Search Results

Search found 66435 results on 2658 pages for 'system volume information'.

Page 421/2658 | < Previous Page | 417 418 419 420 421 422 423 424 425 426 427 428  | Next Page >

  • VMware and Windows Activation

    - by Peter M
    Yesterday I installed Slysoft's Virtual CloneDrive in order to mount an iso for some software installation on my host system (XP Pro SP3) This morning I fired up VMware and made a linked clone of an existing XP vm in order to do some software testing. This is the sort of thing that I do all the time, and the base XP vm that I clone was activated a long long time ago. The surprise today was that the newly cloned vm was no longer activated and XP cited major changes in hardware as the reason. I repeated the test with a full clone of the base system and got the same message. I then started up my base vm and it seemed to be activated, yet another vm (which I fully cloned from the base vm a long time ago) now started reporting that XP was not activated. At this point I guessed that Virtual DriveClone might have been the source of my hardware differences so I uninstalled it and rebooted. After this I made a new linked clone and full clone of the base vm and XP did not complain about not being activated. So I seem to be back to where I was before installing Virtual DriveClone with the exception that that one particular XP vm continues to complain about activation (even though 4 or 5 other XP vm's are fat and happy) Now to my questions: Why would adding Virtual CloneDrive to the host system affect XP activation on the vm's? From their point of view I would have thought that the environment had not changed as I had not enabled any new hard drives in their systems. Or is adding a hard drive to the host system enough to upset XP activation? Since this event, one of my fully cloned vm's is still reporting that XP is not activated even though I have removed Virtual CloneDrive. Is there anyway to convince XP that it is on the same system as yesterday? Or are my only options to do an activation or restore the vm from a previous backup?

    Read the article

  • Worth it to move /var to physical disk vs logical?

    - by Tammer Ibrahim
    Brief question about partition layout. I use an SSD for /, /boot, /usr, & /home partitions. I'd like to move /var to a mechanical disk to minimize writes to the SSD. I'm mainly concerned about maximizing drive life rather than maximizing performance (although I obviously wouldn't want to cripple my server). My mechanical disks consist of two drives sharing LVM, and a third used for nightly rsync backups. I also have a bunch of old 2.5in hard disks lying around. My question is, should I simply create a new LVM volume '/var' on my primary data store, or would it be worth the increased energy consumption (in terms of maximizing the lifetime of the LVMed drives) to install a low volume 2.5in disk to use just for /var? On a more general level my question is about the trade offs of placing OS mounts on the same physical volumes as my data. Thanks for any help!

    Read the article

  • Are speakers wasting power when they are not in use?

    - by Dennis Cheung
    I guess all of you have a pair/set of speakers for your MP3s. I am just interesting to how do they do when they are not playing? How actually the power spent by the speaker? Does any the below cases matter? Idle / Silence input When you computer is off / not connected Raise the volume by hardware (turn/push the button on the speaker) Raise the volume by software (do it with your mouse) BTW, to save the world. I am here to suggest you to unplug it when you leave your PC.

    Read the article

  • Recover data from hard disk

    - by Hitesh Solanki
    Hi I have formatted my c: drive and window xp is installed successfully,but I cannot able to access d: drive. when I am trying to double click on the d: drive,following message is displayed: "the disk in drive D: is not formatted, do you want to format it now ? " When I am trying to access from command prompt,the following message is displayed: "The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted." So please help me.... Thanks in advance....

    Read the article

  • How to Reinstalling MSSQL Server 2008 with SP1? (Windows 7)

    - by n10i
    I am using Windows 7 Ultimate x64. I had earlier installed SQL server 2008 with SP1 with Visual Studio 2008 Team System with sp1. Now that VS2010 is out I wanted to install it so I uninstalled visual studio then MSSLQ Server 2008 SP1 and then SQL Server 2008 as suggested here: h**p://mark.michaelis.net/Blog/SQLServer2008InstallNightmare.aspx But now when I try to reinstall it I am unable to get it right I am getting the ERROR: “Attempted to perform an unauthorized operation.” (Following is part of the log file): 2010-04-16 04:54:57 Slp: Sco: Attempting to replace account with sid in security descriptor D:(A;CI;KR;;;S-1-5-21-2213424280-2581054173-1939225444-1027) 2010-04-16 04:54:57 Slp: ReplaceAccountWithSidInSddl -- SDDL to be processed: D:(A;CI;KR;;;S-1-5-21-2213424280-2581054173-1939225444-1027) 2010-04-16 04:54:57 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned: D:(A;CI;KR;;;S-1-5-21-2213424280-2581054173-1939225444-1027) 2010-04-16 04:54:57 Slp: Prompting user if they want to retry this action due to the following failure: 2010-04-16 04:54:57 Slp: ---------------------------------------- 2010-04-16 04:54:57 Slp: The following is an exception stack listing the exceptions in outermost to innermost order 2010-04-16 04:54:57 Slp: Inner exceptions are being indented 2010-04-16 04:54:57 Slp: 2010-04-16 04:54:57 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException 2010-04-16 04:54:57 Slp: Message: 2010-04-16 04:54:57 Slp: Attempted to perform an unauthorized operation. 2010-04-16 04:54:57 Slp: Data: 2010-04-16 04:54:57 Slp: WatsonData = Microsoft SQL Server 2010-04-16 04:54:57 Slp: DisableRetry = true 2010-04-16 04:54:57 Slp: Inner exception type: System.UnauthorizedAccessException 2010-04-16 04:54:57 Slp: Message: 2010-04-16 04:54:57 Slp: Attempted to perform an unauthorized operation. 2010-04-16 04:54:57 Slp: Stack: 2010-04-16 04:54:57 Slp: at System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd) 2010-04-16 04:54:57 Slp: at System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext) 2010-04-16 04:54:57 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections) 2010-04-16 04:54:57 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key) 2010-04-16 04:54:57 Slp: at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite) 2010-04-16 04:54:57 Slp: ---------------------------------------- 2010-04-16 10:37:19 Slp: User has chosen to cancel this action 2010-04-16 10:37:19 Slp: Watson Bucket 2 Original Parameter Values 2010-04-16 10:37:19 Slp: Parameter 0 : SQL2008@RTM@ 2010-04-16 10:37:19 Slp: Parameter 2 : System.Security.AccessControl.Win32.GetSecurityInfo 2010-04-16 10:37:19 Slp: Parameter 3 : Microsoft.SqlServer.Configuration.Sco.ScoException@1211@1 2010-04-16 10:37:19 Slp: Parameter 4 : System.UnauthorizedAccessException@-2147024891 2010-04-16 10:37:19 Slp: Parameter 5 : SqlBrowserConfigAction_install_ConfigNonRC 2010-04-16 10:37:19 Slp: Parameter 7 : Microsoft SQL Server 2010-04-16 10:37:19 Slp: Parameter 8 : Microsoft SQL Server 2010-04-16 10:37:19 Slp: Final Parameter Values I have googled around for the error given error but all I could find is to regedit and reset permissions on certain reg keys but I don’t see any reg keys with access problem in the log file the log file can be download here: http://www.mediafire.com/?dznizytjznn. Please guys help me out here I am a developer and I cannot afford an OS reinstallation! Thanks in advance…

    Read the article

  • Why won't my Windows 7 KMS key work on my Server 2008 KMS server?

    - by Ryan Bolger
    Our Microsoft volume licensing site was recently updated to include our Windows 7 and Server 2008 R2 KMS keys. We have an existing KMS server running on Server 2008 (not R2). In an attempt to be proactive about supporting the new OSes in our environment, I unregistered the old KMS key with slmgr.vbs and tried registering the new key. The registration failed with Error 0xC004F050. The description for that error was "The Software Licensing Service reported that the product key is invalid." What's wrong? I've checked and double checked that for typos against what is listed on the Volume Licensing website.

    Read the article

  • Sent command-line output as an arguments to other command

    - by pavelartlover
    1) Here is the command to install special package (for example system/header) #pkg install system/header 2) ALso we can install several packages #pkg install system/header network/ssh package/rpm 3) Here is the command to show all available packages from special group #pkg contents -o fmri -H -rt depend -a type=group solaris-desktop How to install all packages from a special group in one command? (How to send output from the third command as an argument to second?)

    Read the article

  • Untar after uploading to linux from windows

    - by Miqdad Ali
    I have created tar.gz from my linux server, and I downloaded the same to my linux system and I successfully doen untar with tar -xvf package.tar.gz. And now my issue I downloaded same package.tar.gz to the windows system then uploaded to another linux server, and tried same command tar -xvf package.tar.gz. but it getting tar: This does not look like a tar archive tar: Skipping to next header tar: Exiting with failure status due to previous errors as response. I also tried filezill manual trnasfer with binary mode. How can I do the same ? Update When I directly download to the linux system its working fine. When I downloaded to the windows system and try to extract with 7zip or winrar error is getting When I download to windows and upload to linux same error getting

    Read the article

  • Analyze a BSOD (irql_less_than_or_equal)

    - by Bruno Reis
    Hello. About 2 months ago I bought a new system and built it at home: Mother board: XFX X58i Processor: Core i7 920, using the stock cooler Memory: 3x2GB Corsair DDR3 1600 Video card: NVIDIA GTS 250 (1GB) Hard disk: 2x WD 500GB, 7200rpm I have 2 screens plugged into the video card, and the system is connected to a 550W PSU. Nothing is overclocked. After building the system, I stressed it a lot with Prime95 and rthdribl to check its stability. All my tests were perfect. So I reinstalled Win 7 x64 Professional and started using it normally. The first week (2010-03-15) I got the infamous irql_less_than_or_equal BSOD. Ten days after (2010-03-24) I got another one. Then on 2010-04-09, 2010-05-04. Since 2 days ago it became worse: I got one bluescreen per day! (2010-05-12, 2010-05-13, 2010-05-14). I installed BlueScreenView to try to obtain some information, but I'm not able to extract any useful information apart from the bug check string (irql_less_than_or_equal), and that it was caused by ntoskrnl.exe (the first three at ntoskrnl.exe+71f00, the last 4 at ntoskrnl.exe+70600 -- which I suspect could be the same thing, as Microsoft could have patched this file in the mean time, so the address of the function causing it changed). Then I stressed my memory sticks with memtest, they worked perfectly. After booting, I've stressed my GPU with FurMark and RTHDRIBL, everything was fine. Then I stressed the CPU with 4 instances of Prime95 while monitoring the temperature -- that never exceeded 85oC with the case closed --, everything fine. Finally I've stressed the whole system with HeavyLoad for a looooong time, everything worked just fine. So, I have stressed most of the components of the system, but couldn't get any useful information from it. Do you have any hint on what else can I do to find the culprit? Thanks Bruno

    Read the article

  • asterisk send mute command to jukebox on incoming call

    - by Jona
    Hi, We're trialling a Asterisk Now server to take over from our ageing PBX system. One of the "nice to have" features would be the ability to pause or lower the volume on the office jukebox if an incoming call is detected. We currently run a linux jukebox which plays music out of the speakers using mpd and can be controlled by the mpc client. We can manually issue the following command to achieve this: mpc volume 20 Does anyone know how to get asterisk to execute this command or some action that we could hook into when a phone call is incoming to specific extensions?

    Read the article

  • Mount TMPFS instead of ro /dev

    - by schiggn
    I am working on a ARM-Based embedded system with a custom Debian Linux based on kernel 2.6.31. In the final system, the Root file system is stored as squashfs on flash. Now, the folder /dev is created by udev, but since there is no hot plugging functionality needed and booting time is critical, I wanted to delete udev and "hard code" the /dev folder (read here, page 5). because i still need to change parameters of the devices (with ioctl /sysfs) this does not work for me in this case. so i thought of mounting a tmpfs on /dev and change the parameters there. is this possible? and how to do best? my approach would be: delete /dev from RFS create tar containing basic devices mount tmpfs /dev untar tar-file into /dev change parameters Could this work? Do you see any problems? I found out, that you can mount on top of already mounted mount point, is it somehow possible just to take data with while mounting the new file system? if so that would be very convenient! Thanks Update: I just tried that out, but I'm stuck at a certain point. I packed all my devices into devices.tar, packed it into /usr of my squashfs and added the following lines to mountkernfs.sh, which is executed right after INIT. #mount /dev on tmpfs echo -n "Mounting /dev on tmpfs..." mount -o size=5M,mode=0755 -t tmpfs tmpfs /dev mknod -m 600 /dev/console c 5 1 mknod -m 600 /dev/null c 1 3 echo "done." echo -n "Populating /dev..." tar -xf /usr/devices.tar -C /dev echo "done." This works fine on the version over NFS, if I place printf's in the code, I can see it executing, if I comment out the extracting part, its complaining about missing devices. Booting OK mmc0: new high speed SDHC card at address 0007 mmcblk0: mmc0:0007 SD04G 3.67 GiB mmcblk0: p1 IP-Config: Unable to set interface netmask (-22). Looking up port of RPC 100003/2 on 192.168.1.234 Looking up port of RPC 100005/1 on 192.168.1.234 VFS: Mounted root (nfs filesystem) on device 0:14. Freeing init memory: 136K INIT: version 2.86 booting Mounting /dev on tmpfs...done. Populating /dev...done. Initializing /var...done. Setting the system clock. System Clock set to: Thu Sep 13 11:26:23 UTC 2012. INIT: Entering runlevel: 2 UBI: attaching mtd8 to ubi0 Commenting out the extraction of the tar mmc0: new high speed SDHC card at address 0007 mmcblk0: mmc0:0007 SD04G 3.67 GiB mmcblk0: p1 IP-Config: Unable to set interface netmask (-22). Looking up port of RPC 100003/2 on 192.168.1.234 Looking up port of RPC 100005/1 on 192.168.1.234 VFS: Mounted root (nfs filesystem) on device 0:14. Freeing init memory: 136K INIT: version 2.86 booting Mounting /dev on tmpfs...done. Populating /dev...done. Initializing /var...done. Setting the system clock. Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. Unable to set System Clock to: Thu Sep 13 12:24:00 UTC 2012 ... (warning). INIT: Entering runlevel: 2 libubi: error!: cannot open "/dev/ubi_ctrl" So far so good. But if I pack the whole story into a squashfs and boot from there, it is acting strange. It's telling me while booting that it is unable to open an initial console and its throwing errors on mounting the UBIFS devices, but finally provides a login anyway. Over that my echo's are not executed. If I then log in, /dev is mounted as TMPFS as desired and all the devices reside inside. When I redo the "mount" command to mount the UBIFS partitions it is executed whitout problem and useable. From squashfs VFS: Mounted root (squashfs filesystem) readonly on device 31:15. Freeing init memory: 136K Warning: unable to open an initial console. mmc0: new high speed SDHC card at address 0007 mmcblk0: mmc0:0007 SD04G 3.67 GiB mmcblk0: p1 UBIFS error (pid 484): ubifs_get_sb: cannot open "ubi1_0", error -19 Additionally, a part of the rest of the bootscripts is still exexuted, but not all of them. Does anyone has a clue why? Other question, is 5MB enough/too much for /dev?

    Read the article

  • Windows XP Pro SP3 stop error code 0x000000F4

    - by Andrew Ford
    I have a system running Windows XP Pro SP3. My wife is the primary user of this system, and the last several days in a row, when she tries to log in to the system it gives her a BSOD with the stop error code 0x000000F4. The rest of the error codes change every time she tries to log on, but that one seems to stay constant. The error it gives me is: A process or thread crucial to system operation has unexpectedly exited or been terminated. The machine will also get stuck in a boot loop, where it keeps giving me the screen saying that windows did not start successfully, and to choose how to start windows. I have tried Safe Mode, Last known Good Config, and Normally, and all have resulted in either a return to the boot loop, or BSOD. What might this mean? How can I fix it, without doing a clean install?

    Read the article

  • reiserfsck --rebuild-tree failed: Not enough allocable blocks

    - by mojo
    I have a reiserfs volume that required a --rebuild-tree, but is currently failing to complete when I pass it --rebuild-tree. Here is the output that I receive when running it: reiserfsck 3.6.19 (2003 www.namesys.com) # reiserfsck --rebuild-tree started at Mon Oct 26 13:22:16 2009 # Pass 0: # Pass 0 The whole partition (7864320 blocks) is to be scanned Skipping 8450 blocks (super block, journal, bitmaps) 7855870 blocks will be read 0%....20%....40%....60%....80%....100% left 0, 9408 /sec 287884 directory entries were hashed with "r5" hash. "r5" hash is selected Flushing..finished Read blocks (but not data blocks) 7855870 Leaves among those 6105606 Objectids found 287892 Pass 1 (will try to insert 6105606 leaves): # Pass 1 Looking for allocable blocks .. finished 0%....20%....40%....60%....80%....Not enough allocable blocks, checking bitmap...there are 1 allocable blocks, btw out of disk space Aborted I can't mount it, and I can't fsck it. I've tried extending the volume, but that hasn't helped either.

    Read the article

  • NTBackup Error: C: is not a valid drive

    - by Chris
    I'm trying to use NtBackup to back up the C: Drive on a Microsoft Windows Small Business Server 2003 machine and get the following error in the log file: Backup Status Operation: Backup Active backup destination: 4mm DDS Media name: "Media created 04/02/2011 at 21:56" Error: The device reported an error on a request to read data from media. Error reported: Invalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. Error: C: is not a valid drive, or you do not have access. The operation did not successfully complete. I'm using a brand new SATA Quantum Dat-72 drive with a brand new tape (tried a couple of tapes). I carry out the following: Open NTBackup Select Backup Tab Tick the box next to C: Ensure Destination is 4mm DDS Media is set to New Press Start Backup Choose Replace the data on the media and press Start Backup NTBackup tries to mount the media Error Message shows: The device reported an error on a request to read data from media. Error reported: INvalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. On checking the log I find the following: Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8018 Date: 04/02/2011 Time: 22:02:02 User: N/A Computer: SERVER Description: Begin Operation For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. and then; Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8019 Date: 04/02/2011 Time: 22:02:59 User: N/A Computer: SERVER Description: End Operation: The operation was successfully completed. Consult the backup report for more details. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Read the article

  • Remote Desktop to Server 2008 fails from one particular Win7 client

    - by Jesse McGrew
    I have a VPS running Windows Web Server 2008 R2. I'm able to connect using Remote Desktop from my home PC (Windows 7), personal laptop (Windows 7), and work laptop (Windows XP). However, I cannot connect from my work PC (Windows 7). I receive the error "The logon attempt failed" in the RDP client, and the server event log shows "An account failed to log on" with this explanation: Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: username Account Domain: hostname Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: JESSE-PC Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 I can connect from the offending work PC if I start up Windows XP Mode and use the RDP client inside that. The server is part of a domain but my account is local, so I'm logging in using a username of the form hostname\username. None of the clients are part of a domain. The server uses a self-signed certificate, and connecting from home I get a warning about that, but connecting from work I just get the logon error.

    Read the article

  • TFS 2012: Backup Plan Fails with empty log file

    - by Vitor
    I have a Team Foundation Server 2012 installation with Power Tools, and I defined a backup plan using the wizard found in the "Database Backup Tools" in the Team Foundation Server Administration Console. I set the backup plan to do a full database backup on Sunday mornings, to another server in the network. I followed the wizard with no problems and the Backup Plan was set successfully. However when the backup runs it returns Error as result and when I go to the log file I only get the header and no further info: [Info @01:00:01.078] ==================================================================== [Info @01:00:01.078] Team Foundation Server Administration Log [Info @01:00:01.078] Version : 11.0.50727.1 [Info @01:00:01.078] DateTime : 11/25/2012 02:00:01 [Info @01:00:01.078] Type : Full Backup Activity [Info @01:00:01.078] User : <backup user> [Info @01:00:01.078] Machine : <TFS Server> [Info @01:00:01.078] System : Microsoft Windows NT 6.2.9200.0 (AMD64) [Info @01:00:01.078] ==================================================================== I can imagine it's a permission problem, but I have no idea where to start ... Can anyone help? Thank you for your time! EDIT I'm not sure if it is related, but I logged in with "backup user" in "TFS Server" and there was this crash window opened with "TFS Power Tool Shell Extension (TfsComProviderSvr) has stopped working". The full crash log is here: Problem signature: Problem Event Name: APPCRASH Application Name: TfsComProviderSvr.exe Application Version: 11.0.50727.0 Application Timestamp: 5050cd2a Fault Module Name: StackHash_e8da Fault Module Version: 6.2.9200.16420 Fault Module Timestamp: 505aaa82 Exception Code: c0000374 Exception Offset: PCH_72_FROM_ntdll+0x00040DA8 OS Version: 6.2.9200.2.0.0.272.7 Locale ID: 1043 Additional Information 1: e8da Additional Information 2: e8dac447e1089515a72386afa6746972 Additional Information 3: d903 Additional Information 4: d9036f986c69f4492a70e4cf004fb44d Does it help? Thanks everyone!

    Read the article

  • Alternatives to using email (in particular, Outlook) as a knowledge store?

    - by Umber Ferrule
    I suspect that, like many people, I use my work email account (accessed via Outlook 2007) to store information. I generally try to group similar things in folders and sub-folders, but with a multitude of folders this gets very unwieldy. In particular, it can be a bind to locate things using Outlook's tree structure. (As an aside: I've yet to come across a good free search add-on for Outlook.) I realise Outlook is not the best place to store all my information and I'd prefer not to. In an ideal world I'd like to be able to organise all of the information stored in Outlook in a MindMap (my software of choice being Freemind) or Wiki. To maintain an email audit-trail, I've considered saving individual emails as files using a MindMap or Wiki to link them. What do people think of this? (I can't say I relish the thought of the exporting process!) Whatever I do is going to involve some pain (i.e. setting up a Wiki/MindMap) or sticking with what Outlook provides currently. Has anyone been in the same position? Has anyone mass-migrated information from Outlook? If so, what was the best way? Any ideas or alternative proposals?

    Read the article

  • VFS: file-max limit 1231582 reached

    - by Rick Koshi
    I'm running a Linux 2.6.36 kernel, and I'm seeing some random errors. Things like ls: error while loading shared libraries: libpthread.so.0: cannot open shared object file: Error 23 Yes, my system can't consistently run an 'ls' command. :( I note several errors in my dmesg output: # dmesg | tail [2808967.543203] EXT4-fs (sda3): re-mounted. Opts: (null) [2837776.220605] xv[14450] general protection ip:7f20c20c6ac6 sp:7fff3641b368 error:0 in libpng14.so.14.4.0[7f20c20a9000+29000] [4931344.685302] EXT4-fs (md16): re-mounted. Opts: (null) [4982666.631444] VFS: file-max limit 1231582 reached [4982666.764240] VFS: file-max limit 1231582 reached [4982767.360574] VFS: file-max limit 1231582 reached [4982901.904628] VFS: file-max limit 1231582 reached [4982964.930556] VFS: file-max limit 1231582 reached [4982966.352170] VFS: file-max limit 1231582 reached [4982966.649195] top[31095]: segfault at 14 ip 00007fd6ace42700 sp 00007fff20746530 error 6 in libproc-3.2.8.so[7fd6ace3b000+e000] Obviously, the file-max errors look suspicious, being clustered together and recent. # cat /proc/sys/fs/file-max 1231582 # cat /proc/sys/fs/file-nr 1231712 0 1231582 That also looks a bit odd to me, but the thing is, there's no way I have 1.2 million files open on this system. I'm the only one using it, and it's not visible to anyone outside the local network. # lsof | wc 16046 148253 1882901 # ps -ef | wc 574 6104 44260 I saw some documentation saying: file-max & file-nr: The kernel allocates file handles dynamically, but as yet it doesn't free them again. The value in file-max denotes the maximum number of file- handles that the Linux kernel will allocate. When you get lots of error messages about running out of file handles, you might want to increase this limit. Historically, the three values in file-nr denoted the number of allocated file handles, the number of allocated but unused file handles, and the maximum number of file handles. Linux 2.6 always reports 0 as the number of free file handles -- this is not an error, it just means that the number of allocated file handles exactly matches the number of used file handles. Attempts to allocate more file descriptors than file-max are reported with printk, look for "VFS: file-max limit reached". My first reading of this is that the kernel basically has a built-in file descriptor leak, but I find that very hard to believe. It would imply that any system in active use needs to be rebooted every so often to free up the file descriptors. As I said, I can't believe this would be true, since it's normal to me to have Linux systems stay up for months (even years) at a time. On the other hand, I also can't believe that my nearly-idle system is holding over a million files open. Does anyone have any ideas, either for fixes or further diagnosis? I could, of course, just reboot the system, but I don't want this to be a recurring problem every few weeks. As a stopgap measure, I've quit Firefox, which was accounting for almost 2000 lines of lsof output (!) even though I only had one window open, and now I can run 'ls' again, but I doubt that will fix the problem for long. (edit: Oops, spoke too soon. By the time I finished typing out this question, the symptom was/is back) Thanks in advance for any help. And another update: My system was basically unusable, so I decided I had no option but to reboot. But before I did, I carefully quit one process at a time, checking /proc/sys/fs/file-nr after each termination. I found that, predictably, the number of open files gradually went down as I closed things down. Unfortunately, it wasn't a large effect. Yes, I was able to clear up 5000-10000 open files, but there were still over 1.2 million left. I shut down just about everything. All interactive shells, except for the one ssh I left open to finish closing down, httpd, even nfs service. Basically everything in the process table that wasn't a kernel process, and there were still an appalling number of files apparently left open. After the reboot, I found that /proc/sys/fs/file-nr showed about 2000 files open, which is much more reasonable. Starting up 2 Xvnc sessions as usual, along with the dozen or so monitoring windows I like to keep open, brought the total up to about 4000 files. I can see nothing wrong with that, of course, but I've obviously failed to identify the root cause. I'm still looking for ideas, since I definitely expect it to happen again. And another update, the next day: I watched the system carefully, and discovered that /proc/sys/fs/file-nr showed a growth of about 900 open files per hour. I shut down the system's only NFS client for the night, and the growth stopped. Mind you, it didn't free up the resources, but it did at least stop consuming more. Is this a known bug with NFS? I'll be bringing the NFS client back online today, and I'll narrow it down further. If anyone is familiar with this behavior, feel free to jump in with "Yeah, NFS4 has this problem, go back to NFS3" or something like that.

    Read the article

  • can anyone post their windows 7 UILanguages\en-US key?

    - by Sholom
    Hi I am having issues getting Windows 7 to change my system language to English. I followed the normal process but it's not completely changing it. I want to verify if my [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\MUI\UILanguages\en-US] key is set correctly. Current values are: "LCID"=dword:00000409 "Type"=dword:00000091 can anyone with Windows 7 with english as the system language post their said key values? thanks

    Read the article

  • Hour-long shutdown duration "shutting down hyper-v virtual machine management service"

    - by icelava
    I have a Windows 2008 R2 server that is a Hyper-V host (Dell PowerEdge T300). Today for the first time I encountered an odd situation; i lost connection with one of the guest machines but logging on physically it seems the guest OS is still running but no longer contactable via the network. I tried to shut down the guest machine (Windows XP) but it would not shut down, getting stuck in a "Not responding" dialog box that cannot be dismissed. I used the Hyper-V management console to reset the machine and it could not get out of resetting state. I tried to save another Windows 2003 guest machine, and it would be progress with its Saving state (0%). The other running Windows 2003 guest was stuck in the logon dialog. My first suspicion is perhaps one of the Windows update patches this week (10 Nov 2011) may something to do with it, which was still pending a system restart. Well, since I could not do anything with Hyper-V i proceeded with the Windows Update restart, and now it is stuck half an hour at "Shutting down hyper-v virtual machine management service" Prior to restarting I did not observe any hard disk errors reported in the system event log; doubt it is a disk-related condition. Shall I force a hard reboot? UPDATE Ok so i left it hanging over an hour while attending to other matters, and thankfully the host cleanly restarted. I can operate the guest machines fine now. Phew. Hyper-V must have been crawling for some reason. The VMs have been observed to become slow in the past when the host has been up for a long duration (two weeks to a month), but never this slow. Would love to know what types of performance monitoring items i can observe to give a hint why this can happen. UPDATE 2012-02-13 In the months ever since, Hyper-V has stalled into this state another two times. It appears so randomly and without any error event logs to hint what is causing it enter this "drunkard" state. Just an Hyper-V management service timeout. Log Name: System Source: Service Control Manager Date: 13/2/2012 9:16:48 AM Event ID: 7043 Task Category: None Level: Error Keywords: Classic User: N/A Computer: elune Description: The Hyper-V Virtual Machine Management service did not shut down properly after receiving a preshutdown control. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" /> <EventID Qualifiers="49152">7043</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8080000000000000</Keywords> <TimeCreated SystemTime="2012-02-13T01:16:48.882901900Z" /> <EventRecordID>567844</EventRecordID> <Correlation /> <Execution ProcessID="764" ThreadID="8484" /> <Channel>System</Channel> <Computer>elune</Computer> <Security /> </System> <EventData> <Data Name="param1">Hyper-V Virtual Machine Management</Data> </EventData> </Event> The only means out of it is to restart the system.

    Read the article

  • Is Sql Server 2008 R2 unsupported by Operations Manager (SCOM) 2007 R2?

    - by bwerks
    Hey all, I'm performing a test configuration of System Center Operations Manager 2007 R2, on a system prepared with Sql Server 2008 R2. Unfortunately, the Scom 2007 R2 prerequisites verification program seems to be detecting exact versions of Sql Server, and not simply a minimum version, like it claims: "System Center Operations Manager 2007 R2 requires SQL Server 2005 Standard or Enterprise Edition with SP1 and above or SQL Server 2008 Standard or Enterprise edition with SP1 and above. Note: Operations Manager 2007 R2 does not support a 32-bit Operations Manager Operations database, Reporting Server data warehouse or Audit Collection database on a 64-bit operating system." I had hoped that this was just a helper tool that was assisting in getting me off the ground, but unfortunately it seems as if it's actually used as a gate for the installation to proceed. Has anyone encountered this? If so, is there a way to fool the installer into thinking that it has a proper version, or otherwise alert it to my valid configuration?

    Read the article

  • How to customize Windows 7 HAL library during installation (BSOD STOP: 0x000000A5)?

    - by koldovsky
    While trying to install Windows 7 x86 Ultimate on Samsung M40 laptop (Pentium M 1.7 Dothan, 2 GB RAM/ 100 GB HDD) i receive BSOD STOP: 0x000000A5: The bios in this system is not fully ACPI compliant. Please contact your system vendor for an updated bios. The bios on the system is updated to latest version. If ACPI is the real source of the issue it means that I possibly could use another HAL library. In Windows XP it is possible to install system with generic HAL library pressing F7 when installer asks to supply drivers, but on Windows 7 I can't find such option. Ironically, Vista installs and works nice, even if they said that Windows 7 is less demanding for hardware. Windows 7 Advisor also tells nothing suspicious. Can anybody tell me how to customize Windows 7 installer to use generic HAL library (if it is possible, of course) or point me to another solution?

    Read the article

  • Explorer.exe keeps crashing during log in

    - by asif
    I have got a weird problem. My windows 7 has two user accounts (both are administrator). I can log in to one account and do all sort of work. But whenever I try to log in to other account, it shows a blank screen and a messagebox pops up with "windows explorer has stopped working". The options available are: Close the program Check online for a solution and close the program The problem signature is as follows: Problem Event Name: InPageError Error Status Code: c000009c Faulting Media Type: 00000003 OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033 Additional Information 1: 0a9e Additional Information 2: 0a9e372d3b4ad19135b953a78882e789 Additional Information 3: 0a9e Additional Information 4: 0a9e372d3b4ad19135b953a78882e789 If I press alt+ctrl+del and then select start task manager, it also crashes. I can not run any program using runas command (from good profile) too. The task manager and runas programs all show same problem signature. I read the similar question and followed all the steps, but no luck. Later, I viewed the event log and found that, explorer.exe could not access a file. I checked the location but the file is there. The actual message is: Windows cannot access the file C:\Users\testuser\AppData\Local\Microsoft\Windows\Caches\{AFBF9F1A-8EE8-4C77-AF34-C647E37CA0D9}.1.ver0x0000000000000020.db for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Windows Explorer because of this error. The question is, how can I resolve this issue? Should I just delete the file or replace it with another one to stop explorer.exe from crashing? offtopic: What is the content of this file and why it is necessary?

    Read the article

  • WebDAV "PROPFIND" exception in IIS due to network share?

    - by jacko
    We're finding continuous exceptions in our event viewer on our live box to the following exception: [snippet] Process information: Process ID: 3916 Process name: w3wp.exe Account name: NT AUTHORITY\NETWORK SERVICE Exception information: Exception type: HttpException Exception message: Path 'PROPFIND' is forbidden. Thread information: Thread ID: 14 Thread account name: OURDOMAIN\Account Is impersonating: True Stack trace: at System.Web.HttpMethodNotAllowedHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) Other Specs: Windows Server 2003 R2 & IIS 6.0 We've narrowed it down to occuring when people try to access shares on the box from within the network, and have discovered (we think) that its due to the WebDAV web services extension being previously disabled by past staff. The exceptions are being thrown when trying to access directories that are virtual dirs in IIS, and plain old UNC network shares What the implications for enabling the WebDAV extensions on our live web server? And will this solve our problems with the exceptions in our event log?

    Read the article

< Previous Page | 417 418 419 420 421 422 423 424 425 426 427 428  | Next Page >