Search Results

Search found 16021 results on 641 pages for 'mr nothing'.

Page 419/641 | < Previous Page | 415 416 417 418 419 420 421 422 423 424 425 426  | Next Page >

• Cannot boot into system after deleting partition

  - by Clayton

  Okay...so this was kind of a stupid thing for me to do now that I think back on it. I was experiencing a ton of lag and not as much memory that I could use after installing Ubuntu 12.04. So after remembering I had installed multiple server versions of Ubuntu 12.04 by mistake, I went into Disk Management and proceeded to delete each and every one. Everything went fine. Up until this week, I have not experienced any problems. But starting yesterday I began to get lag just as I had before, and nothing fixed the problem. I decided to remove the Ubuntu partition, since I was also experiencing a visual error when given the option to select one to boot(the screen doesn't come up at all, and I recieved a monitor resolution error instead, but could still access both Windows and Ubuntu via arrow keys). After deleting the Ubuntu partition, so that I could see if running just Windows would fix the problem, I proceeded with what I was doing, installing a few programs that were not tied to my prediciment in any way. Upon rebooting my desktop, however, I recieved the following error: error: unknown filesystem. grub rescue> Hoping I could boot into Ubuntu via a pendrive and possibly backup my important files and wipe the hard drive to start fresh, I installed Ubuntu 13.04, but even that does not boot. Instead, I get this message on a terminal screen: SYSLINUX 4.06. EDD 4.06-pre1 Copyright (C) 1994-2011 H. Peter Anvin et al ERROR: No configuration file found No DEFAULT or UI configuration directive found! boot: So more or less, my desktop is screwed. I need to be able to get to the files inside because of my job as an artist, as well as retrieve my documents for my stories stored on Windows. Once I can succeed in solving this once and for all, I know for a fact I will stick to Ubuntu only, and install what is required to be able to run any Windows applications I used to use or need to use. I would rather not reformat the hard drive, and if I need to, it is a last resort. And I doubt I can use a Windows Recovery Disk to get my files back, as my mom has thrown out a lot of the installation disks and paperwork I would need to even follow through with that. :\ Keep in mind that I am a novice/newbie when it comes to Linux, but am hoping ot become better at it as time goes by. I appreciate any help you guys can give me. This will probably be the last time I attempt to do anything that could risk the well-being of my PC. (I've also looked through various questions on the site and tested a lot of the solutions. None seem to have worked.)

  Read the article

• Ubuntu 12.04 won't load - hangs at Busybox v1.18.5 / initramfs

  - by Marty

  I want to start by saying that I am very new with Linux (about 1 month using it). I have had no problems up until now. I am running Ubuntu 12.04 from a Toshiba laptop with 250 GB hard drive and 3 GB of ram. Everything worked fine yesterday. The only changes I made was was that I downloaded Banshee to try as a replacement for Rhythmbox and did a few recommended updates. This morning I tried to boot and it took a long time and I finally got this error: mount: mounting /dev/disk/by-uuid/02bc41cc-1e21-4700-a179-be2805a658c4 on /root failed: Invalid argument mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or directory Target filesystem doesn't have requested /sbin/init. No init found. Try passing init= bootarg. BusyBox v1.18. (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands (initramfs) I'm not sure what to do beyond this point. I have read around on here and haven't found the help I need. I did try to boot it from the Live CD. I can boot up to the Try Ubuntu/Install Ubuntu screen. When I go through the Try Ubuntu selection I can't access my hard disk. When I clicked on it I got this error: Unable to mount 247 GB Filesystem Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sda/1, missing codepage or helper program, or other error. In some cases useful info is found in syslog - try dmesg|tail or so. I tried dmesg|tail and saw a string of values but nothing that looked helpful. I have also tried to boot from the GRUB screen as recovery mode and previous Linux version but they didn't work either. I tried to load Windows Recovery Environment (loader) (on /dev/sdc3) and got this message: error: no such device: 268057B1805785E9 error: hd1 cannot get C/H/S values I had saw somewhere that I could fix this with the Live CD but my knowledge isn't good enough to try. I tried something with Gpart that I had read, but the system told me that I didn't have Gpart. Could someone please explain to me what I need to do and/or haven't tried yet. Thanks so much!

  Read the article

• SQL SERVER – Template Browser – A Very Important and Useful Feature of SSMS

  - by pinaldave

  Let me start today’s blog post with a direction question. How many of you have ever used Template Browser? Template Browser is a very important and useful feature of SQL Server Management Studio (SSMS). Every time when I am talking about SQL Server there is always someone comes up with the question, why there is no step by step procedure included in SSMS for features. Honestly every time I get this question, the question I ask back is How many of you have ever used Template Browser? I think the answer to this question is most of the time either no or we have not heard of the feature. One of the people asked me back – have you ever written about it on your blog? I have not yet written about it. Basically there is nothing much to write about it. It is pretty straight forward feature, like any other feature and it is indeed difficult to elaborate. However, I will try to give a quick introduction to this feature. Templates are like a quick cheat sheet or quick reference. Templates are available to create objects like databases, tables, views, indexes, stored procedures, triggers, statistics, and functions. Templates are also available for Analysis Services as well. The template scripts contain parameters to help you customize the code. You can Replace Template Parameters dialog box to insert values into the script. Additionally users can create new custom templates as well with folder structure. To open a template from Template Explorer Go to View menu >> Template Explorer or type CTRL+ALT+L. You will find a list of categories click on any category and expand the folder structure. For our sample example let us expand Index Folder. In this folder you will notice the various T-SQL Scripts. These scripts can be opened by double click or can be dragged to editor area and modified as needed. Sample template is now available in the query editor area with all the necessary parameter place folder. You can replace the same parameter by typing either CTRL+SHIFT+M or by going to Query Menu >> Specify Values for Template Parameters. In this screen it will show  Specify Values for Template Parameters dialog box, accept the value or replace it with a new value. This will now get your script ready to go. Check it one more time and change the script to fit your requirement. I personally use template explorer for two things. First one is obviously for templates but the hidden one and an important one is for learning new features and T-SQL commands. There is so much to learn and so little time. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology

  Read the article

• New hidden parameters in Oracle 11.2

  - by Mike Dietrich

  We really welcome every external review of our slides. And also recommendations from customers visiting our workshops. So it happened to me more than a week ago that Marco Patzwahl, the owner of MuniqSoft GmbH, had a very lengthy train ride in Germany (as the engine drivers go on strike this week it could have become even worse) and nothing better to do then reviewing our slide set. And he had plenty of recommendations. Besides that he pointed us to something at least I was not aware of and added it to the slides: In patch set 11.2.0.2 a new behaviour for datafile write errors has been implemented. With this release ANY write error to a datafile will cause the instance to abort. Before 11.2.0.2 those errors usually led to an offline datafile if the database operates in archivelog mode (your production database do, don’t they?!) and the datafile does not belong to the SYSTEM tablespace. Internal discussion found this behaviour not up-to-date and alligned with RAC systems and modern storages. Therefore it has been changed and a new underscore parameter got introduced. _DATAFILE_WRITE_ERRORS_CRASH_INSTANCE=TRUE This is the default setting´and the new behaviour beginning with Oracle 11.2.0.2 If you would like to revert to the pre-11.2.0.2 behaviour you’ll have to set in your init.ora/spfile this parameter to false. But keep in mind that there’s a reason why this has been changed. You’ll find more info in MOS Note: 7691270.8 and this topic in the current version of the slides on slide 255. Thanks to Marco for the review!!   And then I received an email from Kurt Van Meerbeeck today. Kurt is pretty well known in the Oracle community. And he’s the owner of jDUL/DUDE, a database unloading tool which bypasses the Oracle database engine and access data direclty from the blocks. Kurt visited the upgrade workshop two weeks ago in Belgium and did highlight to me that since Oracle 11.2.0.1 even though you haven’t set neither SGA_TARGET nor MEMORY_TARGET the database might still do resize operations. Reason why this behaviour has been changed: Prevention of ORA-4031 errors. But on databases with extremly high loads this can cause trouble. Further information can be found in MOS Note:1269139.1 . And the parameter set to TRUE by default is called _MEMORY_IMM_MODE_WITHOUT_AUTOSGA=TRUE This can be found now in the slide set as well on slide number 240. And thanks to Kurt for this information!!

  Read the article

• Generating Report for NUnit

  - by thangchung

   All source codes for this post can be found at my github.Time ago, I received a request that people ask me how they can generate reports of the results of testing using NUnit? In fact, I may never do this. In the little world of my programming, I only care about the test results, red-green-refactoring, and that was it. When I got that question quite a bit unexpected, I knew that I could use NCover to generate reports, but reports of NCover too simple, it did not give us more details on the number of test cases, test methods, ... And I began to see about creating interesting report for NUnit.I was lucky to find an open source here. Its authors call it NUnit2Report, but one disadvantage is it only running on .NET 1.0. Indeed too old compared to the current version 4.0. And I try to download the preview, but I could not run. I had to open its source code and found that it uses XSLT to convert the output of NUnit results from XML to HTML. Nothing really special, because I also knew that after NUnit run output file extension is XML is created. Author only use this file to convert to HTML using XSLT. And I decided to convert it to. NET 4.0, because I will not have to code from scratch. Conversion work made me take some time, but was lucky that I finally have what I want. Thanks Gilles for the this OSS. I will send a mail to thank him for his efforts but put this out for the OSS. Now I will show people how to do it. I used the auto built NAnt and NUnit for running TestCase, and I use Selenium testing framework. After writing three TestCase using Selenium, I ran NUnit, and got the following results: There are 1 fail and 2s success. In the bin directory of this project will have the NUnit output file as shown below: Then I create a build file, and a bat file for easy running (can use PowerShell is here also.) Double click in the bat file to create a report like this:       Finally open the index.html file in the folder to view report. As everyone can see, it is the TestCase and divide very clearly, that I meet the requirements. This is really good. Once again I really thank NUnit2Report from Gilles. People can contact him via the mail address [email protected] or website  http://nunit2report.sourceforge.net. It really is useful to those who promised to QA. Hopefully this post will help anyone really interested in doing reports for NUnit.   

  Read the article

• Did I lost my RAID again?

  - by BarsMonster

  Hi! A little history: 2 years ago I was really excited to find out that mdadm is so powerful so it even can reshape arrays so you can start with a smaller array and the grow it as you need. I've bought 3x1Tb drives and made RAID-5. It was fine for a year. Then I bought 2x more, and tried to reshape to RAID-6 out of 5 drives, and due to some mess with superblock versions, lost all content. Had to rebuild it from scratch, but 2Tb of data were gone. Yesterday I bought 2 more drives, and this time I had everything: properly built array, UPS. I've disabled write intent map, added 2 new drives as a spare and run a command to grow array to 7-disk. It started working, but speed was ridiculously slow, ~100kb/sec. AFter processing first 37Mb at such an amasing speed, one of old HDDs fails. I properly shutdown PC and disconnected failed drive. After bootup it appeared it recreated intent map as it was still in mdadm config, so I removed it from config and rebooted again. Now all I see is that all mdadm processes deadlocks, and don't do anything. PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1937 root 20 0 12992 608 444 D 0 0.1 0:00.00 mdadm 2283 root 20 0 12992 852 704 D 0 0.1 0:00.01 mdadm 2287 root 20 0 0 0 0 D 0 0.0 0:00.01 md0_reshape 2288 root 18 -2 12992 820 676 D 0 0.1 0:00.01 mdadm And all I see in mdstat is: $ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid6 sdb1[1] sdg1[4] sdf1[7] sde1[6] sdd1[0] sdc1[5] 2929683456 blocks super 1.2 level 6, 1024k chunk, algorithm 2 [7/6] [UU_UUUU] [>....................] reshape = 0.0% (37888/976561152) finish=567604147.2min speed=0K/sec I've already tried mdadm 2.6.7, 3.1.4 and 3.2 - nothing helps. Did I lost my data again? Any suggestions how can I make it work? OS is Ubuntu Server 10.04.2... PS. Needless to say that data is unaccessible - I cannot mount /dev/md0 as save the most valuable data. You can see my disappointment - the very specific thing I was excited about failed twice taking 5Tb of my data with it.

  Read the article

• Using Movemail with Thunderbird on Ubuntu

  - by rxt

  I'm trying to read local mail with Thunderbird on Ubuntu (with both 12.04 and 13.04). I've followed the instructions found here: How can I access system mail in /var/mail/ via thunderbird? I can read mail on the system using alpine or vim, so I know the mailbox is not empty. When I click the get-mail button, nothing happens. I see no Inbox (or any folder structure) for the specific account. I've set the rights for /var/mail to 1777. Settings server name: localhost username: john How can I get this working? Okay, considering the extra bounty, I would like to get this working like normal mail. The accepted answer from Qasim resulted in a much more usable situation than before - opening mail in Thunderbird with layout. I still face three problems though. When new mail is received in the mailbox, Thunderbird won't see this until after I restart Thunderbird. When Thunderbird is restarted, all mail is reset to unread and deleted mail is undone. This is probably because Thunderbird reads the mail from the /var/mail/www-data file, but doesn't update this file. So after restarting, it simply reads this file again, with the new mail and all old mail. This is probably a postfix issue: mail is sent out to existing mail addresses, but cannot be delivered because the receiving mailserver cannot be reached. This results in "Undelivered mail returned to sender". Only one mailserver can be reached: localhost. Because this is a test system, I don't want real customers to receive mail. I've blocked mail ports in UFW to be sure. When opening the returned mail, I can scroll down and then I see the original mail with proper layout. So I can read the mail, see if the proper images are included, and for me that's workable. Having to restart TB to read new mail - I know when new mail arrives, so I know when to restart. Having old mail restored after a restart - not big problem as well. I can delete the mail file if it gets too much. I know how it works, but it would be nice if it worked like normal.

  Read the article

• Opening cursor files in a graphics editor?

  - by sdaau

  I'm looking at /usr/share/icons/DMZ-White/cursors, and there is: $ tree -s /usr/share/icons/DMZ-White/ /usr/share/icons/DMZ-White/ +-- [ 4096] cursors ¦   +-- [ 14] 00008160000006810000408080010102 -> v_double_arrow ... ¦   +-- [ 5] 9d800788f1b08800ae810202380a0822 -> hand2 ¦   +-- [ 8] arrow -> left_ptr ¦   +-- [ 15776] bd_double_arrow ¦   +-- [ 15776] bottom_left_corner ¦   +-- [ 15776] bottom_right_corner ¦   +-- [ 15776] bottom_side ... ... a bunch of files without extension, that GIMP cannot open. Is there an editor where these files can be opened - or at least a converter to something like .png? I can note that ImageMagick display also failed to open these files... Found also Gursor Maker - Cursor Editor for X11/GTK+; got the CVS code from SourceForge - it still uses Numeric (the old name of numpy), so to run it, you'll have to do: #from Numeric import * from numpy import * ... in xcurio.py, curxp.py, gimp.py, colorfunc.py - and comment the #from xml.dom.ext.reader import Sax2 in lsproj.py. With that, I got it running 11.04: ... but cannot get any files to open? So I thought I should grep for paths, nothing much came up - and when I looked into cursordefs.py, I simply had to paste this: CURSOR_ICON = gtk.gdk.pixbuf_new_from_xpm_data([ "10 16 3 1", " c None", ". c #000000", "+ c #FFFFFF", ".. ", ".+. ", ".++. ", ".+++. ", ".++++. ", ".+++++. ", ".++++++. ", ".+++++++. ", ".++++++++.", ".+++++....", ".++.++. ", ".+. .++. ", ".. .++. ", " .++. ", " .++. ", " .. "]) Heh :) In any case, doesn't look like it will be much usable on newer Ubuntus, unfortunately... Just tested XMC plugin as well - on 11.04, has to be built from source (from the link in the accepted answer); the requirements on my system resolved to: sudo apt-get install libgimp2.0-dev libglib2.0-0-dbg libglib2.0-0-refdbg libglib2.0-cil-dev libgtk2.0-0-dbg libgtk2.0-cil-dev ... after that, the configure/make procedure in the INSTALL file works. Note that this plugin is a bit "sneaky": ... that is, you should use "All files" (as there are no extensions); cursor previews at first will not be rendered. Then open one cursor file; after it has been opened, then there is a preview in the File/Open dialog; but other than that, it works fine...

  Read the article

• Help, i cant reference my vars!

  - by SystemNetworks

  I have a sub-class(let's call it sub) and it contains all the function of an object in my game. In my main class(Let's call it main), i connect my sub to main. (Example sub Code: s = new sub(); Then I put my sub function at the update method. Code: s.myFunc(); Becuase in my sub, i have booleans, integers, float and more. The problem is that I don't want to connect my main class to use my main's int, booleans and others. If i connect it, it will have a stack overflow. This is what I put in my sub: Code: package javagame; import org.newdawn.slick.GameContainer; import org.newdawn.slick.Graphics; import org.newdawn.slick.Input; import org.newdawn.slick.state.StateBasedGame; public class Armory { package javagame; import org.newdawn.slick.GameContainer; import org.newdawn.slick.Graphics; import org.newdawn.slick.Input; import org.newdawn.slick.state.StateBasedGame; public class Store { public Integer wood; public Float probePositionX; public Float probePositionY; public Boolean StoreOn; public Boolean darkBought; public Integer money; public Integer darkEnergy; public Integer lifeLeft; public Integer powerLeft; public void darkStores(GameContainer gc, StateBasedGame sbg, GameContainer gc2) { Input input1 = gc.getInput(); //Player need wood to enter(200) If not there will be an error. if(wood>=200) { //Enter Store! if(input1.isKeyDown(Input.KEY_Q)) { //Player must be in this cord! if((probePositionX>393 && probePositionX<555) && (probePositionY< 271 && probePositionY>171)) { //The Store is On StoreOn=true; } } } } } In my main (update function) I put: Code: s.darkBought = darkBought; s.darkEnergy = darkEnergy; s.lifeLeft = lifeLeft; s.money = money; s.powerLeft = powerLeft; s.probePositionX = probePositionX; s.probePositionY = probePositionY; s.StoreOn = StoreOn; s.wood = wood; s.darkStores(gc, sbg, gc); The problem is when I go to the place, and I press q, nothing shows up. It should show another image. Is there anything wrong???

  Read the article

• A Bad Day at Work

  - by TehGrumpyCoder

  There's lots of ways of having a bad day at work... I suppose for many people, just being *at* work makes it a bad day, but I happen to be one of those people that found a way to do something I like for a living. I've always said "if you're not having fun, what's the point?" ... on the latest Zune podcast, they were interviewing someone from the WP7 team and he said they're mantra is "It's not done until it's fun" ... I like that too. But, even when you're doing what you like for a living, it can get tedious. There were times that I didn't look forward to going out and playing guitar on a Friday or Saturday night, and some nights I was looking at my watch just waiting for it to be over. Well, that was today... like Steve Martin in "The Jerk" ... the first hour was like a regular hour, but then the rest of the morning was like a day, and the afternoon has been like a week. I've got a list of stuff I need to get into my head, and it's tough when the highest technology you have during 9 hours of your day is .NET 2.0 and you can only run what IT installed. I get wrapped around the power take-off reading something and dearly want to write some code to try, but with the state of technology here, it's like trying to teach jazz chords to someone that showed up for their lesson with that stupid plastic guitar from Guitar Hero. I tried to watch a training video... downloaded it zipped so maybe it wouldn't be noticed like it might if I streamed it. Then nothing on this machine would play the video... dang! Well, if someone doesn't take me out on the drive tonight or back in tomorrow, maybe it'll be a better day... or maybe I'll d/l a bunch of training videos in a different format, or bring in a decent viewer, or download them to my Zune maybe... that would work. I suppose at age 61 there are worse things than feeling stifled... for instance, so far I've lived 2 years longer than my father... but at the same time, he's the one that pointed out that in my first letter home from Boot Camp "He's complaining, he's fine"... guess he had my number :) I think he'd appreciate "Teh Grumpy Coder"

  Read the article

• ArchBeat Link-o-Rama for November 8, 2012

  - by Bob Rhubart

  Webcast: Meeting Customer Expectations in the New Age of Retail Keep your eye on this live webcast as Sanjeev Sharma (Principal Product Director, Oracle Exalogic), Kelly Goetsch (Senior Principal Product Manager, Oracle Commerce), and Dan Conway (Senior Product Manager, Oracle Retail) offer real-world examples of business value derived by running customer-facing applications on Oracle Engineered Systems. Live, Thursday Nov 8, 10am PT/ 1pm ET. Solving Big Problems in Our 21st Century Information Society | Irving Wladawsky-Berger "I believe that the kind of extensive collaboration between the private sector, academia and government represented by the Internet revolution will be the way we will generally tackle big problems in the 21st century. Just as with the Internet, governments have a major role to play as the catalyst for many of the big projects that the private sector will then take forward and exploit. The need for high bandwidth, robust national broadband infrastructures is but one such example." — Irving Wladawsky-Berger SOA Still Not Dead: Ratification of Governance Standard Highlights SOA’s Continued Relevance So just about the time I dig into Google Trends to learn that the conversation about governance peaked in 2004, along comes all this InfoQ article by Richard Seroter. And of course you've already listened to the OTN Archbeat Podcast about governance, right? Right? Implications of Java 6 End of Public Updates for Oracle E-Business Suite Users | Steven Chan The short version is: "Nothing will change for EBS users after February 2013." According to Steven Chan, "EBS users will continue to receive critical bug fixes and security fixes as well as general maintenance for Java SE 6." You'll find additional information on Steven's blog. ADF Mobile Custom Javascript – iFrame Injection | John Brunswick The ADF Mobile Framework provides a range of out of the box components to add within your AMX pages, according to John Brunswick. But what happens when "an out of the box component does not directly fulfill your development need? What options are available to extend your application interface?" John has an answer. How Data and BPM are married to get the right information to the right people at the right time | Leon Smiers "Business Process Management…supports a large group of stakeholders within an organization, all with different needs," says Oracle ACE Leon Smiers. "End-to-end processes typically run across departments, stakeholders and applications, and can often have a long life-span. So how do organizations provide all stakeholders with the information they need?" Leon provides answers in this post. Thought for the Day "(When) asking skilled architects…what they do when confronted with highly complex problems…(they) would most likely answer, 'Just use Common Sense.' (A) better expression than 'common sense' is 'contextual sense' — a knowledge of what is reasonable within a given content. Practicing architects through eduction, experience and examples accumulate a considerable body of contextual sense by the time they're entrusted with solving a system-level problem…" — Eberhardt Rechtin (January 16, 1926 – April 14, 2006) Source: SoftwareQuotes.com

  Read the article

• Is this Ubuntu One DBus signal connection code correct?

  - by Chris Wilson

  This is my first time using DBus so I'm not entirely sure if I'm going about this the right way. I'm attempting to connect the the Ubuntu One DBus service and obtain login credentials for my app, however the slots I've connected to the DBus return signals detailed here never seem to be firing, despite a positive result being returned during the connection. Before I start looking for errors in the details relating to this specific service, could someone please tell me if this code would even work in the first place, or if I'm done something wrong here? int main() { UbuntuOneDBus *u1Dbus = new UbuntuOneDBus; if( u1Dbus->init() ){ qDebug() << "Message queued"; } } UbuntuOneDBus::UbuntuOneDBus() { service = "com.ubuntuone.Credentials"; path = "/credentials"; interface = "com.ubuntuone.CredentialsManagement"; method = "register"; signature = "a{ss} (Dict of {String, String})"; connectReturnSignals(); } bool UbuntuOneDBus::init() { QDBusMessage message = QDBusMessage::createMethodCall( service, path, interface, method ); bool queued = QDBusConnection::sessionBus().send( message ); return queued; } void UbuntuOneDBus::connectReturnSignals() { bool connectionSuccessful = false; connectionSuccessful = QDBusConnection::sessionBus().connect( service, path, interface, "CredentialsFound", "a{ss} (Dict of {String, String})", this, SLOT( credentialsFound() ) ); if( ! connectionSuccessful ) qDebug() << "Connection to DBus::CredentialsFound signal failed"; connectionSuccessful = QDBusConnection::systemBus().connect( service, path, interface, "CredentialsNotFound", "(nothing)", this, SLOT( credentialsNotFound() ) ); if( ! connectionSuccessful ) qDebug() << "Connection to DBus::CredentialsNotFound signal failed"; connectionSuccessful = QDBusConnection::systemBus().connect( service, path, interface, "CredentialsError", "a{ss} (Dict of {String, String})", this, SLOT( credential if( ! connectionSuccessful ) qDebug() << "Connection to DBus::CredentialsError signal failed"; } void UbuntuOneDBus::credentialsFound() { std::cout << "Credentials found" << std::endl; } void UbuntuOneDBus::credentialsNotFound() { std::cout << "Credentials not found" << std::endl; } void UbuntuOneDBus::credentialsError() { std::cout << "Credentials error" << std::endl; }

  Read the article

• Friday Fun: Play Your Favorite 8-Bit NES Games Online

  - by Mysticgeek

  We finally made it to another Friday and once again we bring you some NES fun to waste the rest of the day before the weekend. Today we take a look at a site that contains a lot of classic NES games you can play online. vNES VirtualNES.com contains hundreds of vintage NES games you can play online. If you’re old enough to remember, when the NES came out, it breathed life back into home console gaming. Here we will take a look at a few of the games they offer that will certainly bring back memories. Super Mario Bros 3 which is a personal favorite from the 8-bit era.   Play Super Mario Bros 3 Excite Bike was one of the coolest dirt bike racing games at the time as it even allowed you to create your own tracks.   Play ExciteBike Of course The Legend of Zelda was one of the first fantasy games many an hour have been spent on. Play The Legend of Zelda We’d be remiss if we didn’t bring up Pac-man since the game recently celebrated it’s 30th anniversary. Play Pac-Man If you don’t like the default keyboard controls you can change them on the Options page. Join their forum and more…this site will definitely bring you back to the good old 8-bit NES days.   The site contains hundreds of different games for you to get on your old school NES fix. If you’re sick of waiting for the whistle to blow, this site will bring you back to the good old days when you had nothing to do but mash buttons all day. Play NES Games at virtualnes.com Similar Articles Productive Geek Tips Friday Fun: Get Your Mario OnFriday Fun: Go Retro with PacmanFriday Fun: Five More Time Wasting Online GamesFriday Fun: Online Flash Games to Usher in the WeekendFriday Fun: Online Sports Flash Games TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Awesome World Cup Soccer Calendar Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version

  Read the article

• Diving into Scala with Cay Horstmann

  - by Janice J. Heiss

  A new interview with Java Champion Cay Horstmann, now up on otn/java, titled  "Diving into Scala: A Conversation with Java Champion Cay Horstmann," explores Horstmann's ideas about Scala as reflected in his much lauded new book,  Scala for the Impatient.  None other than Martin Odersky, the inventor of Scala, called it "a joy to read" and the "best introduction to Scala". Odersky was so enthused by the book that he asked Horstmann if the first section could be made available as a free download on the Typesafe Website, something Horstmann graciously assented to. Horstmann acknowledges that some aspects of Scala are very complex, but he encourages developers to simply stay away from those parts of the language. He points to several ways Java developers can benefit from Scala: "For example," he says, " you can write classes with less boilerplate, file and XML handling is more concise, and you can replace tedious loops over collections with more elegant constructs. Typically, programmers at this level report that they write about half the number of lines of code in Scala that they would in Java, and that's nothing to sneeze at. Another entry point can be if you want to use a Scala-based framework such as Akka or Play; you can use these with Java, but the Scala API is more enjoyable. " Horstmann observes that developers can do fine with Scala without grasping the theory behind it. He argues that most of us learn best through examples and not through trying to comprehend abstract theories. He also believes that Scala is the most attractive choice for developers who want to move beyond Java and C++.  When asked about other choices, he comments: "Clojure is pretty nice, but I found its Lisp syntax a bit off-putting, and it seems very focused on software transactional memory, which isn't all that useful to me. And it's not statically typed. I wanted to like Groovy, but it really bothers me that the semantics seems under-defined and in flux. And it's not statically typed. Yes, there is Groovy++, but that's in even sketchier shape. There are a couple of contenders such as Kotlin and Ceylon, but so far they aren't real. So, if you want to do work with a statically typed language on the JVM that exists today, Scala is simply the pragmatic choice. It's a good thing that it's such a nice choice." Learn more about Scala by going to the interview here.

  Read the article

• how do I get dual monitors to work properly in Ubuntu 11.10 on a Dell Latitude D630?

  - by wes cook

  I have spent a lot of time trying to get dual monitors to work on Ubuntu 11.10 on my Dell Latitude D630 (nVidia NVS 135m video card). - For starters, the System Displays settings app always only showed one unknown monitor, even though I had the external Acer monitor connected. - So I downloaded and installed the nVidia drivers. According to what I read I would need to only use the nVidia driver app (nVidia X Server Settings), so that's what I've done. (System Displays settings continued to only show a single monitor anyway). - nVidia settings app only showed on monitor until I changed the BIOS setting to use the onboard video for external monitor (not the dock video, which it was set to, even though I don't have a docking station). - The nVidia setting app now recognized both monitors. So, I setup the X Server display config as Separate X screen for both monitors. My laptop screen shows up as AUO 1440x900 and my external monitor as Acer E211H 1920x1080. - Everything seemed like it would work, but the external monitor was just a complete white screen. The external monitor was non-functional, even though sometimes it would show the background image - still nothing would show up over there. - So, I checked the Enable Xinerama box. - Now, after logging out and back in, the wallpaper extends to both screens but I get no taskbar at the bottom or top, no system menus, and I have to press the power button to restart or log off. - After experimenting with all the shells, the only one that shows the menus and taskbars when I log in is Gnome Classic. - This is pretty much the same symptoms as found here: How do I fix 11.10 GUI?. - So, I resign myself to the older shell. - Everything works fine until ... I unplug the external monitor ... this is a laptop after all. - Anyway, after doing some work on the road, I plug back in and I still see both screens and it's functional except, ... - Now, the laptop screen (with the taskbar and menu bar) has 4 black bars at the top that windows cannot cover. The top bar is the menu bar (with Applications, Places, the date and time and the system menu on the right). But the next 3 bars (the same height as the top menu bar) are empty and are just reducing the max size of windows on that screen. - See screenshot here: http://i39.tinypic.com/35d2kh1.png - So ... 1. How do I get rid of those extra 3 black bars? They're taking valuable screen space. 2. (less critical) How do I successfully use both screens in the Ubuntu or Ubuntu 2D shell?

  Read the article

• URL protocol handlers in basic Ubuntu Desktop

  - by Hibou57

  There was a way to register URL protocol handlers with Gconf, which is now obsolete and there seems to be no way to do the same with DConf (or Gsettings, its recommended wrapper). How do one properly register an URL protocol handlers since DConf? Additionally, something looks strange to me (as I don't understand it), on my Ubuntu 12.04 The protocol apt:// should be handled by the apturl command. It is so with my Opera browser, but only because I added this specific association using the browser's configuration facility. Otherwise, in the rest of the environment: Running xdg-open apt://foo.bar opens elinks (my www-browser alternative). Running gnome-open apt://foo.bar opens the Software?Center. Opening gcong-editor, I see a key /desktop/gnome/url-handlers/apt whose value is apturl "%s" and its enable. This configuration seems to be ignored, which is reasonably expected, as GConf is considered obsolete. Opening dconf-editor, I can't see anything related to URL handlers or protocols in /desktop/gnome It looks a bit messy to my eyes (just teasing with this wording, nothing bad) What's underneath? Side note: I'm looking for something which preferably works even when the full desktop environment is not loaded, like when running an i3wm session with only gsettings-daemon (and other stuffs unrelated to this case) is loaded. Update Another way to “register” a protocol handler is with *.desktop files and their MIME-Type; ex. MimeType=application/<the-protocol>;. I found a /usr/share/applications/ubuntu-software-center.desktop with this content: [Desktop Entry] Name=Ubuntu Software Center GenericName=Software Center Comment=Lets you choose from thousands of applications available for Ubuntu Exec=/usr/bin/software-center %u Icon=softwarecenter Terminal=false Type=Application Categories=PackageManager;GTK;System;Settings; MimeType=application/x-deb;application/x-debian-package;x-scheme-handler/apt; StartupNotify=true X-Ubuntu-Gettext-Domain=software-center Keywords=Sources;PPA;Install;Uninstall;Remove;Purchase;Catalogue;Store; This one explains why gnome-open apt://foo.bar opens the Software?Center instead of apturl. So I installed this apturl.desktop in ~/.local/share/applications: [Desktop Entry] Encoding=UTF-8 Version=1.0 Type=Application Terminal=false Exec=/usr/bin/apturl %u Name=APT-URL Comment=APT-URL handler Icon= Categories=Application;Network; MimeType=x-scheme-handler/apt; After update-desktop-database and even after rebooting, both xdg-open and gnome-open still do the same and ignore this user desktop file, which is usual, should override the other in /usr/share/applications/. May be there is something special with desktop files specifying x-scheme-handler MIME type and they are not handled the usual way. The desktop-file way does not answer the question.

  Read the article

• apt-get upgrade stuck at the same package (openjdk-6-jre-headless)

  - by decibyte

  I'm stuck, can't upgrade my system. Running sudo apt-get upgrade gives me the following: mmm@alalunga:~$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done The following packages have been kept back: ginn libgrip0 linux-generic-pae linux-headers-generic-pae linux-image-generic-pae The following packages will be upgraded: apport apport-gtk bind9-host build-essential dhcp3-client dhcp3-common dnsutils eog evince evince-common firefox firefox-branding firefox-dbg firefox-globalmenu firefox-gnome-support firefox-locale-en gimp gimp-data gir1.2-totem-1.0 glib-networking glib-networking-common glib-networking-services gnupg gpgv icedtea-6-jre-cacao icedtea-6-jre-jamvm icedtea-6-plugin icedtea-netx icedtea-netx-common icedtea-plugin isc-dhcp-client isc-dhcp-common libapache2-mod-php5 libart-2.0-2 libbind9-80 libdns81 libevince3-3 libgimp2.0 libisc83 libisccc80 libisccfg82 liblwres80 libssl-dev libssl-doc libssl1.0.0 libtotem0 linux-firmware linux-libc-dev openjdk-6-jre openjdk-6-jre-headless openjdk-6-jre-lib openssl php-pear php5-cli php5-common php5-curl php5-dev php5-gd php5-mysql php5-xsl policykit-1-gnome python-apport python-django python-gst0.10 python-problem-report resolvconf thunderbird thunderbird-globalmenu thunderbird-gnome-support totem totem-common totem-mozilla totem-plugins xserver-xorg-input-synaptics 74 upgraded, 0 newly installed, 0 to remove and 5 not upgraded. Need to get 317 MB/327 MB of archives. After this operation, 1.481 kB of additional disk space will be used. Do you want to continue [Y/n]? Get:1 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:2 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:3 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:4 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:5 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:6 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:7 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] 9% [7 openjdk-6-jre-headless 27,3 MB/27,3 MB 100%] It keeps downloading the package openjdk-6-jre-headless, then does nothing for a while (hanging on what's the last line above), then download the package again. It's at its 13th download attempt at the moment of writing. The actual downloads seem to be done just fine, but whatever it does after downloading seems to be failing. I tried removing openjdk-6, but then it wanted to install openjdk-7 instead, with the same result, hanging at openjdk-7-jre-headless instead. I also tried changing servers from my local (Danish) to the main server. No luck. It's also keeping me from upgrading alle the other packages. What to do?

  Read the article

• Ubuntu 12.04 can't detect internal mobile broadband (Gobi 2000)

  - by Anega

  Hi I have been trying Ubuntu to detect and connect using the buit in mobile broadband capability in my HP 110 netbook but until now nothing seems to work Output of lspci command: 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) Output of lsusb command: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 1fea:0008 Bus 005 Device 002: ID 03f0:2a1d Hewlett-Packard Bus 001 Device 005: ID 03f0:241d Hewlett-Packard Gobi 2000 Wireless Modem (QDL mode) So far I have been trying what is intended on several pages, trying to update firmware using wine and then moving .mda or whatever files the update package GobiInstaller.mdi throws out. The results are always the same: After running Output of wine msiexec /a GobiInstaller.msi /qb TARGETDIR="c:\temp" fixme:advapi:GetCurrentHwProfileA (0x33fba8) semi-stub fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:win:RegisterDeviceNotificationA (hwnd=0x13e250, filter=0xf7e984,flags=0x00000001) returns a fake device notification handle! fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:advapi:RegisterEventSourceW ((null),L"Bonjour Service"): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:winsock:WSAIoctl -> SIO_ADDRESS_LIST_CHANGE request: stub fixme:iphlpapi:DeleteIpForwardEntry (pRoute 0x79e920): stub fixme:iphlpapi:CreateIpForwardEntry (pRoute 0x79e958): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:service:EnumServicesStatusW resume handle not supported fixme:service:EnumServicesStatusW resume handle not supported fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x79e644 0x79e63c fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:storage:create_storagefile Storage share mode not implemented. err:msi:ITERATE_Actions Execution halted, action L"_693CD41C_A4A2_4FA1_8888_FC56C9E6E13B" returned 1603 err:rpc:I_RpcGetBuffer no binding err:rpc:I_RpcGetBuffer no binding andres@andres-HP-Mini-110-1100:~/.wine/drive_c/Qualcomm$ fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e588,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub And creates 2 empty folders, I have been trying hard and I am not sure if I am doing it the way it should be. Thanks

  Read the article

• Data Structures usage and motivational aspects

  - by Aubergine

  For long student life I was always wondering why there are so many of them yet there seems to be lack of usage at all in many of them. The opinion didn't really change when I got a job. We have brilliant books on what they are and their complexities, but I never encounter resources which would actually give a good hint of practical usage. I perfectly understand that I have to look at problem , analyse required operations, look for data structure that does them efficiently. However in practice I never do that, not because of human laziness syndrome, but because when it comes to work I acknowledge time priority over self-development. Over time I thought that when I would be better developer I will automatically use more of them - that didn't happen at all or maybe I just didn't. Then I found that the colleagues usually in the same plate as me - knowing more or less some three of data structures and being totally happy about it and refusing to discuss this matter further with me, coming back to conversations about 'cool new languages' 'libraries that do jobs for you' and the joy to work under scrumban etc. I am stuck with ArrayLists, Arrays and SortedMap , which no matter what I do always suffice or either I tweak them to be capable of fulfilling my task. Yes, it might be inefficient but do we really have to care if Intel increases performance over years no matter if we improve our skills? Does new Xeon or IBM machines really care what we use? What if I like build things, but I am not particularly excited whether it is n log(n) or just n? Over twenty years the processing power increased enormously, which gives us freedom of not being critical about which one to use? On top of that new more optimized languages appear which support multiple cores more efficiently. To be more specific: I would like to find motivational material on complex real areas/cases of possible effective usages of data structures. I would be really grateful if you would provide relevant resources. There is similar question ,but in the end the links again mostly describe or do dumb example(vehicles, students or holy grail quest - yes, very relevant) them and people keep referring to the "scenario decides the data structure to use". I want to know these complex scenarios to be able to identify similarities to my scenario and then use them. The complex scenarios where it really matters and not necessarily of quantitive nature. It seems that data structures only concern is efficiency and nothing else? There seems to be no particular convenience for developer in use one over another. (only when I found scientific resources on why exactly simple carbohydrates are evil I stopped eating sugar and candies completely replacing it with less harmful fruits - I hope you can see the analogy)

  Read the article

• Split Internet Explorer into Dual-Panes

  - by Asian Angel

  If you have a wide screen monitor then you may want to make better use of Internet Explorer’s browser window area. Now you can split the browser window into dual-panes as needed with the IE Split browser plugin. Note: Requires .NET Framework 2.0 or higher (link provided below). IE Split in Action If you are using an older version of this software here is something to keep in mind before upgrading to the 2.0 release. Once you have installed IE Split you will notice a new toolbar added to your browser. As seen here, you can condense it down tightly and access it using the drop-down bar. A closer look at the drop-down bar. Notice the address bar…this will be for the left pane when you split the browser window. Here is our browser split into dual-panes. There are two address bars and two tab/title bars each corresponding to their appropriate pane. It may look slightly backwards at first but is not hard to get used to. A better view of the left pane with the IE Split navigation & title bars showing. Note: The title bar can be hidden if desired. And the right pane. You can also have multiple “split” tabs open if needed. There is nothing quite like getting double the value for the same amount of space. When you no longer need dual-panes open just click on the “x” to close IE Split down. All back to normal again. Conclusion While might not be for everyone this can still be useful for those who need side-by-side access to websites without using multiple separate windows. Links Download IE-Split Download the Microsoft .NET Framework 4 (Standalone Installer) Similar Articles Productive Geek Tips Set Up Multi-Pane Viewing in FirefoxWhy Can’t I Turn the Details/Preview Panes On or Off in Windows Vista Explorer?Split a text file in half (or any percentage) on Ubuntu LinuxMysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPMake Ctrl+Tab in Internet Explorer 7 Use Most Recent Order TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like)

  Read the article

• 302: this blog will be closed

  - by preishuber

  After nearly 7 years I will discontinue blogging on this site. My resources are limited. You can reach my German blog which is used to support my customers. Looking back to a long an interesting journey ASP.NET by ScottGu That was the reason to attend this site and support Microsoft as much as I can. For that I was honored as ASP.NET MVP- thanks again. Meet Scoot several times. Great guy! Forums I have left NNTP forums a few years ago and now Microsoft closed it- It was my idea ;-) AJAX Was the wrong way- JQuery won the game IIS7 That is really a great plattform and the IIS team rules. I am sad that is so silent around that topic. ASP.NET after 2.0 Is no longer my world. I love ASP.NET and ASP.NET Server controls. I hate the discussion about how to follow the holy rules of MVC. Microsoft have dropped the goal to bring ASP.NET to #1 and accepted PHP is it. Facebook & Twittering Microblogging takes over a part of the blogging business. Shorter faster cheaper- or as SteveB mentioned - do more with less. Google Google is taking over the web. I am using Bing every time as I can but Google have more options. Sorry Microsoft you will loose that game. Apple That is not the biggest problem of Microsoft. the Ixxx takes over a small part but big money of the market, but the customers are not strongly linked. New wave new hype- Game over Apple. Silverlight My new home. I can reuse a lot of my skills and love the possibilitys. Silverligth will passing WPF-and strike Flash Windows phone 7 Also my skills fit. I just will use it for fun. I am not really satisfied about what I have heard from MIX. Guys from Redmond, I am sad to say you have been the best Smartphone OS and lost everything. The ADO vNext Story That will be the next mystic point. WCF, REST, JSON, ATOM and now OData. Nothing about SQL commands. LINQ, ORM is also not the final solution for multilayered disconnected async scenarios. Personally I prefere the OData idea and dislike the Swiss Army Knife (German Eierlegende Wollmilchsau) WCF. I am still in INETA Speakers board and I am glad to come to your user group. In all other cases you can hire me over ppedv AG. Good by and have good live.

  Read the article

• Open port in gufw is closed, no incoming connection on deluge

  - by user66987

  I have a problem configuring gufw. I open ports on it, but when i test in deluge it shows as closed. Any help on setting up the firewall would be greatly appreciated. This is the output I get on the firewall in terminal: Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN 1346/dnsmasq tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 970/cupsd tcp 0 0 0.0.0.0:55521 0.0.0.0:* LISTEN 17362/python tcp6 0 0 ::1:631 :::* LISTEN 970/cupsd tcp6 0 0 :::55521 :::* LISTEN 17362/python udp 0 0 10.0.0.125:1900 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:1900 0.0.0.0:* 17362/python udp 0 0 0.0.0.0:1900 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:53162 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:53 0.0.0.0:* 1346/dnsmasq udp 0 0 0.0.0.0:68 0.0.0.0:* 1312/dhclient udp 0 0 10.0.0.125:36948 0.0.0.0:* 17362/python udp 0 0 0.0.0.0:37240 0.0.0.0:* 17362/python udp 0 0 10.0.0.125:6771 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:6771 0.0.0.0:* 17362/python udp 0 0 0.0.0.0:6771 0.0.0.0:* 17362/python udp 0 0 10.0.0.125:50034 0.0.0.0:* 17362/python udp 0 0 0.0.0.0:58340 0.0.0.0:* 982/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 982/avahi-daemon: r udp 0 0 0.0.0.0:56947 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:57059 0.0.0.0:* 17362/python udp6 0 0 :::49793 :::* 982/avahi-daemon: r udp6 0 0 :::5353 :::* 982/avahi-daemon: r kenneth@kenneth-K53U:~$ sudo ufw status Status: aktive Til Handling Fra --- -------- --- 6881:6891/tcp ALLOW Anywhere 6881:6891/udp ALLOW Anywhere 55521/tcp ALLOW Anywhere 6881:6891/tcp ALLOW Anywhere (v6) 6881:6891/udp ALLOW Anywhere (v6) 55521/tcp ALLOW Anywhere (v6) I also want to be able to use the firewall with linuxdc, so I need other ports open as well. This is connected to the firewall. Because when I turn off the firewall, the port is open. So this is not a problem with my modem. Do I need the firewall? The broadband modem has a hardware firewall. Update: Forgot to add. When my firewall is inactive, it closes ports after a time. So when I use linuxdc, I have to flush iptabels and activating it again. Is this supposed to do this when the firewall is deactivated? Update again: All my ports are closed now, flushing the iptable does not work anymore. I have uninstalled gufw, but still all my ports are closed. And to say it again, this has nothing to do with my broadband modem since it worked when I used windows 7. I need help to open the ports.

  Read the article

• MOSS 2007 WSP Retraction 'Error"

  - by juanlarios

  This one is a quick post , but I thought I would post this information as I could not find anything that helped me on this specific scenario. Please read the entire article before taking action as there are some irreversable or very troublesome routes I caution about! Problem: I had a client trying to retract a WSP from Central Admin and would eventually go to an, 'Error' State. I could not retract it and after looking at event logs I figured it was a problem with security. I tried several accounts, checked the databases to see if there was some issue with readonly databases and nothing was working.   Solution: Delete the solution from central admin! Yes, I said it. With StsAdm , just delete the solution from Central Admin using this command: "C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\BIN\STSADM.exe" -o deletesolution -name "yoursolution.wsp" What has just happened is that Central Admin does not know about the WSP anymore but the feature and any deployed files are still on the server. For whatever reason SharePoint was not able to retract the files as it normally does. Now you can do one of two things, you can add the solution again to central admin and deploy overtop of the deployed files so it overrides them, or simply clean up the files manually. I re-added the solution through stsadm, but then deployed through stsadm using the -force option in the command. This overrides the existing files on the server. If you deploy through Central admin it will tell you you need the -force option that is not offered as part of the UI in central admin. Use the following command: "C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\BIN\STSADM.exe" -o deploysolution -name "YourSolution.wsp" -immediate -allowgacdeployment -force Just to make sure everything was good, I retracted to solution again, and it worked! then I deleted the solution from central admin alltogether. Then I checked the server and noticed all the files that were deployed with the WSP were cleaned up properly. I then re-added the new WSP the client was looking to install (an Updated WSP). Conclusion: I have no idea why it was not able to retract, but I have seen this several times. I don't know if has to do with security of certain accounts. Althought it's anoying at times, it is fairly easy to fix if you have good instructions. Hope it helps you out!   ***WORD OF CAUTION - if you clean up the files manually you might want to uninstall the features through STSADM commands as SharePOint might still recognize the features that were deployed as the WSP. You might not want to get into the mess of deleting files that are still part of activated or installed Features. THis is why I suggest doing what I did.

  Read the article

• In a multidisciplinary team, how much should each member's skills overlap?

  - by spade78

  I've been working in embedded software development for this small startup and our team is pretty small: about 3-4 people. We're responsible for all engineering which involves an RF device controlled by an embedded microcontroller that connects to a PC host which runs some sort of data collection and analysis software. I have come to develop these two guidelines when I work with my colleagues: Define a clear separation of responsibilities and make sure each person's contribution to the final product doesn't overlap. Don't assume your colleagues know everything about their responsibilities. I assume there is some sort of technology that I will need to be competent at to properly interface with the work of my colleagues. The first point is pretty easy for us. I do firmware, one guy does the RF, another does the PC software, and the last does the DSP work. Nothing overlaps in terms of two people's work being mixed into the final product. For that to happen, one guy has to hand off work to another guy who will vet it and integrate it himself. The second point is the heart of my question. I've learned the hard way not to trust the knowledge of my colleagues absolutley no matter how many years experience they claim to have. At least not until they've demonstrated it to me a couple of times. So given that whenever I develop a piece of firmware, if it interfaces with some technology that I don't know then I'll try to learn it and develop a piece of test code that helps me understand what they're doing. That way if my piece of the product comes into conflict with another piece then I have some knowledge about possible causes. For example, the PC guy has started implementing his GUI's in .NET WPF (C#) and using LibUSBdotNET for USB access. So I've been learning C# and the .NET USB library that he uses and I build a little console app to help me understand how that USB library works. Now all this takes extra time and energy but I feel it's justified as it gives me a foothold to confront integration problems. Also I like learning this new stuff so I don't mind. On the other hand I can see how this can turn into a time synch for work that won't make it into the final product and may never turn into a problem. So how much experience/skills overlap do you expect in your teammates relative to your own skills? Does this issue go away as the teams get bigger and more diverse?

  Read the article

• The Numbers of Customer Experience

  - by Christie Flanagan

  This week, we’ll be continuing our conversations about Customer Experience (CX) on the Oracle WebCenter blog.  While we all know that customer experience is critically important for acquiring new customers and engendering long term brand loyalty, I thought we could kick this week off by taking a look at the numbers of customer experience.   I’m sure you’ll agree that nothing quite puts things into perspective like numbers and figures. A whopping 86% of consumers say that they are willing to pay more for a better customer experience.  But many companies are failing to step up to the challenge.  And when companies fail deliver on customer experience expectations, they leave money on the table. A huge percentage of customers, 89%, begin doing business with a competitor following a poor customer experience. Breaking up isn’t hard to do and today’s empowered customers have no qualms about taking their business elsewhere when their expectations for customer experience are not met. Over a quarter of consumers, 26%, posted a negative comment on a social networking site like Facebook or Twitter following a poor customer experience. Today, individual customer service failures have the ability to easily snowball.  An unsatisfied customer has the ability to easily share their rancor with their entire social network and chip away at your brand’s reputation. A large number of consumers, 79%,  who shared complaints about poor customer experience online had their complaints ignored.  Companies ignore customer complaints at their own peril.  And unsatisfied customers, when handled effectively, have the potential to become advocates for your brand.  Of the 21% of consumers who did get responses to complaints, more than half had positive reactions to the same company about which they were previously complaining. Half of consumers will give a brand only a week to respond to a question before they stop doing business with them.  The clock is ticking when customers have questions about your brand and a week is an eternity in the realm of customer experience.  The source for these stats is the 2011 Customer Experience Impact (CEI) Report, which explores the relationship between consumers and brands.  The report is based on a survey commissioned by RightNow (acquired by Oracle in 2012) and conducted by Harris Interactive. If you’re interested in seeing more facts and figures about customer experience, download the full report.

  Read the article

< Previous Page | 415 416 417 418 419 420 421 422 423 424 425 426  | Next Page >