Search Results

Search found 13425 results on 537 pages for 'android wifi'.

Page 419/537 | < Previous Page | 415 416 417 418 419 420 421 422 423 424 425 426  | Next Page >

• Computer won't stay powered up

  - by Android

  I have just tried to turn my PC on this morning and it won't stay powered up. It will come on as normal for about 5 seconds, not quite long enough for the monitor to wake up. Then it will power off. After about 2 seconds it will start again, it will continue like this until I pull out the plug. Plugging it in again doesn't restart the cycle although pressing the power button does. I have tried to clear the cmos but beyond that I have no ideas. It was working perfectly when I put it in hibernate last night.

  Read the article

• Computer won't stay powered up

  - by Android

  I have just tried to turn my PC on this morning and it won't stay powered up. It will come on as normal for about 5 seconds, not quite long enough for the monitor to wake up. Then it will power off. After about 2 seconds it will start again, it will continue like this until I pull out the plug. Plugging it in again doesn't restart the cycle although pressing the power button does. I have tried to clear the cmos but beyond that I have no ideas. It was working perfectly when I put it in hibernate last night. NOTE: I am using a Dell Optiplex 755 UPDATE 1: I took out the motherboard battery and it almost came on then it displays the message Error loading Operating System UPDATE 2: After taking out the custom video card, it says "No hard drive present"

  Read the article

• Access a samba mount from an ssh connection

  - by Android

  I have Ubuntu 9.10 on my computer. I have made a samba mount to a windows computer. This works fine when I am on the Ubuntu computer directly. When I go to another computer and connect to Ubuntu with SSH. I can connect fine and everything works but the folder my mount is in appears empty. I have only 1 account and it has permissions on the file etc. When on the computer directly it all works perfectly, it is only when connecting with SSH that isn't visible. What am I doing wrong here? I made the mount with smbmount //computer/folder mount -o username=username,password=password Even if I run this command on the SSH connection then it is the same, visible on the computer directly but not on SSH.

  Read the article

• Google document does not print correctly on Mac 10.7.5 using Chrome

  - by Android Addict

  When attempting to print a Google document, the header does not get printed at all and the text starts almost in the center of the page - cutting off almost half of the text in the printable area horizontally. The vertical alignment appears fine, with the exception of hte missing header. I have searched the product forums at Google, but they are virtually unusable. Endless threads without a solution! For reference, the document prints fine from Windows XP using Chrome. I can also print from other applications on the Mac without issue - so I am thinking it's a Google doc issue at this point.

  Read the article

• python interval

  - by Apache

  hi expert, i've dev code for wifi scanning in python, now i trying to modify my code so it will scan wifi at specific interval, how this can be done thanks

  Read the article

• scrollable text view with 2 buttons not being displayed using xml layout

  - by rajyalakshmi

  Hi Everyone, the following is my xml layout for scrollbale text view with 2 buttons.But with this i am able to see only text but not the buttons.Howvever if i put smaller text and make it simple text view(without scroll),the buttons are being seen.Can anyone help me to able to get scrll text view in a window with 2 bottoms at the bottom. <Button android:id="@+id/button1" android:layout_width="wrap_content" android:layout_height="fill_parent" android:text="@string/my_button_text1" /

  Read the article

• W006.15 isp or T-mobile Network Error.

  - by Mike Koerner

  I just bought a new T-Mobile G2.  I wanted to turn on Wifi calling but kept receiving "W006.15 isp or T-mobile Network Error" and asking me to register.  After doing some research I looked at my cable modem/router logs and config.  There were fragmented packets originating from the phone and the incoming fragmented packets were blocked.  I disabled the "Block fragmented packets" setting and the phone was able to connect for Wifi calling

  Read the article

• Multiple site URLs now showing up in SERPs

  - by Scott Helme

  Recently when you search for me on Google several URLs from my blog have started showing up, instead of just the main URL. 1) https://scotthelme.co.uk/ 2) https://scotthelme.co.uk/category/wifi-pineapple-2/? 3) https://scotthelme.co.uk/wifi-pineapple-karma-sslstrip/ Is there a reason this starts happening? I have contemplated doing something to remove them but is it better to occupy the top 3 spots instead of just the top spot? Should I just leave them there?

  Read the article

• How to get D-Link DWA-547 working on Ubuntu 13.10?

  - by Tan Kah Ping

  I got a D-Link DWA-547 Wifi card which is supposed to work out-of-the-box with Linux. Says so here: http://wireless.kernel.org/en/users/Drivers/ath9k/products/external While lspci does list the device, NetworkManager doesn't seem to allow me to configure Wifi. lsmod also shows that ath9k isn't loaded. Manually loading with 'modprobe ath9k' doesn't help. How do I get this card working on Ubuntu 13.10 64-bit?

  Read the article

• Wireless keeps asking for password

  - by Lewis

  Hia I just installed 12.04 on my old ibook G3 (since i wiped the HDD) Now luckely i have a wifi-ethernet bridge on my pc to give the ibook intertnet but even when it is connected to eth0 (LAN) it keeps asking to connect to eth1(Wi-Fi) the router is using WPA2 Personal with AES I was just wondering, bescuse the router is upsatirs and the ibook is downstairs next to my PC. and the wifi connects upstairs, but I can't use it up there 'cos the batteiy is junk and i got no plugs that'll reach. Thanks in advance Lewis

  Read the article

• ubiquity "hangs" on first step

  - by bumbling fool

  Trying to install 11.04 daily for the last couple days but, no matter what I try (wifi connected, wifi not connected, disk blank, disk prepartitioned...), if just "hangs" at the first window (pick your language) with a non-stop hourglass after hitting next. I ran into a different issue when trying to use the alternate installer image. This is on a Stinkpad T42. Should ubiquity at least tell me whats going on?!? I tried to find a log but /var/log/installer* isn't present.

  Read the article

• How to connect to a serverside process on Ubuntu running in a VM?

  - by Jenko

  I am running Ubuntu 11.10 in VirtualBox, on Windows 7. I'm trying to setup a serverside process like Apache on it. How do I configure VirtualBox to allow access to the Ubuntu server process from other computers on the network? I can access the internet from Ubuntu. The Windows 7 computer is on a WiFi network using DHCP. The WiFi network has a dynamic IP with the network provider. This is my current configuration:

  Read the article

• Wireless is disabled by hardware switch on Dell Inspiron 1750

  - by lowerkey

  I have a problem where Ubuntu (12.04) says there is a wireless network card, but it is disabled by a hardware switch. How do I turn it on? I checked the BIOS, and the wireless card is enabled there. Fn + F2 was also no success. The results of rfkill list: 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes 1: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes sudo rfkill unblock wifi did nothing to the Wireless Status.

  Read the article

• iwlwifi on lenovo z570 disabled by hardware switch

  - by Kevin Gallagher

  It was working fine with windows 7. The hardware switch is not disabled. I've toggled it back and forth dozens of times. The wifi light never turns on and it always lists as hardware disabled. I have the latest updates installed. I've been searching for solutions, but none of them seem to work for me. I've tried removing acer-wmi. I've tried setting 11n_disable=1. I've tried resetting the bios. I've tried using rfkill to unblock (only removes soft block). I've rebooted dozens of times. The wifi light turns off as soon as grub loads. Edit: I have a usb edimax wireless nic. It shows hardware disabled as well (although rfkill lists as unblocked). If I unload iwlwifi the usb nic works fine. uname -a `Linux xxx-Ideapad-Z570 3.2.0-55-generic #85-Ubuntu SMP Wed Oct 2 12:29:27 UTC 2013 x86_64 x86_64 x86_64 GNU/Linu`x rfkill list 19: phy18: Wireless LAN Soft blocked: no Hard blocked: yes dmesg [43463.022996] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [43463.023002] Copyright(c) 2003-2011 Intel Corporation [43463.023107] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [43463.023190] iwlwifi 0000:03:00.0: setting latency timer to 64 [43463.023253] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000 [43463.023257] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057c8000 [43463.023261] iwlwifi 0000:03:00.0: HW Revision ID = 0x0 [43463.023797] iwlwifi 0000:03:00.0: irq 43 for MSI/MSI-X [43463.024013] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [43463.024250] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [43463.045496] iwlwifi 0000:03:00.0: device EEPROM VER=0x15d, CALIB=0x6 [43463.045501] iwlwifi 0000:03:00.0: Device SKU: 0X50 [43463.045504] iwlwifi 0000:03:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [43463.045542] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [43463.045744] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio. [43463.047652] iwlwifi 0000:03:00.0: loaded firmware version 39.31.5.1 build 35138 [43463.047823] Registered led device: phy18-led [43463.047895] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [43463.048037] ieee80211 phy18: Selected rate control algorithm 'iwl-agn-rs' [43463.055533] ADDRCONF(NETDEV_UP): wlan0: link is not ready nm-tool State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: unavailable Default: no HW Address: 74:E5:0B:4A:9F:C2 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points lshw -C network *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 [Condor Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 74:e5:0b:4a:9f:c2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-55-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:43 memory:f1500000-f1501fff lspci 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak]

  Read the article

• Toshiba wireless is blocked

  - by zorrillo

  I have the same problem, a 32 bits toshiba nb255, it first had the windows 7 bu next I installed the ubuntu 11.04. The wifi does not turn on. I used the following issues the commands rfkill unblock wlan0, sudo ifconfig wlan0 down; they were not able. by setting up the bios in advanced menu, the wireless communication sw in ON, but it did not work also. neither the utilities toshiba nor utilities of ubuntu (wicd, wifi radar). by using gedit to file group, nothing. by installing madwifi packet, nothing. by exporting the wifi driver from windows to ubuntu, by means of the NDISwrapper packet, neither. I put the current scripts of the ouput of the cli root@zorrillo:~# rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes root@zorrillo:~# sudo lspci | grep Atheros 07:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) root@zorrillo:~# root@zorrillo:~# ifconfig -a eth0 Link encap:Ethernet direcciónHW 88:ae:1d:47:df:e1 ACTIVO DIFUSIÓN MULTICAST MTU:1500 Métrica:1 Paquetes RX:0 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:0 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:0 (0.0 B) TX bytes:0 (0.0 B) Interrupción:43 Dirección base: 0xe000 lo Link encap:Bucle local Direc. inet:127.0.0.1 Másc:255.0.0.0 Dirección inet6: ::1/128 Alcance:Anfitrión ACTIVO BUCLE FUNCIONANDO MTU:16436 Métrica:1 Paquetes RX:8 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:8 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:0 Bytes RX:480 (480.0 B) TX bytes:480 (480.0 B) ppp0 Link encap:Protocolo punto a punto Direc. inet:189.203.115.236 P-t-P:192.168.226.1 Másc:255.255.255.255 ACTIVO PUNTO A PUNTO FUNCIONANDO NOARP MULTICAST MTU:1500 Métrica:1 Paquetes RX:6384 errores:30 perdidos:0 overruns:0 frame:0 Paquetes TX:6893 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:3 Bytes RX:5473081 (5.4 MB) TX bytes:974316 (974.3 KB) wlan0 Link encap:Ethernet direcciónHW 00:26:4d:c3:d0:44 DIFUSIÓN MULTICAST MTU:1500 Métrica:1 Paquetes RX:0 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:0 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:0 (0.0 B) TX bytes:0 (0.0 B) note.-it is logical all the counters are cero if the wireless device is down root@zorrillo:/home/zorrillo/Descargas/802BGA# ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill root@zorrillo:/home/zorrillo/Descargas/802BGA# It would seem the wireless switching does not react with whichever ubuntu 11.04 command (I hope to be wrong). The target remains the same, in order of the scripts above. I am worried, I have tried to find any answer for days and nights. Toshiba does not supply drivers or soft support for linux, marketing of course. I only see the device is up by protocols and down phisically, My question is, is it possible to enable or not shutdown physically the device?, because in the toshiba model nb255 the wifi is not set up/down bye means of a physical switch, but by means a combination of Fn + F8 (only for windows 7, no one more), Is there one possibility to configure the hot keys in ubuntu?

  Read the article

• Can't ping devices by IP address for devices allocated IPs by DHCP

  - by GiddyUpHorsey

  I have a home network with a Trendnet wireless router and a Windows Domain. The Domain Controller/DNS server is a Windows 2000 Server and is configured to forward queries to DNS servers provided by the ISP. The router provides DHCP and is configured with the Windows 2000 Server as the DNS server. The network has been set up for a couple of years and usually works fine. When I connect iPhones to the network over WiFi, the router can ping the iPhones through its browser based admin interface, but Windows machines that are part of the Windows Domain cannot. A laptop was connected to the network over WiFi that wasn't joined to the domain and it could see the iPhones. The router UI shows that the laptop has a reserved IP allocated via DHCP. All machines either have a static or DHCP allocated IP on the 192.168.0.* subnet. Router - 192.168.0.1 - Static - Wired Windows Domain Controller - 192.168.0.8 - Static - Virtual Windows 7 Workstation - 192.168.0.200 - DHCP Auto - Wired VMWare ESXi Host - 192.168.0.201 - Static? - Wired iPhone 1 - 192.168.0.202 - DHCP Auto - WiFi iPhone 2 - 192.168.0.203 - DHCP Auto - WiFi Windows Vista Laptop - 192.168.0.204 - DHCP Reserved - WiFi Using the Windows 7 machine (200), I try to ping each machine and the only DHCP machine that responds is itself. The other DHCP machines fail with Reply from 192.168.0.200: Destination host unreachable.. Using nslookup fails with *** domain.controller.name can't find 192.168.0.203: Non-existent domain. Using the Windows 2000 Domain Controller (8), I try to ping each machine and the only DHCP machine that responds is the Windows 7 machine (200). Pinging the other DHCP machines fails with Request timed out.. Using nslookup also fails with *** domain.controller.name can't find 192.168.0.203: Non-existent domain. Using the iPhone 2 (203), I try to ping (Network Ping Lite) the machines with static IP addresses and that works fine. When I try to ping the Windows 7 machine (200) it is unable to get a response. How do I configure the DNS server/Windows Domain/Router properly so that the Windows Domain machines can see the IPs allocated via DHCP?

  Read the article

• Limit bandwith on network of computers

  - by Joseph34123

  We have network in office of approximately 10 computers sometimes when someone downloads something for work (e.g. syncing email with an attachment or Dropbox), everyone slows down. I could limit each computer in office but the problem is that we have an open WiFi network, and I cannot access the computers that use it. We have one main DSL router "Netopia 3347" and another router connected to it on wire for public wifi is "Linksys WRT110". I cannot change the setup we have and don't want to. There's 2 approaches here: Set office computers download limit in each computer and then I need to find out how I can set a download limit for the wifi network such as in the router settings. It's a Linksys router and I did not see the option for this, so maybe I need new router for WiFi? Don't bother with each computer and put some "specific hardware" or another computer before router so all traffic goes trough it and I can then assign priority maximum speed for each IP address. Question is what hardware do I need?

  Read the article

• How to use the AWUS036H on MacBook Pro with Lion and Backtrack in VM?

  - by Swader

  I have the AWUS036H USB WiFi adapter and have recently upgraded the OSX to Lion. The thing is, there are no drivers for Lion for the AWUS036H, and I would have to boot into 32bit mode every time I want to launch the adapter as per instructions here: http://www.youtube.com/watch?v=n9_HAGi1ce0 I also want to install BackTrack as I deal in networks a lot for my company. While this would be a simple matter on any other laptop, the company issued Macbook does not allow booting into any OS other than MacOSX or Windows with Bootcamp. Now, since dual booting into BT is not an option, I would like Backtrack to run in VM inside my MacOSX Lion - and this it does. It works like a charm inside VirtualBox. But since there are no 64bit drivers for the wifi adapter, Lion doesn't recognize it and cannot install it. This, in turn, means that Backtrack cannot see it even though AWUS036H usually works flawlessly with BT. How can I make my VM-based BT see the wifi adapter even if the parent OS doesn't see it, if at all? Is there a way, or am I better off buying a new WiFi adapter that supports OSX 10.7 such as the AWUS036NHR?

  Read the article

• All application passwords lost on Windows 7

  - by Rynardt

  A couple of days ago I changed my Windows 7 login password. My laptop is on my company's domain, so password changes are done over the internal network. Since changing the password I noticed that all my saved Chrome passwords are missing. Also Skype, Windows Live, Internet Explorer and Outlook lost their saved passwords. I guess there could be more applications with lost passwords, but I have not opened them yet. This makes me think that most applications saves their passwords to a general password vault on the Windows system and this vault got somehow corrupted when I changed my domain login password for windows. Do anyone have any idea of how to fix this and prevent it from happening again? EDIT : More Info I do development work at the office, so most of the time I bypass the firewall and connect directly to the internet gateway. Now and then I would connect to the company wifi network to do printing and access files on a NAS. So by default my laptop does not connect to the wifi hotspot. On this occasion to update the password, I had to connect to the wifi. So referring to the comment by OmnipotentEntity below, could this have happened when the system rebooted without a connection to the network as the laptop does not auto connect to the wifi hotspot?

  Read the article

• Configuring network route between two routers on home network

  - by Paul

  I have a home network - the main router connected to the internet (and has wifi) is a Netopia box. Connected to it is a Linksys router. Everything currently works - I can connect via the wireless network and get to the internet. Machines connected to the Linksys can connect with each other and connect to the internet. Both routers are configured to serve addresses via DHCP (Netopia 192.168.1.1 - 192.168.1.99), Linksys (192.168.0.1 - 192.168.0.100). Here's how they are connected: Internet <-> Netopia w/wifi (192.168.1.254) <-> Linksys (192.168.0.1) I decided I really need to allow wireless connections to also communicate with machines behind the Linksys router. Currently the Linksys is configured to obtain an IP address via DHCP. I thought this would be straightforward. I configured the Linksys to have a static IP address: IP: 192.168.1.100 Mask: 255.255.255.0 GW: 192.168.1.254 Then I configured a static route on the Netopia: Network: 192.168.0.0 Mask: 255.255.255.0 GW: 192.168.1.100 So it should now look like this: Internet <-> Netopia w/wifi (192.168.1.254) <-> (192.168.1.100) Linksys (192.168.0.1) I reset both routers. I cannot ping the Netopia (192.168.1.254) from inside the Linksys network, and if I attempt to ping 192.168.0.1 from a wifi connection I get a "Destination host not available" error. Obviously I'm missing something, but I'm not sure where. Any ideas on what I'm missing?

  Read the article

• How to change theme for AlertDialog.

  - by Min Soo Kim

  Hello everyone, I was wondering if someone could help me out. I am trying to create a custom AlertDialog. In order to do this, I added the following line of code in styles.xml @drawable/color_panel_background color_panel_background.9.png is located in drawable folder. This is also available in Android SDK res folder. The following is the main activity. package com.customdialog; import android.app.Activity; import android.app.AlertDialog; import android.app.Dialog; import android.content.DialogInterface; import android.os.Bundle; public class CustomDialog extends Activity { /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); this.setTheme(R.style.CustomAlertDialog); AlertDialog.Builder builder = new AlertDialog.Builder(this); builder.setMessage("HELLO!"); builder .setCancelable(false) .setPositiveButton("Yes", new DialogInterface.OnClickListener() { public void onClick(DialogInterface dialog, int id) { //MyActivity.this.finish(); } }) .setNegativeButton("No", new DialogInterface.OnClickListener() { public void onClick(DialogInterface dialog, int id) { //dialog.cancel(); } }); AlertDialog alertdialog = builder.create(); alertdialog.show(); } } In order to apply the theme to an AlertDialog, I had to set the theme to the current context. However, I just can't seem to get the app to show customized AlertDialog. Can anyone help me out with this, and thank you very much in advance!

  Read the article

• C# Java Objective-C need expert advices

  - by Kevino

  Which platform as the edge today in 2012 with the rise of cloud computing, mobile development and the revolution of HTML5/Javascript between J2EE, .Net framework and IOS Objective-C ??? I want to start learning 1 language between Java, C# and Objective-C and get back into programming after 14 years and I don't know which to choose I need expert advices... I already know a little C++ and I remember my concepts in example pointers arithmetic, class etc so I tend to prefer learning C# and Objective-C but I've been told by some experienced programmers that Windows 8 could flop and .Net could be going away slowly since C++ and Html5/Javascript could be king in mobile is that true ? and that C# is more advanced compared to Java with Linq/Lambda... but not truly as portable if we consider android, etc but Java as a lot going for him too Scala, Clojure, Groovy, JRuby, JPython etc etc so I am lost Please help me, and don't close this right away I really need help and expert advices thanks you very much ANSWER : ElYusubov : thanks for everything please continue with the answers/explanations I just did some native C++ in dos mode in 1998 before Cli and .Net I don't know the STL,Templates, Win32 or COM but I remember a little the concept of memory management and oop etc I already played around a little with C# 1.0 in 2002 but things changed a lot with linq and lambda... I am here because I talked with some experienced programmers and authors of some the best selling programming books like apress wrox and deitel and they told me a few things are likely to happen like .Net could be on his way out because of Html5/Javascript combo could kill xaml and C++ native apps on mobile dev will outperform them by a lot... Secondly ios and android are getting so popular that mobile dev is the future so Objective-C is very hard to ignore so why get tied down in Windows long term (.Net) compared to Java (android)... but again android is very fragmented, they also said Windows 8 RT will give you access to only a small part of the .Net framework... so that's what they think so I don't know which direction to choose I wanted to learn C# & .Net but what if it die off or Windows 8 flop Windows Phone marketshare really can't compare to ios... so I'll be stuck that's why I worry is Java safer long term or more versatile if you want 'cause of the support for android ??

  Read the article

• How's ActionScript 3.0 supported on symbian,android,iphone and windowCE?

  - by user198729

  Anyone knows? To deal with all the things you can do with FMS3, you have two additional language Application Program Interfaces (APIs). Both APIs are extensions of ActionScript and are called Client-Side Media ActionScript and Server-Side Media ActionScript, or in this book, simply as CS ActionScript and SS ActionScript. With ActionScript 3.0, which is also used in this book, the client-side ActionScript has been fully integrated into the language.

  Read the article

• Android: How to handle runtime exception on playing audio files?

  - by Maxood

  I have a button that plays an audio file on its click listener. If the button is clicked again and again while the audio file is being played then the app crashes. What's the solution? Here is some code for reference: private OnClickListener btnMercyListener = new OnClickListener() { public void onClick(View v) { // Toast.makeText(getBaseContext(), // "Mercy audio file is being played", // Toast.LENGTH_LONG).show(); if (status==true) { mp.stop(); mp.release(); status = false; } else { mp = MediaPlayer.create(iMEvil.this,R.raw.mercy); //mp.start(); try{ mp.start(); status= true; //mp.release(); }catch(NullPointerException e) { Log.v("MP error",e.toString()); } } mp.setOnCompletionListener(new OnCompletionListener(){ // @Override public void onCompletion(MediaPlayer arg0) { mp.release(); status = false; } } ); } };

  Read the article

• how subsonic SP should return a value

  - by android.sm

  Hi all, I'm very much new to SubSonic and need a little guidance. Here, I want to know how my SP should return a value. Currently, when I execute it I simply pass an Int and it returns me a string value. Here is code: SubSonic SP: public static StoredProcedure GetQuote(int? CategoryId) { StoredProcedure sp = new StoredProcedure("GetQuote", DataService.GetInstance("Quotes Provider"), "dbo"); sp.Command.AddParameter("@CategoryId", CategoryId, DbType.Int32, 0, 10); return sp; } My Code: public bool GetQuote(int category, out string quote) { bool val = false; quote = ""; try { StoredProcedure sp = SPs.GetQuote(category); if (sp != null) { sp.Execute(); val = true; } } catch (Exception err) { throw err; } return val; } Thanks all

  Read the article

< Previous Page | 415 416 417 418 419 420 421 422 423 424 425 426  | Next Page >