. Only the title changes i.e. now it is direct3d output then it will change to openGL or as per the selected output video option. This happens when I play *.mov files.

  Read the article

• USB to IDE/SATA adapter

  - by unknown (google)

  I have an old IDE HDD that I am trying to pull files off of. I am using a USD to IDE/SATA adapter. I plug in the power and adapter plugs into the drive and it fires up. I plug the USB plug into my XP laptop and it installs the drivers. I can see USB Mass Storage Device under Device Manager. My problem is I can't see the drive in either Windows Explorer or under Disk Management under Computer Management. Not sure what I am doing wrong. Do I have to slave the old hdd? Do I have to make BIOS changes?

  Read the article

• How to remove blank lines in .txt file

  - by Brant

  I want to change text file format as following , but don't know how to do (2) 5. The function of the condenser is to: a) vapourise the liquid refrigerant b) change high pressure refrigerant vapour to liquid c) pressurise low pressure refrigerant vapour d) vent off vapourised refrigerant e) lower the liquid refrigerant pressure (2) 6. One tonne of refrigeration is: a) 13958 kJ per day b) 100 kJ per minute c) 233 kJ per minute d) 13958 J per hour e) 335 J per second (2) 5. The function of the condenser is to: a) vapourise the liquid refrigerant b) change high pressure refrigerant vapour to liquid c) pressurise low pressure refrigerant vapour d) vent off vapourised refrigerant e) lower the liquid refrigerant pressure (2) 6. One tonne of refrigeration is: a) 13958 kJ per day b) 100 kJ per minute c) 233 kJ per minute d) 13958 J per hour e) 335 J per second

  Read the article

• When a python process is killed on OSX, why doesn't it kill the child processes?

  - by Hugh

  I found myself getting very confused a while back by some changes that I found when moving Python scripts from Linux over to OSX... On Linux, if a python script has called os.system(), and the calling process is killed, the called process will be killed at the same time. On OSX, however, if the main process is killed, anything that it launched is left behind. Is there something somewhere in OSX/Python where I can change this behaviour? This is causing problems on our render farm, where the processes can be killed from the management GUI, but the top level process is really just a wrapper, so, while the render farm management might think that the process has gone and the machine is freed up for another task, the actual processor-intensive task is still running, which can lead to huge blockages. I know that I could write more logic to catch the kill signal and pass it on to the child processes, but I was hoping that it might be something that could be enabled at a lower level.

  Read the article

• Backup Client/Server Software that Syncs only the Delta?

  - by Urda

  I have a co-located server, and a desktop computer. I push small things and large ammounts of small files (like my iTunes) into a JungleDisk cloud. If a few files change there, no big deal, the file gets re-uped. For larger files JungleDisk backup isn't helpful. Things like movies and VMware images that change a lot, but I want backed up. Just not to JungleDisk since that would cost me even more money. I am looking for a product, closed or open source (preferably open source) that will sync the change, or delta, to my personal server on a schedule. That way I can keep a copy of my larger things, without paying JungleDisk a ton more since they are in the range of many Gigabytes. Right now these few items are backed up over FTP, and take forever. Both the client and server are windows environments.

  Read the article

• My VPS Server's TimeZone always resets on reboot - Why?

  - by GenericTypeTea

  I'm using a VPS running Virtuozzo Containers with Parallels. Every time I reboot it sets the server's TimeZone to GMT+01 Amsterdam. If I change that to GMT+00 London and then reboot, it gets set back to Amsterdam again. Is there any way I can prevent this? I'm also have a very strange issue whereby .Net is reporting that the DateTime.Now as the +01 Amsterdam time instead of +00 GMT, even after I've change it to London's TimeZone. Is there somewhere else I need to change the TimeZone apart from in the Timezone tab under the system clock?

  Read the article

• ZFS and SAN -- best practices?

  - by chris

  Most discussions of ZFS suggest that the hardware RAID be turned off and that ZFS should directly talk to the disks and manage the RAID on the host (instead of the RAID controller). This makes sense on a computer with 2-16 or even more local disks, but what about in an environment with a large SAN? For example, the enterprise I work for has what I would consider to be a modest sized SAN with 2 full racks of disks, which is something like 400 spindles. I've seen SAN shelves that are way more dense than ours, and SAN deployments way larger than ours. Do people expose 100 disks directly to big ZFS servers? 300 disks? 3000 disks? Do the SAN management tools facilitate automated management of this sort of thing?

  Read the article

• Is there a browser addon to redirect a link to another, modifying some address content automatically?

  - by kokbira

  Well, I'm looking for an addon that can redirect a link when I click on it in the following ways: Change from https to http Change from twitter.com/xxxxxxxxx to, for example, dabr.co.uk/xxxxxxxxx (added at 2010-02-15th, 20:30 GMT) Remove the "?utm_source=twitterfeed&utm_medium=twitter" from the end ou a URL Generally, replace a string with another (e.g. youtube->yt; so www.example.com/visitingyoutube would become www.example.com/visitingyt) PS: (added at 2010-02-15th, 20:30 GMT) @oKtosiTe, a clearer user case: Supposes that there is a link in Twitter that point to a URL X (URL X is http://www.newspapersite.com/2011-02-15_1304.html?utm_source=twitterfeed&utm_medium=twitter) In that case, I want to open that URL only until ".html", i.e., I want to open a URL Y, that is http://www.newspapersite.com/2011-02-15_1304.html What happens when I click normally in that link: 3.1. Browser goes to URL X What I want to happen when I click in that link: 4.1. The addon must transform URL X to URL Y (I must configure it before to change a piece of URL from "?utm_source=twitterfeed&utm_medium=twitter" to "" 4.2. The browser goes to URL Y

  Read the article

• SQL Server Installer Closes Silently Without Errors

  - by ashes999

  When I run the SQL Server 2008 R2 Express installer (32-bit or 64-bit), nothing happens. It will get to the screen where it asks me to accept the terms of license and send anonymous feedback; I check off both boxes and click Next, and it automatically starts installing the Support Files. And then the window disappears. I tried looking through the log files, but didn't see any errors. I've tried: x64 SQL Server R2 express x86 SQL Server R2 express X64 SQL Server R2 (full) X64 SQL Server Management Studio Of these, only management studio installed correctly; the two express editions failed silently, and the full version gave me different errors. I also tried running in Administrator mode (despite being logged in as an administrator user), but again, no difference.

  Read the article

• Windows 7 Bootcamp to see data doubler SATA SSD in Optical Bay Connector

  - by bumble_bee_tuna

  Hi I purchased a OWC data doubler http://eshop.macsales.com/item/OWC/DDAMBS0GB/ ... Long story short it lets you add a second HD to your macbook pro in place of the cd/dvd drive (which is useless anyway, impossible to get stuff out when stuck). My current setup is 600gb intel SSD bootdrive 100gb partition for OSX / 500gb for Windows 7 Prof from Bootcamp (use 99 % of time). My desire is to have a second 300gb SSD to run disk intensive VM's off of. So I added a second 300gb intel SSD (again, NO desire to boot off of) on the sata optical port. I can see the drive no problem if I boot in to OSX, however, can't see it in disk management on Win7 ??? Any ideas similar experience ... Funny thing is I can see it in "Device Manager Disk Drivers" but not Disk Management ??? Also no I don't want to use Fusion/Parallels this is a waste of resources for me.

  Read the article

< Previous Page | 407 408 409 410 411 412 413 414 415 416 417 418  | Next Page >